ospf6d/OSPFv3-MIB.txt

   1 OSPFV3-MIB DEFINITIONS ::= BEGIN
   2
   3 IMPORTS
   4         MODULE-IDENTITY, OBJECT-TYPE, mib-2, experimental,
   5         Counter32, Gauge32, Integer32, IpAddress,
   6         Unsigned32
   7                 FROM SNMPv2-SMI
   8         TEXTUAL-CONVENTION, TruthValue, StorageType, RowStatus
   9                 FROM SNMPv2-TC
  10         MODULE-COMPLIANCE, OBJECT-GROUP
  11                 FROM SNMPv2-CONF
  12         InterfaceIndex
  13                 FROM IF-MIB
  14         InetAddressType, InetAddress, InetAddressPrefixLength
  15                 FROM INET-ADDRESS-MIB
  16         AreaID, RouterID, Metric, BigMetric, Status,
  17         HelloRange, DesignatedRouterPriority
  18                 FROM OSPF-MIB;
  19
  20 ospfv3MIB MODULE-IDENTITY
  21         LAST-UPDATED "200404081200Z"
  22         ORGANIZATION "IETF OSPF Working Group"
  23         CONTACT-INFO
  24             "WG E-Mail: ospf@peach.ease.lsoft.com
  25              WG Chairs: John.Moy@sycamorenet.com
  26                         acee@redback.com
  27                         rohit@xebeo.com
  28
  29              Dan Joyal
  30              Nortel Networks
  31              600 Technology Park Drive
  32              Billerica, MA  01821, USA
  33              djoyal@nortelnetworks.com
  34
  35              Vishwas Manral
  36              SiNett Corporation
  37              2/1, First Floor
  38              Embassy Icon Annex
  39              Infantry Road
  40              Bangalore 560001
  41              vishwas@sinett.com"
  42
  43          DESCRIPTION
  44              "The MIB module to describe OSPF version 3"
  45          REVISION "200404081200Z"
  46          DESCRIPTION -- RFC Editor assigns RFC xxxx
  47              "Initial version, published as RFC xxxx"
  48          ::= { experimental 102 } -- IANA assigns xx
  49
  50 -- Texual conventions
  51
  52 UpToRefreshInterval ::= TEXTUAL-CONVENTION
  53          STATUS        current
  54          DESCRIPTION
  55             "The values one might be able to configure for
  56             variables bounded by the Refresh Interval"
  57          SYNTAX        Integer32 (1..1800)
  58
  59 RouterDeadRange ::= TEXTUAL-CONVENTION
  60          STATUS        current
  61          DESCRIPTION
  62             "The range of intervals in seconds that a routers hello
  63             must have not been seen before a neighbor declares the
  64             router down"
  65          SYNTAX        Integer32 (1..'FFFF'h)
  66
  67
  68 -- Top-level structure of MIB
  69 ospfv3Objects        OBJECT IDENTIFIER ::= { ospfv3MIB 1 }
  70 ospfv3Conformance    OBJECT IDENTIFIER ::= { ospfv3MIB 2 }
  71
  72 -- OSPFv3 General Variables
  73
  74 -- These parameters apply globally to the Router's
  75 -- OSPFv3 Process.
  76
  77 ospfv3GeneralGroup OBJECT IDENTIFIER ::= { ospfv3Objects 1 }
  78
  79 ospfv3RouterId OBJECT-TYPE
  80         SYNTAX         RouterID
  81         MAX-ACCESS     read-write
  82         STATUS         current
  83         DESCRIPTION
  84             "A  32-bit  integer  uniquely  identifying  the
  85             router in the Autonomous System.
  86             To  ensure  uniqueness, this may
  87             default  to  the  value  of  one of the
  88             router's IPv4 interface addresses if IPv4 is
  89             configured on the router."
  90         ::= { ospfv3GeneralGroup 1 }
  91
  92 ospfv3AdminStat OBJECT-TYPE
  93         SYNTAX          Status
  94         MAX-ACCESS      read-write
  95         STATUS          current
  96         DESCRIPTION
  97             "The  administrative  status  of  OSPFv3  in  the
  98             router.   The  value 'enabled' denotes that the
  99             OSPFv3 Process is active on at least  one  inter-
 100             face;  'disabled'  disables  it  on  all inter-
 101             faces."
 102         ::= { ospfv3GeneralGroup 2 }
 103
 104 ospfv3VersionNumber OBJECT-TYPE
 105         SYNTAX          INTEGER { version3(3) }
 106         MAX-ACCESS      read-only
 107         STATUS          current
 108         DESCRIPTION
 109             "The version number of OSPF for IPv6 is 3."
 110         ::= { ospfv3GeneralGroup 3 }
 111
 112 ospfv3AreaBdrRtrStatus OBJECT-TYPE
 113         SYNTAX          TruthValue
 114         MAX-ACCESS      read-only
 115         STATUS          current
 116         DESCRIPTION
 117             "A flag to note whether this router is an  area
 118             border router."
 119         REFERENCE
 120             "OSPF Version 2, Section 3 Splitting the AS into
 121             Areas"
 122         ::= { ospfv3GeneralGroup 4 }
 123
 124 ospfv3ASBdrRtrStatus OBJECT-TYPE
 125         SYNTAX          TruthValue
 126         MAX-ACCESS      read-write
 127         STATUS          current
 128         DESCRIPTION
 129             "A flag to note whether this router is  config-
 130             ured as an Autonomous System border router."
 131         REFERENCE
 132             "OSPF Version 2, Section 3.3  Classification  of
 133             routers"
 134         ::= { ospfv3GeneralGroup 5 }
 135
 136 ospfv3AsScopeLsaCount OBJECT-TYPE
 137         SYNTAX          Gauge32
 138         MAX-ACCESS      read-only
 139         STATUS          current
 140         DESCRIPTION
 141             "The number of AS-Scope (e.g. AS-External) link-state
 142             advertisements in the link-state database."
 143         ::= { ospfv3GeneralGroup 6 }
 144
 145 ospfv3AsScopeLsaCksumSum OBJECT-TYPE
 146         SYNTAX          Integer32
 147         MAX-ACCESS      read-only
 148         STATUS          current
 149         DESCRIPTION
 150             "The 32-bit unsigned sum of the LS checksums of
 151             the  AS-scoped link-state advertisements  con-
 152             tained in the link-state database. This sum
 153             can  be  used  to determine if there has been a
 154             change in a router's link state  database,  and
 155             to  compare  the  link-state  database  of  two
 156             routers."
 157         ::= { ospfv3GeneralGroup 7 }
 158
 159 ospfv3OriginateNewLsas OBJECT-TYPE
 160         SYNTAX          Counter32
 161         MAX-ACCESS      read-only
 162         STATUS          current
 163         DESCRIPTION
 164             "The number of  new  link-state  advertisements
 165             that  have been originated.  This number is in-
 166             cremented each time the router originates a new
 167             LSA."
 168         ::= { ospfv3GeneralGroup 8 }
 169
 170 ospfv3RxNewLsas OBJECT-TYPE
 171         SYNTAX          Counter32
 172         MAX-ACCESS      read-only
 173         STATUS          current
 174         DESCRIPTION
 175             "The number of  link-state  advertisements  re-
 176             ceived  determined  to  be  new instantiations.
 177             This number does not include  newer  instantia-
 178             tions  of self-originated link-state advertise-
 179             ments."
 180         ::= { ospfv3GeneralGroup 9 }
 181
 182 ospfv3ExtLsaCount OBJECT-TYPE
 183         SYNTAX          Gauge32
 184         MAX-ACCESS      read-only
 185         STATUS          current
 186         DESCRIPTION
 187             "The number of External(LS type 0x4005) in the link-
 188             state database"
 189         ::= { ospfv3GeneralGroup 10 }
 190
 191
 192 ospfv3ExtAreaLsdbLimit OBJECT-TYPE
 193         SYNTAX          Integer32 (-1..'7FFFFFFF'h)
 194         MAX-ACCESS      read-write
 195         STATUS          current
 196         DESCRIPTION
 197             "The  maximum   number   of   non-default   AS-
 198             external-LSAs entries that can be stored in the
 199             link-state database.  If the value is -1, then
 200             there is no limit.
 201
 202             When the number of non-default AS-external-LSAs
 203             in   a  router's  link-state  database  reaches
 204             ospfv3ExtAreaLsdbLimit, the router  enters  Overflow-
 205             State.   The   router  never  holds  more  than
 206             ospfv3ExtAreaLsdbLimit  non-default  AS-external-LSAs
 207             in  its  database. OspfExtAreaLsdbLimit MUST be set
 208             identically in all routers attached to the OSPFv3
 209             backbone  and/or  any regular OSPFv3 area. (i.e.,
 210             OSPFv3 stub areas and NSSAs are excluded)."
 211         ::= { ospfv3GeneralGroup 11 }
 212
 213 ospfv3MulticastExtensions OBJECT-TYPE
 214         SYNTAX          BITS {
 215                                  intraAreaMulticast(0),
 216                                  interAreaMulticast(1),
 217                                  interAsMulticast(2)
 218                              }
 219
 220         MAX-ACCESS      read-write
 221         STATUS          current
 222         DESCRIPTION
 223             "A Bit Mask indicating whether the router is
 224             forwarding IPv6 multicast datagrams
 225             based on the algorithms defined in the  Multi-
 226             cast Extensions to OSPF.
 227
 228             If intraAreaMulticast set, indicates that the router
 229             can forward  IPv6 multicast datagrams in the router's
 230             directly attached areas (called intra-area mul-
 231             ticast routing).
 232
 233             If interAreaMulticast set, indicates that the router
 234             can forward IPv6 multicast datagrams between OSPFv3
 235             areas (called inter-area multicast routing).
 236
 237             If interAsMulticast set, indicates that the router can
 238             forward  IPv6  multicast datagrams between Auto-
 239             nomous Systems (called inter-AS multicast rout-
 240             ing).
 241
 242             Only certain combinations of bit settings are
 243             allowed, namely:
 244                     - All bits cleared (no multicasting)
 245                     - intraAreaMulticast only,
 246                     - intraAreaMulticast and interAreaMulticast,
 247                     - intraAreaMulticast and interAsMulticast
 248                     - intraAreaMulticast, interAreaMulticast and
 249                             interAsMulticast
 250             By default, all bits are cleared."
 251         ::= { ospfv3GeneralGroup 12 }
 252
 253 ospfv3ExitOverflowInterval OBJECT-TYPE
 254         SYNTAX          Unsigned32
 255         UNITS           "seconds"
 256         MAX-ACCESS      read-write
 257         STATUS          current
 258         DESCRIPTION
 259             "The number of  seconds  that,  after  entering
 260             OverflowState,  a  router will attempt to leave
 261             OverflowState. This allows the router to  again
 262             originate  non-default  AS-External-LSAs.  When
 263             set to 0, the router will not  leave  Overflow-
 264             State until restarted."
 265         ::= { ospfv3GeneralGroup 13 }
 266
 267 ospfv3DemandExtensions OBJECT-TYPE
 268         SYNTAX         TruthValue
 269         MAX-ACCESS     read-write
 270         STATUS         current
 271         DESCRIPTION
 272             "The router's support for demand routing."
 273         REFERENCE
 274             "OSPF Version 2, Appendix on Demand Routing"
 275         ::= { ospfv3GeneralGroup 14 }
 276
 277 ospfv3TrafficEngineeringSupport OBJECT-TYPE
 278         SYNTAX          TruthValue
 279         MAX-ACCESS      read-write
 280         STATUS          current
 281         DESCRIPTION
 282             "The router's support for traffic engineering
 283             extensions."
 284         ::= { ospfv3GeneralGroup 15 }
 285
 286 ospfv3ReferenceBandwidth OBJECT-TYPE
 287        SYNTAX       Unsigned32
 288        MAX-ACCESS   read-write
 289        STATUS       current
 290        DESCRIPTION
 291           "Reference bandwidth in kilobits/second for
 292           calculating default interface metrics. The
 293           default value is 100,000 KBPS (100 MBPS)"
 294     ::= { ospfv3GeneralGroup 16 }
 295
 296 ospfv3RestartSupport OBJECT-TYPE
 297        SYNTAX       INTEGER { none (1),
 298                               plannedOnly (2),
 299                               plannedAndUnplanned (3)
 300                          }
 301        MAX-ACCESS   read-write
 302        STATUS       current
 303        DESCRIPTION
 304           "The router's support for OSPF hitless restart.
 305           Options include: no restart support, only planned
 306           restarts or both planned and unplanned restarts."
 307        ::= { ospfv3GeneralGroup 17 }
 308
 309 ospfv3RestartInterval OBJECT-TYPE
 310        SYNTAX       UpToRefreshInterval
 311        UNITS        "seconds"
 312        MAX-ACCESS   read-write
 313        STATUS       current
 314        DESCRIPTION
 315           "Configured OSPF hitless restart timeout interval."
 316        ::= { ospfv3GeneralGroup 18 }
 317
 318 ospfv3RestartStatus OBJECT-TYPE
 319        SYNTAX       INTEGER { notRestarting (1),
 320                               plannedRestart (2),
 321                               unplannedRestart (3)
 322                             }
 323        MAX-ACCESS   read-only
 324        STATUS       current
 325        DESCRIPTION
 326           "Current status of OSPF hitless restart."
 327        ::= { ospfv3GeneralGroup 19 }
 328
 329 ospfv3RestartAge OBJECT-TYPE
 330        SYNTAX       UpToRefreshInterval
 331        UNITS        "seconds"
 332        MAX-ACCESS   read-only
 333        STATUS       current
 334        DESCRIPTION
 335           "Remaining time in current OSPF hitless restart
 336           interval."
 337        ::= { ospfv3GeneralGroup 20 }
 338
 339 ospfv3RestartExitReason OBJECT-TYPE
 340        SYNTAX       INTEGER { none (1),           -- none attempted
 341                               inProgress (2),     -- restart in
 342                                                   -- progress
 343                               completed (3),      -- successfully
 344                                                   -- completed
 345                               timedOut (4),       -- timed out
 346                               topologyChanged (5) -- aborted due to
 347                                                   -- topologychange.
 348                             }
 349        MAX-ACCESS   read-only
 350        STATUS       current
 351        DESCRIPTION
 352           "Describes the outcome of the last attempt at a
 353           hitless restart. If the value is 'none', no restart
 354            has yet been attempted. If the value is 'inProgress',
 355           a restart attempt is currently underway."
 356     ::= { ospfv3GeneralGroup 21 }
 357
 358
 359 -- The OSPFv3 Area Data Structure contains information
 360 -- regarding the various areas. The interfaces and
 361 -- virtual links are configured as part of these areas.
 362 -- Area 0.0.0.0, by definition, is the Backbone Area
 363
 364 ospfv3AreaTable OBJECT-TYPE
 365         SYNTAX          SEQUENCE OF Ospfv3AreaEntry
 366         MAX-ACCESS      not-accessible
 367         STATUS          current
 368         DESCRIPTION
 369             "Information describing the configured  parame-
 370             ters  and cumulative statistics of the router's
 371             attached areas."
 372         REFERENCE
 373             "OSPF Version 2, Section 6 The Area Data Struc-
 374             ture"
 375         ::= { ospfv3Objects 2 }
 376
 377 ospfv3AreaEntry OBJECT-TYPE
 378         SYNTAX          Ospfv3AreaEntry
 379         MAX-ACCESS      not-accessible
 380         STATUS          current
 381         DESCRIPTION
 382             "Information describing the configured parame-
 383             ters and cumulative statistics of one of the
 384             router's attached areas."
 385         INDEX           { ospfv3AreaId }
 386         ::= { ospfv3AreaTable 1 }
 387
 388 Ospfv3AreaEntry ::= SEQUENCE {
 389         ospfv3AreaId
 390                 AreaID,
 391         ospfv3ImportAsExtern
 392                 INTEGER,
 393         ospfv3AreaSpfRuns
 394                 Counter32,
 395         ospfv3AreaBdrRtrCount
 396                 Gauge32,
 397         ospfv3AreaAsBdrRtrCount
 398                 Gauge32,
 399         ospfv3AreaScopeLsaCount
 400                 Gauge32,
 401         ospfv3AreaScopeLsaCksumSum
 402                 Integer32,
 403         ospfv3AreaSummary
 404                 INTEGER,
 405         ospfv3AreaStatus
 406                 RowStatus,
 407         ospfv3StubMetric
 408                 BigMetric,
 409         ospfv3AreaNssaTranslatorRole
 410                 INTEGER,
 411         ospfv3AreaNssaTranslatorState
 412                 INTEGER,
 413         ospfv3AreaNssaTranslatorStabilityInterval
 414                 Unsigned32,
 415         ospfv3AreaNssaTranslatorEvents
 416                 Counter32,
 417         ospfv3AreaStubMetricType
 418                 INTEGER
 419         }
 420
 421 ospfv3AreaId OBJECT-TYPE
 422         SYNTAX          AreaID
 423         MAX-ACCESS      read-only
 424         STATUS          current
 425         DESCRIPTION
 426             "A 32-bit integer uniquely identifying an area.
 427             Area ID 0.0.0.0 is used for the OSPFv3 backbone."
 428         REFERENCE
 429             "OSPF Version 2, Appendix C.2 Area parameters"
 430         ::= { ospfv3AreaEntry 1 }
 431
 432 ospfv3ImportAsExtern OBJECT-TYPE
 433         SYNTAX          INTEGER {
 434                         importExternal(1),   -- normal area
 435                         importNoExternal(2), -- stub area
 436                         importNssa(3)        -- not-so-stubby-area
 437                         }
 438         MAX-ACCESS      read-create
 439         STATUS          current
 440         DESCRIPTION
 441             "Indicates whether an area is a Stub area, NSSA, or
 442             standard area. AS-scope LSAs are not imported into Stub
 443             Areas or NSSAs. NSSAs import AS-External data as Type-7
 444             LSAs which have Area-scope"
 445         REFERENCE
 446             "OSPF Version 2, Appendix C.2 Area parameters"
 447         DEFVAL { importExternal }
 448         ::= { ospfv3AreaEntry 2 }
 449
 450 ospfv3AreaSpfRuns OBJECT-TYPE
 451         SYNTAX          Counter32
 452         MAX-ACCESS      read-only
 453         STATUS          current
 454         DESCRIPTION
 455             "The number of times that the intra-area  route
 456             table  has  been  calculated  using this area's
 457             link-state database.  This  is  typically  done
 458             using Dijkstra's algorithm."
 459         ::= { ospfv3AreaEntry 3 }
 460
 461 ospfv3AreaBdrRtrCount OBJECT-TYPE
 462         SYNTAX          Gauge32
 463         MAX-ACCESS      read-only
 464         STATUS          current
 465         DESCRIPTION
 466             "The total number of area border routers reach-
 467             able within this area.  This is initially zero,
 468             and is calculated in each SPF Pass."
 469         ::= { ospfv3AreaEntry 4 }
 470
 471 ospfv3AreaAsBdrRtrCount OBJECT-TYPE
 472         SYNTAX          Gauge32
 473         MAX-ACCESS      read-only
 474         STATUS          current
 475         DESCRIPTION
 476             "The total number of Autonomous  System  border
 477             routers  reachable  within  this area.  This is
 478             initially zero, and is calculated in  each  SPF
 479             Pass."
 480         ::= { ospfv3AreaEntry 5 }
 481
 482 ospfv3AreaScopeLsaCount OBJECT-TYPE
 483         SYNTAX          Gauge32
 484         MAX-ACCESS      read-only
 485         STATUS          current
 486         DESCRIPTION
 487             "The total number of Area-Scope link-state
 488             advertisements in  this  area's link-state
 489             database."
 490         ::= { ospfv3AreaEntry 6 }
 491
 492 ospfv3AreaScopeLsaCksumSum OBJECT-TYPE
 493         SYNTAX          Integer32
 494         MAX-ACCESS      read-only
 495         STATUS          current
 496         DESCRIPTION
 497             "The 32-bit unsigned sum of the Area-Scope link-state
 498             advertisements'  LS  checksums  contained in this
 499             area's link-state database.  The sum can be used
 500             to determine if  there  has been  a  change  in a
 501             router's link state database, and to compare the
 502             link-state database of two routers."
 503         ::= { ospfv3AreaEntry 7 }
 504
 505 ospfv3AreaSummary OBJECT-TYPE
 506         SYNTAX          INTEGER {
 507                         noAreaSummary(1),
 508                         sendAreaSummary(2)
 509                         }
 510         MAX-ACCESS      read-create
 511         STATUS          current
 512         DESCRIPTION
 513             "The variable ospfv3AreaSummary controls the  im-
 514             port  of  Inter-Area LSAs into stub areas.  It has
 515             no effect on other areas.
 516
 517             If it is noAreaSummary, the router will neither
 518             originate  nor  propagate Inter-Area LSAs into the
 519             stub area.  It will rely entirely  on  its  de-
 520             fault route.
 521
 522             If it is sendAreaSummary, the router will  both
 523             summarize and propagate Inter-Area LSAs."
 524         DEFVAL   { sendAreaSummary }
 525         ::= { ospfv3AreaEntry 8 }
 526
 527 ospfv3AreaStatus OBJECT-TYPE
 528         SYNTAX          RowStatus
 529         MAX-ACCESS      read-create
 530         STATUS          current
 531         DESCRIPTION
 532             "This variable controls the status of  the  en-
 533             try. The use of RowStatus is covered in more detail
 534             in [6]."
 535         ::= { ospfv3AreaEntry 9 }
 536
 537 ospfv3StubMetric OBJECT-TYPE
 538         SYNTAX          BigMetric
 539         MAX-ACCESS      read-create
 540         STATUS          current
 541         DESCRIPTION
 542             "The metric value advertised for the default route
 543              into Stub and NSSA areas."
 544         ::= { ospfv3AreaEntry 10 }
 545
 546 ospfv3AreaNssaTranslatorRole OBJECT-TYPE
 547         SYNTAX          INTEGER { always(1), candidate(2) }
 548         MAX-ACCESS      read-create
 549         STATUS          current
 550         DESCRIPTION
 551             "Indicates an NSSA Border router's ability to
 552             perform NSSA translation of type-7 LSAs into
 553             type-5 LSAs."
 554         DEFVAL { candidate }
 555         ::= { ospfv3AreaEntry 11 }
 556
 557 ospfv3AreaNssaTranslatorState OBJECT-TYPE
 558         SYNTAX          INTEGER {
 559                         enabled(1),
 560                         elected(2),
 561                         disabled(3)
 562                         }
 563         MAX-ACCESS      read-only
 564         STATUS          current
 565         DESCRIPTION
 566             "Indicates if and how an NSSA Border router is
 567              performing NSSA translation of type-7 LSAs into type-5
 568              LSAs. When this object is set to enabled, the NSSA
 569              Border router's ospfv3AreaNssTranslatorRole
 570              has been set to always. When this object is set to
 571              elected, a candidate NSSA Border router is translating
 572              type-7 LSAs into type-5. When this object is set to
 573              disabled, a candidate NSSA Border router is NOT
 574              translating type-7 LSAs into type-5."
 575         ::= { ospfv3AreaEntry 12 }
 576
 577 ospfv3AreaNssaTranslatorStabilityInterval OBJECT-TYPE
 578         SYNTAX          Unsigned32
 579         UNITS           "seconds"
 580         MAX-ACCESS      read-create
 581         STATUS          current
 582         DESCRIPTION
 583             "The number of seconds after an elected translator
 584             determines its services are no longer required, that
 585             it should continue to perform its translation duties."
 586         DEFVAL { 40 }
 587         ::= { ospfv3AreaEntry 13 }
 588
 589 ospfv3AreaNssaTranslatorEvents OBJECT-TYPE
 590         SYNTAX          Counter32
 591         MAX-ACCESS      read-only
 592         STATUS          current
 593         DESCRIPTION
 594             "Indicates the number of Translator State changes
 595             that have occurred since the last boot-up."
 596         ::= { ospfv3AreaEntry 14 }
 597
 598 ospfv3AreaStubMetricType OBJECT-TYPE
 599         SYNTAX       INTEGER {
 600                         ospfv3Metric (1),  -- OSPF Metric
 601                         comparableCost (2), -- external type 1
 602                         nonComparable  (3) -- external type 2
 603                         }
 604         MAX-ACCESS   read-create
 605         STATUS       current
 606         DESCRIPTION
 607            "This variable displays the type of metric ad-
 608            vertised as a default route."
 609         DEFVAL { ospfv3Metric }
 610         ::= { ospfv3AreaEntry 15 }
 611
 612 -- OSPFv3 AS-Scope Link State Database
 613
 614 -- The Link State Database contains the AS-Scope Link State
 615 -- Advertisements from throughout the areas that the
 616 -- device is attached to.
 617
 618 ospfv3AsLsdbTable OBJECT-TYPE
 619         SYNTAX          SEQUENCE OF Ospfv3AsLsdbEntry
 620         MAX-ACCESS      not-accessible
 621         STATUS          current
 622         DESCRIPTION
 623             "The OSPFv3 Process's AS-Scope Link State Database."
 624         ::= { ospfv3Objects 3 }
 625
 626 ospfv3AsLsdbEntry OBJECT-TYPE
 627         SYNTAX          Ospfv3AsLsdbEntry
 628         MAX-ACCESS      not-accessible
 629         STATUS          current
 630         DESCRIPTION
 631             "A single AS-Scope Link State Advertisement."
 632         INDEX           { ospfv3AsLsdbType,
 633                           ospfv3AsLsdbRouterId,
 634                           ospfv3AsLsdbLsid }
 635         ::= { ospfv3AsLsdbTable 1 }
 636
 637 Ospfv3AsLsdbEntry ::= SEQUENCE {
 638         ospfv3AsLsdbType
 639                 Unsigned32,
 640         ospfv3AsLsdbRouterId
 641                 RouterID,
 642         ospfv3AsLsdbLsid
 643                 IpAddress,
 644         ospfv3AsLsdbSequence
 645                 Integer32,
 646         ospfv3AsLsdbAge
 647                 Integer32,
 648         ospfv3AsLsdbChecksum
 649                 Integer32,
 650         ospfv3AsLsdbAdvertisement
 651                 OCTET STRING,
 652         ospfv3AsLsdbTypeKnown
 653                 TruthValue
 654         }
 655
 656 ospfv3AsLsdbType OBJECT-TYPE
 657         SYNTAX          Unsigned32 (0..4294967295)
 658         MAX-ACCESS      read-only
 659         STATUS          current
 660         DESCRIPTION
 661             "The type of the link state advertisement.
 662             Each link state type has a separate advertise-
 663             ment format. AS-Scope LSAs not recognized by
 664             the router may be stored in the database."
 665         ::= { ospfv3AsLsdbEntry 1 }
 666
 667 ospfv3AsLsdbRouterId OBJECT-TYPE
 668         SYNTAX          RouterID
 669         MAX-ACCESS      read-only
 670         STATUS          current
 671         DESCRIPTION
 672             "The 32 bit number that uniquely identifies the
 673             originating router in the Autonomous System."
 674         REFERENCE
 675             "OSPF Version 2, Appendix C.1 Global parameters"
 676         ::= { ospfv3AsLsdbEntry 2 }
 677
 678 ospfv3AsLsdbLsid OBJECT-TYPE
 679         SYNTAX          IpAddress
 680         MAX-ACCESS      read-only
 681         STATUS          current
 682         DESCRIPTION
 683             "The Link State ID is an LS Type Specific field
 684             containing a unique identifier;
 685             it identifies the piece of the  routing  domain
 686             that is being described by the advertisement.
 687             In contrast to OSPFv2, the LSID has no
 688             addressing semantics."
 689         ::= { ospfv3AsLsdbEntry 3 }
 690
 691 -- Note that the OSPF Sequence Number is a 32 bit signed
 692 -- integer.  It starts with the value '80000001'h,
 693 -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
 694 -- Thus, a typical sequence number will be very negative.
 695
 696 ospfv3AsLsdbSequence OBJECT-TYPE
 697         SYNTAX          Integer32
 698         MAX-ACCESS      read-only
 699         STATUS          current
 700         DESCRIPTION
 701             "The sequence number field is a  signed  32-bit
 702             integer.   It  is used to detect old and dupli-
 703             cate link state advertisements.  The  space  of
 704             sequence  numbers  is  linearly  ordered.   The
 705             larger the sequence number the more recent  the
 706             advertisement."
 707         REFERENCE
 708             "OSPF Version  2,  Section  12.1.6  LS  sequence
 709             number"
 710         ::= { ospfv3AsLsdbEntry 4 }
 711
 712 ospfv3AsLsdbAge OBJECT-TYPE
 713         SYNTAX          Integer32 -- Should be 0..MaxAge
 714                                   -- unless DoNotAge bit is set
 715         UNITS           "seconds"
 716         MAX-ACCESS      read-only
 717         STATUS          current
 718         DESCRIPTION
 719             "This field is the age of the link state adver-
 720             tisement in seconds."
 721         REFERENCE
 722             "OSPF Version 2, Section 12.1.1 LS age"
 723         ::= { ospfv3AsLsdbEntry 5 }
 724
 725 ospfv3AsLsdbChecksum OBJECT-TYPE
 726         SYNTAX          Integer32
 727         MAX-ACCESS      read-only
 728         STATUS          current
 729         DESCRIPTION
 730             "This field is the  checksum  of  the  complete
 731             contents  of  the  advertisement, excepting the
 732             age field.  The age field is excepted  so  that
 733             an   advertisement's  age  can  be  incremented
 734             without updating the  checksum.   The  checksum
 735             used  is  the same that is used for ISO connec-
 736             tionless datagrams; it is commonly referred  to
 737             as the Fletcher checksum."
 738         REFERENCE
 739             "OSPF Version 2, Section 12.1.7 LS checksum"
 740         ::= { ospfv3AsLsdbEntry 6 }
 741
 742 ospfv3AsLsdbAdvertisement OBJECT-TYPE
 743         SYNTAX          OCTET STRING (SIZE (1..65535))
 744         MAX-ACCESS      read-only
 745         STATUS          current
 746         DESCRIPTION
 747             "The entire Link State Advertisement, including
 748             its header."
 749         ::= { ospfv3AsLsdbEntry 7 }
 750
 751 ospfv3AsLsdbTypeKnown OBJECT-TYPE
 752         SYNTAX          TruthValue
 753         MAX-ACCESS      read-only
 754         STATUS          current
 755         DESCRIPTION
 756             "Is the LSA type recognized by this Router?"
 757         ::= { ospfv3AsLsdbEntry 8 }
 758
 759
 760 -- OSPFv3 Area-Scope Link State Database
 761
 762 -- The Link State Database contains the Area-Scope Link State
 763 -- Advertisements from throughout the area that the
 764 -- device is attached to.
 765
 766 ospfv3AreaLsdbTable OBJECT-TYPE
 767         SYNTAX          SEQUENCE OF Ospfv3AreaLsdbEntry
 768         MAX-ACCESS      not-accessible
 769         STATUS          current
 770         DESCRIPTION
 771             "The OSPFv3 Process's Area-Scope Link State Database."
 772         ::= { ospfv3Objects 4 }
 773
 774 ospfv3AreaLsdbEntry OBJECT-TYPE
 775         SYNTAX          Ospfv3AreaLsdbEntry
 776         MAX-ACCESS      not-accessible
 777         STATUS          current
 778         DESCRIPTION
 779             "A single Area-Scope Link State Advertisement."
 780         INDEX           { ospfv3AreaLsdbAreaId,
 781                           ospfv3AreaLsdbType,
 782                           ospfv3AreaLsdbRouterId,
 783                           ospfv3AreaLsdbLsid }
 784         ::= { ospfv3AreaLsdbTable 1 }
 785
 786 Ospfv3AreaLsdbEntry ::= SEQUENCE {
 787         ospfv3AreaLsdbAreaId
 788                 AreaID,
 789         ospfv3AreaLsdbType
 790                 Unsigned32,
 791         ospfv3AreaLsdbRouterId
 792                 RouterID,
 793         ospfv3AreaLsdbLsid
 794                 IpAddress,
 795         ospfv3AreaLsdbSequence
 796                 Integer32,
 797         ospfv3AreaLsdbAge
 798                 Integer32,
 799         ospfv3AreaLsdbChecksum
 800                 Integer32,
 801         ospfv3AreaLsdbAdvertisement
 802                 OCTET STRING,
 803         ospfv3AreaLsdbTypeKnown
 804                 TruthValue
 805         }
 806
 807 ospfv3AreaLsdbAreaId OBJECT-TYPE
 808         SYNTAX          AreaID
 809         MAX-ACCESS      read-only
 810         STATUS          current
 811         DESCRIPTION
 812             "The 32 bit identifier of the Area from which the
 813             LSA was received."
 814         REFERENCE
 815             "OSPF Version 2, Appendix C.2 Area parameters"
 816         ::= { ospfv3AreaLsdbEntry 1 }
 817
 818 ospfv3AreaLsdbType OBJECT-TYPE
 819         SYNTAX          Unsigned32 (0..4294967295)
 820         MAX-ACCESS      read-only
 821         STATUS          current
 822         DESCRIPTION
 823             "The type  of  the  link  state  advertisement.
 824             Each  link state type has a separate advertise-
 825             ment format. Area-Scope LSAs unrecognized by the
 826             router are also stored in this database."
 827         ::= { ospfv3AreaLsdbEntry 2 }
 828
 829 ospfv3AreaLsdbRouterId OBJECT-TYPE
 830         SYNTAX          RouterID
 831         MAX-ACCESS      read-only
 832         STATUS          current
 833         DESCRIPTION
 834             "The 32 bit number that uniquely identifies the
 835             originating router in the Autonomous System."
 836         REFERENCE
 837             "OSPF Version 2, Appendix C.1 Global parameters"
 838         ::= { ospfv3AreaLsdbEntry 3 }
 839
 840 ospfv3AreaLsdbLsid OBJECT-TYPE
 841         SYNTAX          IpAddress
 842         MAX-ACCESS      read-only
 843         STATUS          current
 844         DESCRIPTION
 845             "The Link State ID is an LS Type Specific field
 846             containing a unique identifier;
 847             it identifies the piece of the  routing  domain
 848             that is being described by the advertisement.
 849             In contrast to OSPFv2, the LSID has no
 850             addressing semantics."
 851         ::= { ospfv3AreaLsdbEntry 4 }
 852
 853 -- Note that the OSPF Sequence Number is a 32 bit signed
 854 -- integer.  It starts with the value '80000001'h,
 855 -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
 856 -- Thus, a typical sequence number will be very negative.
 857
 858 ospfv3AreaLsdbSequence OBJECT-TYPE
 859         SYNTAX          Integer32
 860         MAX-ACCESS      read-only
 861         STATUS          current
 862         DESCRIPTION
 863             "The sequence number field is a  signed  32-bit
 864             integer.   It  is used to detect old and dupli-
 865             cate link state advertisements.  The  space  of
 866             sequence  numbers  is  linearly  ordered.   The
 867             larger the sequence number the more recent  the
 868             advertisement."
 869         REFERENCE
 870             "OSPF Version  2,  Section  12.1.6  LS  sequence
 871             number"
 872         ::= { ospfv3AreaLsdbEntry 5 }
 873
 874 ospfv3AreaLsdbAge OBJECT-TYPE
 875         SYNTAX          Integer32 -- Should be 0..MaxAge
 876                                   -- unless DoNotAge bit is set
 877         UNITS           "seconds"
 878         MAX-ACCESS      read-only
 879         STATUS          current
 880         DESCRIPTION
 881             "This field is the age of the link state adver-
 882             tisement in seconds."
 883         REFERENCE
 884             "OSPF Version 2, Section 12.1.1 LS age"
 885         ::= { ospfv3AreaLsdbEntry 6 }
 886
 887 ospfv3AreaLsdbChecksum OBJECT-TYPE
 888         SYNTAX          Integer32
 889         MAX-ACCESS      read-only
 890         STATUS          current
 891         DESCRIPTION
 892             "This field is the  checksum  of  the  complete
 893             contents  of  the  advertisement, excepting the
 894             age field.  The age field is excepted  so  that
 895             an   advertisement's  age  can  be  incremented
 896             without updating the  checksum.   The  checksum
 897             used  is  the same that is used for ISO connec-
 898             tionless datagrams; it is commonly referred  to
 899             as the Fletcher checksum."
 900         REFERENCE
 901             "OSPF Version 2, Section 12.1.7 LS checksum"
 902         ::= { ospfv3AreaLsdbEntry 7 }
 903
 904 ospfv3AreaLsdbAdvertisement OBJECT-TYPE
 905         SYNTAX          OCTET STRING (SIZE (1..65535))
 906         MAX-ACCESS      read-only
 907         STATUS          current
 908         DESCRIPTION
 909             "The entire Link State Advertisement, including
 910             its header."
 911         ::= { ospfv3AreaLsdbEntry 8 }
 912
 913 ospfv3AreaLsdbTypeKnown OBJECT-TYPE
 914         SYNTAX          TruthValue
 915         MAX-ACCESS      read-only
 916         STATUS          current
 917         DESCRIPTION
 918             "Is the LSA type recognized by this Router?"
 919         ::= { ospfv3AreaLsdbEntry 9 }
 920
 921 -- OSPFv3 Link-Scope Link State Database
 922
 923 -- The Link State Database contains the Link-Scope Link State
 924 -- Advertisements from the links that the
 925 -- device is attached to.
 926
 927 ospfv3LinkLsdbTable OBJECT-TYPE
 928         SYNTAX          SEQUENCE OF Ospfv3LinkLsdbEntry
 929         MAX-ACCESS      not-accessible
 930         STATUS          current
 931         DESCRIPTION
 932             "The OSPFv3 Process's Link-Scope Link State Database."
 933         ::= { ospfv3Objects 5 }
 934
 935 ospfv3LinkLsdbEntry OBJECT-TYPE
 936         SYNTAX          Ospfv3LinkLsdbEntry
 937         MAX-ACCESS      not-accessible
 938         STATUS          current
 939         DESCRIPTION
 940             "A single Link-Scope Link State Advertisement."
 941         INDEX           { ospfv3LinkLsdbIfIndex,
 942                           ospfv3LinkLsdbType,
 943                           ospfv3LinkLsdbRouterId,
 944                           ospfv3LinkLsdbLsid }
 945         ::= { ospfv3LinkLsdbTable 1 }
 946
 947 Ospfv3LinkLsdbEntry ::= SEQUENCE {
 948         ospfv3LinkLsdbIfIndex
 949                 InterfaceIndex,
 950         ospfv3LinkLsdbType
 951                 Unsigned32,
 952         ospfv3LinkLsdbRouterId
 953                 RouterID,
 954         ospfv3LinkLsdbLsid
 955                 IpAddress,
 956         ospfv3LinkLsdbSequence
 957                 Integer32,
 958         ospfv3LinkLsdbAge
 959                 Integer32,
 960         ospfv3LinkLsdbChecksum
 961                 Integer32,
 962         ospfv3LinkLsdbAdvertisement
 963                 OCTET STRING,
 964         ospfv3LinkLsdbTypeKnown
 965                 TruthValue
 966         }
 967
 968 ospfv3LinkLsdbIfIndex OBJECT-TYPE
 969         SYNTAX         InterfaceIndex
 970         MAX-ACCESS     read-only
 971         STATUS         current
 972         DESCRIPTION
 973             "The identifier of the link from which the LSA
 974             was received."
 975         REFERENCE
 976             "OSPF Version 2, Appendix C.2 Area parameters"
 977         ::= { ospfv3LinkLsdbEntry 1 }
 978
 979 ospfv3LinkLsdbType OBJECT-TYPE
 980         SYNTAX          Unsigned32 (0..4294967295)
 981         MAX-ACCESS      read-only
 982         STATUS          current
 983         DESCRIPTION
 984             "The type of the link state advertisement.
 985             Each link state type has a separate advertise-
 986             ment format. Link-Scope LSAs unrecognized by the
 987             router are also stored in this database."
 988         ::= { ospfv3LinkLsdbEntry 2 }
 989
 990 ospfv3LinkLsdbRouterId OBJECT-TYPE
 991         SYNTAX          RouterID
 992         MAX-ACCESS      read-only
 993         STATUS          current
 994         DESCRIPTION
 995             "The 32 bit number that uniquely identifies the
 996             originating router in the Autonomous System."
 997         REFERENCE
 998             "OSPF Version 2, Appendix C.1 Global parameters"
 999         ::= { ospfv3LinkLsdbEntry 3 }
1000
1001 ospfv3LinkLsdbLsid OBJECT-TYPE
1002         SYNTAX        IpAddress
1003         MAX-ACCESS    read-only
1004         STATUS        current
1005         DESCRIPTION
1006             "The Link State ID is an LS Type Specific field
1007             containing a unique identifier;
1008             it identifies the piece of the  routing  domain
1009             that is being described by the advertisement.
1010             In contrast to OSPFv2, the LSID has no
1011             addressing semantics."
1012         ::= { ospfv3LinkLsdbEntry 4 }
1013
1014 -- Note that the OSPF Sequence Number is a 32 bit signed
1015 -- integer.  It starts with the value '80000001'h,
1016 -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
1017 -- Thus, a typical sequence number will be very negative.
1018
1019 ospfv3LinkLsdbSequence OBJECT-TYPE
1020         SYNTAX          Integer32
1021         MAX-ACCESS      read-only
1022         STATUS          current
1023         DESCRIPTION
1024             "The sequence number field is a  signed  32-bit
1025             integer.   It  is used to detect old and dupli-
1026             cate link state advertisements.  The  space  of
1027             sequence  numbers  is  linearly  ordered.   The
1028             larger the sequence number the more recent  the
1029             advertisement."
1030         REFERENCE
1031             "OSPF Version  2,  Section  12.1.6  LS  sequence
1032             number"
1033         ::= { ospfv3LinkLsdbEntry 5 }
1034
1035 ospfv3LinkLsdbAge OBJECT-TYPE
1036         SYNTAX          Integer32 -- Should be 0..MaxAge
1037                                   -- unless DoNotAge bit is set
1038         UNITS           "seconds"
1039         MAX-ACCESS      read-only
1040         STATUS          current
1041         DESCRIPTION
1042             "This field is the age of the link state
1043             advertisement in seconds."
1044         REFERENCE
1045             "OSPF Version 2, Section 12.1.1 LS age"
1046         ::= { ospfv3LinkLsdbEntry 6 }
1047
1048 ospfv3LinkLsdbChecksum OBJECT-TYPE
1049         SYNTAX          Integer32
1050         MAX-ACCESS      read-only
1051         STATUS          current
1052         DESCRIPTION
1053             "This field is the  checksum  of  the  complete
1054             contents  of  the  advertisement, excepting the
1055             age field.  The age field is excepted  so  that
1056             an   advertisement's  age  can  be  incremented
1057             without updating the  checksum.   The  checksum
1058             used  is  the same that is used for ISO connec-
1059             tionless datagrams; it is commonly referred  to
1060             as the Fletcher checksum."
1061         REFERENCE
1062             "OSPF Version 2, Section 12.1.7 LS checksum"
1063         ::= { ospfv3LinkLsdbEntry 7 }
1064
1065 ospfv3LinkLsdbAdvertisement OBJECT-TYPE
1066         SYNTAX          OCTET STRING (SIZE (1..65535))
1067         MAX-ACCESS      read-only
1068         STATUS          current
1069         DESCRIPTION
1070             "The entire Link State Advertisement, including
1071             its header."
1072         ::= { ospfv3LinkLsdbEntry 8 }
1073
1074 ospfv3LinkLsdbTypeKnown OBJECT-TYPE
1075         SYNTAX          TruthValue
1076         MAX-ACCESS      read-only
1077         STATUS          current
1078         DESCRIPTION
1079             "Indicates whether the LSA type is recognized by this
1080              Router."
1081         ::= { ospfv3LinkLsdbEntry 9 }
1082
1083
1084 -- OSPF Host Table
1085
1086 -- The Host/Metric Table indicates what hosts are directly
1087 -- attached to the Router, and what metrics and types of
1088 -- service should be advertised for them.
1089
1090 ospfv3HostTable OBJECT-TYPE
1091         SYNTAX          SEQUENCE OF Ospfv3HostEntry
1092         MAX-ACCESS      not-accessible
1093         STATUS          current
1094         DESCRIPTION
1095             "The list of Hosts, and their metrics, that the
1096             router will advertise as host routes."
1097         REFERENCE
1098             "OSPF Version 2, Appendix C.6  Host route param-
1099             eters"
1100         ::= { ospfv3Objects 6 }
1101
1102 ospfv3HostEntry OBJECT-TYPE
1103         SYNTAX          Ospfv3HostEntry
1104         MAX-ACCESS      not-accessible
1105         STATUS          current
1106         DESCRIPTION
1107             "A metric to be advertised when a given host is
1108             reachable."
1109         INDEX           { ospfv3HostAddressType,
1110                           ospfv3HostAddress }
1111         ::= { ospfv3HostTable 1 }
1112
1113 Ospfv3HostEntry ::= SEQUENCE {
1114         ospfv3HostAddressType
1115                 InetAddressType,
1116         ospfv3HostAddress
1117                 InetAddress,
1118         ospfv3HostMetric
1119                 Metric,
1120         ospfv3HostStatus
1121                 RowStatus,
1122         ospfv3HostAreaID
1123                 AreaID
1124         }
1125
1126 ospfv3HostAddressType OBJECT-TYPE
1127         SYNTAX          InetAddressType
1128         MAX-ACCESS      read-only
1129         STATUS          current
1130         DESCRIPTION
1131             "The address type of ospfv3HostAddress. Only IPv6
1132             addresses without zone index are expected."
1133         REFERENCE
1134             "OSPF Version 2, Appendix C.6 Host route parame-
1135             ters"
1136         ::= { ospfv3HostEntry 1 }
1137
1138
1139 ospfv3HostAddress OBJECT-TYPE
1140         SYNTAX          InetAddress (SIZE (16))
1141         MAX-ACCESS      read-only
1142         STATUS          current
1143         DESCRIPTION
1144             "The IPv6 Address of the Host. Must be a Global
1145              or Site-local address."
1146         REFERENCE
1147             "OSPF Version 2, Appendix C.6 Host route parame-
1148             ters"
1149         ::= { ospfv3HostEntry 2 }
1150
1151 ospfv3HostMetric OBJECT-TYPE
1152         SYNTAX          Metric
1153         MAX-ACCESS      read-create
1154         STATUS          current
1155         DESCRIPTION
1156             "The Metric to be advertised."
1157         REFERENCE
1158             "OSPF Version 2, Appendix C.6 Host route parame-
1159             ters"
1160         ::= { ospfv3HostEntry 3 }
1161
1162 ospfv3HostStatus OBJECT-TYPE
1163         SYNTAX          RowStatus
1164         MAX-ACCESS      read-create
1165         STATUS          current
1166         DESCRIPTION
1167             "This variable controls the status of  the  en-
1168             try. The use of RowStatus is covered in more detail
1169             in [6]."
1170         ::= { ospfv3HostEntry 4 }
1171
1172 ospfv3HostAreaID OBJECT-TYPE
1173         SYNTAX          AreaID
1174         MAX-ACCESS      read-create
1175         STATUS          current
1176         DESCRIPTION
1177             "The Area the Host Entry is to be found within.
1178             By  default, the area that a subsuming OSPFv3 in-
1179             terface is in, or 0.0.0.0"
1180         REFERENCE
1181             "OSPF Version 2, Appendix C.2 Area parameters"
1182         ::= { ospfv3HostEntry 5 }
1183
1184 -- OSPFv3 Interface Table
1185
1186 ospfv3IfTable OBJECT-TYPE
1187         SYNTAX          SEQUENCE OF Ospfv3IfEntry
1188         MAX-ACCESS      not-accessible
1189         STATUS          current
1190         DESCRIPTION
1191             "The OSPFv3 Interface Table describes the  inter-
1192             faces from the viewpoint of OSPFv3."
1193         REFERENCE
1194             "OSPF Version 2, Appendix C.3  Router  interface
1195             parameters"
1196         ::= { ospfv3Objects 7 }
1197
1198 ospfv3IfEntry OBJECT-TYPE
1199         SYNTAX          Ospfv3IfEntry
1200         MAX-ACCESS      not-accessible
1201         STATUS          current
1202         DESCRIPTION
1203             "The OSPFv3 Interface Entry describes one  inter-
1204             face from the viewpoint of OSPFv3."
1205         INDEX           { ospfv3IfIndex }
1206         ::= { ospfv3IfTable 1 }
1207
1208
1209 Ospfv3IfEntry ::= SEQUENCE {
1210         ospfv3IfIndex
1211                 InterfaceIndex,
1212         ospfv3IfAreaId
1213                 AreaID,
1214         ospfv3IfType
1215                 INTEGER,
1216         ospfv3IfAdminStat
1217                 Status,
1218         ospfv3IfRtrPriority
1219                 DesignatedRouterPriority,
1220         ospfv3IfTransitDelay
1221                 UpToRefreshInterval,
1222         ospfv3IfRetransInterval
1223                 UpToRefreshInterval,
1224         ospfv3IfHelloInterval
1225                 HelloRange,
1226         ospfv3IfRtrDeadInterval
1227                  RouterDeadRange,
1228         ospfv3IfPollInterval
1229                 Unsigned32,
1230         ospfv3IfState
1231                 INTEGER,
1232         ospfv3IfDesignatedRouter
1233                 RouterID,
1234         ospfv3IfBackupDesignatedRouter
1235                 RouterID,
1236         ospfv3IfEvents
1237                 Counter32,
1238         ospfv3IfStatus
1239                 RowStatus,
1240         ospfv3IfMulticastForwarding
1241                 INTEGER,
1242         ospfv3IfDemand
1243                 TruthValue,
1244         ospfv3IfMetricValue
1245                 Metric,
1246         ospfv3IfLinkScopeLsaCount
1247                 Gauge32,
1248         ospfv3IfLinkLsaCksumSum
1249                 Integer32,
1250         ospfv3IfInstId
1251                 Integer32,
1252         ospfv3IfDemandNbrProbe
1253                 TruthValue,
1254         ospfv3IfDemandNbrProbeRetxLimit
1255                 Unsigned32,
1256         ospfv3IfDemandNbrProbeInterval
1257                 Unsigned32
1258         }
1259
1260 ospfv3IfIndex OBJECT-TYPE
1261         SYNTAX          InterfaceIndex
1262         MAX-ACCESS      read-only
1263         STATUS          current
1264         DESCRIPTION
1265             "The interface index of this OSPFv3 interface.
1266              It corresponds to the interface index of the
1267              IPv6 interface on which OSPFv3 is configured."
1268         ::= { ospfv3IfEntry 1 }
1269
1270 ospfv3IfAreaId OBJECT-TYPE
1271         SYNTAX          AreaID
1272         MAX-ACCESS      read-create
1273         STATUS          current
1274         DESCRIPTION
1275             "A 32-bit integer uniquely identifying the area
1276             to  which  the  interface  connects.   Area  ID
1277             0.0.0.0 is used for the OSPFv3 backbone."
1278         DEFVAL          { '00000000'H } -- 0.0.0.0
1279         ::= { ospfv3IfEntry 2 }
1280
1281 ospfv3IfType OBJECT-TYPE
1282         SYNTAX          INTEGER {
1283                         broadcast(1),
1284                         nbma(2),
1285                         pointToPoint(3),
1286                         pointToMultipoint(5)
1287                         }
1288         MAX-ACCESS      read-create
1289         STATUS          current
1290         DESCRIPTION
1291             "The OSPFv3 interface type."
1292         ::= { ospfv3IfEntry 3 }
1293
1294 ospfv3IfAdminStat OBJECT-TYPE
1295         SYNTAX          Status
1296         MAX-ACCESS      read-create
1297         STATUS          current
1298         DESCRIPTION
1299             "The OSPFv3 interface's  administrative  status.
1300             The  value formed on the interface, and the in-
1301             terface will be advertised as an internal route
1302             to  some  area.   The  value 'disabled' denotes
1303             that the interface is external to OSPFv3."
1304         DEFVAL          { enabled }
1305         ::= { ospfv3IfEntry 4 }
1306
1307 ospfv3IfRtrPriority OBJECT-TYPE
1308         SYNTAX          DesignatedRouterPriority
1309         MAX-ACCESS      read-create
1310         STATUS          current
1311         DESCRIPTION
1312             "The  priority  of  this  interface.   Used  in
1313             multi-access  networks,  this  field is used in
1314             the designated router election algorithm.   The
1315             value 0 signifies that the router is not eligi-
1316             ble to become the  designated  router  on  this
1317             particular  network.   In the event of a tie in
1318             this value, routers will use their Router ID as
1319             a tie breaker."
1320         DEFVAL          { 1 }
1321         ::= { ospfv3IfEntry 5 }
1322
1323 ospfv3IfTransitDelay OBJECT-TYPE
1324         SYNTAX          UpToRefreshInterval
1325         UNITS           "seconds"
1326         MAX-ACCESS      read-create
1327         STATUS          current
1328         DESCRIPTION
1329             "The estimated number of seconds  it  takes  to
1330             transmit  a  link state update packet over this
1331             interface."
1332         DEFVAL          { 1 }
1333         ::= { ospfv3IfEntry 6 }
1334
1335 ospfv3IfRetransInterval OBJECT-TYPE
1336         SYNTAX          UpToRefreshInterval
1337         UNITS           "seconds"
1338         MAX-ACCESS      read-create
1339         STATUS          current
1340         DESCRIPTION
1341             "The number of seconds between  link-state  ad-
1342             vertisement  retransmissions,  for  adjacencies
1343             belonging to this  interface.   This  value  is
1344             also used when retransmitting database descrip-
1345             tion and link-state request packets."
1346         DEFVAL          { 5 }
1347         ::= { ospfv3IfEntry 7 }
1348
1349 ospfv3IfHelloInterval OBJECT-TYPE
1350         SYNTAX          HelloRange
1351         UNITS           "seconds"
1352         MAX-ACCESS      read-create
1353         STATUS          current
1354         DESCRIPTION
1355             "The length of time, in  seconds,  between  the
1356             Hello  packets that the router sends on the in-
1357             terface.  This value must be the same  for  all
1358             routers attached to a common network."
1359         DEFVAL          { 10 }
1360         ::= { ospfv3IfEntry 8 }
1361
1362 ospfv3IfRtrDeadInterval OBJECT-TYPE
1363         SYNTAX          RouterDeadRange
1364         UNITS           "seconds"
1365         MAX-ACCESS      read-create
1366         STATUS          current
1367         DESCRIPTION
1368             "The number of seconds that  a  router's  Hello
1369             packets  have  not been seen before it's neigh-
1370             bors declare the router down.  This  should  be
1371             some  multiple  of  the  Hello  interval.  This
1372             value must be the same for all routers attached
1373             to a common network."
1374         DEFVAL          { 40 }
1375         ::= { ospfv3IfEntry 9 }
1376
1377 ospfv3IfPollInterval OBJECT-TYPE
1378         SYNTAX          Unsigned32
1379         UNITS           "seconds"
1380         MAX-ACCESS      read-create
1381         STATUS          current
1382         DESCRIPTION
1383             "The larger time interval, in seconds,  between
1384             the  Hello  packets  sent  to  an inactive non-
1385             broadcast multi- access neighbor."
1386         DEFVAL          { 120 }
1387         ::= { ospfv3IfEntry 10 }
1388
1389 ospfv3IfState OBJECT-TYPE
1390         SYNTAX          INTEGER {
1391                         down(1),
1392                         loopback(2),
1393                         waiting(3),
1394                         pointToPoint(4),
1395                         designatedRouter(5),
1396                         backupDesignatedRouter(6),
1397                         otherDesignatedRouter(7)
1398                         }
1399         MAX-ACCESS      read-only
1400         STATUS          current
1401         DESCRIPTION
1402             "The OSPFv3 Interface State."
1403         ::= { ospfv3IfEntry 11 }
1404
1405 ospfv3IfDesignatedRouter OBJECT-TYPE
1406         SYNTAX          RouterID
1407         MAX-ACCESS      read-only
1408         STATUS          current
1409         DESCRIPTION
1410             "The Router ID of the Designated Router."
1411         ::= { ospfv3IfEntry 12 }
1412
1413 ospfv3IfBackupDesignatedRouter OBJECT-TYPE
1414         SYNTAX          RouterID
1415         MAX-ACCESS      read-only
1416         STATUS          current
1417         DESCRIPTION
1418             "The  Router ID of  the  Backup   Designated
1419             Router."
1420         ::= { ospfv3IfEntry 14 }
1421
1422 ospfv3IfEvents OBJECT-TYPE
1423         SYNTAX          Counter32
1424         MAX-ACCESS      read-only
1425         STATUS          current
1426         DESCRIPTION
1427             "The number of times this  OSPF  interface  has
1428             changed its state, or an error has occurred."
1429         ::= { ospfv3IfEntry 15 }
1430
1431  ospfv3IfStatus OBJECT-TYPE
1432         SYNTAX          RowStatus
1433         MAX-ACCESS      read-create
1434         STATUS          current
1435         DESCRIPTION
1436             "This variable controls the status of  the  en-
1437             try. The use of RowStatus is covered in more detail in
1438             [6]."
1439         ::= { ospfv3IfEntry 17 }
1440
1441 ospfv3IfMulticastForwarding OBJECT-TYPE
1442         SYNTAX          INTEGER {
1443                         blocked(1),   -- no multicast forwarding
1444                         multicast(2), -- using multicast address
1445                         unicast(3)    -- to each OSPFv3 neighbor
1446                         }
1447         MAX-ACCESS      read-create
1448         STATUS          current
1449         DESCRIPTION
1450             "The way multicasts should  forwarded  on  this
1451             interface;  not  forwarded,  forwarded  as data
1452             link multicasts, or forwarded as data link uni-
1453             casts.   Data link multicasting is not meaning-
1454             ful on point to point and NBMA interfaces,  and
1455             setting ospfv3MulticastForwarding to 0 effective-
1456             ly disables all multicast forwarding."
1457         DEFVAL { blocked }
1458         ::= { ospfv3IfEntry 18 }
1459
1460 ospfv3IfDemand OBJECT-TYPE
1461         SYNTAX          TruthValue
1462         MAX-ACCESS      read-create
1463         STATUS          current
1464         DESCRIPTION
1465             "Indicates whether Demand OSPFv3 procedures (hel-
1466             lo suppression to FULL neighbors and setting the
1467             DoNotAge flag on propagated LSAs) should be per-
1468             formed on this interface."
1469         DEFVAL { false }
1470         ::= { ospfv3IfEntry 19 }
1471
1472 ospfv3IfMetricValue OBJECT-TYPE
1473         SYNTAX          Metric
1474         MAX-ACCESS      read-create
1475         STATUS          current
1476         DESCRIPTION
1477             "The metric assigned to this interface.
1478              The default value of the Metric is
1479             Reference Bandwidth / ifSpeed. The value of the
1480             reference bandwidth is configured by the
1481             ospfv3ReferenceBandwidth object."
1482         ::= { ospfv3IfEntry 20 }
1483
1484  ospfv3IfLinkScopeLsaCount OBJECT-TYPE
1485         SYNTAX          Gauge32
1486         MAX-ACCESS      read-only
1487         STATUS          current
1488         DESCRIPTION
1489             "The total number of Link-Scope link-state
1490             advertisements in  this  link's link-state database."
1491         ::= { ospfv3IfEntry 21 }
1492
1493  ospfv3IfLinkLsaCksumSum OBJECT-TYPE
1494         SYNTAX          Integer32
1495         MAX-ACCESS      read-only
1496         STATUS          current
1497         DESCRIPTION
1498             "The 32-bit unsigned sum of the Link-Scope link-state
1499             advertisements'  LS  checksums  contained in this
1500             link's link-state database.  The sum can be used
1501             to determine if  there  has been  a  change  in a
1502             router's link state database, and to compare the
1503             link-state database of two routers."
1504         ::= { ospfv3IfEntry 22 }
1505
1506 ospfv3IfInstId OBJECT-TYPE
1507         SYNTAX          Integer32
1508         MAX-ACCESS      read-create
1509         STATUS          current
1510         DESCRIPTION
1511             "Enables multiple instances of OSPFv3 to be run over
1512             a single link. Each protocol instance would be assigned
1513             a separate ID. This ID has local link significance
1514             only."
1515         DEFVAL          { 0 }
1516         ::= { ospfv3IfEntry 23 }
1517
1518 ospfv3IfDemandNbrProbe OBJECT-TYPE
1519         SYNTAX          TruthValue
1520         MAX-ACCESS      read-create
1521         STATUS          current
1522         DESCRIPTION
1523                " Indicates whether or not neighbor probing is
1524                  enabled to determine whether or not the neighbor
1525                  is inactive. Neighbor probing is disabled by
1526                  default."
1527         DEFVAL { false }
1528         ::= { ospfv3IfEntry 24 }
1529
1530    ospfv3IfDemandNbrProbeRetxLimit OBJECT-TYPE
1531        SYNTAX       Unsigned32
1532        UNITS        "seconds"
1533        MAX-ACCESS   read-create
1534        STATUS       current
1535        DESCRIPTION
1536           " The number of consecutive LSA retransmissions before
1537             the neighbor is deemed inactive and the neighbor
1538             adjacency is brought down."
1539        DEFVAL          { 10 }
1540        ::= { ospfv3IfEntry 25 }
1541
1542
1543    ospfv3IfDemandNbrProbeInterval OBJECT-TYPE
1544        SYNTAX       Unsigned32
1545        UNITS        "seconds"
1546        MAX-ACCESS   read-create
1547        STATUS       current
1548        DESCRIPTION
1549           " Defines how often the neighbor will be probed."
1550        DEFVAL          { 120 }
1551        ::= { ospfv3IfEntry 26 }
1552
1553
1554 -- OSPFv3 Virtual Interface Table
1555
1556 -- The Virtual Interface Table describes the virtual
1557 -- links that the OSPFv3 Process is configured to
1558 -- carry on.
1559
1560 ospfv3VirtIfTable OBJECT-TYPE
1561         SYNTAX          SEQUENCE OF Ospfv3VirtIfEntry
1562         MAX-ACCESS      not-accessible
1563         STATUS          current
1564         DESCRIPTION
1565             "Information about this router's virtual inter-
1566             faces."
1567         REFERENCE
1568             "OSPF Version  2,  Appendix  C.4   Virtual  link
1569             parameters"
1570         ::= { ospfv3Objects 8 }
1571
1572 ospfv3VirtIfEntry OBJECT-TYPE
1573         SYNTAX          Ospfv3VirtIfEntry
1574         MAX-ACCESS      not-accessible
1575         STATUS          current
1576         DESCRIPTION
1577             "Information about a single Virtual Interface."
1578         INDEX           { ospfv3VirtIfAreaId,
1579                           ospfv3VirtIfNeighbor }
1580         ::= { ospfv3VirtIfTable 1 }
1581
1582 Ospfv3VirtIfEntry ::= SEQUENCE {
1583         ospfv3VirtIfAreaId
1584                 AreaID,
1585         ospfv3VirtIfNeighbor
1586                 RouterID,
1587         ospfv3VirtIfIndex
1588                 InterfaceIndex,
1589         ospfv3VirtIfTransitDelay
1590                 UpToRefreshInterval,
1591         ospfv3VirtIfRetransInterval
1592                 UpToRefreshInterval,
1593         ospfv3VirtIfHelloInterval
1594                 HelloRange,
1595         ospfv3VirtIfRtrDeadInterval
1596                  RouterDeadRange,
1597         ospfv3VirtIfState
1598                 INTEGER,
1599         ospfv3VirtIfEvents
1600                 Counter32,
1601         ospfv3VirtIfStatus
1602                 RowStatus,
1603         ospfv3VirtIfLinkScopeLsaCount
1604                 Gauge32,
1605         ospfv3VirtIfLinkLsaCksumSum
1606                    Integer32
1607         }
1608
1609 ospfv3VirtIfAreaId OBJECT-TYPE
1610         SYNTAX          AreaID
1611         MAX-ACCESS      read-only
1612         STATUS          current
1613         DESCRIPTION
1614             "The  Transit  Area  that  the   Virtual   Link
1615             traverses.  By definition, this is not 0.0.0.0"
1616         ::= { ospfv3VirtIfEntry 1 }
1617
1618 ospfv3VirtIfNeighbor OBJECT-TYPE
1619         SYNTAX          RouterID
1620         MAX-ACCESS      read-only
1621         STATUS          current
1622         DESCRIPTION
1623             "The Router ID of the Virtual Neighbor."
1624         ::= { ospfv3VirtIfEntry 2 }
1625
1626 ospfv3VirtIfIndex OBJECT-TYPE
1627         SYNTAX          InterfaceIndex
1628         MAX-ACCESS      read-create
1629         STATUS          current
1630         DESCRIPTION
1631             "The interface ID assigned to this OSPFv3 virtual
1632             interface. It is advertised in Hello's sent over
1633             the virtal link and in the router's router-LSAs."
1634         ::= { ospfv3VirtIfEntry 3 }
1635
1636 ospfv3VirtIfTransitDelay OBJECT-TYPE
1637         SYNTAX          UpToRefreshInterval
1638         UNITS           "seconds"
1639         MAX-ACCESS      read-create
1640         STATUS          current
1641         DESCRIPTION
1642             "The estimated number of seconds  it  takes  to
1643             transmit  a link- state update packet over this
1644             interface."
1645         DEFVAL          { 1 }
1646         ::= { ospfv3VirtIfEntry 4 }
1647
1648 ospfv3VirtIfRetransInterval OBJECT-TYPE
1649         SYNTAX          UpToRefreshInterval
1650         UNITS           "seconds"
1651         MAX-ACCESS      read-create
1652         STATUS          current
1653         DESCRIPTION
1654             "The number of seconds between  link-state  ad-
1655             vertisement  retransmissions,  for  adjacencies
1656             belonging to this  interface.   This  value  is
1657             also used when retransmitting database descrip-
1658             tion  and  link-state  request  packets.   This
1659             value  should  be well over the expected round-
1660             trip time."
1661         DEFVAL          { 5 }
1662         ::= { ospfv3VirtIfEntry 5 }
1663
1664 ospfv3VirtIfHelloInterval OBJECT-TYPE
1665         SYNTAX          HelloRange
1666         UNITS           "seconds"
1667         MAX-ACCESS      read-create
1668         STATUS          current
1669         DESCRIPTION
1670             "The length of time, in  seconds,  between  the
1671             Hello  packets that the router sends on the in-
1672             terface.  This value must be the same  for  the
1673             virtual neighbor."
1674         DEFVAL          { 10 }
1675         ::= { ospfv3VirtIfEntry 6 }
1676
1677 ospfv3VirtIfRtrDeadInterval OBJECT-TYPE
1678         SYNTAX          RouterDeadRange
1679         UNITS           "seconds"
1680         MAX-ACCESS      read-create
1681         STATUS          current
1682         DESCRIPTION
1683             "The number of seconds that  a  router's  Hello
1684             packets  have  not been seen before it's neigh-
1685             bors declare the router down.  This  should  be
1686             some  multiple  of  the  Hello  interval.  This
1687             value must be the same for the  virtual  neigh-
1688             bor."
1689         DEFVAL          { 60 }
1690         ::= { ospfv3VirtIfEntry 7 }
1691
1692 ospfv3VirtIfState OBJECT-TYPE
1693         SYNTAX          INTEGER {
1694                         down(1), -- these use the same encoding
1695                         pointToPoint(4) -- as the ospfv3IfTable
1696                         }
1697         MAX-ACCESS      read-only
1698         STATUS          current
1699         DESCRIPTION
1700             "OSPF virtual interface states."
1701         ::= { ospfv3VirtIfEntry 8 }
1702
1703 ospfv3VirtIfEvents OBJECT-TYPE
1704         SYNTAX          Counter32
1705         MAX-ACCESS      read-only
1706         STATUS          current
1707         DESCRIPTION
1708             "The number of state changes or error events on
1709             this Virtual Link"
1710         ::= { ospfv3VirtIfEntry 9 }
1711
1712 ospfv3VirtIfStatus OBJECT-TYPE
1713         SYNTAX          RowStatus
1714         MAX-ACCESS      read-create
1715         STATUS          current
1716         DESCRIPTION
1717             "This variable controls the status of  the  en-
1718             try. The use of RowStatus is covered in more detail
1719             in [6]."
1720         ::= { ospfv3VirtIfEntry 10 }
1721
1722 ospfv3VirtIfLinkScopeLsaCount OBJECT-TYPE
1723         SYNTAX          Gauge32
1724         MAX-ACCESS      read-only
1725         STATUS          current
1726         DESCRIPTION
1727             "The total number of Link-Scope link-state
1728             advertisements in  this  virtual link's link-state
1729             database."
1730         ::= { ospfv3VirtIfEntry 11 }
1731
1732 ospfv3VirtIfLinkLsaCksumSum OBJECT-TYPE
1733         SYNTAX          Integer32
1734         MAX-ACCESS      read-only
1735         STATUS          current
1736         DESCRIPTION
1737             "The 32-bit unsigned sum of the Link-Scope link-state
1738             advertisements'  LS  checksums  contained in this
1739             virtual link's link-state database.  The sum can be used
1740             to determine if  there  has been  a  change  in a
1741             router's link state database, and to compare the
1742             link-state database of two routers."
1743         ::= { ospfv3VirtIfEntry 12 }
1744
1745
1746 -- OSPFv3 Neighbor Table
1747
1748 -- The OSPFv3 Neighbor Table describes all neighbors in
1749 -- the locality of the subject router.
1750
1751 ospfv3NbrTable OBJECT-TYPE
1752         SYNTAX          SEQUENCE OF Ospfv3NbrEntry
1753         MAX-ACCESS      not-accessible
1754         STATUS          current
1755         DESCRIPTION
1756             "A table of non-virtual neighbor information."
1757         REFERENCE
1758             "OSPF Version 2, Section 10  The  Neighbor  Data
1759             Structure"
1760         ::= { ospfv3Objects 9 }
1761
1762 ospfv3NbrEntry OBJECT-TYPE
1763         SYNTAX          Ospfv3NbrEntry
1764         MAX-ACCESS      not-accessible
1765         STATUS          current
1766         DESCRIPTION
1767             "The information regarding a single neighbor."
1768         REFERENCE
1769             "OSPF Version 2, Section 10  The  Neighbor  Data
1770             Structure"
1771         INDEX           { ospfv3NbrIfIndex,
1772                           ospfv3NbrRtrId }
1773         ::= { ospfv3NbrTable 1 }
1774
1775 Ospfv3NbrEntry ::= SEQUENCE {
1776         ospfv3NbrIfIndex
1777                 InterfaceIndex,
1778         ospfv3NbrRtrId
1779                 RouterID,
1780         ospfv3NbrAddressType
1781                 InetAddressType,
1782         ospfv3NbrAddress
1783                 InetAddress,
1784         ospfv3NbrOptions
1785                 Integer32,
1786         ospfv3NbrPriority
1787                 DesignatedRouterPriority,
1788         ospfv3NbrState
1789                 INTEGER,
1790         ospfv3NbrEvents
1791                 Counter32,
1792         ospfv3NbrLsRetransQLen
1793                 Gauge32,
1794         ospfv3NbrHelloSuppressed
1795                 TruthValue,
1796         ospfv3NbrIfId
1797                 InterfaceIndex,
1798         ospfv3NbrRestartHelperStatus
1799                 INTEGER,
1800         ospfv3NbrRestartHelperAge
1801                 UpToRefreshInterval,
1802         ospfv3NbrRestartHelperExitReason
1803                 INTEGER
1804         }
1805
1806 ospfv3NbrIfIndex OBJECT-TYPE
1807         SYNTAX          InterfaceIndex
1808         MAX-ACCESS      read-only
1809         STATUS          current
1810         DESCRIPTION
1811             "The local link ID of the link over which the
1812              neighbor can be reached."
1813         ::= { ospfv3NbrEntry 1 }
1814
1815 ospfv3NbrRtrId OBJECT-TYPE
1816         SYNTAX          RouterID
1817         MAX-ACCESS      read-only
1818         STATUS          current
1819         DESCRIPTION
1820             "A 32-bit integer (represented as a type  IpAd-
1821             dress)  uniquely  identifying  the  neighboring
1822             router in the Autonomous System."
1823         ::= { ospfv3NbrEntry 2 }
1824
1825 ospfv3NbrAddressType OBJECT-TYPE
1826         SYNTAX          InetAddressType
1827         MAX-ACCESS      read-only
1828         STATUS          current
1829         DESCRIPTION
1830             "The address type of ospfv3NbrAddress. Only IPv6
1831             addresses without zone index are expected."
1832         ::= { ospfv3NbrEntry 3 }
1833
1834 ospfv3NbrAddress OBJECT-TYPE
1835         SYNTAX          InetAddress (SIZE (16))
1836         MAX-ACCESS      read-only
1837         STATUS          current
1838         DESCRIPTION
1839             "The IPv6 address of the neighbor associated with
1840             the local link."
1841         ::= { ospfv3NbrEntry 4 }
1842
1843 ospfv3NbrOptions OBJECT-TYPE
1844         SYNTAX          Integer32
1845         MAX-ACCESS      read-only
1846         STATUS          current
1847         DESCRIPTION
1848             "A Bit Mask corresponding to the neighbor's op-
1849             tions field."
1850         REFERENCE
1851             "OSPF Version 3, Appendix A.2 the Options field"
1852         ::= { ospfv3NbrEntry 5 }
1853
1854 ospfv3NbrPriority OBJECT-TYPE
1855         SYNTAX          DesignatedRouterPriority
1856         MAX-ACCESS      read-only
1857         STATUS          current
1858         DESCRIPTION
1859             "The priority of this neighbor in the designat-
1860             ed router election algorithm.  The value 0 sig-
1861             nifies that the neighbor is not eligible to be-
1862             come  the  designated router on this particular
1863             network."
1864         ::= { ospfv3NbrEntry 6 }
1865
1866 ospfv3NbrState OBJECT-TYPE
1867         SYNTAX          INTEGER {
1868                         down(1),
1869                         attempt(2),
1870                         init(3),
1871                         twoWay(4),
1872                         exchangeStart(5),
1873                         exchange(6),
1874                         loading(7),
1875                         full(8)
1876                         }
1877         MAX-ACCESS      read-only
1878         STATUS          current
1879         DESCRIPTION
1880             "The State of the relationship with this Neigh-
1881             bor."
1882         REFERENCE
1883             "OSPF Version 2, Section 10.1 Neighbor States"
1884         ::= { ospfv3NbrEntry 7 }
1885
1886 ospfv3NbrEvents OBJECT-TYPE
1887         SYNTAX          Counter32
1888         MAX-ACCESS      read-only
1889         STATUS          current
1890         DESCRIPTION
1891             "The number of times this neighbor relationship
1892             has changed state, or an error has occurred."
1893         ::= { ospfv3NbrEntry 8 }
1894
1895 ospfv3NbrLsRetransQLen OBJECT-TYPE
1896         SYNTAX          Gauge32
1897         MAX-ACCESS      read-only
1898         STATUS          current
1899         DESCRIPTION
1900             "The  current  length  of  the   retransmission
1901             queue."
1902         ::= { ospfv3NbrEntry 9 }
1903
1904 ospfv3NbrHelloSuppressed OBJECT-TYPE
1905         SYNTAX          TruthValue
1906         MAX-ACCESS      read-only
1907         STATUS          current
1908         DESCRIPTION
1909             "Indicates whether Hellos are being  suppressed
1910             to the neighbor"
1911         ::= { ospfv3NbrEntry 10 }
1912
1913 ospfv3NbrIfId OBJECT-TYPE
1914         SYNTAX          InterfaceIndex
1915         MAX-ACCESS      read-only
1916         STATUS          current
1917         DESCRIPTION
1918             "The interface ID that the neighbor advertises
1919             in its Hello Packets on this link, that is, the
1920             neighbor's local interface index."
1921         ::= { ospfv3NbrEntry 11 }
1922
1923 ospfv3NbrRestartHelperStatus OBJECT-TYPE
1924        SYNTAX       INTEGER { notHelping (1),
1925                               helping (2)
1926                             }
1927        MAX-ACCESS   read-only
1928        STATUS       current
1929        DESCRIPTION
1930           "Indicates whether the router is acting
1931           as a hitless restart helper for the neighbor."
1932           ::= { ospfv3NbrEntry 12 }
1933
1934 ospfv3NbrRestartHelperAge OBJECT-TYPE
1935        SYNTAX       UpToRefreshInterval
1936        UNITS        "seconds"
1937        MAX-ACCESS   read-only
1938        STATUS       current
1939        DESCRIPTION
1940           "Remaining time in current OSPF hitless restart
1941           interval, if the router is acting as a restart
1942           helper for the neighbor."
1943        ::= { ospfv3NbrEntry 13 }
1944
1945 ospfv3NbrRestartHelperExitReason OBJECT-TYPE
1946        SYNTAX       INTEGER { none (1),           -- not attempted
1947                               inProgress (2),     -- restart in
1948                                                   -- progress
1949                               completed (3),      -- successfully
1950                                                   -- completed
1951                               timedOut (4),       -- timed out
1952                               topologyChanged (5) -- aborted due to
1953                                                   -- topology
1954                                                   -- change.
1955                             }
1956        MAX-ACCESS   read-only
1957        STATUS       current
1958        DESCRIPTION
1959           "Describes the outcome of the last attempt at acting
1960            as a hitless restart helper for the neighbor."
1961     ::= { ospfv3NbrEntry 14 }
1962
1963
1964 -- OSPFv3 NBMA Neighbor Table
1965
1966 -- The OSPFv3 NBMA Neighbor Table describes all configured
1967 -- NBMA neighbors and neighbors dynamically discovered by
1968 -- lower-level protocols such as Inverse Neighbor Discovery.
1969
1970 ospfv3NbmaNbrTable OBJECT-TYPE
1971         SYNTAX          SEQUENCE OF Ospfv3NbmaNbrEntry
1972         MAX-ACCESS      not-accessible
1973         STATUS          current
1974         DESCRIPTION
1975             "A table of configured non-virtual neighbor
1976             information and neighbors dynamically discovered
1977             by lower-level protocols such as Inverse Neighbor
1978             Discovery."
1979         REFERENCE
1980             "OSPF Version 2, Section 10  The  Neighbor  Data
1981             Structure"
1982         ::= { ospfv3Objects 10 }
1983
1984 ospfv3NbmaNbrEntry OBJECT-TYPE
1985         SYNTAX          Ospfv3NbmaNbrEntry
1986         MAX-ACCESS      not-accessible
1987         STATUS          current
1988         DESCRIPTION
1989             "The information regarding a single configured
1990             neighbor or neighbor discovered by lower-level
1991             protocols such as Inverse Neighbor Discovery."
1992         REFERENCE
1993             "OSPF Version 2, Section 10  The  Neighbor  Data
1994             Structure"
1995         INDEX           { ospfv3NbmaNbrIfIndex,
1996                           ospfv3NbmaNbrAddressType,
1997                           ospfv3NbmaNbrAddress }
1998         ::= { ospfv3NbmaNbrTable 1 }
1999
2000 Ospfv3NbmaNbrEntry ::= SEQUENCE {
2001         ospfv3NbmaNbrIfIndex
2002                 InterfaceIndex,
2003         ospfv3NbmaNbrAddressType
2004                 InetAddressType,
2005         ospfv3NbmaNbrAddress
2006                 InetAddress,
2007         ospfv3NbmaNbrPriority
2008                 DesignatedRouterPriority,
2009         ospfv3NbmaNbrRtrId
2010                 RouterID,
2011         ospfv3NbmaNbrState
2012                 INTEGER,
2013         ospfv3NbmaNbrStorageType
2014                 StorageType,
2015         ospfv3NbmaNbrStatus
2016                 RowStatus
2017         }
2018
2019 ospfv3NbmaNbrIfIndex OBJECT-TYPE
2020         SYNTAX          InterfaceIndex
2021         MAX-ACCESS      read-only
2022         STATUS          current
2023         DESCRIPTION
2024             "The local link ID of the link over which the
2025              neighbor can be reached."
2026         ::= { ospfv3NbmaNbrEntry 1 }
2027
2028 ospfv3NbmaNbrAddressType OBJECT-TYPE
2029         SYNTAX          InetAddressType
2030         MAX-ACCESS      read-only
2031         STATUS          current
2032         DESCRIPTION
2033             "The address type of ospfv3NbrAddress. Only IPv6
2034             addresses without zone index are expected."
2035         ::= { ospfv3NbmaNbrEntry 2 }
2036
2037 ospfv3NbmaNbrAddress OBJECT-TYPE
2038         SYNTAX          InetAddress (SIZE (16))
2039         MAX-ACCESS      read-only
2040         STATUS          current
2041         DESCRIPTION
2042             "The IPv6 address of the neighbor associated with
2043             the local link."
2044         ::= { ospfv3NbmaNbrEntry 3 }
2045
2046 ospfv3NbmaNbrPriority OBJECT-TYPE
2047         SYNTAX          DesignatedRouterPriority
2048         MAX-ACCESS      read-create
2049         STATUS          current
2050         DESCRIPTION
2051             "The priority of this neighbor in the designat-
2052             ed router election algorithm. The value 0 sig-
2053             nifies that the neighbor is not eligible to be-
2054             come  the  designated router on this particular
2055             network."
2056         DEFVAL          { 1 }
2057         ::= { ospfv3NbmaNbrEntry 4 }
2058
2059 ospfv3NbmaNbrRtrId OBJECT-TYPE
2060         SYNTAX          RouterID
2061         MAX-ACCESS      read-only
2062         STATUS          current
2063         DESCRIPTION
2064             "A 32-bit integer (represented as a type IpAd-
2065             dress) uniquely identifying the neighboring
2066             router in the Autonomous System. A value of
2067             0.0.0.0 is returned until a Hello is received
2068             from the configured neighbor."
2069         ::= { ospfv3NbmaNbrEntry 5 }
2070
2071 ospfv3NbmaNbrState OBJECT-TYPE
2072         SYNTAX          INTEGER {
2073                         down(1),
2074                         attempt(2),
2075                         init(3),
2076                         twoWay(4),
2077                         exchangeStart(5),
2078                         exchange(6),
2079                         loading(7),
2080                         full(8)
2081                         }
2082         MAX-ACCESS      read-only
2083         STATUS          current
2084         DESCRIPTION
2085             "The State of the relationship with this Neigh-
2086             bor."
2087         REFERENCE
2088             "OSPF Version 2, Section 10.1 Neighbor States"
2089         ::= { ospfv3NbmaNbrEntry 6 }
2090
2091 ospfv3NbmaNbrStorageType OBJECT-TYPE
2092         SYNTAX          StorageType
2093         MAX-ACCESS      read-create
2094         STATUS          current
2095         DESCRIPTION
2096             "The storage type for this conceptual row.
2097             Conceptual rows having the value 'permanent' need not
2098             allow write-access to any columnar objects in the row.
2099             Manually configured entries will have a storage type
2100             of nonVolatile while entries dynamically created as a
2101             result of a lower-level protocol such as Inverse
2102             Neighbor Discovery will have a storage type of
2103             volatile."
2104         DEFVAL          { nonVolatile }
2105         ::= { ospfv3NbmaNbrEntry 7 }
2106
2107 ospfv3NbmaNbrStatus OBJECT-TYPE
2108         SYNTAX          RowStatus
2109         MAX-ACCESS      read-create
2110         STATUS          current
2111         DESCRIPTION
2112             "This variable controls the status of the en-
2113             try. The use of RowStatus is covered in more detail
2114             in [6]."
2115         ::= { ospfv3NbmaNbrEntry 8 }
2116
2117 -- OSPFv3 Virtual Neighbor Table
2118
2119 -- This table describes all virtual neighbors.
2120 -- Since Virtual Links are configured in the
2121 -- virtual interface table, this table is read-only.
2122
2123 ospfv3VirtNbrTable OBJECT-TYPE
2124         SYNTAX          SEQUENCE OF Ospfv3VirtNbrEntry
2125         MAX-ACCESS      not-accessible
2126         STATUS          current
2127         DESCRIPTION
2128             "A table of virtual neighbor information."
2129         REFERENCE
2130             "OSPF Version 2, Section 15 Virtual Links"
2131         ::= { ospfv3Objects 11 }
2132
2133 ospfv3VirtNbrEntry OBJECT-TYPE
2134         SYNTAX          Ospfv3VirtNbrEntry
2135         MAX-ACCESS      not-accessible
2136         STATUS          current
2137         DESCRIPTION
2138             "Virtual neighbor information."
2139         INDEX           { ospfv3VirtNbrArea,
2140                           ospfv3VirtNbrRtrId }
2141         ::= { ospfv3VirtNbrTable 1 }
2142
2143 Ospfv3VirtNbrEntry ::= SEQUENCE {
2144         ospfv3VirtNbrArea
2145                 AreaID,
2146         ospfv3VirtNbrRtrId
2147                 RouterID,
2148         ospfv3VirtNbrIfIndex
2149                 InterfaceIndex,
2150         ospfv3VirtNbrAddressType
2151                 InetAddressType,
2152         ospfv3VirtNbrAddress
2153                 InetAddress,
2154         ospfv3VirtNbrOptions
2155                 Integer32,
2156         ospfv3VirtNbrState
2157                 INTEGER,
2158         ospfv3VirtNbrEvents
2159                 Counter32,
2160         ospfv3VirtNbrLsRetransQLen
2161                 Gauge32,
2162         ospfv3VirtNbrHelloSuppressed
2163                 TruthValue,
2164         ospfv3VirtNbrIfId
2165                 InterfaceIndex,
2166         ospfv3VirtNbrRestartHelperStatus
2167                 INTEGER,
2168         ospfv3VirtNbrRestartHelperAge
2169                 UpToRefreshInterval,
2170         ospfv3VirtNbrRestartHelperExitReason
2171                 INTEGER
2172         }
2173
2174 ospfv3VirtNbrArea OBJECT-TYPE
2175         SYNTAX          AreaID
2176         MAX-ACCESS      read-only
2177         STATUS          current
2178         DESCRIPTION
2179             "The Transit Area Identifier."
2180         ::= { ospfv3VirtNbrEntry 1 }
2181
2182 ospfv3VirtNbrRtrId OBJECT-TYPE
2183         SYNTAX          RouterID
2184         MAX-ACCESS      read-only
2185         STATUS          current
2186         DESCRIPTION
2187             "A  32-bit  integer  uniquely  identifying  the
2188             neighboring router in the Autonomous System."
2189         ::= { ospfv3VirtNbrEntry 2 }
2190
2191 ospfv3VirtNbrIfIndex OBJECT-TYPE
2192         SYNTAX          InterfaceIndex
2193         MAX-ACCESS      read-only
2194         STATUS          current
2195         DESCRIPTION
2196             "The local interface ID for the virtual link over
2197             which the neighbor can be reached."
2198         ::= { ospfv3VirtNbrEntry 3 }
2199
2200 ospfv3VirtNbrAddressType OBJECT-TYPE
2201         SYNTAX          InetAddressType
2202         MAX-ACCESS      read-only
2203         STATUS          current
2204         DESCRIPTION
2205             "The address type of ospfv3VirtNbrAddress. Only IPv6
2206             addresses without zone index are expected."
2207         ::= { ospfv3VirtNbrEntry 4 }
2208
2209 ospfv3VirtNbrAddress OBJECT-TYPE
2210         SYNTAX          InetAddress (SIZE (16))
2211         MAX-ACCESS      read-only
2212         STATUS          current
2213         DESCRIPTION
2214             "The IPv6 address advertised by this Virtual Neighbor.
2215             It must be a Site-Local or Global scope address."
2216         ::= { ospfv3VirtNbrEntry 5 }
2217
2218 ospfv3VirtNbrOptions OBJECT-TYPE
2219         SYNTAX          Integer32
2220         MAX-ACCESS      read-only
2221         STATUS          current
2222         DESCRIPTION
2223             "A Bit Mask corresponding to the neighbor's op-
2224             tions field."
2225         REFERENCE
2226             "OSPF Version 3, Appendix A.2 the Options field"
2227         ::= { ospfv3VirtNbrEntry 6 }
2228
2229 ospfv3VirtNbrState OBJECT-TYPE
2230         SYNTAX          INTEGER {
2231                         down(1),
2232                         attempt(2),
2233                         init(3),
2234                         twoWay(4),
2235                         exchangeStart(5),
2236                         exchange(6),
2237                         loading(7),
2238                         full(8)
2239                         }
2240         MAX-ACCESS      read-only
2241         STATUS          current
2242         DESCRIPTION
2243             "The state of the Virtual Neighbor Relation-
2244             ship."
2245         ::= { ospfv3VirtNbrEntry 7 }
2246
2247 ospfv3VirtNbrEvents OBJECT-TYPE
2248         SYNTAX          Counter32
2249         MAX-ACCESS      read-only
2250         STATUS          current
2251         DESCRIPTION
2252             "The number of  times  this  virtual  link  has
2253             changed its state, or an error has occurred."
2254         ::= { ospfv3VirtNbrEntry 8 }
2255
2256 ospfv3VirtNbrLsRetransQLen OBJECT-TYPE
2257         SYNTAX          Gauge32
2258         MAX-ACCESS      read-only
2259         STATUS          current
2260         DESCRIPTION
2261             "The  current  length  of  the   retransmission
2262             queue."
2263         ::= { ospfv3VirtNbrEntry 9 }
2264
2265 ospfv3VirtNbrHelloSuppressed OBJECT-TYPE
2266         SYNTAX          TruthValue
2267         MAX-ACCESS      read-only
2268         STATUS          current
2269         DESCRIPTION
2270             "Indicates whether Hellos are being  suppressed
2271             to the neighbor"
2272         ::= { ospfv3VirtNbrEntry 10 }
2273
2274 ospfv3VirtNbrIfId OBJECT-TYPE
2275         SYNTAX          InterfaceIndex
2276         MAX-ACCESS      read-only
2277         STATUS          current
2278         DESCRIPTION
2279             "The interface ID that the neighbor advertises
2280             in its Hello Packets on this virtual link, that is,
2281             the neighbor's local interface ID."
2282         ::= { ospfv3VirtNbrEntry 11 }
2283
2284    ospfv3VirtNbrRestartHelperStatus OBJECT-TYPE
2285        SYNTAX       INTEGER { notHelping (1),
2286                               helping (2)
2287                             }
2288        MAX-ACCESS   read-only
2289        STATUS       current
2290        DESCRIPTION
2291           "Indicates whether the router is acting
2292           as a hitless restart helper for the neighbor."
2293           ::= { ospfv3VirtNbrEntry 12 }
2294
2295 ospfv3VirtNbrRestartHelperAge OBJECT-TYPE
2296        SYNTAX       UpToRefreshInterval
2297        UNITS        "seconds"
2298        MAX-ACCESS   read-only
2299        STATUS       current
2300        DESCRIPTION
2301           "Remaining time in current OSPF hitless restart
2302           interval, if the router is acting as a restart
2303           helper for the neighbor."
2304        ::= { ospfv3VirtNbrEntry 13 }
2305
2306 ospfv3VirtNbrRestartHelperExitReason OBJECT-TYPE
2307        SYNTAX       INTEGER { none (1),           -- not attempted
2308                               inProgress (2),     -- restart in
2309                                                   -- progress
2310                               completed (3),      -- successfully
2311                                                   -- completed
2312                               timedOut (4),       -- timed out
2313                               topologyChanged (5) -- aborted due to
2314                                                   -- topology
2315                                                   -- change.
2316                             }
2317        MAX-ACCESS   read-only
2318        STATUS       current
2319        DESCRIPTION
2320           "Describes the outcome of the last attempt at acting
2321            as a hitless restart helper for the neighbor."
2322     ::= { ospfv3VirtNbrEntry 14 }
2323
2324
2325 --
2326 -- The OSPFv3 Area Aggregate Table
2327 --
2328
2329 ospfv3AreaAggregateTable OBJECT-TYPE
2330         SYNTAX          SEQUENCE OF Ospfv3AreaAggregateEntry
2331         MAX-ACCESS      not-accessible
2332         STATUS          current
2333         DESCRIPTION
2334             "A range of IPv6 prefixes specified by a
2335             prefix/prefix length  pair. Note that if
2336             ranges are configured such that one range sub-
2337             sumes  another range the most specific match is
2338             the preferred one."
2339         ::= { ospfv3Objects 12 }
2340
2341 ospfv3AreaAggregateEntry OBJECT-TYPE
2342         SYNTAX          Ospfv3AreaAggregateEntry
2343         MAX-ACCESS      not-accessible
2344         STATUS          current
2345         DESCRIPTION
2346             "A range of IPv6 prefixes specified by a
2347             prefix/prefix length  pair. Note that if
2348             ranges are configured such that one range sub-
2349             sumes  another range the most specific match is
2350             the preferred one."
2351         REFERENCE
2352             "OSPF Version 2, Appendix C.2  Area parameters"
2353         INDEX           { ospfv3AreaAggregateAreaID,
2354                           ospfv3AreaAggregateAreaLsdbType,
2355                           ospfv3AreaAggregatePrefixType,
2356                           ospfv3AreaAggregatePrefix,
2357                           ospfv3AreaAggregatePrefixLength }
2358         ::= { ospfv3AreaAggregateTable 1 }
2359
2360 Ospfv3AreaAggregateEntry ::= SEQUENCE {
2361         ospfv3AreaAggregateAreaID
2362                 AreaID,
2363         ospfv3AreaAggregateAreaLsdbType
2364                 INTEGER,
2365         ospfv3AreaAggregatePrefixType
2366                 InetAddressType,
2367         ospfv3AreaAggregatePrefix
2368                 InetAddress,
2369         ospfv3AreaAggregatePrefixLength
2370                 InetAddressPrefixLength,
2371         ospfv3AreaAggregateStatus
2372                 RowStatus,
2373         ospfv3AreaAggregateEffect
2374                 INTEGER,
2375         ospfv3AreaAggregateRouteTag
2376                 INTEGER
2377         }
2378
2379 ospfv3AreaAggregateAreaID OBJECT-TYPE
2380         SYNTAX          AreaID
2381         MAX-ACCESS      read-only
2382         STATUS          current
2383         DESCRIPTION
2384             "The Area the Address Aggregate is to be  found
2385             within."
2386         REFERENCE
2387             "OSPF Version 2, Appendix C.2 Area parameters"
2388         ::= { ospfv3AreaAggregateEntry 1 }
2389
2390 ospfv3AreaAggregateAreaLsdbType OBJECT-TYPE
2391         SYNTAX          INTEGER {
2392                         interAreaPrefixLsa(8195), -- 0x2003
2393                         nssaExternalLsa(8199)     -- 0x2007
2394                         }
2395         MAX-ACCESS      read-only
2396         STATUS          current
2397         DESCRIPTION
2398             "The type of the Address Aggregate.  This field
2399             specifies  the  Area Lsdb type that this Address Ag-
2400             gregate applies to."
2401         REFERENCE
2402             "OSPF Version 2, Appendix A.4.1 The  Link  State
2403             Advertisement header"
2404         ::= { ospfv3AreaAggregateEntry 2 }
2405
2406 ospfv3AreaAggregatePrefixType OBJECT-TYPE
2407         SYNTAX          InetAddressType
2408         MAX-ACCESS      read-only
2409         STATUS          current
2410         DESCRIPTION
2411             "The prefix type of ospfv3AreaAggregatePrefix. Only
2412             IPv6 addresses are expected."
2413         ::= { ospfv3AreaAggregateEntry 4 }
2414
2415 ospfv3AreaAggregatePrefix OBJECT-TYPE
2416         SYNTAX          InetAddress (SIZE (0..16))
2417         MAX-ACCESS      read-only
2418         STATUS          current
2419         DESCRIPTION
2420             "The IPv6 Prefix."
2421         REFERENCE
2422             "OSPF Version 2, Appendix C.2 Area parameters"
2423         ::= { ospfv3AreaAggregateEntry 5 }
2424
2425 ospfv3AreaAggregatePrefixLength OBJECT-TYPE
2426         SYNTAX          InetAddressPrefixLength (3..128)
2427         UNITS           "bits"
2428         MAX-ACCESS      read-only
2429         STATUS          current
2430         DESCRIPTION
2431             "The length of the prefix (in bits). A prefix can
2432             not be shorter than 3 bits."
2433         REFERENCE
2434             "OSPF Version 2, Appendix C.2 Area parameters"
2435         ::= { ospfv3AreaAggregateEntry 6 }
2436
2437 ospfv3AreaAggregateStatus OBJECT-TYPE
2438         SYNTAX          RowStatus
2439         MAX-ACCESS      read-create
2440         STATUS          current
2441         DESCRIPTION
2442             "This variable controls the status of  the  en-
2443             try. The use of RowStatus is covered in more detail
2444             in [6]."
2445         ::= { ospfv3AreaAggregateEntry 7 }
2446
2447 ospfv3AreaAggregateEffect OBJECT-TYPE
2448         SYNTAX          INTEGER {
2449                         advertiseMatching(1),
2450                         doNotAdvertiseMatching(2)
2451                         }
2452         MAX-ACCESS      read-create
2453         STATUS          current
2454         DESCRIPTION
2455             "Prefixes subsumed by ranges either trigger  the
2456             advertisement  of  the indicated aggregate (ad-
2457             vertiseMatching), or result in the prefix not
2458             being advertised at all outside the area."
2459         DEFVAL          { advertiseMatching }
2460         ::= { ospfv3AreaAggregateEntry 8 }
2461
2462 ospfv3AreaAggregateRouteTag OBJECT-TYPE
2463         SYNTAX          Integer32
2464         MAX-ACCESS      read-create
2465         STATUS          current
2466         DESCRIPTION
2467             "This tag is advertised only in the summarized
2468              As-External LSA when summarizing from type-7 to
2469              type-5."
2470         DEFVAL         { 0 }
2471         ::= { ospfv3AreaAggregateEntry 9 }
2472
2473
2474 -- conformance information
2475
2476 ospfv3Groups      OBJECT IDENTIFIER ::= { ospfv3Conformance 1 }
2477 ospfv3Compliances OBJECT IDENTIFIER ::= { ospfv3Conformance 2 }
2478
2479 -- compliance statements
2480
2481 ospfv3Compliance MODULE-COMPLIANCE
2482         STATUS          current
2483         DESCRIPTION     "The compliance statement "
2484         MODULE          -- this module
2485         MANDATORY-GROUPS {
2486                         ospfv3BasicGroup,
2487                         ospfv3AreaGroup,
2488                         ospfv3IfGroup,
2489                         ospfv3VirtIfGroup,
2490                         ospfv3NbrGroup,
2491                         ospfv3NbmaNbrGroup,
2492                         ospfv3VirtNbrGroup,
2493                         ospfv3AreaAggregateGroup
2494                         }
2495
2496         GROUP           ospfv3AsLsdbGroup
2497         DESCRIPTION
2498             "This group is required for OSPFv3 systems that
2499             display their AS-scope link state database."
2500
2501         GROUP           ospfv3AreaLsdbGroup
2502         DESCRIPTION
2503             "This group is required for OSPFv3 systems that
2504             display their Area-scope link state database."
2505
2506         GROUP           ospfv3LinkLsdbGroup
2507         DESCRIPTION
2508             "This group is required for OSPFv3 systems that
2509             display their Link-scope link state database."
2510
2511         GROUP           ospfv3HostGroup
2512         DESCRIPTION
2513             "This group is required for OSPFv3 systems that
2514             support attached hosts."
2515
2516         OBJECT          ospfv3NbrAddressType
2517         SYNTAX          InetAddressType { ipv6(2) }
2518         DESCRIPTION
2519             "An implementation is only required to support IPv6
2520             address without zone index."
2521
2522         OBJECT          ospfv3VirtNbrAddressType
2523         SYNTAX          InetAddressType { ipv6(2) }
2524         DESCRIPTION
2525             "An implementation is only required to support IPv6
2526             address without zone index."
2527
2528         ::= { ospfv3Compliances 1 }
2529
2530 -- units of conformance
2531
2532 ospfv3BasicGroup OBJECT-GROUP
2533         OBJECTS         {
2534                         ospfv3RouterId,
2535                         ospfv3AdminStat,
2536                         ospfv3VersionNumber,
2537                         ospfv3AreaBdrRtrStatus,
2538                         ospfv3ASBdrRtrStatus,
2539                         ospfv3AsScopeLsaCount,
2540                         ospfv3AsScopeLsaCksumSum,
2541                         ospfv3OriginateNewLsas,
2542                         ospfv3RxNewLsas,
2543                         ospfv3ExtLsaCount,
2544                         ospfv3ExtAreaLsdbLimit,
2545                         ospfv3MulticastExtensions,
2546                         ospfv3ExitOverflowInterval,
2547                         ospfv3DemandExtensions,
2548                         ospfv3TrafficEngineeringSupport,
2549                         ospfv3ReferenceBandwidth,
2550                         ospfv3RestartSupport,
2551                         ospfv3RestartInterval,
2552                         ospfv3RestartStatus,
2553                         ospfv3RestartAge,
2554                         ospfv3RestartExitReason
2555                         }
2556         STATUS          current
2557         DESCRIPTION
2558             "These objects are required for OSPFv3 systems."
2559         ::= { ospfv3Groups 1 }
2560
2561
2562 ospfv3AreaGroup OBJECT-GROUP
2563         OBJECTS         {
2564                         ospfv3ImportAsExtern,
2565                         ospfv3AreaSpfRuns,
2566                         ospfv3AreaBdrRtrCount,
2567                         ospfv3AreaAsBdrRtrCount,
2568                         ospfv3AreaScopeLsaCount,
2569                         ospfv3AreaScopeLsaCksumSum,
2570                         ospfv3AreaSummary,
2571                         ospfv3AreaStatus,
2572                         ospfv3StubMetric,
2573                         ospfv3AreaNssaTranslatorRole,
2574                         ospfv3AreaNssaTranslatorState,
2575                         ospfv3AreaNssaTranslatorStabilityInterval,
2576                         ospfv3AreaNssaTranslatorEvents,
2577                         ospfv3AreaStubMetricType
2578                         }
2579         STATUS          current
2580         DESCRIPTION
2581             "These objects are required for OSPFv3 systems
2582             supporting areas."
2583         ::= { ospfv3Groups 2 }
2584
2585 ospfv3AsLsdbGroup OBJECT-GROUP
2586         OBJECTS         {
2587                         ospfv3AsLsdbSequence,
2588                         ospfv3AsLsdbAge,
2589                         ospfv3AsLsdbChecksum,
2590                         ospfv3AsLsdbAdvertisement,
2591                         ospfv3AsLsdbTypeKnown
2592                         }
2593         STATUS          current
2594         DESCRIPTION
2595             "These objects are required for OSPFv3 systems
2596             that display their AS-scope link state database."
2597         ::= { ospfv3Groups 3 }
2598
2599 ospfv3AreaLsdbGroup OBJECT-GROUP
2600         OBJECTS         {
2601                         ospfv3AreaLsdbSequence,
2602                         ospfv3AreaLsdbAge,
2603                         ospfv3AreaLsdbChecksum,
2604                         ospfv3AreaLsdbAdvertisement,
2605                         ospfv3AreaLsdbTypeKnown
2606                         }
2607         STATUS          current
2608         DESCRIPTION
2609             "These objects are required for OSPFv3 systems
2610             that display their Area-scope link state database."
2611         ::= { ospfv3Groups 4 }
2612
2613 ospfv3LinkLsdbGroup OBJECT-GROUP
2614         OBJECTS         {
2615                         ospfv3LinkLsdbSequence,
2616                         ospfv3LinkLsdbAge,
2617                         ospfv3LinkLsdbChecksum,
2618                         ospfv3LinkLsdbAdvertisement,
2619                         ospfv3LinkLsdbTypeKnown
2620                         }
2621         STATUS          current
2622         DESCRIPTION
2623             "These objects are required for OSPFv3  systems
2624             that display their Link-scope link state database."
2625         ::= { ospfv3Groups 5 }
2626
2627 ospfv3HostGroup OBJECT-GROUP
2628         OBJECTS         {
2629                         ospfv3HostMetric,
2630                         ospfv3HostStatus,
2631                         ospfv3HostAreaID
2632                         }
2633         STATUS          current
2634         DESCRIPTION
2635             "These objects are required  for  OSPFv3  systems
2636             that support attached hosts."
2637         ::= { ospfv3Groups 6 }
2638
2639 ospfv3IfGroup OBJECT-GROUP
2640         OBJECTS         {
2641                         ospfv3IfAreaId,
2642                         ospfv3IfType,
2643                         ospfv3IfAdminStat,
2644                         ospfv3IfRtrPriority,
2645                         ospfv3IfTransitDelay,
2646                         ospfv3IfRetransInterval,
2647                         ospfv3IfHelloInterval,
2648                         ospfv3IfRtrDeadInterval,
2649                         ospfv3IfPollInterval,
2650                         ospfv3IfState,
2651                         ospfv3IfDesignatedRouter,
2652                         ospfv3IfBackupDesignatedRouter,
2653                         ospfv3IfEvents,
2654                         ospfv3IfStatus,
2655                         ospfv3IfMulticastForwarding,
2656                         ospfv3IfDemand,
2657                         ospfv3IfMetricValue,
2658                         ospfv3IfLinkScopeLsaCount,
2659                         ospfv3IfLinkLsaCksumSum,
2660                         ospfv3IfInstId,
2661                         ospfv3IfDemandNbrProbe,
2662                         ospfv3IfDemandNbrProbeRetxLimit,
2663                         ospfv3IfDemandNbrProbeInterval
2664                         }
2665         STATUS          current
2666         DESCRIPTION
2667             "These interface objects are required for
2668             OSPFv3 systems."
2669         ::= { ospfv3Groups 7 }
2670
2671 ospfv3VirtIfGroup OBJECT-GROUP
2672         OBJECTS         {
2673                         ospfv3VirtIfIndex,
2674                         ospfv3VirtIfTransitDelay,
2675                         ospfv3VirtIfRetransInterval,
2676                         ospfv3VirtIfHelloInterval,
2677                         ospfv3VirtIfRtrDeadInterval,
2678                         ospfv3VirtIfState,
2679                         ospfv3VirtIfEvents,
2680                         ospfv3VirtIfStatus,
2681                         ospfv3VirtIfLinkScopeLsaCount,
2682                         ospfv3VirtIfLinkLsaCksumSum
2683                         }
2684         STATUS          current
2685         DESCRIPTION
2686             "These virtual interface objects are required for
2687             OSPFv3 systems."
2688         ::= { ospfv3Groups 8 }
2689
2690 ospfv3NbrGroup OBJECT-GROUP
2691         OBJECTS         {
2692                         ospfv3NbrAddressType,
2693                         ospfv3NbrAddress,
2694                         ospfv3NbrOptions,
2695                         ospfv3NbrPriority,
2696                         ospfv3NbrState,
2697                         ospfv3NbrEvents,
2698                         ospfv3NbrLsRetransQLen,
2699                         ospfv3NbrHelloSuppressed,
2700                         ospfv3NbrIfId,
2701                         ospfv3NbrRestartHelperStatus,
2702                         ospfv3NbrRestartHelperAge,
2703                         ospfv3NbrRestartHelperExitReason
2704                         }
2705         STATUS          current
2706         DESCRIPTION
2707             "These neighbor objects are required for
2708             OSPFv3 systems."
2709         ::= { ospfv3Groups 9 }
2710
2711 ospfv3NbmaNbrGroup OBJECT-GROUP
2712         OBJECTS         {
2713                         ospfv3NbmaNbrPriority,
2714                         ospfv3NbmaNbrRtrId,
2715                         ospfv3NbmaNbrState,
2716                         ospfv3NbmaNbrStorageType,
2717                         ospfv3NbmaNbrStatus
2718                         }
2719         STATUS          current
2720         DESCRIPTION
2721             "These NBMA neighbor objects are required for
2722             OSPFv3 systems."
2723         ::= { ospfv3Groups 10 }
2724
2725 ospfv3VirtNbrGroup OBJECT-GROUP
2726         OBJECTS         {
2727                         ospfv3VirtNbrIfIndex,
2728                         ospfv3VirtNbrAddressType,
2729                         ospfv3VirtNbrAddress,
2730                         ospfv3VirtNbrOptions,
2731                         ospfv3VirtNbrState,
2732                         ospfv3VirtNbrEvents,
2733                         ospfv3VirtNbrLsRetransQLen,
2734                         ospfv3VirtNbrHelloSuppressed,
2735                         ospfv3VirtNbrIfId,
2736                         ospfv3VirtNbrRestartHelperStatus,
2737                         ospfv3VirtNbrRestartHelperAge,
2738                         ospfv3VirtNbrRestartHelperExitReason
2739                         }
2740         STATUS          current
2741         DESCRIPTION
2742             "These virtual neighbor objects are required for
2743             OSPFv3 systems."
2744         ::= { ospfv3Groups 11 }
2745
2746 ospfv3AreaAggregateGroup OBJECT-GROUP
2747         OBJECTS         {
2748                         ospfv3AreaAggregateStatus,
2749                         ospfv3AreaAggregateEffect,
2750                         ospfv3AreaAggregateRouteTag
2751                         }
2752         STATUS          current
2753         DESCRIPTION
2754             "These area aggregate objects are required for
2755             OSPFv3 systems."
2756         ::= { ospfv3Groups 12 }
2757
2758 END