travis.sh

   1 #!/bin/sh
   2
   3 #
   4 # Copyright (c) 2018 Vojtech Horky
   5 # All rights reserved.
   6 #
   7 # Redistribution and use in source and binary forms, with or without
   8 # modification, are permitted provided that the following conditions
   9 # are met:
  10 #
  11 # - Redistributions of source code must retain the above copyright
  12 #   notice, this list of conditions and the following disclaimer.
  13 # - Redistributions in binary form must reproduce the above copyright
  14 #   notice, this list of conditions and the following disclaimer in the
  15 #   documentation and/or other materials provided with the distribution.
  16 # - The name of the author may not be used to endorse or promote products
  17 #   derived from this software without specific prior written permission.
  18 #
  19 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  20 # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  21 # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  22 # IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  23 # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  24 # NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  25 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  26 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  27 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  28 # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  29 #
  30
  31 #
  32 # This is wrapper script for testing build of HelenOS harbours under
  33 # Travis CI [1].
  34 #
  35 # You probably do not want to run this script directly. If you wish to test
  36 # that HelenOS harbours builds for all architectures, consider using either
  37 # our CI solution [2].
  38 #
  39 # [1] https://travis-ci.org/
  40 # [2] http://www.helenos.org/wiki/CI
  41 #
  42
  43 H_ARCH_CONFIG_CROSS_TARGET=2
  44
  45 h_get_arch_config_space() {
  46     cat <<'EOF_CONFIG_SPACE'
  47 amd64:amd64-helenos
  48 arm32/beagleboardxm:arm-helenos
  49 arm32/beaglebone:arm-helenos
  50 arm32/gta02:arm-helenos
  51 arm32/integratorcp:arm-helenos
  52 arm32/raspberrypi:arm-helenos
  53 ia32:i686-helenos
  54 ia64/i460GX:ia64-helenos
  55 ia64/ski:ia64-helenos
  56 mips32/malta-be:mips-helenos
  57 mips32/malta-le:mipsel-helenos
  58 mips32/msim:mipsel-helenos
  59 ppc32:ppc-helenos
  60 sparc64/niagara:sparc64-helenos
  61 sparc64/ultra:sparc64-helenos
  62 EOF_CONFIG_SPACE
  63 }
  64
  65 h_get_arch_config() {
  66     h_get_arch_config_space | grep "^$H_ARCH:" | cut '-d:' -f "$1"
  67 }
  68
  69
  70
  71 #
  72 # main script starts here
  73 #
  74
  75 # Check we are actually running inside Travis
  76 if [ -z "$TRAVIS" ]; then
  77     echo "\$TRAVIS env not set. Are you running me inside Travis?" >&2
  78     exit 5
  79 fi
  80
  81 # Check HelenOS configuration was set-up
  82 if [ -z "$H_ARCH" ]; then
  83     echo "\$H_ARCH env not set. Are you running me inside Travis?" >&2
  84     exit 5
  85 fi
  86
  87 # Check HARBOUR was definied
  88 if [ -z "$H_HARBOUR" ]; then
  89     echo "\$H_HARBOUR env not set. Are you running me inside Travis?" >&2
  90     exit 5
  91 fi
  92
  93 # Check cross-compiler target
  94 H_CROSS_TARGET=`h_get_arch_config $H_ARCH_CONFIG_CROSS_TARGET`
  95 if [ -z "$H_CROSS_TARGET" ]; then
  96     echo "No suitable cross-target found for '$H_ARCH.'" >&2
  97     exit 1
  98 fi
  99
 100 # Default HelenOS repository
 101 if [ -z "$H_HELENOS_REPOSITORY" ]; then
 102     H_HELENOS_REPOSITORY="https://github.com/HelenOS/helenos.git"
 103 fi
 104
 105 if [ "$1" = "help" ]; then
 106     echo
 107     echo "Following variables needs to be set prior running this script."
 108     echo "Example settings follows:"
 109     echo
 110     echo "export H_ARCH=$H_ARCH"
 111     echo "export H_ARCH=$H_HARBOUR"
 112     echo "export TRAVIS_BUILD_ID=`date +%s`"
 113     echo
 114     exit 0
 115
 116 elif [ "$1" = "install" ]; then
 117     set -x
 118
 119     # Fetch and install cross-compiler
 120     wget "https://helenos.s3.amazonaws.com/toolchain/$H_CROSS_TARGET.tar.xz" -O "/tmp/$H_CROSS_TARGET.tar.xz" || exit 1
 121     sudo tar -xJ -C "/" -f "/tmp/$H_CROSS_TARGET.tar.xz" || exit 1
 122     exit 0
 123
 124 elif [ "$1" = "run" ]; then
 125     set -x
 126
 127     H_HARBOURS_HOME=`pwd`
 128
 129     cd "$HOME" || exit 1
 130
 131     git clone --depth 10 "$H_HELENOS_REPOSITORY" helenos || exit 1
 132
 133     mkdir "build-$TRAVIS_BUILD_ID" || exit 1
 134     cd "build-$TRAVIS_BUILD_ID" || exit 1
 135     git clone "$HOME/helenos" helenos || exit 1
 136     mkdir build || exit 1
 137     cd build || exit 1
 138     "$H_HARBOURS_HOME/hsct.sh" init "$HOME/build-$TRAVIS_BUILD_ID/helenos" $H_ARCH || exit 1
 139
 140     # We cannot flood the output as Travis has limit of maximum output size
 141     # (reason is to prevent endless stacktraces going forever). But also Travis
 142     # kills a job that does not print anything for a while.
 143     #
 144     # So we store the full output into a file and print single dot for each line.
 145     # As pipe tends to hide errors we check the success by checking that archive
 146     # exists.
 147     #
 148     "$H_HARBOURS_HOME/hsct.sh" archive "$H_HARBOUR" 2>&1 | tee build.log | awk '// {printf "."}'
 149
 150     tail -n 1000 build.log
 151
 152     test -s "archives/$H_HARBOUR.tar.xz"
 153
 154     RET="$?"
 155     if [ $RET -ne 0 ]; then
 156         exit $RET
 157     fi
 158
 159     ls -lh archives
 160
 161     set +x
 162
 163     echo "Looks good, $H_HARBOUR built on $H_ARCH."
 164     echo
 165 else
 166     echo "Invalid action specified." >&2
 167     exit 5
 168 fi