drivers/serial/crisv10.h

   1 /*
   2  * serial.h: Arch-dep definitions for the Etrax100 serial driver.
   3  *
   4  * Copyright (C) 1998, 1999, 2000 Axis Communications AB
   5  */
   6
   7 #ifndef _ETRAX_SERIAL_H
   8 #define _ETRAX_SERIAL_H
   9
  10 #include <linux/circ_buf.h>
  11 #include <asm/termios.h>
  12
  13 /* Software state per channel */
  14
  15 #ifdef __KERNEL__
  16 /*
  17  * This is our internal structure for each serial port's state.
  18  *
  19  * Many fields are paralleled by the structure used by the serial_struct
  20  * structure.
  21  *
  22  * For definitions of the flags field, see tty.h
  23  */
  24
  25 #define SERIAL_RECV_DESCRIPTORS 8
  26
  27 struct etrax_recv_buffer {
  28         struct etrax_recv_buffer *next;
  29         unsigned short length;
  30         unsigned char error;
  31         unsigned char pad;
  32
  33         unsigned char buffer[0];
  34 };
  35
  36 struct e100_serial {
  37         int                     baud;
  38         volatile u8             *port; /* R_SERIALx_CTRL */
  39         u32                     irq;  /* bitnr in R_IRQ_MASK2 for dmaX_descr */
  40
  41         /* Output registers */
  42         volatile u8             *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
  43         volatile u32            *ofirstadr;   /* adr to R_DMA_CHx_FIRST */
  44         volatile u8             *ocmdadr;     /* adr to R_DMA_CHx_CMD */
  45         const volatile u8       *ostatusadr;  /* adr to R_DMA_CHx_STATUS */
  46
  47         /* Input registers */
  48         volatile u8             *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
  49         volatile u32            *ifirstadr;   /* adr to R_DMA_CHx_FIRST */
  50         volatile u8             *icmdadr;     /* adr to R_DMA_CHx_CMD */
  51         volatile u32            *idescradr;   /* adr to R_DMA_CHx_DESCR */
  52
  53         int                     flags;  /* defined in tty.h */
  54
  55         u8                      rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */
  56         u8                      tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */
  57         u8                      iseteop; /* bit number for R_SET_EOP for the input dma */
  58         int                     enabled; /* Set to 1 if the port is enabled in HW config */
  59
  60         u8              dma_out_enabled:1; /* Set to 1 if DMA should be used */
  61         u8              dma_in_enabled:1;  /* Set to 1 if DMA should be used */
  62
  63         /* end of fields defined in rs_table[] in .c-file */
  64         u8              uses_dma_in;  /* Set to 1 if DMA is used */
  65         u8              uses_dma_out; /* Set to 1 if DMA is used */
  66         u8              forced_eop;   /* a fifo eop has been forced */
  67         int                     baud_base;     /* For special baudrates */
  68         int                     custom_divisor; /* For special baudrates */
  69         struct etrax_dma_descr  tr_descr;
  70         struct etrax_dma_descr  rec_descr[SERIAL_RECV_DESCRIPTORS];
  71         int                     cur_rec_descr;
  72
  73         volatile int            tr_running; /* 1 if output is running */
  74
  75         struct tty_struct       *tty;
  76         int                     read_status_mask;
  77         int                     ignore_status_mask;
  78         int                     x_char; /* xon/xoff character */
  79         int                     close_delay;
  80         unsigned short          closing_wait;
  81         unsigned short          closing_wait2;
  82         unsigned long           event;
  83         unsigned long           last_active;
  84         int                     line;
  85         int                     type;  /* PORT_ETRAX */
  86         int                     count;      /* # of fd on device */
  87         int                     blocked_open; /* # of blocked opens */
  88         struct circ_buf         xmit;
  89         struct etrax_recv_buffer *first_recv_buffer;
  90         struct etrax_recv_buffer *last_recv_buffer;
  91         unsigned int            recv_cnt;
  92         unsigned int            max_recv_cnt;
  93
  94         struct work_struct      work;
  95         struct async_icount     icount;   /* error-statistics etc.*/
  96         struct termios          normal_termios;
  97         struct termios          callout_termios;
  98 #ifdef DECLARE_WAITQUEUE
  99         wait_queue_head_t       open_wait;
 100         wait_queue_head_t       close_wait;
 101 #else
 102         struct wait_queue       *open_wait;
 103         struct wait_queue       *close_wait;
 104 #endif
 105
 106         unsigned long           char_time_usec;       /* The time for 1 char, in usecs */
 107         unsigned long           flush_time_usec;      /* How often we should flush */
 108         unsigned long           last_tx_active_usec;  /* Last tx usec in the jiffies */
 109         unsigned long           last_tx_active;       /* Last tx time in jiffies */
 110         unsigned long           last_rx_active_usec;  /* Last rx usec in the jiffies */
 111         unsigned long           last_rx_active;       /* Last rx time in jiffies */
 112
 113         int                     break_detected_cnt;
 114         int                     errorcode;
 115
 116 #ifdef CONFIG_ETRAX_RS485
 117         struct rs485_control    rs485;  /* RS-485 support */
 118 #endif
 119 };
 120
 121 /* this PORT is not in the standard serial.h. it's not actually used for
 122  * anything since we only have one type of async serial-port anyway in this
 123  * system.
 124  */
 125
 126 #define PORT_ETRAX 1
 127
 128 /*
 129  * Events are used to schedule things to happen at timer-interrupt
 130  * time, instead of at rs interrupt time.
 131  */
 132 #define RS_EVENT_WRITE_WAKEUP   0
 133
 134 #endif /* __KERNEL__ */
 135
 136 #endif /* !_ETRAX_SERIAL_H */