firmware/export/config-yh925.h

   1 /*
   2  * This config file is for the Samsung YH-925
   3  */
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 59
   9 #define MODEL_NAME   "Samsung YH-925"
  10
  11 /* define this if you have recording possibility */
  12 /* todo #define HAVE_RECORDING */
  13
  14 /* Define bitmask of input sources - recordable bitmask can be defined
  15    explicitly if different */
  16 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN )
  17
  18 /* define the bitmask of hardware sample rates */
  19 #define HW_SAMPR_CAPS   (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
  20                          SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
  21                          SAMPR_CAP_11 | SAMPR_CAP_8)
  22
  23 /* define the bitmask of recording sample rates */
  24 #define REC_SAMPR_CAPS  (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
  25                          SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
  26                          SAMPR_CAP_11 | SAMPR_CAP_8)
  27
  28 /* Type of LCD */
  29 #define CONFIG_LCD LCD_YH925
  30
  31 /* LCD dimensions */
  32 #define LCD_WIDTH  160
  33 #define LCD_HEIGHT 128
  34 #define LCD_DEPTH  16   /* 65536 colours */
  35 #define LCD_PIXELFORMAT RGB565
  36
  37 /* todo */
  38 /* #ifndef BOOTLOADER */
  39 #if 0
  40 /* Define this if your LCD can be enabled/disabled */
  41 #define HAVE_LCD_ENABLE
  42
  43 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  44  * should be defined as well.
  45  * We can currently put the lcd to sleep but it won't wake up properly */
  46 #define HAVE_LCD_SLEEP
  47 #define HAVE_LCD_SLEEP_SETTING
  48 #endif
  49
  50 /* Define this for LCD backlight available */
  51 #define HAVE_BACKLIGHT
  52
  53 /* Define this if your LCD can set contrast */
  54 #define HAVE_LCD_CONTRAST
  55
  56 #define MIN_CONTRAST_SETTING        0
  57 #define MAX_CONTRAST_SETTING        30
  58 #define DEFAULT_CONTRAST_SETTING    14 /* Match boot contrast */
  59
  60 /* define this if you can flip your LCD */
  61 /* todo #define HAVE_LCD_FLIP */
  62
  63 /* define this if you can invert the colours on your LCD */
  64 /* todo #define HAVE_LCD_INVERT */
  65
  66 /* put the lcd frame buffer in IRAM */
  67 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR */
  68
  69 /* define this if you have a bitmap LCD display */
  70 #define HAVE_LCD_BITMAP
  71
  72 /* define this if you have a colour LCD */
  73 #define HAVE_LCD_COLOR
  74
  75 /* define this if you want album art for this target */
  76 #define HAVE_ALBUMART
  77
  78 /* define this to enable bitmap scaling */
  79 #define HAVE_BMP_SCALING
  80
  81 /* define this to enable JPEG decoding */
  82 #define HAVE_JPEG
  83
  84 /* define this if you have access to the quickscreen */
  85 #define HAVE_QUICKSCREEN
  86
  87 /* define this if you have access to the pitchscreen */
  88 #define HAVE_PITCHSCREEN
  89
  90 /* define this if you would like tagcache to build on this target */
  91 #define HAVE_TAGCACHE
  92
  93 #define CONFIG_KEYPAD SAMSUNG_YH_PAD
  94
  95 /* Define this if you do software codec */
  96 #define CONFIG_CODEC SWCODEC
  97
  98 /* define this if you have a real-time clock */
  99 #ifndef BOOTLOADER
 100 #define CONFIG_RTC RTC_E8564
 101 /* TODO */
 102 //#define HAVE_RTC_ALARM
 103 #endif
 104
 105 /* define this if you have a disk storage, i.e. something
 106    that needs spinups and can cause skips when shaked */
 107 #define HAVE_DISK_STORAGE
 108
 109 /* define this if you use an ATA controller */
 110 #define CONFIG_STORAGE STORAGE_ATA
 111
 112 /* We're able to shut off power to the HDD */
 113 #ifndef SIMULATOR
 114 /* todo #define HAVE_ATA_POWER_OFF */
 115 #endif
 116
 117 /* Define this if you have a software controlled poweroff */
 118 #define HAVE_SW_POWEROFF
 119
 120 /* The number of bytes reserved for loadable codecs */
 121 #define CODEC_SIZE 0x100000
 122
 123 /* The number of bytes reserved for loadable plugins */
 124 #define PLUGIN_BUFFER_SIZE 0x80000
 125
 126 /* Define this if you have the AK4537 audio codec */
 127 #define HAVE_AK4537
 128
 129 /* AK4537 has no tone controls, so we use the software ones */
 130 #define HAVE_SW_TONE_CONTROLS
 131
 132 #define AB_REPEAT_ENABLE 1
 133
 134 #define BATTERY_CAPACITY_DEFAULT 900 /* default battery capacity */
 135 #define BATTERY_CAPACITY_MIN 500  /* min. capacity selectable */
 136 #define BATTERY_CAPACITY_MAX 1150 /* max. capacity selectable */
 137 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 138 #define BATTERY_TYPES_COUNT  1    /* only one type */
 139
 140 /* Hardware controlled charging */
 141 #define CONFIG_CHARGING CHARGING_SIMPLE
 142
 143 /* define this if the unit can be powered or charged via USB */
 144 #define HAVE_USB_POWER
 145
 146 #ifndef SIMULATOR
 147
 148 /* Define this if you have a PortalPlayer PP5020 */
 149 #define CONFIG_CPU PP5020
 150
 151 /* Define this if you want to use the PP5020 i2c interface */
 152 #define CONFIG_I2C I2C_PP5020
 153
 154 /* define this if the hardware can be powered off while charging */
 155 #define HAVE_POWEROFF_WHILE_CHARGING
 156
 157 /* The start address index for ROM builds */
 158 #define ROM_START 0x00000000
 159
 160 /* The size of the flash ROM */
 161 #define FLASH_SIZE 0x100000
 162
 163 /* Define this to the CPU frequency */
 164 #define CPU_FREQ      75000000
 165
 166 /* USB On-the-go */
 167 #define CONFIG_USBOTG USBOTG_ARC
 168
 169 /* enable these for the experimental usb stack */
 170 #define HAVE_USBSTACK
 171 #define USE_ROCKBOX_USB
 172 /* todo - check */
 173 #define USB_VENDOR_ID   0x04e8
 174 #define USB_PRODUCT_ID  0x5024
 175
 176 /* Virtual LED (icon) */
 177 #define CONFIG_LED LED_VIRTUAL
 178
 179 /* Define this if you have adjustable CPU frequency */
 180 #define HAVE_ADJUSTABLE_CPU_FREQ
 181
 182 #define MI4_FORMAT
 183 #define BOOTFILE_EXT    "mi4"
 184 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 185 #define BOOTDIR "/.rockbox"
 186
 187 /* Offset ( in the firmware file's header ) to the file CRC */
 188 #define FIRMWARE_OFFSET_FILE_CRC    0x00
 189
 190 /* Offset ( in the firmware file's header ) to the real data */
 191 #define FIRMWARE_OFFSET_FILE_DATA   0x00
 192
 193 #define ICODE_ATTR_TREMOR_NOT_MDCT
 194
 195 #endif /* !SIMULATOR */