[NETFILTER]: ip6table_mangle: reroute when nfmark changes in NF_IP6_LOCAL_OUT
[hh.org.git] / drivers / char / epca.c
blob86d290e9f307044041fed353cf6bca3ed0cc44cc
1 /*
4 Copyright (C) 1996 Digi International.
6 For technical support please email digiLinux@dgii.com or
7 call Digi tech support at (612) 912-3456
9 ** This driver is no longer supported by Digi **
11 Much of this design and code came from epca.c which was
12 copyright (C) 1994, 1995 Troy De Jongh, and subsquently
13 modified by David Nugent, Christoph Lameter, Mike McLagan.
15 This program is free software; you can redistribute it and/or modify
16 it under the terms of the GNU General Public License as published by
17 the Free Software Foundation; either version 2 of the License, or
18 (at your option) any later version.
20 This program is distributed in the hope that it will be useful,
21 but WITHOUT ANY WARRANTY; without even the implied warranty of
22 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 GNU General Public License for more details.
25 You should have received a copy of the GNU General Public License
26 along with this program; if not, write to the Free Software
27 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
29 --------------------------------------------------------------------------- */
30 /* See README.epca for change history --DAT*/
33 #include <linux/module.h>
34 #include <linux/kernel.h>
35 #include <linux/types.h>
36 #include <linux/init.h>
37 #include <linux/serial.h>
38 #include <linux/delay.h>
39 #include <linux/ctype.h>
40 #include <linux/tty.h>
41 #include <linux/tty_flip.h>
42 #include <linux/slab.h>
43 #include <linux/ioport.h>
44 #include <linux/interrupt.h>
45 #include <asm/uaccess.h>
46 #include <asm/io.h>
47 #include <linux/spinlock.h>
48 #include <linux/pci.h>
49 #include "digiPCI.h"
52 #include "digi1.h"
53 #include "digiFep1.h"
54 #include "epca.h"
55 #include "epcaconfig.h"
57 /* ---------------------- Begin defines ------------------------ */
59 #define VERSION "1.3.0.1-LK2.6"
61 /* This major needs to be submitted to Linux to join the majors list */
63 #define DIGIINFOMAJOR 35 /* For Digi specific ioctl */
66 #define MAXCARDS 7
67 #define epcaassert(x, msg) if (!(x)) epca_error(__LINE__, msg)
69 #define PFX "epca: "
71 /* ----------------- Begin global definitions ------------------- */
73 static int nbdevs, num_cards, liloconfig;
74 static int digi_poller_inhibited = 1 ;
76 static int setup_error_code;
77 static int invalid_lilo_config;
79 /* The ISA boards do window flipping into the same spaces so its only sane
80 with a single lock. It's still pretty efficient */
82 static DEFINE_SPINLOCK(epca_lock);
84 /* -----------------------------------------------------------------------
85 MAXBOARDS is typically 12, but ISA and EISA cards are restricted to
86 7 below.
87 --------------------------------------------------------------------------*/
88 static struct board_info boards[MAXBOARDS];
91 /* ------------- Begin structures used for driver registeration ---------- */
93 static struct tty_driver *pc_driver;
94 static struct tty_driver *pc_info;
96 /* ------------------ Begin Digi specific structures -------------------- */
98 /* ------------------------------------------------------------------------
99 digi_channels represents an array of structures that keep track of
100 each channel of the Digi product. Information such as transmit and
101 receive pointers, termio data, and signal definitions (DTR, CTS, etc ...)
102 are stored here. This structure is NOT used to overlay the cards
103 physical channel structure.
104 -------------------------------------------------------------------------- */
106 static struct channel digi_channels[MAX_ALLOC];
108 /* ------------------------------------------------------------------------
109 card_ptr is an array used to hold the address of the
110 first channel structure of each card. This array will hold
111 the addresses of various channels located in digi_channels.
112 -------------------------------------------------------------------------- */
113 static struct channel *card_ptr[MAXCARDS];
115 static struct timer_list epca_timer;
117 /* ---------------------- Begin function prototypes --------------------- */
119 /* ----------------------------------------------------------------------
120 Begin generic memory functions. These functions will be alias
121 (point at) more specific functions dependent on the board being
122 configured.
123 ----------------------------------------------------------------------- */
125 static void memwinon(struct board_info *b, unsigned int win);
126 static void memwinoff(struct board_info *b, unsigned int win);
127 static void globalwinon(struct channel *ch);
128 static void rxwinon(struct channel *ch);
129 static void txwinon(struct channel *ch);
130 static void memoff(struct channel *ch);
131 static void assertgwinon(struct channel *ch);
132 static void assertmemoff(struct channel *ch);
134 /* ---- Begin more 'specific' memory functions for cx_like products --- */
136 static void pcxem_memwinon(struct board_info *b, unsigned int win);
137 static void pcxem_memwinoff(struct board_info *b, unsigned int win);
138 static void pcxem_globalwinon(struct channel *ch);
139 static void pcxem_rxwinon(struct channel *ch);
140 static void pcxem_txwinon(struct channel *ch);
141 static void pcxem_memoff(struct channel *ch);
143 /* ------ Begin more 'specific' memory functions for the pcxe ------- */
145 static void pcxe_memwinon(struct board_info *b, unsigned int win);
146 static void pcxe_memwinoff(struct board_info *b, unsigned int win);
147 static void pcxe_globalwinon(struct channel *ch);
148 static void pcxe_rxwinon(struct channel *ch);
149 static void pcxe_txwinon(struct channel *ch);
150 static void pcxe_memoff(struct channel *ch);
152 /* ---- Begin more 'specific' memory functions for the pc64xe and pcxi ---- */
153 /* Note : pc64xe and pcxi share the same windowing routines */
155 static void pcxi_memwinon(struct board_info *b, unsigned int win);
156 static void pcxi_memwinoff(struct board_info *b, unsigned int win);
157 static void pcxi_globalwinon(struct channel *ch);
158 static void pcxi_rxwinon(struct channel *ch);
159 static void pcxi_txwinon(struct channel *ch);
160 static void pcxi_memoff(struct channel *ch);
162 /* - Begin 'specific' do nothing memory functions needed for some cards - */
164 static void dummy_memwinon(struct board_info *b, unsigned int win);
165 static void dummy_memwinoff(struct board_info *b, unsigned int win);
166 static void dummy_globalwinon(struct channel *ch);
167 static void dummy_rxwinon(struct channel *ch);
168 static void dummy_txwinon(struct channel *ch);
169 static void dummy_memoff(struct channel *ch);
170 static void dummy_assertgwinon(struct channel *ch);
171 static void dummy_assertmemoff(struct channel *ch);
173 /* ------------------- Begin declare functions ----------------------- */
175 static struct channel *verifyChannel(struct tty_struct *);
176 static void pc_sched_event(struct channel *, int);
177 static void epca_error(int, char *);
178 static void pc_close(struct tty_struct *, struct file *);
179 static void shutdown(struct channel *);
180 static void pc_hangup(struct tty_struct *);
181 static void pc_put_char(struct tty_struct *, unsigned char);
182 static int pc_write_room(struct tty_struct *);
183 static int pc_chars_in_buffer(struct tty_struct *);
184 static void pc_flush_buffer(struct tty_struct *);
185 static void pc_flush_chars(struct tty_struct *);
186 static int block_til_ready(struct tty_struct *, struct file *,
187 struct channel *);
188 static int pc_open(struct tty_struct *, struct file *);
189 static void post_fep_init(unsigned int crd);
190 static void epcapoll(unsigned long);
191 static void doevent(int);
192 static void fepcmd(struct channel *, int, int, int, int, int);
193 static unsigned termios2digi_h(struct channel *ch, unsigned);
194 static unsigned termios2digi_i(struct channel *ch, unsigned);
195 static unsigned termios2digi_c(struct channel *ch, unsigned);
196 static void epcaparam(struct tty_struct *, struct channel *);
197 static void receive_data(struct channel *);
198 static int pc_ioctl(struct tty_struct *, struct file *,
199 unsigned int, unsigned long);
200 static int info_ioctl(struct tty_struct *, struct file *,
201 unsigned int, unsigned long);
202 static void pc_set_termios(struct tty_struct *, struct termios *);
203 static void do_softint(void *);
204 static void pc_stop(struct tty_struct *);
205 static void pc_start(struct tty_struct *);
206 static void pc_throttle(struct tty_struct * tty);
207 static void pc_unthrottle(struct tty_struct *tty);
208 static void digi_send_break(struct channel *ch, int msec);
209 static void setup_empty_event(struct tty_struct *tty, struct channel *ch);
210 void epca_setup(char *, int *);
212 static int get_termio(struct tty_struct *, struct termio __user *);
213 static int pc_write(struct tty_struct *, const unsigned char *, int);
214 static int pc_init(void);
215 static int init_PCI(void);
218 /* ------------------------------------------------------------------
219 Table of functions for each board to handle memory. Mantaining
220 parallelism is a *very* good idea here. The idea is for the
221 runtime code to blindly call these functions, not knowing/caring
222 about the underlying hardware. This stuff should contain no
223 conditionals; if more functionality is needed a different entry
224 should be established. These calls are the interface calls and
225 are the only functions that should be accessed. Anyone caught
226 making direct calls deserves what they get.
227 -------------------------------------------------------------------- */
229 static void memwinon(struct board_info *b, unsigned int win)
231 (b->memwinon)(b, win);
234 static void memwinoff(struct board_info *b, unsigned int win)
236 (b->memwinoff)(b, win);
239 static void globalwinon(struct channel *ch)
241 (ch->board->globalwinon)(ch);
244 static void rxwinon(struct channel *ch)
246 (ch->board->rxwinon)(ch);
249 static void txwinon(struct channel *ch)
251 (ch->board->txwinon)(ch);
254 static void memoff(struct channel *ch)
256 (ch->board->memoff)(ch);
258 static void assertgwinon(struct channel *ch)
260 (ch->board->assertgwinon)(ch);
263 static void assertmemoff(struct channel *ch)
265 (ch->board->assertmemoff)(ch);
268 /* ---------------------------------------------------------
269 PCXEM windowing is the same as that used in the PCXR
270 and CX series cards.
271 ------------------------------------------------------------ */
273 static void pcxem_memwinon(struct board_info *b, unsigned int win)
275 outb_p(FEPWIN|win, b->port + 1);
278 static void pcxem_memwinoff(struct board_info *b, unsigned int win)
280 outb_p(0, b->port + 1);
283 static void pcxem_globalwinon(struct channel *ch)
285 outb_p( FEPWIN, (int)ch->board->port + 1);
288 static void pcxem_rxwinon(struct channel *ch)
290 outb_p(ch->rxwin, (int)ch->board->port + 1);
293 static void pcxem_txwinon(struct channel *ch)
295 outb_p(ch->txwin, (int)ch->board->port + 1);
298 static void pcxem_memoff(struct channel *ch)
300 outb_p(0, (int)ch->board->port + 1);
303 /* ----------------- Begin pcxe memory window stuff ------------------ */
305 static void pcxe_memwinon(struct board_info *b, unsigned int win)
307 outb_p(FEPWIN | win, b->port + 1);
310 static void pcxe_memwinoff(struct board_info *b, unsigned int win)
312 outb_p(inb(b->port) & ~FEPMEM,
313 b->port + 1);
314 outb_p(0, b->port + 1);
317 static void pcxe_globalwinon(struct channel *ch)
319 outb_p( FEPWIN, (int)ch->board->port + 1);
322 static void pcxe_rxwinon(struct channel *ch)
324 outb_p(ch->rxwin, (int)ch->board->port + 1);
327 static void pcxe_txwinon(struct channel *ch)
329 outb_p(ch->txwin, (int)ch->board->port + 1);
332 static void pcxe_memoff(struct channel *ch)
334 outb_p(0, (int)ch->board->port);
335 outb_p(0, (int)ch->board->port + 1);
338 /* ------------- Begin pc64xe and pcxi memory window stuff -------------- */
340 static void pcxi_memwinon(struct board_info *b, unsigned int win)
342 outb_p(inb(b->port) | FEPMEM, b->port);
345 static void pcxi_memwinoff(struct board_info *b, unsigned int win)
347 outb_p(inb(b->port) & ~FEPMEM, b->port);
350 static void pcxi_globalwinon(struct channel *ch)
352 outb_p(FEPMEM, ch->board->port);
355 static void pcxi_rxwinon(struct channel *ch)
357 outb_p(FEPMEM, ch->board->port);
360 static void pcxi_txwinon(struct channel *ch)
362 outb_p(FEPMEM, ch->board->port);
365 static void pcxi_memoff(struct channel *ch)
367 outb_p(0, ch->board->port);
370 static void pcxi_assertgwinon(struct channel *ch)
372 epcaassert(inb(ch->board->port) & FEPMEM, "Global memory off");
375 static void pcxi_assertmemoff(struct channel *ch)
377 epcaassert(!(inb(ch->board->port) & FEPMEM), "Memory on");
381 /* ----------------------------------------------------------------------
382 Not all of the cards need specific memory windowing routines. Some
383 cards (Such as PCI) needs no windowing routines at all. We provide
384 these do nothing routines so that the same code base can be used.
385 The driver will ALWAYS call a windowing routine if it thinks it needs
386 to; regardless of the card. However, dependent on the card the routine
387 may or may not do anything.
388 ---------------------------------------------------------------------------*/
390 static void dummy_memwinon(struct board_info *b, unsigned int win)
394 static void dummy_memwinoff(struct board_info *b, unsigned int win)
398 static void dummy_globalwinon(struct channel *ch)
402 static void dummy_rxwinon(struct channel *ch)
406 static void dummy_txwinon(struct channel *ch)
410 static void dummy_memoff(struct channel *ch)
414 static void dummy_assertgwinon(struct channel *ch)
418 static void dummy_assertmemoff(struct channel *ch)
422 /* ----------------- Begin verifyChannel function ----------------------- */
423 static struct channel *verifyChannel(struct tty_struct *tty)
424 { /* Begin verifyChannel */
425 /* --------------------------------------------------------------------
426 This routine basically provides a sanity check. It insures that
427 the channel returned is within the proper range of addresses as
428 well as properly initialized. If some bogus info gets passed in
429 through tty->driver_data this should catch it.
430 --------------------------------------------------------------------- */
431 if (tty) {
432 struct channel *ch = (struct channel *)tty->driver_data;
433 if ((ch >= &digi_channels[0]) && (ch < &digi_channels[nbdevs])) {
434 if (ch->magic == EPCA_MAGIC)
435 return ch;
438 return NULL;
440 } /* End verifyChannel */
442 /* ------------------ Begin pc_sched_event ------------------------- */
444 static void pc_sched_event(struct channel *ch, int event)
446 /* ----------------------------------------------------------------------
447 We call this to schedule interrupt processing on some event. The
448 kernel sees our request and calls the related routine in OUR driver.
449 -------------------------------------------------------------------------*/
450 ch->event |= 1 << event;
451 schedule_work(&ch->tqueue);
452 } /* End pc_sched_event */
454 /* ------------------ Begin epca_error ------------------------- */
456 static void epca_error(int line, char *msg)
458 printk(KERN_ERR "epca_error (Digi): line = %d %s\n",line,msg);
461 /* ------------------ Begin pc_close ------------------------- */
462 static void pc_close(struct tty_struct * tty, struct file * filp)
464 struct channel *ch;
465 unsigned long flags;
466 /* ---------------------------------------------------------
467 verifyChannel returns the channel from the tty struct
468 if it is valid. This serves as a sanity check.
469 ------------------------------------------------------------- */
470 if ((ch = verifyChannel(tty)) != NULL) { /* Begin if ch != NULL */
471 spin_lock_irqsave(&epca_lock, flags);
472 if (tty_hung_up_p(filp)) {
473 spin_unlock_irqrestore(&epca_lock, flags);
474 return;
476 /* Check to see if the channel is open more than once */
477 if (ch->count-- > 1) {
478 /* Begin channel is open more than once */
479 /* -------------------------------------------------------------
480 Return without doing anything. Someone might still be using
481 the channel.
482 ---------------------------------------------------------------- */
483 spin_unlock_irqrestore(&epca_lock, flags);
484 return;
485 } /* End channel is open more than once */
487 /* Port open only once go ahead with shutdown & reset */
488 BUG_ON(ch->count < 0);
490 /* ---------------------------------------------------------------
491 Let the rest of the driver know the channel is being closed.
492 This becomes important if an open is attempted before close
493 is finished.
494 ------------------------------------------------------------------ */
495 ch->asyncflags |= ASYNC_CLOSING;
496 tty->closing = 1;
498 spin_unlock_irqrestore(&epca_lock, flags);
500 if (ch->asyncflags & ASYNC_INITIALIZED) {
501 /* Setup an event to indicate when the transmit buffer empties */
502 setup_empty_event(tty, ch);
503 tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
505 if (tty->driver->flush_buffer)
506 tty->driver->flush_buffer(tty);
508 tty_ldisc_flush(tty);
509 shutdown(ch);
511 spin_lock_irqsave(&epca_lock, flags);
512 tty->closing = 0;
513 ch->event = 0;
514 ch->tty = NULL;
515 spin_unlock_irqrestore(&epca_lock, flags);
517 if (ch->blocked_open) { /* Begin if blocked_open */
518 if (ch->close_delay)
519 msleep_interruptible(jiffies_to_msecs(ch->close_delay));
520 wake_up_interruptible(&ch->open_wait);
521 } /* End if blocked_open */
522 ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED |
523 ASYNC_CLOSING);
524 wake_up_interruptible(&ch->close_wait);
525 } /* End if ch != NULL */
526 } /* End pc_close */
528 /* ------------------ Begin shutdown ------------------------- */
530 static void shutdown(struct channel *ch)
531 { /* Begin shutdown */
533 unsigned long flags;
534 struct tty_struct *tty;
535 struct board_chan __iomem *bc;
537 if (!(ch->asyncflags & ASYNC_INITIALIZED))
538 return;
540 spin_lock_irqsave(&epca_lock, flags);
542 globalwinon(ch);
543 bc = ch->brdchan;
545 /* ------------------------------------------------------------------
546 In order for an event to be generated on the receipt of data the
547 idata flag must be set. Since we are shutting down, this is not
548 necessary clear this flag.
549 --------------------------------------------------------------------- */
551 if (bc)
552 writeb(0, &bc->idata);
553 tty = ch->tty;
555 /* ----------------------------------------------------------------
556 If we're a modem control device and HUPCL is on, drop RTS & DTR.
557 ------------------------------------------------------------------ */
559 if (tty->termios->c_cflag & HUPCL) {
560 ch->omodem &= ~(ch->m_rts | ch->m_dtr);
561 fepcmd(ch, SETMODEM, 0, ch->m_dtr | ch->m_rts, 10, 1);
563 memoff(ch);
565 /* ------------------------------------------------------------------
566 The channel has officialy been closed. The next time it is opened
567 it will have to reinitialized. Set a flag to indicate this.
568 ---------------------------------------------------------------------- */
570 /* Prevent future Digi programmed interrupts from coming active */
572 ch->asyncflags &= ~ASYNC_INITIALIZED;
573 spin_unlock_irqrestore(&epca_lock, flags);
575 } /* End shutdown */
577 /* ------------------ Begin pc_hangup ------------------------- */
579 static void pc_hangup(struct tty_struct *tty)
580 { /* Begin pc_hangup */
581 struct channel *ch;
583 /* ---------------------------------------------------------
584 verifyChannel returns the channel from the tty struct
585 if it is valid. This serves as a sanity check.
586 ------------------------------------------------------------- */
588 if ((ch = verifyChannel(tty)) != NULL) { /* Begin if ch != NULL */
589 unsigned long flags;
591 if (tty->driver->flush_buffer)
592 tty->driver->flush_buffer(tty);
593 tty_ldisc_flush(tty);
594 shutdown(ch);
596 spin_lock_irqsave(&epca_lock, flags);
597 ch->tty = NULL;
598 ch->event = 0;
599 ch->count = 0;
600 ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED);
601 spin_unlock_irqrestore(&epca_lock, flags);
602 wake_up_interruptible(&ch->open_wait);
603 } /* End if ch != NULL */
605 } /* End pc_hangup */
607 /* ------------------ Begin pc_write ------------------------- */
609 static int pc_write(struct tty_struct * tty,
610 const unsigned char *buf, int bytesAvailable)
611 { /* Begin pc_write */
612 unsigned int head, tail;
613 int dataLen;
614 int size;
615 int amountCopied;
616 struct channel *ch;
617 unsigned long flags;
618 int remain;
619 struct board_chan __iomem *bc;
621 /* ----------------------------------------------------------------
622 pc_write is primarily called directly by the kernel routine
623 tty_write (Though it can also be called by put_char) found in
624 tty_io.c. pc_write is passed a line discipline buffer where
625 the data to be written out is stored. The line discipline
626 implementation itself is done at the kernel level and is not
627 brought into the driver.
628 ------------------------------------------------------------------- */
630 /* ---------------------------------------------------------
631 verifyChannel returns the channel from the tty struct
632 if it is valid. This serves as a sanity check.
633 ------------------------------------------------------------- */
635 if ((ch = verifyChannel(tty)) == NULL)
636 return 0;
638 /* Make a pointer to the channel data structure found on the board. */
640 bc = ch->brdchan;
641 size = ch->txbufsize;
642 amountCopied = 0;
644 spin_lock_irqsave(&epca_lock, flags);
645 globalwinon(ch);
647 head = readw(&bc->tin) & (size - 1);
648 tail = readw(&bc->tout);
650 if (tail != readw(&bc->tout))
651 tail = readw(&bc->tout);
652 tail &= (size - 1);
654 /* If head >= tail, head has not wrapped around. */
655 if (head >= tail) { /* Begin head has not wrapped */
656 /* ---------------------------------------------------------------
657 remain (much like dataLen above) represents the total amount of
658 space available on the card for data. Here dataLen represents
659 the space existing between the head pointer and the end of
660 buffer. This is important because a memcpy cannot be told to
661 automatically wrap around when it hits the buffer end.
662 ------------------------------------------------------------------ */
663 dataLen = size - head;
664 remain = size - (head - tail) - 1;
665 } else { /* Begin head has wrapped around */
667 remain = tail - head - 1;
668 dataLen = remain;
670 } /* End head has wrapped around */
671 /* -------------------------------------------------------------------
672 Check the space on the card. If we have more data than
673 space; reduce the amount of data to fit the space.
674 ---------------------------------------------------------------------- */
675 bytesAvailable = min(remain, bytesAvailable);
676 txwinon(ch);
677 while (bytesAvailable > 0)
678 { /* Begin while there is data to copy onto card */
680 /* -----------------------------------------------------------------
681 If head is not wrapped, the below will make sure the first
682 data copy fills to the end of card buffer.
683 ------------------------------------------------------------------- */
685 dataLen = min(bytesAvailable, dataLen);
686 memcpy_toio(ch->txptr + head, buf, dataLen);
687 buf += dataLen;
688 head += dataLen;
689 amountCopied += dataLen;
690 bytesAvailable -= dataLen;
692 if (head >= size) {
693 head = 0;
694 dataLen = tail;
696 } /* End while there is data to copy onto card */
697 ch->statusflags |= TXBUSY;
698 globalwinon(ch);
699 writew(head, &bc->tin);
701 if ((ch->statusflags & LOWWAIT) == 0) {
702 ch->statusflags |= LOWWAIT;
703 writeb(1, &bc->ilow);
705 memoff(ch);
706 spin_unlock_irqrestore(&epca_lock, flags);
707 return(amountCopied);
709 } /* End pc_write */
711 /* ------------------ Begin pc_put_char ------------------------- */
713 static void pc_put_char(struct tty_struct *tty, unsigned char c)
714 { /* Begin pc_put_char */
715 pc_write(tty, &c, 1);
716 } /* End pc_put_char */
718 /* ------------------ Begin pc_write_room ------------------------- */
720 static int pc_write_room(struct tty_struct *tty)
721 { /* Begin pc_write_room */
723 int remain;
724 struct channel *ch;
725 unsigned long flags;
726 unsigned int head, tail;
727 struct board_chan __iomem *bc;
729 remain = 0;
731 /* ---------------------------------------------------------
732 verifyChannel returns the channel from the tty struct
733 if it is valid. This serves as a sanity check.
734 ------------------------------------------------------------- */
736 if ((ch = verifyChannel(tty)) != NULL) {
737 spin_lock_irqsave(&epca_lock, flags);
738 globalwinon(ch);
740 bc = ch->brdchan;
741 head = readw(&bc->tin) & (ch->txbufsize - 1);
742 tail = readw(&bc->tout);
744 if (tail != readw(&bc->tout))
745 tail = readw(&bc->tout);
746 /* Wrap tail if necessary */
747 tail &= (ch->txbufsize - 1);
749 if ((remain = tail - head - 1) < 0 )
750 remain += ch->txbufsize;
752 if (remain && (ch->statusflags & LOWWAIT) == 0) {
753 ch->statusflags |= LOWWAIT;
754 writeb(1, &bc->ilow);
756 memoff(ch);
757 spin_unlock_irqrestore(&epca_lock, flags);
759 /* Return how much room is left on card */
760 return remain;
762 } /* End pc_write_room */
764 /* ------------------ Begin pc_chars_in_buffer ---------------------- */
766 static int pc_chars_in_buffer(struct tty_struct *tty)
767 { /* Begin pc_chars_in_buffer */
769 int chars;
770 unsigned int ctail, head, tail;
771 int remain;
772 unsigned long flags;
773 struct channel *ch;
774 struct board_chan __iomem *bc;
776 /* ---------------------------------------------------------
777 verifyChannel returns the channel from the tty struct
778 if it is valid. This serves as a sanity check.
779 ------------------------------------------------------------- */
781 if ((ch = verifyChannel(tty)) == NULL)
782 return(0);
784 spin_lock_irqsave(&epca_lock, flags);
785 globalwinon(ch);
787 bc = ch->brdchan;
788 tail = readw(&bc->tout);
789 head = readw(&bc->tin);
790 ctail = readw(&ch->mailbox->cout);
792 if (tail == head && readw(&ch->mailbox->cin) == ctail && readb(&bc->tbusy) == 0)
793 chars = 0;
794 else { /* Begin if some space on the card has been used */
795 head = readw(&bc->tin) & (ch->txbufsize - 1);
796 tail &= (ch->txbufsize - 1);
797 /* --------------------------------------------------------------
798 The logic here is basically opposite of the above pc_write_room
799 here we are finding the amount of bytes in the buffer filled.
800 Not the amount of bytes empty.
801 ------------------------------------------------------------------- */
802 if ((remain = tail - head - 1) < 0 )
803 remain += ch->txbufsize;
804 chars = (int)(ch->txbufsize - remain);
805 /* -------------------------------------------------------------
806 Make it possible to wakeup anything waiting for output
807 in tty_ioctl.c, etc.
809 If not already set. Setup an event to indicate when the
810 transmit buffer empties
811 ----------------------------------------------------------------- */
812 if (!(ch->statusflags & EMPTYWAIT))
813 setup_empty_event(tty,ch);
815 } /* End if some space on the card has been used */
816 memoff(ch);
817 spin_unlock_irqrestore(&epca_lock, flags);
818 /* Return number of characters residing on card. */
819 return(chars);
821 } /* End pc_chars_in_buffer */
823 /* ------------------ Begin pc_flush_buffer ---------------------- */
825 static void pc_flush_buffer(struct tty_struct *tty)
826 { /* Begin pc_flush_buffer */
828 unsigned int tail;
829 unsigned long flags;
830 struct channel *ch;
831 struct board_chan __iomem *bc;
832 /* ---------------------------------------------------------
833 verifyChannel returns the channel from the tty struct
834 if it is valid. This serves as a sanity check.
835 ------------------------------------------------------------- */
836 if ((ch = verifyChannel(tty)) == NULL)
837 return;
839 spin_lock_irqsave(&epca_lock, flags);
840 globalwinon(ch);
841 bc = ch->brdchan;
842 tail = readw(&bc->tout);
843 /* Have FEP move tout pointer; effectively flushing transmit buffer */
844 fepcmd(ch, STOUT, (unsigned) tail, 0, 0, 0);
845 memoff(ch);
846 spin_unlock_irqrestore(&epca_lock, flags);
847 wake_up_interruptible(&tty->write_wait);
848 tty_wakeup(tty);
849 } /* End pc_flush_buffer */
851 /* ------------------ Begin pc_flush_chars ---------------------- */
853 static void pc_flush_chars(struct tty_struct *tty)
854 { /* Begin pc_flush_chars */
855 struct channel * ch;
856 /* ---------------------------------------------------------
857 verifyChannel returns the channel from the tty struct
858 if it is valid. This serves as a sanity check.
859 ------------------------------------------------------------- */
860 if ((ch = verifyChannel(tty)) != NULL) {
861 unsigned long flags;
862 spin_lock_irqsave(&epca_lock, flags);
863 /* ----------------------------------------------------------------
864 If not already set and the transmitter is busy setup an event
865 to indicate when the transmit empties.
866 ------------------------------------------------------------------- */
867 if ((ch->statusflags & TXBUSY) && !(ch->statusflags & EMPTYWAIT))
868 setup_empty_event(tty,ch);
869 spin_unlock_irqrestore(&epca_lock, flags);
871 } /* End pc_flush_chars */
873 /* ------------------ Begin block_til_ready ---------------------- */
875 static int block_til_ready(struct tty_struct *tty,
876 struct file *filp, struct channel *ch)
877 { /* Begin block_til_ready */
878 DECLARE_WAITQUEUE(wait,current);
879 int retval, do_clocal = 0;
880 unsigned long flags;
882 if (tty_hung_up_p(filp)) {
883 if (ch->asyncflags & ASYNC_HUP_NOTIFY)
884 retval = -EAGAIN;
885 else
886 retval = -ERESTARTSYS;
887 return(retval);
890 /* -----------------------------------------------------------------
891 If the device is in the middle of being closed, then block
892 until it's done, and then try again.
893 -------------------------------------------------------------------- */
894 if (ch->asyncflags & ASYNC_CLOSING) {
895 interruptible_sleep_on(&ch->close_wait);
897 if (ch->asyncflags & ASYNC_HUP_NOTIFY)
898 return -EAGAIN;
899 else
900 return -ERESTARTSYS;
903 if (filp->f_flags & O_NONBLOCK) {
904 /* -----------------------------------------------------------------
905 If non-blocking mode is set, then make the check up front
906 and then exit.
907 -------------------------------------------------------------------- */
908 ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
909 return 0;
911 if (tty->termios->c_cflag & CLOCAL)
912 do_clocal = 1;
913 /* Block waiting for the carrier detect and the line to become free */
915 retval = 0;
916 add_wait_queue(&ch->open_wait, &wait);
918 spin_lock_irqsave(&epca_lock, flags);
919 /* We dec count so that pc_close will know when to free things */
920 if (!tty_hung_up_p(filp))
921 ch->count--;
922 ch->blocked_open++;
923 while(1)
924 { /* Begin forever while */
925 set_current_state(TASK_INTERRUPTIBLE);
926 if (tty_hung_up_p(filp) ||
927 !(ch->asyncflags & ASYNC_INITIALIZED))
929 if (ch->asyncflags & ASYNC_HUP_NOTIFY)
930 retval = -EAGAIN;
931 else
932 retval = -ERESTARTSYS;
933 break;
935 if (!(ch->asyncflags & ASYNC_CLOSING) &&
936 (do_clocal || (ch->imodem & ch->dcd)))
937 break;
938 if (signal_pending(current)) {
939 retval = -ERESTARTSYS;
940 break;
942 spin_unlock_irqrestore(&epca_lock, flags);
943 /* ---------------------------------------------------------------
944 Allow someone else to be scheduled. We will occasionally go
945 through this loop until one of the above conditions change.
946 The below schedule call will allow other processes to enter and
947 prevent this loop from hogging the cpu.
948 ------------------------------------------------------------------ */
949 schedule();
950 spin_lock_irqsave(&epca_lock, flags);
952 } /* End forever while */
954 current->state = TASK_RUNNING;
955 remove_wait_queue(&ch->open_wait, &wait);
956 if (!tty_hung_up_p(filp))
957 ch->count++;
958 ch->blocked_open--;
960 spin_unlock_irqrestore(&epca_lock, flags);
962 if (retval)
963 return retval;
965 ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
966 return 0;
967 } /* End block_til_ready */
969 /* ------------------ Begin pc_open ---------------------- */
971 static int pc_open(struct tty_struct *tty, struct file * filp)
972 { /* Begin pc_open */
974 struct channel *ch;
975 unsigned long flags;
976 int line, retval, boardnum;
977 struct board_chan __iomem *bc;
978 unsigned int head;
980 line = tty->index;
981 if (line < 0 || line >= nbdevs)
982 return -ENODEV;
984 ch = &digi_channels[line];
985 boardnum = ch->boardnum;
987 /* Check status of board configured in system. */
989 /* -----------------------------------------------------------------
990 I check to see if the epca_setup routine detected an user error.
991 It might be better to put this in pc_init, but for the moment it
992 goes here.
993 ---------------------------------------------------------------------- */
995 if (invalid_lilo_config) {
996 if (setup_error_code & INVALID_BOARD_TYPE)
997 printk(KERN_ERR "epca: pc_open: Invalid board type specified in kernel options.\n");
998 if (setup_error_code & INVALID_NUM_PORTS)
999 printk(KERN_ERR "epca: pc_open: Invalid number of ports specified in kernel options.\n");
1000 if (setup_error_code & INVALID_MEM_BASE)
1001 printk(KERN_ERR "epca: pc_open: Invalid board memory address specified in kernel options.\n");
1002 if (setup_error_code & INVALID_PORT_BASE)
1003 printk(KERN_ERR "epca; pc_open: Invalid board port address specified in kernel options.\n");
1004 if (setup_error_code & INVALID_BOARD_STATUS)
1005 printk(KERN_ERR "epca: pc_open: Invalid board status specified in kernel options.\n");
1006 if (setup_error_code & INVALID_ALTPIN)
1007 printk(KERN_ERR "epca: pc_open: Invalid board altpin specified in kernel options;\n");
1008 tty->driver_data = NULL; /* Mark this device as 'down' */
1009 return -ENODEV;
1011 if (boardnum >= num_cards || boards[boardnum].status == DISABLED) {
1012 tty->driver_data = NULL; /* Mark this device as 'down' */
1013 return(-ENODEV);
1016 if ((bc = ch->brdchan) == 0) {
1017 tty->driver_data = NULL;
1018 return -ENODEV;
1021 spin_lock_irqsave(&epca_lock, flags);
1022 /* ------------------------------------------------------------------
1023 Every time a channel is opened, increment a counter. This is
1024 necessary because we do not wish to flush and shutdown the channel
1025 until the last app holding the channel open, closes it.
1026 --------------------------------------------------------------------- */
1027 ch->count++;
1028 /* ----------------------------------------------------------------
1029 Set a kernel structures pointer to our local channel
1030 structure. This way we can get to it when passed only
1031 a tty struct.
1032 ------------------------------------------------------------------ */
1033 tty->driver_data = ch;
1034 /* ----------------------------------------------------------------
1035 If this is the first time the channel has been opened, initialize
1036 the tty->termios struct otherwise let pc_close handle it.
1037 -------------------------------------------------------------------- */
1038 globalwinon(ch);
1039 ch->statusflags = 0;
1041 /* Save boards current modem status */
1042 ch->imodem = readb(&bc->mstat);
1044 /* ----------------------------------------------------------------
1045 Set receive head and tail ptrs to each other. This indicates
1046 no data available to read.
1047 ----------------------------------------------------------------- */
1048 head = readw(&bc->rin);
1049 writew(head, &bc->rout);
1051 /* Set the channels associated tty structure */
1052 ch->tty = tty;
1054 /* -----------------------------------------------------------------
1055 The below routine generally sets up parity, baud, flow control
1056 issues, etc.... It effect both control flags and input flags.
1057 -------------------------------------------------------------------- */
1058 epcaparam(tty,ch);
1059 ch->asyncflags |= ASYNC_INITIALIZED;
1060 memoff(ch);
1061 spin_unlock_irqrestore(&epca_lock, flags);
1063 retval = block_til_ready(tty, filp, ch);
1064 if (retval)
1065 return retval;
1066 /* -------------------------------------------------------------
1067 Set this again in case a hangup set it to zero while this
1068 open() was waiting for the line...
1069 --------------------------------------------------------------- */
1070 spin_lock_irqsave(&epca_lock, flags);
1071 ch->tty = tty;
1072 globalwinon(ch);
1073 /* Enable Digi Data events */
1074 writeb(1, &bc->idata);
1075 memoff(ch);
1076 spin_unlock_irqrestore(&epca_lock, flags);
1077 return 0;
1078 } /* End pc_open */
1080 static int __init epca_module_init(void)
1081 { /* Begin init_module */
1082 return pc_init();
1085 module_init(epca_module_init);
1087 static struct pci_driver epca_driver;
1089 static void __exit epca_module_exit(void)
1091 int count, crd;
1092 struct board_info *bd;
1093 struct channel *ch;
1095 del_timer_sync(&epca_timer);
1097 if ((tty_unregister_driver(pc_driver)) ||
1098 (tty_unregister_driver(pc_info)))
1100 printk(KERN_WARNING "epca: cleanup_module failed to un-register tty driver\n");
1101 return;
1103 put_tty_driver(pc_driver);
1104 put_tty_driver(pc_info);
1106 for (crd = 0; crd < num_cards; crd++) { /* Begin for each card */
1107 bd = &boards[crd];
1108 if (!bd)
1109 { /* Begin sanity check */
1110 printk(KERN_ERR "<Error> - Digi : cleanup_module failed\n");
1111 return;
1112 } /* End sanity check */
1113 ch = card_ptr[crd];
1114 for (count = 0; count < bd->numports; count++, ch++)
1115 { /* Begin for each port */
1116 if (ch) {
1117 if (ch->tty)
1118 tty_hangup(ch->tty);
1119 kfree(ch->tmp_buf);
1121 } /* End for each port */
1122 } /* End for each card */
1123 pci_unregister_driver (&epca_driver);
1126 module_exit(epca_module_exit);
1128 static struct tty_operations pc_ops = {
1129 .open = pc_open,
1130 .close = pc_close,
1131 .write = pc_write,
1132 .write_room = pc_write_room,
1133 .flush_buffer = pc_flush_buffer,
1134 .chars_in_buffer = pc_chars_in_buffer,
1135 .flush_chars = pc_flush_chars,
1136 .put_char = pc_put_char,
1137 .ioctl = pc_ioctl,
1138 .set_termios = pc_set_termios,
1139 .stop = pc_stop,
1140 .start = pc_start,
1141 .throttle = pc_throttle,
1142 .unthrottle = pc_unthrottle,
1143 .hangup = pc_hangup,
1146 static int info_open(struct tty_struct *tty, struct file * filp)
1148 return 0;
1151 static struct tty_operations info_ops = {
1152 .open = info_open,
1153 .ioctl = info_ioctl,
1156 /* ------------------ Begin pc_init ---------------------- */
1158 static int __init pc_init(void)
1159 { /* Begin pc_init */
1160 int crd;
1161 struct board_info *bd;
1162 unsigned char board_id = 0;
1164 int pci_boards_found, pci_count;
1166 pci_count = 0;
1168 pc_driver = alloc_tty_driver(MAX_ALLOC);
1169 if (!pc_driver)
1170 return -ENOMEM;
1172 pc_info = alloc_tty_driver(MAX_ALLOC);
1173 if (!pc_info) {
1174 put_tty_driver(pc_driver);
1175 return -ENOMEM;
1178 /* -----------------------------------------------------------------------
1179 If epca_setup has not been ran by LILO set num_cards to defaults; copy
1180 board structure defined by digiConfig into drivers board structure.
1181 Note : If LILO has ran epca_setup then epca_setup will handle defining
1182 num_cards as well as copying the data into the board structure.
1183 -------------------------------------------------------------------------- */
1184 if (!liloconfig) { /* Begin driver has been configured via. epcaconfig */
1186 nbdevs = NBDEVS;
1187 num_cards = NUMCARDS;
1188 memcpy((void *)&boards, (void *)&static_boards,
1189 (sizeof(struct board_info) * NUMCARDS));
1190 } /* End driver has been configured via. epcaconfig */
1192 /* -----------------------------------------------------------------
1193 Note : If lilo was used to configure the driver and the
1194 ignore epcaconfig option was choosen (digiepca=2) then
1195 nbdevs and num_cards will equal 0 at this point. This is
1196 okay; PCI cards will still be picked up if detected.
1197 --------------------------------------------------------------------- */
1199 /* -----------------------------------------------------------
1200 Set up interrupt, we will worry about memory allocation in
1201 post_fep_init.
1202 --------------------------------------------------------------- */
1205 printk(KERN_INFO "DIGI epca driver version %s loaded.\n",VERSION);
1207 /* ------------------------------------------------------------------
1208 NOTE : This code assumes that the number of ports found in
1209 the boards array is correct. This could be wrong if
1210 the card in question is PCI (And therefore has no ports
1211 entry in the boards structure.) The rest of the
1212 information will be valid for PCI because the beginning
1213 of pc_init scans for PCI and determines i/o and base
1214 memory addresses. I am not sure if it is possible to
1215 read the number of ports supported by the card prior to
1216 it being booted (Since that is the state it is in when
1217 pc_init is run). Because it is not possible to query the
1218 number of supported ports until after the card has booted;
1219 we are required to calculate the card_ptrs as the card is
1220 is initialized (Inside post_fep_init). The negative thing
1221 about this approach is that digiDload's call to GET_INFO
1222 will have a bad port value. (Since this is called prior
1223 to post_fep_init.)
1225 --------------------------------------------------------------------- */
1227 pci_boards_found = 0;
1228 if(num_cards < MAXBOARDS)
1229 pci_boards_found += init_PCI();
1230 num_cards += pci_boards_found;
1232 pc_driver->owner = THIS_MODULE;
1233 pc_driver->name = "ttyD";
1234 pc_driver->major = DIGI_MAJOR;
1235 pc_driver->minor_start = 0;
1236 pc_driver->type = TTY_DRIVER_TYPE_SERIAL;
1237 pc_driver->subtype = SERIAL_TYPE_NORMAL;
1238 pc_driver->init_termios = tty_std_termios;
1239 pc_driver->init_termios.c_iflag = 0;
1240 pc_driver->init_termios.c_oflag = 0;
1241 pc_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
1242 pc_driver->init_termios.c_lflag = 0;
1243 pc_driver->flags = TTY_DRIVER_REAL_RAW;
1244 tty_set_operations(pc_driver, &pc_ops);
1246 pc_info->owner = THIS_MODULE;
1247 pc_info->name = "digi_ctl";
1248 pc_info->major = DIGIINFOMAJOR;
1249 pc_info->minor_start = 0;
1250 pc_info->type = TTY_DRIVER_TYPE_SERIAL;
1251 pc_info->subtype = SERIAL_TYPE_INFO;
1252 pc_info->init_termios = tty_std_termios;
1253 pc_info->init_termios.c_iflag = 0;
1254 pc_info->init_termios.c_oflag = 0;
1255 pc_info->init_termios.c_lflag = 0;
1256 pc_info->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL;
1257 pc_info->flags = TTY_DRIVER_REAL_RAW;
1258 tty_set_operations(pc_info, &info_ops);
1261 for (crd = 0; crd < num_cards; crd++)
1262 { /* Begin for each card */
1264 /* ------------------------------------------------------------------
1265 This is where the appropriate memory handlers for the hardware is
1266 set. Everything at runtime blindly jumps through these vectors.
1267 ---------------------------------------------------------------------- */
1269 /* defined in epcaconfig.h */
1270 bd = &boards[crd];
1272 switch (bd->type)
1273 { /* Begin switch on bd->type {board type} */
1274 case PCXEM:
1275 case EISAXEM:
1276 bd->memwinon = pcxem_memwinon ;
1277 bd->memwinoff = pcxem_memwinoff ;
1278 bd->globalwinon = pcxem_globalwinon ;
1279 bd->txwinon = pcxem_txwinon ;
1280 bd->rxwinon = pcxem_rxwinon ;
1281 bd->memoff = pcxem_memoff ;
1282 bd->assertgwinon = dummy_assertgwinon;
1283 bd->assertmemoff = dummy_assertmemoff;
1284 break;
1286 case PCIXEM:
1287 case PCIXRJ:
1288 case PCIXR:
1289 bd->memwinon = dummy_memwinon;
1290 bd->memwinoff = dummy_memwinoff;
1291 bd->globalwinon = dummy_globalwinon;
1292 bd->txwinon = dummy_txwinon;
1293 bd->rxwinon = dummy_rxwinon;
1294 bd->memoff = dummy_memoff;
1295 bd->assertgwinon = dummy_assertgwinon;
1296 bd->assertmemoff = dummy_assertmemoff;
1297 break;
1299 case PCXE:
1300 case PCXEVE:
1302 bd->memwinon = pcxe_memwinon;
1303 bd->memwinoff = pcxe_memwinoff;
1304 bd->globalwinon = pcxe_globalwinon;
1305 bd->txwinon = pcxe_txwinon;
1306 bd->rxwinon = pcxe_rxwinon;
1307 bd->memoff = pcxe_memoff;
1308 bd->assertgwinon = dummy_assertgwinon;
1309 bd->assertmemoff = dummy_assertmemoff;
1310 break;
1312 case PCXI:
1313 case PC64XE:
1315 bd->memwinon = pcxi_memwinon;
1316 bd->memwinoff = pcxi_memwinoff;
1317 bd->globalwinon = pcxi_globalwinon;
1318 bd->txwinon = pcxi_txwinon;
1319 bd->rxwinon = pcxi_rxwinon;
1320 bd->memoff = pcxi_memoff;
1321 bd->assertgwinon = pcxi_assertgwinon;
1322 bd->assertmemoff = pcxi_assertmemoff;
1323 break;
1325 default:
1326 break;
1328 } /* End switch on bd->type */
1330 /* ---------------------------------------------------------------
1331 Some cards need a memory segment to be defined for use in
1332 transmit and receive windowing operations. These boards
1333 are listed in the below switch. In the case of the XI the
1334 amount of memory on the board is variable so the memory_seg
1335 is also variable. This code determines what they segment
1336 should be.
1337 ----------------------------------------------------------------- */
1339 switch (bd->type)
1340 { /* Begin switch on bd->type {board type} */
1342 case PCXE:
1343 case PCXEVE:
1344 case PC64XE:
1345 bd->memory_seg = 0xf000;
1346 break;
1348 case PCXI:
1349 board_id = inb((int)bd->port);
1350 if ((board_id & 0x1) == 0x1)
1351 { /* Begin it's an XI card */
1353 /* Is it a 64K board */
1354 if ((board_id & 0x30) == 0)
1355 bd->memory_seg = 0xf000;
1357 /* Is it a 128K board */
1358 if ((board_id & 0x30) == 0x10)
1359 bd->memory_seg = 0xe000;
1361 /* Is is a 256K board */
1362 if ((board_id & 0x30) == 0x20)
1363 bd->memory_seg = 0xc000;
1365 /* Is it a 512K board */
1366 if ((board_id & 0x30) == 0x30)
1367 bd->memory_seg = 0x8000;
1369 } else printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n",(int)bd->port);
1370 break;
1372 } /* End switch on bd->type */
1374 } /* End for each card */
1376 if (tty_register_driver(pc_driver))
1377 panic("Couldn't register Digi PC/ driver");
1379 if (tty_register_driver(pc_info))
1380 panic("Couldn't register Digi PC/ info ");
1382 /* -------------------------------------------------------------------
1383 Start up the poller to check for events on all enabled boards
1384 ---------------------------------------------------------------------- */
1386 init_timer(&epca_timer);
1387 epca_timer.function = epcapoll;
1388 mod_timer(&epca_timer, jiffies + HZ/25);
1389 return 0;
1391 } /* End pc_init */
1393 /* ------------------ Begin post_fep_init ---------------------- */
1395 static void post_fep_init(unsigned int crd)
1396 { /* Begin post_fep_init */
1398 int i;
1399 void __iomem *memaddr;
1400 struct global_data __iomem *gd;
1401 struct board_info *bd;
1402 struct board_chan __iomem *bc;
1403 struct channel *ch;
1404 int shrinkmem = 0, lowwater ;
1406 /* -------------------------------------------------------------
1407 This call is made by the user via. the ioctl call DIGI_INIT.
1408 It is responsible for setting up all the card specific stuff.
1409 ---------------------------------------------------------------- */
1410 bd = &boards[crd];
1412 /* -----------------------------------------------------------------
1413 If this is a PCI board, get the port info. Remember PCI cards
1414 do not have entries into the epcaconfig.h file, so we can't get
1415 the number of ports from it. Unfortunetly, this means that anyone
1416 doing a DIGI_GETINFO before the board has booted will get an invalid
1417 number of ports returned (It should return 0). Calls to DIGI_GETINFO
1418 after DIGI_INIT has been called will return the proper values.
1419 ------------------------------------------------------------------- */
1421 if (bd->type >= PCIXEM) { /* Begin get PCI number of ports */
1422 /* --------------------------------------------------------------------
1423 Below we use XEMPORTS as a memory offset regardless of which PCI
1424 card it is. This is because all of the supported PCI cards have
1425 the same memory offset for the channel data. This will have to be
1426 changed if we ever develop a PCI/XE card. NOTE : The FEP manual
1427 states that the port offset is 0xC22 as opposed to 0xC02. This is
1428 only true for PC/XE, and PC/XI cards; not for the XEM, or CX series.
1429 On the PCI cards the number of ports is determined by reading a
1430 ID PROM located in the box attached to the card. The card can then
1431 determine the index the id to determine the number of ports available.
1432 (FYI - The id should be located at 0x1ac (And may use up to 4 bytes
1433 if the box in question is a XEM or CX)).
1434 ------------------------------------------------------------------------ */
1435 /* PCI cards are already remapped at this point ISA are not */
1436 bd->numports = readw(bd->re_map_membase + XEMPORTS);
1437 epcaassert(bd->numports <= 64,"PCI returned a invalid number of ports");
1438 nbdevs += (bd->numports);
1439 } else {
1440 /* Fix up the mappings for ISA/EISA etc */
1441 /* FIXME: 64K - can we be smarter ? */
1442 bd->re_map_membase = ioremap(bd->membase, 0x10000);
1445 if (crd != 0)
1446 card_ptr[crd] = card_ptr[crd-1] + boards[crd-1].numports;
1447 else
1448 card_ptr[crd] = &digi_channels[crd]; /* <- For card 0 only */
1450 ch = card_ptr[crd];
1451 epcaassert(ch <= &digi_channels[nbdevs - 1], "ch out of range");
1453 memaddr = bd->re_map_membase;
1455 /* -----------------------------------------------------------------
1456 The below assignment will set bc to point at the BEGINING of
1457 the cards channel structures. For 1 card there will be between
1458 8 and 64 of these structures.
1459 -------------------------------------------------------------------- */
1461 bc = memaddr + CHANSTRUCT;
1463 /* -------------------------------------------------------------------
1464 The below assignment will set gd to point at the BEGINING of
1465 global memory address 0xc00. The first data in that global
1466 memory actually starts at address 0xc1a. The command in
1467 pointer begins at 0xd10.
1468 ---------------------------------------------------------------------- */
1470 gd = memaddr + GLOBAL;
1472 /* --------------------------------------------------------------------
1473 XEPORTS (address 0xc22) points at the number of channels the
1474 card supports. (For 64XE, XI, XEM, and XR use 0xc02)
1475 ----------------------------------------------------------------------- */
1477 if ((bd->type == PCXEVE || bd->type == PCXE) && (readw(memaddr + XEPORTS) < 3))
1478 shrinkmem = 1;
1479 if (bd->type < PCIXEM)
1480 if (!request_region((int)bd->port, 4, board_desc[bd->type]))
1481 return;
1482 memwinon(bd, 0);
1484 /* --------------------------------------------------------------------
1485 Remember ch is the main drivers channels structure, while bc is
1486 the cards channel structure.
1487 ------------------------------------------------------------------------ */
1489 /* For every port on the card do ..... */
1491 for (i = 0; i < bd->numports; i++, ch++, bc++) { /* Begin for each port */
1492 unsigned long flags;
1493 u16 tseg, rseg;
1495 ch->brdchan = bc;
1496 ch->mailbox = gd;
1497 INIT_WORK(&ch->tqueue, do_softint, ch);
1498 ch->board = &boards[crd];
1500 spin_lock_irqsave(&epca_lock, flags);
1501 switch (bd->type) {
1502 /* ----------------------------------------------------------------
1503 Since some of the boards use different bitmaps for their
1504 control signals we cannot hard code these values and retain
1505 portability. We virtualize this data here.
1506 ------------------------------------------------------------------- */
1507 case EISAXEM:
1508 case PCXEM:
1509 case PCIXEM:
1510 case PCIXRJ:
1511 case PCIXR:
1512 ch->m_rts = 0x02 ;
1513 ch->m_dcd = 0x80 ;
1514 ch->m_dsr = 0x20 ;
1515 ch->m_cts = 0x10 ;
1516 ch->m_ri = 0x40 ;
1517 ch->m_dtr = 0x01 ;
1518 break;
1520 case PCXE:
1521 case PCXEVE:
1522 case PCXI:
1523 case PC64XE:
1524 ch->m_rts = 0x02 ;
1525 ch->m_dcd = 0x08 ;
1526 ch->m_dsr = 0x10 ;
1527 ch->m_cts = 0x20 ;
1528 ch->m_ri = 0x40 ;
1529 ch->m_dtr = 0x80 ;
1530 break;
1532 } /* End switch bd->type */
1534 if (boards[crd].altpin) {
1535 ch->dsr = ch->m_dcd;
1536 ch->dcd = ch->m_dsr;
1537 ch->digiext.digi_flags |= DIGI_ALTPIN;
1539 else {
1540 ch->dcd = ch->m_dcd;
1541 ch->dsr = ch->m_dsr;
1544 ch->boardnum = crd;
1545 ch->channelnum = i;
1546 ch->magic = EPCA_MAGIC;
1547 ch->tty = NULL;
1549 if (shrinkmem) {
1550 fepcmd(ch, SETBUFFER, 32, 0, 0, 0);
1551 shrinkmem = 0;
1554 tseg = readw(&bc->tseg);
1555 rseg = readw(&bc->rseg);
1557 switch (bd->type) {
1559 case PCIXEM:
1560 case PCIXRJ:
1561 case PCIXR:
1562 /* Cover all the 2MEG cards */
1563 ch->txptr = memaddr + ((tseg << 4) & 0x1fffff);
1564 ch->rxptr = memaddr + ((rseg << 4) & 0x1fffff);
1565 ch->txwin = FEPWIN | (tseg >> 11);
1566 ch->rxwin = FEPWIN | (rseg >> 11);
1567 break;
1569 case PCXEM:
1570 case EISAXEM:
1571 /* Cover all the 32K windowed cards */
1572 /* Mask equal to window size - 1 */
1573 ch->txptr = memaddr + ((tseg << 4) & 0x7fff);
1574 ch->rxptr = memaddr + ((rseg << 4) & 0x7fff);
1575 ch->txwin = FEPWIN | (tseg >> 11);
1576 ch->rxwin = FEPWIN | (rseg >> 11);
1577 break;
1579 case PCXEVE:
1580 case PCXE:
1581 ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4) & 0x1fff);
1582 ch->txwin = FEPWIN | ((tseg - bd->memory_seg) >> 9);
1583 ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4) & 0x1fff);
1584 ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >>9 );
1585 break;
1587 case PCXI:
1588 case PC64XE:
1589 ch->txptr = memaddr + ((tseg - bd->memory_seg) << 4);
1590 ch->rxptr = memaddr + ((rseg - bd->memory_seg) << 4);
1591 ch->txwin = ch->rxwin = 0;
1592 break;
1594 } /* End switch bd->type */
1596 ch->txbufhead = 0;
1597 ch->txbufsize = readw(&bc->tmax) + 1;
1599 ch->rxbufhead = 0;
1600 ch->rxbufsize = readw(&bc->rmax) + 1;
1602 lowwater = ch->txbufsize >= 2000 ? 1024 : (ch->txbufsize / 2);
1604 /* Set transmitter low water mark */
1605 fepcmd(ch, STXLWATER, lowwater, 0, 10, 0);
1607 /* Set receiver low water mark */
1609 fepcmd(ch, SRXLWATER, (ch->rxbufsize / 4), 0, 10, 0);
1611 /* Set receiver high water mark */
1613 fepcmd(ch, SRXHWATER, (3 * ch->rxbufsize / 4), 0, 10, 0);
1615 writew(100, &bc->edelay);
1616 writeb(1, &bc->idata);
1618 ch->startc = readb(&bc->startc);
1619 ch->stopc = readb(&bc->stopc);
1620 ch->startca = readb(&bc->startca);
1621 ch->stopca = readb(&bc->stopca);
1623 ch->fepcflag = 0;
1624 ch->fepiflag = 0;
1625 ch->fepoflag = 0;
1626 ch->fepstartc = 0;
1627 ch->fepstopc = 0;
1628 ch->fepstartca = 0;
1629 ch->fepstopca = 0;
1631 ch->close_delay = 50;
1632 ch->count = 0;
1633 ch->blocked_open = 0;
1634 init_waitqueue_head(&ch->open_wait);
1635 init_waitqueue_head(&ch->close_wait);
1637 spin_unlock_irqrestore(&epca_lock, flags);
1639 ch->tmp_buf = kmalloc(ch->txbufsize,GFP_KERNEL);
1640 if (!ch->tmp_buf) {
1641 printk(KERN_ERR "POST FEP INIT : kmalloc failed for port 0x%x\n",i);
1642 release_region((int)bd->port, 4);
1643 while(i-- > 0)
1644 kfree((ch--)->tmp_buf);
1645 return;
1646 } else
1647 memset((void *)ch->tmp_buf,0,ch->txbufsize);
1648 } /* End for each port */
1650 printk(KERN_INFO
1651 "Digi PC/Xx Driver V%s: %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n",
1652 VERSION, board_desc[bd->type], (long)bd->port, (long)bd->membase, bd->numports);
1653 memwinoff(bd, 0);
1655 } /* End post_fep_init */
1657 /* --------------------- Begin epcapoll ------------------------ */
1659 static void epcapoll(unsigned long ignored)
1660 { /* Begin epcapoll */
1662 unsigned long flags;
1663 int crd;
1664 volatile unsigned int head, tail;
1665 struct channel *ch;
1666 struct board_info *bd;
1668 /* -------------------------------------------------------------------
1669 This routine is called upon every timer interrupt. Even though
1670 the Digi series cards are capable of generating interrupts this
1671 method of non-looping polling is more efficient. This routine
1672 checks for card generated events (Such as receive data, are transmit
1673 buffer empty) and acts on those events.
1674 ----------------------------------------------------------------------- */
1676 for (crd = 0; crd < num_cards; crd++)
1677 { /* Begin for each card */
1679 bd = &boards[crd];
1680 ch = card_ptr[crd];
1682 if ((bd->status == DISABLED) || digi_poller_inhibited)
1683 continue; /* Begin loop next interation */
1685 /* -----------------------------------------------------------
1686 assertmemoff is not needed here; indeed it is an empty subroutine.
1687 It is being kept because future boards may need this as well as
1688 some legacy boards.
1689 ---------------------------------------------------------------- */
1691 spin_lock_irqsave(&epca_lock, flags);
1693 assertmemoff(ch);
1695 globalwinon(ch);
1697 /* ---------------------------------------------------------------
1698 In this case head and tail actually refer to the event queue not
1699 the transmit or receive queue.
1700 ------------------------------------------------------------------- */
1702 head = readw(&ch->mailbox->ein);
1703 tail = readw(&ch->mailbox->eout);
1705 /* If head isn't equal to tail we have an event */
1707 if (head != tail)
1708 doevent(crd);
1709 memoff(ch);
1711 spin_unlock_irqrestore(&epca_lock, flags);
1713 } /* End for each card */
1714 mod_timer(&epca_timer, jiffies + (HZ / 25));
1715 } /* End epcapoll */
1717 /* --------------------- Begin doevent ------------------------ */
1719 static void doevent(int crd)
1720 { /* Begin doevent */
1722 void __iomem *eventbuf;
1723 struct channel *ch, *chan0;
1724 static struct tty_struct *tty;
1725 struct board_info *bd;
1726 struct board_chan __iomem *bc;
1727 unsigned int tail, head;
1728 int event, channel;
1729 int mstat, lstat;
1731 /* -------------------------------------------------------------------
1732 This subroutine is called by epcapoll when an event is detected
1733 in the event queue. This routine responds to those events.
1734 --------------------------------------------------------------------- */
1735 bd = &boards[crd];
1737 chan0 = card_ptr[crd];
1738 epcaassert(chan0 <= &digi_channels[nbdevs - 1], "ch out of range");
1739 assertgwinon(chan0);
1740 while ((tail = readw(&chan0->mailbox->eout)) != (head = readw(&chan0->mailbox->ein)))
1741 { /* Begin while something in event queue */
1742 assertgwinon(chan0);
1743 eventbuf = bd->re_map_membase + tail + ISTART;
1744 /* Get the channel the event occurred on */
1745 channel = readb(eventbuf);
1746 /* Get the actual event code that occurred */
1747 event = readb(eventbuf + 1);
1748 /* ----------------------------------------------------------------
1749 The two assignments below get the current modem status (mstat)
1750 and the previous modem status (lstat). These are useful becuase
1751 an event could signal a change in modem signals itself.
1752 ------------------------------------------------------------------- */
1753 mstat = readb(eventbuf + 2);
1754 lstat = readb(eventbuf + 3);
1756 ch = chan0 + channel;
1757 if ((unsigned)channel >= bd->numports || !ch) {
1758 if (channel >= bd->numports)
1759 ch = chan0;
1760 bc = ch->brdchan;
1761 goto next;
1764 if ((bc = ch->brdchan) == NULL)
1765 goto next;
1767 if (event & DATA_IND) { /* Begin DATA_IND */
1768 receive_data(ch);
1769 assertgwinon(ch);
1770 } /* End DATA_IND */
1771 /* else *//* Fix for DCD transition missed bug */
1772 if (event & MODEMCHG_IND) { /* Begin MODEMCHG_IND */
1773 /* A modem signal change has been indicated */
1774 ch->imodem = mstat;
1775 if (ch->asyncflags & ASYNC_CHECK_CD) {
1776 if (mstat & ch->dcd) /* We are now receiving dcd */
1777 wake_up_interruptible(&ch->open_wait);
1778 else
1779 pc_sched_event(ch, EPCA_EVENT_HANGUP); /* No dcd; hangup */
1781 } /* End MODEMCHG_IND */
1782 tty = ch->tty;
1783 if (tty) { /* Begin if valid tty */
1784 if (event & BREAK_IND) { /* Begin if BREAK_IND */
1785 /* A break has been indicated */
1786 tty_insert_flip_char(tty, 0, TTY_BREAK);
1787 tty_schedule_flip(tty);
1788 } else if (event & LOWTX_IND) { /* Begin LOWTX_IND */
1789 if (ch->statusflags & LOWWAIT)
1790 { /* Begin if LOWWAIT */
1791 ch->statusflags &= ~LOWWAIT;
1792 tty_wakeup(tty);
1793 wake_up_interruptible(&tty->write_wait);
1794 } /* End if LOWWAIT */
1795 } else if (event & EMPTYTX_IND) { /* Begin EMPTYTX_IND */
1796 /* This event is generated by setup_empty_event */
1797 ch->statusflags &= ~TXBUSY;
1798 if (ch->statusflags & EMPTYWAIT) { /* Begin if EMPTYWAIT */
1799 ch->statusflags &= ~EMPTYWAIT;
1800 tty_wakeup(tty);
1801 wake_up_interruptible(&tty->write_wait);
1802 } /* End if EMPTYWAIT */
1803 } /* End EMPTYTX_IND */
1804 } /* End if valid tty */
1805 next:
1806 globalwinon(ch);
1807 BUG_ON(!bc);
1808 writew(1, &bc->idata);
1809 writew((tail + 4) & (IMAX - ISTART - 4), &chan0->mailbox->eout);
1810 globalwinon(chan0);
1811 } /* End while something in event queue */
1812 } /* End doevent */
1814 /* --------------------- Begin fepcmd ------------------------ */
1816 static void fepcmd(struct channel *ch, int cmd, int word_or_byte,
1817 int byte2, int ncmds, int bytecmd)
1818 { /* Begin fepcmd */
1819 unchar __iomem *memaddr;
1820 unsigned int head, cmdTail, cmdStart, cmdMax;
1821 long count;
1822 int n;
1824 /* This is the routine in which commands may be passed to the card. */
1826 if (ch->board->status == DISABLED)
1827 return;
1828 assertgwinon(ch);
1829 /* Remember head (As well as max) is just an offset not a base addr */
1830 head = readw(&ch->mailbox->cin);
1831 /* cmdStart is a base address */
1832 cmdStart = readw(&ch->mailbox->cstart);
1833 /* ------------------------------------------------------------------
1834 We do the addition below because we do not want a max pointer
1835 relative to cmdStart. We want a max pointer that points at the
1836 physical end of the command queue.
1837 -------------------------------------------------------------------- */
1838 cmdMax = (cmdStart + 4 + readw(&ch->mailbox->cmax));
1839 memaddr = ch->board->re_map_membase;
1841 if (head >= (cmdMax - cmdStart) || (head & 03)) {
1842 printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n", __LINE__, cmd, head);
1843 printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n", __LINE__, cmdMax, cmdStart);
1844 return;
1846 if (bytecmd) {
1847 writeb(cmd, memaddr + head + cmdStart + 0);
1848 writeb(ch->channelnum, memaddr + head + cmdStart + 1);
1849 /* Below word_or_byte is bits to set */
1850 writeb(word_or_byte, memaddr + head + cmdStart + 2);
1851 /* Below byte2 is bits to reset */
1852 writeb(byte2, memaddr + head + cmdStart + 3);
1853 } else {
1854 writeb(cmd, memaddr + head + cmdStart + 0);
1855 writeb(ch->channelnum, memaddr + head + cmdStart + 1);
1856 writeb(word_or_byte, memaddr + head + cmdStart + 2);
1858 head = (head + 4) & (cmdMax - cmdStart - 4);
1859 writew(head, &ch->mailbox->cin);
1860 count = FEPTIMEOUT;
1862 for (;;) { /* Begin forever loop */
1863 count--;
1864 if (count == 0) {
1865 printk(KERN_ERR "<Error> - Fep not responding in fepcmd()\n");
1866 return;
1868 head = readw(&ch->mailbox->cin);
1869 cmdTail = readw(&ch->mailbox->cout);
1870 n = (head - cmdTail) & (cmdMax - cmdStart - 4);
1871 /* ----------------------------------------------------------
1872 Basically this will break when the FEP acknowledges the
1873 command by incrementing cmdTail (Making it equal to head).
1874 ------------------------------------------------------------- */
1875 if (n <= ncmds * (sizeof(short) * 4))
1876 break; /* Well nearly forever :-) */
1877 } /* End forever loop */
1878 } /* End fepcmd */
1880 /* ---------------------------------------------------------------------
1881 Digi products use fields in their channels structures that are very
1882 similar to the c_cflag and c_iflag fields typically found in UNIX
1883 termios structures. The below three routines allow mappings
1884 between these hardware "flags" and their respective Linux flags.
1885 ------------------------------------------------------------------------- */
1887 /* --------------------- Begin termios2digi_h -------------------- */
1889 static unsigned termios2digi_h(struct channel *ch, unsigned cflag)
1890 { /* Begin termios2digi_h */
1891 unsigned res = 0;
1893 if (cflag & CRTSCTS) {
1894 ch->digiext.digi_flags |= (RTSPACE | CTSPACE);
1895 res |= ((ch->m_cts) | (ch->m_rts));
1898 if (ch->digiext.digi_flags & RTSPACE)
1899 res |= ch->m_rts;
1901 if (ch->digiext.digi_flags & DTRPACE)
1902 res |= ch->m_dtr;
1904 if (ch->digiext.digi_flags & CTSPACE)
1905 res |= ch->m_cts;
1907 if (ch->digiext.digi_flags & DSRPACE)
1908 res |= ch->dsr;
1910 if (ch->digiext.digi_flags & DCDPACE)
1911 res |= ch->dcd;
1913 if (res & (ch->m_rts))
1914 ch->digiext.digi_flags |= RTSPACE;
1916 if (res & (ch->m_cts))
1917 ch->digiext.digi_flags |= CTSPACE;
1919 return res;
1921 } /* End termios2digi_h */
1923 /* --------------------- Begin termios2digi_i -------------------- */
1924 static unsigned termios2digi_i(struct channel *ch, unsigned iflag)
1925 { /* Begin termios2digi_i */
1927 unsigned res = iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK |
1928 INPCK | ISTRIP|IXON|IXANY|IXOFF);
1929 if (ch->digiext.digi_flags & DIGI_AIXON)
1930 res |= IAIXON;
1931 return res;
1933 } /* End termios2digi_i */
1935 /* --------------------- Begin termios2digi_c -------------------- */
1937 static unsigned termios2digi_c(struct channel *ch, unsigned cflag)
1938 { /* Begin termios2digi_c */
1940 unsigned res = 0;
1941 if (cflag & CBAUDEX) { /* Begin detected CBAUDEX */
1942 ch->digiext.digi_flags |= DIGI_FAST;
1943 /* -------------------------------------------------------------
1944 HUPCL bit is used by FEP to indicate fast baud
1945 table is to be used.
1946 ----------------------------------------------------------------- */
1947 res |= FEP_HUPCL;
1948 } /* End detected CBAUDEX */
1949 else ch->digiext.digi_flags &= ~DIGI_FAST;
1950 /* -------------------------------------------------------------------
1951 CBAUD has bit position 0x1000 set these days to indicate Linux
1952 baud rate remap. Digi hardware can't handle the bit assignment.
1953 (We use a different bit assignment for high speed.). Clear this
1954 bit out.
1955 ---------------------------------------------------------------------- */
1956 res |= cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE);
1957 /* -------------------------------------------------------------
1958 This gets a little confusing. The Digi cards have their own
1959 representation of c_cflags controling baud rate. For the most
1960 part this is identical to the Linux implementation. However;
1961 Digi supports one rate (76800) that Linux doesn't. This means
1962 that the c_cflag entry that would normally mean 76800 for Digi
1963 actually means 115200 under Linux. Without the below mapping,
1964 a stty 115200 would only drive the board at 76800. Since
1965 the rate 230400 is also found after 76800, the same problem afflicts
1966 us when we choose a rate of 230400. Without the below modificiation
1967 stty 230400 would actually give us 115200.
1969 There are two additional differences. The Linux value for CLOCAL
1970 (0x800; 0004000) has no meaning to the Digi hardware. Also in
1971 later releases of Linux; the CBAUD define has CBAUDEX (0x1000;
1972 0010000) ored into it (CBAUD = 0x100f as opposed to 0xf). CBAUDEX
1973 should be checked for a screened out prior to termios2digi_c
1974 returning. Since CLOCAL isn't used by the board this can be
1975 ignored as long as the returned value is used only by Digi hardware.
1976 ----------------------------------------------------------------- */
1977 if (cflag & CBAUDEX) {
1978 /* -------------------------------------------------------------
1979 The below code is trying to guarantee that only baud rates
1980 115200 and 230400 are remapped. We use exclusive or because
1981 the various baud rates share common bit positions and therefore
1982 can't be tested for easily.
1983 ----------------------------------------------------------------- */
1986 if ((!((cflag & 0x7) ^ (B115200 & ~CBAUDEX))) ||
1987 (!((cflag & 0x7) ^ (B230400 & ~CBAUDEX))))
1988 res += 1;
1990 return res;
1992 } /* End termios2digi_c */
1994 /* --------------------- Begin epcaparam ----------------------- */
1996 /* Caller must hold the locks */
1997 static void epcaparam(struct tty_struct *tty, struct channel *ch)
1998 { /* Begin epcaparam */
2000 unsigned int cmdHead;
2001 struct termios *ts;
2002 struct board_chan __iomem *bc;
2003 unsigned mval, hflow, cflag, iflag;
2005 bc = ch->brdchan;
2006 epcaassert(bc !=0, "bc out of range");
2008 assertgwinon(ch);
2009 ts = tty->termios;
2010 if ((ts->c_cflag & CBAUD) == 0) { /* Begin CBAUD detected */
2011 cmdHead = readw(&bc->rin);
2012 writew(cmdHead, &bc->rout);
2013 cmdHead = readw(&bc->tin);
2014 /* Changing baud in mid-stream transmission can be wonderful */
2015 /* ---------------------------------------------------------------
2016 Flush current transmit buffer by setting cmdTail pointer (tout)
2017 to cmdHead pointer (tin). Hopefully the transmit buffer is empty.
2018 ----------------------------------------------------------------- */
2019 fepcmd(ch, STOUT, (unsigned) cmdHead, 0, 0, 0);
2020 mval = 0;
2021 } else { /* Begin CBAUD not detected */
2022 /* -------------------------------------------------------------------
2023 c_cflags have changed but that change had nothing to do with BAUD.
2024 Propagate the change to the card.
2025 ---------------------------------------------------------------------- */
2026 cflag = termios2digi_c(ch, ts->c_cflag);
2027 if (cflag != ch->fepcflag) {
2028 ch->fepcflag = cflag;
2029 /* Set baud rate, char size, stop bits, parity */
2030 fepcmd(ch, SETCTRLFLAGS, (unsigned) cflag, 0, 0, 0);
2032 /* ----------------------------------------------------------------
2033 If the user has not forced CLOCAL and if the device is not a
2034 CALLOUT device (Which is always CLOCAL) we set flags such that
2035 the driver will wait on carrier detect.
2036 ------------------------------------------------------------------- */
2037 if (ts->c_cflag & CLOCAL)
2038 ch->asyncflags &= ~ASYNC_CHECK_CD;
2039 else
2040 ch->asyncflags |= ASYNC_CHECK_CD;
2041 mval = ch->m_dtr | ch->m_rts;
2042 } /* End CBAUD not detected */
2043 iflag = termios2digi_i(ch, ts->c_iflag);
2044 /* Check input mode flags */
2045 if (iflag != ch->fepiflag) {
2046 ch->fepiflag = iflag;
2047 /* ---------------------------------------------------------------
2048 Command sets channels iflag structure on the board. Such things
2049 as input soft flow control, handling of parity errors, and
2050 break handling are all set here.
2051 ------------------------------------------------------------------- */
2052 /* break handling, parity handling, input stripping, flow control chars */
2053 fepcmd(ch, SETIFLAGS, (unsigned int) ch->fepiflag, 0, 0, 0);
2055 /* ---------------------------------------------------------------
2056 Set the board mint value for this channel. This will cause hardware
2057 events to be generated each time the DCD signal (Described in mint)
2058 changes.
2059 ------------------------------------------------------------------- */
2060 writeb(ch->dcd, &bc->mint);
2061 if ((ts->c_cflag & CLOCAL) || (ch->digiext.digi_flags & DIGI_FORCEDCD))
2062 if (ch->digiext.digi_flags & DIGI_FORCEDCD)
2063 writeb(0, &bc->mint);
2064 ch->imodem = readb(&bc->mstat);
2065 hflow = termios2digi_h(ch, ts->c_cflag);
2066 if (hflow != ch->hflow) {
2067 ch->hflow = hflow;
2068 /* --------------------------------------------------------------
2069 Hard flow control has been selected but the board is not
2070 using it. Activate hard flow control now.
2071 ----------------------------------------------------------------- */
2072 fepcmd(ch, SETHFLOW, hflow, 0xff, 0, 1);
2074 mval ^= ch->modemfake & (mval ^ ch->modem);
2076 if (ch->omodem ^ mval) {
2077 ch->omodem = mval;
2078 /* --------------------------------------------------------------
2079 The below command sets the DTR and RTS mstat structure. If
2080 hard flow control is NOT active these changes will drive the
2081 output of the actual DTR and RTS lines. If hard flow control
2082 is active, the changes will be saved in the mstat structure and
2083 only asserted when hard flow control is turned off.
2084 ----------------------------------------------------------------- */
2086 /* First reset DTR & RTS; then set them */
2087 fepcmd(ch, SETMODEM, 0, ((ch->m_dtr)|(ch->m_rts)), 0, 1);
2088 fepcmd(ch, SETMODEM, mval, 0, 0, 1);
2090 if (ch->startc != ch->fepstartc || ch->stopc != ch->fepstopc) {
2091 ch->fepstartc = ch->startc;
2092 ch->fepstopc = ch->stopc;
2093 /* ------------------------------------------------------------
2094 The XON / XOFF characters have changed; propagate these
2095 changes to the card.
2096 --------------------------------------------------------------- */
2097 fepcmd(ch, SONOFFC, ch->fepstartc, ch->fepstopc, 0, 1);
2099 if (ch->startca != ch->fepstartca || ch->stopca != ch->fepstopca) {
2100 ch->fepstartca = ch->startca;
2101 ch->fepstopca = ch->stopca;
2102 /* ---------------------------------------------------------------
2103 Similar to the above, this time the auxilarly XON / XOFF
2104 characters have changed; propagate these changes to the card.
2105 ------------------------------------------------------------------ */
2106 fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1);
2108 } /* End epcaparam */
2110 /* --------------------- Begin receive_data ----------------------- */
2111 /* Caller holds lock */
2112 static void receive_data(struct channel *ch)
2113 { /* Begin receive_data */
2115 unchar *rptr;
2116 struct termios *ts = NULL;
2117 struct tty_struct *tty;
2118 struct board_chan __iomem *bc;
2119 int dataToRead, wrapgap, bytesAvailable;
2120 unsigned int tail, head;
2121 unsigned int wrapmask;
2123 /* ---------------------------------------------------------------
2124 This routine is called by doint when a receive data event
2125 has taken place.
2126 ------------------------------------------------------------------- */
2128 globalwinon(ch);
2129 if (ch->statusflags & RXSTOPPED)
2130 return;
2131 tty = ch->tty;
2132 if (tty)
2133 ts = tty->termios;
2134 bc = ch->brdchan;
2135 BUG_ON(!bc);
2136 wrapmask = ch->rxbufsize - 1;
2138 /* ---------------------------------------------------------------------
2139 Get the head and tail pointers to the receiver queue. Wrap the
2140 head pointer if it has reached the end of the buffer.
2141 ------------------------------------------------------------------------ */
2142 head = readw(&bc->rin);
2143 head &= wrapmask;
2144 tail = readw(&bc->rout) & wrapmask;
2146 bytesAvailable = (head - tail) & wrapmask;
2147 if (bytesAvailable == 0)
2148 return;
2150 /* ------------------------------------------------------------------
2151 If CREAD bit is off or device not open, set TX tail to head
2152 --------------------------------------------------------------------- */
2154 if (!tty || !ts || !(ts->c_cflag & CREAD)) {
2155 writew(head, &bc->rout);
2156 return;
2159 if (tty_buffer_request_room(tty, bytesAvailable + 1) == 0)
2160 return;
2162 if (readb(&bc->orun)) {
2163 writeb(0, &bc->orun);
2164 printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n",tty->name);
2165 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
2167 rxwinon(ch);
2168 while (bytesAvailable > 0) { /* Begin while there is data on the card */
2169 wrapgap = (head >= tail) ? head - tail : ch->rxbufsize - tail;
2170 /* ---------------------------------------------------------------
2171 Even if head has wrapped around only report the amount of
2172 data to be equal to the size - tail. Remember memcpy can't
2173 automaticly wrap around the receive buffer.
2174 ----------------------------------------------------------------- */
2175 dataToRead = (wrapgap < bytesAvailable) ? wrapgap : bytesAvailable;
2176 /* --------------------------------------------------------------
2177 Make sure we don't overflow the buffer
2178 ----------------------------------------------------------------- */
2179 dataToRead = tty_prepare_flip_string(tty, &rptr, dataToRead);
2180 if (dataToRead == 0)
2181 break;
2182 /* ---------------------------------------------------------------
2183 Move data read from our card into the line disciplines buffer
2184 for translation if necessary.
2185 ------------------------------------------------------------------ */
2186 memcpy_fromio(rptr, ch->rxptr + tail, dataToRead);
2187 tail = (tail + dataToRead) & wrapmask;
2188 bytesAvailable -= dataToRead;
2189 } /* End while there is data on the card */
2190 globalwinon(ch);
2191 writew(tail, &bc->rout);
2192 /* Must be called with global data */
2193 tty_schedule_flip(ch->tty);
2194 return;
2195 } /* End receive_data */
2197 static int info_ioctl(struct tty_struct *tty, struct file * file,
2198 unsigned int cmd, unsigned long arg)
2200 switch (cmd)
2201 { /* Begin switch cmd */
2202 case DIGI_GETINFO:
2203 { /* Begin case DIGI_GETINFO */
2204 struct digi_info di ;
2205 int brd;
2207 if(get_user(brd, (unsigned int __user *)arg))
2208 return -EFAULT;
2209 if (brd < 0 || brd >= num_cards || num_cards == 0)
2210 return -ENODEV;
2212 memset(&di, 0, sizeof(di));
2214 di.board = brd ;
2215 di.status = boards[brd].status;
2216 di.type = boards[brd].type ;
2217 di.numports = boards[brd].numports ;
2218 /* Legacy fixups - just move along nothing to see */
2219 di.port = (unsigned char *)boards[brd].port ;
2220 di.membase = (unsigned char *)boards[brd].membase ;
2222 if (copy_to_user((void __user *)arg, &di, sizeof (di)))
2223 return -EFAULT;
2224 break;
2226 } /* End case DIGI_GETINFO */
2228 case DIGI_POLLER:
2229 { /* Begin case DIGI_POLLER */
2231 int brd = arg & 0xff000000 >> 16 ;
2232 unsigned char state = arg & 0xff ;
2234 if (brd < 0 || brd >= num_cards) {
2235 printk(KERN_ERR "epca: DIGI POLLER : brd not valid!\n");
2236 return (-ENODEV);
2238 digi_poller_inhibited = state ;
2239 break ;
2240 } /* End case DIGI_POLLER */
2242 case DIGI_INIT:
2243 { /* Begin case DIGI_INIT */
2244 /* ------------------------------------------------------------
2245 This call is made by the apps to complete the initilization
2246 of the board(s). This routine is responsible for setting
2247 the card to its initial state and setting the drivers control
2248 fields to the sutianle settings for the card in question.
2249 ---------------------------------------------------------------- */
2250 int crd ;
2251 for (crd = 0; crd < num_cards; crd++)
2252 post_fep_init (crd);
2253 break ;
2254 } /* End case DIGI_INIT */
2255 default:
2256 return -ENOTTY;
2257 } /* End switch cmd */
2258 return (0) ;
2260 /* --------------------- Begin pc_ioctl ----------------------- */
2262 static int pc_tiocmget(struct tty_struct *tty, struct file *file)
2264 struct channel *ch = (struct channel *) tty->driver_data;
2265 struct board_chan __iomem *bc;
2266 unsigned int mstat, mflag = 0;
2267 unsigned long flags;
2269 if (ch)
2270 bc = ch->brdchan;
2271 else
2272 return -EINVAL;
2274 spin_lock_irqsave(&epca_lock, flags);
2275 globalwinon(ch);
2276 mstat = readb(&bc->mstat);
2277 memoff(ch);
2278 spin_unlock_irqrestore(&epca_lock, flags);
2280 if (mstat & ch->m_dtr)
2281 mflag |= TIOCM_DTR;
2282 if (mstat & ch->m_rts)
2283 mflag |= TIOCM_RTS;
2284 if (mstat & ch->m_cts)
2285 mflag |= TIOCM_CTS;
2286 if (mstat & ch->dsr)
2287 mflag |= TIOCM_DSR;
2288 if (mstat & ch->m_ri)
2289 mflag |= TIOCM_RI;
2290 if (mstat & ch->dcd)
2291 mflag |= TIOCM_CD;
2292 return mflag;
2295 static int pc_tiocmset(struct tty_struct *tty, struct file *file,
2296 unsigned int set, unsigned int clear)
2298 struct channel *ch = (struct channel *) tty->driver_data;
2299 unsigned long flags;
2301 if (!ch)
2302 return -EINVAL;
2304 spin_lock_irqsave(&epca_lock, flags);
2306 * I think this modemfake stuff is broken. It doesn't
2307 * correctly reflect the behaviour desired by the TIOCM*
2308 * ioctls. Therefore this is probably broken.
2310 if (set & TIOCM_RTS) {
2311 ch->modemfake |= ch->m_rts;
2312 ch->modem |= ch->m_rts;
2314 if (set & TIOCM_DTR) {
2315 ch->modemfake |= ch->m_dtr;
2316 ch->modem |= ch->m_dtr;
2318 if (clear & TIOCM_RTS) {
2319 ch->modemfake |= ch->m_rts;
2320 ch->modem &= ~ch->m_rts;
2322 if (clear & TIOCM_DTR) {
2323 ch->modemfake |= ch->m_dtr;
2324 ch->modem &= ~ch->m_dtr;
2326 globalwinon(ch);
2327 /* --------------------------------------------------------------
2328 The below routine generally sets up parity, baud, flow control
2329 issues, etc.... It effect both control flags and input flags.
2330 ------------------------------------------------------------------ */
2331 epcaparam(tty,ch);
2332 memoff(ch);
2333 spin_unlock_irqrestore(&epca_lock, flags);
2334 return 0;
2337 static int pc_ioctl(struct tty_struct *tty, struct file * file,
2338 unsigned int cmd, unsigned long arg)
2339 { /* Begin pc_ioctl */
2341 digiflow_t dflow;
2342 int retval;
2343 unsigned long flags;
2344 unsigned int mflag, mstat;
2345 unsigned char startc, stopc;
2346 struct board_chan __iomem *bc;
2347 struct channel *ch = (struct channel *) tty->driver_data;
2348 void __user *argp = (void __user *)arg;
2350 if (ch)
2351 bc = ch->brdchan;
2352 else
2353 return -EINVAL;
2355 /* -------------------------------------------------------------------
2356 For POSIX compliance we need to add more ioctls. See tty_ioctl.c
2357 in /usr/src/linux/drivers/char for a good example. In particular
2358 think about adding TCSETAF, TCSETAW, TCSETA, TCSETSF, TCSETSW, TCSETS.
2359 ---------------------------------------------------------------------- */
2361 switch (cmd)
2362 { /* Begin switch cmd */
2364 case TCGETS:
2365 if (copy_to_user(argp, tty->termios, sizeof(struct termios)))
2366 return -EFAULT;
2367 return 0;
2368 case TCGETA:
2369 return get_termio(tty, argp);
2370 case TCSBRK: /* SVID version: non-zero arg --> no break */
2371 retval = tty_check_change(tty);
2372 if (retval)
2373 return retval;
2374 /* Setup an event to indicate when the transmit buffer empties */
2375 spin_lock_irqsave(&epca_lock, flags);
2376 setup_empty_event(tty,ch);
2377 spin_unlock_irqrestore(&epca_lock, flags);
2378 tty_wait_until_sent(tty, 0);
2379 if (!arg)
2380 digi_send_break(ch, HZ/4); /* 1/4 second */
2381 return 0;
2382 case TCSBRKP: /* support for POSIX tcsendbreak() */
2383 retval = tty_check_change(tty);
2384 if (retval)
2385 return retval;
2387 /* Setup an event to indicate when the transmit buffer empties */
2388 spin_lock_irqsave(&epca_lock, flags);
2389 setup_empty_event(tty,ch);
2390 spin_unlock_irqrestore(&epca_lock, flags);
2391 tty_wait_until_sent(tty, 0);
2392 digi_send_break(ch, arg ? arg*(HZ/10) : HZ/4);
2393 return 0;
2394 case TIOCGSOFTCAR:
2395 if (put_user(C_CLOCAL(tty)?1:0, (unsigned long __user *)arg))
2396 return -EFAULT;
2397 return 0;
2398 case TIOCSSOFTCAR:
2400 unsigned int value;
2402 if (get_user(value, (unsigned __user *)argp))
2403 return -EFAULT;
2404 tty->termios->c_cflag =
2405 ((tty->termios->c_cflag & ~CLOCAL) |
2406 (value ? CLOCAL : 0));
2407 return 0;
2409 case TIOCMODG:
2410 mflag = pc_tiocmget(tty, file);
2411 if (put_user(mflag, (unsigned long __user *)argp))
2412 return -EFAULT;
2413 break;
2414 case TIOCMODS:
2415 if (get_user(mstat, (unsigned __user *)argp))
2416 return -EFAULT;
2417 return pc_tiocmset(tty, file, mstat, ~mstat);
2418 case TIOCSDTR:
2419 spin_lock_irqsave(&epca_lock, flags);
2420 ch->omodem |= ch->m_dtr;
2421 globalwinon(ch);
2422 fepcmd(ch, SETMODEM, ch->m_dtr, 0, 10, 1);
2423 memoff(ch);
2424 spin_unlock_irqrestore(&epca_lock, flags);
2425 break;
2427 case TIOCCDTR:
2428 spin_lock_irqsave(&epca_lock, flags);
2429 ch->omodem &= ~ch->m_dtr;
2430 globalwinon(ch);
2431 fepcmd(ch, SETMODEM, 0, ch->m_dtr, 10, 1);
2432 memoff(ch);
2433 spin_unlock_irqrestore(&epca_lock, flags);
2434 break;
2435 case DIGI_GETA:
2436 if (copy_to_user(argp, &ch->digiext, sizeof(digi_t)))
2437 return -EFAULT;
2438 break;
2439 case DIGI_SETAW:
2440 case DIGI_SETAF:
2441 if (cmd == DIGI_SETAW) {
2442 /* Setup an event to indicate when the transmit buffer empties */
2443 spin_lock_irqsave(&epca_lock, flags);
2444 setup_empty_event(tty,ch);
2445 spin_unlock_irqrestore(&epca_lock, flags);
2446 tty_wait_until_sent(tty, 0);
2447 } else {
2448 /* ldisc lock already held in ioctl */
2449 if (tty->ldisc.flush_buffer)
2450 tty->ldisc.flush_buffer(tty);
2452 /* Fall Thru */
2453 case DIGI_SETA:
2454 if (copy_from_user(&ch->digiext, argp, sizeof(digi_t)))
2455 return -EFAULT;
2457 if (ch->digiext.digi_flags & DIGI_ALTPIN) {
2458 ch->dcd = ch->m_dsr;
2459 ch->dsr = ch->m_dcd;
2460 } else {
2461 ch->dcd = ch->m_dcd;
2462 ch->dsr = ch->m_dsr;
2465 spin_lock_irqsave(&epca_lock, flags);
2466 globalwinon(ch);
2468 /* -----------------------------------------------------------------
2469 The below routine generally sets up parity, baud, flow control
2470 issues, etc.... It effect both control flags and input flags.
2471 ------------------------------------------------------------------- */
2473 epcaparam(tty,ch);
2474 memoff(ch);
2475 spin_unlock_irqrestore(&epca_lock, flags);
2476 break;
2478 case DIGI_GETFLOW:
2479 case DIGI_GETAFLOW:
2480 spin_lock_irqsave(&epca_lock, flags);
2481 globalwinon(ch);
2482 if (cmd == DIGI_GETFLOW) {
2483 dflow.startc = readb(&bc->startc);
2484 dflow.stopc = readb(&bc->stopc);
2485 } else {
2486 dflow.startc = readb(&bc->startca);
2487 dflow.stopc = readb(&bc->stopca);
2489 memoff(ch);
2490 spin_unlock_irqrestore(&epca_lock, flags);
2492 if (copy_to_user(argp, &dflow, sizeof(dflow)))
2493 return -EFAULT;
2494 break;
2496 case DIGI_SETAFLOW:
2497 case DIGI_SETFLOW:
2498 if (cmd == DIGI_SETFLOW) {
2499 startc = ch->startc;
2500 stopc = ch->stopc;
2501 } else {
2502 startc = ch->startca;
2503 stopc = ch->stopca;
2506 if (copy_from_user(&dflow, argp, sizeof(dflow)))
2507 return -EFAULT;
2509 if (dflow.startc != startc || dflow.stopc != stopc) { /* Begin if setflow toggled */
2510 spin_lock_irqsave(&epca_lock, flags);
2511 globalwinon(ch);
2513 if (cmd == DIGI_SETFLOW) {
2514 ch->fepstartc = ch->startc = dflow.startc;
2515 ch->fepstopc = ch->stopc = dflow.stopc;
2516 fepcmd(ch, SONOFFC, ch->fepstartc, ch->fepstopc, 0, 1);
2517 } else {
2518 ch->fepstartca = ch->startca = dflow.startc;
2519 ch->fepstopca = ch->stopca = dflow.stopc;
2520 fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1);
2523 if (ch->statusflags & TXSTOPPED)
2524 pc_start(tty);
2526 memoff(ch);
2527 spin_unlock_irqrestore(&epca_lock, flags);
2528 } /* End if setflow toggled */
2529 break;
2530 default:
2531 return -ENOIOCTLCMD;
2532 } /* End switch cmd */
2533 return 0;
2534 } /* End pc_ioctl */
2536 /* --------------------- Begin pc_set_termios ----------------------- */
2538 static void pc_set_termios(struct tty_struct *tty, struct termios *old_termios)
2539 { /* Begin pc_set_termios */
2541 struct channel *ch;
2542 unsigned long flags;
2543 /* ---------------------------------------------------------
2544 verifyChannel returns the channel from the tty struct
2545 if it is valid. This serves as a sanity check.
2546 ------------------------------------------------------------- */
2547 if ((ch = verifyChannel(tty)) != NULL) { /* Begin if channel valid */
2548 spin_lock_irqsave(&epca_lock, flags);
2549 globalwinon(ch);
2550 epcaparam(tty, ch);
2551 memoff(ch);
2552 spin_unlock_irqrestore(&epca_lock, flags);
2554 if ((old_termios->c_cflag & CRTSCTS) &&
2555 ((tty->termios->c_cflag & CRTSCTS) == 0))
2556 tty->hw_stopped = 0;
2558 if (!(old_termios->c_cflag & CLOCAL) &&
2559 (tty->termios->c_cflag & CLOCAL))
2560 wake_up_interruptible(&ch->open_wait);
2562 } /* End if channel valid */
2564 } /* End pc_set_termios */
2566 /* --------------------- Begin do_softint ----------------------- */
2568 static void do_softint(void *private_)
2569 { /* Begin do_softint */
2570 struct channel *ch = (struct channel *) private_;
2571 /* Called in response to a modem change event */
2572 if (ch && ch->magic == EPCA_MAGIC) { /* Begin EPCA_MAGIC */
2573 struct tty_struct *tty = ch->tty;
2575 if (tty && tty->driver_data) {
2576 if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) { /* Begin if clear_bit */
2577 tty_hangup(tty); /* FIXME: module removal race here - AKPM */
2578 wake_up_interruptible(&ch->open_wait);
2579 ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
2580 } /* End if clear_bit */
2582 } /* End EPCA_MAGIC */
2583 } /* End do_softint */
2585 /* ------------------------------------------------------------
2586 pc_stop and pc_start provide software flow control to the
2587 routine and the pc_ioctl routine.
2588 ---------------------------------------------------------------- */
2590 /* --------------------- Begin pc_stop ----------------------- */
2592 static void pc_stop(struct tty_struct *tty)
2593 { /* Begin pc_stop */
2595 struct channel *ch;
2596 unsigned long flags;
2597 /* ---------------------------------------------------------
2598 verifyChannel returns the channel from the tty struct
2599 if it is valid. This serves as a sanity check.
2600 ------------------------------------------------------------- */
2601 if ((ch = verifyChannel(tty)) != NULL) { /* Begin if valid channel */
2602 spin_lock_irqsave(&epca_lock, flags);
2603 if ((ch->statusflags & TXSTOPPED) == 0) { /* Begin if transmit stop requested */
2604 globalwinon(ch);
2605 /* STOP transmitting now !! */
2606 fepcmd(ch, PAUSETX, 0, 0, 0, 0);
2607 ch->statusflags |= TXSTOPPED;
2608 memoff(ch);
2609 } /* End if transmit stop requested */
2610 spin_unlock_irqrestore(&epca_lock, flags);
2611 } /* End if valid channel */
2612 } /* End pc_stop */
2614 /* --------------------- Begin pc_start ----------------------- */
2616 static void pc_start(struct tty_struct *tty)
2617 { /* Begin pc_start */
2618 struct channel *ch;
2619 /* ---------------------------------------------------------
2620 verifyChannel returns the channel from the tty struct
2621 if it is valid. This serves as a sanity check.
2622 ------------------------------------------------------------- */
2623 if ((ch = verifyChannel(tty)) != NULL) { /* Begin if channel valid */
2624 unsigned long flags;
2625 spin_lock_irqsave(&epca_lock, flags);
2626 /* Just in case output was resumed because of a change in Digi-flow */
2627 if (ch->statusflags & TXSTOPPED) { /* Begin transmit resume requested */
2628 struct board_chan __iomem *bc;
2629 globalwinon(ch);
2630 bc = ch->brdchan;
2631 if (ch->statusflags & LOWWAIT)
2632 writeb(1, &bc->ilow);
2633 /* Okay, you can start transmitting again... */
2634 fepcmd(ch, RESUMETX, 0, 0, 0, 0);
2635 ch->statusflags &= ~TXSTOPPED;
2636 memoff(ch);
2637 } /* End transmit resume requested */
2638 spin_unlock_irqrestore(&epca_lock, flags);
2639 } /* End if channel valid */
2640 } /* End pc_start */
2642 /* ------------------------------------------------------------------
2643 The below routines pc_throttle and pc_unthrottle are used
2644 to slow (And resume) the receipt of data into the kernels
2645 receive buffers. The exact occurrence of this depends on the
2646 size of the kernels receive buffer and what the 'watermarks'
2647 are set to for that buffer. See the n_ttys.c file for more
2648 details.
2649 ______________________________________________________________________ */
2650 /* --------------------- Begin throttle ----------------------- */
2652 static void pc_throttle(struct tty_struct * tty)
2653 { /* Begin pc_throttle */
2654 struct channel *ch;
2655 unsigned long flags;
2656 /* ---------------------------------------------------------
2657 verifyChannel returns the channel from the tty struct
2658 if it is valid. This serves as a sanity check.
2659 ------------------------------------------------------------- */
2660 if ((ch = verifyChannel(tty)) != NULL) { /* Begin if channel valid */
2661 spin_lock_irqsave(&epca_lock, flags);
2662 if ((ch->statusflags & RXSTOPPED) == 0) {
2663 globalwinon(ch);
2664 fepcmd(ch, PAUSERX, 0, 0, 0, 0);
2665 ch->statusflags |= RXSTOPPED;
2666 memoff(ch);
2668 spin_unlock_irqrestore(&epca_lock, flags);
2669 } /* End if channel valid */
2670 } /* End pc_throttle */
2672 /* --------------------- Begin unthrottle ----------------------- */
2674 static void pc_unthrottle(struct tty_struct *tty)
2675 { /* Begin pc_unthrottle */
2676 struct channel *ch;
2677 unsigned long flags;
2678 /* ---------------------------------------------------------
2679 verifyChannel returns the channel from the tty struct
2680 if it is valid. This serves as a sanity check.
2681 ------------------------------------------------------------- */
2682 if ((ch = verifyChannel(tty)) != NULL) { /* Begin if channel valid */
2683 /* Just in case output was resumed because of a change in Digi-flow */
2684 spin_lock_irqsave(&epca_lock, flags);
2685 if (ch->statusflags & RXSTOPPED) {
2686 globalwinon(ch);
2687 fepcmd(ch, RESUMERX, 0, 0, 0, 0);
2688 ch->statusflags &= ~RXSTOPPED;
2689 memoff(ch);
2691 spin_unlock_irqrestore(&epca_lock, flags);
2692 } /* End if channel valid */
2693 } /* End pc_unthrottle */
2695 /* --------------------- Begin digi_send_break ----------------------- */
2697 void digi_send_break(struct channel *ch, int msec)
2698 { /* Begin digi_send_break */
2699 unsigned long flags;
2701 spin_lock_irqsave(&epca_lock, flags);
2702 globalwinon(ch);
2703 /* --------------------------------------------------------------------
2704 Maybe I should send an infinite break here, schedule() for
2705 msec amount of time, and then stop the break. This way,
2706 the user can't screw up the FEP by causing digi_send_break()
2707 to be called (i.e. via an ioctl()) more than once in msec amount
2708 of time. Try this for now...
2709 ------------------------------------------------------------------------ */
2710 fepcmd(ch, SENDBREAK, msec, 0, 10, 0);
2711 memoff(ch);
2712 spin_unlock_irqrestore(&epca_lock, flags);
2713 } /* End digi_send_break */
2715 /* --------------------- Begin setup_empty_event ----------------------- */
2717 /* Caller MUST hold the lock */
2719 static void setup_empty_event(struct tty_struct *tty, struct channel *ch)
2720 { /* Begin setup_empty_event */
2722 struct board_chan __iomem *bc = ch->brdchan;
2724 globalwinon(ch);
2725 ch->statusflags |= EMPTYWAIT;
2726 /* ------------------------------------------------------------------
2727 When set the iempty flag request a event to be generated when the
2728 transmit buffer is empty (If there is no BREAK in progress).
2729 --------------------------------------------------------------------- */
2730 writeb(1, &bc->iempty);
2731 memoff(ch);
2732 } /* End setup_empty_event */
2734 /* --------------------- Begin get_termio ----------------------- */
2736 static int get_termio(struct tty_struct * tty, struct termio __user * termio)
2737 { /* Begin get_termio */
2738 return kernel_termios_to_user_termio(termio, tty->termios);
2739 } /* End get_termio */
2741 /* ---------------------- Begin epca_setup -------------------------- */
2742 void epca_setup(char *str, int *ints)
2743 { /* Begin epca_setup */
2744 struct board_info board;
2745 int index, loop, last;
2746 char *temp, *t2;
2747 unsigned len;
2749 /* ----------------------------------------------------------------------
2750 If this routine looks a little strange it is because it is only called
2751 if a LILO append command is given to boot the kernel with parameters.
2752 In this way, we can provide the user a method of changing his board
2753 configuration without rebuilding the kernel.
2754 ----------------------------------------------------------------------- */
2755 if (!liloconfig)
2756 liloconfig = 1;
2758 memset(&board, 0, sizeof(board));
2760 /* Assume the data is int first, later we can change it */
2761 /* I think that array position 0 of ints holds the number of args */
2762 for (last = 0, index = 1; index <= ints[0]; index++)
2763 switch(index)
2764 { /* Begin parse switch */
2765 case 1:
2766 board.status = ints[index];
2767 /* ---------------------------------------------------------
2768 We check for 2 (As opposed to 1; because 2 is a flag
2769 instructing the driver to ignore epcaconfig.) For this
2770 reason we check for 2.
2771 ------------------------------------------------------------ */
2772 if (board.status == 2) { /* Begin ignore epcaconfig as well as lilo cmd line */
2773 nbdevs = 0;
2774 num_cards = 0;
2775 return;
2776 } /* End ignore epcaconfig as well as lilo cmd line */
2778 if (board.status > 2) {
2779 printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n", board.status);
2780 invalid_lilo_config = 1;
2781 setup_error_code |= INVALID_BOARD_STATUS;
2782 return;
2784 last = index;
2785 break;
2786 case 2:
2787 board.type = ints[index];
2788 if (board.type >= PCIXEM) {
2789 printk(KERN_ERR "epca_setup: Invalid board type 0x%x\n", board.type);
2790 invalid_lilo_config = 1;
2791 setup_error_code |= INVALID_BOARD_TYPE;
2792 return;
2794 last = index;
2795 break;
2796 case 3:
2797 board.altpin = ints[index];
2798 if (board.altpin > 1) {
2799 printk(KERN_ERR "epca_setup: Invalid board altpin 0x%x\n", board.altpin);
2800 invalid_lilo_config = 1;
2801 setup_error_code |= INVALID_ALTPIN;
2802 return;
2804 last = index;
2805 break;
2807 case 4:
2808 board.numports = ints[index];
2809 if (board.numports < 2 || board.numports > 256) {
2810 printk(KERN_ERR "epca_setup: Invalid board numports 0x%x\n", board.numports);
2811 invalid_lilo_config = 1;
2812 setup_error_code |= INVALID_NUM_PORTS;
2813 return;
2815 nbdevs += board.numports;
2816 last = index;
2817 break;
2819 case 5:
2820 board.port = ints[index];
2821 if (ints[index] <= 0) {
2822 printk(KERN_ERR "epca_setup: Invalid io port 0x%x\n", (unsigned int)board.port);
2823 invalid_lilo_config = 1;
2824 setup_error_code |= INVALID_PORT_BASE;
2825 return;
2827 last = index;
2828 break;
2830 case 6:
2831 board.membase = ints[index];
2832 if (ints[index] <= 0) {
2833 printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n",(unsigned int)board.membase);
2834 invalid_lilo_config = 1;
2835 setup_error_code |= INVALID_MEM_BASE;
2836 return;
2838 last = index;
2839 break;
2841 default:
2842 printk(KERN_ERR "<Error> - epca_setup: Too many integer parms\n");
2843 return;
2845 } /* End parse switch */
2847 while (str && *str) { /* Begin while there is a string arg */
2848 /* find the next comma or terminator */
2849 temp = str;
2850 /* While string is not null, and a comma hasn't been found */
2851 while (*temp && (*temp != ','))
2852 temp++;
2853 if (!*temp)
2854 temp = NULL;
2855 else
2856 *temp++ = 0;
2857 /* Set index to the number of args + 1 */
2858 index = last + 1;
2860 switch(index)
2862 case 1:
2863 len = strlen(str);
2864 if (strncmp("Disable", str, len) == 0)
2865 board.status = 0;
2866 else if (strncmp("Enable", str, len) == 0)
2867 board.status = 1;
2868 else {
2869 printk(KERN_ERR "epca_setup: Invalid status %s\n", str);
2870 invalid_lilo_config = 1;
2871 setup_error_code |= INVALID_BOARD_STATUS;
2872 return;
2874 last = index;
2875 break;
2877 case 2:
2878 for(loop = 0; loop < EPCA_NUM_TYPES; loop++)
2879 if (strcmp(board_desc[loop], str) == 0)
2880 break;
2881 /* ---------------------------------------------------------------
2882 If the index incremented above refers to a legitamate board
2883 type set it here.
2884 ------------------------------------------------------------------*/
2885 if (index < EPCA_NUM_TYPES)
2886 board.type = loop;
2887 else {
2888 printk(KERN_ERR "epca_setup: Invalid board type: %s\n", str);
2889 invalid_lilo_config = 1;
2890 setup_error_code |= INVALID_BOARD_TYPE;
2891 return;
2893 last = index;
2894 break;
2896 case 3:
2897 len = strlen(str);
2898 if (strncmp("Disable", str, len) == 0)
2899 board.altpin = 0;
2900 else if (strncmp("Enable", str, len) == 0)
2901 board.altpin = 1;
2902 else {
2903 printk(KERN_ERR "epca_setup: Invalid altpin %s\n", str);
2904 invalid_lilo_config = 1;
2905 setup_error_code |= INVALID_ALTPIN;
2906 return;
2908 last = index;
2909 break;
2911 case 4:
2912 t2 = str;
2913 while (isdigit(*t2))
2914 t2++;
2916 if (*t2) {
2917 printk(KERN_ERR "epca_setup: Invalid port count %s\n", str);
2918 invalid_lilo_config = 1;
2919 setup_error_code |= INVALID_NUM_PORTS;
2920 return;
2923 /* ------------------------------------------------------------
2924 There is not a man page for simple_strtoul but the code can be
2925 found in vsprintf.c. The first argument is the string to
2926 translate (To an unsigned long obviously), the second argument
2927 can be the address of any character variable or a NULL. If a
2928 variable is given, the end pointer of the string will be stored
2929 in that variable; if a NULL is given the end pointer will
2930 not be returned. The last argument is the base to use. If
2931 a 0 is indicated, the routine will attempt to determine the
2932 proper base by looking at the values prefix (A '0' for octal,
2933 a 'x' for hex, etc ... If a value is given it will use that
2934 value as the base.
2935 ---------------------------------------------------------------- */
2936 board.numports = simple_strtoul(str, NULL, 0);
2937 nbdevs += board.numports;
2938 last = index;
2939 break;
2941 case 5:
2942 t2 = str;
2943 while (isxdigit(*t2))
2944 t2++;
2946 if (*t2) {
2947 printk(KERN_ERR "epca_setup: Invalid i/o address %s\n", str);
2948 invalid_lilo_config = 1;
2949 setup_error_code |= INVALID_PORT_BASE;
2950 return;
2953 board.port = simple_strtoul(str, NULL, 16);
2954 last = index;
2955 break;
2957 case 6:
2958 t2 = str;
2959 while (isxdigit(*t2))
2960 t2++;
2962 if (*t2) {
2963 printk(KERN_ERR "epca_setup: Invalid memory base %s\n",str);
2964 invalid_lilo_config = 1;
2965 setup_error_code |= INVALID_MEM_BASE;
2966 return;
2968 board.membase = simple_strtoul(str, NULL, 16);
2969 last = index;
2970 break;
2971 default:
2972 printk(KERN_ERR "epca: Too many string parms\n");
2973 return;
2975 str = temp;
2976 } /* End while there is a string arg */
2978 if (last < 6) {
2979 printk(KERN_ERR "epca: Insufficient parms specified\n");
2980 return;
2983 /* I should REALLY validate the stuff here */
2984 /* Copies our local copy of board into boards */
2985 memcpy((void *)&boards[num_cards],(void *)&board, sizeof(board));
2986 /* Does this get called once per lilo arg are what ? */
2987 printk(KERN_INFO "PC/Xx: Added board %i, %s %i ports at 0x%4.4X base 0x%6.6X\n",
2988 num_cards, board_desc[board.type],
2989 board.numports, (int)board.port, (unsigned int) board.membase);
2990 num_cards++;
2991 } /* End epca_setup */
2994 /* ------------------------ Begin init_PCI --------------------------- */
2996 enum epic_board_types {
2997 brd_xr = 0,
2998 brd_xem,
2999 brd_cx,
3000 brd_xrj,
3004 /* indexed directly by epic_board_types enum */
3005 static struct {
3006 unsigned char board_type;
3007 unsigned bar_idx; /* PCI base address region */
3008 } epca_info_tbl[] = {
3009 { PCIXR, 0, },
3010 { PCIXEM, 0, },
3011 { PCICX, 0, },
3012 { PCIXRJ, 2, },
3015 static int __devinit epca_init_one (struct pci_dev *pdev,
3016 const struct pci_device_id *ent)
3018 static int board_num = -1;
3019 int board_idx, info_idx = ent->driver_data;
3020 unsigned long addr;
3022 if (pci_enable_device(pdev))
3023 return -EIO;
3025 board_num++;
3026 board_idx = board_num + num_cards;
3027 if (board_idx >= MAXBOARDS)
3028 goto err_out;
3030 addr = pci_resource_start (pdev, epca_info_tbl[info_idx].bar_idx);
3031 if (!addr) {
3032 printk (KERN_ERR PFX "PCI region #%d not available (size 0)\n",
3033 epca_info_tbl[info_idx].bar_idx);
3034 goto err_out;
3037 boards[board_idx].status = ENABLED;
3038 boards[board_idx].type = epca_info_tbl[info_idx].board_type;
3039 boards[board_idx].numports = 0x0;
3040 boards[board_idx].port = addr + PCI_IO_OFFSET;
3041 boards[board_idx].membase = addr;
3043 if (!request_mem_region (addr + PCI_IO_OFFSET, 0x200000, "epca")) {
3044 printk (KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
3045 0x200000, addr + PCI_IO_OFFSET);
3046 goto err_out;
3049 boards[board_idx].re_map_port = ioremap(addr + PCI_IO_OFFSET, 0x200000);
3050 if (!boards[board_idx].re_map_port) {
3051 printk (KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
3052 0x200000, addr + PCI_IO_OFFSET);
3053 goto err_out_free_pciio;
3056 if (!request_mem_region (addr, 0x200000, "epca")) {
3057 printk (KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
3058 0x200000, addr);
3059 goto err_out_free_iounmap;
3062 boards[board_idx].re_map_membase = ioremap(addr, 0x200000);
3063 if (!boards[board_idx].re_map_membase) {
3064 printk (KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
3065 0x200000, addr + PCI_IO_OFFSET);
3066 goto err_out_free_memregion;
3069 /* --------------------------------------------------------------
3070 I don't know what the below does, but the hardware guys say
3071 its required on everything except PLX (In this case XRJ).
3072 ---------------------------------------------------------------- */
3073 if (info_idx != brd_xrj) {
3074 pci_write_config_byte(pdev, 0x40, 0);
3075 pci_write_config_byte(pdev, 0x46, 0);
3078 return 0;
3080 err_out_free_memregion:
3081 release_mem_region (addr, 0x200000);
3082 err_out_free_iounmap:
3083 iounmap (boards[board_idx].re_map_port);
3084 err_out_free_pciio:
3085 release_mem_region (addr + PCI_IO_OFFSET, 0x200000);
3086 err_out:
3087 return -ENODEV;
3091 static struct pci_device_id epca_pci_tbl[] = {
3092 { PCI_VENDOR_DIGI, PCI_DEVICE_XR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xr },
3093 { PCI_VENDOR_DIGI, PCI_DEVICE_XEM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xem },
3094 { PCI_VENDOR_DIGI, PCI_DEVICE_CX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_cx },
3095 { PCI_VENDOR_DIGI, PCI_DEVICE_XRJ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xrj },
3096 { 0, }
3099 MODULE_DEVICE_TABLE(pci, epca_pci_tbl);
3101 int __init init_PCI (void)
3102 { /* Begin init_PCI */
3103 memset (&epca_driver, 0, sizeof (epca_driver));
3104 epca_driver.name = "epca";
3105 epca_driver.id_table = epca_pci_tbl;
3106 epca_driver.probe = epca_init_one;
3108 return pci_register_driver(&epca_driver);
3111 MODULE_LICENSE("GPL");