guilt

   1 #!/bin/sh
   2 #
   3 # Copyright (c) Josef "Jeff" Sipek, 2006-2009
   4 #
   5
   6 GUILT_VERSION="0.32-rc2"
   7 GUILT_NAME="Ciuleandra"
   8
   9 # If the first argument is one of the below, display the man page instead of
  10 # the rather silly and mostly useless usage string
  11 case $1 in
  12         -h|--h|--he|--hel|--help)
  13         shift
  14         exec "guilt-help" "`basename $0`"
  15         exit
  16         ;;
  17         -V|--ver|--versi|--versio|--version)
  18         echo "Guilt version $GUILT_VERSION"
  19         exit
  20         ;;
  21 esac
  22
  23 # we change directories ourselves
  24 SUBDIRECTORY_OK=1
  25
  26 . "$(git --exec-path)/git-sh-setup"
  27
  28 #
  29 # Git version check
  30 #
  31 gitver=`git --version | cut -d' ' -f3 | sed -e 's/^debian\.//'`
  32 case "$gitver" in
  33         1.5.*)  ;; # git config
  34         1.6.*)  ;; # git config
  35         *)      die "Unsupported version of git ($gitver)" ;;
  36 esac
  37
  38 #
  39 # Shell library
  40 #
  41
  42 # echo -n is a bashism, use printf instead
  43 _disp()
  44 {
  45         printf "%b" "$*"
  46 }
  47
  48 # echo -e is a bashism, use printf instead
  49 disp()
  50 {
  51         printf "%b\n" "$*"
  52 }
  53
  54 noerr()
  55 {
  56         "$@" 2>/dev/null
  57 }
  58
  59 silent()
  60 {
  61         "$@" >/dev/null 2>/dev/null
  62 }
  63
  64 ########
  65
  66 guilt_commands()
  67 {
  68         find "`dirname $0`" -maxdepth 1 -name "guilt-*" -type f -perm +111 | sed -e "s/.*\\/`basename $0`-//"
  69 }
  70
  71 if [ "`basename $0`" = "guilt" ]; then
  72         # being run as standalone
  73
  74         # by default, we shouldn't fail
  75         cmd=
  76
  77         if [ $# -ne 0 ]; then
  78                 # take first arg, and try to execute it
  79
  80                 arg="$1"
  81                 dir=`dirname $0`
  82
  83                 if [ -x "$dir/guilt-$arg" ]; then
  84                         cmd=$arg
  85                 else
  86                         # might be a short handed
  87                         for command in $(guilt_commands); do
  88                                 case $command in
  89                                 $arg*)
  90                                         if [ -x "$dir/guilt-$command" ]; then
  91                                                 cmd=$command
  92                                         fi
  93                                         ;;
  94                                 esac
  95                         done
  96                 fi
  97                 if [ -n "$cmd" ]; then
  98                         shift
  99                         exec "$dir/guilt-$cmd" "$@"
 100
 101                         # this is not reached because of the exec
 102                         die "Exec failed! Something is terribly wrong!"
 103                 else
 104                         disp "Command $arg not found" >&2
 105                         disp "" >&2
 106                 fi
 107         fi
 108
 109         # no args passed or invalid command entered, just output help summary
 110
 111         disp "Guilt v$GUILT_VERSION"
 112         disp ""
 113         disp "Pick a command:"
 114         guilt_commands | sort | column | column -t | sed -e 's/^/       /'
 115
 116         disp ""
 117         disp "Example:"
 118         disp "\tguilt-push"
 119         disp "or"
 120         disp "\tguilt push"
 121
 122         # now, let's exit
 123         exit 1
 124 fi
 125
 126 ########
 127
 128 #
 129 # Library goodies
 130 #
 131
 132 # usage: valid_patchname <patchname>
 133 valid_patchname()
 134 {
 135         case "$1" in
 136                 /*|./*|../*|*/./*|*/../*|*/.|*/..|*/|*\ *|*\    *)
 137                         return 1;;
 138                 *)
 139                         return 0;;
 140         esac
 141 }
 142
 143 get_branch()
 144 {
 145         silent git symbolic-ref HEAD || \
 146                 die "Working on a detached HEAD is unsupported."
 147
 148         git symbolic-ref HEAD | sed -e 's,^refs/heads/,,'
 149 }
 150
 151 verify_branch()
 152 {
 153         [ ! -d "$GIT_DIR/patches" ] &&
 154                 die "Patches directory doesn't exist, try guilt-init"
 155         [ ! -d "$GIT_DIR/patches/$branch" ] &&
 156                 die "Branch $branch is not initialized, try guilt-init"
 157         [ ! -f "$GIT_DIR/patches/$branch/series" ] &&
 158                 die "Branch $branch does not have a series file"
 159         [ ! -f "$GIT_DIR/patches/$branch/status" ] &&
 160                 die "Branch $branch does not have a status file"
 161         [ -f "$GIT_DIR/patches/$branch/applied" ] &&
 162                 die "Warning: Branch $branch has 'applied' file - guilt is not compatible with stgit"
 163 }
 164
 165 get_top()
 166 {
 167         tail -1 "$GUILT_DIR/$branch/status"
 168 }
 169
 170 get_prev()
 171 {
 172         if [ `wc -l < "$GUILT_DIR/$branch/status"` -gt 1 ]; then
 173                 tail -n 2 "$GUILT_DIR/$branch/status" | head -n 1
 174         fi
 175 }
 176
 177 get_full_series()
 178 {
 179         # ignore all lines matching:
 180         #       - empty lines
 181         #       - whitespace only
 182         #       - optional whitespace followed by '#' followed by more
 183         #         optional whitespace
 184         # also remove comments from end of lines
 185         sed -n -e "/^[[:space:]]*\(#.*\)*\$/ ! {
 186                 s/[[:space:]]*#.*\$//
 187
 188                 p
 189                 }
 190                 " $series
 191 }
 192
 193 get_series()
 194 {
 195         get_full_series | while read p; do
 196                 check_guards "$p" && echo "$p"
 197         done
 198 }
 199
 200 # usage: check_guards <patch>
 201 # Returns 0 if the patch should be pushed
 202 check_guards()
 203 {
 204         get_guards "$1" | while read guard; do
 205                 case "$guard" in
 206                         +*)
 207                                 # Push +guard *only if* guard selected
 208                                 silent grep -e "^$guard\$" "$guards_file" || return 1
 209                                 ;;
 210                         -*)
 211                                 # Push -guard *unless* guard selected
 212                                 silent grep -e "^$guard\$" "$guards_file" && return 1
 213                                 ;;
 214                 esac
 215         done
 216
 217         # propagate return from subshell
 218         return $?
 219 }
 220
 221 # usage: get_guards <patch>
 222 get_guards()
 223 {
 224         awk -v pname="$1" '
 225 ($1 == pname) {
 226         guards = "";
 227
 228         for(i=2; i<=NF; i++) {
 229                 sub(/#[^+-]*/, "", $i);
 230                 if (length($i)) {
 231                         if (length(guards))
 232                                 guards = guards " " $i;
 233                         else
 234                                 guards = $i;
 235                 }
 236         }
 237
 238         print guards;
 239 }' < "$series"
 240 }
 241
 242 # usage: set_guards <patch> <guards...>
 243 set_guards()
 244 {
 245         (
 246                 p="$1"
 247                 shift
 248                 for x in "$@"; do
 249                         case "$x" in
 250                                 [+-]*)
 251                                         awk -v pname="$p" -v newguard="$x" '{
 252 if ($1 == pname)
 253         print $0 " #" newguard;
 254 else
 255         print $0;
 256 }' < "$series" > "$series.tmp"
 257                                         mv "$series.tmp" "$series"
 258                                         ;;
 259                                 *)
 260                                         echo "'$x' is not a valid guard name" >&2
 261                                         ;;
 262                         esac
 263                 done
 264         )
 265 }
 266
 267 # usage: unset_guards <patch> <guards...>
 268 unset_guards()
 269 {
 270         (
 271                 p="$1"
 272                 shift
 273                 for x in "$@"; do
 274                         awk -v pname="$p" -v oldguard="$x" '{
 275 if ($1 == pname) {
 276         guards = "";
 277
 278         for(i=2; i<=NF; i++) {
 279                 if ($i == "#" oldguard)
 280                         continue;
 281
 282                 if (length(guards))
 283                         guards = guards " " $i;
 284                 else
 285                         guards = $i;
 286         }
 287
 288         if (length(guards))
 289                 print $1 " " guards;
 290         else
 291                 print $1;
 292 } else
 293         print $0;
 294 }' < "$series" > "$series.tmp"
 295                         mv "$series.tmp" "$series"
 296                 done
 297         )
 298 }
 299
 300 # usage: do_make_header <hash>
 301 do_make_header()
 302 {
 303         # we should try to work with commit objects only
 304         if [ `git cat-file -t "$1"` != "commit" ]; then
 305                 disp "Hash $1 is not a commit object" >&2
 306                 disp "Aborting..." >&2
 307                 exit 2
 308         fi
 309
 310         git cat-file -p "$1" | awk '
 311                 BEGIN{headers=1; firstline=1}
 312                 /^author / && headers {
 313                         sub(/^author +/, "");
 314                         sub(/ [0-9]* [+-]*[0-9][0-9]*$/, "");
 315                         author=$0
 316                 }
 317                 !headers {
 318                         print
 319                         if (firstline) {
 320                                 firstline = 0;
 321                                 print "\nFrom: " author;
 322                         }
 323                 }
 324                 /^$/ && headers { headers = 0 }
 325         '
 326 }
 327
 328 # usage: do_get_patch patchfile
 329 do_get_patch()
 330 {
 331         cat "$1" | awk '
 332 BEGIN{}
 333 /^(diff |---$|--- )/,/END{}/
 334 '
 335 }
 336
 337 # usage: do_get_header patchfile
 338 do_get_header()
 339 {
 340         # The complexity arises from the fact that we want to ignore the
 341         # From line and the empty line after it if it exists
 342
 343         # 2nd line skips the From line
 344         # 3rd line skips the empty line right after a From line
 345         # 4th line terminates execution when we encounter the diff
 346         cat "$1" | awk '
 347 BEGIN{skip=0}
 348 /^Subject:/ && (NR==1){print substr($0, 10); next}
 349 /^From:/{skip=1; next}
 350 /^[ \t\f\n\r\v]*$/ && (skip==1){skip=0; next}
 351 /^(diff |---$|--- )/{exit}
 352 {print $0}
 353 END{}
 354 '
 355 }
 356
 357 # usage: do_get_full_header patchfile
 358 do_get_full_header()
 359 {
 360         # 2nd line checks for the begining of a patch
 361         # 3rd line outputs the line if it didn't get pruned by the above rules
 362         cat "$1" | awk '
 363 BEGIN{}
 364 /^(diff |---$|--- )/{exit}
 365 {print $0}
 366 END{}
 367 '
 368 }
 369
 370 # usage: assert_head_check
 371 assert_head_check()
 372 {
 373         if ! head_check refs/patches/$branch/`get_top`; then
 374                 die "aborting..."
 375         fi
 376 }
 377
 378 # usage: head_check <expected hash>
 379 head_check()
 380 {
 381         # make sure we're not doing funky things to commits that don't
 382         # belong to us
 383
 384         case "$1" in
 385                 '')
 386                         # the expected hash is empty
 387                         return 0 ;;
 388                 refs/patches/$branch/)
 389                         # the expected hash is an invalid rev
 390                         return 0 ;;
 391         esac
 392
 393         if [ "`git rev-parse refs/heads/$branch`" != "`git rev-parse $1`" ]; then
 394                 disp "Expected HEAD commit $1" >&2
 395                 disp "                 got `git rev-parse refs/heads/$branch`" >&2
 396                 return 1
 397         fi
 398         return 0
 399 }
 400
 401 # usage: series_insert_patch <patchname>
 402 series_insert_patch()
 403 {
 404         awk -v top="`get_top`" -v new="$1" \
 405                 'BEGIN{if (top == "") print new;}
 406                 {
 407                         print $0;
 408                         if (top != "" && top == $0) print new;
 409                 }' "$series" > "$series.tmp"
 410         mv "$series.tmp" "$series"
 411 }
 412
 413 # usage: series_remove_patch <patchname>
 414 series_remove_patch()
 415 {
 416         grep -v "^$1\([[:space:]].*\)\?$" < "$series" > "$series.tmp"
 417         mv "$series.tmp" "$series"
 418 }
 419
 420 # usage: series_rename_patch <oldname> <newname>
 421 series_rename_patch()
 422 {
 423         # Rename the patch, but preserve comments on the line
 424         awk -v old="$1" -v new="$2" '
 425 {
 426         if (index($0, old) == 1)
 427                 print new substr($0, length(old) + 1);
 428         else
 429                 print $0;
 430 }' "$series" > "$series.tmp"
 431
 432         mv "$series.tmp" "$series"
 433 }
 434
 435 # usage: series_rename_patch <oldpatchname> <newpatchname>
 436 ref_rename_patch()
 437 {
 438         git update-ref "refs/patches/$branch/$2" `git rev-parse "refs/patches/$branch/$1"`
 439         remove_ref "refs/patches/$branch/$1"
 440 }
 441
 442 # Beware! This is one of the few (only?) places where we modify the applied
 443 # file directly
 444 #
 445 # usage: applied_rename_patch <oldname> <newname>
 446 applied_rename_patch()
 447 {
 448         awk -v old="$1" -v new="$2" \
 449                         'BEGIN{FS=":"}
 450                         { if ($0 == old)
 451                                 print new;
 452                         else
 453                                 print;
 454                         }' "$applied" > "$applied.tmp"
 455
 456         mv "$applied.tmp" "$applied"
 457 }
 458
 459 # usage: remove_patch_refs
 460 # reads patch names from stdin
 461 remove_patch_refs()
 462 {
 463         while read pname; do
 464                 remove_ref "refs/patches/$branch/$pname"
 465         done
 466 }
 467
 468 # usage: pop_many_patches <commitish> <number of patches>
 469 pop_many_patches()
 470 {
 471         assert_head_check
 472
 473         (
 474                 cd_to_toplevel
 475
 476                 # remove the patches refs
 477                 tail -$2 < "$applied" | remove_patch_refs
 478
 479                 git reset --hard "$1" > /dev/null
 480                 head -n "-$2" < "$applied" > "$applied.tmp"
 481                 mv "$applied.tmp" "$applied"
 482         )
 483 }
 484
 485 # usage: pop_all_patches
 486 pop_all_patches()
 487 {
 488         pop_many_patches \
 489                 `git rev-parse refs/patches/$branch/$(head -1 "$applied")^` \
 490                 `wc -l < "$applied"`
 491 }
 492
 493 # usage: remove_ref <refname>
 494 remove_ref()
 495 {
 496         (
 497                 # does the ref exist?
 498                 r=`git show-ref --verify -s "$1" 2> /dev/null`
 499                 [ $? -ne 0 ] && exit 0
 500
 501                 # remove it
 502                 git update-ref -d "$1" "$r"
 503         )
 504 }
 505
 506 # usage: commit patchname parent
 507 commit()
 508 {
 509         (
 510                 TMP_MSG=`get_tmp_file msg`
 511
 512                 p="$GUILT_DIR/$branch/$1"
 513                 pname="$1"
 514                 cd_to_toplevel
 515
 516                 git diff-files --name-only | (while read n; do git update-index "$n" ; done)
 517
 518                 # grab a commit message out of the patch
 519                 do_get_header "$p" > "$TMP_MSG"
 520
 521                 # make a default commit message if patch doesn't contain one
 522                 [ ! -s "$TMP_MSG" ] && echo "patch $pname" > "$TMP_MSG"
 523
 524                 # extract a From line from the patch header, and set
 525                 # GIT_AUTHOR_{NAME,EMAIL}
 526                 author_str=`sed -n -e '/^From:/ { s/^From: //; p; q; }; /^(diff |---$|--- )/ q' "$p"`
 527                 if [ ! -z "$author_str" ]; then
 528                         GIT_AUTHOR_NAME=`echo $author_str | sed -e 's/ *<.*$//'`
 529                         export GIT_AUTHOR_NAME="${GIT_AUTHOR_NAME:-" "}"
 530                         export GIT_AUTHOR_EMAIL="`echo $author_str | sed -e 's/[^<]*//'`"
 531                 fi
 532
 533                 # must strip nano-second part otherwise git gets very
 534                 # confused, and makes up strange timestamps from the past
 535                 # (chances are it decides to interpret it as a unix
 536                 # timestamp).
 537                 export GIT_AUTHOR_DATE="`stat -c %y "$p" | sed -e '
 538 s/^\([0-9]\{4\}\)-\([0-9]\{2\}\)-\([0-9]\{2\}\) \([0-9]\{2\}\):\([0-9]\{2\}\):\([0-9]\{2\}\)\.[0-9]* \(.*\)$/\1-\2-\3 \4:\5:\6 \7/'`"
 539                 export GIT_COMMITTER_DATE="$GIT_AUTHOR_DATE"
 540
 541                 # commit
 542                 treeish=`git write-tree`
 543                 commitish=`git commit-tree $treeish -p $2 < "$TMP_MSG"`
 544                 git update-ref HEAD $commitish
 545
 546                 # mark patch as applied
 547                 git update-ref "refs/patches/$branch/$pname" HEAD
 548
 549                 rm -f "$TMP_MSG"
 550         )
 551 }
 552
 553 # usage: push_patch patchname [bail_action]
 554 push_patch()
 555 {
 556         __push_patch_bail=0
 557
 558         (
 559                 TMP_LOG=`get_tmp_file log`
 560
 561                 p="$GUILT_DIR/$branch/$1"
 562                 pname="$1"
 563                 bail_action="$2"
 564                 reject="--reject"
 565
 566                 assert_head_check
 567                 cd_to_toplevel
 568
 569                 # apply the patch if and only if there is something to apply
 570                 if [ `git apply --numstat "$p" | wc -l` -gt 0 ]; then
 571                         if [ "$bail_action" = abort ]; then
 572                                 reject=""
 573                         fi
 574                         git apply -C$guilt_push_diff_context --index \
 575                                 $reject "$p" > /dev/null 2> "$TMP_LOG"
 576                         __push_patch_bail=$?
 577
 578                         if [ $__push_patch_bail -ne 0 ]; then
 579                                 cat "$TMP_LOG" >&2
 580                                 if [ "$bail_action" = "abort" ]; then
 581                                         rm -f "$TMP_LOG" "$TMP_MSG"
 582                                         return $__push_patch_bail
 583                                 fi
 584                         fi
 585                 fi
 586
 587                 commit "$pname" HEAD
 588
 589                 echo "$pname" >> $applied
 590
 591                 rm -f "$TMP_LOG"
 592         )
 593
 594         # sub-shell funky-ness
 595         __push_patch_bail=$?
 596
 597         return $__push_patch_bail
 598 }
 599
 600 # usage: must_commit_first
 601 must_commit_first()
 602 {
 603         git update-index --refresh --unmerged -q > /dev/null
 604         [ `git diff-files | wc -l` -eq 0 ] || return $?
 605         [ `git diff-index HEAD | wc -l` -eq 0 ]
 606         return $?
 607 }
 608
 609 # usage: fold_patch patchname
 610 fold_patch()
 611 {
 612         set -- "$1" "`get_top`"
 613
 614         assert_head_check
 615
 616         push_patch "$1"
 617
 618         # merge the patch headers
 619         (
 620                 pcur="$GUILT_DIR/$branch/$2"
 621                 pnext="$GUILT_DIR/$branch/$1"
 622                 TMP_CUR=`get_tmp_file diff-cur`
 623                 TMP_NEXT=`get_tmp_file diff-next`
 624                 TMP_DIFF=`get_tmp_file diff`
 625                 do_get_full_header "$pcur" > "$TMP_CUR"
 626                 do_get_full_header "$pnext" > "$TMP_NEXT"
 627                 do_get_patch "$pcur" > "$TMP_DIFF"
 628
 629                 case "`stat -c %s \"$TMP_CUR\"`,`stat -c %s \"$TMP_NEXT\"`" in
 630                         *,0)
 631                                 # since the new patch header is empty, we
 632                                 # don't have to do anything
 633                                 ;;
 634                         0,*)
 635                                 # current is empty; new is not
 636                                 mv "$pcur" "$pcur~"
 637                                 cat "$TMP_NEXT" > "$pcur"
 638                                 cat "$TMP_DIFF" >> "$pcur"
 639                                 ;;
 640                         *,*)
 641                                 mv "$pcur" "$pcur~"
 642                                 cat "$TMP_CUR" > "$pcur"
 643                                 echo >> "$pcur"
 644                                 echo "Header from folded patch '$1':" >> "$pcur"
 645                                 echo >> "$pcur"
 646                                 cat "$TMP_NEXT" >> "$pcur"
 647                                 cat "$TMP_DIFF" >> "$pcur"
 648                                 ;;
 649                 esac
 650
 651                 rm -f "$TMP_CUR" "$TMP_NEXT" "$TMP_DIFF"
 652         )
 653
 654         __refresh_patch "$2" HEAD^^ 2 "" ""
 655
 656         series_remove_patch "$1"
 657 }
 658
 659 # usage: refresh_patch patchname gengitdiff incldiffstat
 660 refresh_patch()
 661 {
 662         __refresh_patch "$1" HEAD^ 1 "$2" "$3"
 663 }
 664
 665 # usage: __refresh_patch patchname commitish number_of_commits gengitdiff
 666 #                        incldiffstat
 667 __refresh_patch()
 668 {
 669         assert_head_check
 670
 671         (
 672                 TMP_DIFF=`get_tmp_file diff`
 673
 674                 cd_to_toplevel
 675                 p="$GUILT_DIR/$branch/$1"
 676                 pname="$1"
 677
 678                 # get the patch header
 679                 do_get_full_header "$p" > "$TMP_DIFF"
 680
 681                 [ ! -z "$4" ] && diffopts="-C -M --find-copies-harder"
 682
 683                 if [ -n "$5" -o $diffstat = "true" ]; then
 684                         (
 685                                 echo "---"
 686                                 git diff --stat $diffopts "$2"
 687                                 echo ""
 688                         ) >> "$TMP_DIFF"
 689                 fi
 690
 691                 # get the new patch
 692                 git diff $diffopts "$2" >> "$TMP_DIFF"
 693
 694                 # move the new patch in
 695                 mv "$p" "$p~"
 696                 mv "$TMP_DIFF" $p
 697
 698                 # commit
 699                 commit "$pname" "HEAD~$3"
 700
 701                 # drop folded patches
 702                 N=`expr "$3" - 1`
 703
 704                 # remove the patches refs
 705                 tail -$N < "$applied" | remove_patch_refs
 706
 707                 head -n "-$N" < "$applied" > "$applied.tmp"
 708                 mv "$applied.tmp" "$applied"
 709         )
 710 }
 711
 712 # usage: munge_hash_range <hash range>
 713 #
 714 # this means:
 715 #       <hash>                  - one commit
 716 #       <hash>..                - hash until head (excludes hash, includes head)
 717 #       ..<hash>                - until hash (includes hash)
 718 #       <hash1>..<hash2>        - from hash to hash (inclusive)
 719 #
 720 # The output of this function is suitable to be passed to "git rev-list"
 721 munge_hash_range()
 722 {
 723         case "$1" in
 724                 *..*..*|*\ *)
 725                         # double .. or space is illegal
 726                         return 1;;
 727                 ..*)
 728                         # e.g., "..v0.10"
 729                         echo ${1#..};;
 730                 *..)
 731                         # e.g., "v0.19.."
 732                         echo ${1%..}..HEAD;;
 733                 *..*)
 734                         # e.g., "v0.19-rc1..v0.19"
 735                         echo ${1%%..*}..${1#*..};;
 736                 ?*)
 737                         # e.g., "v0.19"
 738                         echo $1^..$1;;
 739                 *)  # empty
 740                         return 1;;
 741         esac
 742         return 0
 743 }
 744
 745 # usage: get_tmp_file <prefix> [<opts>]
 746 #
 747 # Get a unique filename and create the file in a non-racy way
 748 get_tmp_file()
 749 {
 750         while true; do
 751                 mktemp $2 "/tmp/guilt.$1.XXXXXXXXXXXXXXX" && break
 752         done
 753 }
 754
 755 # usage: guilt_hook <hook name> <args....>
 756 guilt_hook()
 757 {
 758         __hookname="$1"
 759         [ ! -x "$GIT_DIR/hooks/guilt/$__hookname" ] && return 0
 760
 761         shift
 762
 763         "$GIT_DIR/hooks/guilt/$__hookname" "$@"
 764         return $?
 765 }
 766
 767 #
 768 # Some constants
 769 #
 770
 771 # used for: git apply -C <val>
 772 guilt_push_diff_context=1
 773
 774 # default diffstat value: true or false
 775 DIFFSTAT_DEFAULT="false"
 776
 777 #
 778 # Parse any part of .git/config that belongs to us
 779 #
 780
 781 # generate diffstat?
 782 diffstat=`git config --bool guilt.diffstat`
 783 [ -z "$diffstat" ] && diffstat=$DIFFSTAT_DEFAULT
 784
 785 #
 786 # The following gets run every time this file is source'd
 787 #
 788
 789 GUILT_DIR="$GIT_DIR/patches"
 790
 791 branch=`get_branch`
 792
 793 # most of the time we want to verify that the repo's branch has been
 794 # initialized, but every once in a blue moon (e.g., we want to run guilt-init),
 795 # we must avoid the checks
 796 if [ -z "$DO_NOT_CHECK_BRANCH_EXISTENCE" ]; then
 797         verify_branch
 798
 799         # do not check the status file format (guilt-repair needs this,
 800         # otherwise nothing can do what's necessary to bring the repo into a
 801         # useable state)
 802         if [ -z "$DO_NOT_CHECK_STATUS_FILE_FORMAT" ]; then
 803                 [ -s "$GIT_DIR/patches/$branch/status" ] &&
 804                         grep "^[0-9a-f]\{40\}:" "$GIT_DIR/patches/$branch/status" > /dev/null &&
 805                         die "Status file appears to use old format, try guilt-repair --status"
 806         fi
 807 fi
 808
 809 # very useful files
 810 series="$GUILT_DIR/$branch/series"
 811 applied="$GUILT_DIR/$branch/status"
 812 guards_file="$GUILT_DIR/$branch/guards"
 813
 814 # determine a pager to use for anything interactive (fall back to more)
 815 pager="more"
 816 [ ! -z "$PAGER" ] && pager="$PAGER"