firmware/export/config-c200.h

   1 /*
   2  * This config file is for the Sandisk Sansa e200
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 20
   8 #define MODEL_NAME   "Sandisk Sansa c200 series"
   9
  10 #define HW_SAMPR_CAPS       (SAMPR_CAP_44)
  11
  12 /* define this if you have recording possibility */
  13 #define HAVE_RECORDING
  14
  15 #define REC_SAMPR_CAPS      (SAMPR_CAP_22)
  16 #define REC_FREQ_DEFAULT    REC_FREQ_22 /* Default is not 44.1kHz */
  17 #define REC_SAMPR_DEFAULT   SAMPR_22
  18
  19 /* Define bitmask of input sources - recordable bitmask can be defined
  20    explicitly if different */
  21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
  22
  23 /* define this if you have a bitmap LCD display */
  24 #define HAVE_LCD_BITMAP
  25
  26 /* define this if you have a colour LCD */
  27 #define HAVE_LCD_COLOR
  28
  29 /* define this if you want album art for this target */
  30 #define HAVE_ALBUMART
  31
  32 /* define this to enable bitmap scaling */
  33 #define HAVE_BMP_SCALING
  34
  35 /* define this to enable JPEG decoding */
  36 #define HAVE_JPEG
  37
  38 /* define this if you have a light associated with the buttons */
  39 #define HAVE_BUTTON_LIGHT
  40
  41 /* define this if you have access to the quickscreen */
  42 #define HAVE_QUICKSCREEN
  43
  44 /* define this if you have access to the pitchscreen */
  45 #define HAVE_PITCHSCREEN
  46
  47 /* define this if you would like tagcache to build on this target */
  48 #define HAVE_TAGCACHE
  49
  50 /* LCD dimensions */
  51 #define LCD_WIDTH  132
  52 #define LCD_HEIGHT 80
  53 #define LCD_DEPTH  16   /* 65536 colours */
  54 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  55
  56 /* define this if you have LCD enable function */
  57 #define HAVE_LCD_ENABLE
  58
  59 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  60    should be defined as well. */
  61 /* TODO: #define HAVE_LCD_SLEEP */
  62 /* TODO: #define HAVE_LCD_SLEEP_SETTING <= optional */
  63
  64 /* define this if you can flip your LCD */
  65 #define HAVE_LCD_FLIP
  66
  67 /* define this if you can invert the colours on your LCD */
  68 /* TODO: #define HAVE_LCD_INVERT */
  69
  70 /* Define this if your LCD can set contrast */
  71 #define HAVE_LCD_CONTRAST
  72
  73 #define MIN_CONTRAST_SETTING        0
  74 #define MAX_CONTRAST_SETTING        255
  75 #define DEFAULT_CONTRAST_SETTING    85
  76
  77 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
  78
  79 #define CONFIG_KEYPAD SANSA_C200_PAD
  80
  81 /* define this if the target has volume keys which can be used in the lists */
  82 #define HAVE_VOLUME_IN_LIST
  83
  84 /* Define this if you do software codec */
  85 #define CONFIG_CODEC SWCODEC
  86
  87 /* There is no hardware tone control */
  88 #define HAVE_SW_TONE_CONTROLS
  89
  90 /* The PP5024 has a built-in AustriaMicrosystems AS3514 */
  91 #define HAVE_AS3514
  92
  93 /* define this if you have a real-time clock */
  94 #ifndef BOOTLOADER
  95 #define CONFIG_RTC RTC_AS3514
  96 #endif
  97
  98 /* Define this if you have a software controlled poweroff */
  99 #define HAVE_SW_POWEROFF
 100
 101 /* Some Sansa E200s seem to be FAT16 formatted */
 102 #define HAVE_FAT16SUPPORT
 103
 104 /* The number of bytes reserved for loadable codecs */
 105 #define CODEC_SIZE 0x100000
 106
 107 /* The number of bytes reserved for loadable plugins */
 108 #define PLUGIN_BUFFER_SIZE 0x80000
 109
 110 #define AB_REPEAT_ENABLE 1
 111
 112 /* FM Tuner */
 113 #define CONFIG_TUNER LV24020LP
 114 #define HAVE_TUNER_PWR_CTRL
 115
 116 /* Define this for LCD backlight available */
 117 #define HAVE_BACKLIGHT
 118 #define HAVE_BACKLIGHT_BRIGHTNESS
 119
 120 /* Main LCD backlight brightness range and defaults */
 121 #define MIN_BRIGHTNESS_SETTING      1
 122 #define MAX_BRIGHTNESS_SETTING     12
 123 #define DEFAULT_BRIGHTNESS_SETTING  6
 124
 125 /* Which backlight fading type? */
 126 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
 127
 128 /* define this if you have a flash memory storage */
 129 #define HAVE_FLASH_STORAGE
 130
 131 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
 132 #define CONFIG_STORAGE STORAGE_SD
 133
 134 #define BATTERY_CAPACITY_DEFAULT 530    /* default battery capacity */
 135 #define BATTERY_CAPACITY_MIN 530        /* min. capacity selectable */
 136 #define BATTERY_CAPACITY_MAX 530        /* max. capacity selectable */
 137 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 138 #define BATTERY_TYPES_COUNT  1          /* only one type */
 139
 140 /* Charging implemented in a target-specific algorithm */
 141 #define CONFIG_CHARGING CHARGING_TARGET
 142 #define HAVE_POWEROFF_WHILE_CHARGING
 143
 144 /* define this if the unit can be powered or charged via USB */
 145 #define HAVE_USB_POWER
 146
 147 /* define current usage levels */
 148 #define CURRENT_NORMAL     30  /* Should be nearly identical to E200 */
 149 #define CURRENT_BACKLIGHT  40  /* Screen is about 20, blue LEDs are another 20, so 40 if both */
 150 #define CURRENT_RECORD     30  /* flash player, so this is just unboosted current*/
 151
 152 /** Non-simulator section **/
 153 #ifndef SIMULATOR
 154
 155 /* Define this if you have a PortalPlayer PP5024 */
 156 #define CONFIG_CPU PP5022
 157
 158 /* Define this if you want to use the PP5024 i2c interface */
 159 #define CONFIG_I2C I2C_PP5024
 160
 161 /* define this if the hardware can be powered off while charging */
 162 /* Sansa can't be powered off while charging */
 163 /* #define HAVE_POWEROFF_WHILE_CHARGING */
 164
 165 /* The start address index for ROM builds */
 166 #define ROM_START 0x00000000
 167
 168 /* Define this to the CPU frequency */
 169 #define CPU_FREQ      75000000
 170
 171 /* Type of LCD TODO: hopefully the same as the x5 but check this*/
 172 #define CONFIG_LCD LCD_C200
 173
 174 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
 175    only used when loading the old format rockbox.e200 file */
 176 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 177 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 178
 179 #ifndef BOOTLOADER
 180 #define HAVE_MULTIDRIVE
 181 #define NUM_DRIVES 2
 182 #define HAVE_HOTSWAP
 183 #endif
 184
 185 /* USB On-the-go */
 186 #define CONFIG_USBOTG USBOTG_ARC
 187
 188 /* enable these for the experimental usb stack */
 189 #define HAVE_USBSTACK
 190 #define USE_ROCKBOX_USB
 191 #define USB_VENDOR_ID 0x0781
 192 #define USB_PRODUCT_ID 0x7451
 193
 194 /* Virtual LED (icon) */
 195 #define CONFIG_LED LED_VIRTUAL
 196
 197 /* Define this if you have adjustable CPU frequency */
 198 #define HAVE_ADJUSTABLE_CPU_FREQ
 199
 200 #define MI4_FORMAT
 201 #define BOOTFILE_EXT    "mi4"
 202 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 203 #define BOOTDIR "/.rockbox"
 204
 205 #define ICODE_ATTR_TREMOR_NOT_MDCT
 206
 207 #define INCLUDE_TIMEOUT_API
 208
 209 #endif /* SIMULATOR */
 210
 211 /* Default recording levels */
 212 #define DEFAULT_REC_MIC_GAIN    23
 213 #define DEFAULT_REC_LEFT_GAIN   23
 214 #define DEFAULT_REC_RIGHT_GAIN  23