include/asm-ppc/mpc10x.h

   1 /*
   2  * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
   3  * ctlr/EPIC/etc.
   4  *
   5  * Author: Mark A. Greer
   6  *         mgreer@mvista.com
   7  *
   8  * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
   9  * the terms of the GNU General Public License version 2.  This program
  10  * is licensed "as is" without any warranty of any kind, whether express
  11  * or implied.
  12  */
  13 #ifndef __PPC_KERNEL_MPC10X_H
  14 #define __PPC_KERNEL_MPC10X_H
  15
  16 #include <linux/pci_ids.h>
  17 #include <asm/pci-bridge.h>
  18
  19 /*
  20  * The values here don't completely map everything but should work in most
  21  * cases.
  22  *
  23  * MAP A (PReP Map)
  24  *   Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
  25  *   Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
  26  *   PCI MEM:   0x80000000 -> Processor System Memory: 0x00000000
  27  *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
  28  *
  29  * MAP B (CHRP Map)
  30  *   Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
  31  *   Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
  32  *   PCI MEM:   0x00000000 -> Processor System Memory: 0x00000000
  33  *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
  34  */
  35
  36 /*
  37  * Define the vendor/device IDs for the various bridges--should be added to
  38  * <linux/pci_ids.h>
  39  */
  40 #define MPC10X_BRIDGE_106       ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) |  \
  41                                   PCI_VENDOR_ID_MOTOROLA)
  42 #define MPC10X_BRIDGE_8240      ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA)
  43 #define MPC10X_BRIDGE_107       ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA)
  44 #define MPC10X_BRIDGE_8245      ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA)
  45
  46 /* Define the type of map to use */
  47 #define MPC10X_MEM_MAP_A                1
  48 #define MPC10X_MEM_MAP_B                2
  49
  50 /* Map A (PReP Map) Defines */
  51 #define MPC10X_MAPA_CNFG_ADDR           0x80000cf8
  52 #define MPC10X_MAPA_CNFG_DATA           0x80000cfc
  53
  54 #define MPC10X_MAPA_ISA_IO_BASE         0x80000000
  55 #define MPC10X_MAPA_ISA_MEM_BASE        0xc0000000
  56 #define MPC10X_MAPA_DRAM_OFFSET         0x80000000
  57
  58 #define MPC10X_MAPA_PCI_INTACK_ADDR     0xbffffff0
  59 #define MPC10X_MAPA_PCI_IO_START        0x00000000
  60 #define MPC10X_MAPA_PCI_IO_END         (0x00800000 - 1)
  61 #define MPC10X_MAPA_PCI_MEM_START       0x00000000
  62 #define MPC10X_MAPA_PCI_MEM_END        (0x20000000 - 1)
  63
  64 #define MPC10X_MAPA_PCI_MEM_OFFSET      (MPC10X_MAPA_ISA_MEM_BASE -     \
  65                                          MPC10X_MAPA_PCI_MEM_START)
  66
  67 /* Map B (CHRP Map) Defines */
  68 #define MPC10X_MAPB_CNFG_ADDR           0xfec00000
  69 #define MPC10X_MAPB_CNFG_DATA           0xfee00000
  70
  71 #define MPC10X_MAPB_ISA_IO_BASE         0xfe000000
  72 #define MPC10X_MAPB_ISA_MEM_BASE        0x80000000
  73 #define MPC10X_MAPB_DRAM_OFFSET         0x00000000
  74
  75 #define MPC10X_MAPB_PCI_INTACK_ADDR     0xfef00000
  76 #define MPC10X_MAPB_PCI_IO_START        0x00000000
  77 #define MPC10X_MAPB_PCI_IO_END         (0x00c00000 - 1)
  78 #define MPC10X_MAPB_PCI_MEM_START       0x80000000
  79 #define MPC10X_MAPB_PCI_MEM_END        (0xc0000000 - 1)
  80
  81 #define MPC10X_MAPB_PCI_MEM_OFFSET      (MPC10X_MAPB_ISA_MEM_BASE -     \
  82                                          MPC10X_MAPB_PCI_MEM_START)
  83
  84 /* Set hose members to values appropriate for the mem map used */
  85 #define MPC10X_SETUP_HOSE(hose, map) {                                  \
  86         (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET;      \
  87         (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START;        \
  88         (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END;            \
  89         (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START;      \
  90         (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END;          \
  91         (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE;   \
  92 }
  93
  94
  95 /* Miscellaneous Configuration register offsets */
  96 #define MPC10X_CFG_PIR_REG              0x09
  97 #define MPC10X_CFG_PIR_HOST_BRIDGE      0x00
  98 #define MPC10X_CFG_PIR_AGENT            0x01
  99
 100 #define MPC10X_CFG_EUMBBAR              0x78
 101
 102 #define MPC10X_CFG_PICR1_REG            0xa8
 103 #define MPC10X_CFG_PICR1_ADDR_MAP_MASK  0x00010000
 104 #define MPC10X_CFG_PICR1_ADDR_MAP_A     0x00010000
 105 #define MPC10X_CFG_PICR1_ADDR_MAP_B     0x00000000
 106 #define MPC10X_CFG_PICR1_SPEC_PCI_RD    0x00000004
 107 #define MPC10X_CFG_PICR1_ST_GATH_EN     0x00000040
 108
 109 #define MPC10X_CFG_PICR2_REG            0xac
 110 #define MPC10X_CFG_PICR2_COPYBACK_OPT   0x00000001
 111
 112 #define MPC10X_CFG_MAPB_OPTIONS_REG     0xe0
 113 #define MPC10X_CFG_MAPB_OPTIONS_CFAE    0x80    /* CPU_FD_ALIAS_EN */
 114 #define MPC10X_CFG_MAPB_OPTIONS_PFAE    0x40    /* PCI_FD_ALIAS_EN */
 115 #define MPC10X_CFG_MAPB_OPTIONS_DR      0x20    /* DLL_RESET */
 116 #define MPC10X_CFG_MAPB_OPTIONS_PCICH   0x08    /* PCI_COMPATIBILITY_HOLE */
 117 #define MPC10X_CFG_MAPB_OPTIONS_PROCCH  0x04    /* PROC_COMPATIBILITY_HOLE */
 118
 119 /* Define offsets for the memory controller registers in the config space */
 120 #define MPC10X_MCTLR_MEM_START_1        0x80    /* Banks 0-3 */
 121 #define MPC10X_MCTLR_MEM_START_2        0x84    /* Banks 4-7 */
 122 #define MPC10X_MCTLR_EXT_MEM_START_1    0x88    /* Banks 0-3 */
 123 #define MPC10X_MCTLR_EXT_MEM_START_2    0x8c    /* Banks 4-7 */
 124
 125 #define MPC10X_MCTLR_MEM_END_1          0x90    /* Banks 0-3 */
 126 #define MPC10X_MCTLR_MEM_END_2          0x94    /* Banks 4-7 */
 127 #define MPC10X_MCTLR_EXT_MEM_END_1      0x98    /* Banks 0-3 */
 128 #define MPC10X_MCTLR_EXT_MEM_END_2      0x9c    /* Banks 4-7 */
 129
 130 #define MPC10X_MCTLR_MEM_BANK_ENABLES   0xa0
 131
 132 /* Define some offset in the EUMB */
 133 #define MPC10X_EUMB_SIZE                0x00100000 /* Total EUMB size (1MB) */
 134
 135 #define MPC10X_EUMB_MU_OFFSET           0x00000000 /* Msg Unit reg offset */
 136 #define MPC10X_EUMB_MU_SIZE             0x00001000 /* Msg Unit reg size */
 137 #define MPC10X_EUMB_DMA_OFFSET          0x00001000 /* DMA Unit reg offset */
 138 #define MPC10X_EUMB_DMA_SIZE            0x00001000 /* DMA Unit reg size  */
 139 #define MPC10X_EUMB_ATU_OFFSET          0x00002000 /* Addr xlate reg offset */
 140 #define MPC10X_EUMB_ATU_SIZE            0x00001000 /* Addr xlate reg size  */
 141 #define MPC10X_EUMB_I2C_OFFSET          0x00003000 /* I2C Unit reg offset */
 142 #define MPC10X_EUMB_I2C_SIZE            0x00001000 /* I2C Unit reg size  */
 143 #define MPC10X_EUMB_DUART_OFFSET        0x00004000 /* DUART Unit reg offset (8245) */
 144 #define MPC10X_EUMB_DUART_SIZE          0x00001000 /* DUART Unit reg size (8245) */
 145 #define MPC10X_EUMB_EPIC_OFFSET         0x00040000 /* EPIC offset in EUMB */
 146 #define MPC10X_EUMB_EPIC_SIZE           0x00030000 /* EPIC size */
 147 #define MPC10X_EUMB_PM_OFFSET           0x000fe000 /* Performance Monitor reg offset (8245) */
 148 #define MPC10X_EUMB_PM_SIZE             0x00001000 /* Performance Monitor reg size (8245) */
 149 #define MPC10X_EUMB_WP_OFFSET           0x000ff000 /* Data path diagnostic, watchpoint reg offset */
 150 #define MPC10X_EUMB_WP_SIZE             0x00001000 /* Data path diagnostic, watchpoint reg size */
 151
 152 /*
 153  * Define some recommended places to put the EUMB regs.
 154  * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff.
 155  */
 156 extern unsigned long                    ioremap_base;
 157 #define MPC10X_MAPA_EUMB_BASE           (ioremap_base - MPC10X_EUMB_SIZE)
 158 #define MPC10X_MAPB_EUMB_BASE           MPC10X_MAPA_EUMB_BASE
 159
 160 enum ppc_sys_devices {
 161         MPC10X_IIC1,
 162         MPC10X_DMA0,
 163         MPC10X_DMA1,
 164         MPC10X_UART0,
 165         MPC10X_UART1,
 166         NUM_PPC_SYS_DEVS,
 167 };
 168
 169 int mpc10x_bridge_init(struct pci_controller *hose,
 170                        uint current_map,
 171                        uint new_map,
 172                        uint phys_eumb_base);
 173 unsigned long mpc10x_get_mem_size(uint mem_map);
 174 int mpc10x_enable_store_gathering(struct pci_controller *hose);
 175 int mpc10x_disable_store_gathering(struct pci_controller *hose);
 176
 177 /* For MPC107 boards that use the built-in openpic */
 178 void mpc10x_set_openpic(void);
 179
 180 #endif  /* __PPC_KERNEL_MPC10X_H */