2 * SGI IOC3 master driver and IRQ demuxer
4 * Copyright (c) 2005 Stanislaw Skowronek <skylark@linux-mips.org>
5 * Heavily based on similar work by:
6 * Brent Casavant <bcasavan@sgi.com> - IOC4 master driver
7 * Pat Gefre <pfg@sgi.com> - IOC3 serial port IRQ demuxer
10 #include <linux/errno.h>
11 #include <linux/module.h>
12 #include <linux/pci.h>
13 #include <linux/dma-mapping.h>
14 #include <linux/interrupt.h>
15 #include <linux/spinlock.h>
16 #include <linux/delay.h>
17 #include <linux/ioc3.h>
18 #include <linux/rwsem.h>
20 #define IOC3_PCI_SIZE 0x100000
22 static LIST_HEAD(ioc3_devices
);
23 static int ioc3_counter
;
24 static DECLARE_RWSEM(ioc3_devices_rwsem
);
26 static struct ioc3_submodule
*ioc3_submodules
[IOC3_MAX_SUBMODULES
];
27 static struct ioc3_submodule
*ioc3_ethernet
;
28 static DEFINE_RWLOCK(ioc3_submodules_lock
);
30 /* NIC probing code */
32 #define GPCR_MLAN_EN 0x00200000 /* enable MCR to pin 8 */
34 static inline unsigned mcr_pack(unsigned pulse
, unsigned sample
)
36 return (pulse
<< 10) | (sample
<< 2);
39 static int nic_wait(struct ioc3_driver_data
*idd
)
44 mcr
= readl(&idd
->vma
->mcr
);
50 static int nic_reset(struct ioc3_driver_data
*idd
)
55 local_irq_save(flags
);
56 writel(mcr_pack(500, 65), &idd
->vma
->mcr
);
57 presence
= nic_wait(idd
);
58 local_irq_restore(flags
);
65 static int nic_read_bit(struct ioc3_driver_data
*idd
)
70 local_irq_save(flags
);
71 writel(mcr_pack(6, 13), &idd
->vma
->mcr
);
72 result
= nic_wait(idd
);
73 local_irq_restore(flags
);
80 static void nic_write_bit(struct ioc3_driver_data
*idd
, int bit
)
83 writel(mcr_pack(6, 110), &idd
->vma
->mcr
);
85 writel(mcr_pack(80, 30), &idd
->vma
->mcr
);
90 static unsigned nic_read_byte(struct ioc3_driver_data
*idd
)
95 for (i
= 0; i
< 8; i
++)
96 result
= (result
>> 1) | (nic_read_bit(idd
) << 7);
101 static void nic_write_byte(struct ioc3_driver_data
*idd
, int byte
)
105 for (i
= 8; i
; i
--) {
109 nic_write_bit(idd
, bit
);
114 nic_find(struct ioc3_driver_data
*idd
, int *last
, unsigned long addr
)
116 int a
, b
, index
, disc
;
121 nic_write_byte(idd
, 0xF0);
123 /* Algorithm from ``Book of iButton Standards''. */
124 for (index
= 0, disc
= 0; index
< 64; index
++) {
125 a
= nic_read_bit(idd
);
126 b
= nic_read_bit(idd
);
129 printk(KERN_WARNING
"IOC3 NIC search failed.\n");
135 if (index
== *last
) {
136 addr
|= 1UL << index
;
137 } else if (index
> *last
) {
138 addr
&= ~(1UL << index
);
140 } else if ((addr
& (1UL << index
)) == 0)
142 nic_write_bit(idd
, (addr
>>index
)&1);
146 addr
|= 1UL << index
;
148 addr
&= ~(1UL << index
);
149 nic_write_bit(idd
, a
);
157 static void nic_addr(struct ioc3_driver_data
*idd
, unsigned long addr
)
162 nic_write_byte(idd
, 0xF0);
163 for (index
= 0; index
< 64; index
++) {
166 nic_write_bit(idd
, (addr
>>index
)&1);
170 static void crc16_byte(unsigned int *crc
, unsigned char db
)
176 if((db
^(*crc
>>16)) & 1)
183 static unsigned int crc16_area(unsigned char *dbs
, int size
, unsigned int crc
)
186 crc16_byte(&crc
, *(dbs
++));
190 static void crc8_byte(unsigned int *crc
, unsigned char db
)
204 static unsigned int crc8_addr(unsigned long addr
)
207 unsigned int crc
= 0x00;
210 crc8_byte(&crc
, addr
>>(i
<<3));
215 read_redir_page(struct ioc3_driver_data
*idd
, unsigned long addr
, int page
,
216 unsigned char *redir
, unsigned char *data
)
220 while(redir
[page
] != 0xFF) {
221 page
= redir
[page
]^0xFF;
224 printk(KERN_ERR
"IOC3: NIC circular redirection\n");
231 nic_write_byte(idd
, 0xF0);
232 nic_write_byte(idd
, (page
<< 5) & 0xE0);
233 nic_write_byte(idd
, (page
>> 3) & 0x1F);
235 data
[i
] = nic_read_byte(idd
);
236 if(crc16_area(data
, 0x20, 0x0000) == 0x800d)
240 printk(KERN_ERR
"IOC3: CRC error in data page\n");
246 read_redir_map(struct ioc3_driver_data
*idd
, unsigned long addr
,
247 unsigned char *redir
)
249 int i
,j
,loops
= 3,crc_ok
;
255 nic_write_byte(idd
, 0xAA);
256 nic_write_byte(idd
, 0x00);
257 nic_write_byte(idd
, 0x01);
260 redir
[i
+j
] = nic_read_byte(idd
);
261 crc
= crc16_area(redir
+i
, 8, (i
==0)?0x8707:0x0000);
262 crc16_byte(&crc
, nic_read_byte(idd
));
263 crc16_byte(&crc
, nic_read_byte(idd
));
271 printk(KERN_ERR
"IOC3: CRC error in redirection page\n");
276 static void read_nic(struct ioc3_driver_data
*idd
, unsigned long addr
)
278 unsigned char redir
[64];
279 unsigned char data
[64],part
[32];
282 /* read redirections */
283 read_redir_map(idd
, addr
, redir
);
284 /* read data pages */
285 read_redir_page(idd
, addr
, 0, redir
, data
);
286 read_redir_page(idd
, addr
, 1, redir
, data
+32);
287 /* assemble the part # */
290 if(data
[i
+11] != ' ')
291 part
[j
++] = data
[i
+11];
293 if(data
[i
+32] != ' ')
294 part
[j
++] = data
[i
+32];
296 /* skip Octane power supplies */
297 if(!strncmp(part
, "060-0035-", 9))
299 if(!strncmp(part
, "060-0038-", 9))
301 strcpy(idd
->nic_part
, part
);
302 /* assemble the serial # */
306 idd
->nic_serial
[j
++] = data
[i
+1];
307 idd
->nic_serial
[j
] = 0;
310 static void read_mac(struct ioc3_driver_data
*idd
, unsigned long addr
)
313 unsigned char data
[13];
317 nic_write_byte(idd
, 0xF0);
318 nic_write_byte(idd
, 0x00);
319 nic_write_byte(idd
, 0x00);
322 data
[i
] = nic_read_byte(idd
);
323 if(crc16_area(data
, 13, 0x0000) == 0x800d) {
325 idd
->nic_mac
[10-i
] = data
[i
];
330 printk(KERN_ERR
"IOC3: CRC error in MAC address\n");
332 idd
->nic_mac
[i
] = 0x00;
335 static void probe_nic(struct ioc3_driver_data
*idd
)
337 int save
= 0, loops
= 3;
338 unsigned long first
, addr
;
340 writel(GPCR_MLAN_EN
, &idd
->vma
->gpcr_s
);
343 idd
->nic_part
[0] = 0;
344 idd
->nic_serial
[0] = 0;
345 addr
= first
= nic_find(idd
, &save
, 0);
352 switch(addr
& 0xFF) {
363 addr
= nic_find(idd
, &save
, addr
);
369 printk(KERN_ERR
"IOC3: CRC error in NIC address\n");
374 static void write_ireg(struct ioc3_driver_data
*idd
, uint32_t val
, int which
)
378 spin_lock_irqsave(&idd
->ir_lock
, flags
);
381 writel(val
, &idd
->vma
->sio_ies
);
384 writel(val
, &idd
->vma
->sio_iec
);
387 spin_unlock_irqrestore(&idd
->ir_lock
, flags
);
389 static inline uint32_t get_pending_intrs(struct ioc3_driver_data
*idd
)
394 spin_lock_irqsave(&idd
->ir_lock
, flag
);
395 intrs
= readl(&idd
->vma
->sio_ir
);
396 intrs
&= readl(&idd
->vma
->sio_ies
);
397 spin_unlock_irqrestore(&idd
->ir_lock
, flag
);
401 static irqreturn_t
ioc3_intr_io(int irq
, void *arg
, struct pt_regs
*regs
)
404 struct ioc3_driver_data
*idd
= (struct ioc3_driver_data
*)arg
;
406 unsigned int pending
;
408 read_lock_irqsave(&ioc3_submodules_lock
, flags
);
410 if(idd
->dual_irq
&& readb(&idd
->vma
->eisr
)) {
411 /* send Ethernet IRQ to the driver */
412 if(ioc3_ethernet
&& idd
->active
[ioc3_ethernet
->id
] &&
413 ioc3_ethernet
->intr
) {
414 handled
= handled
&& !ioc3_ethernet
->intr(ioc3_ethernet
,
418 pending
= get_pending_intrs(idd
); /* look at the IO IRQs */
420 for(id
=0;id
<IOC3_MAX_SUBMODULES
;id
++) {
421 if(idd
->active
[id
] && ioc3_submodules
[id
]
422 && (pending
& ioc3_submodules
[id
]->irq_mask
)
423 && ioc3_submodules
[id
]->intr
) {
424 write_ireg(idd
, ioc3_submodules
[id
]->irq_mask
,
426 if(!ioc3_submodules
[id
]->intr(ioc3_submodules
[id
],
427 idd
, pending
& ioc3_submodules
[id
]->irq_mask
,
429 pending
&= ~ioc3_submodules
[id
]->irq_mask
;
430 if (ioc3_submodules
[id
]->reset_mask
)
431 write_ireg(idd
, ioc3_submodules
[id
]->irq_mask
,
435 read_unlock_irqrestore(&ioc3_submodules_lock
, flags
);
438 "IOC3: Pending IRQs 0x%08x discarded and disabled\n",pending
);
439 write_ireg(idd
, pending
, IOC3_W_IEC
);
442 return handled
?IRQ_HANDLED
:IRQ_NONE
;
445 static irqreturn_t
ioc3_intr_eth(int irq
, void *arg
, struct pt_regs
*regs
)
448 struct ioc3_driver_data
*idd
= (struct ioc3_driver_data
*)arg
;
453 read_lock_irqsave(&ioc3_submodules_lock
, flags
);
454 if(ioc3_ethernet
&& idd
->active
[ioc3_ethernet
->id
]
455 && ioc3_ethernet
->intr
)
456 handled
= handled
&& !ioc3_ethernet
->intr(ioc3_ethernet
, idd
, 0,
458 read_unlock_irqrestore(&ioc3_submodules_lock
, flags
);
459 return handled
?IRQ_HANDLED
:IRQ_NONE
;
462 void ioc3_enable(struct ioc3_submodule
*is
,
463 struct ioc3_driver_data
*idd
, unsigned int irqs
)
465 write_ireg(idd
, irqs
& is
->irq_mask
, IOC3_W_IES
);
468 void ioc3_ack(struct ioc3_submodule
*is
, struct ioc3_driver_data
*idd
,
471 writel(irqs
& is
->irq_mask
, &idd
->vma
->sio_ir
);
474 void ioc3_disable(struct ioc3_submodule
*is
,
475 struct ioc3_driver_data
*idd
, unsigned int irqs
)
477 write_ireg(idd
, irqs
& is
->irq_mask
, IOC3_W_IEC
);
480 void ioc3_gpcr_set(struct ioc3_driver_data
*idd
, unsigned int val
)
483 spin_lock_irqsave(&idd
->gpio_lock
, flags
);
484 writel(val
, &idd
->vma
->gpcr_s
);
485 spin_unlock_irqrestore(&idd
->gpio_lock
, flags
);
488 /* Keep it simple, stupid! */
489 static int find_slot(void **tab
, int max
)
498 /* Register an IOC3 submodule */
499 int ioc3_register_submodule(struct ioc3_submodule
*is
)
501 struct ioc3_driver_data
*idd
;
505 write_lock_irqsave(&ioc3_submodules_lock
, flags
);
506 alloc_id
= find_slot((void **)ioc3_submodules
, IOC3_MAX_SUBMODULES
);
508 ioc3_submodules
[alloc_id
] = is
;
510 if(ioc3_ethernet
==NULL
)
514 "IOC3 Ethernet module already registered!\n");
517 write_unlock_irqrestore(&ioc3_submodules_lock
, flags
);
520 printk(KERN_WARNING
"Increase IOC3_MAX_SUBMODULES!\n");
526 /* Initialize submodule for each IOC3 */
530 down_read(&ioc3_devices_rwsem
);
531 list_for_each_entry(idd
, &ioc3_devices
, list
) {
532 /* set to 1 for IRQs in probe */
533 idd
->active
[alloc_id
] = 1;
534 idd
->active
[alloc_id
] = !is
->probe(is
, idd
);
536 up_read(&ioc3_devices_rwsem
);
541 /* Unregister an IOC3 submodule */
542 void ioc3_unregister_submodule(struct ioc3_submodule
*is
)
544 struct ioc3_driver_data
*idd
;
547 write_lock_irqsave(&ioc3_submodules_lock
, flags
);
548 if(ioc3_submodules
[is
->id
]==is
)
549 ioc3_submodules
[is
->id
]=NULL
;
552 "IOC3 submodule %s has wrong ID.\n",is
->name
);
553 if(ioc3_ethernet
==is
)
554 ioc3_ethernet
= NULL
;
555 write_unlock_irqrestore(&ioc3_submodules_lock
, flags
);
557 /* Remove submodule for each IOC3 */
558 down_read(&ioc3_devices_rwsem
);
559 list_for_each_entry(idd
, &ioc3_devices
, list
)
560 if(idd
->active
[is
->id
]) {
562 if(is
->remove(is
, idd
))
564 "%s: IOC3 submodule %s remove failed "
566 __FUNCTION__
, module_name(is
->owner
),
567 pci_name(idd
->pdev
));
568 idd
->active
[is
->id
] = 0;
570 write_ireg(idd
, is
->irq_mask
, IOC3_W_IEC
);
572 up_read(&ioc3_devices_rwsem
);
575 /*********************
576 * Device management *
577 *********************/
580 ioc3_class_names
[]={"unknown", "IP27 BaseIO", "IP30 system", "MENET 1/2/3",
581 "MENET 4", "CADduo", "Altix Serial"};
583 static int ioc3_class(struct ioc3_driver_data
*idd
)
585 int res
= IOC3_CLASS_NONE
;
586 /* NIC-based logic */
587 if(!strncmp(idd
->nic_part
, "030-0891-", 9))
588 res
= IOC3_CLASS_BASE_IP30
;
589 if(!strncmp(idd
->nic_part
, "030-1155-", 9))
590 res
= IOC3_CLASS_CADDUO
;
591 if(!strncmp(idd
->nic_part
, "030-1657-", 9))
592 res
= IOC3_CLASS_SERIAL
;
593 if(!strncmp(idd
->nic_part
, "030-1664-", 9))
594 res
= IOC3_CLASS_SERIAL
;
595 /* total random heuristics */
596 #ifdef CONFIG_SGI_IP27
597 if(!idd
->nic_part
[0])
598 res
= IOC3_CLASS_BASE_IP27
;
600 /* print educational message */
601 printk(KERN_INFO
"IOC3 part: [%s], serial: [%s] => class %s\n",
602 idd
->nic_part
, idd
->nic_serial
, ioc3_class_names
[res
]);
605 /* Adds a new instance of an IOC3 card */
606 static int ioc3_probe(struct pci_dev
*pdev
, const struct pci_device_id
*pci_id
)
608 struct ioc3_driver_data
*idd
;
612 /* Enable IOC3 and take ownership of it */
613 if ((ret
= pci_enable_device(pdev
))) {
615 "%s: Failed to enable IOC3 device for pci_dev %s.\n",
616 __FUNCTION__
, pci_name(pdev
));
619 pci_set_master(pdev
);
622 ret
= pci_set_dma_mask(pdev
, DMA_64BIT_MASK
);
624 ret
= pci_set_consistent_dma_mask(pdev
, DMA_64BIT_MASK
);
626 printk(KERN_WARNING
"%s: Unable to obtain 64 bit DMA "
627 "for consistent allocations\n",
633 /* Set up per-IOC3 data */
634 idd
= kmalloc(sizeof(struct ioc3_driver_data
), GFP_KERNEL
);
637 "%s: Failed to allocate IOC3 data for pci_dev %s.\n",
638 __FUNCTION__
, pci_name(pdev
));
642 memset(idd
, 0, sizeof(struct ioc3_driver_data
));
643 spin_lock_init(&idd
->ir_lock
);
644 spin_lock_init(&idd
->gpio_lock
);
647 /* Map all IOC3 registers. These are shared between subdevices
648 * so the main IOC3 module manages them.
650 idd
->pma
= pci_resource_start(pdev
, 0);
653 "%s: Unable to find IOC3 resource "
655 __FUNCTION__
, pci_name(pdev
));
659 if (!request_region(idd
->pma
, IOC3_PCI_SIZE
, "ioc3")) {
661 "%s: Unable to request IOC3 region "
663 __FUNCTION__
, pci_name(pdev
));
667 idd
->vma
= ioremap(idd
->pma
, IOC3_PCI_SIZE
);
670 "%s: Unable to remap IOC3 region "
672 __FUNCTION__
, pci_name(pdev
));
674 goto out_misc_region
;
677 /* Track PCI-device specific data */
678 pci_set_drvdata(pdev
, idd
);
679 down_write(&ioc3_devices_rwsem
);
680 list_add_tail(&idd
->list
, &ioc3_devices
);
681 idd
->id
= ioc3_counter
++;
682 up_write(&ioc3_devices_rwsem
);
684 idd
->gpdr_shadow
= readl(&idd
->vma
->gpdr
);
686 /* Read IOC3 NIC contents */
689 /* Detect IOC3 class */
690 idd
->class = ioc3_class(idd
);
692 /* Initialize IOC3 */
693 pci_read_config_dword(pdev
, PCI_COMMAND
, &pcmd
);
694 pci_write_config_dword(pdev
, PCI_COMMAND
,
695 pcmd
| PCI_COMMAND_MEMORY
|
696 PCI_COMMAND_PARITY
| PCI_COMMAND_SERR
|
697 PCI_SCR_DROP_MODE_EN
);
699 write_ireg(idd
, ~0, IOC3_W_IEC
);
700 writel(~0, &idd
->vma
->sio_ir
);
703 if(idd
->class == IOC3_CLASS_BASE_IP30
704 || idd
->class == IOC3_CLASS_BASE_IP27
) {
705 writel(0, &idd
->vma
->eier
);
706 writel(~0, &idd
->vma
->eisr
);
709 if (!request_irq(pdev
->irq
, ioc3_intr_eth
, IRQF_SHARED
,
710 "ioc3-eth", (void *)idd
)) {
711 idd
->irq_eth
= pdev
->irq
;
714 "%s : request_irq fails for IRQ 0x%x\n ",
715 __FUNCTION__
, pdev
->irq
);
717 if (!request_irq(pdev
->irq
+2, ioc3_intr_io
, IRQF_SHARED
,
718 "ioc3-io", (void *)idd
)) {
719 idd
->irq_io
= pdev
->irq
+2;
722 "%s : request_irq fails for IRQ 0x%x\n ",
723 __FUNCTION__
, pdev
->irq
+2);
726 if (!request_irq(pdev
->irq
, ioc3_intr_io
, IRQF_SHARED
,
727 "ioc3", (void *)idd
)) {
728 idd
->irq_io
= pdev
->irq
;
731 "%s : request_irq fails for IRQ 0x%x\n ",
732 __FUNCTION__
, pdev
->irq
);
736 /* Add this IOC3 to all submodules */
737 for(id
=0;id
<IOC3_MAX_SUBMODULES
;id
++)
738 if(ioc3_submodules
[id
] && ioc3_submodules
[id
]->probe
) {
740 idd
->active
[id
] = !ioc3_submodules
[id
]->probe
741 (ioc3_submodules
[id
], idd
);
744 printk(KERN_INFO
"IOC3 Master Driver loaded for %s\n", pci_name(pdev
));
749 release_region(idd
->pma
, IOC3_PCI_SIZE
);
753 pci_disable_device(pdev
);
758 /* Removes a particular instance of an IOC3 card. */
759 static void ioc3_remove(struct pci_dev
*pdev
)
762 struct ioc3_driver_data
*idd
;
764 idd
= pci_get_drvdata(pdev
);
766 /* Remove this IOC3 from all submodules */
767 for(id
=0;id
<IOC3_MAX_SUBMODULES
;id
++)
768 if(idd
->active
[id
]) {
769 if(ioc3_submodules
[id
] && ioc3_submodules
[id
]->remove
)
770 if(ioc3_submodules
[id
]->remove(ioc3_submodules
[id
],
773 "%s: IOC3 submodule 0x%s remove failed "
776 module_name(ioc3_submodules
[id
]->owner
),
781 /* Clear and disable all IRQs */
782 write_ireg(idd
, ~0, IOC3_W_IEC
);
783 writel(~0, &idd
->vma
->sio_ir
);
785 /* Release resources */
786 free_irq(idd
->irq_io
, (void *)idd
);
788 free_irq(idd
->irq_eth
, (void *)idd
);
790 release_region(idd
->pma
, IOC3_PCI_SIZE
);
792 /* Disable IOC3 and relinquish */
793 pci_disable_device(pdev
);
795 /* Remove and free driver data */
796 down_write(&ioc3_devices_rwsem
);
797 list_del(&idd
->list
);
798 up_write(&ioc3_devices_rwsem
);
802 static struct pci_device_id ioc3_id_table
[] = {
803 {PCI_VENDOR_ID_SGI
, PCI_DEVICE_ID_SGI_IOC3
, PCI_ANY_ID
, PCI_ANY_ID
},
807 static struct pci_driver ioc3_driver
= {
809 .id_table
= ioc3_id_table
,
811 .remove
= ioc3_remove
,
814 MODULE_DEVICE_TABLE(pci
, ioc3_id_table
);
816 /*********************
817 * Module management *
818 *********************/
821 static int __devinit
ioc3_init(void)
823 if (ia64_platform_is("sn2"))
824 return pci_register_driver(&ioc3_driver
);
829 static void __devexit
ioc3_exit(void)
831 pci_unregister_driver(&ioc3_driver
);
834 module_init(ioc3_init
);
835 module_exit(ioc3_exit
);
837 MODULE_AUTHOR("Stanislaw Skowronek <skylark@linux-mips.org>");
838 MODULE_DESCRIPTION("PCI driver for SGI IOC3");
839 MODULE_LICENSE("GPL");
841 EXPORT_SYMBOL_GPL(ioc3_register_submodule
);
842 EXPORT_SYMBOL_GPL(ioc3_unregister_submodule
);
843 EXPORT_SYMBOL_GPL(ioc3_ack
);
844 EXPORT_SYMBOL_GPL(ioc3_gpcr_set
);
845 EXPORT_SYMBOL_GPL(ioc3_disable
);
846 EXPORT_SYMBOL_GPL(ioc3_enable
);