docs/boards/DALRCF722DUAL.md

   1 # Board - DALRCF722DUAL
   2
   3 The DALRCF722DUAL  described here:
   4 http://www.dalrcmodel.com/DALRC/plus/view.php?aid=188
   5
   6 This board use the STM32F722RET6 microcontroller and have the following features:
   7 * High-performance and DSP with FPU, ARM Cortex-M7 MCU with 512 Kbytes Flash
   8 * 216 MHz CPU,462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1) and DSP instructions, Art Accelerator, L1 cache, SDRAM
   9 * DUAL gyro MPU6000 and ICM20602,could choose mpu6000,more stable and smooth.Or choose ICM20602,higher rate(32K/32K).Choose on CLI mode,experience different feature gyro on same board
  10 * OSD on board
  11 * The 16M byte SPI flash on board for data logging
  12 * USB VCP and boot select button on board(for DFU)
  13 * Stable voltage regulation,DUAL BEC  5v/2.5A and 10v/2A for VTX/camera etc.And could select 5v/10v with pad
  14 * Serial LED interface(LED_STRIP)
  15 * VBAT/CURR/RSSI sensors input
  16 * Suppose IRC Tramp/smart audio/FPV Camera Control/FPORT/telemetry
  17 * Supports SBus(built-in inverters), Spektrum1024/2048, PPM
  18 * Supports I2C device extend(baro/compass/OLED etc)(socket)
  19 * Supports GPS (socket)
  20
  21 ### All uarts have pad on board
  22 | Value | Identifier   | RX   | TX   | Notes                                                                                       |
  23 | ----- | ------------ | -----| -----| ------------------------------------------------------------------------------------------- |
  24 | 1     | USART1       | PB7  |  PB6 |  PB7 FOR SBUS IN(inverter build in)/PPM                                                         |
  25 | 2     | USART2       | PA3  |  PA2 |  PAD USE FOR TRAMP/smart audio                                                              |
  26 | 3     | USART3       | PC11 |  PC10|  USE FOR GPS                                                                                |
  27 | 4     | USART4       | PA1  |  PA0 |  PA0 FOR RSSI/FPORT/TEL etc                                                                 |
  28 | 5     | USART5       | PD2  |  PC12|  PAD                                                                                        |
  29
  30
  31 ### I2C with GPS port together.Use for BARO or compass etc
  32 | Value | Identifier   | function |  pin   | Notes                                                                                 |
  33 | ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
  34 | 1     | I2C1         |    SDA   |  PB9   |
  35 | 2     | I2C1         |    SCL   |  PB8   |
  36
  37
  38 ### Buzzer/LED output
  39 | Value | Identifier   | function |  pin   | Notes                                                                                 |
  40 | ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
  41 | 1     | LED0         |    LED   |  PC14  |On board
  42 | 2     | BEEPER       |    BEE   |  PC13  |Pad
  43
  44
  45 ### VBAT input with 1/10 divider ratio,Current signal input,Analog/digit RSSI input
  46 | Value | Identifier   | function  |  pin  | Notes                                                                                 |
  47 | ----- | ------------ | ----------| ------| ------------------------------------------------------------------------------------- |
  48 | 1     | ADC1         |    VBAT   |  PC1  |
  49 | 2     | ADC1         |    CURR   |  PC0  |
  50 | 3     | ADC1         |    RSSI   |  PA0  |
  51
  52
  53 ### 8 Outputs
  54 | Value | Identifier   | function  |  pin  | Notes                                                                                 |
  55 | ----- | ------------ | ----------| ------| ------------------------------------------------------------------------------------- |
  56 | 1     | TIM4_CH2     |    PPM    |  PB7  |  PPM
  57 | 2     | TIM8_CH1     |    OUPUT1 |  PC6  |  DMA
  58 | 3     | TIM8_CH2     |    OUPUT2 |  PC7  |  DMA
  59 | 4     | TIM8_CH3     |    OUPUT3 |  PC8  |  DMA
  60 | 5     | TIM8_CH4     |    OUPUT4 |  PC9  |  DMA
  61 | 6     | TIM1_CH1     |    OUPUT5 |  PA8  |  DMA
  62 | 7     | TIM1_CH2     |    OUPUT6 |  PA9  |  DMA
  63 | 8     | TIM1_CH3     |    OUPUT7 |  PA10 |  DMA   NO PAD
  64 | 9     | TIM2_CH4     |    OUPUT8 |  PB11 |  NO PAD
  65 | 10    | TIM2_CH1     |    PWM    |  PA15 |  DMA  LED_STRIP
  66 | 11    | TIM3_CH4     |    PWM    |  PB1  |  FPV Camera Control(FCAM)
  67
  68
  69 ### Gyro & ACC ,support ICM20602 and MPU6000
  70 | Value | Identifier   | function |  pin   | Notes                                                                                 |
  71 | ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
  72 | 1     | SPI1         |    SCK   |  PA5   | MPU6000 & ICM20602
  73 | 2     | SPI1         |    MISO  |  PA6   | MPU6000 & ICM20602
  74 | 3     | SPI1         |    MOSI  |  PA7   | MPU6000 & ICM20602
  75 | 4     | SPI1         |    CS1   |  PB0   | MPU6000
  76 | 5     | SPI1         |    CS2   |  PA4   | ICM20602
  77 | 6     | SPI1         |    INT1  |  PB10  | MPU6000
  78 | 7     | SPI1         |    INT2  |  PC4   | ICM20602
  79
  80 ### OSD MAX7456
  81 | Value | Identifier   | function |  pin   | Notes                                                                                 |
  82 | ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
  83 | 1     | SPI2         |    SCK   |  PB13  |
  84 | 2     | SPI2         |    MISO  |  PB14  |
  85 | 3     | SPI2         |    MOSI  |  PB15  |
  86 | 4     | SPI2         |    CS    |  PB12  |
  87
  88 ### 16Mbyte flash
  89 | Value | Identifier   | function |  pin   | Notes                                                                                 |
  90 | ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- |
  91 | 1     | SPI3         |    SCK   |  PB3   |
  92 | 2     | SPI3         |    MISO  |  PB4   |
  93 | 3     | SPI3         |    MOSI  |  PB4   |
  94 | 4     | SPI3         |    CS    |  PB2   |
  95
  96 ### SWD
  97 | Pin | Function       | Notes                                        |
  98 | --- | -------------- | -------------------------------------------- |
  99 | 1   | SWCLK          | PAD                                          |
 100 | 2   | Ground         | PAD                                          |
 101 | 3   | SWDIO          | PAD                                          |
 102 | 4   | 3V3            | PAD                                          |
 103
 104
 105 ### Designers
 106 * ZhengNyway(nyway@vip.qq.com) FROM DALRC
 107
 108
 109
 110
 111