firmware/export/config-e200.h

   1 /*
   2  * This config file is for the Sandisk Sansa e200
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 16
   8 #define MODEL_NAME   "Sandisk Sansa e200 series"
   9
  10 #define HW_SAMPR_CAPS       (SAMPR_CAP_44)
  11
  12 /* define this if you have recording possibility */
  13 #define HAVE_RECORDING
  14
  15 #define REC_SAMPR_CAPS      (SAMPR_CAP_22)
  16 #define REC_FREQ_DEFAULT    REC_FREQ_22 /* Default is not 44.1kHz */
  17 #define REC_SAMPR_DEFAULT   SAMPR_22
  18
  19 /* Define bitmask of input sources - recordable bitmask can be defined
  20    explicitly if different */
  21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
  22
  23 /* define this if you have a bitmap LCD display */
  24 #define HAVE_LCD_BITMAP
  25
  26 /* define this if you have a colour LCD */
  27 #define HAVE_LCD_COLOR
  28
  29 /* define this if you want album art for this target */
  30 #define HAVE_ALBUMART
  31
  32 /* define this to enable bitmap scaling */
  33 #define HAVE_BMP_SCALING
  34
  35 /* define this to enable JPEG decoding */
  36 #define HAVE_JPEG
  37
  38 /* define this if you have a light associated with the buttons */
  39 #define HAVE_BUTTON_LIGHT
  40
  41 /* define this if you have access to the quickscreen */
  42 #define HAVE_QUICKSCREEN
  43
  44 /* define this if you have access to the pitchscreen */
  45 #define HAVE_PITCHSCREEN
  46
  47 /* define this if you would like tagcache to build on this target */
  48 #define HAVE_TAGCACHE
  49
  50 /* LCD dimensions */
  51 #define LCD_WIDTH  176
  52 #define LCD_HEIGHT 220
  53 #define LCD_DEPTH  16   /* 65536 colours */
  54 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  55
  56 #ifndef BOOTLOADER
  57 /* define this if you have LCD enable function */
  58 #define HAVE_LCD_ENABLE
  59
  60 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  61    should be defined as well. */
  62 #define HAVE_LCD_SLEEP
  63 #define HAVE_LCD_SLEEP_SETTING
  64 #endif
  65
  66 /* define this if you can flip your LCD */
  67 #define HAVE_LCD_FLIP
  68
  69 /* define this if you can invert the colours on your LCD */
  70 #define HAVE_LCD_INVERT
  71
  72 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
  73
  74 #define CONFIG_KEYPAD SANSA_E200_PAD
  75
  76 /* Define this if you do software codec */
  77 #define CONFIG_CODEC SWCODEC
  78 /* There is no hardware tone control */
  79 #define HAVE_SW_TONE_CONTROLS
  80 /* The PP5024 has a built-in AustriaMicrosystems AS3514 */
  81 #define HAVE_AS3514
  82
  83 /* define this if you have a real-time clock */
  84 #ifndef BOOTLOADER
  85 #define CONFIG_RTC RTC_AS3514
  86 #endif
  87
  88 /* Define this if you have a software controlled poweroff */
  89 #define HAVE_SW_POWEROFF
  90
  91 /* Some Sansa E200s seem to be FAT16 formatted */
  92 #define HAVE_FAT16SUPPORT
  93
  94 /* The number of bytes reserved for loadable codecs */
  95 #define CODEC_SIZE 0x100000
  96
  97 /* The number of bytes reserved for loadable plugins */
  98 #define PLUGIN_BUFFER_SIZE 0x80000
  99
 100 #define AB_REPEAT_ENABLE 1
 101
 102 /* FM Tuner */
 103 #define CONFIG_TUNER LV24020LP
 104 #define HAVE_TUNER_PWR_CTRL
 105
 106 /* Define this for LCD backlight available */
 107 #define HAVE_BACKLIGHT
 108 #define HAVE_BACKLIGHT_BRIGHTNESS
 109
 110 /* Which backlight fading type? */
 111 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
 112
 113 /* define this if the unit uses a scrollwheel for navigation */
 114 #define HAVE_SCROLLWHEEL
 115 /* define to activate advanced wheel acceleration code */
 116 #define HAVE_WHEEL_ACCELERATION
 117 /* define from which rotation speed [degree/sec] on the acceleration starts */
 118 #define WHEEL_ACCEL_START 540
 119 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 120 #define WHEEL_ACCELERATION 1
 121
 122 /* define this if you have a flash memory storage */
 123 #define HAVE_FLASH_STORAGE
 124
 125 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
 126 #define CONFIG_STORAGE STORAGE_SD
 127
 128 #define BATTERY_CAPACITY_DEFAULT 750    /* default battery capacity */
 129 #define BATTERY_CAPACITY_MIN 750        /* min. capacity selectable */
 130 #define BATTERY_CAPACITY_MAX 750        /* max. capacity selectable */
 131 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 132 #define BATTERY_TYPES_COUNT  1          /* only one type */
 133
 134 /* Charging implemented in a target-specific algorithm */
 135 #define CONFIG_CHARGING CHARGING_TARGET
 136 #define HAVE_POWEROFF_WHILE_CHARGING
 137
 138 /* define current usage levels */
 139 #define CURRENT_NORMAL     30  /* Toni's measurements in Nov 2008  */
 140 #define CURRENT_BACKLIGHT  40  /* Screen is about 20, blue LEDs are another 20, so 40 if both */
 141 #define CURRENT_RECORD     30  /* flash player, so this is just unboosted current*/
 142
 143 /* define this if the unit can be powered or charged via USB */
 144 #define HAVE_USB_POWER
 145
 146 /** Non-simulator section **/
 147 #ifndef SIMULATOR
 148
 149 /* Define this if you have a PortalPlayer PP5024 */
 150 #define CONFIG_CPU PP5024
 151
 152 /* Define this if you want to use the PP5024 i2c interface */
 153 #define CONFIG_I2C I2C_PP5024
 154
 155 /* define this if the hardware can be powered off while charging */
 156 /* Sansa can't be powered off while charging */
 157 /* #define HAVE_POWEROFF_WHILE_CHARGING */
 158
 159 /* The start address index for ROM builds */
 160 #define ROM_START 0x00000000
 161
 162 /* Define this to the CPU frequency */
 163 #define CPU_FREQ      75000000
 164
 165 /* Type of LCD TODO: hopefully the same as the x5 but check this*/
 166 #define CONFIG_LCD LCD_X5
 167
 168 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
 169    only used when loading the old format rockbox.e200 file */
 170 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 171 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 172
 173 #ifndef BOOTLOADER
 174 #define HAVE_MULTIDRIVE
 175 #define NUM_DRIVES 2
 176 #define HAVE_HOTSWAP
 177 #endif
 178
 179 /* USB On-the-go */
 180 #define CONFIG_USBOTG USBOTG_ARC
 181
 182 /* enable these for the experimental usb stack */
 183 #define HAVE_USBSTACK
 184 #define USE_ROCKBOX_USB
 185 #define USB_VENDOR_ID 0x0781
 186 #define USB_PRODUCT_ID 0x7421
 187
 188 /* Virtual LED (icon) */
 189 #define CONFIG_LED LED_VIRTUAL
 190
 191 /* Define this if you have adjustable CPU frequency */
 192 #define HAVE_ADJUSTABLE_CPU_FREQ
 193
 194 #define MI4_FORMAT
 195 #define BOOTFILE_EXT    "mi4"
 196 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 197 #define BOOTDIR "/.rockbox"
 198
 199 #define ICODE_ATTR_TREMOR_NOT_MDCT
 200
 201 #define INCLUDE_TIMEOUT_API
 202
 203 #endif /* SIMULATOR */
 204
 205 /** Port-specific settings **/
 206
 207 /* Main LCD backlight brightness range and defaults */
 208 #define MIN_BRIGHTNESS_SETTING      1
 209 #define MAX_BRIGHTNESS_SETTING     12
 210 #define DEFAULT_BRIGHTNESS_SETTING  6
 211
 212 /* Default recording levels */
 213 #define DEFAULT_REC_MIC_GAIN    23
 214 #define DEFAULT_REC_LEFT_GAIN   23
 215 #define DEFAULT_REC_RIGHT_GAIN  23
 216
 217 #ifdef E200R_INSTALLER
 218 #define IRAMORIG 0x40004000
 219 #endif
 220