firmware/export/config-c100.h

   1 /*
   2  * This config file is for the Sansa C100 series
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define MODEL_NAME "Sandisk Sansa c100 series"
   7
   8 /* For Rolo and bootloader */
   9 #define MODEL_NUMBER 30
  10
  11 /* define hardware samples rate caps mask */
  12 #define HW_SAMPR_CAPS   (/*SAMPR_CAP_88 | */SAMPR_CAP_44/* | SAMPR_CAP_22 | SAMPR_CAP_11*/)
  13
  14 /* define this if you have a bitmap LCD display */
  15 #define HAVE_LCD_BITMAP
  16
  17 /* define this if you have a colour LCD */
  18 #define HAVE_LCD_COLOR
  19
  20 /* define this if you can flip your LCD */
  21 /*#define HAVE_LCD_FLIP*/
  22
  23 /* define this if you can invert the colours on your LCD */
  24 /*#define HAVE_LCD_INVERT*/
  25
  26 /* define this if you have access to the quickscreen */
  27 #define HAVE_QUICKSCREEN
  28
  29 /* define this if you have access to the pitchscreen */
  30 #define HAVE_PITCHSCREEN
  31
  32 /* define this if you would like tagcache to build on this target */
  33 #define HAVE_TAGCACHE
  34
  35 /* define this if you have a flash memory storage */
  36 #define HAVE_FLASH_STORAGE
  37
  38 /* Only v1 */
  39 #define CONFIG_STORAGE STORAGE_NAND
  40 #define CONFIG_NAND NAND_TCC
  41
  42 /* c100's with direct-to-NAND access are FAT16 */
  43 #define HAVE_FAT16SUPPORT
  44
  45 /* LCD dimensions */
  46 #define LCD_WIDTH  128
  47 #define LCD_HEIGHT 64
  48 #define LCD_DEPTH  16   /* 65536 colours */
  49 #define LCD_PIXELFORMAT RGB565   /*rgb565*/
  50
  51 /*#define LCD_PIXELFORMAT VERTICAL_PACKING*/
  52
  53 /* define this to indicate your device's keypad */
  54 #define CONFIG_KEYPAD SANSA_C100_PAD
  55
  56 /* define this if you have a real-time clock */
  57 #define CONFIG_RTC RTC_TCC77X
  58
  59 /* define this if you have RTC RAM available for settings */
  60 //#define HAVE_RTC_RAM
  61
  62 /* Define this if you have a software controlled poweroff */
  63 #define HAVE_SW_POWEROFF
  64
  65 /* The number of bytes reserved for loadable codecs */
  66 #define CODEC_SIZE 0x50000
  67
  68 /* The number of bytes reserved for loadable plugins */
  69 #define PLUGIN_BUFFER_SIZE 0x50000
  70
  71 #define AB_REPEAT_ENABLE 1
  72
  73 /* Define this if you do software codec */
  74 #define CONFIG_CODEC SWCODEC
  75
  76 /* Define this if you have the TLV320 audio codec */
  77 #define HAVE_TLV320
  78
  79 /*#define CONFIG_TUNER TEA5767*/
  80
  81 /* TLV320 has no tone controls, so we use the software ones */
  82 #define HAVE_SW_TONE_CONTROLS
  83
  84 /* Define this for LCD backlight available */
  85 #define HAVE_BACKLIGHT
  86
  87 #define CONFIG_I2C I2C_TCC77X
  88
  89 #define BATTERY_CAPACITY_DEFAULT 540 /* default battery capacity */
  90 #define BATTERY_CAPACITY_MIN 540 /* min. capacity selectable */
  91 #define BATTERY_CAPACITY_MAX 540 /* max. capacity selectable */
  92 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
  93 #define BATTERY_TYPES_COUNT  1    /* only one type */
  94
  95 /* define this if the unit should not shut down on low battery. */
  96 #define NO_LOW_BATTERY_SHUTDOWN
  97
  98 #ifndef SIMULATOR
  99
 100 /* Define this if you have a TCC770 */
 101 #define CONFIG_CPU TCC770
 102
 103 /* Define this if you have ATA power-off control */
 104 #define HAVE_ATA_POWER_OFF
 105
 106 /* Define this to the CPU frequency */
 107 #define CPU_FREQ      120000000
 108
 109 /* Offset ( in the firmware file's header ) to the file CRC */
 110 #define FIRMWARE_OFFSET_FILE_CRC 0
 111
 112 /* Offset ( in the firmware file's header ) to the real data */
 113 #define FIRMWARE_OFFSET_FILE_DATA 8
 114
 115 /* The start address index for ROM builds */
 116 /* #define ROM_START 0x11010 for behind original Archos */
 117 #define ROM_START 0x7010 /* for behind BootBox */
 118
 119 /* Software controlled LED */
 120 #define CONFIG_LED LED_VIRTUAL
 121
 122 #define CONFIG_LCD LCD_S6B33B2
 123
 124 #define BOOTFILE_EXT "c100"
 125 #define BOOTFILE "rockbox." BOOTFILE_EXT
 126 #define BOOTDIR "/.rockbox"
 127
 128 #ifdef BOOTLOADER
 129 #define TCCBOOT
 130 #endif
 131
 132 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 133
 134 #endif /* SIMULATOR */