2 * arch/v850/kernel/v850e_intc.c -- V850E interrupt controller (INTC)
4 * Copyright (C) 2001,02,03 NEC Electronics Corporation
5 * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
7 * This file is subject to the terms and conditions of the GNU General
8 * Public License. See the file COPYING in the main directory of this
9 * archive for more details.
11 * Written by Miles Bader <miles@gnu.org>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/irq.h>
18 #include <asm/v850e_intc.h>
20 static void irq_nop (unsigned irq
) { }
22 static unsigned v850e_intc_irq_startup (unsigned irq
)
24 v850e_intc_clear_pending_irq (irq
);
25 v850e_intc_enable_irq (irq
);
29 static void v850e_intc_end_irq (unsigned irq
)
31 unsigned long psw
, temp
;
33 /* Clear the highest-level bit in the In-service priority register
34 (ISPR), to allow this interrupt (or another of the same or
35 lesser priority) to happen again.
37 The `reti' instruction normally does this automatically when the
38 PSW bits EP and NP are zero, but we can't always rely on reti
39 being used consistently to return after an interrupt (another
40 process can be scheduled, for instance, which can delay the
41 associated reti for a long time, or this process may be being
42 single-stepped, which uses the `dbret' instruction to return
45 We also set the PSW EP bit, which prevents reti from also
46 trying to modify the ISPR itself. */
48 /* Get PSW and disable interrupts. */
49 asm volatile ("stsr psw, %0; di" : "=r" (psw
));
50 /* We don't want to do anything for NMIs (they don't use the ISPR). */
52 /* Transition to `trap' state, so that an eventual real
53 reti instruction won't modify the ISPR. */
55 /* Fake an interrupt return, which automatically clears the
56 appropriate bit in the ISPR. */
57 asm volatile ("mov hilo(1f), %0;"
58 "ldsr %0, eipc; ldsr %1, eipsw;"
61 : "=&r" (temp
) : "r" (psw
));
65 /* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
66 INITS (which is terminated by an entry with the name field == 0). */
67 void __init
v850e_intc_init_irq_types (struct v850e_intc_irq_init
*inits
,
68 struct hw_interrupt_type
*hw_irq_types
)
70 struct v850e_intc_irq_init
*init
;
71 for (init
= inits
; init
->name
; init
++) {
73 struct hw_interrupt_type
*hwit
= hw_irq_types
++;
75 hwit
->typename
= init
->name
;
77 hwit
->startup
= v850e_intc_irq_startup
;
78 hwit
->shutdown
= v850e_intc_disable_irq
;
79 hwit
->enable
= v850e_intc_enable_irq
;
80 hwit
->disable
= v850e_intc_disable_irq
;
82 hwit
->end
= v850e_intc_end_irq
;
84 /* Initialize kernel IRQ infrastructure for this interrupt. */
85 init_irq_handlers(init
->base
, init
->num
, init
->interval
, hwit
);
87 /* Set the interrupt priorities. */
88 for (i
= 0; i
< init
->num
; i
++) {
89 unsigned irq
= init
->base
+ i
* init
->interval
;
91 /* If the interrupt is currently enabled (all
92 interrupts are initially disabled), then
93 assume whoever enabled it has set things up
94 properly, and avoid messing with it. */
95 if (! v850e_intc_irq_enabled (irq
))
96 /* This write also (1) disables the
97 interrupt, and (2) clears any pending
100 = (V850E_INTC_IC_PR (init
->priority
)