?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[NETFILTER]: ip6table_mangle: reroute when nfmark changes in NF_IP6_LOCAL_OUT
[hh.org.git] / sound / oss / aedsp16.c
blob51e1fde62e8d5685bed6fc44ef0fdd9bd0dc896a
1 /*
2 sound/oss/aedsp16.c
3
4 Audio Excel DSP 16 software configuration routines
5 Copyright (C) 1995,1996,1997,1998 Riccardo Facchetti (fizban@tin.it)
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20
21 */
22 /*
23 * Include the main OSS Lite header file. It include all the os, OSS Lite, etc
24 * headers needed by this source.
25 */
26 #include <linux/delay.h>
27 #include <linux/module.h>
28 #include <linux/init.h>
29 #include "sound_config.h"
30
31 /*
32 * Sanity checks
33 */
34
35 #if defined(CONFIG_SOUND_AEDSP16_SBPRO) && defined(CONFIG_SOUND_AEDSP16_MSS)
36 #error You have to enable only one of the MSS and SBPRO emulations.
37 #endif
38
39 /*
40
41 READ THIS
42
43 This module started to configure the Audio Excel DSP 16 Sound Card.
44 Now works with the SC-6000 (old aedsp16) and new SC-6600 based cards.
45
46 NOTE: I have NO idea about Audio Excel DSP 16 III. If someone owns this
47 audio card and want to see the kernel support for it, please contact me.
48
49 Audio Excel DSP 16 is an SB pro II, Microsoft Sound System and MPU-401
50 compatible card.
51 It is software-only configurable (no jumpers to hard-set irq/dma/mpu-irq),
52 so before this module, the only way to configure the DSP under linux was
53 boot the MS-DOS loading the sound.sys device driver (this driver soft-
54 configure the sound board hardware by massaging someone of its registers),
55 and then ctrl-alt-del to boot linux with the DSP configured by the DOS
56 driver.
57
58 This module works configuring your Audio Excel DSP 16's irq, dma and
59 mpu-401-irq. The OSS Lite routines rely on the fact that if the
60 hardware is there, they can detect it. The problem with AEDSP16 is
61 that no hardware can be found by the probe routines if the sound card
62 is not configured properly. Sometimes the kernel probe routines can find
63 an SBPRO even when the card is not configured (this is the standard setup
64 of the card), but the SBPRO emulation don't work well if the card is not
65 properly initialized. For this reason
66
67 aedsp16_init_board()
68
69 routine is called before the OSS Lite probe routines try to detect the
70 hardware.
71
72 NOTE (READ THE NOTE TOO, IT CONTAIN USEFUL INFORMATIONS)
73
74 NOTE: Now it works with SC-6000 and SC-6600 based audio cards. The new cards
75 have no jumper switch at all. No more WSS or MPU-401 I/O port switches. They
76 have to be configured by software.
77
78 NOTE: The driver is merged with the new OSS Lite sound driver. It works
79 as a lowlevel driver.
80
81 The Audio Excel DSP 16 Sound Card emulates both SBPRO and MSS;
82 the OSS Lite sound driver can be configured for SBPRO and MSS cards
83 at the same time, but the aedsp16 can't be two cards!!
84 When we configure it, we have to choose the SBPRO or the MSS emulation
85 for AEDSP16. We also can install a *REAL* card of the other type (see [1]).
86
87 NOTE: If someone can test the combination AEDSP16+MSS or AEDSP16+SBPRO
88 please let me know if it works.
89
90 The MPU-401 support can be compiled in together with one of the other
91 two operating modes.
92
93 NOTE: This is something like plug-and-play: we have only to plug
94 the AEDSP16 board in the socket, and then configure and compile
95 a kernel that uses the AEDSP16 software configuration capability.
96 No jumper setting is needed!
97
98 For example, if you want AEDSP16 to be an SBPro, on irq 10, dma 3
99 you have just to make config the OSS Lite package, configuring
100 the AEDSP16 sound card, then activating the SBPro emulation mode
101 and at last configuring IRQ and DMA.
102 Compile the kernel and run it.
103
104 NOTE: This means for SC-6000 cards that you can choose irq and dma,
105 but not the I/O addresses. To change I/O addresses you have to set
106 them with jumpers. For SC-6600 cards you have no jumpers so you have
107 to set up your full card configuration in the make config.
108
109 You can change the irq/dma/mirq settings WITHOUT THE NEED to open
110 your computer and massage the jumpers (there are no irq/dma/mirq
111 jumpers to be configured anyway, only I/O BASE values have to be
112 configured with jumpers)
113
114 For some ununderstandable reason, the card default of irq 7, dma 1,
115 don't work for me. Seems to be an IRQ or DMA conflict. Under heavy
116 HDD work, the kernel start to erupt out a lot of messages like:
117
118 'Sound: DMA timed out - IRQ/DRQ config error?'
119
120 For what I can say, I have NOT any conflict at irq 7 (under linux I'm
121 using the lp polling driver), and dma line 1 is unused as stated by
122 /proc/dma. I can suppose this is a bug of AEDSP16. I know my hardware so
123 I'm pretty sure I have not any conflict, but may be I'm wrong. Who knows!
124 Anyway a setting of irq 10, dma 3 works really fine.
125
126 NOTE: if someone can use AEDSP16 with irq 7, dma 1, please let me know
127 the emulation mode, all the installed hardware and the hardware
128 configuration (irq and dma settings of all the hardware).
129
130 This init module should work with SBPRO+MSS, when one of the two is
131 the AEDSP16 emulation and the other the real card. (see [1])
132 For example:
133
134 AEDSP16 (0x220) in SBPRO emu (0x220) + real MSS + other
135 AEDSP16 (0x220) in MSS emu + real SBPRO (0x240) + other
136
137 MPU401 should work. (see [2])
138
139 [1]
140 ---
141 Date: Mon, 29 Jul 1997 08:35:40 +0100
142 From: Mr S J Greenaway <sjg95@unixfe.rl.ac.uk>
143
144 [...]
145 Just to let you know got my Audio Excel (emulating a MSS) working
146 with my original SB16, thanks for the driver!
147 [...]
148 ---
149
150 [2] Not tested by me for lack of hardware.
151
152 TODO, WISHES AND TECH
153
154 - About I/O ports allocation -
155
156 Request the 2x0h region (port base) in any case if we are using this card.
157
158 NOTE: the "aedsp16 (base)" string with which we are requesting the aedsp16
159 port base region (see code) does not mean necessarily that we are emulating
160 sbpro. Even if this region is the sbpro I/O ports region, we use this
161 region to access the control registers of the card, and if emulating
162 sbpro, I/O sbpro registers too. If we are emulating MSS, the sbpro
163 registers are not used, in no way, to emulate an sbpro: they are
164 used only for configuration purposes.
165
166 Started Fri Mar 17 16:13:18 MET 1995
167
168 v0.1 (ALPHA, was an user-level program called AudioExcelDSP16.c)
169 - Initial code.
170 v0.2 (ALPHA)
171 - Cleanups.
172 - Integrated with Linux voxware v 2.90-2 kernel sound driver.
173 - SoundBlaster Pro mode configuration.
174 - Microsoft Sound System mode configuration.
175 - MPU-401 mode configuration.
176 v0.3 (ALPHA)
177 - Cleanups.
178 - Rearranged the code to let aedsp16_init_board be more general.
179 - Erased the REALLY_SLOW_IO. We don't need it. Erased the linux/io.h
180 inclusion too. We rely on os.h
181 - Used the to get a variable
182 len string (we are not sure about the len of Copyright string).
183 This works with any SB and compatible.
184 - Added the code to request_region at device init (should go in
185 the main body of voxware).
186 v0.4 (BETA)
187 - Better configure.c patch for aedsp16 configuration (better
188 logic of inclusion of AEDSP16 support)
189 - Modified the conditional compilation to better support more than
190 one sound card of the emulated type (read the NOTES above)
191 - Moved the sb init routine from the attach to the very first
192 probe in sb_card.c
193 - Rearrangements and cleanups
194 - Wiped out some unnecessary code and variables: this is kernel
195 code so it is better save some TEXT and DATA
196 - Fixed the request_region code. We must allocate the aedsp16 (sbpro)
197 I/O ports in any case because they are used to access the DSP
198 configuration registers and we can not allow anyone to get them.
199 v0.5
200 - cleanups on comments
201 - prep for diffs against v3.0-proto-950402
202 v0.6
203 - removed the request_region()s when compiling the MODULE sound.o
204 because we are not allowed (by the actual voxware structure) to
205 release_region()
206 v0.7 (pre ALPHA, not distributed)
207 - started porting this module to kernel 1.3.84. Dummy probe/attach
208 routines.
209 v0.8 (ALPHA)
210 - attached all the init routines.
211 v0.9 (BETA)
212 - Integrated with linux-pre2.0.7
213 - Integrated with configuration scripts.
214 - Cleaned up and beautyfied the code.
215 v0.9.9 (BETA)
216 - Thanks to Piercarlo Grandi: corrected the conditonal compilation code.
217 Now only the code configured is compiled in, with some memory saving.
218 v0.9.10
219 - Integration into the sound/lowlevel/ section of the sound driver.
220 - Re-organized the code.
221 v0.9.11 (not distributed)
222 - Rewritten the init interface-routines to initialize the AEDSP16 in
223 one shot.
224 - More cosmetics.
225 - SC-6600 support.
226 - More soft/hard configuration.
227 v0.9.12
228 - Refined the v0.9.11 code with conditional compilation to distinguish
229 between SC-6000 and SC-6600 code.
230 v1.0.0
231 - Prep for merging with OSS Lite and Linux kernel 2.1.13
232 - Corrected a bug in request/check/release region calls (thanks to the
233 new kernel exception handling).
234 v1.1
235 - Revamped for integration with new modularized sound drivers: to enhance
236 the flexibility of modular version, I have removed all the conditional
237 compilation for SBPRO, MPU and MSS code. Now it is all managed with
238 the ae_config structure.
239 v1.2
240 - Module informations added.
241 - Removed aedsp16_delay_10msec(), now using mdelay(10)
242 - All data and funcs moved to .*.init section.
243 v1.3
244 Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/09/27
245 - got rid of check_region
246
247 Known Problems:
248 - Audio Excel DSP 16 III don't work with this driver.
249
250 Credits:
251 Many thanks to Gerald Britton <gbritton@CapAccess.org>. He helped me a
252 lot in testing the 0.9.11 and 0.9.12 versions of this driver.
253
254 */
255
256
257 #define VERSION "1.3" /* Version of Audio Excel DSP 16 driver */
258
259 #undef AEDSP16_DEBUG /* Define this to 1 to enable debug code */
260 #undef AEDSP16_DEBUG_MORE /* Define this to 1 to enable more debug */
261 #undef AEDSP16_INFO /* Define this to 1 to enable info code */
262
263 #if defined(AEDSP16_DEBUG)
264 # define DBG(x) printk x
265 # if defined(AEDSP16_DEBUG_MORE)
266 # define DBG1(x) printk x
267 # else
268 # define DBG1(x)
269 # endif
270 #else
271 # define DBG(x)
272 # define DBG1(x)
273 #endif
274
275 /*
276 * Misc definitions
277 */
278 #define TRUE 1
279 #define FALSE 0
280
281 /*
282 * Region Size for request/check/release region.
283 */
284 #define IOBASE_REGION_SIZE 0x10
285
286 /*
287 * Hardware related defaults
288 */
289 #define DEF_AEDSP16_IOB 0x220 /* 0x220(default) 0x240 */
290 #define DEF_AEDSP16_IRQ 7 /* 5 7(default) 9 10 11 */
291 #define DEF_AEDSP16_MRQ 0 /* 5 7 9 10 0(default), 0 means disable */
292 #define DEF_AEDSP16_DMA 1 /* 0 1(default) 3 */
293
294 /*
295 * Commands of AEDSP16's DSP (SBPRO+special).
296 * Some of them are COMMAND_xx, in the future they may change.
297 */
298 #define WRITE_MDIRQ_CFG 0x50 /* Set M&I&DRQ mask (the real config) */
299 #define COMMAND_52 0x52 /* */
300 #define READ_HARD_CFG 0x58 /* Read Hardware Config (I/O base etc) */
301 #define COMMAND_5C 0x5c /* */
302 #define COMMAND_60 0x60 /* */
303 #define COMMAND_66 0x66 /* */
304 #define COMMAND_6C 0x6c /* */
305 #define COMMAND_6E 0x6e /* */
306 #define COMMAND_88 0x88 /* */
307 #define DSP_INIT_MSS 0x8c /* Enable Microsoft Sound System mode */
308 #define COMMAND_C5 0xc5 /* */
309 #define GET_DSP_VERSION 0xe1 /* Get DSP Version */
310 #define GET_DSP_COPYRIGHT 0xe3 /* Get DSP Copyright */
311
312 /*
313 * Offsets of AEDSP16 DSP I/O ports. The offset is added to base I/O port
314 * to have the actual I/O port.
315 * Register permissions are:
316 * (wo) == Write Only
317 * (ro) == Read Only
318 * (w-) == Write
319 * (r-) == Read
320 */
321 #define DSP_RESET 0x06 /* offset of DSP RESET (wo) */
322 #define DSP_READ 0x0a /* offset of DSP READ (ro) */
323 #define DSP_WRITE 0x0c /* offset of DSP WRITE (w-) */
324 #define DSP_COMMAND 0x0c /* offset of DSP COMMAND (w-) */
325 #define DSP_STATUS 0x0c /* offset of DSP STATUS (r-) */
326 #define DSP_DATAVAIL 0x0e /* offset of DSP DATA AVAILABLE (ro) */
327
328
329 #define RETRY 10 /* Various retry values on I/O opera- */
330 #define STATUSRETRY 1000 /* tions. Sometimes we have to */
331 #define HARDRETRY 500000 /* wait for previous cmd to complete */
332
333 /*
334 * Size of character arrays that store name and version of sound card
335 */
336 #define CARDNAMELEN 15 /* Size of the card's name in chars */
337 #define CARDVERLEN 2 /* Size of the card's version in chars */
338
339 #if defined(CONFIG_SC6600)
340 /*
341 * Bitmapped flags of hard configuration
342 */
343 /*
344 * Decode macros (xl == low byte, xh = high byte)
345 */
346 #define IOBASE(xl) ((xl & 0x01)?0x240:0x220)
347 #define JOY(xl) (xl & 0x02)
348 #define MPUADDR(xl) ( \
349 (xl & 0x0C)?0x330: \
350 (xl & 0x08)?0x320: \
351 (xl & 0x04)?0x310: \
352 0x300)
353 #define WSSADDR(xl) ((xl & 0x10)?0xE80:0x530)
354 #define CDROM(xh) (xh & 0x20)
355 #define CDROMADDR(xh) (((xh & 0x1F) << 4) + 0x200)
356 /*
357 * Encode macros
358 */
359 #define BLDIOBASE(xl, val) { \
360 xl &= ~0x01; \
361 if (val == 0x240) \
362 xl |= 0x01; \
363 }
364 #define BLDJOY(xl, val) { \
365 xl &= ~0x02; \
366 if (val == 1) \
367 xl |= 0x02; \
368 }
369 #define BLDMPUADDR(xl, val) { \
370 xl &= ~0x0C; \
371 switch (val) { \
372 case 0x330: \
373 xl |= 0x0C; \
374 break; \
375 case 0x320: \
376 xl |= 0x08; \
377 break; \
378 case 0x310: \
379 xl |= 0x04; \
380 break; \
381 case 0x300: \
382 xl |= 0x00; \
383 break; \
384 default: \
385 xl |= 0x00; \
386 break; \
387 } \
388 }
389 #define BLDWSSADDR(xl, val) { \
390 xl &= ~0x10; \
391 if (val == 0xE80) \
392 xl |= 0x10; \
393 }
394 #define BLDCDROM(xh, val) { \
395 xh &= ~0x20; \
396 if (val == 1) \
397 xh |= 0x20; \
398 }
399 #define BLDCDROMADDR(xh, val) { \
400 int tmp = val; \
401 tmp -= 0x200; \
402 tmp >>= 4; \
403 tmp &= 0x1F; \
404 xh |= tmp; \
405 xh &= 0x7F; \
406 xh |= 0x40; \
407 }
408 #endif /* CONFIG_SC6600 */
409
410 /*
411 * Bit mapped flags for calling aedsp16_init_board(), and saving the current
412 * emulation mode.
413 */
414 #define INIT_NONE (0 )
415 #define INIT_SBPRO (1<<0)
416 #define INIT_MSS (1<<1)
417 #define INIT_MPU401 (1<<2)
418
419 static int soft_cfg __initdata = 0; /* bitmapped config */
420 static int soft_cfg_mss __initdata = 0; /* bitmapped mss config */
421 static int ver[CARDVERLEN] __initdata = {0, 0}; /* DSP Ver:
422 hi->ver[0] lo->ver[1] */
423
424 #if defined(CONFIG_SC6600)
425 static int hard_cfg[2] /* lo<-hard_cfg[0] hi<-hard_cfg[1] */
426 __initdata = { 0, 0};
427 #endif /* CONFIG_SC6600 */
428
429 #if defined(CONFIG_SC6600)
430 /* Decoded hard configuration */
431 struct d_hcfg {
432 int iobase;
433 int joystick;
434 int mpubase;
435 int wssbase;
436 int cdrom;
437 int cdrombase;
438 };
439
440 static struct d_hcfg decoded_hcfg __initdata = {0, };
441
442 #endif /* CONFIG_SC6600 */
443
444 /* orVals contain the values to be or'ed */
445 struct orVals {
446 int val; /* irq|mirq|dma */
447 int or; /* soft_cfg |= TheStruct.or */
448 };
449
450 /* aedsp16_info contain the audio card configuration */
451 struct aedsp16_info {
452 int base_io; /* base I/O address for accessing card */
453 int irq; /* irq value for DSP I/O */
454 int mpu_irq; /* irq for mpu401 interface I/O */
455 int dma; /* dma value for DSP I/O */
456 int mss_base; /* base I/O for Microsoft Sound System */
457 int mpu_base; /* base I/O for MPU-401 emulation */
458 int init; /* Initialization status of the card */
459 };
460
461 /*
462 * Magic values that the DSP will eat when configuring irq/mirq/dma
463 */
464 /* DSP IRQ conversion array */
465 static struct orVals orIRQ[] __initdata = {
466 {0x05, 0x28},
467 {0x07, 0x08},
468 {0x09, 0x10},
469 {0x0a, 0x18},
470 {0x0b, 0x20},
471 {0x00, 0x00}
472 };
473
474 /* MPU-401 IRQ conversion array */
475 static struct orVals orMIRQ[] __initdata = {
476 {0x05, 0x04},
477 {0x07, 0x44},
478 {0x09, 0x84},
479 {0x0a, 0xc4},
480 {0x00, 0x00}
481 };
482
483 /* DMA Channels conversion array */
484 static struct orVals orDMA[] __initdata = {
485 {0x00, 0x01},
486 {0x01, 0x02},
487 {0x03, 0x03},
488 {0x00, 0x00}
489 };
490
491 static struct aedsp16_info ae_config = {
492 DEF_AEDSP16_IOB,
493 DEF_AEDSP16_IRQ,
494 DEF_AEDSP16_MRQ,
495 DEF_AEDSP16_DMA,
496 -1,
497 -1,
498 INIT_NONE
499 };
500
501 /*
502 * Buffers to store audio card informations
503 */
504 static char DSPCopyright[CARDNAMELEN + 1] __initdata = {0, };
505 static char DSPVersion[CARDVERLEN + 1] __initdata = {0, };
506
507 static int __init aedsp16_wait_data(int port)
508 {
509 int loop = STATUSRETRY;
510 unsigned char ret = 0;
511
512 DBG1(("aedsp16_wait_data (0x%x): ", port));
513
514 do {
515 ret = inb(port + DSP_DATAVAIL);
516 /*
517 * Wait for data available (bit 7 of ret == 1)
518 */
519 } while (!(ret & 0x80) && loop--);
520
521 if (ret & 0x80) {
522 DBG1(("success.\n"));
523 return TRUE;
524 }
525
526 DBG1(("failure.\n"));
527 return FALSE;
528 }
529
530 static int __init aedsp16_read(int port)
531 {
532 int inbyte;
533
534 DBG((" Read DSP Byte (0x%x): ", port));
535
536 if (aedsp16_wait_data(port) == FALSE) {
537 DBG(("failure.\n"));
538 return -1;
539 }
540
541 inbyte = inb(port + DSP_READ);
542
543 DBG(("read [0x%x]/{%c}.\n", inbyte, inbyte));
544
545 return inbyte;
546 }
547
548 static int __init aedsp16_test_dsp(int port)
549 {
550 return ((aedsp16_read(port) == 0xaa) ? TRUE : FALSE);
551 }
552
553 static int __init aedsp16_dsp_reset(int port)
554 {
555 /*
556 * Reset DSP
557 */
558
559 DBG(("Reset DSP:\n"));
560
561 outb(1, (port + DSP_RESET));
562 udelay(10);
563 outb(0, (port + DSP_RESET));
564 udelay(10);
565 udelay(10);
566 if (aedsp16_test_dsp(port) == TRUE) {
567 DBG(("success.\n"));
568 return TRUE;
569 } else
570 DBG(("failure.\n"));
571 return FALSE;
572 }
573
574 static int __init aedsp16_write(int port, int cmd)
575 {
576 unsigned char ret;
577 int loop = HARDRETRY;
578
579 DBG((" Write DSP Byte (0x%x) [0x%x]: ", port, cmd));
580
581 do {
582 ret = inb(port + DSP_STATUS);
583 /*
584 * DSP ready to receive data if bit 7 of ret == 0
585 */
586 if (!(ret & 0x80)) {
587 outb(cmd, port + DSP_COMMAND);
588 DBG(("success.\n"));
589 return 0;
590 }
591 } while (loop--);
592
593 DBG(("timeout.\n"));
594 printk("[AEDSP16] DSP Command (0x%x) timeout.\n", cmd);
595
596 return -1;
597 }
598
599 #if defined(CONFIG_SC6600)
600
601 #if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
602 void __init aedsp16_pinfo(void) {
603 DBG(("\n Base address: %x\n", decoded_hcfg.iobase));
604 DBG((" Joystick : %s present\n", decoded_hcfg.joystick?"":" not"));
605 DBG((" WSS addr : %x\n", decoded_hcfg.wssbase));
606 DBG((" MPU-401 addr: %x\n", decoded_hcfg.mpubase));
607 DBG((" CDROM : %s present\n", (decoded_hcfg.cdrom!=4)?"":" not"));
608 DBG((" CDROMADDR : %x\n\n", decoded_hcfg.cdrombase));
609 }
610 #endif
611
612 static void __init aedsp16_hard_decode(void) {
613
614 DBG((" aedsp16_hard_decode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
615
616 /*
617 * Decode Cfg Bytes.
618 */
619 decoded_hcfg.iobase = IOBASE(hard_cfg[0]);
620 decoded_hcfg.joystick = JOY(hard_cfg[0]);
621 decoded_hcfg.wssbase = WSSADDR(hard_cfg[0]);
622 decoded_hcfg.mpubase = MPUADDR(hard_cfg[0]);
623 decoded_hcfg.cdrom = CDROM(hard_cfg[1]);
624 decoded_hcfg.cdrombase = CDROMADDR(hard_cfg[1]);
625
626 #if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
627 printk(" Original sound card configuration:\n");
628 aedsp16_pinfo();
629 #endif
630
631 /*
632 * Now set up the real kernel configuration.
633 */
634 decoded_hcfg.iobase = ae_config.base_io;
635 decoded_hcfg.wssbase = ae_config.mss_base;
636 decoded_hcfg.mpubase = ae_config.mpu_base;
637
638 #if defined(CONFIG_SC6600_JOY)
639 decoded_hcfg.joystick = CONFIG_SC6600_JOY; /* Enable */
640 #endif
641 #if defined(CONFIG_SC6600_CDROM)
642 decoded_hcfg.cdrom = CONFIG_SC6600_CDROM; /* 4:N-3:I-2:G-1:P-0:S */
643 #endif
644 #if defined(CONFIG_SC6600_CDROMBASE)
645 decoded_hcfg.cdrombase = CONFIG_SC6600_CDROMBASE; /* 0 Disable */
646 #endif
647
648 #if defined(AEDSP16_DEBUG)
649 DBG((" New Values:\n"));
650 aedsp16_pinfo();
651 #endif
652
653 DBG(("success.\n"));
654 }
655
656 static void __init aedsp16_hard_encode(void) {
657
658 DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
659
660 hard_cfg[0] = 0;
661 hard_cfg[1] = 0;
662
663 hard_cfg[0] |= 0x20;
664
665 BLDIOBASE (hard_cfg[0], decoded_hcfg.iobase);
666 BLDWSSADDR(hard_cfg[0], decoded_hcfg.wssbase);
667 BLDMPUADDR(hard_cfg[0], decoded_hcfg.mpubase);
668 BLDJOY(hard_cfg[0], decoded_hcfg.joystick);
669 BLDCDROM(hard_cfg[1], decoded_hcfg.cdrom);
670 BLDCDROMADDR(hard_cfg[1], decoded_hcfg.cdrombase);
671
672 #if defined(AEDSP16_DEBUG)
673 aedsp16_pinfo();
674 #endif
675
676 DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
677 DBG(("success.\n"));
678
679 }
680
681 static int __init aedsp16_hard_write(int port) {
682
683 DBG(("aedsp16_hard_write:\n"));
684
685 if (aedsp16_write(port, COMMAND_6C)) {
686 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6C);
687 DBG(("failure.\n"));
688 return FALSE;
689 }
690 if (aedsp16_write(port, COMMAND_5C)) {
691 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
692 DBG(("failure.\n"));
693 return FALSE;
694 }
695 if (aedsp16_write(port, hard_cfg[0])) {
696 printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[0]);
697 DBG(("failure.\n"));
698 return FALSE;
699 }
700 if (aedsp16_write(port, hard_cfg[1])) {
701 printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[1]);
702 DBG(("failure.\n"));
703 return FALSE;
704 }
705 if (aedsp16_write(port, COMMAND_C5)) {
706 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_C5);
707 DBG(("failure.\n"));
708 return FALSE;
709 }
710
711 DBG(("success.\n"));
712
713 return TRUE;
714 }
715
716 static int __init aedsp16_hard_read(int port) {
717
718 DBG(("aedsp16_hard_read:\n"));
719
720 if (aedsp16_write(port, READ_HARD_CFG)) {
721 printk("[AEDSP16] CMD 0x%x: failed!\n", READ_HARD_CFG);
722 DBG(("failure.\n"));
723 return FALSE;
724 }
725
726 if ((hard_cfg[0] = aedsp16_read(port)) == -1) {
727 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
728 READ_HARD_CFG);
729 DBG(("failure.\n"));
730 return FALSE;
731 }
732 if ((hard_cfg[1] = aedsp16_read(port)) == -1) {
733 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
734 READ_HARD_CFG);
735 DBG(("failure.\n"));
736 return FALSE;
737 }
738 if (aedsp16_read(port) == -1) {
739 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
740 READ_HARD_CFG);
741 DBG(("failure.\n"));
742 return FALSE;
743 }
744
745 DBG(("success.\n"));
746
747 return TRUE;
748 }
749
750 static int __init aedsp16_ext_cfg_write(int port) {
751
752 int extcfg, val;
753
754 if (aedsp16_write(port, COMMAND_66)) {
755 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_66);
756 return FALSE;
757 }
758
759 extcfg = 7;
760 if (decoded_hcfg.cdrom != 2)
761 extcfg = 0x0F;
762 if ((decoded_hcfg.cdrom == 4) ||
763 (decoded_hcfg.cdrom == 3))
764 extcfg &= ~2;
765 if (decoded_hcfg.cdrombase == 0)
766 extcfg &= ~2;
767 if (decoded_hcfg.mpubase == 0)
768 extcfg &= ~1;
769
770 if (aedsp16_write(port, extcfg)) {
771 printk("[AEDSP16] Write extcfg: failed!\n");
772 return FALSE;
773 }
774 if (aedsp16_write(port, 0)) {
775 printk("[AEDSP16] Write extcfg: failed!\n");
776 return FALSE;
777 }
778 if (decoded_hcfg.cdrom == 3) {
779 if (aedsp16_write(port, COMMAND_52)) {
780 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
781 return FALSE;
782 }
783 if ((val = aedsp16_read(port)) == -1) {
784 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n"
785 , COMMAND_52);
786 return FALSE;
787 }
788 val &= 0x7F;
789 if (aedsp16_write(port, COMMAND_60)) {
790 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
791 return FALSE;
792 }
793 if (aedsp16_write(port, val)) {
794 printk("[AEDSP16] Write val: failed!\n");
795 return FALSE;
796 }
797 }
798
799 return TRUE;
800 }
801
802 #endif /* CONFIG_SC6600 */
803
804 static int __init aedsp16_cfg_write(int port) {
805 if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
806 printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
807 return FALSE;
808 }
809 if (aedsp16_write(port, soft_cfg)) {
810 printk("[AEDSP16] Initialization of (M)IRQ and DMA: failed!\n");
811 return FALSE;
812 }
813 return TRUE;
814 }
815
816 static int __init aedsp16_init_mss(int port)
817 {
818 DBG(("aedsp16_init_mss:\n"));
819
820 mdelay(10);
821
822 if (aedsp16_write(port, DSP_INIT_MSS)) {
823 printk("[AEDSP16] aedsp16_init_mss [0x%x]: failed!\n",
824 DSP_INIT_MSS);
825 DBG(("failure.\n"));
826 return FALSE;
827 }
828
829 mdelay(10);
830
831 if (aedsp16_cfg_write(port) == FALSE)
832 return FALSE;
833
834 outb(soft_cfg_mss, ae_config.mss_base);
835
836 DBG(("success.\n"));
837
838 return TRUE;
839 }
840
841 static int __init aedsp16_setup_board(int port) {
842 int loop = RETRY;
843
844 #if defined(CONFIG_SC6600)
845 int val = 0;
846
847 if (aedsp16_hard_read(port) == FALSE) {
848 printk("[AEDSP16] aedsp16_hard_read: failed!\n");
849 return FALSE;
850 }
851
852 if (aedsp16_write(port, COMMAND_52)) {
853 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
854 return FALSE;
855 }
856
857 if ((val = aedsp16_read(port)) == -1) {
858 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
859 COMMAND_52);
860 return FALSE;
861 }
862 #endif
863
864 do {
865 if (aedsp16_write(port, COMMAND_88)) {
866 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_88);
867 return FALSE;
868 }
869 mdelay(10);
870 } while ((aedsp16_wait_data(port) == FALSE) && loop--);
871
872 if (aedsp16_read(port) == -1) {
873 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
874 COMMAND_88);
875 return FALSE;
876 }
877
878 #if !defined(CONFIG_SC6600)
879 if (aedsp16_write(port, COMMAND_5C)) {
880 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
881 return FALSE;
882 }
883 #endif
884
885 if (aedsp16_cfg_write(port) == FALSE)
886 return FALSE;
887
888 #if defined(CONFIG_SC6600)
889 if (aedsp16_write(port, COMMAND_60)) {
890 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
891 return FALSE;
892 }
893 if (aedsp16_write(port, val)) {
894 printk("[AEDSP16] DATA 0x%x: failed!\n", val);
895 return FALSE;
896 }
897 if (aedsp16_write(port, COMMAND_6E)) {
898 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6E);
899 return FALSE;
900 }
901 if (aedsp16_write(port, ver[0])) {
902 printk("[AEDSP16] DATA 0x%x: failed!\n", ver[0]);
903 return FALSE;
904 }
905 if (aedsp16_write(port, ver[1])) {
906 printk("[AEDSP16] DATA 0x%x: failed!\n", ver[1]);
907 return FALSE;
908 }
909
910 if (aedsp16_hard_write(port) == FALSE) {
911 printk("[AEDSP16] aedsp16_hard_write: failed!\n");
912 return FALSE;
913 }
914
915 if (aedsp16_write(port, COMMAND_5C)) {
916 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
917 return FALSE;
918 }
919
920 #if defined(THIS_IS_A_THING_I_HAVE_NOT_TESTED_YET)
921 if (aedsp16_cfg_write(port) == FALSE)
922 return FALSE;
923 #endif
924
925 #endif
926
927 return TRUE;
928 }
929
930 static int __init aedsp16_stdcfg(int port) {
931 if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
932 printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
933 return FALSE;
934 }
935 /*
936 * 0x0A == (IRQ 7, DMA 1, MIRQ 0)
937 */
938 if (aedsp16_write(port, 0x0A)) {
939 printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
940 return FALSE;
941 }
942 return TRUE;
943 }
944
945 static int __init aedsp16_dsp_version(int port)
946 {
947 int len = 0;
948 int ret;
949
950 DBG(("Get DSP Version:\n"));
951
952 if (aedsp16_write(ae_config.base_io, GET_DSP_VERSION)) {
953 printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_VERSION);
954 DBG(("failed.\n"));
955 return FALSE;
956 }
957
958 do {
959 if ((ret = aedsp16_read(port)) == -1) {
960 DBG(("failed.\n"));
961 return FALSE;
962 }
963 /*
964 * We already know how many int are stored (2), so we know when the
965 * string is finished.
966 */
967 ver[len++] = ret;
968 } while (len < CARDVERLEN);
969 sprintf(DSPVersion, "%d.%d", ver[0], ver[1]);
970
971 DBG(("success.\n"));
972
973 return TRUE;
974 }
975
976 static int __init aedsp16_dsp_copyright(int port)
977 {
978 int len = 0;
979 int ret;
980
981 DBG(("Get DSP Copyright:\n"));
982
983 if (aedsp16_write(ae_config.base_io, GET_DSP_COPYRIGHT)) {
984 printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_COPYRIGHT);
985 DBG(("failed.\n"));
986 return FALSE;
987 }
988
989 do {
990 if ((ret = aedsp16_read(port)) == -1) {
991 /*
992 * If no more data available, return to the caller, no error if len>0.
993 * We have no other way to know when the string is finished.
994 */
995 if (len)
996 break;
997 else {
998 DBG(("failed.\n"));
999 return FALSE;
1000 }
1001 }
1002
1003 DSPCopyright[len++] = ret;
1004
1005 } while (len < CARDNAMELEN);
1006
1007 DBG(("success.\n"));
1008
1009 return TRUE;
1010 }
1011
1012 static void __init aedsp16_init_tables(void)
1013 {
1014 int i = 0;
1015
1016 memset(DSPCopyright, 0, CARDNAMELEN + 1);
1017 memset(DSPVersion, 0, CARDVERLEN + 1);
1018
1019 for (i = 0; orIRQ[i].or; i++)
1020 if (orIRQ[i].val == ae_config.irq) {
1021 soft_cfg |= orIRQ[i].or;
1022 soft_cfg_mss |= orIRQ[i].or;
1023 }
1024
1025 for (i = 0; orMIRQ[i].or; i++)
1026 if (orMIRQ[i].or == ae_config.mpu_irq)
1027 soft_cfg |= orMIRQ[i].or;
1028
1029 for (i = 0; orDMA[i].or; i++)
1030 if (orDMA[i].val == ae_config.dma) {
1031 soft_cfg |= orDMA[i].or;
1032 soft_cfg_mss |= orDMA[i].or;
1033 }
1034 }
1035
1036 static int __init aedsp16_init_board(void)
1037 {
1038 aedsp16_init_tables();
1039
1040 if (aedsp16_dsp_reset(ae_config.base_io) == FALSE) {
1041 printk("[AEDSP16] aedsp16_dsp_reset: failed!\n");
1042 return FALSE;
1043 }
1044 if (aedsp16_dsp_copyright(ae_config.base_io) == FALSE) {
1045 printk("[AEDSP16] aedsp16_dsp_copyright: failed!\n");
1046 return FALSE;
1047 }
1048
1049 /*
1050 * My AEDSP16 card return SC-6000 in DSPCopyright, so
1051 * if we have something different, we have to be warned.
1052 */
1053 if (strcmp("SC-6000", DSPCopyright))
1054 printk("[AEDSP16] Warning: non SC-6000 audio card!\n");
1055
1056 if (aedsp16_dsp_version(ae_config.base_io) == FALSE) {
1057 printk("[AEDSP16] aedsp16_dsp_version: failed!\n");
1058 return FALSE;
1059 }
1060
1061 if (aedsp16_stdcfg(ae_config.base_io) == FALSE) {
1062 printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
1063 return FALSE;
1064 }
1065
1066 #if defined(CONFIG_SC6600)
1067 if (aedsp16_hard_read(ae_config.base_io) == FALSE) {
1068 printk("[AEDSP16] aedsp16_hard_read: failed!\n");
1069 return FALSE;
1070 }
1071
1072 aedsp16_hard_decode();
1073
1074 aedsp16_hard_encode();
1075
1076 if (aedsp16_hard_write(ae_config.base_io) == FALSE) {
1077 printk("[AEDSP16] aedsp16_hard_write: failed!\n");
1078 return FALSE;
1079 }
1080
1081 if (aedsp16_ext_cfg_write(ae_config.base_io) == FALSE) {
1082 printk("[AEDSP16] aedsp16_ext_cfg_write: failed!\n");
1083 return FALSE;
1084 }
1085 #endif /* CONFIG_SC6600 */
1086
1087 if (aedsp16_setup_board(ae_config.base_io) == FALSE) {
1088 printk("[AEDSP16] aedsp16_setup_board: failed!\n");
1089 return FALSE;
1090 }
1091
1092 if (ae_config.mss_base != -1) {
1093 if (ae_config.init & INIT_MSS) {
1094 if (aedsp16_init_mss(ae_config.base_io) == FALSE) {
1095 printk("[AEDSP16] Can not initialize"
1096 "Microsoft Sound System mode.\n");
1097 return FALSE;
1098 }
1099 }
1100 }
1101
1102 #if !defined(MODULE) || defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
1103
1104 printk("Audio Excel DSP 16 init v%s (%s %s) [",
1105 VERSION, DSPCopyright,
1106 DSPVersion);
1107
1108 if (ae_config.mpu_base != -1) {
1109 if (ae_config.init & INIT_MPU401) {
1110 printk("MPU401");
1111 if ((ae_config.init & INIT_MSS) ||
1112 (ae_config.init & INIT_SBPRO))
1113 printk(" ");
1114 }
1115 }
1116
1117 if (ae_config.mss_base == -1) {
1118 if (ae_config.init & INIT_SBPRO) {
1119 printk("SBPro");
1120 if (ae_config.init & INIT_MSS)
1121 printk(" ");
1122 }
1123 }
1124
1125 if (ae_config.mss_base != -1)
1126 if (ae_config.init & INIT_MSS)
1127 printk("MSS");
1128
1129 printk("]\n");
1130 #endif /* MODULE || AEDSP16_INFO || AEDSP16_DEBUG */
1131
1132 mdelay(10);
1133
1134 return TRUE;
1135 }
1136
1137 static int __init init_aedsp16_sb(void)
1138 {
1139 DBG(("init_aedsp16_sb: "));
1140
1141 /*
1142 * If the card is already init'ed MSS, we can not init it to SBPRO too
1143 * because the board can not emulate simultaneously MSS and SBPRO.
1144 */
1145 if (ae_config.init & INIT_MSS)
1146 return FALSE;
1147 if (ae_config.init & INIT_SBPRO)
1148 return FALSE;
1149
1150 ae_config.init |= INIT_SBPRO;
1151
1152 DBG(("done.\n"));
1153
1154 return TRUE;
1155 }
1156
1157 static void uninit_aedsp16_sb(void)
1158 {
1159 DBG(("uninit_aedsp16_sb: "));
1160
1161 ae_config.init &= ~INIT_SBPRO;
1162
1163 DBG(("done.\n"));
1164 }
1165
1166 static int __init init_aedsp16_mss(void)
1167 {
1168 DBG(("init_aedsp16_mss: "));
1169
1170 /*
1171 * If the card is already init'ed SBPRO, we can not init it to MSS too
1172 * because the board can not emulate simultaneously MSS and SBPRO.
1173 */
1174 if (ae_config.init & INIT_SBPRO)
1175 return FALSE;
1176 if (ae_config.init & INIT_MSS)
1177 return FALSE;
1178 /*
1179 * We must allocate the CONFIG_AEDSP16_BASE region too because these are the
1180 * I/O ports to access card's control registers.
1181 */
1182 if (!(ae_config.init & INIT_MPU401)) {
1183 if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
1184 "aedsp16 (base)")) {
1185 printk(
1186 "AEDSP16 BASE I/O port region is already in use.\n");
1187 return FALSE;
1188 }
1189 }
1190
1191 ae_config.init |= INIT_MSS;
1192
1193 DBG(("done.\n"));
1194
1195 return TRUE;
1196 }
1197
1198 static void uninit_aedsp16_mss(void)
1199 {
1200 DBG(("uninit_aedsp16_mss: "));
1201
1202 if ((!(ae_config.init & INIT_MPU401)) &&
1203 (ae_config.init & INIT_MSS)) {
1204 release_region(ae_config.base_io, IOBASE_REGION_SIZE);
1205 DBG(("AEDSP16 base region released.\n"));
1206 }
1207
1208 ae_config.init &= ~INIT_MSS;
1209 DBG(("done.\n"));
1210 }
1211
1212 static int __init init_aedsp16_mpu(void)
1213 {
1214 DBG(("init_aedsp16_mpu: "));
1215
1216 if (ae_config.init & INIT_MPU401)
1217 return FALSE;
1218
1219 /*
1220 * We must request the CONFIG_AEDSP16_BASE region too because these are the I/O
1221 * ports to access card's control registers.
1222 */
1223 if (!(ae_config.init & (INIT_MSS | INIT_SBPRO))) {
1224 if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
1225 "aedsp16 (base)")) {
1226 printk(
1227 "AEDSP16 BASE I/O port region is already in use.\n");
1228 return FALSE;
1229 }
1230 }
1231
1232 ae_config.init |= INIT_MPU401;
1233
1234 DBG(("done.\n"));
1235
1236 return TRUE;
1237 }
1238
1239 static void uninit_aedsp16_mpu(void)
1240 {
1241 DBG(("uninit_aedsp16_mpu: "));
1242
1243 if ((!(ae_config.init & (INIT_MSS | INIT_SBPRO))) &&
1244 (ae_config.init & INIT_MPU401)) {
1245 release_region(ae_config.base_io, IOBASE_REGION_SIZE);
1246 DBG(("AEDSP16 base region released.\n"));
1247 }
1248
1249 ae_config.init &= ~INIT_MPU401;
1250
1251 DBG(("done.\n"));
1252 }
1253
1254 static int __init init_aedsp16(void)
1255 {
1256 int initialized = FALSE;
1257
1258 DBG(("Initializing BASE[0x%x] IRQ[%d] DMA[%d] MIRQ[%d]\n",
1259 ae_config.base_io,ae_config.irq,ae_config.dma,ae_config.mpu_irq));
1260
1261 if (ae_config.mss_base == -1) {
1262 if (init_aedsp16_sb() == FALSE) {
1263 uninit_aedsp16_sb();
1264 } else {
1265 initialized = TRUE;
1266 }
1267 }
1268
1269 if (ae_config.mpu_base != -1) {
1270 if (init_aedsp16_mpu() == FALSE) {
1271 uninit_aedsp16_mpu();
1272 } else {
1273 initialized = TRUE;
1274 }
1275 }
1276
1277 /*
1278 * In the sequence of init routines, the MSS init MUST be the last!
1279 * This because of the special register programming the MSS mode needs.
1280 * A board reset would disable the MSS mode restoring the default SBPRO
1281 * mode.
1282 */
1283 if (ae_config.mss_base != -1) {
1284 if (init_aedsp16_mss() == FALSE) {
1285 uninit_aedsp16_mss();
1286 } else {
1287 initialized = TRUE;
1288 }
1289 }
1290
1291 if (initialized)
1292 initialized = aedsp16_init_board();
1293 return initialized;
1294 }
1295
1296 static void __exit uninit_aedsp16(void)
1297 {
1298 if (ae_config.mss_base != -1)
1299 uninit_aedsp16_mss();
1300 else
1301 uninit_aedsp16_sb();
1302 if (ae_config.mpu_base != -1)
1303 uninit_aedsp16_mpu();
1304 }
1305
1306 static int __initdata io = -1;
1307 static int __initdata irq = -1;
1308 static int __initdata dma = -1;
1309 static int __initdata mpu_irq = -1;
1310 static int __initdata mss_base = -1;
1311 static int __initdata mpu_base = -1;
1312
1313 module_param(io, int, 0);
1314 MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)");
1315 module_param(irq, int, 0);
1316 MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)");
1317 module_param(dma, int, 0);
1318 MODULE_PARM_DESC(dma, "dma line (0 1 3)");
1319 module_param(mpu_irq, int, 0);
1320 MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)");
1321 module_param(mss_base, int, 0);
1322 MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)");
1323 module_param(mpu_base, int, 0);
1324 MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)");
1325 MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>");
1326 MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION);
1327 MODULE_LICENSE("GPL");
1328
1329 static int __init do_init_aedsp16(void) {
1330 printk("Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98\n");
1331 if (io == -1 || dma == -1 || irq == -1) {
1332 printk(KERN_INFO "aedsp16: I/O, IRQ and DMA are mandatory\n");
1333 return -EINVAL;
1334 }
1335
1336 ae_config.base_io = io;
1337 ae_config.irq = irq;
1338 ae_config.dma = dma;
1339
1340 ae_config.mss_base = mss_base;
1341 ae_config.mpu_base = mpu_base;
1342 ae_config.mpu_irq = mpu_irq;
1343
1344 if (init_aedsp16() == FALSE) {
1345 printk(KERN_ERR "aedsp16: initialization failed\n");
1346 /*
1347 * XXX
1348 * What error should we return here ?
1349 */
1350 return -EINVAL;
1351 }
1352 return 0;
1353 }
1354
1355 static void __exit cleanup_aedsp16(void) {
1356 uninit_aedsp16();
1357 }
1358
1359 module_init(do_init_aedsp16);
1360 module_exit(cleanup_aedsp16);
1361
1362 #ifndef MODULE
1363 static int __init setup_aedsp16(char *str)
1364 {
1365 /* io, irq, dma, mss_io, mpu_io, mpu_irq */
1366 int ints[7];
1367
1368 str = get_options(str, ARRAY_SIZE(ints), ints);
1369
1370 io = ints[1];
1371 irq = ints[2];
1372 dma = ints[3];
1373 mss_base = ints[4];
1374 mpu_base = ints[5];
1375 mpu_irq = ints[6];
1376 return 1;
1377 }
1378
1379 __setup("aedsp16=", setup_aedsp16);
1380 #endif
hh.org GIT migration