firmware/export/config-m200v4.h

   1 /*
   2  * This config file is for the Sansa M200 V4 series
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 42
   8
   9 #define MODEL_NAME   "Sandisk Sansa m200 v4 series"
  10
  11 /* Enable FAT16 support */
  12 #define HAVE_FAT16SUPPORT
  13
  14 #if 0 /* disabled since there is no driver (yet) */
  15
  16 #define HW_SAMPR_CAPS       (SAMPR_CAP_44)
  17
  18 /* define this if you have recording possibility */
  19 #define HAVE_RECORDING
  20
  21 #define REC_SAMPR_CAPS      (SAMPR_CAP_22)
  22 #define REC_FREQ_DEFAULT    REC_FREQ_22 /* Default is not 44.1kHz */
  23 #define REC_SAMPR_DEFAULT   SAMPR_22
  24
  25 #endif
  26
  27 /* Define bitmask of input sources - recordable bitmask can be defined
  28    explicitly if different */
  29 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
  30
  31 /* define this if you have a bitmap LCD display */
  32 #define HAVE_LCD_BITMAP
  33
  34 /* define this if you can flip your LCD */
  35 #define HAVE_LCD_FLIP
  36
  37 /* define this if you can invert the colours on your LCD */
  38 #define HAVE_LCD_INVERT
  39
  40 /* define this if you have access to the quickscreen */
  41 //#define HAVE_QUICKSCREEN
  42 /* define this if you have access to the pitchscreen */
  43 #define HAVE_PITCHSCREEN
  44
  45 /* define this if you would like tagcache to build on this target */
  46 //#define HAVE_TAGCACHE
  47
  48 /* define this if you have a flash memory storage */
  49 #define HAVE_FLASH_STORAGE
  50
  51 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
  52 #define CONFIG_STORAGE STORAGE_SD
  53
  54 /* LCD dimensions */
  55 #define LCD_WIDTH  128
  56 #define LCD_HEIGHT 64
  57 #define LCD_DEPTH  1
  58
  59 #define LCD_PIXELFORMAT VERTICAL_PACKING
  60
  61 /* Display colours, for screenshots and sim (0xRRGGBB) */
  62 #define LCD_DARKCOLOR       0x000000
  63 #define LCD_BRIGHTCOLOR     0x5e6854
  64 #define LCD_BL_DARKCOLOR    0x000000
  65 #define LCD_BL_BRIGHTCOLOR  0x3ca0e6
  66
  67 /* define this to indicate your device's keypad */
  68 #define CONFIG_KEYPAD SANSA_M200_PAD
  69
  70 /* define this if you have a real-time clock */
  71 #ifndef BOOTLOADER
  72 #define CONFIG_RTC RTC_AS3514
  73 #endif
  74
  75 /* define this if you have RTC RAM available for settings */
  76 //#define HAVE_RTC_RAM
  77
  78 /* Define this if you have a software controlled poweroff */
  79 #define HAVE_SW_POWEROFF
  80
  81 /* The number of bytes reserved for loadable codecs */
  82 #define CODEC_SIZE 0x48000 /* in IRAM */
  83
  84 /* The number of bytes reserved for loadable plugins */
  85 #define PLUGIN_BUFFER_SIZE 0x60000
  86
  87 #define AB_REPEAT_ENABLE 1
  88
  89 #define CONFIG_TUNER TEA5767
  90 #define CONFIG_TUNER_XTAL 32768
  91
  92 /* Define this if you do software codec */
  93 #define CONFIG_CODEC SWCODEC
  94
  95 /* Define this if you have the TLV320 audio codec */
  96 /*#define HAVE_TLV320*/
  97
  98 /* TLV320 has no tone controls, so we use the software ones */
  99 #define HAVE_SW_TONE_CONTROLS
 100
 101 /* We're working on the assumption that the AS3525 has something
 102    similar to the AS3514 for audio codec etc */
 103 #define HAVE_AS3514
 104
 105 /* Define this for LCD backlight available */
 106 #define HAVE_BACKLIGHT
 107
 108 /* Define how much SD sectors are reserved for OF */
 109 #define AMS_OF_SIZE 0x5000
 110
 111 #define CONFIG_I2C I2C_AS3525
 112
 113 #define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
 114 #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
 115 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 116 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 117 #define BATTERY_TYPES_COUNT  1    /* only one type */
 118
 119 /* define this if the unit should not shut down on low battery. */
 120 #define NO_LOW_BATTERY_SHUTDOWN
 121
 122 #ifndef SIMULATOR
 123
 124 /* Define this if you have an AMS AS3525 */
 125 #define CONFIG_CPU AS3525
 126
 127 /* Define this if you want to use the AS3525 i2c interface */
 128 #define CONFIG_I2C I2C_AS3525
 129
 130 /* Define this to the CPU frequency */
 131 #define CPU_FREQ      250000000
 132
 133 /* Define this if you have adjustable CPU frequency */
 134 #define HAVE_ADJUSTABLE_CPU_FREQ
 135
 136 /* Offset ( in the firmware file's header ) to the file CRC */
 137 #define FIRMWARE_OFFSET_FILE_CRC 0
 138
 139 /* Offset ( in the firmware file's header ) to the real data */
 140 #define FIRMWARE_OFFSET_FILE_DATA 8
 141
 142 #ifndef BOOTLOADER
 143
 144 #define USB_HANDLED_BY_OF
 145
 146 #define CONFIG_USBOTG USBOTG_AS3525
 147
 148 /* enable these for the experimental usb stack */
 149 #define HAVE_USBSTACK
 150 #define USB_VENDOR_ID 0x0781
 151 #define USB_PRODUCT_ID 0x7431
 152
 153 #endif /* BOOTLOADER */
 154
 155 /* Software controlled LED */
 156 #define CONFIG_LED LED_VIRTUAL
 157
 158 #define CONFIG_LCD LCD_SSD1815
 159
 160 #define BOOTFILE_EXT "sansa"
 161 #define BOOTFILE "rockbox." BOOTFILE_EXT
 162 #define BOOTDIR "/.rockbox"
 163
 164 #define IBSS_ATTR_VOICE_STACK
 165 #define ICODE_ATTR_TREMOR_NOT_MDCT
 166 #define ICODE_ATTR_TREMOR_MDCT
 167 #define ICODE_ATTR_FLAC
 168 #define IBSS_ATTR_FLAC_DECODED0
 169 #define ICONST_ATTR_MPA_HUFFMAN
 170 #define IBSS_ATTR_MPC_SAMPLE_BUF
 171 #define ICODE_ATTR_ALAC
 172 #define IBSS_ATTR_SHORTEN_DECODED0
 173
 174 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 175
 176 #endif /* SIMULATOR */