firmware/export/config-h120.h

   1 #define TARGET_TREE /* this target is using the target tree system */
   2 /*
   3  * This config file is for iriver H120 and H140
   4  */
   5 #define IRIVER_H100_SERIES 1
   6
   7 #define MODEL_NAME "iriver H120/H140"
   8
   9 /* For Rolo and boot loader */
  10 #define MODEL_NUMBER 0
  11
  12 /* define this if you use an ATA controller */
  13 #define CONFIG_STORAGE STORAGE_ATA
  14
  15 /* define this if you have a bitmap LCD display */
  16 #define HAVE_LCD_BITMAP
  17
  18 /* define this if you want album art for this target */
  19 #define HAVE_ALBUMART
  20
  21 /* define this to enable bitmap scaling */
  22 #define HAVE_BMP_SCALING
  23
  24 /* define this to enable JPEG decoding */
  25 #define HAVE_JPEG
  26
  27 /* define this if you can flip your LCD */
  28 #define HAVE_LCD_FLIP
  29
  30 /* define this if you can invert the colours on your LCD */
  31 #define HAVE_LCD_INVERT
  32
  33 /* define this if you have access to the quickscreen */
  34 #define HAVE_QUICKSCREEN
  35 /* define this if you have access to the pitchscreen */
  36 #define HAVE_PITCHSCREEN
  37
  38 /* define this if you would like tagcache to build on this target */
  39 #define HAVE_TAGCACHE
  40
  41 /* LCD dimensions */
  42 #define LCD_WIDTH  160
  43 #define LCD_HEIGHT 128
  44 #define LCD_DEPTH  2
  45
  46 #define LCD_PIXELFORMAT VERTICAL_PACKING
  47
  48 /* Display colours, for screenshots and sim (0xRRGGBB) */
  49 #define LCD_DARKCOLOR       0x000000
  50 #define LCD_BRIGHTCOLOR     0x5a915a
  51 #define LCD_BL_DARKCOLOR    0x000000
  52 #define LCD_BL_BRIGHTCOLOR  0xadd8e6
  53
  54 /* remote LCD */
  55 #define LCD_REMOTE_WIDTH  128
  56 #define LCD_REMOTE_HEIGHT 64
  57 #define LCD_REMOTE_DEPTH  1
  58
  59 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
  60
  61 /* Remote display colours, for screenshots and sim (0xRRGGBB) */
  62 #define LCD_REMOTE_DARKCOLOR       0x000000
  63 #define LCD_REMOTE_BRIGHTCOLOR     0x5a915a
  64 #define LCD_REMOTE_BL_DARKCOLOR    0x000000
  65 #define LCD_REMOTE_BL_BRIGHTCOLOR  0x82b4fa
  66
  67 #define CONFIG_KEYPAD IRIVER_H100_PAD
  68
  69 #define CONFIG_REMOTE_KEYPAD H100_REMOTE
  70
  71 /* Define this if you do software codec */
  72 #define CONFIG_CODEC SWCODEC
  73
  74 /* define this if you have a disk storage, i.e. something
  75    that needs spinups and can cause skips when shaked */
  76 #define HAVE_DISK_STORAGE
  77
  78 /* Define this if you have an remote lcd */
  79 #define HAVE_REMOTE_LCD
  80
  81 /* Define if we have a hardware defect that causes ticking on the audio line */
  82 #define HAVE_REMOTE_LCD_TICKING
  83
  84 #define CONFIG_LCD LCD_S1D15E06
  85
  86 /* Define this for LCD backlight available */
  87 #define HAVE_BACKLIGHT
  88
  89 /* We can fade the backlight by using PWM */
  90 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
  91
  92 /* Define this if you have a software controlled poweroff */
  93 #define HAVE_SW_POWEROFF
  94
  95 /* The number of bytes reserved for loadable codecs */
  96 #define CODEC_SIZE 0x100000
  97
  98 /* The number of bytes reserved for loadable plugins */
  99 #define PLUGIN_BUFFER_SIZE 0x80000
 100
 101 #define AB_REPEAT_ENABLE 1
 102
 103 #define CONFIG_TUNER TEA5767
 104 #define CONFIG_TUNER_XTAL 32768
 105
 106 #define HAVE_UDA1380
 107
 108 /* define this if you have recording possibility */
 109 #define HAVE_RECORDING
 110
 111 /* Define bitmask of input sources - recordable bitmask can be defined
 112    explicitly if different */
 113 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | \
 114                         SRC_CAP_FMRADIO | SRC_CAP_SPDIF)
 115
 116 /* define hardware samples rate caps mask */
 117 #define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
 118
 119 /* define the bitmask of recording sample rates */
 120 #define REC_SAMPR_CAPS  (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
 121
 122 #define HAVE_AGC
 123
 124 #define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
 125 #define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
 126 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 127 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 128 #define BATTERY_TYPES_COUNT  1    /* only one type */
 129
 130 /* Hardware controlled charging */
 131 #define CONFIG_CHARGING CHARGING_SIMPLE
 132
 133 /* define current usage levels */
 134 #define CURRENT_NORMAL     80  /* 16h playback on 1300mAh battery */
 135 #define CURRENT_BACKLIGHT  23  /* from IriverBattery twiki page */
 136 #define CURRENT_SPDIF_OUT  10  /* optical SPDIF output on */
 137 #define CURRENT_RECORD    105  /* additional current while recording */
 138 #define CURRENT_REMOTE      8  /* additional current when remote connected */
 139
 140 #ifndef SIMULATOR
 141
 142 /* Define this if you have a Motorola SCF5249 */
 143 #define CONFIG_CPU MCF5249
 144
 145 /* Define this if you want to use coldfire's i2c interface */
 146 #define CONFIG_I2C I2C_COLDFIRE
 147
 148 /* Define this if you can run rockbox from flash memory */
 149 #define HAVE_FLASHED_ROCKBOX
 150
 151 /* define this if the hardware can be powered off while charging */
 152 #define HAVE_POWEROFF_WHILE_CHARGING
 153
 154 /* The size of the flash ROM */
 155 #define FLASH_SIZE 0x200000
 156
 157 /* Define this to the CPU frequency */
 158 #define CPU_FREQ      11289600
 159
 160 /* Define this if you have ATA power-off control */
 161 #define HAVE_ATA_POWER_OFF
 162
 163 /* Offset ( in the firmware file's header ) to the file CRC */
 164 #define FIRMWARE_OFFSET_FILE_CRC 0
 165
 166 /* Offset ( in the firmware file's header ) to the real data */
 167 #define FIRMWARE_OFFSET_FILE_DATA 8
 168
 169 #define HAVE_ATA_LED_CTRL
 170
 171 /* Define this if you have adjustable CPU frequency */
 172 #define HAVE_ADJUSTABLE_CPU_FREQ
 173
 174 #define BOOTFILE_EXT "iriver"
 175 #define BOOTFILE "rockbox." BOOTFILE_EXT
 176 #define BOOTDIR "/.rockbox"
 177
 178 #define BOOTLOADER_ENTRYPOINT  0x001F0000
 179 #define FLASH_RAMIMAGE_ENTRY   0x00001000
 180 #define FLASH_ROMIMAGE_ENTRY   0x00100000
 181 #define FLASH_MAGIC            0xfbfbfbf2
 182
 183 /* Define this if there is an EEPROM chip */
 184 #define HAVE_EEPROM
 185
 186 /* Define this if the EEPROM chip is used */
 187 #define HAVE_EEPROM_SETTINGS
 188
 189 #endif /* !SIMULATOR */
 190
 191 /* Define this for S/PDIF output available */
 192 #define HAVE_SPDIF_OUT
 193
 194 /* Define this if you can control the S/PDIF power */
 195 #define HAVE_SPDIF_POWER
 196
 197 /* Define this if you have a serial port */
 198 /*#define HAVE_SERIAL*/
 199
 200 /** Port-specific settings **/
 201
 202 #define HAVE_LCD_CONTRAST
 203
 204 /* Main LCD backlight brightness range and defaults */
 205 #define MIN_CONTRAST_SETTING        14 /* White screen a bit higher than this */
 206 #define MAX_CONTRAST_SETTING        63 /* Black screen a bit lower than this */
 207 #define DEFAULT_CONTRAST_SETTING    27
 208
 209 /* Remote LCD contrast range and defaults */
 210 #define MIN_REMOTE_CONTRAST_SETTING     5
 211 #define MAX_REMOTE_CONTRAST_SETTING     63
 212 #define DEFAULT_REMOTE_CONTRAST_SETTING 42
 213
 214 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */