sysdeps/gnu/errlist.c

   1 /* This file is generated from errno.texi by errlist.awk.  */
   2
   3 #include <errno.h>
   4 #include <libintl.h>
   5
   6 #ifndef ERR_REMAP
   7 # define ERR_REMAP(n) n
   8 #endif
   9
  10 #if !defined EMIT_ERR_MAX && !defined ERRLIST_NO_COMPAT
  11 # include <errlist-compat.h>
  12 #endif
  13 #ifdef ERR_MAX
  14 # define ERRLIST_SIZE ERR_MAX + 1
  15 #else
  16 # define ERRLIST_SIZE
  17 #endif
  18 const char *const _sys_errlist_internal[ERRLIST_SIZE] =
  19   {
  20     [0] = N_("Success"),
  21 #ifdef EPERM
  22 /*
  23 TRANS Operation not permitted; only the owner of the file (or other resource)
  24 TRANS or processes with special privileges can perform the operation. */
  25     [ERR_REMAP (EPERM)] = N_("Operation not permitted"),
  26 # if EPERM > ERR_MAX
  27 # undef ERR_MAX
  28 # define ERR_MAX EPERM
  29 # endif
  30 #endif
  31 #ifdef ENOENT
  32 /*
  33 TRANS No such file or directory.  This is a ``file doesn't exist'' error
  34 TRANS for ordinary files that are referenced in contexts where they are
  35 TRANS expected to already exist. */
  36     [ERR_REMAP (ENOENT)] = N_("No such file or directory"),
  37 # if ENOENT > ERR_MAX
  38 # undef ERR_MAX
  39 # define ERR_MAX ENOENT
  40 # endif
  41 #endif
  42 #ifdef ESRCH
  43 /*
  44 TRANS No process matches the specified process ID. */
  45     [ERR_REMAP (ESRCH)] = N_("No such process"),
  46 # if ESRCH > ERR_MAX
  47 # undef ERR_MAX
  48 # define ERR_MAX ESRCH
  49 # endif
  50 #endif
  51 #ifdef EINTR
  52 /*
  53 TRANS Interrupted function call; an asynchronous signal occurred and prevented
  54 TRANS completion of the call.  When this happens, you should try the call
  55 TRANS again.
  56 TRANS
  57 TRANS You can choose to have functions resume after a signal that is handled,
  58 TRANS rather than failing with @code{EINTR}; see @ref{Interrupted
  59 TRANS Primitives}. */
  60     [ERR_REMAP (EINTR)] = N_("Interrupted system call"),
  61 # if EINTR > ERR_MAX
  62 # undef ERR_MAX
  63 # define ERR_MAX EINTR
  64 # endif
  65 #endif
  66 #ifdef EIO
  67 /*
  68 TRANS Input/output error; usually used for physical read or write errors. */
  69     [ERR_REMAP (EIO)] = N_("Input/output error"),
  70 # if EIO > ERR_MAX
  71 # undef ERR_MAX
  72 # define ERR_MAX EIO
  73 # endif
  74 #endif
  75 #ifdef ENXIO
  76 /*
  77 TRANS No such device or address.  The system tried to use the device
  78 TRANS represented by a file you specified, and it couldn't find the device.
  79 TRANS This can mean that the device file was installed incorrectly, or that
  80 TRANS the physical device is missing or not correctly attached to the
  81 TRANS computer. */
  82     [ERR_REMAP (ENXIO)] = N_("No such device or address"),
  83 # if ENXIO > ERR_MAX
  84 # undef ERR_MAX
  85 # define ERR_MAX ENXIO
  86 # endif
  87 #endif
  88 #ifdef E2BIG
  89 /*
  90 TRANS Argument list too long; used when the arguments passed to a new program
  91 TRANS being executed with one of the @code{exec} functions (@pxref{Executing a
  92 TRANS File}) occupy too much memory space.  This condition never arises in the
  93 TRANS GNU system. */
  94     [ERR_REMAP (E2BIG)] = N_("Argument list too long"),
  95 # if E2BIG > ERR_MAX
  96 # undef ERR_MAX
  97 # define ERR_MAX E2BIG
  98 # endif
  99 #endif
 100 #ifdef ENOEXEC
 101 /*
 102 TRANS Invalid executable file format.  This condition is detected by the
 103 TRANS @code{exec} functions; see @ref{Executing a File}. */
 104     [ERR_REMAP (ENOEXEC)] = N_("Exec format error"),
 105 # if ENOEXEC > ERR_MAX
 106 # undef ERR_MAX
 107 # define ERR_MAX ENOEXEC
 108 # endif
 109 #endif
 110 #ifdef EBADF
 111 /*
 112 TRANS Bad file descriptor; for example, I/O on a descriptor that has been
 113 TRANS closed or reading from a descriptor open only for writing (or vice
 114 TRANS versa). */
 115     [ERR_REMAP (EBADF)] = N_("Bad file descriptor"),
 116 # if EBADF > ERR_MAX
 117 # undef ERR_MAX
 118 # define ERR_MAX EBADF
 119 # endif
 120 #endif
 121 #ifdef ECHILD
 122 /*
 123 TRANS There are no child processes.  This error happens on operations that are
 124 TRANS supposed to manipulate child processes, when there aren't any processes
 125 TRANS to manipulate. */
 126     [ERR_REMAP (ECHILD)] = N_("No child processes"),
 127 # if ECHILD > ERR_MAX
 128 # undef ERR_MAX
 129 # define ERR_MAX ECHILD
 130 # endif
 131 #endif
 132 #ifdef EDEADLK
 133 /*
 134 TRANS Deadlock avoided; allocating a system resource would have resulted in a
 135 TRANS deadlock situation.  The system does not guarantee that it will notice
 136 TRANS all such situations.  This error means you got lucky and the system
 137 TRANS noticed; it might just hang.  @xref{File Locks}, for an example. */
 138     [ERR_REMAP (EDEADLK)] = N_("Resource deadlock avoided"),
 139 # if EDEADLK > ERR_MAX
 140 # undef ERR_MAX
 141 # define ERR_MAX EDEADLK
 142 # endif
 143 #endif
 144 #ifdef ENOMEM
 145 /*
 146 TRANS No memory available.  The system cannot allocate more virtual memory
 147 TRANS because its capacity is full. */
 148     [ERR_REMAP (ENOMEM)] = N_("Cannot allocate memory"),
 149 # if ENOMEM > ERR_MAX
 150 # undef ERR_MAX
 151 # define ERR_MAX ENOMEM
 152 # endif
 153 #endif
 154 #ifdef EACCES
 155 /*
 156 TRANS Permission denied; the file permissions do not allow the attempted operation. */
 157     [ERR_REMAP (EACCES)] = N_("Permission denied"),
 158 # if EACCES > ERR_MAX
 159 # undef ERR_MAX
 160 # define ERR_MAX EACCES
 161 # endif
 162 #endif
 163 #ifdef EFAULT
 164 /*
 165 TRANS Bad address; an invalid pointer was detected.
 166 TRANS In the GNU system, this error never happens; you get a signal instead. */
 167     [ERR_REMAP (EFAULT)] = N_("Bad address"),
 168 # if EFAULT > ERR_MAX
 169 # undef ERR_MAX
 170 # define ERR_MAX EFAULT
 171 # endif
 172 #endif
 173 #ifdef ENOTBLK
 174 /*
 175 TRANS A file that isn't a block special file was given in a situation that
 176 TRANS requires one.  For example, trying to mount an ordinary file as a file
 177 TRANS system in Unix gives this error. */
 178     [ERR_REMAP (ENOTBLK)] = N_("Block device required"),
 179 # if ENOTBLK > ERR_MAX
 180 # undef ERR_MAX
 181 # define ERR_MAX ENOTBLK
 182 # endif
 183 #endif
 184 #ifdef EBUSY
 185 /*
 186 TRANS Resource busy; a system resource that can't be shared is already in use.
 187 TRANS For example, if you try to delete a file that is the root of a currently
 188 TRANS mounted filesystem, you get this error. */
 189     [ERR_REMAP (EBUSY)] = N_("Device or resource busy"),
 190 # if EBUSY > ERR_MAX
 191 # undef ERR_MAX
 192 # define ERR_MAX EBUSY
 193 # endif
 194 #endif
 195 #ifdef EEXIST
 196 /*
 197 TRANS File exists; an existing file was specified in a context where it only
 198 TRANS makes sense to specify a new file. */
 199     [ERR_REMAP (EEXIST)] = N_("File exists"),
 200 # if EEXIST > ERR_MAX
 201 # undef ERR_MAX
 202 # define ERR_MAX EEXIST
 203 # endif
 204 #endif
 205 #ifdef EXDEV
 206 /*
 207 TRANS An attempt to make an improper link across file systems was detected.
 208 TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but
 209 TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). */
 210     [ERR_REMAP (EXDEV)] = N_("Invalid cross-device link"),
 211 # if EXDEV > ERR_MAX
 212 # undef ERR_MAX
 213 # define ERR_MAX EXDEV
 214 # endif
 215 #endif
 216 #ifdef ENODEV
 217 /*
 218 TRANS The wrong type of device was given to a function that expects a
 219 TRANS particular sort of device. */
 220     [ERR_REMAP (ENODEV)] = N_("No such device"),
 221 # if ENODEV > ERR_MAX
 222 # undef ERR_MAX
 223 # define ERR_MAX ENODEV
 224 # endif
 225 #endif
 226 #ifdef ENOTDIR
 227 /*
 228 TRANS A file that isn't a directory was specified when a directory is required. */
 229     [ERR_REMAP (ENOTDIR)] = N_("Not a directory"),
 230 # if ENOTDIR > ERR_MAX
 231 # undef ERR_MAX
 232 # define ERR_MAX ENOTDIR
 233 # endif
 234 #endif
 235 #ifdef EISDIR
 236 /*
 237 TRANS File is a directory; you cannot open a directory for writing,
 238 TRANS or create or remove hard links to it. */
 239     [ERR_REMAP (EISDIR)] = N_("Is a directory"),
 240 # if EISDIR > ERR_MAX
 241 # undef ERR_MAX
 242 # define ERR_MAX EISDIR
 243 # endif
 244 #endif
 245 #ifdef EINVAL
 246 /*
 247 TRANS Invalid argument.  This is used to indicate various kinds of problems
 248 TRANS with passing the wrong argument to a library function. */
 249     [ERR_REMAP (EINVAL)] = N_("Invalid argument"),
 250 # if EINVAL > ERR_MAX
 251 # undef ERR_MAX
 252 # define ERR_MAX EINVAL
 253 # endif
 254 #endif
 255 #ifdef EMFILE
 256 /*
 257 TRANS The current process has too many files open and can't open any more.
 258 TRANS Duplicate descriptors do count toward this limit.
 259 TRANS
 260 TRANS In BSD and GNU, the number of open files is controlled by a resource
 261 TRANS limit that can usually be increased.  If you get this error, you might
 262 TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited;
 263 TRANS @pxref{Limits on Resources}. */
 264     [ERR_REMAP (EMFILE)] = N_("Too many open files"),
 265 # if EMFILE > ERR_MAX
 266 # undef ERR_MAX
 267 # define ERR_MAX EMFILE
 268 # endif
 269 #endif
 270 #ifdef ENFILE
 271 /*
 272 TRANS There are too many distinct file openings in the entire system.  Note
 273 TRANS that any number of linked channels count as just one file opening; see
 274 TRANS @ref{Linked Channels}.  This error never occurs in the GNU system. */
 275     [ERR_REMAP (ENFILE)] = N_("Too many open files in system"),
 276 # if ENFILE > ERR_MAX
 277 # undef ERR_MAX
 278 # define ERR_MAX ENFILE
 279 # endif
 280 #endif
 281 #ifdef ENOTTY
 282 /*
 283 TRANS Inappropriate I/O control operation, such as trying to set terminal
 284 TRANS modes on an ordinary file. */
 285     [ERR_REMAP (ENOTTY)] = N_("Inappropriate ioctl for device"),
 286 # if ENOTTY > ERR_MAX
 287 # undef ERR_MAX
 288 # define ERR_MAX ENOTTY
 289 # endif
 290 #endif
 291 #ifdef ETXTBSY
 292 /*
 293 TRANS An attempt to execute a file that is currently open for writing, or
 294 TRANS write to a file that is currently being executed.  Often using a
 295 TRANS debugger to run a program is considered having it open for writing and
 296 TRANS will cause this error.  (The name stands for ``text file busy''.)  This
 297 TRANS is not an error in the GNU system; the text is copied as necessary. */
 298     [ERR_REMAP (ETXTBSY)] = N_("Text file busy"),
 299 # if ETXTBSY > ERR_MAX
 300 # undef ERR_MAX
 301 # define ERR_MAX ETXTBSY
 302 # endif
 303 #endif
 304 #ifdef EFBIG
 305 /*
 306 TRANS File too big; the size of a file would be larger than allowed by the system. */
 307     [ERR_REMAP (EFBIG)] = N_("File too large"),
 308 # if EFBIG > ERR_MAX
 309 # undef ERR_MAX
 310 # define ERR_MAX EFBIG
 311 # endif
 312 #endif
 313 #ifdef ENOSPC
 314 /*
 315 TRANS No space left on device; write operation on a file failed because the
 316 TRANS disk is full. */
 317     [ERR_REMAP (ENOSPC)] = N_("No space left on device"),
 318 # if ENOSPC > ERR_MAX
 319 # undef ERR_MAX
 320 # define ERR_MAX ENOSPC
 321 # endif
 322 #endif
 323 #ifdef ESPIPE
 324 /*
 325 TRANS Invalid seek operation (such as on a pipe). */
 326     [ERR_REMAP (ESPIPE)] = N_("Illegal seek"),
 327 # if ESPIPE > ERR_MAX
 328 # undef ERR_MAX
 329 # define ERR_MAX ESPIPE
 330 # endif
 331 #endif
 332 #ifdef EROFS
 333 /*
 334 TRANS An attempt was made to modify something on a read-only file system. */
 335     [ERR_REMAP (EROFS)] = N_("Read-only file system"),
 336 # if EROFS > ERR_MAX
 337 # undef ERR_MAX
 338 # define ERR_MAX EROFS
 339 # endif
 340 #endif
 341 #ifdef EMLINK
 342 /*
 343 TRANS Too many links; the link count of a single file would become too large.
 344 TRANS @code{rename} can cause this error if the file being renamed already has
 345 TRANS as many links as it can take (@pxref{Renaming Files}). */
 346     [ERR_REMAP (EMLINK)] = N_("Too many links"),
 347 # if EMLINK > ERR_MAX
 348 # undef ERR_MAX
 349 # define ERR_MAX EMLINK
 350 # endif
 351 #endif
 352 #ifdef EPIPE
 353 /*
 354 TRANS Broken pipe; there is no process reading from the other end of a pipe.
 355 TRANS Every library function that returns this error code also generates a
 356 TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled
 357 TRANS or blocked.  Thus, your program will never actually see @code{EPIPE}
 358 TRANS unless it has handled or blocked @code{SIGPIPE}. */
 359     [ERR_REMAP (EPIPE)] = N_("Broken pipe"),
 360 # if EPIPE > ERR_MAX
 361 # undef ERR_MAX
 362 # define ERR_MAX EPIPE
 363 # endif
 364 #endif
 365 #ifdef EDOM
 366 /*
 367 TRANS Domain error; used by mathematical functions when an argument value does
 368 TRANS not fall into the domain over which the function is defined. */
 369     [ERR_REMAP (EDOM)] = N_("Numerical argument out of domain"),
 370 # if EDOM > ERR_MAX
 371 # undef ERR_MAX
 372 # define ERR_MAX EDOM
 373 # endif
 374 #endif
 375 #ifdef ERANGE
 376 /*
 377 TRANS Range error; used by mathematical functions when the result value is
 378 TRANS not representable because of overflow or underflow. */
 379     [ERR_REMAP (ERANGE)] = N_("Numerical result out of range"),
 380 # if ERANGE > ERR_MAX
 381 # undef ERR_MAX
 382 # define ERR_MAX ERANGE
 383 # endif
 384 #endif
 385 #ifdef EAGAIN
 386 /*
 387 TRANS Resource temporarily unavailable; the call might work if you try again
 388 TRANS later.  The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN};
 389 TRANS they are always the same in the GNU C library.
 390 TRANS
 391 TRANS This error can happen in a few different situations:
 392 TRANS
 393 TRANS @itemize @bullet
 394 TRANS @item
 395 TRANS An operation that would block was attempted on an object that has
 396 TRANS non-blocking mode selected.  Trying the same operation again will block
 397 TRANS until some external condition makes it possible to read, write, or
 398 TRANS connect (whatever the operation).  You can use @code{select} to find out
 399 TRANS when the operation will be possible; @pxref{Waiting for I/O}.
 400 TRANS
 401 TRANS @strong{Portability Note:} In many older Unix systems, this condition
 402 TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code
 403 TRANS different from @code{EAGAIN}.  To make your program portable, you should
 404 TRANS check for both codes and treat them the same.
 405 TRANS
 406 TRANS @item
 407 TRANS A temporary resource shortage made an operation impossible.  @code{fork}
 408 TRANS can return this error.  It indicates that the shortage is expected to
 409 TRANS pass, so your program can try the call again later and it may succeed.
 410 TRANS It is probably a good idea to delay for a few seconds before trying it
 411 TRANS again, to allow time for other processes to release scarce resources.
 412 TRANS Such shortages are usually fairly serious and affect the whole system,
 413 TRANS so usually an interactive program should report the error to the user
 414 TRANS and return to its command loop.
 415 TRANS @end itemize */
 416     [ERR_REMAP (EAGAIN)] = N_("Resource temporarily unavailable"),
 417 # if EAGAIN > ERR_MAX
 418 # undef ERR_MAX
 419 # define ERR_MAX EAGAIN
 420 # endif
 421 #endif
 422 #if defined (EWOULDBLOCK) && EWOULDBLOCK != EAGAIN
 423 /*
 424 TRANS In the GNU C library, this is another name for @code{EAGAIN} (above).
 425 TRANS The values are always the same, on every operating system.
 426 TRANS
 427 TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a
 428 TRANS separate error code. */
 429     [ERR_REMAP (EWOULDBLOCK)] = N_("Operation would block"),
 430 # if EWOULDBLOCK > ERR_MAX
 431 # undef ERR_MAX
 432 # define ERR_MAX EWOULDBLOCK
 433 # endif
 434 #endif
 435 #ifdef EINPROGRESS
 436 /*
 437 TRANS An operation that cannot complete immediately was initiated on an object
 438 TRANS that has non-blocking mode selected.  Some functions that must always
 439 TRANS block (such as @code{connect}; @pxref{Connecting}) never return
 440 TRANS @code{EAGAIN}.  Instead, they return @code{EINPROGRESS} to indicate that
 441 TRANS the operation has begun and will take some time.  Attempts to manipulate
 442 TRANS the object before the call completes return @code{EALREADY}.  You can
 443 TRANS use the @code{select} function to find out when the pending operation
 444 TRANS has completed; @pxref{Waiting for I/O}. */
 445     [ERR_REMAP (EINPROGRESS)] = N_("Operation now in progress"),
 446 # if EINPROGRESS > ERR_MAX
 447 # undef ERR_MAX
 448 # define ERR_MAX EINPROGRESS
 449 # endif
 450 #endif
 451 #ifdef EALREADY
 452 /*
 453 TRANS An operation is already in progress on an object that has non-blocking
 454 TRANS mode selected. */
 455     [ERR_REMAP (EALREADY)] = N_("Operation already in progress"),
 456 # if EALREADY > ERR_MAX
 457 # undef ERR_MAX
 458 # define ERR_MAX EALREADY
 459 # endif
 460 #endif
 461 #ifdef ENOTSOCK
 462 /*
 463 TRANS A file that isn't a socket was specified when a socket is required. */
 464     [ERR_REMAP (ENOTSOCK)] = N_("Socket operation on non-socket"),
 465 # if ENOTSOCK > ERR_MAX
 466 # undef ERR_MAX
 467 # define ERR_MAX ENOTSOCK
 468 # endif
 469 #endif
 470 #ifdef EMSGSIZE
 471 /*
 472 TRANS The size of a message sent on a socket was larger than the supported
 473 TRANS maximum size. */
 474     [ERR_REMAP (EMSGSIZE)] = N_("Message too long"),
 475 # if EMSGSIZE > ERR_MAX
 476 # undef ERR_MAX
 477 # define ERR_MAX EMSGSIZE
 478 # endif
 479 #endif
 480 #ifdef EPROTOTYPE
 481 /*
 482 TRANS The socket type does not support the requested communications protocol. */
 483     [ERR_REMAP (EPROTOTYPE)] = N_("Protocol wrong type for socket"),
 484 # if EPROTOTYPE > ERR_MAX
 485 # undef ERR_MAX
 486 # define ERR_MAX EPROTOTYPE
 487 # endif
 488 #endif
 489 #ifdef ENOPROTOOPT
 490 /*
 491 TRANS You specified a socket option that doesn't make sense for the
 492 TRANS particular protocol being used by the socket.  @xref{Socket Options}. */
 493     [ERR_REMAP (ENOPROTOOPT)] = N_("Protocol not available"),
 494 # if ENOPROTOOPT > ERR_MAX
 495 # undef ERR_MAX
 496 # define ERR_MAX ENOPROTOOPT
 497 # endif
 498 #endif
 499 #ifdef EPROTONOSUPPORT
 500 /*
 501 TRANS The socket domain does not support the requested communications protocol
 502 TRANS (perhaps because the requested protocol is completely invalid).
 503 TRANS @xref{Creating a Socket}. */
 504     [ERR_REMAP (EPROTONOSUPPORT)] = N_("Protocol not supported"),
 505 # if EPROTONOSUPPORT > ERR_MAX
 506 # undef ERR_MAX
 507 # define ERR_MAX EPROTONOSUPPORT
 508 # endif
 509 #endif
 510 #ifdef ESOCKTNOSUPPORT
 511 /*
 512 TRANS The socket type is not supported. */
 513     [ERR_REMAP (ESOCKTNOSUPPORT)] = N_("Socket type not supported"),
 514 # if ESOCKTNOSUPPORT > ERR_MAX
 515 # undef ERR_MAX
 516 # define ERR_MAX ESOCKTNOSUPPORT
 517 # endif
 518 #endif
 519 #ifdef EOPNOTSUPP
 520 /*
 521 TRANS The operation you requested is not supported.  Some socket functions
 522 TRANS don't make sense for all types of sockets, and others may not be
 523 TRANS implemented for all communications protocols.  In the GNU system, this
 524 TRANS error can happen for many calls when the object does not support the
 525 TRANS particular operation; it is a generic indication that the server knows
 526 TRANS nothing to do for that call. */
 527     [ERR_REMAP (EOPNOTSUPP)] = N_("Operation not supported"),
 528 # if EOPNOTSUPP > ERR_MAX
 529 # undef ERR_MAX
 530 # define ERR_MAX EOPNOTSUPP
 531 # endif
 532 #endif
 533 #ifdef EPFNOSUPPORT
 534 /*
 535 TRANS The socket communications protocol family you requested is not supported. */
 536     [ERR_REMAP (EPFNOSUPPORT)] = N_("Protocol family not supported"),
 537 # if EPFNOSUPPORT > ERR_MAX
 538 # undef ERR_MAX
 539 # define ERR_MAX EPFNOSUPPORT
 540 # endif
 541 #endif
 542 #ifdef EAFNOSUPPORT
 543 /*
 544 TRANS The address family specified for a socket is not supported; it is
 545 TRANS inconsistent with the protocol being used on the socket.  @xref{Sockets}. */
 546     [ERR_REMAP (EAFNOSUPPORT)] = N_("Address family not supported by protocol"),
 547 # if EAFNOSUPPORT > ERR_MAX
 548 # undef ERR_MAX
 549 # define ERR_MAX EAFNOSUPPORT
 550 # endif
 551 #endif
 552 #ifdef EADDRINUSE
 553 /*
 554 TRANS The requested socket address is already in use.  @xref{Socket Addresses}. */
 555     [ERR_REMAP (EADDRINUSE)] = N_("Address already in use"),
 556 # if EADDRINUSE > ERR_MAX
 557 # undef ERR_MAX
 558 # define ERR_MAX EADDRINUSE
 559 # endif
 560 #endif
 561 #ifdef EADDRNOTAVAIL
 562 /*
 563 TRANS The requested socket address is not available; for example, you tried
 564 TRANS to give a socket a name that doesn't match the local host name.
 565 TRANS @xref{Socket Addresses}. */
 566     [ERR_REMAP (EADDRNOTAVAIL)] = N_("Cannot assign requested address"),
 567 # if EADDRNOTAVAIL > ERR_MAX
 568 # undef ERR_MAX
 569 # define ERR_MAX EADDRNOTAVAIL
 570 # endif
 571 #endif
 572 #ifdef ENETDOWN
 573 /*
 574 TRANS A socket operation failed because the network was down. */
 575     [ERR_REMAP (ENETDOWN)] = N_("Network is down"),
 576 # if ENETDOWN > ERR_MAX
 577 # undef ERR_MAX
 578 # define ERR_MAX ENETDOWN
 579 # endif
 580 #endif
 581 #ifdef ENETUNREACH
 582 /*
 583 TRANS A socket operation failed because the subnet containing the remote host
 584 TRANS was unreachable. */
 585     [ERR_REMAP (ENETUNREACH)] = N_("Network is unreachable"),
 586 # if ENETUNREACH > ERR_MAX
 587 # undef ERR_MAX
 588 # define ERR_MAX ENETUNREACH
 589 # endif
 590 #endif
 591 #ifdef ENETRESET
 592 /*
 593 TRANS A network connection was reset because the remote host crashed. */
 594     [ERR_REMAP (ENETRESET)] = N_("Network dropped connection on reset"),
 595 # if ENETRESET > ERR_MAX
 596 # undef ERR_MAX
 597 # define ERR_MAX ENETRESET
 598 # endif
 599 #endif
 600 #ifdef ECONNABORTED
 601 /*
 602 TRANS A network connection was aborted locally. */
 603     [ERR_REMAP (ECONNABORTED)] = N_("Software caused connection abort"),
 604 # if ECONNABORTED > ERR_MAX
 605 # undef ERR_MAX
 606 # define ERR_MAX ECONNABORTED
 607 # endif
 608 #endif
 609 #ifdef ECONNRESET
 610 /*
 611 TRANS A network connection was closed for reasons outside the control of the
 612 TRANS local host, such as by the remote machine rebooting or an unrecoverable
 613 TRANS protocol violation. */
 614     [ERR_REMAP (ECONNRESET)] = N_("Connection reset by peer"),
 615 # if ECONNRESET > ERR_MAX
 616 # undef ERR_MAX
 617 # define ERR_MAX ECONNRESET
 618 # endif
 619 #endif
 620 #ifdef ENOBUFS
 621 /*
 622 TRANS The kernel's buffers for I/O operations are all in use.  In GNU, this
 623 TRANS error is always synonymous with @code{ENOMEM}; you may get one or the
 624 TRANS other from network operations. */
 625     [ERR_REMAP (ENOBUFS)] = N_("No buffer space available"),
 626 # if ENOBUFS > ERR_MAX
 627 # undef ERR_MAX
 628 # define ERR_MAX ENOBUFS
 629 # endif
 630 #endif
 631 #ifdef EISCONN
 632 /*
 633 TRANS You tried to connect a socket that is already connected.
 634 TRANS @xref{Connecting}. */
 635     [ERR_REMAP (EISCONN)] = N_("Transport endpoint is already connected"),
 636 # if EISCONN > ERR_MAX
 637 # undef ERR_MAX
 638 # define ERR_MAX EISCONN
 639 # endif
 640 #endif
 641 #ifdef ENOTCONN
 642 /*
 643 TRANS The socket is not connected to anything.  You get this error when you
 644 TRANS try to transmit data over a socket, without first specifying a
 645 TRANS destination for the data.  For a connectionless socket (for datagram
 646 TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. */
 647     [ERR_REMAP (ENOTCONN)] = N_("Transport endpoint is not connected"),
 648 # if ENOTCONN > ERR_MAX
 649 # undef ERR_MAX
 650 # define ERR_MAX ENOTCONN
 651 # endif
 652 #endif
 653 #ifdef EDESTADDRREQ
 654 /*
 655 TRANS No default destination address was set for the socket.  You get this
 656 TRANS error when you try to transmit data over a connectionless socket,
 657 TRANS without first specifying a destination for the data with @code{connect}. */
 658     [ERR_REMAP (EDESTADDRREQ)] = N_("Destination address required"),
 659 # if EDESTADDRREQ > ERR_MAX
 660 # undef ERR_MAX
 661 # define ERR_MAX EDESTADDRREQ
 662 # endif
 663 #endif
 664 #ifdef ESHUTDOWN
 665 /*
 666 TRANS The socket has already been shut down. */
 667     [ERR_REMAP (ESHUTDOWN)] = N_("Cannot send after transport endpoint shutdown"),
 668 # if ESHUTDOWN > ERR_MAX
 669 # undef ERR_MAX
 670 # define ERR_MAX ESHUTDOWN
 671 # endif
 672 #endif
 673 #ifdef ETOOMANYREFS
 674 /*
 675 TRANS ??? */
 676     [ERR_REMAP (ETOOMANYREFS)] = N_("Too many references: cannot splice"),
 677 # if ETOOMANYREFS > ERR_MAX
 678 # undef ERR_MAX
 679 # define ERR_MAX ETOOMANYREFS
 680 # endif
 681 #endif
 682 #ifdef ETIMEDOUT
 683 /*
 684 TRANS A socket operation with a specified timeout received no response during
 685 TRANS the timeout period. */
 686     [ERR_REMAP (ETIMEDOUT)] = N_("Connection timed out"),
 687 # if ETIMEDOUT > ERR_MAX
 688 # undef ERR_MAX
 689 # define ERR_MAX ETIMEDOUT
 690 # endif
 691 #endif
 692 #ifdef ECONNREFUSED
 693 /*
 694 TRANS A remote host refused to allow the network connection (typically because
 695 TRANS it is not running the requested service). */
 696     [ERR_REMAP (ECONNREFUSED)] = N_("Connection refused"),
 697 # if ECONNREFUSED > ERR_MAX
 698 # undef ERR_MAX
 699 # define ERR_MAX ECONNREFUSED
 700 # endif
 701 #endif
 702 #ifdef ELOOP
 703 /*
 704 TRANS Too many levels of symbolic links were encountered in looking up a file name.
 705 TRANS This often indicates a cycle of symbolic links. */
 706     [ERR_REMAP (ELOOP)] = N_("Too many levels of symbolic links"),
 707 # if ELOOP > ERR_MAX
 708 # undef ERR_MAX
 709 # define ERR_MAX ELOOP
 710 # endif
 711 #endif
 712 #ifdef ENAMETOOLONG
 713 /*
 714 TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for
 715 TRANS Files}) or host name too long (in @code{gethostname} or
 716 TRANS @code{sethostname}; @pxref{Host Identification}). */
 717     [ERR_REMAP (ENAMETOOLONG)] = N_("File name too long"),
 718 # if ENAMETOOLONG > ERR_MAX
 719 # undef ERR_MAX
 720 # define ERR_MAX ENAMETOOLONG
 721 # endif
 722 #endif
 723 #ifdef EHOSTDOWN
 724 /*
 725 TRANS The remote host for a requested network connection is down. */
 726     [ERR_REMAP (EHOSTDOWN)] = N_("Host is down"),
 727 # if EHOSTDOWN > ERR_MAX
 728 # undef ERR_MAX
 729 # define ERR_MAX EHOSTDOWN
 730 # endif
 731 #endif
 732 #ifdef EHOSTUNREACH
 733 /*
 734 TRANS The remote host for a requested network connection is not reachable. */
 735     [ERR_REMAP (EHOSTUNREACH)] = N_("No route to host"),
 736 # if EHOSTUNREACH > ERR_MAX
 737 # undef ERR_MAX
 738 # define ERR_MAX EHOSTUNREACH
 739 # endif
 740 #endif
 741 #ifdef ENOTEMPTY
 742 /*
 743 TRANS Directory not empty, where an empty directory was expected.  Typically,
 744 TRANS this error occurs when you are trying to delete a directory. */
 745     [ERR_REMAP (ENOTEMPTY)] = N_("Directory not empty"),
 746 # if ENOTEMPTY > ERR_MAX
 747 # undef ERR_MAX
 748 # define ERR_MAX ENOTEMPTY
 749 # endif
 750 #endif
 751 #ifdef EPROCLIM
 752 /*
 753 TRANS This means that the per-user limit on new process would be exceeded by
 754 TRANS an attempted @code{fork}.  @xref{Limits on Resources}, for details on
 755 TRANS the @code{RLIMIT_NPROC} limit. */
 756     [ERR_REMAP (EPROCLIM)] = N_("Too many processes"),
 757 # if EPROCLIM > ERR_MAX
 758 # undef ERR_MAX
 759 # define ERR_MAX EPROCLIM
 760 # endif
 761 #endif
 762 #ifdef EUSERS
 763 /*
 764 TRANS The file quota system is confused because there are too many users.
 765 TRANS @c This can probably happen in a GNU system when using NFS. */
 766     [ERR_REMAP (EUSERS)] = N_("Too many users"),
 767 # if EUSERS > ERR_MAX
 768 # undef ERR_MAX
 769 # define ERR_MAX EUSERS
 770 # endif
 771 #endif
 772 #ifdef EDQUOT
 773 /*
 774 TRANS The user's disk quota was exceeded. */
 775     [ERR_REMAP (EDQUOT)] = N_("Disk quota exceeded"),
 776 # if EDQUOT > ERR_MAX
 777 # undef ERR_MAX
 778 # define ERR_MAX EDQUOT
 779 # endif
 780 #endif
 781 #ifdef ESTALE
 782 /*
 783 TRANS Stale NFS file handle.  This indicates an internal confusion in the NFS
 784 TRANS system which is due to file system rearrangements on the server host.
 785 TRANS Repairing this condition usually requires unmounting and remounting
 786 TRANS the NFS file system on the local host. */
 787     [ERR_REMAP (ESTALE)] = N_("Stale NFS file handle"),
 788 # if ESTALE > ERR_MAX
 789 # undef ERR_MAX
 790 # define ERR_MAX ESTALE
 791 # endif
 792 #endif
 793 #ifdef EREMOTE
 794 /*
 795 TRANS An attempt was made to NFS-mount a remote file system with a file name that
 796 TRANS already specifies an NFS-mounted file.
 797 TRANS (This is an error on some operating systems, but we expect it to work
 798 TRANS properly on the GNU system, making this error code impossible.) */
 799     [ERR_REMAP (EREMOTE)] = N_("Object is remote"),
 800 # if EREMOTE > ERR_MAX
 801 # undef ERR_MAX
 802 # define ERR_MAX EREMOTE
 803 # endif
 804 #endif
 805 #ifdef EBADRPC
 806 /*
 807 TRANS ??? */
 808     [ERR_REMAP (EBADRPC)] = N_("RPC struct is bad"),
 809 # if EBADRPC > ERR_MAX
 810 # undef ERR_MAX
 811 # define ERR_MAX EBADRPC
 812 # endif
 813 #endif
 814 #ifdef ERPCMISMATCH
 815 /*
 816 TRANS ??? */
 817     [ERR_REMAP (ERPCMISMATCH)] = N_("RPC version wrong"),
 818 # if ERPCMISMATCH > ERR_MAX
 819 # undef ERR_MAX
 820 # define ERR_MAX ERPCMISMATCH
 821 # endif
 822 #endif
 823 #ifdef EPROGUNAVAIL
 824 /*
 825 TRANS ??? */
 826     [ERR_REMAP (EPROGUNAVAIL)] = N_("RPC program not available"),
 827 # if EPROGUNAVAIL > ERR_MAX
 828 # undef ERR_MAX
 829 # define ERR_MAX EPROGUNAVAIL
 830 # endif
 831 #endif
 832 #ifdef EPROGMISMATCH
 833 /*
 834 TRANS ??? */
 835     [ERR_REMAP (EPROGMISMATCH)] = N_("RPC program version wrong"),
 836 # if EPROGMISMATCH > ERR_MAX
 837 # undef ERR_MAX
 838 # define ERR_MAX EPROGMISMATCH
 839 # endif
 840 #endif
 841 #ifdef EPROCUNAVAIL
 842 /*
 843 TRANS ??? */
 844     [ERR_REMAP (EPROCUNAVAIL)] = N_("RPC bad procedure for program"),
 845 # if EPROCUNAVAIL > ERR_MAX
 846 # undef ERR_MAX
 847 # define ERR_MAX EPROCUNAVAIL
 848 # endif
 849 #endif
 850 #ifdef ENOLCK
 851 /*
 852 TRANS No locks available.  This is used by the file locking facilities; see
 853 TRANS @ref{File Locks}.  This error is never generated by the GNU system, but
 854 TRANS it can result from an operation to an NFS server running another
 855 TRANS operating system. */
 856     [ERR_REMAP (ENOLCK)] = N_("No locks available"),
 857 # if ENOLCK > ERR_MAX
 858 # undef ERR_MAX
 859 # define ERR_MAX ENOLCK
 860 # endif
 861 #endif
 862 #ifdef EFTYPE
 863 /*
 864 TRANS Inappropriate file type or format.  The file was the wrong type for the
 865 TRANS operation, or a data file had the wrong format.
 866 TRANS
 867 TRANS On some systems @code{chmod} returns this error if you try to set the
 868 TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. */
 869     [ERR_REMAP (EFTYPE)] = N_("Inappropriate file type or format"),
 870 # if EFTYPE > ERR_MAX
 871 # undef ERR_MAX
 872 # define ERR_MAX EFTYPE
 873 # endif
 874 #endif
 875 #ifdef EAUTH
 876 /*
 877 TRANS ??? */
 878     [ERR_REMAP (EAUTH)] = N_("Authentication error"),
 879 # if EAUTH > ERR_MAX
 880 # undef ERR_MAX
 881 # define ERR_MAX EAUTH
 882 # endif
 883 #endif
 884 #ifdef ENEEDAUTH
 885 /*
 886 TRANS ??? */
 887     [ERR_REMAP (ENEEDAUTH)] = N_("Need authenticator"),
 888 # if ENEEDAUTH > ERR_MAX
 889 # undef ERR_MAX
 890 # define ERR_MAX ENEEDAUTH
 891 # endif
 892 #endif
 893 #ifdef ENOSYS
 894 /*
 895 TRANS Function not implemented.  This indicates that the function called is
 896 TRANS not implemented at all, either in the C library itself or in the
 897 TRANS operating system.  When you get this error, you can be sure that this
 898 TRANS particular function will always fail with @code{ENOSYS} unless you
 899 TRANS install a new version of the C library or the operating system. */
 900     [ERR_REMAP (ENOSYS)] = N_("Function not implemented"),
 901 # if ENOSYS > ERR_MAX
 902 # undef ERR_MAX
 903 # define ERR_MAX ENOSYS
 904 # endif
 905 #endif
 906 #if defined (ENOTSUP) && ENOTSUP != EOPNOTSUPP
 907 /*
 908 TRANS Not supported.  A function returns this error when certain parameter
 909 TRANS values are valid, but the functionality they request is not available.
 910 TRANS This can mean that the function does not implement a particular command
 911 TRANS or option value or flag bit at all.  For functions that operate on some
 912 TRANS object given in a parameter, such as a file descriptor or a port, it
 913 TRANS might instead mean that only @emph{that specific object} (file
 914 TRANS descriptor, port, etc.) is unable to support the other parameters given;
 915 TRANS different file descriptors might support different ranges of parameter
 916 TRANS values.
 917 TRANS
 918 TRANS If the entire function is not available at all in the implementation,
 919 TRANS it returns @code{ENOSYS} instead. */
 920     [ERR_REMAP (ENOTSUP)] = N_("Not supported"),
 921 # if ENOTSUP > ERR_MAX
 922 # undef ERR_MAX
 923 # define ERR_MAX ENOTSUP
 924 # endif
 925 #endif
 926 #ifdef EILSEQ
 927 /*
 928 TRANS While decoding a multibyte character the function came along an invalid
 929 TRANS or an incomplete sequence of bytes or the given wide character is invalid. */
 930     [ERR_REMAP (EILSEQ)] = N_("Invalid or incomplete multibyte or wide character"),
 931 # if EILSEQ > ERR_MAX
 932 # undef ERR_MAX
 933 # define ERR_MAX EILSEQ
 934 # endif
 935 #endif
 936 #ifdef EBACKGROUND
 937 /*
 938 TRANS In the GNU system, servers supporting the @code{term} protocol return
 939 TRANS this error for certain operations when the caller is not in the
 940 TRANS foreground process group of the terminal.  Users do not usually see this
 941 TRANS error because functions such as @code{read} and @code{write} translate
 942 TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal.  @xref{Job Control},
 943 TRANS for information on process groups and these signals. */
 944     [ERR_REMAP (EBACKGROUND)] = N_("Inappropriate operation for background process"),
 945 # if EBACKGROUND > ERR_MAX
 946 # undef ERR_MAX
 947 # define ERR_MAX EBACKGROUND
 948 # endif
 949 #endif
 950 #ifdef EDIED
 951 /*
 952 TRANS In the GNU system, opening a file returns this error when the file is
 953 TRANS translated by a program and the translator program dies while starting
 954 TRANS up, before it has connected to the file. */
 955     [ERR_REMAP (EDIED)] = N_("Translator died"),
 956 # if EDIED > ERR_MAX
 957 # undef ERR_MAX
 958 # define ERR_MAX EDIED
 959 # endif
 960 #endif
 961 #ifdef ED
 962 /*
 963 TRANS The experienced user will know what is wrong.
 964 TRANS @c This error code is a joke.  Its perror text is part of the joke.
 965 TRANS @c Don't change it. */
 966     [ERR_REMAP (ED)] = N_("?"),
 967 # if ED > ERR_MAX
 968 # undef ERR_MAX
 969 # define ERR_MAX ED
 970 # endif
 971 #endif
 972 #ifdef EGREGIOUS
 973 /*
 974 TRANS You did @strong{what}? */
 975     [ERR_REMAP (EGREGIOUS)] = N_("You really blew it this time"),
 976 # if EGREGIOUS > ERR_MAX
 977 # undef ERR_MAX
 978 # define ERR_MAX EGREGIOUS
 979 # endif
 980 #endif
 981 #ifdef EIEIO
 982 /*
 983 TRANS Go home and have a glass of warm, dairy-fresh milk. */
 984     [ERR_REMAP (EIEIO)] = N_("Computer bought the farm"),
 985 # if EIEIO > ERR_MAX
 986 # undef ERR_MAX
 987 # define ERR_MAX EIEIO
 988 # endif
 989 #endif
 990 #ifdef EGRATUITOUS
 991 /*
 992 TRANS This error code has no purpose. */
 993     [ERR_REMAP (EGRATUITOUS)] = N_("Gratuitous error"),
 994 # if EGRATUITOUS > ERR_MAX
 995 # undef ERR_MAX
 996 # define ERR_MAX EGRATUITOUS
 997 # endif
 998 #endif
 999 #ifdef EBADMSG
1000 /* */
1001     [ERR_REMAP (EBADMSG)] = N_("Bad message"),
1002 # if EBADMSG > ERR_MAX
1003 # undef ERR_MAX
1004 # define ERR_MAX EBADMSG
1005 # endif
1006 #endif
1007 #ifdef EIDRM
1008 /* */
1009     [ERR_REMAP (EIDRM)] = N_("Identifier removed"),
1010 # if EIDRM > ERR_MAX
1011 # undef ERR_MAX
1012 # define ERR_MAX EIDRM
1013 # endif
1014 #endif
1015 #ifdef EMULTIHOP
1016 /* */
1017     [ERR_REMAP (EMULTIHOP)] = N_("Multihop attempted"),
1018 # if EMULTIHOP > ERR_MAX
1019 # undef ERR_MAX
1020 # define ERR_MAX EMULTIHOP
1021 # endif
1022 #endif
1023 #ifdef ENODATA
1024 /* */
1025     [ERR_REMAP (ENODATA)] = N_("No data available"),
1026 # if ENODATA > ERR_MAX
1027 # undef ERR_MAX
1028 # define ERR_MAX ENODATA
1029 # endif
1030 #endif
1031 #ifdef ENOLINK
1032 /* */
1033     [ERR_REMAP (ENOLINK)] = N_("Link has been severed"),
1034 # if ENOLINK > ERR_MAX
1035 # undef ERR_MAX
1036 # define ERR_MAX ENOLINK
1037 # endif
1038 #endif
1039 #ifdef ENOMSG
1040 /* */
1041     [ERR_REMAP (ENOMSG)] = N_("No message of desired type"),
1042 # if ENOMSG > ERR_MAX
1043 # undef ERR_MAX
1044 # define ERR_MAX ENOMSG
1045 # endif
1046 #endif
1047 #ifdef ENOSR
1048 /* */
1049     [ERR_REMAP (ENOSR)] = N_("Out of streams resources"),
1050 # if ENOSR > ERR_MAX
1051 # undef ERR_MAX
1052 # define ERR_MAX ENOSR
1053 # endif
1054 #endif
1055 #ifdef ENOSTR
1056 /* */
1057     [ERR_REMAP (ENOSTR)] = N_("Device not a stream"),
1058 # if ENOSTR > ERR_MAX
1059 # undef ERR_MAX
1060 # define ERR_MAX ENOSTR
1061 # endif
1062 #endif
1063 #ifdef EOVERFLOW
1064 /* */
1065     [ERR_REMAP (EOVERFLOW)] = N_("Value too large for defined data type"),
1066 # if EOVERFLOW > ERR_MAX
1067 # undef ERR_MAX
1068 # define ERR_MAX EOVERFLOW
1069 # endif
1070 #endif
1071 #ifdef EPROTO
1072 /* */
1073     [ERR_REMAP (EPROTO)] = N_("Protocol error"),
1074 # if EPROTO > ERR_MAX
1075 # undef ERR_MAX
1076 # define ERR_MAX EPROTO
1077 # endif
1078 #endif
1079 #ifdef ETIME
1080 /* */
1081     [ERR_REMAP (ETIME)] = N_("Timer expired"),
1082 # if ETIME > ERR_MAX
1083 # undef ERR_MAX
1084 # define ERR_MAX ETIME
1085 # endif
1086 #endif
1087 #ifdef ECANCELED
1088 /*
1089 TRANS Operation canceled; an asynchronous operation was canceled before it
1090 TRANS completed.  @xref{Asynchronous I/O}.  When you call @code{aio_cancel},
1091 TRANS the normal result is for the operations affected to complete with this
1092 TRANS error; @pxref{Cancel AIO Operations}. */
1093     [ERR_REMAP (ECANCELED)] = N_("Operation canceled"),
1094 # if ECANCELED > ERR_MAX
1095 # undef ERR_MAX
1096 # define ERR_MAX ECANCELED
1097 # endif
1098 #endif
1099 #ifdef ERESTART
1100 /* */
1101     [ERR_REMAP (ERESTART)] = N_("Interrupted system call should be restarted"),
1102 # if ERESTART > ERR_MAX
1103 # undef ERR_MAX
1104 # define ERR_MAX ERESTART
1105 # endif
1106 #endif
1107 #ifdef ECHRNG
1108 /* */
1109     [ERR_REMAP (ECHRNG)] = N_("Channel number out of range"),
1110 # if ECHRNG > ERR_MAX
1111 # undef ERR_MAX
1112 # define ERR_MAX ECHRNG
1113 # endif
1114 #endif
1115 #ifdef EL2NSYNC
1116 /* */
1117     [ERR_REMAP (EL2NSYNC)] = N_("Level 2 not synchronized"),
1118 # if EL2NSYNC > ERR_MAX
1119 # undef ERR_MAX
1120 # define ERR_MAX EL2NSYNC
1121 # endif
1122 #endif
1123 #ifdef EL3HLT
1124 /* */
1125     [ERR_REMAP (EL3HLT)] = N_("Level 3 halted"),
1126 # if EL3HLT > ERR_MAX
1127 # undef ERR_MAX
1128 # define ERR_MAX EL3HLT
1129 # endif
1130 #endif
1131 #ifdef EL3RST
1132 /* */
1133     [ERR_REMAP (EL3RST)] = N_("Level 3 reset"),
1134 # if EL3RST > ERR_MAX
1135 # undef ERR_MAX
1136 # define ERR_MAX EL3RST
1137 # endif
1138 #endif
1139 #ifdef ELNRNG
1140 /* */
1141     [ERR_REMAP (ELNRNG)] = N_("Link number out of range"),
1142 # if ELNRNG > ERR_MAX
1143 # undef ERR_MAX
1144 # define ERR_MAX ELNRNG
1145 # endif
1146 #endif
1147 #ifdef EUNATCH
1148 /* */
1149     [ERR_REMAP (EUNATCH)] = N_("Protocol driver not attached"),
1150 # if EUNATCH > ERR_MAX
1151 # undef ERR_MAX
1152 # define ERR_MAX EUNATCH
1153 # endif
1154 #endif
1155 #ifdef ENOCSI
1156 /* */
1157     [ERR_REMAP (ENOCSI)] = N_("No CSI structure available"),
1158 # if ENOCSI > ERR_MAX
1159 # undef ERR_MAX
1160 # define ERR_MAX ENOCSI
1161 # endif
1162 #endif
1163 #ifdef EL2HLT
1164 /* */
1165     [ERR_REMAP (EL2HLT)] = N_("Level 2 halted"),
1166 # if EL2HLT > ERR_MAX
1167 # undef ERR_MAX
1168 # define ERR_MAX EL2HLT
1169 # endif
1170 #endif
1171 #ifdef EBADE
1172 /* */
1173     [ERR_REMAP (EBADE)] = N_("Invalid exchange"),
1174 # if EBADE > ERR_MAX
1175 # undef ERR_MAX
1176 # define ERR_MAX EBADE
1177 # endif
1178 #endif
1179 #ifdef EBADR
1180 /* */
1181     [ERR_REMAP (EBADR)] = N_("Invalid request descriptor"),
1182 # if EBADR > ERR_MAX
1183 # undef ERR_MAX
1184 # define ERR_MAX EBADR
1185 # endif
1186 #endif
1187 #ifdef EXFULL
1188 /* */
1189     [ERR_REMAP (EXFULL)] = N_("Exchange full"),
1190 # if EXFULL > ERR_MAX
1191 # undef ERR_MAX
1192 # define ERR_MAX EXFULL
1193 # endif
1194 #endif
1195 #ifdef ENOANO
1196 /* */
1197     [ERR_REMAP (ENOANO)] = N_("No anode"),
1198 # if ENOANO > ERR_MAX
1199 # undef ERR_MAX
1200 # define ERR_MAX ENOANO
1201 # endif
1202 #endif
1203 #ifdef EBADRQC
1204 /* */
1205     [ERR_REMAP (EBADRQC)] = N_("Invalid request code"),
1206 # if EBADRQC > ERR_MAX
1207 # undef ERR_MAX
1208 # define ERR_MAX EBADRQC
1209 # endif
1210 #endif
1211 #ifdef EBADSLT
1212 /* */
1213     [ERR_REMAP (EBADSLT)] = N_("Invalid slot"),
1214 # if EBADSLT > ERR_MAX
1215 # undef ERR_MAX
1216 # define ERR_MAX EBADSLT
1217 # endif
1218 #endif
1219 #if defined (EDEADLOCK) && EDEADLOCK != EDEADLK
1220 /* */
1221     [ERR_REMAP (EDEADLOCK)] = N_("File locking deadlock error"),
1222 # if EDEADLOCK > ERR_MAX
1223 # undef ERR_MAX
1224 # define ERR_MAX EDEADLOCK
1225 # endif
1226 #endif
1227 #ifdef EBFONT
1228 /* */
1229     [ERR_REMAP (EBFONT)] = N_("Bad font file format"),
1230 # if EBFONT > ERR_MAX
1231 # undef ERR_MAX
1232 # define ERR_MAX EBFONT
1233 # endif
1234 #endif
1235 #ifdef ENONET
1236 /* */
1237     [ERR_REMAP (ENONET)] = N_("Machine is not on the network"),
1238 # if ENONET > ERR_MAX
1239 # undef ERR_MAX
1240 # define ERR_MAX ENONET
1241 # endif
1242 #endif
1243 #ifdef ENOPKG
1244 /* */
1245     [ERR_REMAP (ENOPKG)] = N_("Package not installed"),
1246 # if ENOPKG > ERR_MAX
1247 # undef ERR_MAX
1248 # define ERR_MAX ENOPKG
1249 # endif
1250 #endif
1251 #ifdef EADV
1252 /* */
1253     [ERR_REMAP (EADV)] = N_("Advertise error"),
1254 # if EADV > ERR_MAX
1255 # undef ERR_MAX
1256 # define ERR_MAX EADV
1257 # endif
1258 #endif
1259 #ifdef ESRMNT
1260 /* */
1261     [ERR_REMAP (ESRMNT)] = N_("Srmount error"),
1262 # if ESRMNT > ERR_MAX
1263 # undef ERR_MAX
1264 # define ERR_MAX ESRMNT
1265 # endif
1266 #endif
1267 #ifdef ECOMM
1268 /* */
1269     [ERR_REMAP (ECOMM)] = N_("Communication error on send"),
1270 # if ECOMM > ERR_MAX
1271 # undef ERR_MAX
1272 # define ERR_MAX ECOMM
1273 # endif
1274 #endif
1275 #ifdef EDOTDOT
1276 /* */
1277     [ERR_REMAP (EDOTDOT)] = N_("RFS specific error"),
1278 # if EDOTDOT > ERR_MAX
1279 # undef ERR_MAX
1280 # define ERR_MAX EDOTDOT
1281 # endif
1282 #endif
1283 #ifdef ENOTUNIQ
1284 /* */
1285     [ERR_REMAP (ENOTUNIQ)] = N_("Name not unique on network"),
1286 # if ENOTUNIQ > ERR_MAX
1287 # undef ERR_MAX
1288 # define ERR_MAX ENOTUNIQ
1289 # endif
1290 #endif
1291 #ifdef EBADFD
1292 /* */
1293     [ERR_REMAP (EBADFD)] = N_("File descriptor in bad state"),
1294 # if EBADFD > ERR_MAX
1295 # undef ERR_MAX
1296 # define ERR_MAX EBADFD
1297 # endif
1298 #endif
1299 #ifdef EREMCHG
1300 /* */
1301     [ERR_REMAP (EREMCHG)] = N_("Remote address changed"),
1302 # if EREMCHG > ERR_MAX
1303 # undef ERR_MAX
1304 # define ERR_MAX EREMCHG
1305 # endif
1306 #endif
1307 #ifdef ELIBACC
1308 /* */
1309     [ERR_REMAP (ELIBACC)] = N_("Can not access a needed shared library"),
1310 # if ELIBACC > ERR_MAX
1311 # undef ERR_MAX
1312 # define ERR_MAX ELIBACC
1313 # endif
1314 #endif
1315 #ifdef ELIBBAD
1316 /* */
1317     [ERR_REMAP (ELIBBAD)] = N_("Accessing a corrupted shared library"),
1318 # if ELIBBAD > ERR_MAX
1319 # undef ERR_MAX
1320 # define ERR_MAX ELIBBAD
1321 # endif
1322 #endif
1323 #ifdef ELIBSCN
1324 /* */
1325     [ERR_REMAP (ELIBSCN)] = N_(".lib section in a.out corrupted"),
1326 # if ELIBSCN > ERR_MAX
1327 # undef ERR_MAX
1328 # define ERR_MAX ELIBSCN
1329 # endif
1330 #endif
1331 #ifdef ELIBMAX
1332 /* */
1333     [ERR_REMAP (ELIBMAX)] = N_("Attempting to link in too many shared libraries"),
1334 # if ELIBMAX > ERR_MAX
1335 # undef ERR_MAX
1336 # define ERR_MAX ELIBMAX
1337 # endif
1338 #endif
1339 #ifdef ELIBEXEC
1340 /* */
1341     [ERR_REMAP (ELIBEXEC)] = N_("Cannot exec a shared library directly"),
1342 # if ELIBEXEC > ERR_MAX
1343 # undef ERR_MAX
1344 # define ERR_MAX ELIBEXEC
1345 # endif
1346 #endif
1347 #ifdef ESTRPIPE
1348 /* */
1349     [ERR_REMAP (ESTRPIPE)] = N_("Streams pipe error"),
1350 # if ESTRPIPE > ERR_MAX
1351 # undef ERR_MAX
1352 # define ERR_MAX ESTRPIPE
1353 # endif
1354 #endif
1355 #ifdef EUCLEAN
1356 /* */
1357     [ERR_REMAP (EUCLEAN)] = N_("Structure needs cleaning"),
1358 # if EUCLEAN > ERR_MAX
1359 # undef ERR_MAX
1360 # define ERR_MAX EUCLEAN
1361 # endif
1362 #endif
1363 #ifdef ENOTNAM
1364 /* */
1365     [ERR_REMAP (ENOTNAM)] = N_("Not a XENIX named type file"),
1366 # if ENOTNAM > ERR_MAX
1367 # undef ERR_MAX
1368 # define ERR_MAX ENOTNAM
1369 # endif
1370 #endif
1371 #ifdef ENAVAIL
1372 /* */
1373     [ERR_REMAP (ENAVAIL)] = N_("No XENIX semaphores available"),
1374 # if ENAVAIL > ERR_MAX
1375 # undef ERR_MAX
1376 # define ERR_MAX ENAVAIL
1377 # endif
1378 #endif
1379 #ifdef EISNAM
1380 /* */
1381     [ERR_REMAP (EISNAM)] = N_("Is a named type file"),
1382 # if EISNAM > ERR_MAX
1383 # undef ERR_MAX
1384 # define ERR_MAX EISNAM
1385 # endif
1386 #endif
1387 #ifdef EREMOTEIO
1388 /* */
1389     [ERR_REMAP (EREMOTEIO)] = N_("Remote I/O error"),
1390 # if EREMOTEIO > ERR_MAX
1391 # undef ERR_MAX
1392 # define ERR_MAX EREMOTEIO
1393 # endif
1394 #endif
1395 #ifdef ENOMEDIUM
1396 /* */
1397     [ERR_REMAP (ENOMEDIUM)] = N_("No medium found"),
1398 # if ENOMEDIUM > ERR_MAX
1399 # undef ERR_MAX
1400 # define ERR_MAX ENOMEDIUM
1401 # endif
1402 #endif
1403 #ifdef EMEDIUMTYPE
1404 /* */
1405     [ERR_REMAP (EMEDIUMTYPE)] = N_("Wrong medium type"),
1406 # if EMEDIUMTYPE > ERR_MAX
1407 # undef ERR_MAX
1408 # define ERR_MAX EMEDIUMTYPE
1409 # endif
1410 #endif
1411 #ifdef ENOKEY
1412 /* */
1413     [ERR_REMAP (ENOKEY)] = N_("Required key not available"),
1414 # if ENOKEY > ERR_MAX
1415 # undef ERR_MAX
1416 # define ERR_MAX ENOKEY
1417 # endif
1418 #endif
1419 #ifdef EKEYEXPIRED
1420 /* */
1421     [ERR_REMAP (EKEYEXPIRED)] = N_("Key has expired"),
1422 # if EKEYEXPIRED > ERR_MAX
1423 # undef ERR_MAX
1424 # define ERR_MAX EKEYEXPIRED
1425 # endif
1426 #endif
1427 #ifdef EKEYREVOKED
1428 /* */
1429     [ERR_REMAP (EKEYREVOKED)] = N_("Key has been revoked"),
1430 # if EKEYREVOKED > ERR_MAX
1431 # undef ERR_MAX
1432 # define ERR_MAX EKEYREVOKED
1433 # endif
1434 #endif
1435 #ifdef EKEYREJECTED
1436 /* */
1437     [ERR_REMAP (EKEYREJECTED)] = N_("Key was rejected by service"),
1438 # if EKEYREJECTED > ERR_MAX
1439 # undef ERR_MAX
1440 # define ERR_MAX EKEYREJECTED
1441 # endif
1442 #endif
1443 #ifdef EOWNERDEAD
1444 /* */
1445     [ERR_REMAP (EOWNERDEAD)] = N_("Owner died"),
1446 # if EOWNERDEAD > ERR_MAX
1447 # undef ERR_MAX
1448 # define ERR_MAX EOWNERDEAD
1449 # endif
1450 #endif
1451 #ifdef ENOTRECOVERABLE
1452 /* */
1453     [ERR_REMAP (ENOTRECOVERABLE)] = N_("State not recoverable"),
1454 # if ENOTRECOVERABLE > ERR_MAX
1455 # undef ERR_MAX
1456 # define ERR_MAX ENOTRECOVERABLE
1457 # endif
1458 #endif
1459   };
1460
1461 #define NERR \
1462   (sizeof _sys_errlist_internal / sizeof _sys_errlist_internal [0])
1463 const int _sys_nerr_internal = NERR;
1464
1465 #if !defined NOT_IN_libc && !ERRLIST_NO_COMPAT
1466 # include <errlist-compat.c>
1467 #endif
1468
1469 #ifdef EMIT_ERR_MAX
1470 void dummy (void)
1471 { asm volatile (" @@@ %0 @@@ " : : "i" (ERR_REMAP (ERR_MAX))); }
1472 #endif