kvm: qemu: propagate errors on failed migration.
[kvm-userspace.git] / qemu / hw / ppce500_pci.c
blob547218fabc152db9a93fa41013078d64cb7f178b
1 /*
2 * QEMU PowerPC E500 embedded processors pci controller emulation
4 * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved.
6 * Author: Yu Liu, <yu.liu@freescale.com>
8 * This file is derived from hw/ppc4xx_pci.c,
9 * the copyright for that material belongs to the original owners.
11 * This is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
17 #include "hw.h"
18 #include "ppc.h"
19 #include "ppce500.h"
20 typedef target_phys_addr_t pci_addr_t;
21 #include "pci.h"
22 #include "pci_host.h"
23 #include "bswap.h"
24 #include "qemu-log.h"
26 #ifdef DEBUG_PCI
27 #define pci_debug(fmt, arg...) fprintf(stderr, fmt, ##arg)
28 #else
29 #define pci_debug(fmt, arg...)
30 #endif
32 #define PCIE500_CFGADDR 0x0
33 #define PCIE500_CFGDATA 0x4
34 #define PCIE500_REG_BASE 0xC00
35 #define PCIE500_REG_SIZE (0x1000 - PCIE500_REG_BASE)
37 #define PPCE500_PCI_CONFIG_ADDR 0x0
38 #define PPCE500_PCI_CONFIG_DATA 0x4
39 #define PPCE500_PCI_INTACK 0x8
41 #define PPCE500_PCI_OW1 (0xC20 - PCIE500_REG_BASE)
42 #define PPCE500_PCI_OW2 (0xC40 - PCIE500_REG_BASE)
43 #define PPCE500_PCI_OW3 (0xC60 - PCIE500_REG_BASE)
44 #define PPCE500_PCI_OW4 (0xC80 - PCIE500_REG_BASE)
45 #define PPCE500_PCI_IW3 (0xDA0 - PCIE500_REG_BASE)
46 #define PPCE500_PCI_IW2 (0xDC0 - PCIE500_REG_BASE)
47 #define PPCE500_PCI_IW1 (0xDE0 - PCIE500_REG_BASE)
49 #define PPCE500_PCI_GASKET_TIMR (0xE20 - PCIE500_REG_BASE)
51 #define PCI_POTAR 0x0
52 #define PCI_POTEAR 0x4
53 #define PCI_POWBAR 0x8
54 #define PCI_POWAR 0x10
56 #define PCI_PITAR 0x0
57 #define PCI_PIWBAR 0x8
58 #define PCI_PIWBEAR 0xC
59 #define PCI_PIWAR 0x10
61 #define PPCE500_PCI_NR_POBS 5
62 #define PPCE500_PCI_NR_PIBS 3
64 struct pci_outbound {
65 uint32_t potar;
66 uint32_t potear;
67 uint32_t powbar;
68 uint32_t powar;
71 struct pci_inbound {
72 uint32_t pitar;
73 uint32_t piwbar;
74 uint32_t piwbear;
75 uint32_t piwar;
78 struct PPCE500PCIState {
79 struct pci_outbound pob[PPCE500_PCI_NR_POBS];
80 struct pci_inbound pib[PPCE500_PCI_NR_PIBS];
81 uint32_t gasket_time;
82 PCIHostState pci_state;
83 PCIDevice *pci_dev;
86 typedef struct PPCE500PCIState PPCE500PCIState;
88 static uint32_t pcie500_cfgaddr_readl(void *opaque, target_phys_addr_t addr)
90 PPCE500PCIState *pci = opaque;
92 pci_debug("%s: (addr:%Lx) -> value:%x\n", __func__, addr,
93 pci->pci_state.config_reg);
94 return pci->pci_state.config_reg;
97 static CPUReadMemoryFunc *pcie500_cfgaddr_read[] = {
98 &pcie500_cfgaddr_readl,
99 &pcie500_cfgaddr_readl,
100 &pcie500_cfgaddr_readl,
103 static void pcie500_cfgaddr_writel(void *opaque, target_phys_addr_t addr,
104 uint32_t value)
106 PPCE500PCIState *controller = opaque;
108 pci_debug("%s: value:%x -> (addr%Lx)\n", __func__, value, addr);
109 controller->pci_state.config_reg = value & ~0x3;
112 static CPUWriteMemoryFunc *pcie500_cfgaddr_write[] = {
113 &pcie500_cfgaddr_writel,
114 &pcie500_cfgaddr_writel,
115 &pcie500_cfgaddr_writel,
118 static CPUReadMemoryFunc *pcie500_cfgdata_read[] = {
119 &pci_host_data_readb,
120 &pci_host_data_readw,
121 &pci_host_data_readl,
124 static CPUWriteMemoryFunc *pcie500_cfgdata_write[] = {
125 &pci_host_data_writeb,
126 &pci_host_data_writew,
127 &pci_host_data_writel,
130 static uint32_t pci_reg_read4(void *opaque, target_phys_addr_t addr)
132 PPCE500PCIState *pci = opaque;
133 unsigned long win;
134 uint32_t value = 0;
136 win = addr & 0xfe0;
138 switch (win) {
139 case PPCE500_PCI_OW1:
140 case PPCE500_PCI_OW2:
141 case PPCE500_PCI_OW3:
142 case PPCE500_PCI_OW4:
143 switch (addr & 0xC) {
144 case PCI_POTAR: value = pci->pob[(addr >> 5) & 0x7].potar; break;
145 case PCI_POTEAR: value = pci->pob[(addr >> 5) & 0x7].potear; break;
146 case PCI_POWBAR: value = pci->pob[(addr >> 5) & 0x7].powbar; break;
147 case PCI_POWAR: value = pci->pob[(addr >> 5) & 0x7].powar; break;
148 default: break;
150 break;
152 case PPCE500_PCI_IW3:
153 case PPCE500_PCI_IW2:
154 case PPCE500_PCI_IW1:
155 switch (addr & 0xC) {
156 case PCI_PITAR: value = pci->pib[(addr >> 5) & 0x3].pitar; break;
157 case PCI_PIWBAR: value = pci->pib[(addr >> 5) & 0x3].piwbar; break;
158 case PCI_PIWBEAR: value = pci->pib[(addr >> 5) & 0x3].piwbear; break;
159 case PCI_PIWAR: value = pci->pib[(addr >> 5) & 0x3].piwar; break;
160 default: break;
162 break;
164 case PPCE500_PCI_GASKET_TIMR:
165 value = pci->gasket_time;
166 break;
168 default:
169 break;
172 pci_debug("%s: win:%lx(addr:%Lx) -> value:%x\n",__func__,win,addr,value);
173 return value;
176 static CPUReadMemoryFunc *e500_pci_reg_read[] = {
177 &pci_reg_read4,
178 &pci_reg_read4,
179 &pci_reg_read4,
182 static void pci_reg_write4(void *opaque, target_phys_addr_t addr,
183 uint32_t value)
185 PPCE500PCIState *pci = opaque;
186 unsigned long win;
188 win = addr & 0xfe0;
190 pci_debug("%s: value:%x -> win:%lx(addr:%Lx)\n",__func__,value,win,addr);
192 switch (win) {
193 case PPCE500_PCI_OW1:
194 case PPCE500_PCI_OW2:
195 case PPCE500_PCI_OW3:
196 case PPCE500_PCI_OW4:
197 switch (addr & 0xC) {
198 case PCI_POTAR: pci->pob[(addr >> 5) & 0x7].potar = value; break;
199 case PCI_POTEAR: pci->pob[(addr >> 5) & 0x7].potear = value; break;
200 case PCI_POWBAR: pci->pob[(addr >> 5) & 0x7].powbar = value; break;
201 case PCI_POWAR: pci->pob[(addr >> 5) & 0x7].powar = value; break;
202 default: break;
204 break;
206 case PPCE500_PCI_IW3:
207 case PPCE500_PCI_IW2:
208 case PPCE500_PCI_IW1:
209 switch (addr & 0xC) {
210 case PCI_PITAR: pci->pib[(addr >> 5) & 0x3].pitar = value; break;
211 case PCI_PIWBAR: pci->pib[(addr >> 5) & 0x3].piwbar = value; break;
212 case PCI_PIWBEAR: pci->pib[(addr >> 5) & 0x3].piwbear = value; break;
213 case PCI_PIWAR: pci->pib[(addr >> 5) & 0x3].piwar = value; break;
214 default: break;
216 break;
218 case PPCE500_PCI_GASKET_TIMR:
219 pci->gasket_time = value;
220 break;
222 default:
223 break;
227 static CPUWriteMemoryFunc *e500_pci_reg_write[] = {
228 &pci_reg_write4,
229 &pci_reg_write4,
230 &pci_reg_write4,
233 static int mpc85xx_pci_map_irq(PCIDevice *pci_dev, int irq_num)
235 int devno = pci_dev->devfn >> 3, ret = 0;
237 switch (devno) {
238 /* Two PCI slot */
239 case 0x11:
240 case 0x12:
241 ret = (irq_num + devno - 0x10) % 4;
242 break;
243 default:
244 printf("Error:%s:unknow dev number\n", __func__);
247 pci_debug("%s: devfn %x irq %d -> %d devno:%x\n", __func__,
248 pci_dev->devfn, irq_num, ret, devno);
250 return ret;
253 static void mpc85xx_pci_set_irq(qemu_irq *pic, int irq_num, int level)
255 pci_debug("%s: PCI irq %d, level:%d\n", __func__, irq_num, level);
257 qemu_set_irq(pic[irq_num], level);
260 static void ppce500_pci_save(QEMUFile *f, void *opaque)
262 PPCE500PCIState *controller = opaque;
263 int i;
265 pci_device_save(controller->pci_dev, f);
267 for (i = 0; i < PPCE500_PCI_NR_POBS; i++) {
268 qemu_put_be32s(f, &controller->pob[i].potar);
269 qemu_put_be32s(f, &controller->pob[i].potear);
270 qemu_put_be32s(f, &controller->pob[i].powbar);
271 qemu_put_be32s(f, &controller->pob[i].powar);
274 for (i = 0; i < PPCE500_PCI_NR_PIBS; i++) {
275 qemu_put_be32s(f, &controller->pib[i].pitar);
276 qemu_put_be32s(f, &controller->pib[i].piwbar);
277 qemu_put_be32s(f, &controller->pib[i].piwbear);
278 qemu_put_be32s(f, &controller->pib[i].piwar);
280 qemu_put_be32s(f, &controller->gasket_time);
283 static int ppce500_pci_load(QEMUFile *f, void *opaque, int version_id)
285 PPCE500PCIState *controller = opaque;
286 int i;
288 if (version_id != 1)
289 return -EINVAL;
291 pci_device_load(controller->pci_dev, f);
293 for (i = 0; i < PPCE500_PCI_NR_POBS; i++) {
294 qemu_get_be32s(f, &controller->pob[i].potar);
295 qemu_get_be32s(f, &controller->pob[i].potear);
296 qemu_get_be32s(f, &controller->pob[i].powbar);
297 qemu_get_be32s(f, &controller->pob[i].powar);
300 for (i = 0; i < PPCE500_PCI_NR_PIBS; i++) {
301 qemu_get_be32s(f, &controller->pib[i].pitar);
302 qemu_get_be32s(f, &controller->pib[i].piwbar);
303 qemu_get_be32s(f, &controller->pib[i].piwbear);
304 qemu_get_be32s(f, &controller->pib[i].piwar);
306 qemu_get_be32s(f, &controller->gasket_time);
308 return 0;
311 PCIBus *ppce500_pci_init(qemu_irq pci_irqs[4], target_phys_addr_t registers)
313 PPCE500PCIState *controller;
314 PCIDevice *d;
315 int index;
316 static int ppce500_pci_id;
318 controller = qemu_mallocz(sizeof(PPCE500PCIState));
320 controller->pci_state.bus = pci_register_bus(mpc85xx_pci_set_irq,
321 mpc85xx_pci_map_irq,
322 pci_irqs, 0x88, 4);
323 d = pci_register_device(controller->pci_state.bus,
324 "host bridge", sizeof(PCIDevice),
325 0, NULL, NULL);
327 pci_config_set_vendor_id(d->config, PCI_VENDOR_ID_FREESCALE);
328 pci_config_set_device_id(d->config, PCI_DEVICE_ID_MPC8533E);
329 pci_config_set_class(d->config, PCI_CLASS_PROCESSOR_POWERPC);
331 controller->pci_dev = d;
333 /* CFGADDR */
334 index = cpu_register_io_memory(0, pcie500_cfgaddr_read,
335 pcie500_cfgaddr_write, controller);
336 if (index < 0)
337 goto free;
338 cpu_register_physical_memory(registers + PCIE500_CFGADDR, 4, index);
340 /* CFGDATA */
341 index = cpu_register_io_memory(0, pcie500_cfgdata_read,
342 pcie500_cfgdata_write,
343 &controller->pci_state);
344 if (index < 0)
345 goto free;
346 cpu_register_physical_memory(registers + PCIE500_CFGDATA, 4, index);
348 index = cpu_register_io_memory(0, e500_pci_reg_read,
349 e500_pci_reg_write, controller);
350 if (index < 0)
351 goto free;
352 cpu_register_physical_memory(registers + PCIE500_REG_BASE,
353 PCIE500_REG_SIZE, index);
355 /* XXX load/save code not tested. */
356 register_savevm("ppce500_pci", ppce500_pci_id++, 1,
357 ppce500_pci_save, ppce500_pci_load, controller);
359 return controller->pci_state.bus;
361 free:
362 printf("%s error\n", __func__);
363 qemu_free(controller);
364 return NULL;