firmware/export/config-fuze.h

   1 /*
   2  * This config file is for the Sandisk Sansa Fuze
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 43
   8 #define MODEL_NAME   "Sandisk Sansa Fuze"
   9
  10 #define HW_SAMPR_CAPS       (SAMPR_CAP_44)
  11
  12 #if 0
  13 /* define this if you have recording possibility */
  14 #define HAVE_RECORDING
  15
  16 #define REC_SAMPR_CAPS      (SAMPR_CAP_22)
  17 #define REC_FREQ_DEFAULT    REC_FREQ_22 /* Default is not 44.1kHz */
  18 #define REC_SAMPR_DEFAULT   SAMPR_22
  19
  20 /* Default recording levels */
  21 #define DEFAULT_REC_MIC_GAIN    23
  22 #define DEFAULT_REC_LEFT_GAIN   23
  23 #define DEFAULT_REC_RIGHT_GAIN  23
  24
  25 /* Define bitmask of input sources - recordable bitmask can be defined
  26    explicitly if different */
  27 #endif
  28 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
  29
  30 /* define this if you have a bitmap LCD display */
  31 #define HAVE_LCD_BITMAP
  32 /* define this if you have a colour LCD */
  33 #define HAVE_LCD_COLOR
  34
  35 #ifndef BOOTLOADER/* define this if you want album art for this target */
  36 #define HAVE_ALBUMART
  37
  38 /* define this to enable bitmap scaling */
  39 #define HAVE_BMP_SCALING
  40
  41 /* define this to enable JPEG decoding */
  42 #define HAVE_JPEG
  43
  44 /* define this if you have a light associated with the buttons */
  45 #define HAVE_BUTTON_LIGHT
  46
  47 /* define this if you have access to the quickscreen */
  48 #define HAVE_QUICKSCREEN
  49
  50 /* define this if you have access to the pitchscreen */
  51 #define HAVE_PITCHSCREEN
  52
  53 /* define this if you would like tagcache to build on this target */
  54 #define HAVE_TAGCACHE
  55
  56 /* define this if you have LCD enable function */
  57 #define HAVE_LCD_ENABLE
  58
  59 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  60    should be defined as well.
  61 #define HAVE_LCD_SLEEP
  62 #define HAVE_LCD_SLEEP_SETTING
  63 */
  64
  65 /* define this if you can flip your LCD */
  66 //#define HAVE_LCD_FLIP
  67
  68 /* define this if you can invert the colours on your LCD */
  69 //#define HAVE_LCD_INVERT
  70
  71
  72 /* define this if you have a real-time clock */
  73 #define CONFIG_RTC RTC_AS3514
  74
  75 /* There is no hardware tone control */
  76 #define HAVE_SW_TONE_CONTROLS
  77
  78 #endif /* !BOOTLOADER */
  79
  80 /* put the lcd frame buffer in IRAM */
  81 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR
  82
  83 #define CONFIG_KEYPAD SANSA_FUZE_PAD
  84
  85 /* Define this if you do software codec */
  86 #define CONFIG_CODEC SWCODEC
  87
  88
  89 /* LCD dimensions */
  90 #define LCD_WIDTH  220
  91 #define LCD_HEIGHT 176
  92 #define LCD_DEPTH  16   /* 65536 colours */
  93 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  94
  95
  96 /* We're working on the assumption that the AS3525 has something
  97    similar to the AS3514 for audio codec etc */
  98 #define HAVE_AS3514
  99
 100 /* Define this if you have a software controlled poweroff */
 101 #define HAVE_SW_POWEROFF
 102
 103 /* Some Sansa Fuzes seem to be FAT16 formatted */
 104 #define HAVE_FAT16SUPPORT
 105
 106 /* The number of bytes reserved for loadable codecs */
 107 #define CODEC_SIZE 0x100000
 108
 109 /* The number of bytes reserved for loadable plugins */
 110 #define PLUGIN_BUFFER_SIZE 0x80000
 111
 112 #define AB_REPEAT_ENABLE 1
 113
 114 /* FM Tuner - suspected to be the SI4702 */
 115 #define CONFIG_TUNER SI4700
 116 /* #define HAVE_TUNER_PWR_CTRL */
 117
 118 /* Define this for LCD backlight available */
 119 #define HAVE_BACKLIGHT
 120 #define HAVE_BACKLIGHT_BRIGHTNESS
 121
 122 /* Main LCD backlight brightness range and defaults */
 123 #define MIN_BRIGHTNESS_SETTING      1
 124 #define MAX_BRIGHTNESS_SETTING     12
 125 #define DEFAULT_BRIGHTNESS_SETTING  6
 126
 127 /* Which backlight fading type? */
 128 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
 129
 130 /* define this if the unit uses a scrollwheel for navigation */
 131 #define HAVE_SCROLLWHEEL
 132 /* define to activate advanced wheel acceleration code */
 133 #define HAVE_WHEEL_ACCELERATION
 134 /* define from which rotation speed [degree/sec] on the acceleration starts */
 135 #define WHEEL_ACCEL_START 540
 136 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 137 #define WHEEL_ACCELERATION 1
 138
 139 /* define this if you have a flash memory storage */
 140 #define HAVE_FLASH_STORAGE
 141
 142 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
 143 #define CONFIG_STORAGE STORAGE_SD
 144
 145 #define BATTERY_CAPACITY_DEFAULT 550    /* default battery capacity */
 146 #define BATTERY_CAPACITY_MIN 550        /* min. capacity selectable */
 147 #define BATTERY_CAPACITY_MAX 550        /* max. capacity selectable */
 148 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 149 #define BATTERY_TYPES_COUNT  1          /* only one type */
 150
 151 /* Charging implemented in a target-specific algorithm */
 152 #define CONFIG_CHARGING CHARGING_TARGET
 153
 154 /* define this if the unit can be powered or charged via USB */
 155 #define HAVE_USB_POWER
 156
 157 /** Non-simulator section **/
 158 #ifndef SIMULATOR
 159
 160 /* Define this if you have an AMS AS3525*/
 161 #define CONFIG_CPU AS3525
 162
 163 /* Define how much SD sectors are reserved for OF */
 164 #define AMS_OF_SIZE 0xF000
 165
 166 /* Define this if you want to use the AS2525 i2c interface */
 167 #define CONFIG_I2C I2C_AS3525
 168
 169 /* Define this to the CPU frequency */
 170 #define CPU_FREQ      250000000
 171
 172 /* Type of LCD */
 173 #define CONFIG_LCD LCD_FUZE
 174
 175 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
 176    only used when loading the old format rockbox.e200 file */
 177 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 178 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 179
 180 #ifndef BOOTLOADER
 181 #define HAVE_MULTIDRIVE
 182 #define NUM_DRIVES 2
 183 #define HAVE_HOTSWAP
 184 #endif
 185
 186 #define USB_HANDLED_BY_OF
 187
 188 /* USB On-the-go */
 189 #define CONFIG_USBOTG USBOTG_AS3525
 190
 191 /* enable these for the experimental usb stack */
 192 #define HAVE_USBSTACK
 193 #define USB_VENDOR_ID 0x0781
 194 #define USB_PRODUCT_ID 0x7423
 195
 196 /* Virtual LED (icon) */
 197 #define CONFIG_LED LED_VIRTUAL
 198
 199 /* Define this if you have adjustable CPU frequency */
 200 #define HAVE_ADJUSTABLE_CPU_FREQ
 201
 202 #define BOOTFILE_EXT    "sansa"
 203 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 204 #define BOOTDIR "/.rockbox"
 205
 206 #define ICODE_ATTR_TREMOR_NOT_MDCT
 207
 208 #define INCLUDE_TIMEOUT_API
 209
 210 #endif /* SIMULATOR */
 211