include/linux/mtd/mtd.h

   1 /*
   2  * $Id: mtd.h,v 1.61 2005/11/07 11:14:54 gleixner Exp $
   3  *
   4  * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
   5  *
   6  * Released under GPL
   7  */
   8
   9 #ifndef __MTD_MTD_H__
  10 #define __MTD_MTD_H__
  11
  12 #ifndef __KERNEL__
  13 #error This is a kernel header. Perhaps include mtd-user.h instead?
  14 #endif
  15
  16 #include <linux/types.h>
  17 #include <linux/module.h>
  18 #include <linux/uio.h>
  19 #include <linux/notifier.h>
  20
  21 #include <linux/mtd/compatmac.h>
  22 #include <mtd/mtd-abi.h>
  23
  24 #define MTD_CHAR_MAJOR 90
  25 #define MTD_BLOCK_MAJOR 31
  26 #define MAX_MTD_DEVICES 16
  27
  28 #define MTD_ERASE_PENDING       0x01
  29 #define MTD_ERASING             0x02
  30 #define MTD_ERASE_SUSPEND       0x04
  31 #define MTD_ERASE_DONE          0x08
  32 #define MTD_ERASE_FAILED        0x10
  33
  34 /* If the erase fails, fail_addr might indicate exactly which block failed.  If
  35    fail_addr = 0xffffffff, the failure was not at the device level or was not
  36    specific to any particular block. */
  37 struct erase_info {
  38         struct mtd_info *mtd;
  39         u_int32_t addr;
  40         u_int32_t len;
  41         u_int32_t fail_addr;
  42         u_long time;
  43         u_long retries;
  44         u_int dev;
  45         u_int cell;
  46         void (*callback) (struct erase_info *self);
  47         u_long priv;
  48         u_char state;
  49         struct erase_info *next;
  50 };
  51
  52 struct mtd_erase_region_info {
  53         u_int32_t offset;                       /* At which this region starts, from the beginning of the MTD */
  54         u_int32_t erasesize;            /* For this region */
  55         u_int32_t numblocks;            /* Number of blocks of erasesize in this region */
  56 };
  57
  58 /*
  59  * oob operation modes
  60  *
  61  * MTD_OOB_PLACE:       oob data are placed at the given offset
  62  * MTD_OOB_AUTO:        oob data are automatically placed at the free areas
  63  *                      which are defined by the ecclayout
  64  * MTD_OOB_RAW:         mode to read raw data+oob in one chunk. The oob data
  65  *                      is inserted into the data. Thats a raw image of the
  66  *                      flash contents.
  67  */
  68 typedef enum {
  69         MTD_OOB_PLACE,
  70         MTD_OOB_AUTO,
  71         MTD_OOB_RAW,
  72 } mtd_oob_mode_t;
  73
  74 /**
  75  * struct mtd_oob_ops - oob operation operands
  76  * @mode:       operation mode
  77  *
  78  * @len:        number of bytes to write/read. When a data buffer is given
  79  *              (datbuf != NULL) this is the number of data bytes. When
  80  *              no data buffer is available this is the number of oob bytes.
  81  *
  82  * @retlen:     number of bytes written/read. When a data buffer is given
  83  *              (datbuf != NULL) this is the number of data bytes. When
  84  *              no data buffer is available this is the number of oob bytes.
  85  *
  86  * @ooblen:     number of oob bytes per page
  87  * @ooboffs:    offset of oob data in the oob area (only relevant when
  88  *              mode = MTD_OOB_PLACE)
  89  * @datbuf:     data buffer - if NULL only oob data are read/written
  90  * @oobbuf:     oob data buffer
  91  */
  92 struct mtd_oob_ops {
  93         mtd_oob_mode_t  mode;
  94         size_t          len;
  95         size_t          retlen;
  96         size_t          ooblen;
  97         uint32_t        ooboffs;
  98         uint8_t         *datbuf;
  99         uint8_t         *oobbuf;
 100 };
 101
 102 struct mtd_info {
 103         u_char type;
 104         u_int32_t flags;
 105         u_int32_t size;  // Total size of the MTD
 106
 107         /* "Major" erase size for the device. Naïve users may take this
 108          * to be the only erase size available, or may use the more detailed
 109          * information below if they desire
 110          */
 111         u_int32_t erasesize;
 112         /* Minimal writable flash unit size. In case of NOR flash it is 1 (even
 113          * though individual bits can be cleared), in case of NAND flash it is
 114          * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
 115          * it is of ECC block size, etc. It is illegal to have writesize = 0.
 116          * Any driver registering a struct mtd_info must ensure a writesize of
 117          * 1 or larger.
 118          */
 119         u_int32_t writesize;
 120
 121         u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
 122         u_int32_t ecctype;
 123         u_int32_t eccsize;
 124
 125         /*
 126          * Reuse some of the above unused fields in the case of NOR flash
 127          * with configurable programming regions to avoid modifying the
 128          * user visible structure layout/size.  Only valid when the
 129          * MTD_PROGRAM_REGIONS flag is set.
 130          * (Maybe we should have an union for those?)
 131          */
 132 #define MTD_PROGREGION_CTRLMODE_VALID(mtd)  (mtd)->oobsize
 133 #define MTD_PROGREGION_CTRLMODE_INVALID(mtd)  (mtd)->ecctype
 134
 135         // Kernel-only stuff starts here.
 136         char *name;
 137         int index;
 138
 139         /* ecc layout structure pointer - read only ! */
 140         struct nand_ecclayout *ecclayout;
 141
 142         /* Data for variable erase regions. If numeraseregions is zero,
 143          * it means that the whole device has erasesize as given above.
 144          */
 145         int numeraseregions;
 146         struct mtd_erase_region_info *eraseregions;
 147
 148         /* This really shouldn't be here. It can go away in 2.5 */
 149         u_int32_t bank_size;
 150
 151         int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
 152
 153         /* This stuff for eXecute-In-Place */
 154         int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
 155
 156         /* We probably shouldn't allow XIP if the unpoint isn't a NULL */
 157         void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len);
 158
 159
 160         int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 161         int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
 162
 163         int (*read_oob) (struct mtd_info *mtd, loff_t from,
 164                          struct mtd_oob_ops *ops);
 165         int (*write_oob) (struct mtd_info *mtd, loff_t to,
 166                          struct mtd_oob_ops *ops);
 167
 168         /*
 169          * Methods to access the protection register area, present in some
 170          * flash devices. The user data is one time programmable but the
 171          * factory data is read only.
 172          */
 173         int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
 174         int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 175         int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
 176         int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 177         int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 178         int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len);
 179
 180         /* kvec-based read/write methods.
 181            NB: The 'count' parameter is the number of _vectors_, each of
 182            which contains an (ofs, len) tuple.
 183         */
 184         int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
 185
 186         /* Sync */
 187         void (*sync) (struct mtd_info *mtd);
 188
 189         /* Chip-supported device locking */
 190         int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len);
 191         int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len);
 192
 193         /* Power Management functions */
 194         int (*suspend) (struct mtd_info *mtd);
 195         void (*resume) (struct mtd_info *mtd);
 196
 197         /* Bad block management functions */
 198         int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
 199         int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
 200
 201         struct notifier_block reboot_notifier;  /* default mode before reboot */
 202
 203         /* ECC status information */
 204         struct mtd_ecc_stats ecc_stats;
 205
 206         void *priv;
 207
 208         struct module *owner;
 209         int usecount;
 210 };
 211
 212
 213         /* Kernel-side ioctl definitions */
 214
 215 extern int add_mtd_device(struct mtd_info *mtd);
 216 extern int del_mtd_device (struct mtd_info *mtd);
 217
 218 extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
 219
 220 extern void put_mtd_device(struct mtd_info *mtd);
 221
 222
 223 struct mtd_notifier {
 224         void (*add)(struct mtd_info *mtd);
 225         void (*remove)(struct mtd_info *mtd);
 226         struct list_head list;
 227 };
 228
 229
 230 extern void register_mtd_user (struct mtd_notifier *new);
 231 extern int unregister_mtd_user (struct mtd_notifier *old);
 232
 233 int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
 234                        unsigned long count, loff_t to, size_t *retlen);
 235
 236 int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
 237                       unsigned long count, loff_t from, size_t *retlen);
 238
 239 #ifdef CONFIG_MTD_PARTITIONS
 240 void mtd_erase_callback(struct erase_info *instr);
 241 #else
 242 static inline void mtd_erase_callback(struct erase_info *instr)
 243 {
 244         if (instr->callback)
 245                 instr->callback(instr);
 246 }
 247 #endif
 248
 249 /*
 250  * Debugging macro and defines
 251  */
 252 #define MTD_DEBUG_LEVEL0        (0)     /* Quiet   */
 253 #define MTD_DEBUG_LEVEL1        (1)     /* Audible */
 254 #define MTD_DEBUG_LEVEL2        (2)     /* Loud    */
 255 #define MTD_DEBUG_LEVEL3        (3)     /* Noisy   */
 256
 257 #ifdef CONFIG_MTD_DEBUG
 258 #define DEBUG(n, args...)                               \
 259         do {                                            \
 260                 if (n <= CONFIG_MTD_DEBUG_VERBOSE)      \
 261                         printk(KERN_INFO args);         \
 262         } while(0)
 263 #else /* CONFIG_MTD_DEBUG */
 264 #define DEBUG(n, args...) do { } while(0)
 265
 266 #endif /* CONFIG_MTD_DEBUG */
 267
 268 #endif /* __MTD_MTD_H__ */