[GYRO] Refactor gyro driver for dual-gyro support
[inav.git] / lib / main / MAVLink / common / mavlink_msg_data_stream.h
blobcceca20fae46ce29ada4ee929865ebf44026cfe6
1 #pragma once
2 // MESSAGE DATA_STREAM PACKING
4 #define MAVLINK_MSG_ID_DATA_STREAM 67
6 MAVPACKED(
7 typedef struct __mavlink_data_stream_t {
8 uint16_t message_rate; /*< The message rate*/
9 uint8_t stream_id; /*< The ID of the requested data stream*/
10 uint8_t on_off; /*< 1 stream is enabled, 0 stream is stopped.*/
11 }) mavlink_data_stream_t;
13 #define MAVLINK_MSG_ID_DATA_STREAM_LEN 4
14 #define MAVLINK_MSG_ID_DATA_STREAM_MIN_LEN 4
15 #define MAVLINK_MSG_ID_67_LEN 4
16 #define MAVLINK_MSG_ID_67_MIN_LEN 4
18 #define MAVLINK_MSG_ID_DATA_STREAM_CRC 21
19 #define MAVLINK_MSG_ID_67_CRC 21
23 #if MAVLINK_COMMAND_24BIT
24 #define MAVLINK_MESSAGE_INFO_DATA_STREAM { \
25 67, \
26 "DATA_STREAM", \
27 3, \
28 { { "message_rate", NULL, MAVLINK_TYPE_UINT16_T, 0, 0, offsetof(mavlink_data_stream_t, message_rate) }, \
29 { "stream_id", NULL, MAVLINK_TYPE_UINT8_T, 0, 2, offsetof(mavlink_data_stream_t, stream_id) }, \
30 { "on_off", NULL, MAVLINK_TYPE_UINT8_T, 0, 3, offsetof(mavlink_data_stream_t, on_off) }, \
31 } \
33 #else
34 #define MAVLINK_MESSAGE_INFO_DATA_STREAM { \
35 "DATA_STREAM", \
36 3, \
37 { { "message_rate", NULL, MAVLINK_TYPE_UINT16_T, 0, 0, offsetof(mavlink_data_stream_t, message_rate) }, \
38 { "stream_id", NULL, MAVLINK_TYPE_UINT8_T, 0, 2, offsetof(mavlink_data_stream_t, stream_id) }, \
39 { "on_off", NULL, MAVLINK_TYPE_UINT8_T, 0, 3, offsetof(mavlink_data_stream_t, on_off) }, \
40 } \
42 #endif
44 /**
45 * @brief Pack a data_stream message
46 * @param system_id ID of this system
47 * @param component_id ID of this component (e.g. 200 for IMU)
48 * @param msg The MAVLink message to compress the data into
50 * @param stream_id The ID of the requested data stream
51 * @param message_rate The message rate
52 * @param on_off 1 stream is enabled, 0 stream is stopped.
53 * @return length of the message in bytes (excluding serial stream start sign)
55 static inline uint16_t mavlink_msg_data_stream_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg,
56 uint8_t stream_id, uint16_t message_rate, uint8_t on_off)
58 #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
59 char buf[MAVLINK_MSG_ID_DATA_STREAM_LEN];
60 _mav_put_uint16_t(buf, 0, message_rate);
61 _mav_put_uint8_t(buf, 2, stream_id);
62 _mav_put_uint8_t(buf, 3, on_off);
64 memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_DATA_STREAM_LEN);
65 #else
66 mavlink_data_stream_t packet;
67 packet.message_rate = message_rate;
68 packet.stream_id = stream_id;
69 packet.on_off = on_off;
71 memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_DATA_STREAM_LEN);
72 #endif
74 msg->msgid = MAVLINK_MSG_ID_DATA_STREAM;
75 return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_DATA_STREAM_MIN_LEN, MAVLINK_MSG_ID_DATA_STREAM_LEN, MAVLINK_MSG_ID_DATA_STREAM_CRC);
78 /**
79 * @brief Pack a data_stream message on a channel
80 * @param system_id ID of this system
81 * @param component_id ID of this component (e.g. 200 for IMU)
82 * @param chan The MAVLink channel this message will be sent over
83 * @param msg The MAVLink message to compress the data into
84 * @param stream_id The ID of the requested data stream
85 * @param message_rate The message rate
86 * @param on_off 1 stream is enabled, 0 stream is stopped.
87 * @return length of the message in bytes (excluding serial stream start sign)
89 static inline uint16_t mavlink_msg_data_stream_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan,
90 mavlink_message_t* msg,
91 uint8_t stream_id,uint16_t message_rate,uint8_t on_off)
93 #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
94 char buf[MAVLINK_MSG_ID_DATA_STREAM_LEN];
95 _mav_put_uint16_t(buf, 0, message_rate);
96 _mav_put_uint8_t(buf, 2, stream_id);
97 _mav_put_uint8_t(buf, 3, on_off);
99 memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_DATA_STREAM_LEN);
100 #else
101 mavlink_data_stream_t packet;
102 packet.message_rate = message_rate;
103 packet.stream_id = stream_id;
104 packet.on_off = on_off;
106 memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_DATA_STREAM_LEN);
107 #endif
109 msg->msgid = MAVLINK_MSG_ID_DATA_STREAM;
110 return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_DATA_STREAM_MIN_LEN, MAVLINK_MSG_ID_DATA_STREAM_LEN, MAVLINK_MSG_ID_DATA_STREAM_CRC);
114 * @brief Encode a data_stream struct
116 * @param system_id ID of this system
117 * @param component_id ID of this component (e.g. 200 for IMU)
118 * @param msg The MAVLink message to compress the data into
119 * @param data_stream C-struct to read the message contents from
121 static inline uint16_t mavlink_msg_data_stream_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_data_stream_t* data_stream)
123 return mavlink_msg_data_stream_pack(system_id, component_id, msg, data_stream->stream_id, data_stream->message_rate, data_stream->on_off);
127 * @brief Encode a data_stream struct on a channel
129 * @param system_id ID of this system
130 * @param component_id ID of this component (e.g. 200 for IMU)
131 * @param chan The MAVLink channel this message will be sent over
132 * @param msg The MAVLink message to compress the data into
133 * @param data_stream C-struct to read the message contents from
135 static inline uint16_t mavlink_msg_data_stream_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_data_stream_t* data_stream)
137 return mavlink_msg_data_stream_pack_chan(system_id, component_id, chan, msg, data_stream->stream_id, data_stream->message_rate, data_stream->on_off);
141 * @brief Send a data_stream message
142 * @param chan MAVLink channel to send the message
144 * @param stream_id The ID of the requested data stream
145 * @param message_rate The message rate
146 * @param on_off 1 stream is enabled, 0 stream is stopped.
148 #ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS
150 static inline void mavlink_msg_data_stream_send(mavlink_channel_t chan, uint8_t stream_id, uint16_t message_rate, uint8_t on_off)
152 #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
153 char buf[MAVLINK_MSG_ID_DATA_STREAM_LEN];
154 _mav_put_uint16_t(buf, 0, message_rate);
155 _mav_put_uint8_t(buf, 2, stream_id);
156 _mav_put_uint8_t(buf, 3, on_off);
158 _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_STREAM, buf, MAVLINK_MSG_ID_DATA_STREAM_MIN_LEN, MAVLINK_MSG_ID_DATA_STREAM_LEN, MAVLINK_MSG_ID_DATA_STREAM_CRC);
159 #else
160 mavlink_data_stream_t packet;
161 packet.message_rate = message_rate;
162 packet.stream_id = stream_id;
163 packet.on_off = on_off;
165 _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_STREAM, (const char *)&packet, MAVLINK_MSG_ID_DATA_STREAM_MIN_LEN, MAVLINK_MSG_ID_DATA_STREAM_LEN, MAVLINK_MSG_ID_DATA_STREAM_CRC);
166 #endif
170 * @brief Send a data_stream message
171 * @param chan MAVLink channel to send the message
172 * @param struct The MAVLink struct to serialize
174 static inline void mavlink_msg_data_stream_send_struct(mavlink_channel_t chan, const mavlink_data_stream_t* data_stream)
176 #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
177 mavlink_msg_data_stream_send(chan, data_stream->stream_id, data_stream->message_rate, data_stream->on_off);
178 #else
179 _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_STREAM, (const char *)data_stream, MAVLINK_MSG_ID_DATA_STREAM_MIN_LEN, MAVLINK_MSG_ID_DATA_STREAM_LEN, MAVLINK_MSG_ID_DATA_STREAM_CRC);
180 #endif
183 #if MAVLINK_MSG_ID_DATA_STREAM_LEN <= MAVLINK_MAX_PAYLOAD_LEN
185 This varient of _send() can be used to save stack space by re-using
186 memory from the receive buffer. The caller provides a
187 mavlink_message_t which is the size of a full mavlink message. This
188 is usually the receive buffer for the channel, and allows a reply to an
189 incoming message with minimum stack space usage.
191 static inline void mavlink_msg_data_stream_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint8_t stream_id, uint16_t message_rate, uint8_t on_off)
193 #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
194 char *buf = (char *)msgbuf;
195 _mav_put_uint16_t(buf, 0, message_rate);
196 _mav_put_uint8_t(buf, 2, stream_id);
197 _mav_put_uint8_t(buf, 3, on_off);
199 _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_STREAM, buf, MAVLINK_MSG_ID_DATA_STREAM_MIN_LEN, MAVLINK_MSG_ID_DATA_STREAM_LEN, MAVLINK_MSG_ID_DATA_STREAM_CRC);
200 #else
201 mavlink_data_stream_t *packet = (mavlink_data_stream_t *)msgbuf;
202 packet->message_rate = message_rate;
203 packet->stream_id = stream_id;
204 packet->on_off = on_off;
206 _mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_DATA_STREAM, (const char *)packet, MAVLINK_MSG_ID_DATA_STREAM_MIN_LEN, MAVLINK_MSG_ID_DATA_STREAM_LEN, MAVLINK_MSG_ID_DATA_STREAM_CRC);
207 #endif
209 #endif
211 #endif
213 // MESSAGE DATA_STREAM UNPACKING
217 * @brief Get field stream_id from data_stream message
219 * @return The ID of the requested data stream
221 static inline uint8_t mavlink_msg_data_stream_get_stream_id(const mavlink_message_t* msg)
223 return _MAV_RETURN_uint8_t(msg, 2);
227 * @brief Get field message_rate from data_stream message
229 * @return The message rate
231 static inline uint16_t mavlink_msg_data_stream_get_message_rate(const mavlink_message_t* msg)
233 return _MAV_RETURN_uint16_t(msg, 0);
237 * @brief Get field on_off from data_stream message
239 * @return 1 stream is enabled, 0 stream is stopped.
241 static inline uint8_t mavlink_msg_data_stream_get_on_off(const mavlink_message_t* msg)
243 return _MAV_RETURN_uint8_t(msg, 3);
247 * @brief Decode a data_stream message into a struct
249 * @param msg The message to decode
250 * @param data_stream C-struct to decode the message contents into
252 static inline void mavlink_msg_data_stream_decode(const mavlink_message_t* msg, mavlink_data_stream_t* data_stream)
254 #if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
255 data_stream->message_rate = mavlink_msg_data_stream_get_message_rate(msg);
256 data_stream->stream_id = mavlink_msg_data_stream_get_stream_id(msg);
257 data_stream->on_off = mavlink_msg_data_stream_get_on_off(msg);
258 #else
259 uint8_t len = msg->len < MAVLINK_MSG_ID_DATA_STREAM_LEN? msg->len : MAVLINK_MSG_ID_DATA_STREAM_LEN;
260 memset(data_stream, 0, MAVLINK_MSG_ID_DATA_STREAM_LEN);
261 memcpy(data_stream, _MAV_PAYLOAD(msg), len);
262 #endif