1 # created by Enigma Language Editor 0.2
2 # (c) 10/2002 ole <olest@gmx.net>
3 # *************************************
4 # * use/modify on your own risk! *
5 # *************************************
9 "Project-Id-Version: tuxbox-enigma 0.1\n"
10 "Report-Msgid-Bugs-To: \n"
11 "POT-Creation-Date: 2006-12-16 21:07+0100\n"
12 "PO-Revision-Date: Thu Aug 11 13:47:25 CEST 2005\n"
13 "Last-Translator: unknown\n"
14 "Language-Team: Urdu / rizwan@portalen.no\n"
16 "Content-Type: text/plain; charset=UTF-8\n"
17 "Content-Transfer-Encoding: 8bit\n"
28 msgid "here you can change your sat/lnb mapping"
31 #: default.esml:417 src/enigma_scan.cpp:49
40 msgid "motor power input difference between running and not running"
44 msgid "send the complete DiSEqC sequence twice"
47 #: default.esml:432 default.esml:480 default.esml:584 src/rotorconfig.cpp:597
52 msgid "send no DiSEqC when only Hi/Lo or H/V changes"
60 msgid "Uncommitted Switch:"
63 #: default.esml:590 default.esml:608 default.esml:627
64 msgid "enable/disable inversion here (ok)"
75 #: default.esml:753 src/timer.cpp:2692
80 msgid "Partition Check"
83 #: default.esml:794 default.esml:818
84 msgid "enter recording end time (0..9, left, right, ok)"
87 #: default.esml:758 default.esml:762
88 msgid "select year (ok)"
92 msgid "increased voltage"
95 #: default.esml:420 default.esml:654
100 msgid "choose the code rate HP (left, right)"
104 msgid "turn 12V output on (for 12V relais) (ok)"
108 msgid "enable/disable use BAT for scan (if exists)"
112 msgid "Skin Selector"
116 msgid "transponder scanned:"
120 msgid "press ok to change event name manually"
124 msgid "recording end time:"
128 msgid "Use motor input power for running detection.. else use timeout"
132 msgid "no circ polariz."
135 #: default.esml:464 default.esml:485
139 #: default.esml:589 default.esml:607
144 msgid "services scanned :"
147 #: default.esml:577 src/parentallock.cpp:101 src/setup_lcd.cpp:118
148 #: src/setup_keyboard.cpp:55 src/setup_osd.cpp:269 src/setup_rc.cpp:127
149 #: src/setup_timezone.cpp:47 src/setupengrab.cpp:102 src/setupnetwork.cpp:648
150 #: src/setupvideo.cpp:180 src/setupvideo.cpp:418 src/tpeditwindow.cpp:112
151 #: src/tpeditwindow.cpp:154
152 msgid "save changes and return"
156 msgid "aborts the transponder scan"
159 #: default.esml:468 default.esml:737 default.esml:897 default.esml:934
163 #: default.esml:442 default.esml:477
168 msgid "remove selected entry"
172 msgid "abc <-> ABC"
180 msgid "select DiSEqC mode (ok)"
184 msgid "Swap Commands"
188 msgid "enter LNB threshold frequency (0..9, ok)"
192 msgid "close motor setup"
196 msgid "insert rotor memory cell for this orbital position"
199 #: default.esml:525 default.esml:544
200 msgid "add only unscrambled services"
203 #: default.esml:536 default.esml:861
208 msgid "select filsystem to format"
215 #: default.esml:428 default.esml:653
220 msgid "Recalc Params:"
223 #: default.esml:588 default.esml:606 default.esml:625
224 msgid "enter transponder frequeny (0..9, left, right)"
227 #: default.esml:467 default.esml:738 default.esml:932
232 msgid "start the transponder scan"
235 #: default.esml:515 default.esml:527 default.esml:546 default.esml:569
243 #: default.esml:667 default.esml:674 default.esml:681 default.esml:689
244 #: default.esml:700 default.esml:711
260 #: stone.esml:463 silver.esml:470
265 msgid "choose the bandwidth (left, right)"
272 #: default.esml:759 default.esml:763
273 msgid "select month (ok)"
277 msgid "enter your latitude (0..9, +, -, ok)"
285 msgid "LNB Configuration"
288 #: default.esml:533 default.esml:552 src/scan.cpp:663
293 msgid "calc param 3 (see your motor manual or let it 00)"
301 msgid "select uncommitted input"
305 msgid "Use Motor Input Power"
309 msgid "when the motor support this, then use"
321 msgid "HTTP Download"
325 msgid "goto prev page (LNB)"
329 msgid "Use gotoXX Function"
341 msgid "for a multiple event enable this"
345 msgid "press ok to select another event"
348 #: default.esml:796 default.esml:808 default.esml:820
352 #: default.esml:435 default.esml:483
372 #: default.esml:775 src/enigma_info.cpp:43
377 msgid "add new Timer (ok)"
381 msgid "to change service press ok"
392 #: stone.esml:464 silver.esml:471
412 #: default.esml:753 src/epgwindow.cpp:113 src/timer.cpp:224
420 #: default.esml:451 default.esml:454 default.esml:465
421 msgid "choose direction"
429 msgid "choose the code rate LP (left, right)"
433 msgid "calc param 1 (see your motor manual or let it 00)"
440 #: default.esml:754 src/epgwindow.cpp:113 src/timer.cpp:224
445 msgid "Transm. Mode:"
449 msgid "12V output on"
453 msgid "shutdown the box to deepstandby (ok)"
457 msgid "edit the end time (0..9, left, right)"
460 #: default.esml:752 src/timer.cpp:2692
465 msgid "recording duration:"
469 msgid "delete expired timer (ok)"
472 #: default.esml:436 default.esml:484
473 msgid "choose the Transponder you wish to find"
477 msgid "add new Transponder to selected sat (ok)"
480 #: default.esml:754 src/timer.cpp:2693
485 msgid "set sleeptimer and close window (ok)"
489 msgid "add a new Satellite"
493 msgid "open transponder scan"
496 #: default.esml:795 default.esml:807
505 msgid "goto advanced motor setup"
508 #: default.esml:750 src/timer.cpp:2692
516 #: default.esml:527 default.esml:546
517 msgid "starts the transponder scan"
529 msgid "choose the transmission mode (left, right)"
541 msgid "search event name for this beg-/end time in epg"
544 #: default.esml:366 default.esml:391 default.esml:412 default.esml:470
545 #: default.esml:577 src/parentallock.cpp:96 src/scan.cpp:1726
546 #: src/setup_lcd.cpp:113 src/setup_keyboard.cpp:50 src/setup_osd.cpp:264
547 #: src/setup_rc.cpp:122 src/setup_rfmod.cpp:144 src/setup_timezone.cpp:42
548 #: src/setupengrab.cpp:97 src/setupnetwork.cpp:643 src/setupnetwork.cpp:1120
549 #: src/setupvideo.cpp:175 src/setupvideo.cpp:413 src/tpeditwindow.cpp:106
550 #: src/tpeditwindow.cpp:151
554 #: default.esml:752 src/epgwindow.cpp:113 src/timer.cpp:224
558 #: chk_blue2.esml:314
562 #: default.esml:433 default.esml:481
563 msgid "choose the Satellite you wish to find"
567 msgid "choose entry to edit or remove"
583 msgid "add to table/existing will be overwritten"
594 #: default.esml:345 default.esml:423
599 msgid "enter manual pids"
606 #: default.esml:797 default.esml:809 default.esml:821
610 #: default.esml:594 default.esml:612
614 #: default.esml:425 default.esml:655
631 msgid "choose polarity (left, right)"
634 #: default.esml:590 default.esml:608 default.esml:627
639 msgid "edit the start time (0..9, left, right)"
643 msgid "enter LNB lowband offset frequency (0..9, ok)"
646 #: chk_blue2.esml:318
650 #: default.esml:611 default.esml:629
651 msgid "choose modulation (left, right)"
654 #: default.esml:755 src/timer.cpp:2693
663 msgid "select what todo after event"
666 #: default.esml:461 src/tpeditwindow.cpp:71
667 msgid "Orbital Position:"
671 msgid "DiSEqC Repeats:"
675 msgid "enter LNB highband offset frequency (0..9, ok)"
678 #: default.esml:796 default.esml:820
679 msgid "shutdown the box after recording (ok)"
683 msgid "Please choose your DiSEqC-Configuration:"
686 #: default.esml:792 default.esml:816
698 #: default.esml:599 default.esml:617
706 #: default.esml:342 default.esml:418
710 #: default.esml:358 src/enigma_scan.cpp:48
711 msgid "Satellite Configuration"
715 msgid "save data and close window"
726 #: stone.esml:465 silver.esml:472
731 msgid "edit selected transponder (ok)"
735 msgid "save in motor"
743 msgid "do a filesystem check"
747 msgid "initialize the disk for use with the dreambox"
759 msgid "select DiSEqC parameter (ok)"
766 #: default.esml:587 default.esml:605 default.esml:624
771 msgid "remove selected satellite"
774 #: default.esml:598 default.esml:616
775 msgid "enter symbol rate (0..9, left, right)"
779 msgid "press ok to enter the name"
787 msgid "delete the current selected timer (ok)"
791 msgid "select MiniDiSEqC parameter (ok)"
795 msgid "Software Version:"
799 msgid "enter your longitude (0..9, +, -, ok)"
803 msgid "abc2 <-> 2abc"
807 msgid "remove the selected Satellite"
811 msgid "goto standby (ok)"
815 msgid "choose wished satellite (ok)"
819 msgid "show extended configuration"
823 msgid "choose what you want to do"
826 #: default.esml:757 src/timer.cpp:2692
831 msgid "Number in motor:"
847 msgid "Sat/LNB mapping:"
851 msgid "save changes and use current selected LNB for the chosen satellite"
856 "save changes and use the selected LNB (in first page) for the choosen "
861 msgid "DiSEqC Parameter:"
865 msgid "0,5V higher LNB Voltage (for long cables) (ok)"
873 msgid "enable/disable check ONIT on any transponder"
893 msgid "Set Sleeptimer"
897 msgid "press ok to change"
904 #: chk_blue2.esml:313
908 #: default.esml:798 default.esml:822
909 msgid "set recording end time and close window (ok)"
913 msgid "close Satellite Configuration"
916 #: default.esml:729 default.esml:735 stone.esml:462 silver.esml:469
932 #: default.esml:392 default.esml:471
936 #: default.esml:597 default.esml:615
940 #: default.esml:798 default.esml:810 default.esml:822
945 msgid "press left or right to move motor"
949 msgid "calc param 2 (see your motor manual or let it 00)"
953 msgid "select the timer type (ok)"
956 #: default.esml:522 default.esml:542
957 msgid "choose satellite/cable provider (ok)"
969 msgid "Counter(Movement)"
973 msgid "enable/disable initiate network search"
980 #: chk_blue2.esml:317
985 msgid "select your configuration here"
993 msgid "select DiSEqC repeats (ok)"
996 #: default.esml:595 default.esml:613 default.esml:631
997 msgid "choose the FEC (left, right)"
1000 #: default.esml:911 src/system_settings.cpp:60
1001 msgid "OSD Language"
1005 msgid "Software upgrade..."
1013 msgid "select skin and press ok or choose save"
1016 #: default.esml:760 default.esml:764
1017 msgid "select day (ok)"
1021 msgid "change circular to linear polarization"
1025 msgid "goto next page (DiSEqC)"
1029 msgid "select sat(up/down), ok(edit), green(add new), red(delete)"
1053 msgid "Repeated timer"
1057 msgid "enter stored satellite pos"
1061 msgid "Sequence repeat"
1065 msgid "status output:"
1076 #: default.esml:797 default.esml:821
1077 msgid "goto standby after recording (ok)"
1080 #: default.esml:513 default.esml:525 default.esml:544
1085 msgid "Constellation:"
1088 #: default.esml:756 src/timer.cpp:2693
1093 msgid "(0..9, left, right, ok)"
1097 msgid "swaps committed and uncommitted DiSEqC Commands"
1105 msgid "network search"
1109 msgid "add only not scrambled services"
1112 #: lib/dvb/dvbci.cpp:61 lib/dvb/dvbci.cpp:110 lib/dvb/dvbci.cpp:128
1113 #: lib/dvb/dvbci.cpp:1280
1117 #: lib/dvb/dvbwidgets.cpp:66
1121 #: lib/dvb/dvbwidgets.cpp:67
1125 #: lib/dvb/dvbwidgets.cpp:71 lib/dvb/dvbwidgets.cpp:80
1129 #: lib/dvb/dvbwidgets.cpp:72 lib/dvb/dvbwidgets.cpp:82
1133 #: lib/dvb/dvbwidgets.cpp:73
1137 #: lib/dvb/dvbwidgets.cpp:74 lib/dvb/dvbwidgets.cpp:83
1141 #: lib/dvb/dvbwidgets.cpp:75
1145 #: lib/dvb/dvbwidgets.cpp:76
1149 #: lib/dvb/dvbwidgets.cpp:81
1153 #: lib/dvb/service.cpp:202 lib/dvb/service.cpp:230 src/enigma_bouquet.cpp:212
1154 #: src/enigma_main.cpp:4381 src/enigma_main.cpp:4393 src/parentallock.cpp:123
1155 #: src/parentallock.cpp:155 src/timer.cpp:2403
1159 #: lib/dvb/servicedvb.cpp:742
1160 msgid "Providers (TV)"
1163 #: lib/dvb/servicedvb.cpp:746
1164 msgid "Providers (Radio)"
1167 #: lib/dvb/servicedvb.cpp:750
1168 msgid "Providers (Data)"
1171 #: lib/dvb/servicedvb.cpp:755
1172 msgid "All services (TV)"
1175 #: lib/dvb/servicedvb.cpp:759
1176 msgid "All services (Radio)"
1179 #: lib/dvb/servicedvb.cpp:763
1180 msgid "All services (Data)"
1183 #: lib/dvb/servicedvb.cpp:770
1184 msgid "Satellites (TV)"
1187 #: lib/dvb/servicedvb.cpp:774
1188 msgid "Satellites (Radio)"
1191 #: lib/dvb/servicedvb.cpp:778
1192 msgid "Satellites (Data)"
1195 #: lib/dvb/servicedvb.cpp:1161
1199 #: lib/dvb/servicedvb.cpp:1169
1203 #: lib/dvb/servicedvb.cpp:1177
1204 msgid " - new found"
1207 #: lib/dvb/servicedvb.cpp:1181
1208 msgid "current transponder"
1211 #: lib/dvb/servicemp3.cpp:186
1212 msgid "Connecting..."
1215 #: lib/dvb/servicemp3.cpp:397
1216 msgid "buffering..."
1219 #: lib/dvb/servicemp3.cpp:553
1223 #: lib/dvb/serviceplaylist.cpp:124
1225 msgid " (%d entries)"
1228 #: lib/dvb/servicestructure.cpp:10
1232 #: lib/dvb/servicestructure.cpp:11 src/enigma_mainmenu.cpp:54
1233 #: src/enigma_mainmenu.cpp:185
1237 #: lib/dvb/servicestructure.cpp:12
1241 #: lib/dvb/servicestructure.cpp:14
1245 #: lib/dvb/servicestructure.cpp:16
1249 #: lib/dvb/servicestructure.cpp:17 src/enigma_main.cpp:7672
1250 #: src/sselect.cpp:388 src/sselect.cpp:395
1254 #: lib/gui/emessage.cpp:120
1258 #: lib/gui/emessage.cpp:121
1262 #: lib/gui/emessage.cpp:122
1266 #: lib/gui/emessage.cpp:123
1270 #: lib/gui/listbox.cpp:861
1271 msgid "no description available"
1274 #: lib/gui/textinput.cpp:19
1275 msgid "enable/disable capslock"
1278 #: lib/gui/textinput.cpp:20
1279 msgid "put numbers before/after characters"
1282 #: lib/gui/textinput.cpp:21
1283 msgid "insert blank at cursor position"
1286 #: lib/gui/textinput.cpp:22
1287 msgid "remove the character at the cursor position"
1290 #: lib/gui/textinput.cpp:23
1291 msgid "remove the character before the cursor position"
1294 #: lib/gui/textinput.cpp:24
1295 msgid "shows the textinputfield help"
1298 #: lib/gui/textinput.cpp:35
1299 msgid "press ok to save (help is available)"
1302 #: lib/gui/textinput.cpp:56
1303 msgid "press ok to save"
1306 #: src/channelinfo.cpp:73
1310 #: src/channelinfo.cpp:73
1314 #: src/channelinfo.cpp:73
1318 #: src/channelinfo.cpp:73
1322 #: src/channelinfo.cpp:74
1326 #: src/channelinfo.cpp:74
1330 #: src/channelinfo.cpp:74
1334 #: src/channelinfo.cpp:74
1338 #: src/channelinfo.cpp:77
1342 #: src/channelinfo.cpp:77
1346 #: src/channelinfo.cpp:77
1350 #: src/channelinfo.cpp:77
1354 #: src/channelinfo.cpp:77
1358 #: src/channelinfo.cpp:81
1362 #: src/channelinfo.cpp:81
1366 #: src/channelinfo.cpp:81
1370 #: src/channelinfo.cpp:81
1374 #: src/channelinfo.cpp:85
1378 #: src/channelinfo.cpp:85
1379 msgid "Special Event"
1382 #: src/channelinfo.cpp:85
1386 #: src/channelinfo.cpp:85
1390 #: src/channelinfo.cpp:85
1394 #: src/channelinfo.cpp:85
1398 #: src/channelinfo.cpp:86
1402 #: src/channelinfo.cpp:86
1403 msgid "Motor Sports"
1406 #: src/channelinfo.cpp:86
1407 msgid "Water Sports"
1410 #: src/channelinfo.cpp:86
1411 msgid "Winter Sports"
1414 #: src/channelinfo.cpp:86
1418 #: src/channelinfo.cpp:87
1419 msgid "Martial Sports"
1422 #: src/channelinfo.cpp:90
1426 #: src/channelinfo.cpp:90
1430 #: src/channelinfo.cpp:90
1434 #: src/channelinfo.cpp:90
1438 #: src/channelinfo.cpp:90
1442 #: src/channelinfo.cpp:91
1446 #: src/channelinfo.cpp:95
1450 #: src/channelinfo.cpp:95
1454 #: src/channelinfo.cpp:95
1458 #: src/channelinfo.cpp:95
1462 #: src/channelinfo.cpp:95
1466 #: src/channelinfo.cpp:95
1470 #: src/channelinfo.cpp:95
1474 #: src/channelinfo.cpp:99
1478 #: src/channelinfo.cpp:99
1482 #: src/channelinfo.cpp:99
1486 #: src/channelinfo.cpp:99
1490 #: src/channelinfo.cpp:99
1494 #: src/channelinfo.cpp:99
1498 #: src/channelinfo.cpp:100
1502 #: src/channelinfo.cpp:100
1503 msgid "Experimental"
1506 #: src/channelinfo.cpp:100
1510 #: src/channelinfo.cpp:100
1514 #: src/channelinfo.cpp:100
1518 #: src/channelinfo.cpp:100
1522 #: src/channelinfo.cpp:103
1526 #: src/channelinfo.cpp:103
1530 #: src/channelinfo.cpp:103
1534 #: src/channelinfo.cpp:103
1535 msgid "Remark. People"
1538 #: src/channelinfo.cpp:107
1542 #: src/channelinfo.cpp:107
1546 #: src/channelinfo.cpp:107
1550 #: src/channelinfo.cpp:107
1554 #: src/channelinfo.cpp:107
1558 #: src/channelinfo.cpp:107
1562 #: src/channelinfo.cpp:108
1566 #: src/channelinfo.cpp:108
1570 #: src/channelinfo.cpp:111
1574 #: src/channelinfo.cpp:111
1578 #: src/channelinfo.cpp:111
1582 #: src/channelinfo.cpp:111
1586 #: src/channelinfo.cpp:111
1590 #: src/channelinfo.cpp:111
1594 #: src/channelinfo.cpp:112
1598 #: src/channelinfo.cpp:112
1602 #: src/channelinfo.cpp:115
1606 #: src/channelinfo.cpp:115
1610 #: src/channelinfo.cpp:115
1614 #: src/channelinfo.cpp:115
1618 #: src/channelinfo.cpp:244
1619 msgid "no data for this service avail"
1622 #: src/channelinfo.cpp:276
1629 #: src/channelinfo.cpp:277
1633 #: src/engrab.cpp:37 src/enigma_event.cpp:298 src/enigma_event.cpp:307
1634 #: src/timer.cpp:2340
1635 msgid "no description is available"
1638 #: src/enigma.cpp:275
1640 "Welcome to enigma.\n"
1642 "Please do a transponder scan first.\n"
1643 "(mainmenu > setup > channels > transponder scan)"
1646 #: src/enigma.cpp:277
1647 msgid "First start of enigma"
1650 #: src/enigma_bouquet.cpp:18
1651 msgid "Bouquet Type"
1654 #: src/enigma_bouquet.cpp:21
1658 #: src/enigma_bouquet.cpp:22
1662 #: src/enigma_bouquet.cpp:24
1666 #: src/enigma_bouquet.cpp:38 src/enigma_setup.cpp:40
1667 msgid "Service Organising"
1670 #: src/enigma_bouquet.cpp:42
1671 msgid "Create new bouquet"
1674 #: src/enigma_bouquet.cpp:42
1675 msgid "create new empty bouquet"
1678 #: src/enigma_bouquet.cpp:43
1679 msgid "Add services to bouquet"
1682 #: src/enigma_bouquet.cpp:43
1683 msgid "add multiple services to a specific bouquet"
1686 #: src/enigma_bouquet.cpp:44
1687 msgid "Edit bouquets"
1690 #: src/enigma_bouquet.cpp:44
1691 msgid "sort,rename,delete services/bouquets "
1694 #: src/enigma_bouquet.cpp:48
1695 msgid "Lock/Unlock Services"
1698 #: src/enigma_bouquet.cpp:48
1699 msgid "lock,unlock services (parental locking)"
1702 #: src/enigma_ci.cpp:34
1703 msgid "Common Interface Modules"
1706 #: src/enigma_ci.cpp:42
1707 msgid "Common Interface Module"
1710 #: src/enigma_ci.cpp:48 src/enigma_ci.cpp:77
1714 #: src/enigma_ci.cpp:51 src/enigma_ci.cpp:80
1715 msgid "reset the Common Interface module"
1718 #: src/enigma_ci.cpp:57 src/enigma_ci.cpp:86
1722 #: src/enigma_ci.cpp:60 src/enigma_ci.cpp:89
1723 msgid "send the ca-pmt to CI"
1726 #: src/enigma_ci.cpp:66 src/enigma_ci.cpp:95
1727 msgid "waiting for module"
1730 #: src/enigma_ci.cpp:69 src/enigma_ci.cpp:98
1731 msgid "enter Common Interface menu (mmi)"
1734 #: src/enigma_ci.cpp:112
1735 msgid "can handle two services"
1738 #: src/enigma_ci.cpp:113
1739 msgid "can your CI descramble two services at the same time?"
1742 #: src/enigma_ci.cpp:171 src/enigma_ci.cpp:177
1743 msgid "resetting....please wait"
1746 #: src/enigma_ci.cpp:223
1747 msgid "Common Interface Module - mmi"
1750 #: src/enigma_ci.cpp:224
1751 msgid "waiting for CI answer..."
1754 #: src/enigma_dyn.cpp:2119
1755 msgid "External Message"
1758 #: src/enigma_epg.cpp:82
1759 msgid "press 1 ... 6 to select count of visible hours"
1762 #: src/enigma_event.cpp:21
1763 msgid "enigma event view"
1766 #: src/enigma_event.cpp:22
1767 msgid "closes the Event View"
1770 #: src/enigma_event.cpp:222
1772 msgid "Original duration: %d min"
1775 #: src/enigma_event.cpp:288 src/streaminfo.cpp:585 src/streaminfo.cpp:643
1776 msgid "no information is available"
1779 #: src/enigma_info.cpp:39
1783 #: src/enigma_info.cpp:42 src/streaminfo.cpp:554
1787 #: src/enigma_info.cpp:42
1788 msgid "open the Streaminfo"
1791 #: src/enigma_info.cpp:43
1792 msgid "open the about dialog"
1795 #: src/enigma_info.cpp:150
1796 msgid "Frontend: Satellite"
1799 #: src/enigma_info.cpp:153
1800 msgid "Frontend: Cable"
1803 #: src/enigma_info.cpp:156
1804 msgid "Frontend: Terrestrial"
1807 #: src/enigma_info.cpp:159
1808 msgid "Frontend: Unknown"
1811 #: src/enigma_info.cpp:207 src/streaminfo.cpp:344 src/streaminfo.cpp:355
1812 #: src/streaminfo.cpp:367 src/streaminfo.cpp:379 src/streaminfo.cpp:391
1813 #: src/streaminfo.cpp:482 src/streaminfo.cpp:521
1817 #: src/enigma_info.cpp:213 src/timer.cpp:2757 src/upgrade.cpp:274
1821 #: src/enigma_info.cpp:218
1825 #: src/enigma_info.cpp:219
1829 #: src/enigma_info.cpp:220
1833 #: src/enigma_main.cpp:85
1837 #: src/enigma_main.cpp:86
1838 msgid "show main menu"
1841 #: src/enigma_main.cpp:87
1842 msgid "go to standby (press)"
1845 #: src/enigma_main.cpp:88
1846 msgid "go to standby without menu (press)"
1849 #: src/enigma_main.cpp:89
1850 msgid "go to standby (repeat)"
1853 #: src/enigma_main.cpp:90
1854 msgid "go to standby (release)"
1857 #: src/enigma_main.cpp:92
1858 msgid "show infobar"
1861 #: src/enigma_main.cpp:93
1862 msgid "hide infobar"
1865 #: src/enigma_main.cpp:94
1866 msgid "show infobar or EPG"
1869 #: src/enigma_main.cpp:95
1870 msgid "show service selector"
1873 #: src/enigma_main.cpp:96
1874 msgid "show subservices/NVOD"
1877 #: src/enigma_main.cpp:97
1878 msgid "show audio selector"
1881 #: src/enigma_main.cpp:98
1882 msgid "show Videotext"
1885 #: src/enigma_main.cpp:99
1886 msgid "show extension Plugins"
1889 #: src/enigma_main.cpp:100
1890 msgid "show epg schedule list"
1893 #: src/enigma_main.cpp:101
1894 msgid "show extended info"
1897 #: src/enigma_main.cpp:102
1898 msgid "zap to next subService"
1901 #: src/enigma_main.cpp:103
1902 msgid "zap to prev subService"
1905 #: src/enigma_main.cpp:104
1906 msgid "quickzap next"
1909 #: src/enigma_main.cpp:105
1910 msgid "quickzap prev"
1913 #: src/enigma_main.cpp:107
1914 msgid "playlist/history next"
1917 #: src/enigma_main.cpp:108
1918 msgid "playlist/history prev"
1921 #: src/enigma_main.cpp:110
1922 msgid "service list and down"
1925 #: src/enigma_main.cpp:111
1926 msgid "service list and up"
1929 #: src/enigma_main.cpp:113 src/enigma_main.cpp:170
1933 #: src/enigma_main.cpp:114 src/enigma_main.cpp:171
1937 #: src/enigma_main.cpp:115 src/enigma_main.cpp:172
1938 msgid "toggle mute flag"
1941 #: src/enigma_main.cpp:117 src/enigma_main.cpp:130
1942 msgid "stop playback"
1945 #: src/enigma_main.cpp:118 src/enigma_main.cpp:131
1946 msgid "pause playback"
1949 #: src/enigma_main.cpp:119 src/enigma_main.cpp:132
1950 msgid "resume playback"
1953 #: src/enigma_main.cpp:120 src/enigma_main.cpp:133 src/enigma_main.cpp:3126
1957 #: src/enigma_main.cpp:122 src/enigma_main.cpp:135
1958 msgid "start skipping forward"
1961 #: src/enigma_main.cpp:123 src/enigma_main.cpp:136
1962 msgid "repeat skipping forward"
1965 #: src/enigma_main.cpp:124 src/enigma_main.cpp:137
1966 msgid "stop skipping forward"
1969 #: src/enigma_main.cpp:126 src/enigma_main.cpp:139
1970 msgid "start skipping reverse"
1973 #: src/enigma_main.cpp:127 src/enigma_main.cpp:140
1974 msgid "repeat skipping reverse"
1977 #: src/enigma_main.cpp:128 src/enigma_main.cpp:141
1978 msgid "stop skipping reverse"
1981 #: src/enigma_main.cpp:143
1982 msgid "open the serviceselector and show bouquets"
1985 #: src/enigma_main.cpp:144
1986 msgid "open the serviceselector and show provider"
1989 #: src/enigma_main.cpp:145
1990 msgid "open the serviceselector and show recorded movies"
1993 #: src/enigma_main.cpp:146
1994 msgid "open the serviceselector and shows the playlist"
1997 #: src/enigma_main.cpp:148 src/sselect.cpp:132
1998 msgid "switch to TV mode"
2001 #: src/enigma_main.cpp:149 src/sselect.cpp:133
2002 msgid "switch to Radio mode"
2005 #: src/enigma_main.cpp:150 src/sselect.cpp:134
2006 msgid "switch to File mode"
2009 #: src/enigma_main.cpp:152
2010 msgid "toggle DVR panel"
2013 #: src/enigma_main.cpp:153
2014 msgid "toggle index mark"
2017 #: src/enigma_main.cpp:155
2018 msgid "seek to next index mark"
2021 #: src/enigma_main.cpp:156
2022 msgid "seek to previous index mark"
2025 #: src/enigma_main.cpp:336
2029 #: src/enigma_main.cpp:346
2033 #: src/enigma_main.cpp:387
2037 #: src/enigma_main.cpp:405
2041 #: src/enigma_main.cpp:516
2045 #: src/enigma_main.cpp:644 src/enigma_main.cpp:828
2049 #: src/enigma_main.cpp:660 src/enigma_main.cpp:844
2050 msgid " Left Mono >"
2053 #: src/enigma_main.cpp:661 src/enigma_main.cpp:845
2057 #: src/enigma_main.cpp:662 src/enigma_main.cpp:846
2058 msgid "< Right Mono "
2061 #: src/enigma_main.cpp:692
2062 msgid "Audiotrack(AC3)"
2065 #: src/enigma_main.cpp:692
2069 #: src/enigma_main.cpp:884
2070 msgid "no subtitles"
2073 #: src/enigma_main.cpp:925
2074 msgid "multiple Services"
2077 #: src/enigma_main.cpp:936 src/enigma_main.cpp:987 src/enigma_main.cpp:1001
2078 msgid "enable quickzap"
2081 #: src/enigma_main.cpp:944
2082 msgid "add to bouquet"
2085 #: src/enigma_main.cpp:983
2086 msgid "disable quickzap"
2089 #: src/enigma_main.cpp:1081
2093 #: src/enigma_main.cpp:1086
2097 #: src/enigma_main.cpp:1161
2099 msgid "Please wait while the motor is turning to %d.%d°%c ...."
2102 #: src/enigma_main.cpp:1161
2106 #: src/enigma_main.cpp:1255
2107 msgid "recorded movies"
2110 #: src/enigma_main.cpp:1376
2111 msgid "Bouquets (TV)"
2114 #: src/enigma_main.cpp:1387
2115 msgid "Bouquets (File)"
2118 #: src/enigma_main.cpp:1399
2119 msgid "Bouquets (Radio)"
2122 #: src/enigma_main.cpp:1448
2123 msgid "Favourites (TV)"
2126 #: src/enigma_main.cpp:1454
2127 msgid "Favourites (Radio)"
2130 #: src/enigma_main.cpp:1460
2131 msgid "Favourites (File)"
2134 #: src/enigma_main.cpp:1895
2135 msgid "please wait while initializing Common Interface ..."
2138 #: src/enigma_main.cpp:2202
2139 msgid "no EPG available"
2142 #: src/enigma_main.cpp:2871
2143 msgid "ShutdownTimer"
2146 #: src/enigma_main.cpp:2871
2150 #: src/enigma_main.cpp:3126
2151 msgid "Sorry, you cannot record this service."
2154 #: src/enigma_main.cpp:3333
2155 msgid "Show recorded movies?"
2158 #: src/enigma_main.cpp:3333
2159 msgid "recording finished"
2162 #: src/enigma_main.cpp:3687
2163 msgid "Shutdown your Receiver now?"
2166 #: src/enigma_main.cpp:3687 src/enigma_main.cpp:3707
2167 msgid "Timer Message"
2170 #: src/enigma_main.cpp:3707
2171 msgid "Go to Standby now?"
2174 #: src/enigma_main.cpp:3764 src/enigma_main.cpp:3826
2175 msgid "Enter new name:"
2178 #: src/enigma_main.cpp:3765 src/enigma_main.cpp:3827
2179 msgid "Rename entry"
2182 #: src/enigma_main.cpp:3889
2183 msgid "Sorry, you cannot delete this service."
2186 #: src/enigma_main.cpp:3889
2187 msgid "delete service"
2190 #: src/enigma_main.cpp:3916 src/enigma_main.cpp:4040
2193 "You are trying to delete '%s'.\n"
2197 #: src/enigma_main.cpp:3917
2198 msgid "Delete recorded stream"
2201 #: src/enigma_main.cpp:3948
2203 "This is a complete Bouquet!\n"
2207 #: src/enigma_main.cpp:3949
2208 msgid "Delete bouquet"
2211 #: src/enigma_main.cpp:4041
2215 #: src/enigma_main.cpp:4113
2216 msgid "Enter new Filename:"
2219 #: src/enigma_main.cpp:4114
2223 #: src/enigma_main.cpp:4146
2224 msgid "Enter new name for the bouquet:"
2227 #: src/enigma_main.cpp:4147
2228 msgid "Rename bouquet"
2231 #: src/enigma_main.cpp:4172
2232 msgid "Enter name for the new bouquet:"
2235 #: src/enigma_main.cpp:4173
2236 msgid "Add new bouquet"
2239 #: src/enigma_main.cpp:4228
2243 #: src/enigma_main.cpp:4229
2244 msgid "Enter marker name:"
2247 #: src/enigma_main.cpp:4230
2248 msgid "create marker"
2251 #: src/enigma_main.cpp:4271
2252 msgid "unnamed bouquet"
2255 #: src/enigma_main.cpp:4635 src/enigma_main.cpp:4636
2256 msgid "This directory doesn't contain anything playable!"
2259 #: src/enigma_main.cpp:4636
2263 #: src/enigma_main.cpp:5130
2265 "A timer based recording is currently in progress!\n"
2266 "This stops the timer, and recording!"
2269 #: src/enigma_main.cpp:5140
2271 "A recording is currently in progress!\n"
2272 "This stops the recording!"
2275 #: src/enigma_main.cpp:5152
2277 "A timer event is currently in progress!\n"
2278 "This stops the timer event!"
2281 #: src/enigma_main.cpp:5160
2282 msgid "Really do this?"
2285 #: src/enigma_main.cpp:5259
2286 msgid "please wait until the timer has started the recording (max 10 seconds)"
2289 #: src/enigma_main.cpp:5260
2293 #: src/enigma_main.cpp:5936
2294 msgid "Record failed due to inaccessable storage."
2297 #: src/enigma_main.cpp:5938
2299 "Record stopped due to full harddisk. Delete some recordings and try again."
2302 #: src/enigma_main.cpp:5940
2304 "Record failed due to an write error during recording. Check for filesystem "
2308 #: src/enigma_main.cpp:5942
2309 msgid "record failed"
2312 #: src/enigma_main.cpp:6181 src/enigma_main.cpp:6182
2313 msgid "One moment please..."
2316 #: src/enigma_main.cpp:6182 src/enigma_main.cpp:6186 src/enigma_main.cpp:6194
2317 #: src/enigma_main.cpp:6201 src/enigma_main.cpp:6207 src/enigma_main.cpp:6212
2318 #: src/enigma_main.cpp:6217 src/timer.cpp:2284
2322 #: src/enigma_main.cpp:6185 src/enigma_main.cpp:6186
2323 msgid "Service could not be found !"
2326 #: src/enigma_main.cpp:6193 src/enigma_main.cpp:6194
2327 msgid "This service could not be descrambled"
2330 #: src/enigma_main.cpp:6200 src/enigma_main.cpp:6201
2331 msgid "This service doesn't currently send a signal"
2334 #: src/enigma_main.cpp:6205 src/enigma_main.cpp:6207
2335 msgid "This content could not be displayed"
2338 #: src/enigma_main.cpp:6210 src/enigma_main.cpp:6212
2339 msgid "NVOD Service - please select a starttime"
2342 #: src/enigma_main.cpp:6215 src/enigma_main.cpp:6217
2343 msgid "Unknown error!!"
2346 #: src/enigma_main.cpp:6743 src/sselect.cpp:394
2350 #: src/enigma_main.cpp:6745
2354 #: src/enigma_main.cpp:7197
2355 msgid "Service Menu"
2358 #: src/enigma_main.cpp:7214 src/sselect.cpp:130
2359 msgid "add service to playlist"
2362 #: src/enigma_main.cpp:7214
2363 msgid "add selected service to the playlist"
2366 #: src/enigma_main.cpp:7225
2367 msgid "remove 'new found flag'"
2370 #: src/enigma_main.cpp:7225
2371 msgid "select to remove the 'new found flag'"
2374 #: src/enigma_main.cpp:7228
2375 msgid "create new bouquet"
2378 #: src/enigma_main.cpp:7228
2379 msgid "select to create a new bouquet"
2382 #: src/enigma_main.cpp:7240
2383 msgid "duplicate bouquet"
2386 #: src/enigma_main.cpp:7240
2387 msgid "duplicate the complete bouquet with all content"
2390 #: src/enigma_main.cpp:7246 src/enigma_main.cpp:7306 src/enigma_main.cpp:7311
2391 #: src/enigma_main.cpp:7329
2392 msgid "add to specific bouquet"
2395 #: src/enigma_main.cpp:7246
2396 msgid "add the selected service to another bouquet"
2399 #: src/enigma_main.cpp:7248
2403 #: src/enigma_main.cpp:7248
2404 msgid "create a new marker in the current bouquet"
2407 #: src/enigma_main.cpp:7257 src/enigma_main.cpp:7271 src/enigma_main.cpp:7313
2408 #: src/sselect.cpp:373
2412 #: src/enigma_main.cpp:7257
2413 msgid "rename the current selected bouquet"
2416 #: src/enigma_main.cpp:7271 src/enigma_main.cpp:7313
2417 msgid "rename the current selected service/movie"
2420 #: src/enigma_main.cpp:7275 src/enigma_main.cpp:7314 src/sselect.cpp:371
2424 #: src/enigma_main.cpp:7275 src/enigma_main.cpp:7314
2425 msgid "delete the current selected service/movie"
2428 #: src/enigma_main.cpp:7281
2429 msgid "set as startup service"
2432 #: src/enigma_main.cpp:7281
2433 msgid "currently selected service will be selected on startup"
2436 #: src/enigma_main.cpp:7282 src/enigma_main.cpp:7317
2437 msgid "reset startup service"
2440 #: src/enigma_main.cpp:7282
2441 msgid "last selected service will be selected on startup"
2444 #: src/enigma_main.cpp:7289
2445 msgid "disable move mode"
2448 #: src/enigma_main.cpp:7289
2449 msgid "switch move mode off"
2452 #: src/enigma_main.cpp:7291
2453 msgid "enable move mode"
2456 #: src/enigma_main.cpp:7291
2457 msgid "activate mode to simply change the entry order"
2460 #: src/enigma_main.cpp:7300
2461 msgid "copy to bouquet list"
2464 #: src/enigma_main.cpp:7300
2465 msgid "copy the selected provider to the bouquet list"
2468 #: src/enigma_main.cpp:7306 src/enigma_main.cpp:7311
2469 msgid "add the selected service to a selectable bouquet"
2472 #: src/enigma_main.cpp:7316
2473 msgid "set as startup"
2476 #: src/enigma_main.cpp:7316
2477 msgid "set the current selected service/movie as startup service"
2480 #: src/enigma_main.cpp:7317
2481 msgid "reset startup"
2484 #: src/enigma_main.cpp:7329
2485 msgid "add the selected file to a selectable bouquet"
2488 #: src/enigma_main.cpp:7331
2492 #: src/enigma_main.cpp:7331
2493 msgid "delete the selected file (and all corresponding ts files"
2496 #: src/enigma_main.cpp:7332
2500 #: src/enigma_main.cpp:7332
2501 msgid "rename the selected file (and all corresponding ts files"
2504 #: src/enigma_main.cpp:7346
2505 msgid "disable edit mode"
2508 #: src/enigma_main.cpp:7346
2509 msgid "disable the edit mode"
2512 #: src/enigma_main.cpp:7348
2513 msgid "enable edit mode"
2516 #: src/enigma_main.cpp:7348
2517 msgid "activate mode to simply add many services to a selectable bouquet"
2520 #: src/enigma_main.cpp:7358
2524 #: src/enigma_main.cpp:7358
2525 msgid "do parental-unlock the selected service or file"
2528 #: src/enigma_main.cpp:7360
2532 #: src/enigma_main.cpp:7360
2533 msgid "do parentallock the selected service or file"
2536 #: src/enigma_main.cpp:7364
2537 msgid "disable parental lock"
2540 #: src/enigma_main.cpp:7364
2541 msgid "temporary disable the parental locking"
2544 #: src/enigma_main.cpp:7366
2545 msgid "enable parental lock"
2548 #: src/enigma_main.cpp:7366
2549 msgid "re-enable the parental locking"
2552 #: src/enigma_main.cpp:7384
2553 msgid "Shutdown/Standby Menu"
2556 #: src/enigma_main.cpp:7395 src/enigma_main.cpp:7398
2560 #: src/enigma_main.cpp:7395 src/enigma_main.cpp:7403
2561 msgid "restart your dreambox"
2564 #: src/enigma_main.cpp:7398
2565 msgid "restart your receiver"
2568 #: src/enigma_main.cpp:7402 src/enigma_main.cpp:7406
2569 msgid "shutdown now"
2572 #: src/enigma_main.cpp:7402
2573 msgid "shutdown your dreambox"
2576 #: src/enigma_main.cpp:7403 src/enigma_main.cpp:7407
2580 #: src/enigma_main.cpp:7406
2581 msgid "shutdown your dbox-2"
2584 #: src/enigma_main.cpp:7407
2585 msgid "restart your dbox-2"
2588 #: src/enigma_main.cpp:7411
2589 msgid "goto standby"
2592 #: src/enigma_main.cpp:7411
2593 msgid "goto standby mode"
2596 #: src/enigma_main.cpp:7412
2597 msgid "set sleeptimer"
2600 #: src/enigma_main.cpp:7412
2601 msgid "set a sleep timer"
2604 #: src/enigma_main.cpp:7532
2608 #: src/enigma_main.cpp:7538
2609 msgid "stop record now"
2612 #: src/enigma_main.cpp:7538
2613 msgid "immediate stop the recording"
2616 #: src/enigma_main.cpp:7540
2617 msgid "set record duration"
2620 #: src/enigma_main.cpp:7540
2621 msgid "set the recording time (in minutes)"
2624 #: src/enigma_main.cpp:7541
2625 msgid "set record stop time"
2628 #: src/enigma_main.cpp:7541
2629 msgid "set the recording end time"
2632 #: src/enigma_main.cpp:7636
2633 msgid "press ok to start edit mode"
2636 #: src/enigma_mainmenu.cpp:26
2637 msgid "enigma mainmenu"
2640 #: src/enigma_mainmenu.cpp:27
2641 msgid "close the mainmenu"
2644 #: src/enigma_mainmenu.cpp:28
2645 msgid "select previous entry"
2648 #: src/enigma_mainmenu.cpp:29
2649 msgid "select next entry"
2652 #: src/enigma_mainmenu.cpp:57 src/enigma_mainmenu.cpp:186
2656 #: src/enigma_mainmenu.cpp:61 src/enigma_mainmenu.cpp:188
2660 #: src/enigma_mainmenu.cpp:64 src/enigma_mainmenu.cpp:83
2661 #: src/enigma_mainmenu.cpp:195 src/enigma_mainmenu.cpp:205
2662 #: src/rotorconfig.cpp:917 src/timer.cpp:2736
2666 #: src/enigma_mainmenu.cpp:67 src/enigma_mainmenu.cpp:197 src/timer.cpp:2188
2670 #: src/enigma_mainmenu.cpp:70 src/enigma_mainmenu.cpp:86
2671 #: src/enigma_mainmenu.cpp:193 src/enigma_mainmenu.cpp:203
2672 #: src/enigma_setup.cpp:36
2676 #: src/enigma_mainmenu.cpp:73 src/enigma_mainmenu.cpp:194
2677 #: src/enigma_plugins.cpp:126
2681 #: src/enigma_mainmenu.cpp:76 src/enigma_mainmenu.cpp:89
2682 #: src/enigma_mainmenu.cpp:192 src/enigma_mainmenu.cpp:202
2686 #: src/enigma_mainmenu.cpp:79 src/enigma_mainmenu.cpp:92
2687 #: src/enigma_mainmenu.cpp:190 src/enigma_mainmenu.cpp:200
2691 #: src/enigma_mainmenu.cpp:98 src/enigma_mainmenu.cpp:106
2692 #: src/enigma_mainmenu.cpp:339
2696 #: src/enigma_mainmenu.cpp:275 src/parentallock.cpp:143
2697 #: src/parentallock.cpp:155
2701 #: src/enigma_plugins.cpp:126
2705 #: src/enigma_plugins.cpp:132
2706 msgid "select plugin and press ok"
2709 #: src/enigma_plugins.cpp:156
2711 msgid "Couldn't read plugin directory %s"
2714 #: src/enigma_plugins.cpp:160 src/enigma_plugins.cpp:269 src/scan.cpp:1873
2715 #: src/scan.cpp:1928 src/scan.cpp:2035
2719 #: src/enigma_plugins.cpp:239
2720 msgid "E: currently another plugin is running..."
2723 #: src/enigma_plugins.cpp:246
2725 msgid "plugin '%s' not found"
2728 #: src/enigma_plugins.cpp:249
2729 msgid "E: no name given"
2732 #: src/enigma_plugins.cpp:269
2734 msgid "Cannot execute %s (check rights)"
2737 #: src/enigma_plugins.cpp:537
2739 msgid "Output from %s"
2742 #: src/enigma_plugins.cpp:562
2744 msgid "Executing %s. Please wait..."
2747 #: src/enigma_plugins.cpp:565
2749 msgid "Could not execute %s"
2752 #: src/enigma_scan.cpp:40 src/enigma_setup.cpp:42
2753 msgid "Service Searching"
2756 #: src/enigma_scan.cpp:48
2757 msgid "open satellite config"
2760 #: src/enigma_scan.cpp:49
2761 msgid "open the satfinder"
2764 #: src/enigma_scan.cpp:50
2768 #: src/enigma_scan.cpp:50
2769 msgid "open Motor Setup"
2772 #: src/enigma_scan.cpp:51 src/tpeditwindow.cpp:139
2773 msgid "Transponder Edit"
2776 #: src/enigma_scan.cpp:51
2777 msgid "for automatic scan"
2780 #: src/enigma_scan.cpp:55 src/satfind.cpp:67
2784 #: src/enigma_scan.cpp:55
2785 msgid "open the signalfinder"
2788 #: src/enigma_scan.cpp:56 src/scan.cpp:39
2792 #: src/enigma_scan.cpp:56 src/scan.cpp:39
2793 msgid "disable 5V for passive terrerstrial antennas"
2796 #: src/enigma_scan.cpp:61 src/scan.cpp:43
2797 msgid "Automatic Transponder Scan"
2800 #: src/enigma_scan.cpp:61 src/scan.cpp:43
2801 msgid "open automatic transponder scan"
2804 #: src/enigma_scan.cpp:63 src/scan.cpp:45
2805 msgid "Automatic Multisat Scan"
2808 #: src/enigma_scan.cpp:63 src/scan.cpp:45
2809 msgid "open automatic multisat transponder scan"
2812 #: src/enigma_scan.cpp:65
2813 msgid "Manual Transponder Scan"
2816 #: src/enigma_scan.cpp:65 src/scan.cpp:46
2817 msgid "open manual transponder scan"
2820 #: src/enigma_scan.cpp:142
2822 "DiSEqC 1.2 is enabled on more than one LNB, please select the LNB the motor "
2826 #: src/enigma_scan.cpp:142 src/setupnetwork.cpp:938
2830 #: src/enigma_scan.cpp:156
2832 "Found no LNB with DiSEqC 1.2 enabled,\n"
2833 "please goto Satellite Config first, and enable DiSEqC 1.2"
2836 #: src/enigma_scan.cpp:156 src/rotorconfig.cpp:692 src/rotorconfig.cpp:893
2840 #: src/enigma_scan.cpp:198
2844 #: src/enigma_scan.cpp:205
2846 msgid "use LNB %d for Motor"
2849 #: src/enigma_setup.cpp:40
2850 msgid "open service organising"
2853 #: src/enigma_setup.cpp:42
2854 msgid "open service searching"
2857 #: src/enigma_setup.cpp:44 src/system_settings.cpp:37
2858 msgid "System Settings"
2861 #: src/enigma_setup.cpp:44
2862 msgid "open system settings"
2865 #: src/enigma_setup.cpp:47
2866 msgid "Common Interface"
2869 #: src/enigma_setup.cpp:47
2870 msgid "open common interface menu"
2873 #: src/enigma_setup.cpp:49
2874 msgid "Parental Lock"
2877 #: src/enigma_setup.cpp:49
2878 msgid "open parental setup"
2881 #: src/enigma_setup.cpp:51 src/setup_extra.cpp:40
2882 msgid "Expert Setup"
2885 #: src/enigma_setup.cpp:51
2886 msgid "open expert setup"
2889 #: src/epgactions.h:14
2890 msgid "EPG selector"
2893 #: src/epgactions.h:15
2894 msgid "add this event as DVR Event to timer list"
2897 #: src/epgactions.h:16
2898 msgid "add this event as NGRAB Event to timer list"
2901 #: src/epgactions.h:17
2902 msgid "add this event as simple Switch Event to timer list"
2905 #: src/epgactions.h:18
2906 msgid "remove this event from timer list"
2909 #: src/epgactions.h:19
2910 msgid "show extended event information"
2913 #: src/epgwindow.cpp:113 src/timer.cpp:224
2917 #: src/epgwindow.cpp:113 src/timer.cpp:224
2921 #: src/epgwindow.cpp:113 src/timer.cpp:224
2925 #: src/epgwindow.cpp:113 src/timer.cpp:224
2929 #: src/epgwindow.cpp:175
2933 #: src/helpwindow.cpp:20
2937 #: src/helpwindow.cpp:21
2938 msgid "close the help window"
2941 #: src/helpwindow.cpp:22
2945 #: src/helpwindow.cpp:23
2949 #: src/parentallock.cpp:25
2950 msgid "please enter pin:"
2953 #: src/parentallock.cpp:45
2954 msgid "Parental setup"
2957 #: src/parentallock.cpp:52
2958 msgid "Parental lock"
2961 #: src/parentallock.cpp:55
2962 msgid "enable/disable parental lock"
2965 #: src/parentallock.cpp:59 src/parentallock.cpp:76
2969 #: src/parentallock.cpp:62
2970 msgid "change Parental PIN (ok)"
2973 #: src/parentallock.cpp:69
2977 #: src/parentallock.cpp:72
2978 msgid "enable/disable setup lock"
2981 #: src/parentallock.cpp:79
2982 msgid "change Setup PIN (ok)"
2985 #: src/parentallock.cpp:86
2986 msgid "Hide locked services"
2989 #: src/parentallock.cpp:89
2990 msgid "don't show locked services in any list"
2993 #: src/parentallock.cpp:171
2998 #: src/parentallock.cpp:178
3000 msgid "Reenter %s PIN"
3003 #: src/parentallock.cpp:186
3005 "The PINs are not equal!\n"
3007 "Do you want to retry?"
3010 #: src/parentallock.cpp:187 src/parentallock.cpp:268
3011 msgid "PIN validation failed"
3014 #: src/parentallock.cpp:204
3015 msgid "PIN change completed"
3018 #: src/parentallock.cpp:205
3022 #: src/parentallock.cpp:256
3024 msgid "current %s PIN"
3027 #: src/parentallock.cpp:267
3029 "The entered PIN is incorrect.\n"
3030 "Do you want to retry?"
3033 #: src/rotorconfig.cpp:54 src/rotorconfig.cpp:98 src/tpeditwindow.cpp:83
3037 #: src/rotorconfig.cpp:55 src/rotorconfig.cpp:99 src/tpeditwindow.cpp:84
3041 #: src/rotorconfig.cpp:69
3045 #: src/rotorconfig.cpp:70
3049 #: src/rotorconfig.cpp:119 src/tpeditwindow.cpp:73
3050 msgid "enter orbital position without dot (19.2° = 192)"
3053 #: src/rotorconfig.cpp:287 src/rotorconfig.cpp:344
3057 #: src/rotorconfig.cpp:381 src/rotorconfig.cpp:384
3058 msgid "drive Motor East"
3061 #: src/rotorconfig.cpp:382
3062 msgid "drive Motor East.. one step"
3065 #: src/rotorconfig.cpp:383
3066 msgid "stop Motor drive East"
3069 #: src/rotorconfig.cpp:385
3070 msgid "drive Motor West.. one step"
3073 #: src/rotorconfig.cpp:386
3074 msgid "stop Motor drive West"
3077 #: src/rotorconfig.cpp:462
3081 #: src/rotorconfig.cpp:462
3082 msgid "store new sat positions"
3085 #: src/rotorconfig.cpp:463
3086 msgid "drive to stored pos"
3089 #: src/rotorconfig.cpp:463
3090 msgid "drive to stored position"
3093 #: src/rotorconfig.cpp:464
3094 msgid "drive to satellite"
3097 #: src/rotorconfig.cpp:464
3098 msgid "drive to stored satellite"
3101 #: src/rotorconfig.cpp:465
3102 msgid "drive to 0°"
3105 #: src/rotorconfig.cpp:465
3109 #: src/rotorconfig.cpp:466
3113 #: src/rotorconfig.cpp:466
3114 msgid "recalculate stored positions rel. to current pos"
3117 #: src/rotorconfig.cpp:467
3118 msgid "set east limit"
3121 #: src/rotorconfig.cpp:467
3122 msgid "set east soft limit"
3125 #: src/rotorconfig.cpp:468
3126 msgid "set west limit"
3129 #: src/rotorconfig.cpp:468
3130 msgid "set west soft limit"
3133 #: src/rotorconfig.cpp:469
3134 msgid "disable limits"
3137 #: src/rotorconfig.cpp:469 src/rotorconfig.cpp:531
3138 msgid "disable soft limits"
3141 #: src/rotorconfig.cpp:470
3142 msgid "enable limits"
3145 #: src/rotorconfig.cpp:470 src/rotorconfig.cpp:535
3146 msgid "enable soft limits"
3149 #: src/rotorconfig.cpp:507
3150 msgid "store current pos in motor"
3153 #: src/rotorconfig.cpp:508 src/rotorconfig.cpp:524 src/rotorconfig.cpp:528
3154 #: src/rotorconfig.cpp:853
3158 #: src/rotorconfig.cpp:511
3159 msgid "drive motor to stored pos"
3162 #: src/rotorconfig.cpp:512 src/rotorconfig.cpp:516 src/rotorconfig.cpp:540
3166 #: src/rotorconfig.cpp:515
3167 msgid "drive motor to reference position"
3170 #: src/rotorconfig.cpp:519
3171 msgid "recalculate all stored positions"
3174 #: src/rotorconfig.cpp:520
3178 #: src/rotorconfig.cpp:523
3179 msgid "store current pos as east soft limit"
3182 #: src/rotorconfig.cpp:527
3183 msgid "store current pos as west soft limit"
3186 #: src/rotorconfig.cpp:532 src/rotorconfig.cpp:536
3190 #: src/rotorconfig.cpp:539
3191 msgid "drive motor to satellite"
3194 #: src/rotorconfig.cpp:691
3196 "Wrong use of this function can corrupt all stored sat positions.\n"
3197 "Are you sure you want to use this function?"
3200 #: src/rotorconfig.cpp:757
3201 msgid "one step East..."
3204 #: src/rotorconfig.cpp:766
3205 msgid "one step west..."
3208 #: src/rotorconfig.cpp:780
3209 msgid "turning to east..."
3212 #: src/rotorconfig.cpp:791
3213 msgid "turning to west..."
3216 #: src/rotorconfig.cpp:804
3220 #: src/rotorconfig.cpp:841
3221 msgid "Storage Location:"
3224 #: src/rotorconfig.cpp:843
3225 msgid "change storage Location or store"
3228 #: src/rotorconfig.cpp:893
3231 "%d.%d°%c is currently stored at location %d!\n"
3232 "When you store this now at Location %d, we must remove the old Location.\n"
3233 "Are you sure you want to do this?"
3236 #: src/rotorconfig.cpp:915
3239 "Store %d.%d°%c at location %d.\n"
3240 "If you want another location, then say no and change the location manually.\n"
3241 "Are you sure you want to store at this location?"
3244 #: src/satconfig.cpp:64
3245 msgid "one single satellite"
3248 #: src/satconfig.cpp:64
3249 msgid "one directly connected LNB"
3252 #: src/satconfig.cpp:65
3253 msgid "2 satellites via Toneburst"
3256 #: src/satconfig.cpp:65
3257 msgid "2 LNBs via Toneburst Signal"
3260 #: src/satconfig.cpp:66
3261 msgid "2 satellites via 22Khz (only Highband)"
3264 #: src/satconfig.cpp:66
3265 msgid "2 LNBs via 22Khz Signal.. special for old analog switches"
3268 #: src/satconfig.cpp:67
3269 msgid "2 satellites via DiSEqC A/B"
3272 #: src/satconfig.cpp:67
3273 msgid "2 LNBs via DiSEqC"
3276 #: src/satconfig.cpp:68
3277 msgid "4 satellites via DiSEqC OPT A/B"
3280 #: src/satconfig.cpp:68
3281 msgid "4 LNBs via DiSEqC"
3284 #: src/satconfig.cpp:69
3285 msgid "many satellites via DiSEqC Rotor"
3288 #: src/satconfig.cpp:69
3289 msgid "1 LNB with DiSEqC Rotor"
3292 #: src/satconfig.cpp:70
3293 msgid "non-standard user defined configuration..."
3296 #: src/satconfig.cpp:70
3300 #: src/satconfig.cpp:135
3302 "Configuration contains some elements\n"
3303 "which don't fit into new DiSEqC-Type. Drop these items?"
3306 #: src/satconfig.cpp:135
3307 msgid "Change DiSEqC-Type..."
3310 #: src/satconfig.cpp:333
3311 msgid "direct connection"
3314 #: src/satconfig.cpp:741
3315 msgid "press ok to select another satellite"
3318 #: src/satconfig.cpp:756
3319 msgid "press ok to goto LNB config"
3322 #: src/satconfig.cpp:774
3323 msgid "press ok to select another 22kHz mode"
3326 #: src/satconfig.cpp:775
3327 msgid "22kHz signal is automatically switched"
3330 #: src/satconfig.cpp:776
3331 msgid "22kHz is always enabled (high band)"
3334 #: src/satconfig.cpp:777
3335 msgid "22kHz is always disabled (low band)"
3338 #: src/satconfig.cpp:787
3339 msgid "press ok to select another LNB Voltage mode"
3342 #: src/satconfig.cpp:788
3343 msgid "Voltage is automatically changed"
3346 #: src/satconfig.cpp:789
3347 msgid "Voltage is always 14V (vertical)"
3350 #: src/satconfig.cpp:790
3351 msgid "Voltage is always 18V (horizontal)"
3354 #: src/satconfig.cpp:791
3355 msgid "Voltage is always off"
3358 #: src/satconfig.cpp:1150 src/satconfig.cpp:1196 src/satconfig.cpp:1206
3362 #: src/satconfig.cpp:1150
3363 msgid "sends no tone burst"
3366 #: src/satconfig.cpp:1151
3367 msgid "sends modulated tone burst"
3370 #: src/satconfig.cpp:1152
3371 msgid "sends unmodulated tone burst"
3374 #: src/satconfig.cpp:1159
3375 msgid "Disable DiSEqC"
3378 #: src/satconfig.cpp:1160
3379 msgid "Use DiSEqC Version 1.0"
3382 #: src/satconfig.cpp:1161
3383 msgid "Use DiSEqC Version 1.1"
3386 #: src/satconfig.cpp:1162
3387 msgid "Use DiSEqC Version 1.2"
3390 #: src/satconfig.cpp:1170
3391 msgid "sends DiSEqC cmd A/A"
3394 #: src/satconfig.cpp:1171
3395 msgid "sends DiSEqC cmd A/B"
3398 #: src/satconfig.cpp:1172
3399 msgid "sends DiSEqC cmd B/A"
3402 #: src/satconfig.cpp:1173
3403 msgid "sends DiSEqC cmd B/B"
3406 #: src/satconfig.cpp:1174
3407 msgid "sends no committed DiSEqC cmd"
3410 #: src/satconfig.cpp:1175
3411 msgid "sends switch cmd 1"
3414 #: src/satconfig.cpp:1176
3415 msgid "sends switch cmd 2"
3418 #: src/satconfig.cpp:1177
3419 msgid "sends switch cmd 3"
3422 #: src/satconfig.cpp:1178
3423 msgid "sends switch cmd 4"
3426 #: src/satconfig.cpp:1179
3427 msgid "sends switch cmd 5"
3430 #: src/satconfig.cpp:1180
3431 msgid "sends switch cmd 6"
3434 #: src/satconfig.cpp:1181
3435 msgid "sends switch cmd 7"
3438 #: src/satconfig.cpp:1182
3439 msgid "sends switch cmd 8"
3442 #: src/satconfig.cpp:1183
3443 msgid "sends switch cmd 9"
3446 #: src/satconfig.cpp:1184
3447 msgid "sends switch cmd 10"
3450 #: src/satconfig.cpp:1185
3451 msgid "sends switch cmd 11"
3454 #: src/satconfig.cpp:1186
3455 msgid "sends switch cmd 12"
3458 #: src/satconfig.cpp:1187
3459 msgid "sends switch cmd 13"
3462 #: src/satconfig.cpp:1188
3463 msgid "sends switch cmd 14"
3466 #: src/satconfig.cpp:1189
3467 msgid "sends switch cmd 15"
3470 #: src/satconfig.cpp:1190
3471 msgid "sends switch cmd 16"
3474 #: src/satconfig.cpp:1196
3475 msgid "sends no DiSEqC repeats"
3478 #: src/satconfig.cpp:1197
3482 #: src/satconfig.cpp:1197
3483 msgid "sends one repeat"
3486 #: src/satconfig.cpp:1198
3490 #: src/satconfig.cpp:1198
3491 msgid "sends two repeats"
3494 #: src/satconfig.cpp:1199
3498 #: src/satconfig.cpp:1199
3499 msgid "sends three repeats"
3502 #: src/satconfig.cpp:1206
3503 msgid "sends no uncommitted switch command"
3506 #: src/satconfig.cpp:1207
3510 #: src/satconfig.cpp:1207
3511 msgid "select uncommitted switch Input 1"
3514 #: src/satconfig.cpp:1208
3518 #: src/satconfig.cpp:1208
3519 msgid "select uncommitted switch Input 2"
3522 #: src/satconfig.cpp:1209
3526 #: src/satconfig.cpp:1209
3527 msgid "select uncommitted switch Input 3"
3530 #: src/satconfig.cpp:1210
3534 #: src/satconfig.cpp:1210
3535 msgid "select uncommitted switch Input 4"
3538 #: src/satconfig.cpp:1211
3542 #: src/satconfig.cpp:1211
3543 msgid "select uncommitted switch Input 5"
3546 #: src/satconfig.cpp:1212
3550 #: src/satconfig.cpp:1212
3551 msgid "select uncommitted switch Input 6"
3554 #: src/satconfig.cpp:1213
3558 #: src/satconfig.cpp:1213
3559 msgid "select uncommitted switch Input 7"
3562 #: src/satconfig.cpp:1214
3566 #: src/satconfig.cpp:1214
3567 msgid "select uncommitted switch Input 8"
3570 #: src/satconfig.cpp:1215
3574 #: src/satconfig.cpp:1215
3575 msgid "select uncommitted switch Input 9"
3578 #: src/satconfig.cpp:1216
3582 #: src/satconfig.cpp:1216
3583 msgid "select uncommitted switch Input 10"
3586 #: src/satconfig.cpp:1217
3590 #: src/satconfig.cpp:1217
3591 msgid "select uncommitted switch Input 11"
3594 #: src/satconfig.cpp:1218
3598 #: src/satconfig.cpp:1218
3599 msgid "select uncommitted switch Input 12"
3602 #: src/satconfig.cpp:1219
3606 #: src/satconfig.cpp:1219
3607 msgid "select uncommitted switch Input 13"
3610 #: src/satconfig.cpp:1220
3614 #: src/satconfig.cpp:1220
3615 msgid "select uncommitted switch Input 14"
3618 #: src/satconfig.cpp:1221
3622 #: src/satconfig.cpp:1221
3623 msgid "select uncommitted switch Input 15"
3626 #: src/satconfig.cpp:1222
3630 #: src/satconfig.cpp:1222
3631 msgid "select uncommitted switch Input 16"
3634 #: src/satfind.cpp:68
3639 msgid "manual scan.."
3643 msgid "Waiting for tuner lock on:"
3648 "To begin searching for a valid satellite press OK, or choose your desired "
3649 "satellite manually and press OK"
3654 "To begin searching for a valid cable provider press OK, or choose your "
3655 "desired cable provider manually and press OK"
3660 "To begin searching for a valid transponder press OK, or choose your desired "
3661 "location manually and press OK"
3666 "A valid transponder has been found. Verify that the right network is selected"
3671 "All known transponders have been tried, but no lock was possible. Verify "
3672 "antenna-/cable-setup or try manual search if its some obscure satellite/"
3678 "All known transponders have been tried, but no lock was possible. Verify "
3679 "antenna-/cable-setup or try another satellite/network."
3683 msgid "Search in progress "
3688 msgid "%02i minutes and %02i seconds left"
3693 msgid "%02i seconds left"
3713 msgid "Transponder Scan"
3716 #: src/scan.cpp:1246
3717 msgid "Waiting for tuner lock... please wait"
3720 #: src/scan.cpp:1299 src/scan.cpp:1367
3721 msgid "Scan is in progress... please wait"
3724 #: src/scan.cpp:1330 src/scan.cpp:1383
3727 "The transponder scan has finished and found \n"
3728 " %i new Transponders,\n"
3729 " %i new TV Services,\n"
3730 " %i new Radio Services and\n"
3731 " %i new Data Services.\n"
3732 "%i Transponders with %i Services scanned."
3735 #: src/scan.cpp:1395
3739 #: src/scan.cpp:1403
3740 msgid "Scan is in finished, press ok to close window"
3743 #: src/scan.cpp:1411
3751 #: src/scan.cpp:1411
3756 #: src/scan.cpp:1411
3761 #: src/scan.cpp:1412
3762 msgid "Scan finished"
3765 #: src/scan.cpp:1518
3769 #: src/scan.cpp:1540
3770 msgid "to enter service name press OK"
3773 #: src/scan.cpp:1541
3774 msgid "enter service name"
3777 #: src/scan.cpp:1556
3778 msgid "to enter provider name press OK"
3781 #: src/scan.cpp:1557
3782 msgid "enter provider name"
3785 #: src/scan.cpp:1572
3786 msgid "to enter video pid press OK"
3789 #: src/scan.cpp:1573
3790 msgid "enter video pid"
3793 #: src/scan.cpp:1586
3794 msgid "to enter pcr pid press OK"
3797 #: src/scan.cpp:1587
3798 msgid "enter pcr pid (in most case the same pid as the video pid)"
3801 #: src/scan.cpp:1602
3802 msgid "to enter audio pid press OK"
3805 #: src/scan.cpp:1603
3806 msgid "enter audio pid"
3809 #: src/scan.cpp:1609
3813 #: src/scan.cpp:1610
3814 msgid "set this check when the entered audio pid is a ac3 audio pid"
3817 #: src/scan.cpp:1625
3818 msgid "to enter (video) text pid press OK"
3821 #: src/scan.cpp:1626
3822 msgid "enter (video) text pid"
3825 #: src/scan.cpp:1639
3826 msgid "to enter service id press OK"
3829 #: src/scan.cpp:1640
3830 msgid "enter service id"
3833 #: src/scan.cpp:1655
3834 msgid "to enter tsid (transport stream id) press OK"
3837 #: src/scan.cpp:1656
3838 msgid "enter tsid (transport stream id)"
3841 #: src/scan.cpp:1669
3842 msgid "to enter onid (original network id) press OK"
3845 #: src/scan.cpp:1670
3846 msgid "enter onid (original network id)"
3849 #: src/scan.cpp:1678
3853 #: src/scan.cpp:1679
3854 msgid "don't read PAT/PMT/SDT for this service (only use cached pids)"
3857 #: src/scan.cpp:1685
3861 #: src/scan.cpp:1686
3863 "update name/provider/service type with content of the sdt (and auto remove "
3867 #: src/scan.cpp:1692
3871 #: src/scan.cpp:1693
3872 msgid "don't update the service name with content of the sdt"
3875 #: src/scan.cpp:1706
3879 #: src/scan.cpp:1707
3880 msgid "read tsid and onid from the nit (this can take up to 10 seconds)"
3883 #: src/scan.cpp:1716
3887 #: src/scan.cpp:1717
3888 msgid "test entered values"
3891 #: src/scan.cpp:1727
3893 "save data and close window (the new channel could be found in the all "
3897 #: src/scan.cpp:1872
3899 "Reading NIT failed... this transponder have no NIT..\n"
3900 "so you can use random values for tsid and onid or set both to 0"
3903 #: src/scan.cpp:1927
3905 "No NIT Entry for current transponder values found...\n"
3906 "so you can use random values for tsid and onid or set both to 0"
3909 #: src/scan.cpp:2034
3911 "A transponder with the same tsid / onid but other frequency/pol/... already "
3912 "exist.. create a new transponder with the same data is no possible.. please "
3913 "do change tsid and/or onid"
3916 #: src/scan.cpp:2090
3919 "A service named '%s' with this sid/onid/tsid/namespace is already exist\n"
3920 "in provider '%s'.\n"
3921 "Should i use this service name and provider name?"
3924 #: src/scan.cpp:2092
3925 msgid "Service already exist"
3928 #: src/scan.cpp:2180
3929 msgid "show/enter values as hexadecimal"
3932 #: src/scan.cpp:2186
3933 msgid "show/enter values as decimal"
3936 #: src/setup_extra.cpp:61
3937 msgid "Communication Setup"
3940 #: src/setup_extra.cpp:61
3941 msgid "open communication setup"
3944 #: src/setup_extra.cpp:62
3945 msgid "Ngrab Streaming Setup"
3948 #: src/setup_extra.cpp:62
3949 msgid "open ngrab server setup"
3952 #: src/setup_extra.cpp:64 src/software_update.cpp:29
3953 msgid "Software Update"
3956 #: src/setup_extra.cpp:64
3957 msgid "open software update"
3960 #: src/setup_extra.cpp:70
3961 msgid "Remote Control"
3964 #: src/setup_extra.cpp:70
3965 msgid "open remote control setup"
3968 #: src/setup_extra.cpp:72 src/setup_extra.cpp:352
3969 msgid "Factory reset"
3972 #: src/setup_extra.cpp:72
3973 msgid "all settings will set to factory defaults"
3976 #: src/setup_extra.cpp:78
3977 msgid "record split size (left, right)"
3980 #: src/setup_extra.cpp:95
3981 msgid "infobar timeout (left, right)"
3984 #: src/setup_extra.cpp:96 src/setup_extra.cpp:97 src/setup_extra.cpp:98
3985 #: src/setup_extra.cpp:99 src/setup_extra.cpp:100 src/setup_extra.cpp:101
3986 #: src/setup_extra.cpp:102 src/setup_extra.cpp:103 src/setup_extra.cpp:104
3987 #: src/setup_extra.cpp:105 src/setup_extra.cpp:106
3989 msgid "Infobar timeout %d sec"
3992 #: src/setup_extra.cpp:112
3993 msgid "Serviceselector help buttons"
3996 #: src/setup_extra.cpp:112
3997 msgid "show colored help buttons in service selector"
4000 #: src/setup_extra.cpp:114
4001 msgid "Show Sat position"
4004 #: src/setup_extra.cpp:114
4005 msgid "show sat position in the infobar"
4008 #: src/setup_extra.cpp:116
4009 msgid "Enable fast zapping"
4012 #: src/setup_extra.cpp:116
4013 msgid "enables faster zapping.. but with visible sync"
4016 #: src/setup_extra.cpp:117
4017 msgid "Skip confirmations"
4020 #: src/setup_extra.cpp:117
4021 msgid "enable/disable confirmations"
4024 #: src/setup_extra.cpp:118
4025 msgid "Hide error windows"
4028 #: src/setup_extra.cpp:118
4029 msgid "don't show zap error messages"
4032 #: src/setup_extra.cpp:119
4033 msgid "Auto show Infobar"
4036 #: src/setup_extra.cpp:119
4037 msgid "always show infobar when new event info is avail"
4040 #: src/setup_extra.cpp:120
4041 msgid "Show remaining Time"
4044 #: src/setup_extra.cpp:120
4045 msgid "show event remaining time in the infobar"
4048 #: src/setup_extra.cpp:121
4049 msgid "Use http authentification"
4052 #: src/setup_extra.cpp:121
4053 msgid "enables the http (user/password) authentification"
4056 #: src/setup_extra.cpp:122
4057 msgid "Don't open serial port"
4060 #: src/setup_extra.cpp:122
4061 msgid "don't write debug messages to /dev/tts/0"
4064 #: src/setup_extra.cpp:123
4065 msgid "Auto bouquet change"
4068 #: src/setup_extra.cpp:123
4069 msgid "change into next bouquet when end of current bouquet is reached"
4072 #: src/setup_extra.cpp:124
4073 msgid "Auto reconnect cahandler"
4076 #: src/setup_extra.cpp:124
4077 msgid "try to reconnect when an external cahandler connection was lost"
4080 #: src/setup_extra.cpp:128
4081 msgid "Enable file sharing"
4084 #: src/setup_extra.cpp:128
4085 msgid "start file sharing(samba) on startup"
4088 #: src/setup_extra.cpp:131
4089 msgid "Disable teletext caching"
4092 #: src/setup_extra.cpp:131
4093 msgid "don't cache teletext pages in background"
4096 #: src/setup_extra.cpp:133
4097 msgid "Enable Zapping History"
4100 #: src/setup_extra.cpp:133
4101 msgid "don't care about actual mode when zapping in history list"
4104 #: src/setup_extra.cpp:135
4105 msgid "Disable Standby"
4108 #: src/setup_extra.cpp:135
4109 msgid "Box goes directly into Deep-Standby"
4112 #: src/setup_extra.cpp:140
4113 msgid "Enable MHW EPG"
4116 #: src/setup_extra.cpp:140
4118 "Mediahighway EPG, activate swap space when using with multiple operators"
4121 #: src/setup_extra.cpp:150
4122 msgid "Disable CoreFiles"
4125 #: src/setup_extra.cpp:150
4126 msgid "don't create 'Corefiles' after an Enigma crash"
4129 #: src/setup_extra.cpp:156
4130 msgid "Disable HDD mount"
4133 #: src/setup_extra.cpp:156
4134 msgid "don't mount the HDD via 'rcS'"
4137 #: src/setup_extra.cpp:164
4138 msgid "Enable Filemode Autoplay"
4141 #: src/setup_extra.cpp:164
4142 msgid "continue playing last selected movie when entering Filemode"
4145 #: src/setup_extra.cpp:173
4146 msgid "Show Boot-Info"
4149 #: src/setup_extra.cpp:173
4150 msgid "Show Boot-Infos (IP, etc.)"
4153 #: src/setup_extra.cpp:179
4154 msgid "Disable HW_Sections"
4157 #: src/setup_extra.cpp:179
4158 msgid "don't use hardware section filtering"
4161 #: src/setup_extra.cpp:185
4162 msgid "Disable Watchdog"
4165 #: src/setup_extra.cpp:185
4166 msgid "don't use the Watchdog"
4169 #: src/setup_extra.cpp:193
4170 msgid "Disable ENX-Watchdog"
4173 #: src/setup_extra.cpp:193
4174 msgid "don't use the ENX-Watchdog"
4177 #: src/setup_extra.cpp:200
4178 msgid "Enable SPTS-Mode"
4181 #: src/setup_extra.cpp:200
4182 msgid "use SPTS-Mode (enables TS-recording)"
4185 #: src/setup_extra.cpp:206
4186 msgid "Disable O_SYNC"
4189 #: src/setup_extra.cpp:206
4190 msgid "The file/recording is not opened for synchronous I/O"
4193 #: src/setup_extra.cpp:214
4194 msgid "New Philips driver"
4197 #: src/setup_extra.cpp:214
4198 msgid "use tda80xx driver for Philips boxes"
4201 #: src/setup_extra.cpp:348
4203 "When you do a factory reset, you will lose ALL your configuration data\n"
4204 "(including bouquets, services, satellite data ...)\n"
4205 "After completion of factory reset, your receiver will restart "
4208 "Really do a factory reset?"
4211 #: src/setup_extra.cpp:370
4212 msgid "Factory reset..."
4215 #: src/setup_harddisk.cpp:186
4216 msgid "Harddisk Setup"
4219 #: src/setup_harddisk.cpp:303
4220 msgid "Are you SURE that you want to format this disk?\n"
4223 #: src/setup_harddisk.cpp:304 src/setup_harddisk.cpp:317
4224 #: src/setup_harddisk.cpp:347 src/setup_harddisk.cpp:357
4225 #: src/setup_harddisk.cpp:429 src/setup_harddisk.cpp:441
4226 msgid "formatting harddisk..."
4229 #: src/setup_harddisk.cpp:315
4231 "There's data on this harddisk.\n"
4232 "You will lose that data. Proceed?"
4235 #: src/setup_harddisk.cpp:346
4237 "please wait while initializing harddisk.\n"
4238 "This might take some minutes.\n"
4241 #: src/setup_harddisk.cpp:356
4242 msgid "sorry, couldn't find sfdisk utility to partition harddisk."
4245 #: src/setup_harddisk.cpp:428
4246 msgid "creating filesystem failed."
4249 #: src/setup_harddisk.cpp:440
4250 msgid "successfully formatted your disk!"
4253 #: src/setup_harddisk.cpp:471
4254 msgid "(error reading information)"
4257 #: src/setup_harddisk.cpp:473
4258 msgid "uninitialized - format it to use!"
4261 #: src/setup_harddisk.cpp:475
4263 msgid "in use, %d.%03d GB (~%d minutes) free"
4266 #: src/setup_harddisk.cpp:477
4267 msgid "initialized, but unknown filesystem"
4270 #: src/setup_harddisk.cpp:559
4271 msgid "could not unmount the filesystem... "
4274 #: src/setup_harddisk.cpp:560 src/setup_harddisk.cpp:573
4275 #: src/setup_harddisk.cpp:596 src/setup_harddisk.cpp:619
4276 #: src/setup_harddisk.cpp:638
4277 msgid "check filesystem..."
4280 #: src/setup_harddisk.cpp:572
4281 msgid "sorry, couldn't find fsck.ext3 utility to check the ext3 filesystem."
4284 #: src/setup_harddisk.cpp:595
4285 msgid "sorry, couldn't find fsck.ext2 utility to check the ext2 filesystem."
4288 #: src/setup_harddisk.cpp:618
4290 "sorry, couldn't find reiserfsck utility to check the reiserfs filesystem."
4293 #: src/setup_harddisk.cpp:637
4294 msgid "not supported filesystem for check."
4297 #: src/setup_lcd.cpp:55
4298 msgid "LC-Display Setup"
4301 #: src/setup_lcd.cpp:69 src/setup_osd.cpp:210
4305 #: src/setup_lcd.cpp:74 src/setup_osd.cpp:223
4309 #: src/setup_lcd.cpp:79
4313 #: src/setup_lcd.cpp:87
4314 msgid "set LCD brightness ( left / right )"
4317 #: src/setup_lcd.cpp:94
4318 msgid "set LCD contrast ( left / right )"
4321 #: src/setup_lcd.cpp:101
4322 msgid "set LCD brightness for Standby Mode ( left / right )"
4325 #: src/setup_lcd.cpp:107
4329 #: src/setup_lcd.cpp:109
4330 msgid "enable/disable inverted LCD (ok)"
4333 #: src/setup_keyboard.cpp:32 src/system_settings.cpp:56
4334 msgid "Keyboard Setup"
4337 #: src/setup_keyboard.cpp:39
4338 msgid "Keyboard Mapping:"
4341 #: src/setup_keyboard.cpp:46
4342 msgid "select your keyboard mapping (ok)"
4345 #: src/setup_osd.cpp:41
4346 msgid "PluginOffsetActions"
4349 #: src/setup_osd.cpp:42
4350 msgid "enable set the leftTop Point of the rectangle"
4353 #: src/setup_osd.cpp:43
4354 msgid "enable set the rightBottom Point of the rectangle"
4357 #: src/setup_osd.cpp:44
4358 msgid "saves the current positions"
4361 #: src/setup_osd.cpp:167
4363 "here you can center the tuxtxt rectangle...\n"
4364 "press red to select the left top edge\n"
4365 "press green to select the right bottom edge\n"
4366 "use the cursor keys to move the selected edges"
4369 #: src/setup_osd.cpp:188 src/system_settings.cpp:59
4370 msgid "OSD Settings"
4373 #: src/setup_osd.cpp:196
4377 #: src/setup_osd.cpp:204
4378 msgid "change the transparency correction"
4381 #: src/setup_osd.cpp:217
4382 msgid "change the brightness correction"
4385 #: src/setup_osd.cpp:230
4386 msgid "change the contrast"
4389 #: src/setup_osd.cpp:235
4390 msgid "Show Mainmenu like Listbox"
4393 #: src/setup_osd.cpp:236
4394 msgid "show the Mainmenu in normal listbox style"
4397 #: src/setup_osd.cpp:244
4401 #: src/setup_osd.cpp:250
4402 msgid "press ok to open skin selector"
4405 #: src/setup_osd.cpp:254
4406 msgid "TuxText position"
4409 #: src/setup_osd.cpp:255
4410 msgid "here you can center the Tuxtxt (builtin videotext)"
4413 #: src/setup_osd.cpp:337
4415 "You have to restart enigma to apply the new skin\n"
4419 #: src/setup_osd.cpp:337
4420 msgid "Skin changed"
4423 #: src/setup_rc.cpp:45
4424 msgid "Remotecontrol Setup"
4427 #: src/setup_rc.cpp:56
4428 msgid "Repeat Rate:"
4431 #: src/setup_rc.cpp:61
4432 msgid "Repeat Delay:"
4435 #: src/setup_rc.cpp:69
4437 "change remote control repeat rate\n"
4438 "left => less, right => more (... repeats)"
4441 #: src/setup_rc.cpp:76
4443 "change remote control repeat delay\n"
4444 "left => shorter, right => longer (...delay)"
4447 #: src/setup_rc.cpp:86
4448 msgid "select your favourite RC style (ok)"
4451 #: src/setup_rc.cpp:108
4452 msgid "Next Char Timeout:"
4455 #: src/setup_rc.cpp:117
4456 msgid "cursor to next char timeout(msek) in textinputfields"
4459 #: src/setup_rfmod.cpp:27
4460 msgid "UHF-Modulator Setup"
4463 #: src/setup_rfmod.cpp:34
4464 msgid "UHF Modulator on"
4467 #: src/setup_rfmod.cpp:37
4468 msgid "enable UHF Modulator"
4471 #: src/setup_rfmod.cpp:43 src/setup_rfmod.cpp:165
4472 msgid "Test Pattern"
4475 #: src/setup_rfmod.cpp:46
4476 msgid "enable test pattern"
4479 #: src/setup_rfmod.cpp:53
4480 msgid "Sound enable"
4483 #: src/setup_rfmod.cpp:56
4484 msgid "enable Sound"
4487 #: src/setup_rfmod.cpp:63
4488 msgid "Sound Subcarrier:"
4491 #: src/setup_rfmod.cpp:75
4495 #: src/setup_rfmod.cpp:76
4499 #: src/setup_rfmod.cpp:77
4503 #: src/setup_rfmod.cpp:78
4507 #: src/setup_rfmod.cpp:88
4508 msgid "change sound subcarrier frequency"
4511 #: src/setup_rfmod.cpp:92
4512 msgid "Channel Nr.:"
4515 #: src/setup_rfmod.cpp:113
4516 msgid "change channel"
4519 #: src/setup_rfmod.cpp:117
4523 #: src/setup_rfmod.cpp:140
4524 msgid "250Khz steps"
4527 #: src/setup_rfmod.cpp:149
4528 msgid "save settings and leave rf setup"
4531 #: src/setup_rfmod.cpp:165
4532 msgid "if you can read this your rfmod will not work."
4535 #: src/setup_timezone.cpp:22
4536 msgid "Time Zone Setup"
4539 #: src/setup_timezone.cpp:31
4543 #: src/setup_timezone.cpp:36
4544 msgid "select your time zone (ok)"
4547 #: src/setup_timezone.cpp:91
4549 "You have to restart enigma to apply the new Timezone\n"
4553 #: src/setup_timezone.cpp:91
4554 msgid "Timezone changed"
4557 #: src/setupengrab.cpp:25
4558 msgid "Ngrab Server"
4561 #: src/setupengrab.cpp:49
4562 msgid "enter IP Adress of the Ngrab Server (0..9, left, right)"
4565 #: src/setupengrab.cpp:61
4566 msgid "enter ngrab server port (standard is 4000)"
4569 #: src/setupengrab.cpp:72
4570 msgid "enter MAC address of server (for wake on lan)"
4573 #: src/setupengrab.cpp:91
4574 msgid "detect MAC Adress"
4577 #: src/setupengrab.cpp:92
4578 msgid "try to autodetect server MAC address"
4581 #: src/setupengrab.cpp:180
4582 msgid "Please check your NGrab Server or the IP"
4585 #: src/setupengrab.cpp:181
4586 msgid "HW Address(MAC) detection failed"
4589 #: src/setupnetwork.cpp:385
4590 msgid "Communication setup"
4593 #: src/setupnetwork.cpp:456
4594 msgid "enter IP Address of the box (0..9, left, right)"
4597 #: src/setupnetwork.cpp:464
4598 msgid "get Network data from a DHCP Server in the local Network"
4601 #: src/setupnetwork.cpp:477
4602 msgid "enter netmask of your network (0..9, left, right)"
4605 #: src/setupnetwork.cpp:491
4606 msgid "press ok to change connection type"
4609 #: src/setupnetwork.cpp:497 src/setupnetwork.cpp:505
4613 #: src/setupnetwork.cpp:497 src/setupnetwork.cpp:505
4614 msgid "communicate to Local Area Network"
4617 #: src/setupnetwork.cpp:499 src/setupnetwork.cpp:506
4621 #: src/setupnetwork.cpp:499 src/setupnetwork.cpp:506
4622 msgid "communicate to the Internet via DSL"
4625 #: src/setupnetwork.cpp:515
4626 msgid "T-Online User press ok here"
4629 #: src/setupnetwork.cpp:529
4630 msgid "enter your domain name server (0..9, left, right)"
4633 #: src/setupnetwork.cpp:535
4637 #: src/setupnetwork.cpp:547
4638 msgid "press ok to edit your provider login name"
4641 #: src/setupnetwork.cpp:564
4642 msgid "enter your gateways IP Address (0..9, left, right)"
4645 #: src/setupnetwork.cpp:570
4649 #: src/setupnetwork.cpp:579
4650 msgid "press ok to edit your provider password"
4653 #: src/setupnetwork.cpp:585
4654 msgid "Enable Network"
4657 #: src/setupnetwork.cpp:588
4658 msgid "enable/disable network (ok)"
4661 #: src/setupnetwork.cpp:599
4662 msgid "enter port of the Web Interface (0..9, left, right)"
4665 #: src/setupnetwork.cpp:610
4666 msgid "reject incoming connections on port 80"
4669 #: src/setupnetwork.cpp:624
4670 msgid "reject incoming connections on port 23"
4673 #: src/setupnetwork.cpp:631
4674 msgid "reject incoming connections on ports 137,138,139"
4677 #: src/setupnetwork.cpp:638
4678 msgid "reject incoming connections on ports 21"
4681 #: src/setupnetwork.cpp:656
4685 #: src/setupnetwork.cpp:661
4686 msgid "here you can setup nfs/cifs mounts"
4689 #: src/setupnetwork.cpp:991
4690 msgid "enter IP Address (0..9, left, right)"
4693 #: src/setupnetwork.cpp:998
4694 msgid "press ok to change mount type"
4697 #: src/setupnetwork.cpp:1003
4698 msgid "Samba File System(to mount share from another Dreambox)"
4701 #: src/setupnetwork.cpp:1024
4702 msgid "enter name of the local mount point with trailing slash"
4705 #: src/setupnetwork.cpp:1033
4706 msgid "press ok to change mount options"
4709 #: src/setupnetwork.cpp:1059
4710 msgid "press ok to edit extra options"
4713 #: src/setupnetwork.cpp:1069
4714 msgid "press ok to edit username"
4717 #: src/setupnetwork.cpp:1079
4718 msgid "press ok to edit password"
4721 #: src/setupnetwork.cpp:1084
4722 msgid "enable/disable automount (ok)"
4725 #: src/setupnetwork.cpp:1093
4726 msgid "go to previous share"
4729 #: src/setupnetwork.cpp:1101
4730 msgid "press ok to unmount this share"
4733 #: src/setupnetwork.cpp:1111
4734 msgid "press ok to mount this share"
4737 #: src/setupnetwork.cpp:1121
4738 msgid "press ok to save this share"
4741 #: src/setupnetwork.cpp:1132
4742 msgid "go to next share"
4745 #: src/setupnetwork.cpp:1183
4746 msgid "enter the name of the share without trailing slash"
4749 #: src/setupnetwork.cpp:1186
4750 msgid "enter the name of the share (//DreamBOX/harddisk)"
4753 #: src/setupnetwork.cpp:1305 src/setupnetwork.cpp:1346
4754 msgid "invalid or missing dir or local dir"
4757 #: src/setupnetwork.cpp:1323
4758 msgid "NFS/CIFS-Entry stored. Further entry?\n"
4761 #: src/setupnetwork.cpp:1324
4762 msgid "NFS/CIFS-Setup..."
4765 #: src/setupnetwork.cpp:1353
4766 msgid "NFS/CIFS mount error already mounted"
4769 #: src/setupvideo.cpp:57 src/system_settings.cpp:43
4770 msgid "A/V Settings"
4773 #: src/setupvideo.cpp:62
4774 msgid "Color Format:"
4777 #: src/setupvideo.cpp:72
4781 #: src/setupvideo.cpp:73
4785 #: src/setupvideo.cpp:74
4789 #: src/setupvideo.cpp:75
4793 #: src/setupvideo.cpp:82
4794 msgid "choose color format ( left, right )"
4797 #: src/setupvideo.cpp:86
4798 msgid "Aspect Ratio:"
4801 #: src/setupvideo.cpp:96
4802 msgid "choose aspect ratio ( left, right )"
4805 #: src/setupvideo.cpp:97
4806 msgid "4:3 letterbox"
4809 #: src/setupvideo.cpp:98
4813 #: src/setupvideo.cpp:99
4817 #: src/setupvideo.cpp:102
4821 #: src/setupvideo.cpp:107 src/setupvideo.cpp:371
4825 #: src/setupvideo.cpp:130 src/setupvideo.cpp:395
4826 msgid "choose TV system ( left, right )"
4829 #: src/setupvideo.cpp:150
4830 msgid "Disable WSS on 4:3"
4833 #: src/setupvideo.cpp:151
4834 msgid "don't send WSS signal when A-ratio is 4:3"
4837 #: src/setupvideo.cpp:158
4838 msgid "AC3 default output"
4841 #: src/setupvideo.cpp:161
4842 msgid "enable/disable ac3 default output (ok)"
4845 #: src/setupvideo.cpp:167
4846 msgid "Auto VCR switching"
4849 #: src/setupvideo.cpp:170
4850 msgid "auto switch to VCR connector"
4853 #: src/setupvideo.cpp:186
4857 #: src/setupvideo.cpp:191
4858 msgid "show testpicture"
4861 #: src/setupvideo.cpp:366
4862 msgid "TV System Wizard"
4865 #: src/software_update.cpp:34
4866 msgid "Internet Update"
4869 #: src/software_update.cpp:34
4870 msgid "open internet update"
4873 #: src/software_update.cpp:35
4874 msgid "Manual Update"
4877 #: src/software_update.cpp:35
4878 msgid "open manual update"
4881 #: src/software_update.cpp:37
4882 msgid "Expert Flash Save/Restore"
4885 #: src/software_update.cpp:37
4886 msgid "open expert flash tool"
4889 #: src/software_update.cpp:59
4891 "Upload your Image via FTP or Samba to the '/tmp' folder.Then rename it to "
4892 "'root.cramfs' and press ok.In the upcomming list select 'manual update' and "
4893 "follow the instructions."
4896 #: src/software_update.cpp:61
4897 msgid "Manual update"
4900 #: src/sselect.cpp:53
4901 msgid "EPG Style Selector"
4904 #: src/sselect.cpp:54
4905 msgid "open the EPG with selected style"
4908 #: src/sselect.cpp:61
4912 #: src/sselect.cpp:72
4916 #: src/sselect.cpp:72
4917 msgid "open EPG for selected Channel"
4920 #: src/sselect.cpp:73
4924 #: src/sselect.cpp:73
4925 msgid "open EPG for next five channels"
4928 #: src/sselect.cpp:79
4929 msgid "External EPG"
4932 #: src/sselect.cpp:79
4933 msgid "open external plugin EPG"
4936 #: src/sselect.cpp:124
4937 msgid "service selector"
4940 #: src/sselect.cpp:125
4941 msgid "switch to next bouquet"
4944 #: src/sselect.cpp:126
4945 msgid "switch to previous bouquet"
4948 #: src/sselect.cpp:127
4949 msgid "go up a directory"
4952 #: src/sselect.cpp:128
4953 msgid "shows the EPG selector for the highlighted channel"
4956 #: src/sselect.cpp:129
4957 msgid "show service selector menu"
4960 #: src/sselect.cpp:131
4961 msgid "add service to a specific bouquet"
4964 #: src/sselect.cpp:135
4965 msgid "toggle between classic and multi column style"
4968 #: src/sselect.cpp:136
4969 msgid "toggle focus between service and bouquet list (in combi column style)"
4972 #: src/sselect.cpp:137
4973 msgid "go to the prev Marker if exist.. else goto first service"
4976 #: src/sselect.cpp:138
4977 msgid "go to the next Marker if exist.. else goto last service"
4980 #: src/sselect.cpp:140
4981 msgid "show all services"
4984 #: src/sselect.cpp:141
4985 msgid "show satellite list"
4988 #: src/sselect.cpp:142
4989 msgid "show provider list"
4992 #: src/sselect.cpp:143
4993 msgid "show bouquet list"
4996 #: src/sselect.cpp:145
4997 msgid "delete selected entry"
5000 #: src/sselect.cpp:146
5001 msgid "mark selected entry for move"
5004 #: src/sselect.cpp:147
5005 msgid "rename selected entry"
5008 #: src/sselect.cpp:148
5009 msgid "create new marker entry"
5012 #: src/sselect.cpp:297
5016 #: src/sselect.cpp:299
5017 msgid "(removed service)"
5020 #: src/sselect.cpp:372
5024 #: src/sselect.cpp:374
5028 #: src/sselect.cpp:382
5029 msgid "All Services"
5032 #: src/sselect.cpp:384
5036 #: src/sselect.cpp:387
5040 #: src/sselect.cpp:392
5044 #: src/sselect.cpp:393
5048 #: src/sselect.cpp:887
5049 msgid "Select No or press Abort to lock/unlock the complete directory"
5052 #: src/sselect.cpp:887
5053 msgid "Enter Directory"
5056 #: src/streaminfo.cpp:165
5060 #: src/streaminfo.cpp:167
5064 #: src/streaminfo.cpp:169
5068 #: src/streaminfo.cpp:171
5072 #: src/streaminfo.cpp:173
5076 #: src/streaminfo.cpp:175
5080 #: src/streaminfo.cpp:177
5084 #: src/streaminfo.cpp:179
5088 #: src/streaminfo.cpp:398
5089 msgid "Video format:"
5092 #: src/streaminfo.cpp:477
5093 msgid "supported coding systems:"
5096 #: src/streaminfo.cpp:517
5097 msgid "Systems used in service:"
5100 #: src/streaminfo.cpp:554
5101 msgid "Record mode - read manual"
5104 #: src/streaminfo.cpp:664
5105 msgid "Service information (right)"
5108 #: src/streaminfo.cpp:665
5109 msgid "Scrambled system information (left, right)"
5112 #: src/streaminfo.cpp:666
5113 msgid "Transponder information (left)"
5116 #: src/timer.cpp:286
5120 #: src/timer.cpp:1585
5122 "You would delete the running event..\n"
5123 "this stops the timer mode (recording)!"
5126 #: src/timer.cpp:1586
5127 msgid "Delete the event from the timer list"
5130 #: src/timer.cpp:1587
5131 msgid "Really delete this event?"
5134 #: src/timer.cpp:1591
5136 "You would update the running event.. \n"
5137 "this stops the timer mode (recording)!"
5140 #: src/timer.cpp:1592
5141 msgid "Update event in timer list"
5144 #: src/timer.cpp:1593 src/timer.cpp:2511
5145 msgid "Really update this event?"
5148 #: src/timer.cpp:1743
5149 msgid "This event is already in the timerlist."
5152 #: src/timer.cpp:1744 src/timer.cpp:1795
5153 msgid "Add event to timerlist"
5156 #: src/timer.cpp:1784
5157 msgid "The Endtime overlaps with another event in the timerlist"
5160 #: src/timer.cpp:1784
5161 msgid "Set Stop Time"
5164 #: src/timer.cpp:1793
5166 "This event cannot added to the timerlist.\n"
5167 "The event overlaps with another event in the timerlist\n"
5168 "Please check the timerlist manually."
5171 #: src/timer.cpp:1874
5175 #: src/timer.cpp:1875
5176 msgid "add new event to Timerlist"
5179 #: src/timer.cpp:1876
5180 msgid "remove this entry from timer list"
5183 #: src/timer.cpp:2075
5187 #: src/timer.cpp:2153
5188 msgid "Timer Edit View"
5191 #: src/timer.cpp:2154
5192 msgid "increase the event begin time in 1 minute steps"
5195 #: src/timer.cpp:2155
5196 msgid "decrease the event begin time in 1 minute steps"
5199 #: src/timer.cpp:2156
5200 msgid "increase the event end time in 1 minute steps"
5203 #: src/timer.cpp:2157
5204 msgid "decrease the event end time in 1 minute steps"
5207 #: src/timer.cpp:2166
5211 #: src/timer.cpp:2166
5215 #: src/timer.cpp:2166
5219 #: src/timer.cpp:2167
5223 #: src/timer.cpp:2167
5227 #: src/timer.cpp:2167
5231 #: src/timer.cpp:2167
5235 #: src/timer.cpp:2168
5239 #: src/timer.cpp:2168
5243 #: src/timer.cpp:2168
5247 #: src/timer.cpp:2169
5251 #: src/timer.cpp:2169
5255 #: src/timer.cpp:2185
5259 #: src/timer.cpp:2185
5263 #: src/timer.cpp:2186
5267 #: src/timer.cpp:2186
5268 msgid "put box into standby"
5271 #: src/timer.cpp:2188
5272 msgid "put box into deep standby"
5275 #: src/timer.cpp:2287
5279 #: src/timer.cpp:2291
5283 #: src/timer.cpp:2297
5287 #: src/timer.cpp:2367
5288 msgid "unknown service"
5291 #: src/timer.cpp:2509
5293 "The new endtime is before now time!\n"
5294 "This stops the running timer(recording)\n"
5297 #: src/timer.cpp:2515 src/timer.cpp:2530 src/timer.cpp:2543 src/timer.cpp:2564
5298 msgid "Update event in timerlist"
5301 #: src/timer.cpp:2529
5302 msgid "New endtime are now adjusted"
5305 #: src/timer.cpp:2542
5306 msgid "The event has already finished... you can not change endtime!"
5309 #: src/timer.cpp:2564
5311 "Invalid begin or end time.!\n"
5312 "Please check time and date"
5315 #: src/timer.cpp:2736
5317 "Sorry, you can not add a time shifted service manually to the timer.\n"
5318 "Please close the Timer and use the EPG of the service you wish to add!"
5321 #: src/timer.cpp:2797
5322 msgid "no description found"
5325 #: src/tpeditwindow.cpp:57
5326 msgid "Satellite Edit"
5329 #: src/tpeditwindow.cpp:63
5330 msgid "press ok to change satellite name"
5333 #: src/tpeditwindow.cpp:81
5334 msgid "press ok to change direction"
5337 #: src/tpeditwindow.cpp:90
5338 msgid "Network search"
5341 #: src/tpeditwindow.cpp:91
5343 "scan Network Information Table(s)\n"
5347 #: src/tpeditwindow.cpp:96
5348 msgid "Extended networks search"
5351 #: src/tpeditwindow.cpp:97
5353 "scan NITs of other transponders\n"
5354 "this is slower, but sometimes needed)"
5357 #: src/tpeditwindow.cpp:102
5361 #: src/tpeditwindow.cpp:103
5362 msgid "use Provider DVB Bouquet Tables if exist"
5365 #: src/tpeditwindow.cpp:178
5366 msgid "add new Network"
5369 #: src/tpeditwindow.cpp:179
5370 msgid "remove selected Network"
5373 #: src/tpeditwindow.cpp:246
5374 msgid "Save changed Transponders?"
5377 #: src/tpeditwindow.cpp:247
5378 msgid "Transponders changed"
5381 #: src/tpeditwindow.cpp:258
5382 msgid "Transponders couldn't be written to file!"
5385 #: src/tpeditwindow.cpp:259
5389 #: src/tpeditwindow.cpp:439
5390 msgid "new Satellite"
5393 #: src/tpeditwindow.cpp:468
5394 msgid "Really delete the selected satellite?"
5397 #: src/tpeditwindow.cpp:469
5402 #: src/upgrade.cpp:147
5403 msgid "Please select the software version to upgrade to:"
5406 #: src/upgrade.cpp:184
5407 msgid "manual upload"
5410 #: src/upgrade.cpp:202
5411 msgid "downloading catalog..."
5414 #: src/upgrade.cpp:222
5415 msgid "downloading changelog..."
5418 #: src/upgrade.cpp:247
5419 msgid "downloading image..."
5422 #: src/upgrade.cpp:305
5423 msgid "Please select version to upgrade or LAME! to abort"
5426 #: src/upgrade.cpp:426 src/upgrade.cpp:508 src/upgrade.cpp:522
5430 #: src/upgrade.cpp:482
5431 msgid "Download aborted."
5434 #: src/upgrade.cpp:501
5435 msgid "checking consistency of file..."
5438 #: src/upgrade.cpp:505 src/upgrade.cpp:507
5439 msgid "write error while downloading..."
5442 #: src/upgrade.cpp:519 src/upgrade.cpp:521
5443 msgid "Data error. The checksum didn't match."
5446 #: src/upgrade.cpp:531
5447 msgid "Checksum OK. Ready to upgrade."
5450 #: src/upgrade.cpp:533
5451 msgid "Are you sure you want to upgrade to this new version?"
5454 #: src/upgrade.cpp:534
5455 msgid "Ready to upgrade"
5458 #: src/upgrade.cpp:570
5459 msgid "Can't read flashimage.img!"
5462 #: src/upgrade.cpp:570 src/upgrade.cpp:583 src/upgrade.cpp:706
5463 #: src/upgrade.cpp:717
5467 #: src/upgrade.cpp:583
5468 msgid "flashimage.img has filesize of 0byte!"
5471 #: src/upgrade.cpp:613 src/upgrade.cpp:691
5472 msgid "Please wait... do NOT switch off the receiver!"
5475 #: src/upgrade.cpp:614 src/upgrade.cpp:692
5476 msgid "upgrade in progress"
5479 #: src/upgrade.cpp:617 src/upgrade.cpp:703
5480 msgid "Erasing Flash..."
5483 #: src/upgrade.cpp:642 src/upgrade.cpp:732
5484 msgid "Writing Software to Flash..."
5487 #: src/upgrade.cpp:706
5488 msgid "Erase error!"
5491 #: src/upgrade.cpp:717
5492 msgid "Can't open mtd!"
5495 #: src/upgrade.cpp:756
5497 "upgrade successful!\n"
5501 #: src/upgrade.cpp:757
5505 #: src/upgrade.cpp:819
5506 msgid "This is the currently installed release."
5509 #: src/upgrade.cpp:822
5510 msgid "This is an older release."
5513 #: src/upgrade.cpp:825
5514 msgid "No changelog data available."
5517 #: src/upgrade.cpp:839
5518 msgid "No new features were added in this release."
5521 #: src/upgrade.cpp:842
5522 msgid "The following new features were added in this release:\n"
5525 #: src/wizard_fpupdate.cpp:13
5527 "New Software for the frontprocessor is avail.\n"
5528 "Your Dreambox must upgrade now!\n"
5529 "DO NOT TURN OFF THE POWER DURING UPDATE !!!."
5532 #: src/wizard_fpupdate.cpp:16
5533 msgid "New software avail"
5536 #: src/wizard_fpupdate.cpp:24
5538 "Upgrading frontprocessor...\n"
5539 "DO NOT TURN OFF THE POWER!\n"
5540 "THE DREAMBOX WILL AUTOMATICALLY REBOOT!\n"
5543 #: src/wizard_fpupdate.cpp:27
5544 msgid "Upgrade in process..."
5547 #: src/wizard_language.cpp:172
5548 msgid "Choose your language..."
5551 #: src/wizard_language.cpp:173
5552 msgid "press up/down/ok"
5555 #: src/wizard_scan.cpp:116
5556 msgid "Direct connection to one LNB"
5559 #: src/wizard_scan.cpp:119
5560 msgid "Simple DiSEqC (2 LNBs/satellites)"
5563 #: src/wizard_scan.cpp:122
5564 msgid "Complex configuration (including DiSEqC 1.2)"
5567 #: src/system_settings.cpp:41 src/time_settings.cpp:32
5568 msgid "Time Settings"
5571 #: src/system_settings.cpp:41
5572 msgid "open time settings"
5575 #: src/system_settings.cpp:43
5576 msgid "open A/V settings"
5579 #: src/system_settings.cpp:46
5580 msgid "UHF Modulator"
5583 #: src/system_settings.cpp:46
5584 msgid "open UHF-Modulator setup"
5587 #: src/system_settings.cpp:51
5588 msgid "Harddisc Setup"
5591 #: src/system_settings.cpp:51
5592 msgid "open harddisc setup"
5595 #: src/system_settings.cpp:56
5596 msgid "open keyboard setup"
5599 #: src/system_settings.cpp:59
5600 msgid "open on screen display settings"
5603 #: src/system_settings.cpp:60
5604 msgid "open language selector"
5607 #: src/system_settings.cpp:63
5608 msgid "LCD Settings"
5611 #: src/system_settings.cpp:63
5612 msgid "open LCD settings"
5615 #: src/system_settings.cpp:126
5616 msgid "sorry, no harddisks found!"
5619 #: src/system_settings.cpp:126
5620 msgid "Harddisk setup..."
5623 #: src/time_settings.cpp:36
5624 msgid "Timezone Configuration"
5627 #: src/time_settings.cpp:36
5628 msgid "open timezone selector"
5631 #: src/time_settings.cpp:37
5632 msgid "Time Correction"
5635 #: src/time_settings.cpp:37
5636 msgid "open time correction window"
5639 #: src/time_settings.cpp:72
5640 msgid "To change time correction you must tune first to any transponder"
5643 #: src/time_settings.cpp:72
5644 msgid "time correction change error"