Regenerated

[glibc/history.git] / INSTALL

Installing the GNU C Library
****************************

   Before you do anything else, you should read the file `FAQ' found at
the top level of the source tree.  This file answers common questions
and describes problems you may experience with compilation and
installation.  It is updated more frequently than this manual.

   Features can be added to GNU Libc via "add-on" bundles.  These are
separate tarfiles which you unpack into the top level of the source
tree.  Then you give `configure' the `--enable-add-ons' option to
activate them, and they will be compiled into the library.  As of the
2.1 release, two important components of glibc are distributed as
"official" add-ons.  Unless you are doing an unusual installation, you
should get them both.

   Support for POSIX threads is maintained by someone else, so it's in a
separate package.  It is only available for Linux systems, but this will
change in the future.  Get it from the same place you got the main
bundle; the file is `glibc-linuxthreads-VERSION.tar.gz'.  Support for
the `crypt' function is distributed separately because of United States
export restrictions.  If you are outside the US or Canada, you must get
`crypt' support from a site outside the US, such as `ftp.gwdg.de'.
`ftp.gwdg.de' has the crypt distribution in `pub/linux/glibc'.  (Most
non-US mirrors of `ftp.gnu.org' will have it too.)  The file you need
is `glibc-crypt-VERSION.tar.gz'.

   You will need recent versions of several GNU tools: definitely GCC
and GNU Make, and possibly others.  *Note Tools for Compilation::,
below.

Configuring and compiling GNU Libc
==================================

   GNU libc can be compiled in the source directory, but we strongly
advise to build it in a separate build directory.  For example, if you
have unpacked the glibc sources in `/src/gnu/glibc-2.1.0', create a
directory `/src/gnu/glibc-build' to put the object files in.  This
allows to remove the whole build directory in case an error occurs
which is the safest way to get a clean way and should always be done.

   From your object directory, run the shell script `configure' found
at the top level of the source tree.  In the scenario above, you'd type

     $ ../glibc-2.1.0/configure ARGS...

   Please note that even if you're building in a separate build
directory, the compilation needs to modify a few files in the source
directory, especially some files in the manual subdirectory.

`configure' takes many options, but you can get away with knowing only
two: `--prefix' and `--enable-add-ons'.  The `--prefix' option tells
configure where you want glibc installed.  This defaults to
`/usr/local'.  The `--enable-add-ons' option tells configure to use all
the add-on bundles it finds in the source directory.  Since important
functionality is provided in add-ons, you should always specify this
option.

   It may also be useful to set the CC and CFLAGS variables in the
environment when running `configure'.  CC selects the C compiler that
will be used, and CFLAGS sets optimization options for the compiler.

   The following list describes all of the available options for
`configure':

`--prefix=DIRECTORY'
     Install machine-independent data files in subdirectories of
     `DIRECTORY'.  The default is to install in `/usr/local'.

`--exec-prefix=DIRECTORY'
     Install the library and other machine-dependent files in
     subdirectories of `DIRECTORY'.  The default is to the `--prefix'
     directory if that option is specified, or `/usr/local' otherwise.

`--with-headers=DIRECTORY'
     Look for kernel header files in DIRECTORY, not `/usr/include'.
     Glibc needs information from the kernel's private header files.
     It will normally look in `/usr/include' for them, but if you
     specify this option, it will look in DIRECTORY instead.

     This option is primarily of use on a system where the headers in
     `/usr/include' come from an older version of glibc.  Conflicts can
     occasionally happen in this case.  Note that Linux libc5 qualifies
     as an older version of glibc.  You can also use this option if you
     want to compile glibc with a newer set of kernel headers than the
     ones found in `/usr/include'.

`--enable-add-ons[=LIST]'
     Enable add-on packages in your source tree.  If this option is
     specified with no list, it enables all the add-on packages it
     finds.  If you do not wish to use some add-on package that you
     have present in your source tree, give this option a list of the
     add-ons that you _do_ want used, like this:
     `--enable-add-ons=crypt,linuxthreads'

`--with-binutils=DIRECTORY'
     Use the binutils (assembler and linker) in `DIRECTORY', not the
     ones the C compiler would default to.  You could use this option if
     the default binutils on your system cannot deal with all the
     constructs in the GNU C library.  In that case, `configure' will
     detect the problem and suppress these constructs, so that the
     library will still be usable, but functionality may be lost--for
     example, you can't build a shared libc with old binutils.

`--without-fp'
     Use this option if your computer lacks hardware floating-point
     support and your operating system does not emulate an FPU.

`--disable-shared'
     Don't build shared libraries even if it is possible.  Not all
     systems support shared libraries; you need ELF support and
     (currently) the GNU linker.

`--disable-profile'
     Don't build libraries with profiling information.  You may want to
     use this option if you don't plan to do profiling.

`--enable-omitfp'
     Use maximum optimization for the normal (static and shared)
     libraries, and compile separate static libraries with debugging
     information and no optimisation.  We recommend against this.  The
     extra optimization doesn't gain you much, it may provoke compiler
     bugs, and you won't be able to trace bugs through the C library.

`--disable-versioning'
     Don't compile the shared libraries with symbol version information.
     Doing this will make the resulting library incompatible with old
     binaries, so it's not recommended.

`--enable-static-nss'
     Compile static versions of the NSS (Name Service Switch) libraries.
     This is not recommended because it defeats the purpose of NSS; a
     program linked statically with the NSS libraries cannot be
     dynamically reconfigured to use a different name database.

`--build=BUILD-SYSTEM'
`--host=HOST-SYSTEM'
     These options are for cross-compiling.  If you specify both
     options and BUILD-SYSTEM is different from HOST-SYSTEM, `configure'
     will prepare to cross-compile glibc from BUILD-SYSTEM to be used
     on HOST-SYSTEM.  You'll probably need the `--with-headers' option
     too, and you may have to override CONFIGURE's selection of the
     compiler and/or binutils.

     If you only specify `--host', configure will prepare for a native
     compile but use what you specify instead of guessing what your
     system is.  This is most useful to change the CPU submodel.  For
     example, if configure guesses your machine as `i586-pc-linux-gnu'
     but you want to compile a library for 386es, give
     `--host=i386-pc-linux-gnu' or just `--host=i386-linux' and add the
     appropriate compiler flags (`-mcpu=i386' will do the trick) to
     CFLAGS.

     If you specify just `--build', configure will get confused.

   To build the library and related programs, type `make'.  This will
produce a lot of output, some of which may look like errors from `make'
but isn't.  Look for error messages from `make' containing `***'.
Those indicate that something is really wrong.

   The compilation process takes several hours even on fast hardware.
Expect at least two hours for the default configuration on i586 for
Linux.  For Hurd times are much longer.  Except for EGCS 1.1 and GCC
2.95 (and later versions of GCC), all supported versions of GCC have a
problem which causes them to take several minutes to compile certain
files in the iconvdata directory.  Do not panic if the compiler appears
to hang.

   If you want to run a parallel make, you can't just give `make' the
`-j' option, because it won't be passed down to the sub-makes.
Instead, edit the generated `Makefile' and uncomment the line

     # PARALLELMFLAGS = -j 4

You can change the `4' to some other number as appropriate for your
system.  Instead of changing the `Makefile', you could give this option
directly to `make' and call it as, for example, `make
PARALLELMFLAGS=-j4'.  If you're building in the source directory, you
must use the latter approach since in this case no new `Makefile' is
generated for you to change.

   To build and run test programs which exercise some of the library
facilities, type `make check'.  If it does not complete successfully,
do not use the built library, and report a bug after verifying that the
problem is not already known.  *Note Reporting Bugs::, for instructions
on reporting bugs.  Note that some of the tests assume they are not
being run by `root'.  We recommend you compile and test glibc as an
unprivileged user.

   To format the `GNU C Library Reference Manual' for printing, type
`make dvi'.  You need a working TeX installation to do this.  The
distribution already includes the on-line formatted version of the
manual, as Info files.  You can regenerate those with `make info', but
it shouldn't be necessary.

Installing the C Library
========================

   To install the library and its header files, and the Info files of
the manual, type `make install'.  This will build things if necessary,
before installing them.  However, you should still compile everything
first.  If you are installing glibc as your primary C library, we
recommend that you shut the system down to single-user mode first, and
reboot afterward.  This minimizes the risk of breaking things when the
library changes out from underneath.

   If you are upgrading from a previous installation of glibc 2.0 or
2.1, `make install' will do the entire job.  If you're upgrading from
Linux libc5 or some other C library, you need to rename the old
`/usr/include' directory before running `make install', or you will end
up with a mixture of header files from both libraries, and you won't be
able to compile anything.  You may also need to reconfigure GCC to work
with the new library.  The easiest way to do that is to figure out the
compiler switches to make it work again
(`-Wl,--dynamic-linker=/lib/ld-linux.so.2' should work on Linux
systems) and use them to recompile gcc.  You can also edit the specs
file (`/usr/lib/gcc-lib/TARGET/VERSION/specs'), but that is a bit of a
black art.

   You can install glibc somewhere other than where you configured it
to go by setting the `install_root' variable on the command line for
`make install'.  The value of this variable is prepended to all the
paths for installation.  This is useful when setting up a chroot
environment or preparing a binary distribution.

   Glibc 2.1 includes two daemons, `nscd' and `utmpd', which you may or
may not want to run.  `nscd' caches name service lookups; it can
dramatically improve performance with NIS+, and may help with DNS as
well.  `utmpd' allows programs that use the old format for the `utmp'
file to coexist with new programs.  For more information see the file
`login/README.utmpd'.

   One auxiliary program, `/usr/libexec/pt_chown', is installed setuid
`root'.  This program is invoked by the `grantpt' function; it sets the
permissions on a pseudoterminal so it can be used by the calling
process.  This means programs like `xterm' and `screen' do not have to
be setuid to get a pty.  (There may be other reasons why they need
privileges.)  If you are using a 2.1 or newer Linux kernel with the
`devptsfs' or `devfs' filesystems providing pty slaves, you don't need
this program; otherwise you do.  The source for `pt_chown' is in
`login/programs/pt_chown.c'.

   After installation you might want to configure the timezone and
locale installation of your system.  The GNU C library comes with a
locale database which gets configured with `localedef'.  For example, to
set up a German locale with name `de_DE', simply issue the command
`localedef -i de_DE -f ISO-8859-1 de_DE'.  To configure all locales
that are supported by glibc, you can issue from your build directory the
command `make localedata/install-locales'.

   To configure the locally used timezone, you can either set the `TZ'
environment variable.  The script `tzselect' helps you to select the
right value.  As an example for Germany, tzselect would tell you to use
`TZ='Europe/Berlin''.  For a system wide installation (the given paths
are for an installation with `--prefix=/usr'), link the timezone file
which is in `/usr/share/zoneinfo' to the file `/etc/localtime'.  For
Germany, you might execute `ln -s /usr/share/zoneinfo/Europe/Berlin
/etc/localtime'.

Recommended Tools for Compilation
=================================

   We recommend installing the following GNU tools before attempting to
build the GNU C library:

   * GNU `make' 3.75

     You need the latest version of GNU `make'.  Modifying the GNU C
     Library to work with other `make' programs would be so difficult
     that we recommend you port GNU `make' instead.  *Really.*  We
     recommend version GNU `make' version 3.75 or 3.77.  All earlier
     versions have severe bugs or lack features. Version 3.76 is known
     to have bugs which only show up in big projects like GNU `libc'.
     Version 3.76.1 seems OK but some people have reported problems.

   * EGCS 1.1.1, 1.1 or 1.0.3, or GCC 2.8.1, 2.95, 2.95.1

     The GNU C library can only be compiled with the GNU C compiler
     family.  As of the 2.1 release, EGCS 1.0.3 or higher is required.
     GCC 2.8.1 can also be used (but see the FAQ for reasons why you
     might not want to).  Earlier versions simply are too buggy.  As of
     this writing, GCC 2.95.1 is the compiler we advise to use.

     You can use whatever compiler you like to compile programs that
     use GNU libc, but be aware that both GCC 2.7 and 2.8 have bugs in
     their floating-point support that may be triggered by the math
     library.

     On Alpha machines you need at least EGCS 1.1.1.  Earlier versions
     don't work reliably.

     For PPC you might need some patches even on top of the last EGCS
     version.  See the FAQ.

   * GNU `binutils' 2.9.1, 2.9.1.0.16, or later 2.9.1.0.x release

     You must use GNU binutils (as and ld) if you want to build a shared
     library.  Even if you don't, we recommend you use them anyway.  No
     one has tested compilation with non-GNU binutils in a long time.

     The quality of binutils releases has varied a bit recently.  The
     bugs are in obscure features, but glibc uses quite a few of those.
     2.9.1, 2.9.1.0.16, and later 2.9.1.0.x releases are known to
     work.  Versions after 2.8.1.0.23 may or may not work.  Older
     versions definitely don't.  2.9.1.0.16 or higher is required on
     some platforms, like PPC and Arm.

     For PPC you might need some patches even on top of the last
     binutils version.  See the FAQ.

   * GNU `texinfo' 3.12f

     To correctly translate and install the Texinfo documentation you
     need this version of the `texinfo' package.  Earlier versions do
     not understand all the tags used in the document, and the
     installation mechanism for the info files is not present or works
     differently.

   * GNU `awk' 3.0, or some other POSIX awk

     Awk is used in several places to generate files.  The scripts
     should work with any POSIX-compliant awk implementation; `gawk'
     3.0 and `mawk' 1.3 are known to work.

   * Perl 5

     Perl is not required, but it is used if present to test the
     installation.  We may decide to use it elsewhere in the future.


If you change any of the `configure.in' files you will also need

   * GNU `autoconf' 2.12 or higher

and if you change any of the message translation files you will need

   * GNU `gettext' 0.10.35 or later (version 0.10.35 is a alpha release
     and available via ftp from alpha.gnu.org/gnu)

You may also need these packages if you upgrade your source tree using
patches, although we try to avoid this.

Supported Configurations
========================

   The GNU C Library currently supports configurations that match the
following patterns:

     alpha-*-linux
     arm-*-linux
     arm-*-linuxaout
     arm-*-none
     iX86-*-gnu
     iX86-*-linux
     m68k-*-linux
     powerpc-*-linux
     sparc-*-linux
     sparc64-*-linux

   Former releases of this library (version 1.09.1 and perhaps earlier
versions) used to run on the following configurations:

     alpha-dec-osf1
     alpha-*-linuxecoff
     iX86-*-bsd4.3
     iX86-*-isc2.2
     iX86-*-isc3.N
     iX86-*-sco3.2
     iX86-*-sco3.2v4
     iX86-*-sysv
     iX86-*-sysv4
     iX86-force_cpu386-none
     iX86-sequent-bsd
     i960-nindy960-none
     m68k-hp-bsd4.3
     m68k-mvme135-none
     m68k-mvme136-none
     m68k-sony-newsos3
     m68k-sony-newsos4
     m68k-sun-sunos4.N
     mips-dec-ultrix4.N
     mips-sgi-irix4.N
     sparc-sun-solaris2.N
     sparc-sun-sunos4.N

   Since no one has volunteered to test and fix these configurations,
they are not supported at the moment.  They probably don't compile;
they definitely don't work anymore.  Porting the library is not hard.
If you are interested in doing a port, please contact the glibc
maintainers by sending electronic mail to <bug-glibc@gnu.org>.

   Valid cases of `iX86' include `i386', `i486', `i586', and `i686'.
All of those configurations produce a library that can run on this
processor and newer processors.  The GCC compiler by default generates
code that's optimized for the machine it's configured for and will use
the instructions available on that machine.  For example if your GCC is
configured for `i686', gcc will optimize for `i686' and might issue
some `i686' specific instructions.  To generate code for other models,
you have to configure for that model and give GCC the appropriate
`-march=' and `-mcpu=' compiler switches via CFLAGS.

Specific advice for Linux systems
=================================

   If you are installing GNU libc on a Linux system, you need to have
the header files from a 2.2 kernel around for reference.  You do not
need to use the 2.2 kernel, just have its headers where glibc can access
at them.  The easiest way to do this is to unpack it in a directory
such as `/usr/src/linux-2.2.1'.  In that directory, run `make config'
and accept all the defaults.  Then run `make include/linux/version.h'.
Finally, configure glibc with the option
`--with-headers=/usr/src/linux-2.2.1/include'.  Use the most recent
kernel you can get your hands on.

   An alternate tactic is to unpack the 2.2 kernel and run `make
config' as above.  Then rename or delete `/usr/include', create a new
`/usr/include', and make the usual symbolic links of
`/usr/include/linux' and `/usr/include/asm' into the 2.2 kernel
sources.  You can then configure glibc with no special options.  This
tactic is recommended if you are upgrading from libc5, since you need
to get rid of the old header files anyway.

   Note that `/usr/include/net' and `/usr/include/scsi' should *not* be
symlinks into the kernel sources.  GNU libc provides its own versions
of these files.

   Linux expects some components of the libc installation to be in
`/lib' and some in `/usr/lib'.  This is handled automatically if you
configure glibc with `--prefix=/usr'.  If you set some other prefix or
allow it to default to `/usr/local', then all the components are
installed there.

   If you are upgrading from libc5, you need to recompile every shared
library on your system against the new library for the sake of new code,
but keep the old libraries around for old binaries to use.  This is
complicated and difficult.  Consult the Glibc2 HOWTO at
<http://www.imaxx.net/~thrytis/glibc> for details.

   You cannot use `nscd' with 2.0 kernels, due to bugs in the
kernel-side thread support.  `nscd' happens to hit these bugs
particularly hard, but you might have problems with any threaded
program.

Reporting Bugs
==============

   There are probably bugs in the GNU C library.  There are certainly
errors and omissions in this manual.  If you report them, they will get
fixed.  If you don't, no one will ever know about them and they will
remain unfixed for all eternity, if not longer.

   It is a good idea to verify that the problem has not already been
reported.  Bugs are documented in two places: The file `BUGS' describes
a number of well known bugs and the bug tracking system has a WWW
interface at <http://www-gnats.gnu.org:8080/cgi-bin/wwwgnats.pl>.  The
WWW interface gives you access to open and closed reports.  The closed
reports normally include a patch or a hint on solving the problem.

   To report a bug, first you must find it.  Hopefully, this will be the
hard part.  Once you've found a bug, make sure it's really a bug.  A
good way to do this is to see if the GNU C library behaves the same way
some other C library does.  If so, probably you are wrong and the
libraries are right (but not necessarily).  If not, one of the libraries
is probably wrong.  It might not be the GNU library.  Many historical
Unix C libraries permit things that we don't, such as closing a file
twice.

   If you think you have found some way in which the GNU C library does
not conform to the ISO and POSIX standards (*note Standards and
Portability::.), that is definitely a bug.  Report it!

   Once you're sure you've found a bug, try to narrow it down to the
smallest test case that reproduces the problem.  In the case of a C
library, you really only need to narrow it down to one library function
call, if possible.  This should not be too difficult.

   The final step when you have a simple test case is to report the bug.
Do this using the `glibcbug' script.  It is installed with libc, or if
you haven't installed it, will be in your build directory.  Send your
test case, the results you got, the results you expected, and what you
think the problem might be (if you've thought of anything).  `glibcbug'
will insert the configuration information we need to see, and ship the
report off to <bugs@gnu.org>.  Don't send a message there directly; it
is fed to a program that expects mail to be formatted in a particular
way.  Use the script.

   If you are not sure how a function should behave, and this manual
doesn't tell you, that's a bug in the manual.  Report that too!  If the
function's behavior disagrees with the manual, then either the library
or the manual has a bug, so report the disagreement.  If you find any
errors or omissions in this manual, please report them to the Internet
address <bug-glibc-manual@gnu.org>.  If you refer to specific sections
of the manual, please include the section names for easier
identification.