portable: remove portably-defined headers

[got-portable.git] / cvg / cvg.1

.\"
.\" Copyright (c) 2017 Martin Pieuchot
.\" Copyright (c) 2018, 2019, 2020 Stefan Sperling
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" copyright notice and this permission notice appear in all copies.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
.Dd $Mdocdate$
.Dt CVG 1
.Os
.Sh NAME
.Nm cvg
.Nd CVS-like Git client
.Sh SYNOPSIS
.Nm
.Op Fl hV
.Ar command
.Op Ar arg ...
.Sh DESCRIPTION
.Nm
is a Git-compatible version control system with a user interface
similar to
.Xr cvs 1 .
.Pp
.Nm
supports local and remote Git repositories.
The Git repository format is described in
.Xr git-repository 5 .
.Pp
Files managed by
.Nm
must be checked out from the repository for modification.
Checked out files are stored in a
.Em work tree
which can be placed at an arbitrary directory in the filesystem hierarchy.
The on-disk format of this work tree is described in
.Xr cvg-worktree 5 .
.Pp
.Nm
provides global and command-specific options.
Global options must precede the command name, and are as follows:
.Bl -tag -width tenletters
.It Fl h
Display usage information and exit immediately.
.It Fl V , -version
Display program version and exit immediately.
.El
.Pp
The commands for
.Nm
are as follows:
.Bl -tag -width checkout
.Tg im
.It Xo
.Cm import
.Op Fl b Ar branch
.Op Fl I Ar pattern
.Op Fl m Ar message
.Op Fl r Ar repository-path
.Ar directory
.Xc
.Dl Pq alias: Cm im
Create an initial commit in a repository from the file hierarchy
within the specified
.Ar directory .
The created commit will not have any parent commits, i.e. it will be a
root commit.
Also create a new reference which provides a branch name for the newly
created commit.
Show the path of each imported file to indicate progress.
.Pp
The
.Cm got import
command requires the
.Ev GOT_AUTHOR
environment variable to be set,
unless an author has been configured in
.Xr got.conf 5
or Git's
.Dv user.name
and
.Dv user.email
configuration settings can be obtained from the repository's
.Pa .git/config
file or from Git's global
.Pa ~/.gitconfig
configuration file.
.Pp
The options for
.Cm got import
are as follows:
.Bl -tag -width Ds
.It Fl b Ar branch
Create the specified
.Ar branch .
If this option is not specified, a branch corresponding to the repository's
HEAD reference will be used.
Use of this option is required if the branch resolved via the repository's
HEAD reference already exists.
.It Fl I Ar pattern
Ignore files or directories with a name which matches the specified
.Ar pattern .
This option may be specified multiple times to build a list of ignore patterns.
The
.Ar pattern
follows the globbing rules documented in
.Xr glob 7 .
Ignore patterns which end with a slash,
.Dq / ,
will only match directories.
.It Fl m Ar message
Use the specified log message when creating the new commit.
Without the
.Fl m
option,
.Cm got import
opens a temporary file in an editor where a log message can be written.
Quitting the editor without saving the file will abort the import operation.
.It Fl r Ar repository-path
Use the repository at the specified path.
If not specified, assume the repository is located at or above the current
working directory.
.El
.Tg cl
.It Xo
.Cm clone
.Op Fl almqv
.Op Fl b Ar branch
.Op Fl R Ar reference
.Ar repository-URL
.Op Ar directory
.Xc
.Dl Pq alias: Cm cl
Clone a Git repository at the specified
.Ar repository-URL
into the specified
.Ar directory .
If no
.Ar directory
is specified, the directory name will be derived from the name of the
cloned repository.
.Cm got clone
will refuse to run if the
.Ar directory
already exists.
.Pp
The
.Ar repository-URL
specifies a protocol scheme, a server hostname, an optional port number
separated from the hostname by a colon, and a path to the repository on
the server:
.Lk scheme://hostname:port/path/to/repository
.Pp
The following protocol schemes are supported:
.Bl -tag -width git+ssh
.It git
The Git protocol as implemented by the
.Xr git-daemon 1
server.
Use of this protocol is discouraged since it supports neither authentication
nor encryption.
.It git+ssh
The Git protocol wrapped in an authenticated and encrypted
.Xr ssh 1
tunnel.
With this protocol the hostname may contain an embedded username for
.Xr ssh 1
to use:
.Mt user@hostname
.It ssh
Short alias for git+ssh.
.El
.Pp
Objects in the cloned repository are stored in a pack file which is downloaded
from the server.
This pack file will then be indexed to facilitate access to the objects stored
within.
If any objects in the pack file are stored in deltified form, all deltas will
be fully resolved in order to compute the ID of such objects.
This can take some time.
More details about the pack file format are documented in
.Xr git-repository 5 .
.Pp
.Cm got clone
creates a remote repository entry in the
.Xr got.conf 5
and
.Pa config
files of the cloned repository to store the
.Ar repository-url
and any
.Ar branch
or
.Ar reference
arguments for future use by
.Cm got fetch
or
.Xr git-fetch 1 .
.Pp
The options for
.Cm got clone
are as follows:
.Bl -tag -width Ds
.It Fl a
Fetch all branches from the remote repository's
.Dq refs/heads/
reference namespace and set
.Cm fetch_all_branches
in the cloned repository's
.Xr got.conf 5
file for future use by
.Cm got fetch .
If this option is not specified, a branch resolved via the remote
repository's HEAD reference will be fetched.
Cannot be used together with the
.Fl b
option.
.It Fl b Ar branch
Fetch the specified
.Ar branch
from the remote repository's
.Dq refs/heads/
reference namespace.
This option may be specified multiple times to build a list of branches
to fetch.
If the branch corresponding to the remote repository's HEAD reference is not
in this list, the cloned repository's HEAD reference will be set to the first
branch which was fetched.
If this option is not specified, a branch resolved via the remote
repository's HEAD reference will be fetched.
Cannot be used together with the
.Fl a
option.
.It Fl l
List branches and tags available for fetching from the remote repository
and exit immediately.
Cannot be used together with any of the other options except
.Fl q
and
.Fl v .
.It Fl m
Create the cloned repository as a mirror of the original repository.
This is useful if the cloned repository will not be used to store
locally created commits.
.Pp
The repository's
.Xr got.conf 5
and
.Pa config
files will be set up with the
.Dq mirror
option enabled, such that
.Cm got fetch
or
.Xr git-fetch 1
will write incoming changes directly to branches in the
.Dq refs/heads/
reference namespace, rather than to branches in the
.Dq refs/remotes/
namespace.
This avoids the usual requirement of having to run
.Cm got rebase
or
.Cm got merge
after
.Cm got fetch
in order to make incoming changes appear on branches in the
.Dq refs/heads/
namespace.
But maintaining custom changes in the cloned repository becomes difficult
since such changes will be at risk of being discarded whenever incoming
changes are fetched.
.It Fl q
Suppress progress reporting output.
The same option will be passed to
.Xr ssh 1
if applicable.
.It Fl R Ar reference
In addition to the branches and tags that will be fetched, fetch an arbitrary
.Ar reference
from the remote repository's
.Dq refs/
namespace.
This option may be specified multiple times to build a list of additional
references to fetch.
The specified
.Ar reference
may either be a path to a specific reference, or a reference namespace
which will cause all references in this namespace to be fetched.
.Pp
Each reference will be mapped into the cloned repository's
.Dq refs/remotes/
namespace, unless the
.Fl m
option is used to mirror references directly into the cloned repository's
.Dq refs/
namespace.
.Pp
.Cm got clone
will refuse to fetch references from the remote repository's
.Dq refs/remotes/
or
.Dq refs/got/
namespace.
.It Fl v
Verbose mode.
Causes
.Cm got clone
to print debugging messages to standard error output.
This option will be passed to
.Xr ssh 1
if applicable.
Multiple -v options increase the verbosity.
The maximum is 3.
.El
.Tg co
.It Xo
.Cm checkout
.Op Fl Eq
.Op Fl b Ar branch
.Op Fl c Ar commit
.Op Fl p Ar path-prefix
.Ar repository-path
.Op Ar work-tree-path
.Xc
.Dl Pq alias: Cm co
Copy files from a repository into a new work tree.
Show the status of each affected file, using the following status codes:
.Bl -column YXZ description
.It A Ta new file was added
.It E Ta file already exists in work tree's meta-data
.El
.Pp
If the
.Ar work tree path
is not specified, either use the last component of
.Ar repository path ,
or if a
.Ar path prefix
was specified use the last component of
.Ar path prefix .
.Pp
The options for
.Cm got checkout
are as follows:
.Bl -tag -width Ds
.It Fl b Ar branch
Check out files from a commit on the specified
.Ar branch .
If this option is not specified, a branch resolved via the repository's HEAD
reference will be used.
.It Fl c Ar commit
Check out files from the specified
.Ar commit
on the selected branch.
The expected argument is a commit ID SHA1 hash or an existing reference
or tag name which will be resolved to a commit ID.
An abbreviated hash argument will be expanded to a full SHA1 hash
automatically, provided the abbreviation is unique.
If this option is not specified, the most recent commit on the selected
branch will be used.
.Pp
If the specified
.Ar commit
is not contained in the selected branch, a different branch which contains
this commit must be specified with the
.Fl b
option.
If no such branch is known, a new branch must be created for this
commit with
.Cm got branch
before
.Cm got checkout
can be used.
Checking out work trees with an unknown branch is intentionally not supported.
.It Fl E
Proceed with the checkout operation even if the directory at
.Ar work-tree-path
is not empty.
Existing files will be left intact.
.It Fl p Ar path-prefix
Restrict the work tree to a subset of the repository's tree hierarchy.
Only files beneath the specified
.Ar path-prefix
will be checked out.
.It Fl q
Silence progress output.
.El
.Tg up
.It Xo
.Cm update
.Op Fl q
.Op Fl b Ar branch
.Op Fl c Ar commit
.Op Ar path ...
.Xc
.Dl Pq alias: Cm up
Update an existing work tree to a different
.Ar commit .
Change existing files in the work tree as necessary to match file contents
of this commit.
Preserve any local changes in the work tree and merge them with the
incoming changes.
.Pp
Files which already contain merge conflicts will not be updated to avoid
further complications.
Such files will be updated when
.Cm got update
is run again after merge conflicts have been resolved.
If the conflicting changes are no longer needed, affected files can be
reverted with
.Cm got revert
before running
.Cm got update
again.
.Pp
Show the status of each affected file, using the following status codes:
.Bl -column YXZ description
.It U Ta file was updated and contained no local changes
.It G Ta file was updated and local changes were merged cleanly
.It C Ta file was updated and conflicts occurred during merge
.It D Ta file was deleted
.It d Ta file's deletion was prevented by local modifications
.It A Ta new file was added
.It \(a~ Ta versioned file is obstructed by a non-regular file
.It ! Ta a missing versioned file was restored
.It # Ta file was not updated because it contains merge conflicts
.It ? Ta changes destined for an unversioned file were not merged
.El
.Pp
If no
.Ar path
is specified, update the entire work tree.
Otherwise, restrict the update operation to files at or within the
specified paths.
Each path is required to exist in the update operation's target commit.
Files in the work tree outside specified paths will remain unchanged and
will retain their previously recorded base commit.
Some
.Nm
commands may refuse to run while the work tree contains files from
multiple base commits.
The base commit of such a work tree can be made consistent by running
.Cm got update
across the entire work tree.
Specifying a
.Ar path
is incompatible with the
.Fl b
option.
.Pp
.Cm got update
cannot update paths with staged changes.
If changes have been staged with
.Cm got stage ,
these changes must first be committed with
.Cm got commit
or unstaged with
.Cm got unstage .
.Pp
The options for
.Cm got update
are as follows:
.Bl -tag -width Ds
.It Fl b Ar branch
Switch the work tree's branch reference to the specified
.Ar branch
before updating the work tree.
This option requires that all paths in the work tree are updated.
.Pp
As usual, any local changes in the work tree will be preserved.
This can be useful when switching to a newly created branch in order
to commit existing local changes to this branch.
.Pp
Any local changes must be dealt with separately in order to obtain a
work tree with pristine file contents corresponding exactly to the specified
.Ar branch .
Such changes could first be committed to a different branch with
.Cm got commit ,
or could be discarded with
.Cm got revert .
.It Fl c Ar commit
Update the work tree to the specified
.Ar commit .
The expected argument is a commit ID SHA1 hash or an existing reference
or tag name which will be resolved to a commit ID.
An abbreviated hash argument will be expanded to a full SHA1 hash
automatically, provided the abbreviation is unique.
If this option is not specified, the most recent commit on the work tree's
branch will be used.
.It Fl q
Silence progress output.
.El
.Tg st
.It Xo
.Cm status
.Op Fl I
.Op Fl S Ar status-codes
.Op Fl s Ar status-codes
.Op Ar path ...
.Xc
.Dl Pq alias: Cm st
Show the current modification status of files in a work tree,
using the following status codes:
.Bl -column YXZ description
.It M Ta modified file
.It A Ta file scheduled for addition in next commit
.It D Ta file scheduled for deletion in next commit
.It C Ta modified or added file which contains merge conflicts
.It ! Ta versioned file was expected on disk but is missing
.It \(a~ Ta versioned file is obstructed by a non-regular file
.It ? Ta unversioned item not tracked by
.Nm
.It m Ta modified file modes (executable bit only)
.It N Ta non-existent
.Ar path
specified on the command line
.El
.Pp
If no
.Ar path
is specified, show modifications in the entire work tree.
Otherwise, show modifications at or within the specified paths.
.Pp
If changes have been staged with
.Cm got stage ,
staged changes are shown in the second output column, using the following
status codes:
.Bl -column YXZ description
.It M Ta file modification is staged
.It A Ta file addition is staged
.It D Ta file deletion is staged
.El
.Pp
Changes created on top of staged changes are indicated in the first column:
.Bl -column YXZ description
.It MM Ta file was modified after earlier changes have been staged
.It MA Ta file was modified after having been staged for addition
.El
.Pp
The options for
.Cm got status
are as follows:
.Bl -tag -width Ds
.It Fl I
Show unversioned files even if they match an ignore pattern.
.It Fl S Ar status-codes
Suppress the output of files with a modification status matching any of the
single-character status codes contained in the
.Ar status-codes
argument.
Any combination of codes from the above list of possible status codes
may be specified.
For staged files, status codes displayed in either column will be matched.
Cannot be used together with the
.Fl s
option.
.It Fl s Ar status-codes
Only show files with a modification status matching any of the
single-character status codes contained in the
.Ar status-codes
argument.
Any combination of codes from the above list of possible status codes
may be specified.
For staged files, status codes displayed in either column will be matched.
Cannot be used together with the
.Fl S
option.
.El
.Pp
For compatibility with
.Xr cvs 1
and
.Xr git 1 ,
.Cm got status
reads
.Xr glob 7
patterns from
.Pa .cvsignore
and
.Pa .gitignore
files in each traversed directory and will not display unversioned files
which match these patterns.
Ignore patterns which end with a slash,
.Dq / ,
will only match directories.
As an extension to
.Xr glob 7
matching rules,
.Cm got status
supports consecutive asterisks,
.Dq ** ,
which will match an arbitrary amount of directories.
Unlike
.Xr cvs 1 ,
.Cm got status
only supports a single ignore pattern per line.
Unlike
.Xr git 1 ,
.Cm got status
does not support negated ignore patterns prefixed with
.Dq \&! ,
and gives no special significance to the location of path component separators,
.Dq / ,
in a pattern.
.It Xo
.Cm log
.Op Fl bdPpRs
.Op Fl C Ar number
.Op Fl c Ar commit
.Op Fl l Ar N
.Op Fl r Ar repository-path
.Op Fl S Ar search-pattern
.Op Fl x Ar commit
.Op Ar path
.Xc
Display history of a repository.
If a
.Ar path
is specified, show only commits which modified this path.
If invoked in a work tree, the
.Ar path
is interpreted relative to the current working directory,
and the work tree's path prefix is implicitly prepended.
Otherwise, the path is interpreted relative to the repository root.
.Pp
The options for
.Cm got log
are as follows:
.Bl -tag -width Ds
.It Fl b
Display individual commits which were merged into the current branch
from other branches.
By default,
.Cm got log
shows the linear history of the current branch only.
.It Fl C Ar number
Set the number of context lines shown in diffs with
.Fl p .
By default, 3 lines of context are shown.
.It Fl c Ar commit
Start traversing history at the specified
.Ar commit .
The expected argument is a commit ID SHA1 hash or an existing reference
or tag name which will be resolved to a commit ID.
An abbreviated hash argument will be expanded to a full SHA1 hash
automatically, provided the abbreviation is unique.
If this option is not specified, default to the work tree's current branch
if invoked in a work tree, or to the repository's HEAD reference.
.It Fl d
Display diffstat of changes introduced in each commit.
Cannot be used with the
.Fl s
option.
.It Fl l Ar N
Limit history traversal to a given number of commits.
If this option is not specified, a default limit value of zero is used,
which is treated as an unbounded limit.
The
.Ev GOT_LOG_DEFAULT_LIMIT
environment variable may be set to change this default value.
.It Fl P
Display the list of file paths changed in each commit, using the following
status codes:
.Bl -column YXZ description
.It M Ta modified file
.It D Ta file was deleted
.It A Ta new file was added
.It m Ta modified file modes (executable bit only)
.El
.Pp
Cannot be used with the
.Fl s
option.
.It Fl p
Display the patch of modifications made in each commit.
If a
.Ar path
is specified, only show the patch of modifications at or within this path.
Cannot be used with the
.Fl s
option.
.It Fl R
Determine a set of commits to display as usual, but display these commits
in reverse order.
.It Fl r Ar repository-path
Use the repository at the specified path.
If not specified, assume the repository is located at or above the current
working directory.
If this directory is a
.Nm
work tree, use the repository path associated with this work tree.
.It Fl S Ar search-pattern
If specified, show only commits with a log message, author name,
committer name, or ID SHA1 hash matched by the extended regular
expression
.Ar search-pattern .
Lines in committed patches will be matched if
.Fl p
is specified.
File paths changed by a commit will be matched if
.Fl P
is specified.
Regular expression syntax is documented in
.Xr re_format 7 .
.It Fl s
Display a short one-line summary of each commit, instead of the default
history format.
Cannot be used together with the
.Fl p
or
.Fl P
option.
.It Fl x Ar commit
Stop traversing commit history immediately after the specified
.Ar commit
has been traversed.
This option has no effect if the specified
.Ar commit
is never traversed.
.El
.Tg di
.It Xo
.Cm diff
.Op Fl adPsw
.Op Fl C Ar number
.Op Fl c Ar commit
.Op Fl r Ar repository-path
.Op Ar object1 Ar object2 | Ar path ...
.Xc
.Dl Pq alias: Cm di
When invoked within a work tree without any arguments, display all
local changes in the work tree.
If one or more
.Ar path
arguments are specified, only show changes within the specified paths.
.Pp
If two arguments are provided, treat each argument as a reference, a tag
name, or an object ID SHA1 hash, and display differences between the
corresponding objects.
Both objects must be of the same type (blobs, trees, or commits).
An abbreviated hash argument will be expanded to a full SHA1 hash
automatically, provided the abbreviation is unique.
If none of these interpretations produce a valid result or if the
.Fl P
option is used,
and if
.Cm got diff
is running in a work tree, attempt to interpret the two arguments as paths.
.Pp
The options for
.Cm got diff
are as follows:
.Bl -tag -width Ds
.It Fl a
Treat file contents as ASCII text even if binary data is detected.
.It Fl C Ar number
Set the number of context lines shown in the diff.
By default, 3 lines of context are shown.
.It Fl c Ar commit
Show differences between commits in the repository.
This option may be used up to two times.
When used only once, show differences between the specified
.Ar commit
and its first parent commit.
When used twice, show differences between the two specified commits.
.Pp
The expected argument is a commit ID SHA1 hash or an existing reference
or tag name which will be resolved to a commit ID.
An abbreviated hash argument will be expanded to a full SHA1 hash
automatically, provided the abbreviation is unique.
.Pp
If the
.Fl c
option is used, all non-option arguments will be interpreted as paths.
If one or more such
.Ar path
arguments are provided, only show differences for the specified paths.
.Pp
Cannot be used together with the
.Fl P
option.
.It Fl d
Display diffstat of changes before the actual diff by annotating each file path
or blob hash being diffed with the total number of lines added and removed.
A summary line will display the total number of changes across all files.
.It Fl P
Interpret all arguments as paths only.
This option can be used to resolve ambiguity in cases where paths
look like tag names, reference names, or object IDs.
This option is only valid when
.Cm got diff
is invoked in a work tree.
.It Fl r Ar repository-path
Use the repository at the specified path.
If not specified, assume the repository is located at or above the current
working directory.
If this directory is a
.Nm
work tree, use the repository path associated with this work tree.
.It Fl s
Show changes staged with
.Cm got stage
instead of showing local changes in the work tree.
This option is only valid when
.Cm got diff
is invoked in a work tree.
.It Fl w
Ignore whitespace-only changes.
.El
.Tg bl
.It Xo
.Cm blame
.Op Fl c Ar commit
.Op Fl r Ar repository-path
.Ar path
.Xc
.Dl Pq alias: Cm bl
Display line-by-line history of a file at the specified path.
.Pp
The options for
.Cm got blame
are as follows:
.Bl -tag -width Ds
.It Fl c Ar commit
Start traversing history at the specified
.Ar commit .
The expected argument is a commit ID SHA1 hash or an existing reference
or tag name which will be resolved to a commit ID.
An abbreviated hash argument will be expanded to a full SHA1 hash
automatically, provided the abbreviation is unique.
.It Fl r Ar repository-path
Use the repository at the specified path.
If not specified, assume the repository is located at or above the current
working directory.
If this directory is a
.Nm
work tree, use the repository path associated with this work tree.
.El
.Tg tr
.It Xo
.Cm tree
.Op Fl iR
.Op Fl c Ar commit
.Op Fl r Ar repository-path
.Op Ar path
.Xc
.Dl Pq alias: Cm tr
Display a listing of files and directories at the specified
directory path in the repository.
Entries shown in this listing may carry one of the following trailing
annotations:
.Bl -column YXZ description
.It @ Ta entry is a symbolic link
.It / Ta entry is a directory
.It * Ta entry is an executable file
.It $ Ta entry is a Git submodule
.El
.Pp
Symbolic link entries are also annotated with the target path of the link.
.Pp
If no
.Ar path
is specified, list the repository path corresponding to the current
directory of the work tree, or the root directory of the repository
if there is no work tree.
.Pp
The options for
.Cm got tree
are as follows:
.Bl -tag -width Ds
.It Fl c Ar commit
List files and directories as they appear in the specified
.Ar commit .
The expected argument is a commit ID SHA1 hash or an existing reference
or tag name which will be resolved to a commit ID.
An abbreviated hash argument will be expanded to a full SHA1 hash
automatically, provided the abbreviation is unique.
.It Fl i
Show object IDs of files (blob objects) and directories (tree objects).
.It Fl R
Recurse into sub-directories in the repository.
.It Fl r Ar repository-path
Use the repository at the specified path.
If not specified, assume the repository is located at or above the current
working directory.
If this directory is a
.Nm
work tree, use the repository path associated with this work tree.
.El
.It Xo
.Cm tag
.Op Fl lVv
.Op Fl c Ar commit
.Op Fl m Ar message
.Op Fl r Ar repository-path
.Op Fl s Ar signer-id
.Ar name
.Xc
Manage tags in a repository.
.Pp
Tags are managed via references which live in the
.Dq refs/tags/
reference namespace.
The
.Cm got tag
command operates on references in this namespace only.
References in this namespace point at tag objects which contain a pointer
to another object, a tag message, as well as author and timestamp information.
.Pp
Attempt to create a tag with the given
.Ar name ,
and make this tag point at the given
.Ar commit .
If no commit is specified, default to the latest commit on the work tree's
current branch if invoked in a work tree, and to a commit resolved via
the repository's HEAD reference otherwise.
.Pp
The options for
.Cm got tag
are as follows:
.Bl -tag -width Ds
.It Fl c Ar commit
Make the newly created tag reference point at the specified
.Ar commit .
The expected
.Ar commit
argument is a commit ID SHA1 hash or an existing reference or tag name which
will be resolved to a commit ID.
An abbreviated hash argument will be expanded to a full SHA1 hash
automatically, provided the abbreviation is unique.
.It Fl l
List all existing tags in the repository instead of creating a new tag.
If a
.Ar name
argument is passed, show only the tag with the given
.Ar name .
.It Fl m Ar message
Use the specified tag message when creating the new tag.
Without the
.Fl m
option,
.Cm got tag
opens a temporary file in an editor where a tag message can be written.
Quitting the editor without saving the file will abort the tag operation.
.It Fl r Ar repository-path
Use the repository at the specified path.
If not specified, assume the repository is located at or above the current
working directory.
If this directory is a
.Nm
work tree, use the repository path associated with this work tree.
.It Fl s Ar signer-id
While creating a new tag, sign this tag with the identity given in
.Ar signer-id .
.Pp
For SSH-based signatures,
.Ar signer-id
is the path to a file which may refer to either a private SSH key,
or a public SSH key with the private half available via
.Xr ssh-agent 1 .
.Cm got tag
will sign the tag object by invoking
.Xr ssh-keygen 1
with the
.Fl Y Cm sign
command, using the signature namespace
.Dq git
for compatibility with
.Xr git 1 .
.It Fl V
Verify tag object signatures.
If a
.Ar name
is specified, show and verify the tag object with the provided name.
Otherwise, list all tag objects and verify signatures where present.
.Pp
.Cm got tag
verifies SSH-based signatures by invoking
.Xr ssh-keygen 1
with the options
.Fl Y Cm verify Fl f Ar allowed_signers .
A path to the
.Ar allowed_signers
file must be set in
.Xr got.conf 5 ,
otherwise verification is impossible.
.It Fl v
Verbose mode.
During SSH signature creation and verification this option will be passed to
.Xr ssh-keygen 1 .
Multiple -v options increase the verbosity.
The maximum is 3.
.El
.Pp
By design, the
.Cm got tag
command will not delete tags or change existing tags.
If a tag must be deleted, the
.Cm got ref
command may be used to delete a tag's reference.
This should only be done if the tag has not already been copied to
another repository.
.It Xo
.Cm add
.Op Fl IR
.Ar path ...
.Xc
Schedule unversioned files in a work tree for addition to the
repository in the next commit.
By default, files which match a
.Cm got status
ignore pattern will not be added.
.Pp
If a
.Ar path
mentioned in the command line is not an unversioned file then
.Cm got add
may raise an error.
To avoid unnecessary errors from paths picked up by file globbing patterns
in the shell, paths in the argument list will be silently ignored if they
are not reported by
.Cm got status
at all, or if they are reported with one of the following status codes
and do not have changes staged via
.Cm got stage :
.Bl -column YXZ description
.It M Ta modified file
.It A Ta file scheduled for addition in next commit
.It C Ta modified or added file which contains merge conflicts
.It m Ta modified file modes (executable bit only)
.El
.Pp
The options for
.Cm got add
are as follows:
.Bl -tag -width Ds
.It Fl I
Add files even if they match a
.Cm got status
ignore pattern.
.It Fl R
Permit recursion into directories.
If this option is not specified,
.Cm got add
will refuse to run if a specified
.Ar path
is a directory.
.El
.Tg rm
.It Xo
.Cm remove
.Op Fl fkR
.Op Fl s Ar status-codes
.Ar path ...
.Xc
.Dl Pq alias: Cm rm
Remove versioned files from a work tree and schedule them for deletion
from the repository in the next commit.
.Pp
The options for
.Cm got remove
are as follows:
.Bl -tag -width Ds
.It Fl f
Perform the operation even if a file contains local modifications,
and do not raise an error if a specified
.Ar path
does not exist on disk.
.It Fl k
Keep affected files on disk.
.It Fl R
Permit recursion into directories.
If this option is not specified,
.Cm got remove
will refuse to run if a specified
.Ar path
is a directory.
.It Fl s Ar status-codes
Only delete files with a modification status matching one of the
single-character status codes contained in the
.Ar status-codes
argument.
The following status codes may be specified:
.Bl -column YXZ description
.It M Ta modified file (this implies the
.Fl f
option)
.It ! Ta versioned file expected on disk but missing
.El
.El
.Tg pa
.It Xo
.Cm patch
.Op Fl nR
.Op Fl c Ar commit
.Op Fl p Ar strip-count
.Op Ar patchfile
.Xc
.Dl Pq alias: Cm pa
Apply changes from
.Ar patchfile
to files in a work tree.
Files added or removed by a patch will be scheduled for addition or removal in
the work tree.
.Pp
The patch must be in the unified diff format as produced by
.Cm got diff ,
.Xr git-diff 1 ,
or by
.Xr diff 1
and
.Xr cvs 1
diff when invoked with their
.Fl u
options.
If no
.Ar patchfile
argument is provided, read unified diff data from standard input instead.
.Pp
If the
.Ar patchfile
contains multiple patches, then attempt to apply each of them in sequence.
.Pp
Show the status of each affected file, using the following status codes:
.Bl -column XYZ description
.It M Ta file was modified
.It G Ta file was merged using a merge-base found in the repository
.It C Ta file was merged and conflicts occurred during merge
.It D Ta file was deleted
.It A Ta file was added
.It # Ta failed to patch the file
.El
.Pp
If a change does not match at its exact line number, attempt to
apply it somewhere else in the file if a good spot can be found.
Otherwise, the patch will fail to apply.
.Pp
.Nm
.Cm patch
will refuse to apply a patch if certain preconditions are not met.
Files to be deleted must already be under version control, and must
not have been scheduled for deletion already.
Files to be added must not yet be under version control and must not
already be present on disk.
Files to be modified must already be under version control and may not
contain conflict markers.
.Pp
If an error occurs, the
.Cm patch
operation will be aborted.
Any changes made to the work tree up to this point will be left behind.
Such changes can be viewed with
.Cm got diff
and can be reverted with
.Cm got revert
if needed.
.Pp
The options for
.Cm got patch
are as follows:
.Bl -tag -width Ds
.It Fl c Ar commit
Attempt to locate files within the specified
.Ar commit
for use as a merge-base for 3-way merges.
Ideally, the specified
.Ar commit
should contain versions of files which the changes contained in the
.Ar patchfile
were based on.
Files will be located by path, relative to the repository root.
If the
.Fl p
option is used then leading path components will be stripped
before paths are looked up in the repository.
.Pp
If the
.Fl c
option is not used then
.Cm got patch
will attempt to locate merge-bases via object IDs found in
.Ar patchfile
meta-data, such as produced by
.Cm got diff
or
.Xr git-diff 1 .
Use of the
.Fl c
option is only recommended in the absence of such meta-data.
.Pp
In case no merge-base is available for a file, changes will be applied
without doing a 3-way merge.
Changes which do not apply cleanly may then be rejected entirely, rather
than producing merge conflicts in the patched target file.
.It Fl n
Do not make any modifications to the work tree.
This can be used to check whether a patch would apply without issues.
If the
.Ar patchfile
contains diffs that affect the same file multiple times, the results
displayed may be incorrect.
.It Fl p Ar strip-count
Specify the number of leading path components to strip from paths
parsed from
.Ar patchfile .
If the
.Fl p
option is not used,
.Sq a/
and
.Sq b/
path prefixes generated by
.Xr git-diff 1
will be recognized and stripped automatically.
.It Fl R
Reverse the patch before applying it.
.El
.Tg rv
.It Xo
.Cm revert
.Op Fl pR
.Op Fl F Ar response-script
.Ar path ...
.Xc
.Dl Pq alias: Cm rv
Revert any local changes in files at the specified paths in a work tree.
File contents will be overwritten with those contained in the
work tree's base commit.
There is no way to bring discarded changes back after
.Cm got revert !
.Pp
If a file was added with
.Cm got add ,
it will become an unversioned file again.
If a file was deleted with
.Cm got remove ,
it will be restored.
.Pp
The options for
.Cm got revert
are as follows:
.Bl -tag -width Ds
.It Fl F Ar response-script
With the
.Fl p
option, read
.Dq y ,
.Dq n ,
and
.Dq q
responses line-by-line from the specified
.Ar response-script
file instead of prompting interactively.
.It Fl p
Instead of reverting all changes in files, interactively select or reject
changes to revert based on
.Dq y
(revert change),
.Dq n
(keep change), and
.Dq q
(quit reverting this file) responses.
If a file is in modified status, individual patches derived from the
modified file content can be reverted.
Files in added or deleted status may only be reverted in their entirety.
.It Fl R
Permit recursion into directories.
If this option is not specified,
.Cm got revert
will refuse to run if a specified
.Ar path
is a directory.
.El
.Tg ci
.It Xo
.Cm commit
.Op Fl CNnS
.Op Fl A Ar author
.Op Fl F Ar path
.Op Fl m Ar message
.Op Ar path ...
.Xc
.Dl Pq alias: Cm ci
Create a new commit in the repository from changes in a work tree
and use this commit as the new base commit for the work tree.
If no
.Ar path
is specified, commit all changes in the work tree.
Otherwise, commit changes at or within the specified paths.
.Pp
If changes have been explicitly staged for commit with
.Cm got stage ,
only commit staged changes and reject any specified paths which
have not been staged.
.Pp
.Cm got commit
opens a temporary file in an editor where a log message can be written
unless the
.Fl m
option is used
or the
.Fl F
and
.Fl N
options are used together.
Quitting the editor without saving the file will abort the commit operation.
.Pp
Show the status of each affected file, using the following status codes:
.Bl -column YXZ description
.It M Ta modified file
.It D Ta file was deleted
.It A Ta new file was added
.It m Ta modified file modes (executable bit only)
.El
.Pp
Files which are not part of the new commit will retain their previously
recorded base commit.
Some
.Nm
commands may refuse to run while the work tree contains files from
multiple base commits.
The base commit of such a work tree can be made consistent by running
.Cm got update
across the entire work tree.
.Pp
The
.Cm got commit
command requires the
.Ev GOT_AUTHOR
environment variable to be set,
unless an author has been configured in
.Xr got.conf 5
or Git's
.Dv user.name
and
.Dv user.email
configuration settings can be
obtained from the repository's
.Pa .git/config
file or from Git's global
.Pa ~/.gitconfig
configuration file.
.Pp
The options for
.Cm got commit
are as follows:
.Bl -tag -width Ds
.It Fl A Ar author
Set author information in the newly created commit to
.Ar author .
This is useful when committing changes on behalf of someone else.
The
.Ar author
argument must use the same format as the
.Ev GOT_AUTHOR
environment variable.
.Pp
In addition to storing author information, the newly created commit
object will retain
.Dq committer
information which is obtained, as usual, from the
.Ev GOT_AUTHOR
environment variable, or
.Xr got.conf 5 ,
or Git configuration settings.
.It Fl C
Allow committing files in conflicted status.
.Pp
Committing files with conflict markers should generally be avoided.
Cases where conflict markers must be stored in the repository for
some legitimate reason should be very rare.
There are usually ways to avoid storing conflict markers verbatim by
applying appropriate programming tricks.
.It Fl F Ar path
Use the prepared log message stored in the file found at
.Ar path
when creating the new commit.
.Cm got commit
opens a temporary file in an editor where the prepared log message can be
reviewed and edited further if needed.
Cannot be used together with the
.Fl m
option.
.It Fl m Ar message
Use the specified log message when creating the new commit.
Cannot be used together with the
.Fl F
option.
.It Fl N
This option prevents
.Cm got commit
from opening the commit message in an editor.
It has no effect unless it is used together with the
.Fl F
option and is intended for non-interactive use such as scripting.
.It Fl n
This option prevents
.Cm got commit
from generating a diff of the to-be-committed changes in a temporary file
which can be viewed while editing a commit message.
.It Fl S
Allow the addition of symbolic links which point outside of the path space
that is under version control.
By default,
.Cm got commit
will reject such symbolic links due to safety concerns.
As a precaution,
.Nm
may decide to represent such a symbolic link as a regular file which contains
the link's target path, rather than creating an actual symbolic link which
points outside of the work tree.
Use of this option is discouraged because external mechanisms such as
.Dq make obj
are better suited for managing symbolic links to paths not under
version control.
.El
.Pp
.Cm got commit
will refuse to run if certain preconditions are not met.
If the work tree's current branch is not in the
.Dq refs/heads/
reference namespace, new commits may not be created on this branch.
Local changes may only be committed if they are based on file content
found in the most recent commit on the work tree's branch.
If a path is found to be out of date,
.Cm got update
must be used first in order to merge local changes with changes made
in the repository.
.Tg cy
.It Xo
.Cm cherrypick
.Op Fl lX
.Op Ar commit
.Xc
.Dl Pq alias: Cm cy
Merge changes from a single
.Ar commit
into the work tree.
The specified
.Ar commit
should be on a different branch than the work tree's base commit.
The expected argument is a reference or a commit ID SHA1 hash.
An abbreviated hash argument will be expanded to a full SHA1 hash
automatically, provided the abbreviation is unique.
.Pp
Show the status of each affected file, using the following status codes:
.Bl -column YXZ description
.It G Ta file was merged
.It C Ta file was merged and conflicts occurred during merge
.It ! Ta changes destined for a missing file were not merged
.It D Ta file was deleted
.It d Ta file's deletion was prevented by local modifications
.It A Ta new file was added
.It \(a~ Ta changes destined for a non-regular file were not merged
.It ? Ta changes destined for an unversioned file were not merged
.El
.Pp
The merged changes will appear as local changes in the work tree, which
may be viewed with
.Cm got diff ,
amended manually or with further
.Cm got cherrypick
commands,
committed with
.Cm got commit .
.Pp
If invoked in a work tree where no
.Cm rebase ,
.Cm histedit ,
or
.Cm merge
operation is taking place,
.Cm got cherrypick
creates a record of commits which have been merged into the work tree.
When a file changed by
.Cm got cherrypick
is committed with
.Cm got commit ,
the log messages of relevant merged commits will then appear in the editor,
where the messages should be further adjusted to convey the reasons for
cherrypicking the changes.
Upon exiting the editor, if the time stamp of the log message file
is unchanged or the log message is empty,
.Cm got commit
will fail with an unmodified or empty log message error.
.Pp
If all the changes in all files touched by a given commit are discarded,
e.g. with
.Cm got revert ,
this commit's log message record will also disappear.
.Pp
.Cm got cherrypick
will refuse to run if certain preconditions are not met.
If the work tree contains multiple base commits, it must first be updated
to a single base commit with
.Cm got update .
If any relevant files already contain merge conflicts, these
conflicts must be resolved first.
.Pp
The options for
.Nm
.Cm cherrypick
are as follows:
.Bl -tag -width Ds
.It Fl l
Display a list of commit log messages recorded by cherrypick operations,
represented by references in the
.Dq refs/got/worktree
reference namespace.
If a
.Ar commit
is specified, only show the log message of the specified commit.
.Pp
If invoked in a work tree, only log messages recorded by cherrypick operations
in the current work tree will be displayed.
Otherwise, all commit log messages will be displayed irrespective of the
work tree in which they were created.
This option cannot be used with
.Fl X .
.It Fl X
Delete log messages created by previous cherrypick operations, represented by
references in the
.Dq refs/got/worktree
reference namespace.
If a
.Ar commit
is specified, only delete the log message of the specified commit.
.Pp
If invoked in a work tree, only log messages recorded by cherrypick operations
in the current work tree will be deleted.
Otherwise, all commit log messages will be deleted irrespective of the
work tree in which they were created.
This option cannot be used with
.Fl l .
.El
.Pp
.Tg bo
.It Xo
.Cm backout
.Op Fl lX
.Op Ar commit
.Xc
.Dl Pq alias: Cm bo
Reverse-merge changes from a single
.Ar commit
into the work tree.
The specified
.Ar commit
should be on the same branch as the work tree's base commit.
The expected argument is a reference or a commit ID SHA1 hash.
An abbreviated hash argument will be expanded to a full SHA1 hash
automatically, provided the abbreviation is unique.
.Pp
Show the status of each affected file, using the following status codes:
.Bl -column YXZ description
.It G Ta file was merged
.It C Ta file was merged and conflicts occurred during merge
.It ! Ta changes destined for a missing file were not merged
.It D Ta file was deleted
.It d Ta file's deletion was prevented by local modifications
.It A Ta new file was added
.It \(a~ Ta changes destined for a non-regular file were not merged
.It ? Ta changes destined for an unversioned file were not merged
.El
.Pp
The reverse-merged changes will appear as local changes in the work tree,
which may be viewed with
.Cm got diff ,
amended manually or with further
.Cm got backout
commands,
committed with
.Cm got commit .
.Pp
If invoked in a work tree where no
.Cm rebase ,
.Cm histedit ,
or
.Cm merge
operation is taking place,
.Cm got backout
creates a record of commits which have been reverse-merged into the work tree.
When a file changed by
.Cm got backout
is committed with
.Cm got commit ,
the log messages of relevant reverse-merged commits will then appear in
the editor, where the messages should be further adjusted to convey the
reasons for backing out the changes.
Upon exiting the editor, if the time stamp of the log message file
is unchanged or the log message is empty,
.Cm got commit
will fail with an unmodified or empty log message error.
.Pp
If all the changes in all files touched by a given commit are discarded,
e.g. with
.Cm got revert ,
this commit's log message record will also disappear.
.Pp
.Cm got backout
will refuse to run if certain preconditions are not met.
If the work tree contains multiple base commits, it must first be updated
to a single base commit with
.Cm got update .
If any relevant files already contain merge conflicts, these
conflicts must be resolved first.
.Pp
The options for
.Nm
.Cm backout
are as follows:
.Bl -tag -width Ds
.It Fl l
Display a list of commit log messages recorded by backout operations,
represented by references in the
.Dq refs/got/worktree
reference namespace.
If a
.Ar commit
is specified, only show the log message of the specified commit.
.Pp
If invoked in a work tree, only log messages recorded by backout operations
in the current work tree will be displayed.
Otherwise, all commit log messages will be displayed irrespective of the
work tree in which they were created.
This option cannot be used with
.Fl X .
.It Fl X
Delete log messages created by previous backout operations, represented by
references in the
.Dq refs/got/worktree
reference namespace.
If a
.Ar commit
is specified, only delete the log message of the specified commit.
.Pp
If invoked in a work tree, only log messages recorded by backout operations
in the current work tree will be deleted.
Otherwise, all commit log messages will be deleted irrespective of the
work tree in which they were created.
This option cannot be used with
.Fl l .
.El
.It Xo
.Cm cat
.Op Fl P
.Op Fl c Ar commit
.Op Fl r Ar repository-path
.Ar arg ...
.Xc
Parse and print contents of objects to standard output in a line-based
text format.
Content of commit, tree, and tag objects is printed in a way similar
to the actual content stored in such objects.
Blob object contents are printed as they would appear in files on disk.
.Pp
Attempt to interpret each argument as a reference, a tag name, or
an object ID SHA1 hash.
References will be resolved to an object ID.
Tag names will resolved to a tag object.
An abbreviated hash argument will be expanded to a full SHA1 hash
automatically, provided the abbreviation is unique.
.Pp
If none of the above interpretations produce a valid result, or if the
.Fl P
option is used, attempt to interpret the argument as a path which will
be resolved to the ID of an object found at this path in the repository.
.Pp
The options for
.Cm got cat
are as follows:
.Bl -tag -width Ds
.It Fl c Ar commit
Look up paths in the specified
.Ar commit .
If this option is not used, paths are looked up in the commit resolved
via the repository's HEAD reference.
The expected argument is a commit ID SHA1 hash or an existing reference
or tag name which will be resolved to a commit ID.
An abbreviated hash argument will be expanded to a full SHA1 hash
automatically, provided the abbreviation is unique.
.It Fl P
Interpret all arguments as paths only.
This option can be used to resolve ambiguity in cases where paths
look like tag names, reference names, or object IDs.
.It Fl r Ar repository-path
Use the repository at the specified path.
If not specified, assume the repository is located at or above the current
working directory.
If this directory is a
.Nm
work tree, use the repository path associated with this work tree.
.El
.It Cm info Op Ar path ...
Display meta-data stored in a work tree.
See
.Xr got-worktree 5
for details.
.Pp
The work tree to use is resolved implicitly by walking upwards from the
current working directory.
.Pp
If one or more
.Ar path
arguments are specified, show additional per-file information for tracked
files located at or within these paths.
If a
.Ar path
argument corresponds to the work tree's root directory, display information
for all tracked files.
.El
.Sh ENVIRONMENT
.Bl -tag -width GOT_IGNORE_GITCONFIG
.It Ev GOT_AUTHOR
The author's name and email address, such as
.Dq An Flan Hacker Aq Mt flan_hacker@openbsd.org .
Used by the
.Cm got commit ,
.Cm got import ,
.Cm got rebase ,
.Cm got merge ,
and
.Cm got histedit
commands.
Because
.Xr git 1
may fail to parse commits without an email address in author data,
.Nm
attempts to reject
.Ev GOT_AUTHOR
environment variables with a missing email address.
.Pp
.Ev GOT_AUTHOR will be overridden by configuration settings in
.Xr got.conf 5
or by Git's
.Dv user.name
and
.Dv user.email
configuration settings in the repository's
.Pa .git/config
file.
The
.Dv user.name
and
.Dv user.email
configuration settings contained in Git's global
.Pa ~/.gitconfig
configuration file will only be used if neither
.Xr got.conf 5
nor the
.Ev GOT_AUTHOR
environment variable provide author information.
.It Ev GOT_IGNORE_GITCONFIG
If this variable is set then any remote repository definitions or author
information found in Git configuration files will be ignored.
.It Ev GOT_LOG_DEFAULT_LIMIT
The default limit on the number of commits traversed by
.Cm got log .
If set to zero, the limit is unbounded.
This variable will be silently ignored if it is set to a non-numeric value.
.It Ev VISUAL , EDITOR
The editor spawned by
.Cm got commit ,
.Cm got histedit ,
.Cm got import ,
or
.Cm got tag .
If not set, the
.Xr vi 1
text editor will be spawned.
.El
.Sh FILES
.Bl -tag -width packed-refs -compact
.It Pa got.conf
Repository-wide configuration settings for
.Nm .
If present, a
.Xr got.conf 5
configuration file located in the root directory of a Git repository
supersedes any relevant settings in Git's
.Pa config
file.
.Pp
.It Pa .cvg/got.conf
Worktree-specific configuration settings for
.Nm .
If present, a
.Xr got.conf 5
configuration file in the
.Pa .cvg
meta-data directory of a work tree supersedes any relevant settings in
the repository's
.Xr got.conf 5
configuration file and Git's
.Pa config
file.
.El
.Sh EXIT STATUS
.Ex -std got
.Sh EXAMPLES
Enable tab-completion of
.Nm
command names in
.Xr ksh 1 :
.Pp
.Dl $ set -A complete_got_1 -- $(got -h 2>&1 | sed -n s/commands://p)
.Pp
Clone an existing Git repository for use with
.Nm :
.Pp
.Dl $ cd /var/git/
.Dl $ got clone ssh://git@github.com/openbsd/src.git
.Pp
Unfortunately, many of the popular Git hosting sites do not offer anonymous
access via SSH.
Such sites will require an account to be created, and a public SSH key to be
uploaded to this account, before repository access via ssh:// URLs will work.
.Pp
Use of HTTP URLs currently requires
.Xr git 1 :
.Pp
.Dl $ cd /var/git/
.Dl $ git clone --bare https://github.com/openbsd/src.git
.Pp
Alternatively, for quick and dirty local testing of
.Nm
a new Git repository could be created and populated with files,
e.g. from a temporary CVS checkout located at
.Pa /tmp/src :
.Pp
.Dl $ gotadmin init /var/git/src.git
.Dl $ got import -r /var/git/src.git -I CVS -I obj /tmp/src
.Pp
Check out a work tree from the Git repository to /usr/src:
.Pp
.Dl $ got checkout /var/git/src.git /usr/src
.Pp
View local changes in a work tree directory:
.Pp
.Dl $ got diff | less
.Pp
In a work tree, display files in a potentially problematic state:
.Pp
.Dl $ got status -s 'C!~?'
.Pp
Interactively revert selected local changes in a work tree directory:
.Pp
.Dl $ got revert -p -R\ .
.Pp
In a work tree or a git repository directory, list all branch references:
.Pp
.Dl $ got branch -l
.Pp
As above, but list the most recently modified branches only:
.Pp
.Dl $ got branch -lt | head
.Pp
In a work tree or a git repository directory, create a new branch called
.Dq unified-buffer-cache
which is forked off the
.Dq master
branch:
.Pp
.Dl $ got branch -c master unified-buffer-cache
.Pp
Switch an existing work tree to the branch
.Dq unified-buffer-cache .
Local changes in the work tree will be preserved and merged if necessary:
.Pp
.Dl $ got update -b unified-buffer-cache
.Pp
Create a new commit from local changes in a work tree directory.
This new commit will become the head commit of the work tree's current branch:
.Pp
.Dl $ got commit
.Pp
In a work tree or a git repository directory, view changes committed in
the 3 most recent commits to the work tree's branch, or the branch resolved
via the repository's HEAD reference, respectively:
.Pp
.Dl $ got log -p -l 3
.Pp
As above, but display changes in the order in which
.Xr patch 1
could apply them in sequence:
.Pp
.Dl $ got log -p -l 3 -R
.Pp
In a work tree or a git repository directory, log the history of a subdirectory:
.Pp
.Dl $ got log sys/uvm
.Pp
While operating inside a work tree, paths are specified relative to the current
working directory, so this command will log the subdirectory
.Pa sys/uvm :
.Pp
.Dl $ cd sys/uvm && got log\ .
.Pp
And this command has the same effect:
.Pp
.Dl $ cd sys/dev/usb && got log ../../uvm
.Pp
And this command displays work tree meta-data about all tracked files:
.Pp
.Dl $ cd /usr/src
.Dl $ got info\ . | less
.Pp
Add new files and remove obsolete files in a work tree directory:
.Pp
.Dl $ got add sys/uvm/uvm_ubc.c
.Dl $ got remove sys/uvm/uvm_vnode.c
.Pp
Create a new commit from local changes in a work tree directory
with a pre-defined log message.
.Pp
.Dl $ got commit -m 'unify the buffer cache'
.Pp
Alternatively, create a new commit from local changes in a work tree
directory with a log message that has been prepared in the file
.Pa /tmp/msg :
.Pp
.Dl $ got commit -F /tmp/msg
.Pp
Update any work tree checked out from the
.Dq unified-buffer-cache
branch to the latest commit on this branch:
.Pp
.Dl $ got update
.Pp
Roll file content on the unified-buffer-cache branch back by one commit,
and then fetch the rolled-back change into the work tree as a local change
to be amended and perhaps committed again:
.Pp
.Dl $ got backout unified-buffer-cache
.Dl $ got commit -m 'roll back previous'
.Dl $ # now back out the previous backout :-)
.Dl $ got backout unified-buffer-cache
.Pp
Fetch new changes on the remote repository's
.Dq master
branch, making them visible on the local repository's
.Dq origin/master
branch:
.Pp
.Dl $ cd /usr/src
.Dl $ got fetch
.Pp
In a repository created with a HTTP URL and
.Cm git clone --bare
the
.Xr git-fetch 1
command must be used instead:
.Pp
.Dl $ cd /var/git/src.git
.Dl $ git fetch origin master:refs/remotes/origin/master
.Pp
Rebase the local
.Dq master
branch to merge the new changes that are now visible on the
.Dq origin/master
branch:
.Pp
.Dl $ cd /usr/src
.Dl $ got update -b origin/master
.Dl $ got rebase master
.Pp
Rebase the
.Dq unified-buffer-cache
branch on top of the new head commit of the
.Dq master
branch.
.Pp
.Dl $ got update -b master
.Dl $ got rebase unified-buffer-cache
.Pp
Create a patch from all changes on the unified-buffer-cache branch.
The patch can be mailed out for review and applied to
.Ox Ns 's
CVS tree:
.Pp
.Dl $ got diff master unified-buffer-cache > /tmp/ubc.diff
.Pp
Edit the entire commit history of the
.Dq unified-buffer-cache
branch:
.Pp
.Dl $ got update -b unified-buffer-cache
.Dl $ got update -c master
.Dl $ got histedit
.Pp
Before working against existing branches in a repository cloned with
.Cm git clone --bare
instead of
.Cm got clone ,
a Git
.Dq refspec
must be configured to map all references in the remote repository
into the
.Dq refs/remotes
namespace of the local repository.
This can be achieved by setting Git's
.Pa remote.origin.fetch
configuration variable to the value
.Dq +refs/heads/*:refs/remotes/origin/*
with the
.Cm git config
command:
.Pp
.Dl $ cd /var/git/repo
.Dl $ git config remote.origin.fetch '+refs/heads/*:refs/remotes/origin/*'
.Pp
Additionally, the
.Dq mirror
option must be disabled:
.Pp
.Dl $ cd /var/git/repo
.Dl $ git config remote.origin.mirror false
.Pp
Alternatively, the following
.Xr git-fetch 1
configuration item can be added manually to the Git repository's
.Pa config
file:
.Pp
.Dl [remote \&"origin\&"]
.Dl url = ...
.Dl fetch = +refs/heads/*:refs/remotes/origin/*
.Dl mirror = false
.Pp
This configuration leaves the local repository's
.Dq refs/heads
namespace free for use by local branches checked out with
.Cm got checkout
and, if needed, created with
.Cm got branch .
Branches in the
.Dq refs/remotes/origin
namespace can now be updated with incoming changes from the remote
repository with
.Cm got fetch
or
.Xr git-fetch 1
without extra command line arguments.
Newly fetched changes can be examined with
.Cm got log .
.Pp
Display changes on the remote repository's version of the
.Dq master
branch, as of the last time
.Cm got fetch
was run:
.Pp
.Dl $ got log -c origin/master | less
.Pp
As shown here, most commands accept abbreviated reference names such as
.Dq origin/master
instead of
.Dq refs/remotes/origin/master .
The latter is only needed in case of ambiguity.
.Pp
.Cm got rebase
can be used to merge changes which are visible on the
.Dq origin/master
branch into the
.Dq master
branch.
This will also merge local changes, if any, with the incoming changes:
.Pp
.Dl $ got update -b origin/master
.Dl $ got rebase master
.Pp
In order to make changes committed to the
.Dq unified-buffer-cache
visible on the
.Dq master
branch, the
.Dq unified-buffer-cache
branch can be rebased onto the
.Dq master
branch:
.Pp
.Dl $ got update -b master
.Dl $ got rebase unified-buffer-cache
.Pp
Changes on the
.Dq unified-buffer-cache
branch can now be made visible on the
.Dq master
branch with
.Cm got integrate .
Because the rebase operation switched the work tree to the
.Dq unified-buffer-cache
branch, the work tree must be switched back to the
.Dq master
branch first:
.Pp
.Dl $ got update -b master
.Dl $ got integrate unified-buffer-cache
.Pp
On the
.Dq master
branch, log messages for local changes can now be amended with
.Dq OK
by other developers and any other important new information:
.Pp
.Dl $ got update -c origin/master
.Dl $ got histedit -m
.Pp
If the remote repository offers write access, local changes on the
.Dq master
branch can be sent to the remote repository with
.Cm got send .
Usually,
.Cm got send
can be run without further arguments.
The arguments shown here match defaults, provided the work tree's
current branch is the
.Dq master
branch:
.Pp
.Dl $ got send -b master origin
.Pp
If the remote repository requires the HTTPS protocol, the
.Xr git-push 1
command must be used instead:
.Pp
.Dl $ cd /var/git/src.git
.Dl $ git push origin master
.Pp
When making contributions to projects which use the
.Dq pull request
workflow, SSH protocol repository access needs to be set up first.
Once an account has been created on a Git hosting site it should
be possible to upload a public SSH key for repository access
authentication.
.Pp
The
.Dq pull request
workflow will usually involve two remote repositories.
In the real-life example below, the
.Dq origin
repository was forked from the
.Dq upstream
repository by using the Git hosting site's web interface.
The
.Xr got.conf 5
file in the local repository describes both remote repositories:
.Bd -literal -offset indent
# Jelmers's repository, which accepts pull requests
remote "upstream" {
        server git@github.com
        protocol ssh
        repository "/jelmer/dulwich"
        branch { "master" }
}

# Stefan's fork, used as the default remote repository
remote "origin" {
        server git@github.com
        protocol ssh
        repository "/stspdotname/dulwich"
        branch { "master" }
}
.Ed
.Pp
With this configuration, Stefan can create commits on
.Dq refs/heads/master
and send them to the
.Dq origin
repository by running:
.Pp
.Dl $ got send -b master origin
.Pp
The changes can now be proposed to Jelmer by opening a pull request
via the Git hosting site's web interface.
If Jelmer requests further changes to be made, additional commits
can be created on the
.Dq master
branch and be added to the pull request by running
.Cd got send
again.
.Pp
If Jelmer prefers additional commits to be
.Dq squashed
then the following commands can be used to achieve this:
.Pp
.Dl $ got update -b master
.Dl $ got update -c origin/master
.Dl $ got histedit -f
.Dl $ got send -f -b master origin
.Pp
In addition to reviewing the pull request in the web user interface,
Jelmer can fetch the pull request's branch into his local repository
and create a local branch which contains the proposed changes:
.Pp
.Dl $ got fetch -R refs/pull/1046/head origin
.Dl $ got branch -c refs/remotes/origin/pull/1046/head pr1046
.Pp
Once Jelmer has accepted the pull request, Stefan can fetch the
merged changes, and possibly several other new changes, by running:
.Pp
.Dl $ got fetch upstream
.Pp
The merged changes will now be visible under the reference
.Dq refs/remotes/upstream/master .
The local
.Dq master
branch can now be rebased on top of the latest changes
from upstream:
.Pp
.Dl $ got update -b upstream/master
.Dl $ got rebase master
.Pp
As an alternative to
.Cm got rebase ,
branches can be merged with
.Cm got merge :
.Pp
.Dl $ got update -b master
.Dl $ got merge upstream/master
.Pp
The question of whether to rebase or merge branches is philosophical.
When in doubt, refer to the software project's policies set by project
maintainers.
.Pp
As a final step, the forked repository's copy of the master branch needs
to be kept in sync by sending the new changes there:
.Pp
.Dl $ got send -f -b master origin
.Pp
If multiple pull requests need to be managed in parallel, a separate branch
must be created for each pull request with
.Cm got branch .
Each such branch can then be used as above, in place of
.Dq refs/heads/master .
Changes for any accepted pull requests will still appear under
.Dq refs/remotes/upstream/master,
regardless of which branch was used in the forked repository to
create a pull request.
.Sh SEE ALSO
.Xr gotadmin 1 ,
.Xr tog 1 ,
.Xr git-repository 5 ,
.Xr got-worktree 5 ,
.Xr got.conf 5 ,
.Xr gotwebd 8
.Sh AUTHORS
.An Anthony J. Bentley Aq Mt bentley@openbsd.org
.An Christian Weisgerber Aq Mt naddy@openbsd.org
.An Hiltjo Posthuma Aq Mt hiltjo@codemadness.org
.An Josh Rickmar Aq Mt jrick@zettaport.com
.An Joshua Stein Aq Mt jcs@openbsd.org
.An Klemens Nanni Aq Mt kn@openbsd.org
.An Martin Pieuchot Aq Mt mpi@openbsd.org
.An Neels Hofmeyr Aq Mt neels@hofmeyr.de
.An Omar Polo Aq Mt op@openbsd.org
.An Ori Bernstein Aq Mt ori@openbsd.org
.An Sebastien Marie Aq Mt semarie@openbsd.org
.An Stefan Sperling Aq Mt stsp@openbsd.org
.An Steven McDonald Aq Mt steven@steven-mcdonald.id.au
.An Theo Buehler Aq Mt tb@openbsd.org
.An Thomas Adam Aq Mt thomas@xteddy.org
.An Tracey Emery Aq Mt tracey@traceyemery.net
.An Yang Zhong Aq Mt yzhong@freebsdfoundation.org
.Pp
Parts of
.Nm ,
.Xr tog 1 ,
and
.Xr gotwebd 8
were derived from code under copyright by:
.Pp
.An Caldera International
.An Daniel Hartmeier
.An Esben Norby
.An Henning Brauer
.An Håkan Olsson
.An Ingo Schwarze
.An Jean-Francois Brousseau
.An Joris Vink
.An Jyri J. Virkki
.An Larry Wall
.An Markus Friedl
.An Niall O'Higgins
.An Niklas Hallqvist
.An Ray Lai
.An Ryan McBride
.An Theo de Raadt
.An Todd C. Miller
.An Xavier Santolaria
.Pp
.Nm
contains code contributed to the public domain by
.An Austin Appleby .
.Sh CAVEATS
.Nm
is a work-in-progress and some features remain to be implemented.
.Pp
At present, the user has to fall back on
.Xr git 1
to perform some tasks.
In particular:
.Bl -bullet
.It
Reading from remote repositories over HTTP or HTTPS protocols requires
.Xr git-clone 1
and
.Xr git-fetch 1 .
.It
Writing to remote repositories over HTTP or HTTPS protocols requires
.Xr git-push 1 .
.It
The creation of merge commits with more than two parent commits requires
.Xr git-merge 1 .
.It
In situations where files or directories were moved around
.Cm got
will not automatically merge changes to new locations and
.Xr git 1
will usually produce better results.
.El