firmware/export/config-sa9200.h

   1 /*
   2  * This config file is for the Philips GoGear SA9200
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 34
   8 #define MODEL_NAME   "Philips GoGear SA200"
   9
  10 #define HW_SAMPR_CAPS       (SAMPR_CAP_44)
  11
  12 /* define this if you have a bitmap LCD display */
  13 #define HAVE_LCD_BITMAP
  14
  15 /* define this if you have a colour LCD */
  16 #define HAVE_LCD_COLOR
  17
  18 /* define this if you want album art for this target */
  19 #define HAVE_ALBUMART
  20
  21 /* define this to enable bitmap scaling */
  22 #define HAVE_BMP_SCALING
  23
  24 /* define this to enable JPEG decoding */
  25 #define HAVE_JPEG
  26
  27 /* define this if you have a light associated with the buttons */
  28 #define HAVE_BUTTON_LIGHT
  29
  30 /* define this if you have access to the quickscreen */
  31 #define HAVE_QUICKSCREEN
  32
  33 /* define this if you have access to the pitchscreen */
  34 #define HAVE_PITCHSCREEN
  35
  36 /* define this if you would like tagcache to build on this target */
  37 #define HAVE_TAGCACHE
  38
  39 /* LCD dimensions */
  40 #define LCD_WIDTH  128
  41 #define LCD_HEIGHT 160
  42 #define LCD_DEPTH  16   /* 65536 colours */
  43 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  44
  45 #ifndef BOOTLOADER
  46 /* define this if you have LCD enable function */
  47 #define HAVE_LCD_ENABLE
  48
  49 /* Define this if your LCD can be put to sleep.
  50    HAVE_LCD_ENABLE should be defined as well. */
  51 #define HAVE_LCD_SLEEP
  52 #define HAVE_LCD_SLEEP_SETTING
  53 #endif
  54
  55 /* define this if you can flip your LCD */
  56 #define HAVE_LCD_FLIP
  57
  58 /* define this if you can invert the colours on your LCD */
  59 #define HAVE_LCD_INVERT
  60
  61 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
  62
  63 #define CONFIG_KEYPAD PHILIPS_SA9200_PAD
  64
  65 /* define this if the target has volume keys which can be used in the lists */
  66 #define HAVE_VOLUME_IN_LIST
  67
  68 /* Define this if you do software codec */
  69 #define CONFIG_CODEC SWCODEC
  70
  71 /* There is no hardware tone control */
  72 #define HAVE_SW_TONE_CONTROLS
  73
  74 /* The PP5024 has a built-in AustriaMicrosystems AS3514 */
  75 #define HAVE_AS3514
  76
  77 /* define this if you have a real-time clock */
  78 #ifndef BOOTLOADER
  79 #define CONFIG_RTC RTC_AS3514
  80 #endif
  81
  82 /* Define this if you have a software controlled poweroff */
  83 #define HAVE_SW_POWEROFF
  84
  85 /* Some Sansa E200s seem to be FAT16 formatted */
  86 #define HAVE_FAT16SUPPORT
  87
  88 /* The number of bytes reserved for loadable codecs */
  89 #define CODEC_SIZE 0x100000
  90
  91 /* The number of bytes reserved for loadable plugins */
  92 #define PLUGIN_BUFFER_SIZE 0x80000
  93
  94 #define AB_REPEAT_ENABLE 1
  95
  96 /* Define this for LCD backlight available */
  97 #define HAVE_BACKLIGHT
  98 #define HAVE_BACKLIGHT_BRIGHTNESS
  99
 100 /* Main LCD backlight brightness range and defaults */
 101 #define MIN_BRIGHTNESS_SETTING      1
 102 #define MAX_BRIGHTNESS_SETTING     12
 103 #define DEFAULT_BRIGHTNESS_SETTING  6
 104
 105 /* Which backlight fading type? */
 106 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
 107
 108 /* define this if you have a light associated with the buttons */
 109 #define HAVE_BUTTON_LIGHT
 110 /* Can't control the brightness on all the buttons */
 111 /* #define HAVE_BUTTONLIGHT_BRIGHTNESS */
 112
 113 /* define this if you have a flash memory storage */
 114 #define HAVE_FLASH_STORAGE
 115
 116 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
 117 #define CONFIG_STORAGE STORAGE_SD
 118
 119 #define BATTERY_CAPACITY_DEFAULT 750    /* default battery capacity */
 120 #define BATTERY_CAPACITY_MIN 750        /* min. capacity selectable */
 121 #define BATTERY_CAPACITY_MAX 750        /* max. capacity selectable */
 122 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 123 #define BATTERY_TYPES_COUNT  1          /* only one type */
 124
 125 /* Charging implemented in a target-specific algorithm */
 126 #define CONFIG_CHARGING CHARGING_TARGET
 127 #define HAVE_POWEROFF_WHILE_CHARGING
 128
 129 /* define current usage levels (copied from the e200v1 )*/
 130 #define CURRENT_NORMAL     30  /* Toni's measurements in Nov 2008  */
 131 #define CURRENT_BACKLIGHT  40  /* Screen is about 20, blue LEDs are another 20, so 40 if both */
 132 #define CURRENT_RECORD     30  /* flash player, so this is just unboosted current*/
 133
 134 /* define this if the unit can be powered or charged via USB */
 135 #define HAVE_USB_POWER
 136
 137 /** Non-simulator section **/
 138 #ifndef SIMULATOR
 139
 140 /* Define this if you have a PortalPlayer PP5024 */
 141 #define CONFIG_CPU PP5024
 142
 143 /* Define this if you want to use the PP5024 i2c interface */
 144 #define CONFIG_I2C I2C_PP5024
 145
 146 /* define this if the hardware can be powered off while charging */
 147 /* Sansa can't be powered off while charging */
 148 /* #define HAVE_POWEROFF_WHILE_CHARGING */
 149
 150 /* The start address index for ROM builds */
 151 #define ROM_START 0x00000000
 152
 153 /* Define this to the CPU frequency */
 154 #define CPU_FREQ 75000000
 155
 156 /* Type of LCD */
 157 #define CONFIG_LCD LCD_SA9200
 158
 159 /* Define this if your LCD can set contrast */
 160 #define HAVE_LCD_CONTRAST
 161
 162 #define MIN_CONTRAST_SETTING        0
 163 #define MAX_CONTRAST_SETTING       31
 164 #define DEFAULT_CONTRAST_SETTING   22 /* Match boot contrast */
 165
 166 /* USB On-the-go */
 167 #define CONFIG_USBOTG USBOTG_ARC
 168
 169 /* enable these for the experimental usb stack */
 170 #define HAVE_USBSTACK
 171 #define USE_ROCKBOX_USB
 172 #define USB_VENDOR_ID 0x0471
 173 #define USB_PRODUCT_ID 0x014f
 174
 175 /* WARNING! Enable Rockbox USB mass storage. */
 176 #ifndef BOOTLOADER
 177 #define USE_ROCKBOX_USB
 178 #endif
 179
 180 /* Virtual LED (icon) */
 181 #define CONFIG_LED LED_VIRTUAL
 182
 183 /* Define this if you have adjustable CPU frequency */
 184 #define HAVE_ADJUSTABLE_CPU_FREQ
 185
 186 #define MI4_FORMAT
 187 #define BOOTFILE_EXT    "mi4"
 188 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 189 #define BOOTDIR "/.rockbox"
 190
 191 /* These values are unused, but need to be defined */
 192 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 193 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 194
 195 #define ICODE_ATTR_TREMOR_NOT_MDCT
 196
 197 #define INCLUDE_TIMEOUT_API
 198
 199 #endif /* SIMULATOR */