src/main/target/stm32h7xx_hal_conf.h

   1 /**
   2   ******************************************************************************
   3   * @file    stm32h7xx_hal_conf_template.h
   4   * @author  MCD Application Team
   5   * @brief   HAL configuration template file.
   6   *          This file should be copied to the application folder and renamed
   7   *          to stm32h7xx_hal_conf.h.
   8   ******************************************************************************
   9   * @attention
  10   *
  11   * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  12   *
  13   * Redistribution and use in source and binary forms, with or without modification,
  14   * are permitted provided that the following conditions are met:
  15   *   1. Redistributions of source code must retain the above copyright notice,
  16   *      this list of conditions and the following disclaimer.
  17   *   2. Redistributions in binary form must reproduce the above copyright notice,
  18   *      this list of conditions and the following disclaimer in the documentation
  19   *      and/or other materials provided with the distribution.
  20   *   3. Neither the name of STMicroelectronics nor the names of its contributors
  21   *      may be used to endorse or promote products derived from this software
  22   *      without specific prior written permission.
  23   *
  24   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  25   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  26   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  27   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  28   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  29   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  30   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  31   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  32   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  33   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  34   *
  35   ******************************************************************************
  36   */
  37
  38 /* Define to prevent recursive inclusion -------------------------------------*/
  39 #ifndef __STM32H7xx_HAL_CONF_H
  40 #define __STM32H7xx_HAL_CONF_H
  41
  42 #ifdef __cplusplus
  43  extern "C" {
  44 #endif
  45
  46 /* Exported types ------------------------------------------------------------*/
  47 /* Exported constants --------------------------------------------------------*/
  48
  49 /* ########################## Module Selection ############################## */
  50 /**
  51   * @brief This is the list of modules to be used in the HAL driver
  52   */
  53 #define HAL_MODULE_ENABLED
  54 #define HAL_ADC_MODULE_ENABLED
  55 //#define HAL_CEC_MODULE_ENABLED
  56 //#define HAL_COMP_MODULE_ENABLED
  57 #define HAL_CORTEX_MODULE_ENABLED
  58 //#define HAL_CRC_MODULE_ENABLED
  59 //#define HAL_CRYP_MODULE_ENABLED
  60 #define HAL_DAC_MODULE_ENABLED
  61 //#define HAL_DCMI_MODULE_ENABLED
  62 //#define HAL_DFSDM_MODULE_ENABLED
  63 #define HAL_DMA_MODULE_ENABLED
  64 //#define HAL_DMA2D_MODULE_ENABLED
  65 //#define HAL_ETH_MODULE_ENABLED
  66 //#define HAL_FDCAN_MODULE_ENABLED
  67 #define HAL_FLASH_MODULE_ENABLED
  68 #define HAL_GPIO_MODULE_ENABLED
  69 //#define HAL_HASH_MODULE_ENABLED
  70 //#define HAL_HCD_MODULE_ENABLED
  71 //#define HAL_HRTIM_MODULE_ENABLED
  72 //#define HAL_HSEM_MODULE_ENABLED
  73 #define HAL_I2C_MODULE_ENABLED
  74 //#define HAL_I2S_MODULE_ENABLED
  75 //#define HAL_IRDA_MODULE_ENABLED
  76 //#define HAL_IWDG_MODULE_ENABLED
  77 //#define HAL_JPEG_MODULE_ENABLED
  78 //#define HAL_LPTIM_MODULE_ENABLED
  79 //#define HAL_LTDC_MODULE_ENABLED
  80 //#define HAL_MDIOS_MODULE_ENABLED
  81 #define HAL_MDMA_MODULE_ENABLED
  82 //#define HAL_MMC_MODULE_ENABLED
  83 //#define HAL_NAND_MODULE_ENABLED
  84 //#define HAL_NOR_MODULE_ENABLED
  85 //#define HAL_OPAMP_MODULE_ENABLED
  86 #define HAL_PCD_MODULE_ENABLED
  87 #define HAL_PWR_MODULE_ENABLED
  88 #define HAL_QSPI_MODULE_ENABLED
  89 #define HAL_RCC_MODULE_ENABLED
  90 //#define HAL_RNG_MODULE_ENABLED
  91 #define HAL_RTC_MODULE_ENABLED
  92 //#define HAL_SAI_MODULE_ENABLED
  93 #define HAL_SD_MODULE_ENABLED
  94 //#define HAL_SDRAM_MODULE_ENABLED
  95 //#define HAL_SMARTCARD_MODULE_ENABLED
  96 //#define HAL_SMBUS_MODULE_ENABLED
  97 //#define HAL_SPDIFRX_MODULE_ENABLED
  98 #define HAL_SPI_MODULE_ENABLED
  99 //#define HAL_SRAM_MODULE_ENABLED
 100 //#define HAL_SWPMI_MODULE_ENABLED
 101 #define HAL_TIM_MODULE_ENABLED
 102 #define HAL_UART_MODULE_ENABLED
 103 #define HAL_USART_MODULE_ENABLED
 104 //#define HAL_WWDG_MODULE_ENABLED
 105
 106 /* ########################## Oscillator Values adaptation ####################*/
 107 /**
 108   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
 109   *        This value is used by the RCC HAL module to compute the system frequency
 110   *        (when HSE is used as system clock source, directly or through the PLL).
 111   */
 112 #if !defined  (HSE_VALUE)
 113 #define HSE_VALUE    ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
 114 #endif /* HSE_VALUE */
 115
 116 #if !defined  (HSE_STARTUP_TIMEOUT)
 117   #define HSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for HSE start up, in ms */
 118 #endif /* HSE_STARTUP_TIMEOUT */
 119
 120 /**
 121   * @brief Internal  oscillator (CSI) default value.
 122   *        This value is the default CSI value after Reset.
 123   */
 124 #if !defined  (CSI_VALUE)
 125   #define CSI_VALUE    ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
 126 #endif /* CSI_VALUE */
 127
 128 /**
 129   * @brief Internal High Speed oscillator (HSI) value.
 130   *        This value is used by the RCC HAL module to compute the system frequency
 131   *        (when HSI is used as system clock source, directly or through the PLL).
 132   */
 133 #if !defined  (HSI_VALUE)
 134   #define HSI_VALUE    ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
 135 #endif /* HSI_VALUE */
 136
 137 /**
 138   * @brief External Low Speed oscillator (LSE) value.
 139   *        This value is used by the UART, RTC HAL module to compute the system frequency
 140   */
 141 #if !defined  (LSE_VALUE)
 142   #define LSE_VALUE    ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
 143 #endif /* LSE_VALUE */
 144
 145
 146 #if !defined  (LSE_STARTUP_TIMEOUT)
 147   #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
 148 #endif /* LSE_STARTUP_TIMEOUT */
 149
 150 /**
 151   * @brief External clock source for I2S peripheral
 152   *        This value is used by the I2S HAL module to compute the I2S clock source
 153   *        frequency, this source is inserted directly through I2S_CKIN pad.
 154   */
 155 #if !defined  (EXTERNAL_CLOCK_VALUE)
 156   #define EXTERNAL_CLOCK_VALUE    12288000U /*!< Value of the External clock in Hz*/
 157 #endif /* EXTERNAL_CLOCK_VALUE */
 158
 159 /* Tip: To avoid modifying this file each time you need to use different HSE,
 160    ===  you can define the HSE value in your toolchain compiler preprocessor. */
 161
 162 /* ########################### System Configuration ######################### */
 163 /**
 164   * @brief This is the HAL system configuration section
 165   */
 166 #define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
 167 #define  TICK_INT_PRIORITY            ((uint32_t)0x00) /*!< tick interrupt priority */
 168 #define  USE_RTOS                     0
 169 #define  USE_SD_TRANSCEIVER           0U               /*!< use uSD Transceiver */
 170
 171 /* ########################### Ethernet Configuration ######################### */
 172 #define ETH_TX_DESC_CNT         4  /* number of Ethernet Tx DMA descriptors */
 173 #define ETH_RX_DESC_CNT         4  /* number of Ethernet Rx DMA descriptors */
 174
 175 #define ETH_MAC_ADDR0    ((uint8_t)0x02)
 176 #define ETH_MAC_ADDR1    ((uint8_t)0x00)
 177 #define ETH_MAC_ADDR2    ((uint8_t)0x00)
 178 #define ETH_MAC_ADDR3    ((uint8_t)0x00)
 179 #define ETH_MAC_ADDR4    ((uint8_t)0x00)
 180 #define ETH_MAC_ADDR5    ((uint8_t)0x00)
 181
 182 /* ########################## Assert Selection ############################## */
 183 /**
 184   * @brief Uncomment the line below to expanse the "assert_param" macro in the
 185   *        HAL drivers code
 186   */
 187 /* #define USE_FULL_ASSERT    1 */
 188
 189 /* ################## SPI peripheral configuration ########################## */
 190 /**
 191   * @brief Used to activate CRC feature inside HAL SPI Driver
 192   *        Activated   (1U): CRC code is compiled within HAL SPI driver
 193   *        Deactivated (0U): CRC code excluded from HAL SPI driver
 194   */
 195
 196 #define USE_SPI_CRC                   1U
 197
 198
 199 /* Includes ------------------------------------------------------------------*/
 200 /**
 201   * @brief Include module's header file
 202   */
 203
 204 #ifdef HAL_RCC_MODULE_ENABLED
 205   #include "stm32h7xx_hal_rcc.h"
 206 #endif /* HAL_RCC_MODULE_ENABLED */
 207
 208 #ifdef HAL_GPIO_MODULE_ENABLED
 209   #include "stm32h7xx_hal_gpio.h"
 210 #endif /* HAL_GPIO_MODULE_ENABLED */
 211
 212 #ifdef HAL_DMA_MODULE_ENABLED
 213   #include "stm32h7xx_hal_dma.h"
 214 #endif /* HAL_DMA_MODULE_ENABLED */
 215
 216 #ifdef HAL_HASH_MODULE_ENABLED
 217   #include "stm32h7xx_hal_hash.h"
 218 #endif /* HAL_HASH_MODULE_ENABLED */
 219
 220 #ifdef HAL_DCMI_MODULE_ENABLED
 221   #include "stm32h7xx_hal_dcmi.h"
 222 #endif /* HAL_DCMI_MODULE_ENABLED */
 223
 224 #ifdef HAL_DMA2D_MODULE_ENABLED
 225   #include "stm32h7xx_hal_dma2d.h"
 226 #endif /* HAL_DMA2D_MODULE_ENABLED */
 227
 228 #ifdef HAL_DFSDM_MODULE_ENABLED
 229   #include "stm32h7xx_hal_dfsdm.h"
 230 #endif /* HAL_DFSDM_MODULE_ENABLED */
 231
 232 #ifdef HAL_ETH_MODULE_ENABLED
 233   #include "stm32h7xx_hal_eth.h"
 234 #endif /* HAL_ETH_MODULE_ENABLED */
 235
 236 #ifdef HAL_CORTEX_MODULE_ENABLED
 237   #include "stm32h7xx_hal_cortex.h"
 238 #endif /* HAL_CORTEX_MODULE_ENABLED */
 239
 240 #ifdef HAL_ADC_MODULE_ENABLED
 241   #include "stm32h7xx_hal_adc.h"
 242 #endif /* HAL_ADC_MODULE_ENABLED */
 243
 244 #ifdef HAL_FDCAN_MODULE_ENABLED
 245   #include "stm32h7xx_hal_fdcan.h"
 246 #endif /* HAL_FDCAN_MODULE_ENABLED */
 247
 248 #ifdef HAL_CEC_MODULE_ENABLED
 249   #include "stm32h7xx_hal_cec.h"
 250 #endif /* HAL_CEC_MODULE_ENABLED */
 251
 252 #ifdef HAL_COMP_MODULE_ENABLED
 253   #include "stm32h7xx_hal_comp.h"
 254 #endif /* HAL_COMP_MODULE_ENABLED */
 255
 256 #ifdef HAL_CRC_MODULE_ENABLED
 257   #include "stm32h7xx_hal_crc.h"
 258 #endif /* HAL_CRC_MODULE_ENABLED */
 259
 260 #ifdef HAL_CRYP_MODULE_ENABLED
 261   #include "stm32h7xx_hal_cryp.h"
 262 #endif /* HAL_CRYP_MODULE_ENABLED */
 263
 264 #ifdef HAL_DAC_MODULE_ENABLED
 265   #include "stm32h7xx_hal_dac.h"
 266 #endif /* HAL_DAC_MODULE_ENABLED */
 267
 268 #ifdef HAL_FLASH_MODULE_ENABLED
 269   #include "stm32h7xx_hal_flash.h"
 270 #endif /* HAL_FLASH_MODULE_ENABLED */
 271
 272 #ifdef HAL_HRTIM_MODULE_ENABLED
 273   #include "stm32h7xx_hal_hrtim.h"
 274 #endif /* HAL_HRTIM_MODULE_ENABLED */
 275
 276 #ifdef HAL_HSEM_MODULE_ENABLED
 277   #include "stm32h7xx_hal_hsem.h"
 278 #endif /* HAL_HSEM_MODULE_ENABLED */
 279
 280 #ifdef HAL_SRAM_MODULE_ENABLED
 281   #include "stm32h7xx_hal_sram.h"
 282 #endif /* HAL_SRAM_MODULE_ENABLED */
 283
 284 #ifdef HAL_NOR_MODULE_ENABLED
 285   #include "stm32h7xx_hal_nor.h"
 286 #endif /* HAL_NOR_MODULE_ENABLED */
 287
 288 #ifdef HAL_NAND_MODULE_ENABLED
 289   #include "stm32h7xx_hal_nand.h"
 290 #endif /* HAL_NAND_MODULE_ENABLED */
 291
 292 #ifdef HAL_I2C_MODULE_ENABLED
 293  #include "stm32h7xx_hal_i2c.h"
 294 #endif /* HAL_I2C_MODULE_ENABLED */
 295
 296 #ifdef HAL_I2S_MODULE_ENABLED
 297  #include "stm32h7xx_hal_i2s.h"
 298 #endif /* HAL_I2S_MODULE_ENABLED */
 299
 300 #ifdef HAL_IWDG_MODULE_ENABLED
 301  #include "stm32h7xx_hal_iwdg.h"
 302 #endif /* HAL_IWDG_MODULE_ENABLED */
 303
 304 #ifdef HAL_JPEG_MODULE_ENABLED
 305  #include "stm32h7xx_hal_jpeg.h"
 306 #endif /* HAL_JPEG_MODULE_ENABLED */
 307
 308 #ifdef HAL_MDIOS_MODULE_ENABLED
 309  #include "stm32h7xx_hal_mdios.h"
 310 #endif /* HAL_MDIOS_MODULE_ENABLED */
 311
 312 #ifdef HAL_MDMA_MODULE_ENABLED
 313  #include "stm32h7xx_hal_mdma.h"
 314 #endif /* HAL_MDMA_MODULE_ENABLED */
 315
 316 #ifdef HAL_MMC_MODULE_ENABLED
 317  #include "stm32h7xx_hal_mmc.h"
 318 #endif /* HAL_MMC_MODULE_ENABLED */
 319
 320 #ifdef HAL_LPTIM_MODULE_ENABLED
 321 #include "stm32h7xx_hal_lptim.h"
 322 #endif /* HAL_LPTIM_MODULE_ENABLED */
 323
 324 #ifdef HAL_LTDC_MODULE_ENABLED
 325 #include "stm32h7xx_hal_ltdc.h"
 326 #endif /* HAL_LTDC_MODULE_ENABLED */
 327
 328 #ifdef HAL_OPAMP_MODULE_ENABLED
 329 #include "stm32h7xx_hal_opamp.h"
 330 #endif /* HAL_OPAMP_MODULE_ENABLED */
 331
 332 #ifdef HAL_PWR_MODULE_ENABLED
 333  #include "stm32h7xx_hal_pwr.h"
 334 #endif /* HAL_PWR_MODULE_ENABLED */
 335
 336 #ifdef HAL_QSPI_MODULE_ENABLED
 337  #include "stm32h7xx_hal_qspi.h"
 338 #endif /* HAL_QSPI_MODULE_ENABLED */
 339
 340 #ifdef HAL_RNG_MODULE_ENABLED
 341  #include "stm32h7xx_hal_rng.h"
 342 #endif /* HAL_RNG_MODULE_ENABLED */
 343
 344 #ifdef HAL_RTC_MODULE_ENABLED
 345  #include "stm32h7xx_hal_rtc.h"
 346 #endif /* HAL_RTC_MODULE_ENABLED */
 347
 348 #ifdef HAL_SAI_MODULE_ENABLED
 349  #include "stm32h7xx_hal_sai.h"
 350 #endif /* HAL_SAI_MODULE_ENABLED */
 351
 352 #ifdef HAL_SD_MODULE_ENABLED
 353  #include "stm32h7xx_hal_sd.h"
 354 #endif /* HAL_SD_MODULE_ENABLED */
 355
 356 #ifdef HAL_SDRAM_MODULE_ENABLED
 357  #include "stm32h7xx_hal_sdram.h"
 358 #endif /* HAL_SDRAM_MODULE_ENABLED */
 359
 360 #ifdef HAL_SPI_MODULE_ENABLED
 361  #include "stm32h7xx_hal_spi.h"
 362 #endif /* HAL_SPI_MODULE_ENABLED */
 363
 364 #ifdef HAL_SPDIFRX_MODULE_ENABLED
 365  #include "stm32h7xx_hal_spdifrx.h"
 366 #endif /* HAL_SPDIFRX_MODULE_ENABLED */
 367
 368 #ifdef HAL_SWPMI_MODULE_ENABLED
 369  #include "stm32h7xx_hal_swpmi.h"
 370 #endif /* HAL_SWPMI_MODULE_ENABLED */
 371
 372 #ifdef HAL_TIM_MODULE_ENABLED
 373  #include "stm32h7xx_hal_tim.h"
 374 #endif /* HAL_TIM_MODULE_ENABLED */
 375
 376 #ifdef HAL_UART_MODULE_ENABLED
 377  #include "stm32h7xx_hal_uart.h"
 378 #endif /* HAL_UART_MODULE_ENABLED */
 379
 380 #ifdef HAL_USART_MODULE_ENABLED
 381  #include "stm32h7xx_hal_usart.h"
 382 #endif /* HAL_USART_MODULE_ENABLED */
 383
 384 #ifdef HAL_IRDA_MODULE_ENABLED
 385  #include "stm32h7xx_hal_irda.h"
 386 #endif /* HAL_IRDA_MODULE_ENABLED */
 387
 388 #ifdef HAL_SMARTCARD_MODULE_ENABLED
 389  #include "stm32h7xx_hal_smartcard.h"
 390 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
 391
 392 #ifdef HAL_SMBUS_MODULE_ENABLED
 393  #include "stm32h7xx_hal_smbus.h"
 394 #endif /* HAL_SMBUS_MODULE_ENABLED */
 395
 396 #ifdef HAL_WWDG_MODULE_ENABLED
 397  #include "stm32h7xx_hal_wwdg.h"
 398 #endif /* HAL_WWDG_MODULE_ENABLED */
 399
 400 #ifdef HAL_PCD_MODULE_ENABLED
 401  #include "stm32h7xx_hal_pcd.h"
 402 #endif /* HAL_PCD_MODULE_ENABLED */
 403
 404 #ifdef HAL_HCD_MODULE_ENABLED
 405  #include "stm32h7xx_hal_hcd.h"
 406 #endif /* HAL_HCD_MODULE_ENABLED */
 407
 408 /* Exported macro ------------------------------------------------------------*/
 409 #ifdef  USE_FULL_ASSERT
 410 /**
 411   * @brief  The assert_param macro is used for function's parameters check.
 412   * @param  expr: If expr is false, it calls assert_failed function
 413   *         which reports the name of the source file and the source
 414   *         line number of the call that failed.
 415   *         If expr is true, it returns no value.
 416   * @retval None
 417   */
 418   #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
 419 /* Exported functions ------------------------------------------------------- */
 420   void assert_failed(uint8_t* file, uint32_t line);
 421 #else
 422   #define assert_param(expr) ((void)0)
 423 #endif /* USE_FULL_ASSERT */
 424
 425 #ifdef __cplusplus
 426 }
 427 #endif
 428
 429 #endif /* __STM32H7xx_HAL_CONF_H */
 430
 431
 432 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/