firmware/export/config-tpj1022.h

   1 /*
   2  * This config file is for the Tatung Elio TPJ-1022
   3  */
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 #define MODEL_NAME "Tatung Elio TPJ-1022"
   8
   9 /* For Rolo and boot loader */
  10 #define MODEL_NUMBER 15
  11
  12 /* define this if you use an ATA controller */
  13 #define CONFIG_STORAGE STORAGE_ATA
  14
  15 /* define this if you have recording possibility */
  16 /*#define HAVE_RECORDING*/ /* TODO: add support for this */
  17
  18 /* define the bitmask of hardware sample rates */
  19 #define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  20                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
  21
  22 /* define the bitmask of recording sample rates
  23 #define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  24                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
  25
  26 /* define this if you have a bitmap LCD display */
  27 #define HAVE_LCD_BITMAP
  28
  29 /* define this if you have a colour LCD */
  30 #define HAVE_LCD_COLOR
  31
  32 /* define this if you have access to the quickscreen */
  33 #define HAVE_QUICKSCREEN
  34
  35 /* define this if you have access to the pitchscreen */
  36 #define HAVE_PITCHSCREEN
  37
  38 /* LCD dimensions */
  39 #define LCD_WIDTH  220
  40 #define LCD_HEIGHT 176
  41 #define LCD_DEPTH  16   /* 65536 colours */
  42 #define LCD_PIXELFORMAT RGB565
  43
  44 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
  45
  46 #define CONFIG_KEYPAD ELIO_TPJ1022_PAD
  47
  48 /* Define this if you do software codec */
  49 #define CONFIG_CODEC SWCODEC
  50
  51 /* define this if you have a real-time clock */
  52 #ifndef BOOTLOADER
  53 //#define CONFIG_RTC RTC_E8564
  54 #endif
  55
  56 /* Define this if you have a software controlled poweroff */
  57 #define HAVE_SW_POWEROFF
  58
  59 /* The number of bytes reserved for loadable codecs */
  60 #define CODEC_SIZE 0x100000
  61
  62 /* The number of bytes reserved for loadable plugins */
  63 #define PLUGIN_BUFFER_SIZE 0x80000
  64
  65 /* Define this if you have the WM8731 audio codec */
  66 #define HAVE_WM8731
  67
  68 #define AB_REPEAT_ENABLE 1
  69
  70 /* define this if you have a disk storage, i.e. something
  71    that needs spinups and can cause skips when shaked */
  72 #define HAVE_DISK_STORAGE
  73
  74 /* Define this for LCD backlight available */
  75 #define HAVE_BACKLIGHT
  76
  77 #define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity
  78                                         TODO: check this, probably different
  79                                         for different models too */
  80 #define BATTERY_CAPACITY_MIN 1500  /* min. capacity selectable */
  81 #define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */
  82 #define BATTERY_CAPACITY_INC 10   /* capacity increment */
  83 #define BATTERY_TYPES_COUNT  1    /* only one type */
  84
  85 /* Hardware controlled charging? FIXME */
  86 #define CONFIG_CHARGING CHARGING_SIMPLE
  87
  88 /* define this if the unit can be powered or charged via USB */
  89 /*#define HAVE_USB_POWER*/
  90
  91 #ifndef SIMULATOR
  92
  93 /* Define this if you have a PortalPlayer PP5020 */
  94 #define CONFIG_CPU PP5020
  95
  96 /* Define this if you want to use the PP5020 i2c interface */
  97 #define CONFIG_I2C I2C_PP5020
  98
  99 /* define this if the hardware can be powered off while charging */
 100 /* TODO: should this be set for the H10? */
 101 //#define HAVE_POWEROFF_WHILE_CHARGING
 102
 103 /* The start address index for ROM builds */
 104 #define ROM_START 0x00000000
 105
 106 /* Define this to the CPU frequency */
 107 /* TODO: this is probably wrong */
 108 #define CPU_FREQ      11289600
 109
 110 /* Type of LCD */
 111 #define CONFIG_LCD LCD_TPJ1022
 112
 113 #define DEFAULT_CONTRAST_SETTING    19
 114
 115 /* Offset ( in the firmware file's header ) to the file length */
 116 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 117
 118 /* Offset ( in the firmware file's header ) to the file CRC */
 119 #define FIRMWARE_OFFSET_FILE_CRC 0
 120
 121 /* Offset ( in the firmware file's header ) to the real data */
 122 #define FIRMWARE_OFFSET_FILE_DATA 8
 123
 124 /* USB On-the-go */
 125 #define CONFIG_USBOTG USBOTG_ARC
 126
 127 /* define this if the unit can be powered or charged via USB */
 128 #define HAVE_USB_POWER
 129
 130 /* enable these for the experimental usb stack ROOLKU */
 131 #define HAVE_USBSTACK
 132 #define USB_VENDOR_ID 0x07B4
 133 #define USB_PRODUCT_ID 0x0280
 134 /* Virtual LED (icon) */
 135 #define CONFIG_LED LED_VIRTUAL
 136
 137 /* Define this if you have adjustable CPU frequency */
 138 #define HAVE_ADJUSTABLE_CPU_FREQ
 139
 140 #define BOOTFILE_EXT "elio"
 141 #define BOOTFILE "rockbox." BOOTFILE_EXT
 142 #define BOOTDIR "/.rockbox"
 143
 144 #endif