firmware/export/config-h10_5gb.h

   1 /*
   2  * This config file is for the iriver H10 5/6Gb model
   3  */
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 14
   9 #define MODEL_NAME   "iriver H10 5/6GB"
  10
  11 /* define this if you use an ATA controller */
  12 #define CONFIG_STORAGE STORAGE_ATA
  13
  14 /* define this if you have recording possibility */
  15 #define HAVE_RECORDING
  16 /* Define bitmask of input sources - recordable bitmask can be defined
  17    explicitly if different */
  18 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
  19
  20 /* define the bitmask of hardware sample rates */
  21 #define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  22                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
  23
  24 /* define the bitmask of recording sample rates */
  25 #define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  26                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
  27
  28 /* define this if you have a bitmap LCD display */
  29 #define HAVE_LCD_BITMAP
  30
  31 /* define this if you have a colour LCD */
  32 #define HAVE_LCD_COLOR
  33
  34 /* define this if you want album art for this target */
  35 #define HAVE_ALBUMART
  36
  37 /* define this to enable bitmap scaling */
  38 #define HAVE_BMP_SCALING
  39
  40 /* define this to enable JPEG decoding */
  41 #define HAVE_JPEG
  42
  43 /* define this if you have access to the quickscreen */
  44 #define HAVE_QUICKSCREEN
  45
  46 /* define this if you have access to the pitchscreen */
  47 #define HAVE_PITCHSCREEN
  48
  49 /* define this if you would like tagcache to build on this target */
  50 #define HAVE_TAGCACHE
  51
  52 /* LCD dimensions */
  53 #define LCD_WIDTH  128
  54 #define LCD_HEIGHT 128
  55 #define LCD_DEPTH  16   /* 65536 colours */
  56 #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
  57
  58 /*#define IRAM_LCDFRAMEBUFFER IDATA_ATTR*//* put the lcd frame buffer in IRAM */
  59
  60 #define CONFIG_KEYPAD IRIVER_H10_PAD
  61
  62 /* Define this if you do software codec */
  63 #define CONFIG_CODEC SWCODEC
  64
  65 /* define this if you have a real-time clock */
  66 #ifndef BOOTLOADER
  67 #define CONFIG_RTC RTC_E8564
  68 #define HAVE_RTC_ALARM
  69 #endif
  70
  71 /* Define this if you have a software controlled poweroff */
  72 #define HAVE_SW_POWEROFF
  73
  74 /* The number of bytes reserved for loadable codecs */
  75 #define CODEC_SIZE 0x100000
  76
  77 /* The number of bytes reserved for loadable plugins */
  78 #define PLUGIN_BUFFER_SIZE 0x80000
  79
  80 /* Define this if you have the WM8731 audio codec */
  81 #define HAVE_WM8731
  82
  83 /* WM8731 has no tone controls, so we use the software ones */
  84 #define HAVE_SW_TONE_CONTROLS
  85
  86 #define AB_REPEAT_ENABLE 1
  87
  88 /* FM Tuner */
  89 #define CONFIG_TUNER TEA5767
  90 #define CONFIG_TUNER_XTAL  32768
  91
  92 /* define this if you have a disk storage, i.e. something
  93    that needs spinups and can cause skips when shaked */
  94 #define HAVE_DISK_STORAGE
  95
  96 /* Define this for LCD backlight available */
  97 #define HAVE_BACKLIGHT
  98
  99 #define AB_REPEAT_ENABLE 1
 100
 101 #define BATTERY_CAPACITY_DEFAULT 820 /* default battery capacity */
 102 #define BATTERY_CAPACITY_MIN 700  /* min. capacity selectable */
 103 #define BATTERY_CAPACITY_MAX 900 /* max. capacity selectable */
 104 #define BATTERY_CAPACITY_INC 10   /* capacity increment */
 105 #define BATTERY_TYPES_COUNT  1    /* only one type */
 106
 107 /* Hardware controlled charging */
 108 #define CONFIG_CHARGING CHARGING_SIMPLE
 109
 110 /* define this if the unit can be powered or charged via USB */
 111 #define HAVE_USB_POWER
 112
 113 #ifndef SIMULATOR
 114
 115 /* Define this if you have a PortalPlayer PP5020 */
 116 #define CONFIG_CPU PP5020
 117
 118 /* Define this if you want to use the PP5020 i2c interface */
 119 #define CONFIG_I2C I2C_PP5020
 120
 121 /* define this if the hardware can be powered off while charging */
 122 #define HAVE_POWEROFF_WHILE_CHARGING
 123
 124 /* The start address index for ROM builds */
 125 #define ROM_START 0x00000000
 126
 127 /* The size of the flash ROM */
 128 #define FLASH_SIZE 0x100000
 129
 130 /* Define this to the CPU frequency */
 131 /* TODO: this is probably wrong */
 132 #define CPU_FREQ      75000000
 133
 134 /* Type of LCD */
 135 #define CONFIG_LCD LCD_H10_5GB
 136
 137 /* We're able to shut off power to the HDD */
 138 #define HAVE_ATA_POWER_OFF
 139
 140 /* Offset ( in the firmware file's header ) to the file length */
 141 #define FIRMWARE_OFFSET_FILE_LENGTH 0x8
 142
 143 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
 144    only used when loading the old format rockbox.h10 file */
 145 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 146 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 147
 148 /* USB On-the-go */
 149 #define CONFIG_USBOTG USBOTG_ARC
 150
 151 /* enable these for the experimental usb stack */
 152 #define HAVE_USBSTACK
 153 #define USE_ROCKBOX_USB
 154 #define USB_VENDOR_ID 0x0B70
 155 #define USB_PRODUCT_ID 0x00BA
 156
 157 /* Virtual LED (icon) */
 158 #define CONFIG_LED LED_VIRTUAL
 159
 160 /* Define this if you have adjustable CPU frequency */
 161 #define HAVE_ADJUSTABLE_CPU_FREQ
 162
 163 #define MI4_FORMAT
 164 #define BOOTFILE_EXT    "mi4"
 165 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 166 #define BOOTDIR "/.rockbox"
 167
 168 #define ICODE_ATTR_TREMOR_NOT_MDCT
 169
 170 #endif