latex2e-20150101/support/test2e.tex

   1 % \iffalse meta-comment
   2 %
   3 % Copyright (C) 1992-1994 by David Carlisle, Frank Mittelbach.
   4 % All rights reserved.
   5 %
   6 % This file is part of the validate package.
   7 %
   8 % IMPORTANT NOTICE:
   9 %
  10 % You are not allowed to change this file.  In case of error
  11 % write to the email address mentioned in the file readme.val.
  12 %
  13 % \fi
  14 %                  test2e.tex
  15                    %%%%%%%%%%%
  16
  17 % David Carlisle
  18 % Version 0.0,  28 May 1992
  19 % Version 0.1,  18 Jun 1992 FMi small updates
  20 % Version 1.0a, 28 Jun 1992 FMi small updates for distribution
  21 % Version 1.0b, 1993/12/08  DPC update for LaTeX2e
  22 % Version 1.0e, add config file.
  23 % Version 1.0f, drop \errorstopmode from \loggingoutput
  24
  25 % \def\fileversion{v1.0e}
  26 % \def\filedate{1994/05/19}
  27
  28 % This file should not be used as a package or class file,
  29 % it should be \input.
  30
  31 % The scope of this \makeatletter will then be the rest of the
  32 % document.  Put TeX into scroll mode, and stop it showing the
  33 % implementation details of macros in error messages.
  34 %
  35 \makeatletter
  36 \scrollmode
  37 \errorcontextlines=-1
  38
  39 % Use the same \showbox settings as 2.09, unless they are changed in
  40 % the test file. (2e sets these to -1)
  41 \showboxbreadth=5
  42 \showboxdepth=3
  43
  44
  45 % drop \errorstopmode from \logginoutput so that testing doesn't stop
  46 % for \showoutput
  47 \gdef\loggingoutput{\tracingoutput\@ne
  48     \showboxbreadth\maxdimen\showboxdepth\maxdimen}
  49
  50
  51 % Start the test, after the optional \documentclass (or \documentstyle)
  52 % \begin{document} commands with \START.  All lines in the .log file
  53 % before this will be ignored. It also prints a docstrip-style
  54 % character table in the .tlg file so the .tlg file can easily be
  55 % checked for email translations.
  56 %
  57 \def\START{\typeout{START-TEST-LOG^^J^^J%
  58    This is a generated file for the LaTeX2e validation system.%
  59 ^^J^^JDon't change this file in any respect.%
  60 ^^J^^J\CTable^^J}}
  61
  62 \begingroup
  63 \catcode`\^^\=0
  64 \catcode`\^^A=\catcode`\%
  65 ^^\catcode`^^\ =11
  66 ^^\catcode`^^\%=11
  67 ^^\catcode`^^\#=11
  68 ^^\catcode`^^\~=11
  69 ^^\endlinechar=`^^\^^J
  70 ^^\catcode`^^\\=11^^A
  71 ^^\gdef^^\CTable{
  72 %% \CharacterTable
  73 %%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
  74 %%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
  75 %%   Digits        \0\1\2\3\4\5\6\7\8\9
  76 %%   Exclamation   \!     Double quote  \"     Hash (number) \#
  77 %%   Dollar        \$     Percent       \%     Ampersand     \&
  78 %%   Acute accent  \'     Left paren    \(     Right paren   \)
  79 %%   Asterisk      \*     Plus          \+     Comma         \,
  80 %%   Minus         \-     Point         \.     Solidus       \/
  81 %%   Colon         \:     Semicolon     \;     Less than     \<
  82 %%   Equals        \=     Greater than  \>     Question mark \?
  83 %%   Commercial at \@     Left bracket  \[     Backslash     \\
  84 %%   Right bracket \]     Circumflex    \^     Underscore    \_
  85 %%   Grave accent  \`     Left brace    \{     Vertical bar  \|
  86 %%   Right brace   \}     Tilde         \~}
  87 %%
  88 }^^A
  89 ^^\endgroup{}%
  90
  91 % The test should end with
  92 % \END or \end{document}
  93 %
  94 \let\@@@end\@@end
  95 %\let\@ED=\enddocument
  96 \def\END{\typeout{END-TEST-LOG}\@@@end}
  97 \let\@@end\END
  98
  99
 100 % After the \START should come declarations of the format and style
 101 % options being used.
 102 %
 103 \def\FORMAT#1{\typeout{Format: #1}%
 104   \def\@tempa{#1}\ifx\@tempa\@EJ\else
 105    \OMIT\@warning{Declared format #1,^^JActual format \@EJ}\TIMO\fi}
 106
 107 % The old version got this information from everyjob,
 108 % but that does not work with LaTeX2e as \everyjob is cleared.
 109 \edef\@EJ{\fmtname <\fmtversion>}
 110
 111 % Some author info:
 112 \def\AUTHOR#1{\typeout{Author: #1}}
 113 \def\ADDRESS#1{\typeout{Address: #1}}
 114
 115 % Not all packages declare themselves to the log file, and we can not
 116 % rely on TeX`s output as it includes full path names, and does not
 117 % include version numbers etc.  So for each package included give a
 118 % declaration like: \PACKAGES{array v2.0d}
 119 %
 120 \def\STYLE#1{\typeout{Main Style: #1}}%
 121 \def\STYLEOPTIONS#1{\typeout{Style Options: #1}}
 122
 123
 124 % If The class or package is loaded with options, you may
 125 % specify the options in the \CLASS (\PACKAGE) declaration. eg:
 126 %
 127 % \CLASS[german,a4page]{article v2.0 1994/01/02}
 128 % \PACKAGE{ifthen v2.2 1993/11/12}
 129 % \PACKAGE[dvips]{graphics v 3.8 1994/02/02}
 130 %
 131 \def\CLASS{\@ifnextchar[\OPTCLASS\XCLASS}
 132 \def\OPTCLASS[#1]#2{%
 133   \typeout{Main Class: #2^^J\@spaces Options: #1}}
 134 \def\XCLASS#1{%
 135   \typeout{Main Class: #1}}
 136
 137 \def\PACKAGE{\@ifnextchar[\OPTPACKAGE\XPACKAGE}
 138 \def\OPTPACKAGE[#1]#2{%
 139   \typeout{Package: #2^^J\@spaces Options: #1}}
 140 \def\XPACKAGE#1{%
 141   \typeout{Package: #1}}
 142
 143
 144
 145 % LaTeX2e always uses NFSS2 so new test files need not use
 146 % \FONTSELECTION but it is retained for compatibility for test files
 147 % written for 209/NFSS1.
 148 %
 149 \def\FONTSELECTION#1{%
 150   \OMIT\@@warning{\noexpand\FONTSELECTION obsolete.^^J%
 151                  LaTeX2e always uses NFSS2}\TIMO
 152   \typeout{Font Selection: #1}}
 153
 154
 155
 156 % Surround commands which produce irrelevant lines in the .log file by
 157 % \OMIT
 158 % \TIMO
 159 %
 160 \def\OMIT{\typeout{OMIT}}
 161 \def\TIMO{\typeout{TIMO}}
 162
 163 % After the above declarations, and before the main tests, you may
 164 % optionally `declare' all the commands in the `module' that you are
 165 % about to test. These commands will be registered as defined,
 166 % undefined or relaxed (ie \let to \relax). You may wish to declare
 167 % commands not currently implemented, so that if they are added at a
 168 % later stage, the test will fail, reminding someone to document the
 169 % fact that the user interface has changed. So if you are testing
 170 % array and tabular environments, you may wish do declare
 171 % \extrarowheight. This is undefined in the curent latex, but would
 172 % become defined if Mittelbach's array.sty was incorporated into
 173 % latex.tex.
 174 %
 175 \def\declare@command#1{%
 176   \ifx#1\@undefined\typeout{Undefined \string#1}\else
 177   \ifx#1\relax\typeout{Relaxed \space\space\string#1}\else
 178          \typeout{Defined \space\space\string#1}\fi\fi}
 179
 180
 181 % To allow testing of possible changes, we allow extra code to be read
 182 % in before the test starts. The necessary code should be placed in a
 183 % file test2e.cfg.
 184 %
 185 \OMIT
 186 \InputIfFileExists{test2e.cfg}
 187       {\typeout{^^J***^^Jtest2e.cfg in operation^^J***^^J}}{}
 188 \TIMO
 189
 190 \endinput