firmware/export/power.h

   1 /***************************************************************************
   2  *             __________               __   ___.
   3  *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4  *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5  *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6  *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7  *                     \/            \/     \/    \/            \/
   8  * $Id$
   9  *
  10  * Copyright (C) 2002 by Linus Nielsen Feltzing
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License
  14  * as published by the Free Software Foundation; either version 2
  15  * of the License, or (at your option) any later version.
  16  *
  17  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  18  * KIND, either express or implied.
  19  *
  20  ****************************************************************************/
  21 #ifndef _POWER_H_
  22 #define _POWER_H_
  23
  24 #if CONFIG_CHARGING
  25 enum power_input_flags {
  26     /* No external power source? Default. */
  27     POWER_INPUT_NONE = 0x00,
  28
  29     /* Main power source is available (AC?), the default other than
  30      * battery if for instance USB and others cannot be distinguished or
  31      * USB is the only possibility. */
  32     POWER_INPUT_MAIN = 0x01,
  33
  34     /* USB power source is available (and is discernable from MAIN). */
  35     POWER_INPUT_USB  = 0x02,
  36
  37     /* Something is plugged. */
  38     POWER_INPUT = 0x0f,
  39
  40     /* POWER_INPUT_*_CHARGER of course implies presence of the respective
  41      * power source. */
  42
  43     /* Battery not included in CHARGER (it can't charge itself) */
  44
  45     /* Charging is possible on main. */
  46     POWER_INPUT_MAIN_CHARGER = 0x10 | POWER_INPUT_MAIN,
  47
  48     /* Charging is possible on USB. */
  49     POWER_INPUT_USB_CHARGER = 0x20 | POWER_INPUT_USB,
  50
  51     /* Charging is possible from something. */
  52     POWER_INPUT_CHARGER = 0xf0,
  53
  54 #ifdef HAVE_BATTERY_SWITCH
  55     /* Battery is powering device or is available to power device. It
  56      * could also be used if the battery is hot-swappable to indicate if
  57      * it is present ("switch" as verb vs. noun). */
  58     POWER_INPUT_BATTERY = 0x100,
  59 #endif
  60 };
  61
  62 /* Returns detailed power input status information from device. */
  63 unsigned int power_input_status(void);
  64
  65 /* Shortcuts */
  66 /* Returns true if any power source that is connected is capable of
  67  * charging the batteries.
  68  * > (power_input_status() & POWER_INPUT_CHARGER) != 0 */
  69 bool charger_inserted(void);
  70
  71 /* Returns true if any power input is connected - charging-capable
  72  * or not.
  73  * > (power_input_status() & POWER_INPUT) != 0 */
  74 bool power_input_present(void);
  75 #endif /* CONFIG_CHARGING */
  76
  77 void power_off(void);
  78 void ide_power_enable(bool on);
  79
  80 #if CONFIG_CHARGING >= CHARGING_MONITOR
  81 bool charging_state(void);
  82 #endif
  83
  84 #ifndef SIMULATOR
  85
  86 void power_init(void);
  87
  88 bool ide_powered(void);
  89 #endif
  90
  91 #ifdef HAVE_SPDIF_POWER
  92 void spdif_power_enable(bool on);
  93 bool spdif_powered(void);
  94 #endif
  95
  96 #if CONFIG_TUNER
  97 bool tuner_power(bool status);
  98 bool tuner_powered(void);
  99 #endif
 100
 101 #endif /* _POWER_H_ */