doc: Mobile key authentication

[libisds.git] / ltmain.sh

#! /bin/sh
## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
##               by inline-source v2014-01-03.01

# libtool (GNU libtool) 2.4.6
# Provide generalized library-building support services.
# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996

# Copyright (C) 1996-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions.  There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# As a special exception to the GNU General Public License,
# if you distribute this file as part of a program or library that
# is built using GNU Libtool, you may include this file under the
# same distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.


PROGRAM=libtool
PACKAGE=libtool
VERSION=2.4.6
package_revision=2.4.6


## ------ ##
## Usage. ##
## ------ ##

# Run './libtool --help' for help with using this script from the
# command line.


## ------------------------------- ##
## User overridable command paths. ##
## ------------------------------- ##

# After configure completes, it has a better idea of some of the
# shell tools we need than the defaults used by the functions shared
# with bootstrap, so set those here where they can still be over-
# ridden by the user, but otherwise take precedence.

: ${AUTOCONF="autoconf"}
: ${AUTOMAKE="automake"}


## -------------------------- ##
## Source external libraries. ##
## -------------------------- ##

# Much of our low-level functionality needs to be sourced from external
# libraries, which are installed to $pkgauxdir.

# Set a version string for this script.
scriptversion=2015-01-20.17; # UTC

# General shell script boiler plate, and helper functions.
# Written by Gary V. Vaughan, 2004

# Copyright (C) 2004-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions.  There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.

# As a special exception to the GNU General Public License, if you distribute
# this file as part of a program or library that is built using GNU Libtool,
# you may include this file under the same distribution terms that you use
# for the rest of that program.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.

# Please report bugs or propose patches to gary@gnu.org.


## ------ ##
## Usage. ##
## ------ ##

# Evaluate this file near the top of your script to gain access to
# the functions and variables defined here:
#
#   . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
#
# If you need to override any of the default environment variable
# settings, do that before evaluating this file.


## -------------------- ##
## Shell normalisation. ##
## -------------------- ##

# Some shells need a little help to be as Bourne compatible as possible.
# Before doing anything else, make sure all that help has been provided!

DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
  emulate sh
  NULLCMD=:
  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
fi

# NLS nuisances: We save the old values in case they are required later.
_G_user_locale=
_G_safe_locale=
for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
  eval "if test set = \"\${$_G_var+set}\"; then
          save_$_G_var=\$$_G_var
          $_G_var=C
          export $_G_var
          _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
          _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
        fi"
done

# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

# Make sure IFS has a sensible default
sp=' '
nl='
'
IFS="$sp        $nl"

# There are apparently some retarded systems that use ';' as a PATH separator!
if test "${PATH_SEPARATOR+set}" != set; then
  PATH_SEPARATOR=:
  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
      PATH_SEPARATOR=';'
  }
fi



## ------------------------- ##
## Locate command utilities. ##
## ------------------------- ##


# func_executable_p FILE
# ----------------------
# Check that FILE is an executable regular file.
func_executable_p ()
{
    test -f "$1" && test -x "$1"
}


# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
# --------------------------------------------
# Search for either a program that responds to --version with output
# containing "GNU", or else returned by CHECK_FUNC otherwise, by
# trying all the directories in PATH with each of the elements of
# PROGS_LIST.
#
# CHECK_FUNC should accept the path to a candidate program, and
# set $func_check_prog_result if it truncates its output less than
# $_G_path_prog_max characters.
func_path_progs ()
{
    _G_progs_list=$1
    _G_check_func=$2
    _G_PATH=${3-"$PATH"}

    _G_path_prog_max=0
    _G_path_prog_found=false
    _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
    for _G_dir in $_G_PATH; do
      IFS=$_G_save_IFS
      test -z "$_G_dir" && _G_dir=.
      for _G_prog_name in $_G_progs_list; do
        for _exeext in '' .EXE; do
          _G_path_prog=$_G_dir/$_G_prog_name$_exeext
          func_executable_p "$_G_path_prog" || continue
          case `"$_G_path_prog" --version 2>&1` in
            *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
            *)     $_G_check_func $_G_path_prog
                   func_path_progs_result=$func_check_prog_result
                   ;;
          esac
          $_G_path_prog_found && break 3
        done
      done
    done
    IFS=$_G_save_IFS
    test -z "$func_path_progs_result" && {
      echo "no acceptable sed could be found in \$PATH" >&2
      exit 1
    }
}


# We want to be able to use the functions in this file before configure
# has figured out where the best binaries are kept, which means we have
# to search for them ourselves - except when the results are already set
# where we skip the searches.

# Unless the user overrides by setting SED, search the path for either GNU
# sed, or the sed that truncates its output the least.
test -z "$SED" && {
  _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
  for _G_i in 1 2 3 4 5 6 7; do
    _G_sed_script=$_G_sed_script$nl$_G_sed_script
  done
  echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
  _G_sed_script=

  func_check_prog_sed ()
  {
    _G_path_prog=$1

    _G_count=0
    printf 0123456789 >conftest.in
    while :
    do
      cat conftest.in conftest.in >conftest.tmp
      mv conftest.tmp conftest.in
      cp conftest.in conftest.nl
      echo '' >> conftest.nl
      "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
      diff conftest.out conftest.nl >/dev/null 2>&1 || break
      _G_count=`expr $_G_count + 1`
      if test "$_G_count" -gt "$_G_path_prog_max"; then
        # Best one so far, save it but keep looking for a better one
        func_check_prog_result=$_G_path_prog
        _G_path_prog_max=$_G_count
      fi
      # 10*(2^10) chars as input seems more than enough
      test 10 -lt "$_G_count" && break
    done
    rm -f conftest.in conftest.tmp conftest.nl conftest.out
  }

  func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
  rm -f conftest.sed
  SED=$func_path_progs_result
}


# Unless the user overrides by setting GREP, search the path for either GNU
# grep, or the grep that truncates its output the least.
test -z "$GREP" && {
  func_check_prog_grep ()
  {
    _G_path_prog=$1

    _G_count=0
    _G_path_prog_max=0
    printf 0123456789 >conftest.in
    while :
    do
      cat conftest.in conftest.in >conftest.tmp
      mv conftest.tmp conftest.in
      cp conftest.in conftest.nl
      echo 'GREP' >> conftest.nl
      "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
      diff conftest.out conftest.nl >/dev/null 2>&1 || break
      _G_count=`expr $_G_count + 1`
      if test "$_G_count" -gt "$_G_path_prog_max"; then
        # Best one so far, save it but keep looking for a better one
        func_check_prog_result=$_G_path_prog
        _G_path_prog_max=$_G_count
      fi
      # 10*(2^10) chars as input seems more than enough
      test 10 -lt "$_G_count" && break
    done
    rm -f conftest.in conftest.tmp conftest.nl conftest.out
  }

  func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
  GREP=$func_path_progs_result
}


## ------------------------------- ##
## User overridable command paths. ##
## ------------------------------- ##

# All uppercase variable names are used for environment variables.  These
# variables can be overridden by the user before calling a script that
# uses them if a suitable command of that name is not already available
# in the command search PATH.

: ${CP="cp -f"}
: ${ECHO="printf %s\n"}
: ${EGREP="$GREP -E"}
: ${FGREP="$GREP -F"}
: ${LN_S="ln -s"}
: ${MAKE="make"}
: ${MKDIR="mkdir"}
: ${MV="mv -f"}
: ${RM="rm -f"}
: ${SHELL="${CONFIG_SHELL-/bin/sh}"}


## -------------------- ##
## Useful sed snippets. ##
## -------------------- ##

sed_dirname='s|/[^/]*$||'
sed_basename='s|^.*/||'

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
sed_quote_subst='s|\([`"$\\]\)|\\\1|g'

# Same as above, but do not quote variable references.
sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'

# Sed substitution that turns a string into a regex matching for the
# string literally.
sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'

# Sed substitution that converts a w32 file name or path
# that contains forward slashes, into one that contains
# (escaped) backslashes.  A very naive implementation.
sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'

# Re-'\' parameter expansions in output of sed_double_quote_subst that
# were '\'-ed in input to the same.  If an odd number of '\' preceded a
# '$' in input to sed_double_quote_subst, that '$' was protected from
# expansion.  Since each input '\' is now two '\'s, look for any number
# of runs of four '\'s followed by two '\'s and then a '$'.  '\' that '$'.
_G_bs='\\'
_G_bs2='\\\\'
_G_bs4='\\\\\\\\'
_G_dollar='\$'
sed_double_backslash="\
  s/$_G_bs4/&\\
/g
  s/^$_G_bs2$_G_dollar/$_G_bs&/
  s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
  s/\n//g"


## ----------------- ##
## Global variables. ##
## ----------------- ##

# Except for the global variables explicitly listed below, the following
# functions in the '^func_' namespace, and the '^require_' namespace
# variables initialised in the 'Resource management' section, sourcing
# this file will not pollute your global namespace with anything
# else. There's no portable way to scope variables in Bourne shell
# though, so actually running these functions will sometimes place
# results into a variable named after the function, and often use
# temporary variables in the '^_G_' namespace. If you are careful to
# avoid using those namespaces casually in your sourcing script, things
# should continue to work as you expect. And, of course, you can freely
# overwrite any of the functions or variables defined here before
# calling anything to customize them.

EXIT_SUCCESS=0
EXIT_FAILURE=1
EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
EXIT_SKIP=77      # $? = 77 is used to indicate a skipped test to automake.

# Allow overriding, eg assuming that you follow the convention of
# putting '$debug_cmd' at the start of all your functions, you can get
# bash to show function call trace with:
#
#    debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
debug_cmd=${debug_cmd-":"}
exit_cmd=:

# By convention, finish your script with:
#
#    exit $exit_status
#
# so that you can set exit_status to non-zero if you want to indicate
# something went wrong during execution without actually bailing out at
# the point of failure.
exit_status=$EXIT_SUCCESS

# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
# positional parameter $0, within a function call, is the name of the
# function.
progpath=$0

# The name of this program.
progname=`$ECHO "$progpath" |$SED "$sed_basename"`

# Make sure we have an absolute progpath for reexecution:
case $progpath in
  [\\/]*|[A-Za-z]:\\*) ;;
  *[\\/]*)
     progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
     progdir=`cd "$progdir" && pwd`
     progpath=$progdir/$progname
     ;;
  *)
     _G_IFS=$IFS
     IFS=${PATH_SEPARATOR-:}
     for progdir in $PATH; do
       IFS=$_G_IFS
       test -x "$progdir/$progname" && break
     done
     IFS=$_G_IFS
     test -n "$progdir" || progdir=`pwd`
     progpath=$progdir/$progname
     ;;
esac


## ----------------- ##
## Standard options. ##
## ----------------- ##

# The following options affect the operation of the functions defined
# below, and should be set appropriately depending on run-time para-
# meters passed on the command line.

opt_dry_run=false
opt_quiet=false
opt_verbose=false

# Categories 'all' and 'none' are always available.  Append any others
# you will pass as the first argument to func_warning from your own
# code.
warning_categories=

# By default, display warnings according to 'opt_warning_types'.  Set
# 'warning_func'  to ':' to elide all warnings, or func_fatal_error to
# treat the next displayed warning as a fatal error.
warning_func=func_warn_and_continue

# Set to 'all' to display all warnings, 'none' to suppress all
# warnings, or a space delimited list of some subset of
# 'warning_categories' to display only the listed warnings.
opt_warning_types=all


## -------------------- ##
## Resource management. ##
## -------------------- ##

# This section contains definitions for functions that each ensure a
# particular resource (a file, or a non-empty configuration variable for
# example) is available, and if appropriate to extract default values
# from pertinent package files. Call them using their associated
# 'require_*' variable to ensure that they are executed, at most, once.
#
# It's entirely deliberate that calling these functions can set
# variables that don't obey the namespace limitations obeyed by the rest
# of this file, in order that that they be as useful as possible to
# callers.


# require_term_colors
# -------------------
# Allow display of bold text on terminals that support it.
require_term_colors=func_require_term_colors
func_require_term_colors ()
{
    $debug_cmd

    test -t 1 && {
      # COLORTERM and USE_ANSI_COLORS environment variables take
      # precedence, because most terminfo databases neglect to describe
      # whether color sequences are supported.
      test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}

      if test 1 = "$USE_ANSI_COLORS"; then
        # Standard ANSI escape sequences
        tc_reset='\e[0m'
        tc_bold='\e[1m';   tc_standout='\e[7m'
        tc_red='\e[31m';   tc_green='\e[32m'
        tc_blue='\e[34m';  tc_cyan='\e[36m'
      else
        # Otherwise trust the terminfo database after all.
        test -n "`tput sgr0 2>/dev/null`" && {
          tc_reset=`tput sgr0`
          test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
          tc_standout=$tc_bold
          test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
          test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
          test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
          test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
          test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
        }
      fi
    }

    require_term_colors=:
}


## ----------------- ##
## Function library. ##
## ----------------- ##

# This section contains a variety of useful functions to call in your
# scripts. Take note of the portable wrappers for features provided by
# some modern shells, which will fall back to slower equivalents on
# less featureful shells.


# func_append VAR VALUE
# ---------------------
# Append VALUE onto the existing contents of VAR.

  # We should try to minimise forks, especially on Windows where they are
  # unreasonably slow, so skip the feature probes when bash or zsh are
  # being used:
  if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
    : ${_G_HAVE_ARITH_OP="yes"}
    : ${_G_HAVE_XSI_OPS="yes"}
    # The += operator was introduced in bash 3.1
    case $BASH_VERSION in
      [12].* | 3.0 | 3.0*) ;;
      *)
        : ${_G_HAVE_PLUSEQ_OP="yes"}
        ;;
    esac
  fi

  # _G_HAVE_PLUSEQ_OP
  # Can be empty, in which case the shell is probed, "yes" if += is
  # useable or anything else if it does not work.
  test -z "$_G_HAVE_PLUSEQ_OP" \
    && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
    && _G_HAVE_PLUSEQ_OP=yes

if test yes = "$_G_HAVE_PLUSEQ_OP"
then
  # This is an XSI compatible shell, allowing a faster implementation...
  eval 'func_append ()
  {
    $debug_cmd

    eval "$1+=\$2"
  }'
else
  # ...otherwise fall back to using expr, which is often a shell builtin.
  func_append ()
  {
    $debug_cmd

    eval "$1=\$$1\$2"
  }
fi


# func_append_quoted VAR VALUE
# ----------------------------
# Quote VALUE and append to the end of shell variable VAR, separated
# by a space.
if test yes = "$_G_HAVE_PLUSEQ_OP"; then
  eval 'func_append_quoted ()
  {
    $debug_cmd

    func_quote_for_eval "$2"
    eval "$1+=\\ \$func_quote_for_eval_result"
  }'
else
  func_append_quoted ()
  {
    $debug_cmd

    func_quote_for_eval "$2"
    eval "$1=\$$1\\ \$func_quote_for_eval_result"
  }
fi


# func_append_uniq VAR VALUE
# --------------------------
# Append unique VALUE onto the existing contents of VAR, assuming
# entries are delimited by the first character of VALUE.  For example:
#
#   func_append_uniq options " --another-option option-argument"
#
# will only append to $options if " --another-option option-argument "
# is not already present somewhere in $options already (note spaces at
# each end implied by leading space in second argument).
func_append_uniq ()
{
    $debug_cmd

    eval _G_current_value='`$ECHO $'$1'`'
    _G_delim=`expr "$2" : '\(.\)'`

    case $_G_delim$_G_current_value$_G_delim in
      *"$2$_G_delim"*) ;;
      *) func_append "$@" ;;
    esac
}


# func_arith TERM...
# ------------------
# Set func_arith_result to the result of evaluating TERMs.
  test -z "$_G_HAVE_ARITH_OP" \
    && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
    && _G_HAVE_ARITH_OP=yes

if test yes = "$_G_HAVE_ARITH_OP"; then
  eval 'func_arith ()
  {
    $debug_cmd

    func_arith_result=$(( $* ))
  }'
else
  func_arith ()
  {
    $debug_cmd

    func_arith_result=`expr "$@"`
  }
fi


# func_basename FILE
# ------------------
# Set func_basename_result to FILE with everything up to and including
# the last / stripped.
if test yes = "$_G_HAVE_XSI_OPS"; then
  # If this shell supports suffix pattern removal, then use it to avoid
  # forking. Hide the definitions single quotes in case the shell chokes
  # on unsupported syntax...
  _b='func_basename_result=${1##*/}'
  _d='case $1 in
        */*) func_dirname_result=${1%/*}$2 ;;
        *  ) func_dirname_result=$3        ;;
      esac'

else
  # ...otherwise fall back to using sed.
  _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
  _d='func_dirname_result=`$ECHO "$1"  |$SED "$sed_dirname"`
      if test "X$func_dirname_result" = "X$1"; then
        func_dirname_result=$3
      else
        func_append func_dirname_result "$2"
      fi'
fi

eval 'func_basename ()
{
    $debug_cmd

    '"$_b"'
}'


# func_dirname FILE APPEND NONDIR_REPLACEMENT
# -------------------------------------------
# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
eval 'func_dirname ()
{
    $debug_cmd

    '"$_d"'
}'


# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
# --------------------------------------------------------
# Perform func_basename and func_dirname in a single function
# call:
#   dirname:  Compute the dirname of FILE.  If nonempty,
#             add APPEND to the result, otherwise set result
#             to NONDIR_REPLACEMENT.
#             value returned in "$func_dirname_result"
#   basename: Compute filename of FILE.
#             value retuned in "$func_basename_result"
# For efficiency, we do not delegate to the functions above but instead
# duplicate the functionality here.
eval 'func_dirname_and_basename ()
{
    $debug_cmd

    '"$_b"'
    '"$_d"'
}'


# func_echo ARG...
# ----------------
# Echo program name prefixed message.
func_echo ()
{
    $debug_cmd

    _G_message=$*

    func_echo_IFS=$IFS
    IFS=$nl
    for _G_line in $_G_message; do
      IFS=$func_echo_IFS
      $ECHO "$progname: $_G_line"
    done
    IFS=$func_echo_IFS
}


# func_echo_all ARG...
# --------------------
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
    $ECHO "$*"
}


# func_echo_infix_1 INFIX ARG...
# ------------------------------
# Echo program name, followed by INFIX on the first line, with any
# additional lines not showing INFIX.
func_echo_infix_1 ()
{
    $debug_cmd

    $require_term_colors

    _G_infix=$1; shift
    _G_indent=$_G_infix
    _G_prefix="$progname: $_G_infix: "
    _G_message=$*

    # Strip color escape sequences before counting printable length
    for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
    do
      test -n "$_G_tc" && {
        _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
        _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
      }
    done
    _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`"  " ## exclude from sc_prohibit_nested_quotes

    func_echo_infix_1_IFS=$IFS
    IFS=$nl
    for _G_line in $_G_message; do
      IFS=$func_echo_infix_1_IFS
      $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
      _G_prefix=$_G_indent
    done
    IFS=$func_echo_infix_1_IFS
}


# func_error ARG...
# -----------------
# Echo program name prefixed message to standard error.
func_error ()
{
    $debug_cmd

    $require_term_colors

    func_echo_infix_1 "  $tc_standout${tc_red}error$tc_reset" "$*" >&2
}


# func_fatal_error ARG...
# -----------------------
# Echo program name prefixed message to standard error, and exit.
func_fatal_error ()
{
    $debug_cmd

    func_error "$*"
    exit $EXIT_FAILURE
}


# func_grep EXPRESSION FILENAME
# -----------------------------
# Check whether EXPRESSION matches any line of FILENAME, without output.
func_grep ()
{
    $debug_cmd

    $GREP "$1" "$2" >/dev/null 2>&1
}


# func_len STRING
# ---------------
# Set func_len_result to the length of STRING. STRING may not
# start with a hyphen.
  test -z "$_G_HAVE_XSI_OPS" \
    && (eval 'x=a/b/c;
      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
    && _G_HAVE_XSI_OPS=yes

if test yes = "$_G_HAVE_XSI_OPS"; then
  eval 'func_len ()
  {
    $debug_cmd

    func_len_result=${#1}
  }'
else
  func_len ()
  {
    $debug_cmd

    func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
  }
fi


# func_mkdir_p DIRECTORY-PATH
# ---------------------------
# Make sure the entire path to DIRECTORY-PATH is available.
func_mkdir_p ()
{
    $debug_cmd

    _G_directory_path=$1
    _G_dir_list=

    if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then

      # Protect directory names starting with '-'
      case $_G_directory_path in
        -*) _G_directory_path=./$_G_directory_path ;;
      esac

      # While some portion of DIR does not yet exist...
      while test ! -d "$_G_directory_path"; do
        # ...make a list in topmost first order.  Use a colon delimited
        # list incase some portion of path contains whitespace.
        _G_dir_list=$_G_directory_path:$_G_dir_list

        # If the last portion added has no slash in it, the list is done
        case $_G_directory_path in */*) ;; *) break ;; esac

        # ...otherwise throw away the child directory and loop
        _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
      done
      _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`

      func_mkdir_p_IFS=$IFS; IFS=:
      for _G_dir in $_G_dir_list; do
        IFS=$func_mkdir_p_IFS
        # mkdir can fail with a 'File exist' error if two processes
        # try to create one of the directories concurrently.  Don't
        # stop in that case!
        $MKDIR "$_G_dir" 2>/dev/null || :
      done
      IFS=$func_mkdir_p_IFS

      # Bail out if we (or some other process) failed to create a directory.
      test -d "$_G_directory_path" || \
        func_fatal_error "Failed to create '$1'"
    fi
}


# func_mktempdir [BASENAME]
# -------------------------
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible.  If
# given, BASENAME is the basename for that directory.
func_mktempdir ()
{
    $debug_cmd

    _G_template=${TMPDIR-/tmp}/${1-$progname}

    if test : = "$opt_dry_run"; then
      # Return a directory name, but don't create it in dry-run mode
      _G_tmpdir=$_G_template-$$
    else

      # If mktemp works, use that first and foremost
      _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`

      if test ! -d "$_G_tmpdir"; then
        # Failing that, at least try and use $RANDOM to avoid a race
        _G_tmpdir=$_G_template-${RANDOM-0}$$

        func_mktempdir_umask=`umask`
        umask 0077
        $MKDIR "$_G_tmpdir"
        umask $func_mktempdir_umask
      fi

      # If we're not in dry-run mode, bomb out on failure
      test -d "$_G_tmpdir" || \
        func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
    fi

    $ECHO "$_G_tmpdir"
}


# func_normal_abspath PATH
# ------------------------
# Remove doubled-up and trailing slashes, "." path components,
# and cancel out any ".." path components in PATH after making
# it an absolute path.
func_normal_abspath ()
{
    $debug_cmd

    # These SED scripts presuppose an absolute path with a trailing slash.
    _G_pathcar='s|^/\([^/]*\).*$|\1|'
    _G_pathcdr='s|^/[^/]*||'
    _G_removedotparts=':dotsl
                s|/\./|/|g
                t dotsl
                s|/\.$|/|'
    _G_collapseslashes='s|/\{1,\}|/|g'
    _G_finalslash='s|/*$|/|'

    # Start from root dir and reassemble the path.
    func_normal_abspath_result=
    func_normal_abspath_tpath=$1
    func_normal_abspath_altnamespace=
    case $func_normal_abspath_tpath in
      "")
        # Empty path, that just means $cwd.
        func_stripname '' '/' "`pwd`"
        func_normal_abspath_result=$func_stripname_result
        return
        ;;
      # The next three entries are used to spot a run of precisely
      # two leading slashes without using negated character classes;
      # we take advantage of case's first-match behaviour.
      ///*)
        # Unusual form of absolute path, do nothing.
        ;;
      //*)
        # Not necessarily an ordinary path; POSIX reserves leading '//'
        # and for example Cygwin uses it to access remote file shares
        # over CIFS/SMB, so we conserve a leading double slash if found.
        func_normal_abspath_altnamespace=/
        ;;
      /*)
        # Absolute path, do nothing.
        ;;
      *)
        # Relative path, prepend $cwd.
        func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
        ;;
    esac

    # Cancel out all the simple stuff to save iterations.  We also want
    # the path to end with a slash for ease of parsing, so make sure
    # there is one (and only one) here.
    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
          -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
    while :; do
      # Processed it all yet?
      if test / = "$func_normal_abspath_tpath"; then
        # If we ascended to the root using ".." the result may be empty now.
        if test -z "$func_normal_abspath_result"; then
          func_normal_abspath_result=/
        fi
        break
      fi
      func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
          -e "$_G_pathcar"`
      func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
          -e "$_G_pathcdr"`
      # Figure out what to do with it
      case $func_normal_abspath_tcomponent in
        "")
          # Trailing empty path component, ignore it.
          ;;
        ..)
          # Parent dir; strip last assembled component from result.
          func_dirname "$func_normal_abspath_result"
          func_normal_abspath_result=$func_dirname_result
          ;;
        *)
          # Actual path component, append it.
          func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
          ;;
      esac
    done
    # Restore leading double-slash if one was found on entry.
    func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
}


# func_notquiet ARG...
# --------------------
# Echo program name prefixed message only when not in quiet mode.
func_notquiet ()
{
    $debug_cmd

    $opt_quiet || func_echo ${1+"$@"}

    # A bug in bash halts the script if the last line of a function
    # fails when set -e is in force, so we need another command to
    # work around that:
    :
}


# func_relative_path SRCDIR DSTDIR
# --------------------------------
# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
func_relative_path ()
{
    $debug_cmd

    func_relative_path_result=
    func_normal_abspath "$1"
    func_relative_path_tlibdir=$func_normal_abspath_result
    func_normal_abspath "$2"
    func_relative_path_tbindir=$func_normal_abspath_result

    # Ascend the tree starting from libdir
    while :; do
      # check if we have found a prefix of bindir
      case $func_relative_path_tbindir in
        $func_relative_path_tlibdir)
          # found an exact match
          func_relative_path_tcancelled=
          break
          ;;
        $func_relative_path_tlibdir*)
          # found a matching prefix
          func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
          func_relative_path_tcancelled=$func_stripname_result
          if test -z "$func_relative_path_result"; then
            func_relative_path_result=.
          fi
          break
          ;;
        *)
          func_dirname $func_relative_path_tlibdir
          func_relative_path_tlibdir=$func_dirname_result
          if test -z "$func_relative_path_tlibdir"; then
            # Have to descend all the way to the root!
            func_relative_path_result=../$func_relative_path_result
            func_relative_path_tcancelled=$func_relative_path_tbindir
            break
          fi
          func_relative_path_result=../$func_relative_path_result
          ;;
      esac
    done

    # Now calculate path; take care to avoid doubling-up slashes.
    func_stripname '' '/' "$func_relative_path_result"
    func_relative_path_result=$func_stripname_result
    func_stripname '/' '/' "$func_relative_path_tcancelled"
    if test -n "$func_stripname_result"; then
      func_append func_relative_path_result "/$func_stripname_result"
    fi

    # Normalisation. If bindir is libdir, return '.' else relative path.
    if test -n "$func_relative_path_result"; then
      func_stripname './' '' "$func_relative_path_result"
      func_relative_path_result=$func_stripname_result
    fi

    test -n "$func_relative_path_result" || func_relative_path_result=.

    :
}


# func_quote_for_eval ARG...
# --------------------------
# Aesthetically quote ARGs to be evaled later.
# This function returns two values:
#   i) func_quote_for_eval_result
#      double-quoted, suitable for a subsequent eval
#  ii) func_quote_for_eval_unquoted_result
#      has all characters that are still active within double
#      quotes backslashified.
func_quote_for_eval ()
{
    $debug_cmd

    func_quote_for_eval_unquoted_result=
    func_quote_for_eval_result=
    while test 0 -lt $#; do
      case $1 in
        *[\\\`\"\$]*)
          _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
        *)
          _G_unquoted_arg=$1 ;;
      esac
      if test -n "$func_quote_for_eval_unquoted_result"; then
        func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
      else
        func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
      fi

      case $_G_unquoted_arg in
        # Double-quote args containing shell metacharacters to delay
        # word splitting, command substitution and variable expansion
        # for a subsequent eval.
        # Many Bourne shells cannot handle close brackets correctly
        # in scan sets, so we specify it separately.
        *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"")
          _G_quoted_arg=\"$_G_unquoted_arg\"
          ;;
        *)
          _G_quoted_arg=$_G_unquoted_arg
          ;;
      esac

      if test -n "$func_quote_for_eval_result"; then
        func_append func_quote_for_eval_result " $_G_quoted_arg"
      else
        func_append func_quote_for_eval_result "$_G_quoted_arg"
      fi
      shift
    done
}


# func_quote_for_expand ARG
# -------------------------
# Aesthetically quote ARG to be evaled later; same as above,
# but do not quote variable references.
func_quote_for_expand ()
{
    $debug_cmd

    case $1 in
      *[\\\`\"]*)
        _G_arg=`$ECHO "$1" | $SED \
            -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
      *)
        _G_arg=$1 ;;
    esac

    case $_G_arg in
      # Double-quote args containing shell metacharacters to delay
      # word splitting and command substitution for a subsequent eval.
      # Many Bourne shells cannot handle close brackets correctly
      # in scan sets, so we specify it separately.
      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
        _G_arg=\"$_G_arg\"
        ;;
    esac

    func_quote_for_expand_result=$_G_arg
}


# func_stripname PREFIX SUFFIX NAME
# ---------------------------------
# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
if test yes = "$_G_HAVE_XSI_OPS"; then
  eval 'func_stripname ()
  {
    $debug_cmd

    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
    # positional parameters, so assign one to ordinary variable first.
    func_stripname_result=$3
    func_stripname_result=${func_stripname_result#"$1"}
    func_stripname_result=${func_stripname_result%"$2"}
  }'
else
  func_stripname ()
  {
    $debug_cmd

    case $2 in
      .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
      *)  func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
    esac
  }
fi


# func_show_eval CMD [FAIL_EXP]
# -----------------------------
# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it.
func_show_eval ()
{
    $debug_cmd

    _G_cmd=$1
    _G_fail_exp=${2-':'}

    func_quote_for_expand "$_G_cmd"
    eval "func_notquiet $func_quote_for_expand_result"

    $opt_dry_run || {
      eval "$_G_cmd"
      _G_status=$?
      if test 0 -ne "$_G_status"; then
        eval "(exit $_G_status); $_G_fail_exp"
      fi
    }
}


# func_show_eval_locale CMD [FAIL_EXP]
# ------------------------------------
# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it.  Use the saved locale for evaluation.
func_show_eval_locale ()
{
    $debug_cmd

    _G_cmd=$1
    _G_fail_exp=${2-':'}

    $opt_quiet || {
      func_quote_for_expand "$_G_cmd"
      eval "func_echo $func_quote_for_expand_result"
    }

    $opt_dry_run || {
      eval "$_G_user_locale
            $_G_cmd"
      _G_status=$?
      eval "$_G_safe_locale"
      if test 0 -ne "$_G_status"; then
        eval "(exit $_G_status); $_G_fail_exp"
      fi
    }
}


# func_tr_sh
# ----------
# Turn $1 into a string suitable for a shell variable name.
# Result is stored in $func_tr_sh_result.  All characters
# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
# if $1 begins with a digit, a '_' is prepended as well.
func_tr_sh ()
{
    $debug_cmd

    case $1 in
    [0-9]* | *[!a-zA-Z0-9_]*)
      func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
      ;;
    * )
      func_tr_sh_result=$1
      ;;
    esac
}


# func_verbose ARG...
# -------------------
# Echo program name prefixed message in verbose mode only.
func_verbose ()
{
    $debug_cmd

    $opt_verbose && func_echo "$*"

    :
}


# func_warn_and_continue ARG...
# -----------------------------
# Echo program name prefixed warning message to standard error.
func_warn_and_continue ()
{
    $debug_cmd

    $require_term_colors

    func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
}


# func_warning CATEGORY ARG...
# ----------------------------
# Echo program name prefixed warning message to standard error. Warning
# messages can be filtered according to CATEGORY, where this function
# elides messages where CATEGORY is not listed in the global variable
# 'opt_warning_types'.
func_warning ()
{
    $debug_cmd

    # CATEGORY must be in the warning_categories list!
    case " $warning_categories " in
      *" $1 "*) ;;
      *) func_internal_error "invalid warning category '$1'" ;;
    esac

    _G_category=$1
    shift

    case " $opt_warning_types " in
      *" $_G_category "*) $warning_func ${1+"$@"} ;;
    esac
}


# func_sort_ver VER1 VER2
# -----------------------
# 'sort -V' is not generally available.
# Note this deviates from the version comparison in automake
# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
# but this should suffice as we won't be specifying old
# version formats or redundant trailing .0 in bootstrap.conf.
# If we did want full compatibility then we should probably
# use m4_version_compare from autoconf.
func_sort_ver ()
{
    $debug_cmd

    printf '%s\n%s\n' "$1" "$2" \
      | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
}

# func_lt_ver PREV CURR
# ---------------------
# Return true if PREV and CURR are in the correct order according to
# func_sort_ver, otherwise false.  Use it like this:
#
#  func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
func_lt_ver ()
{
    $debug_cmd

    test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
}


# Local variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
# time-stamp-time-zone: "UTC"
# End:
#! /bin/sh

# Set a version string for this script.
scriptversion=2014-01-07.03; # UTC

# A portable, pluggable option parser for Bourne shell.
# Written by Gary V. Vaughan, 2010

# Copyright (C) 2010-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions.  There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Please report bugs or propose patches to gary@gnu.org.


## ------ ##
## Usage. ##
## ------ ##

# This file is a library for parsing options in your shell scripts along
# with assorted other useful supporting features that you can make use
# of too.
#
# For the simplest scripts you might need only:
#
#   #!/bin/sh
#   . relative/path/to/funclib.sh
#   . relative/path/to/options-parser
#   scriptversion=1.0
#   func_options ${1+"$@"}
#   eval set dummy "$func_options_result"; shift
#   ...rest of your script...
#
# In order for the '--version' option to work, you will need to have a
# suitably formatted comment like the one at the top of this file
# starting with '# Written by ' and ending with '# warranty; '.
#
# For '-h' and '--help' to work, you will also need a one line
# description of your script's purpose in a comment directly above the
# '# Written by ' line, like the one at the top of this file.
#
# The default options also support '--debug', which will turn on shell
# execution tracing (see the comment above debug_cmd below for another
# use), and '--verbose' and the func_verbose function to allow your script
# to display verbose messages only when your user has specified
# '--verbose'.
#
# After sourcing this file, you can plug processing for additional
# options by amending the variables from the 'Configuration' section
# below, and following the instructions in the 'Option parsing'
# section further down.

## -------------- ##
## Configuration. ##
## -------------- ##

# You should override these variables in your script after sourcing this
# file so that they reflect the customisations you have added to the
# option parser.

# The usage line for option parsing errors and the start of '-h' and
# '--help' output messages. You can embed shell variables for delayed
# expansion at the time the message is displayed, but you will need to
# quote other shell meta-characters carefully to prevent them being
# expanded when the contents are evaled.
usage='$progpath [OPTION]...'

# Short help message in response to '-h' and '--help'.  Add to this or
# override it after sourcing this library to reflect the full set of
# options your script accepts.
usage_message="\
       --debug        enable verbose shell tracing
   -W, --warnings=CATEGORY
                      report the warnings falling in CATEGORY [all]
   -v, --verbose      verbosely report processing
       --version      print version information and exit
   -h, --help         print short or long help message and exit
"

# Additional text appended to 'usage_message' in response to '--help'.
long_help_message="
Warning categories include:
       'all'          show all warnings
       'none'         turn off all the warnings
       'error'        warnings are treated as fatal errors"

# Help message printed before fatal option parsing errors.
fatal_help="Try '\$progname --help' for more information."



## ------------------------- ##
## Hook function management. ##
## ------------------------- ##

# This section contains functions for adding, removing, and running hooks
# to the main code.  A hook is just a named list of of function, that can
# be run in order later on.

# func_hookable FUNC_NAME
# -----------------------
# Declare that FUNC_NAME will run hooks added with
# 'func_add_hook FUNC_NAME ...'.
func_hookable ()
{
    $debug_cmd

    func_append hookable_fns " $1"
}


# func_add_hook FUNC_NAME HOOK_FUNC
# ---------------------------------
# Request that FUNC_NAME call HOOK_FUNC before it returns.  FUNC_NAME must
# first have been declared "hookable" by a call to 'func_hookable'.
func_add_hook ()
{
    $debug_cmd

    case " $hookable_fns " in
      *" $1 "*) ;;
      *) func_fatal_error "'$1' does not accept hook functions." ;;
    esac

    eval func_append ${1}_hooks '" $2"'
}


# func_remove_hook FUNC_NAME HOOK_FUNC
# ------------------------------------
# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
func_remove_hook ()
{
    $debug_cmd

    eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
}


# func_run_hooks FUNC_NAME [ARG]...
# ---------------------------------
# Run all hook functions registered to FUNC_NAME.
# It is assumed that the list of hook functions contains nothing more
# than a whitespace-delimited list of legal shell function names, and
# no effort is wasted trying to catch shell meta-characters or preserve
# whitespace.
func_run_hooks ()
{
    $debug_cmd

    case " $hookable_fns " in
      *" $1 "*) ;;
      *) func_fatal_error "'$1' does not support hook funcions.n" ;;
    esac

    eval _G_hook_fns=\$$1_hooks; shift

    for _G_hook in $_G_hook_fns; do
      eval $_G_hook '"$@"'

      # store returned options list back into positional
      # parameters for next 'cmd' execution.
      eval _G_hook_result=\$${_G_hook}_result
      eval set dummy "$_G_hook_result"; shift
    done

    func_quote_for_eval ${1+"$@"}
    func_run_hooks_result=$func_quote_for_eval_result
}



## --------------- ##
## Option parsing. ##
## --------------- ##

# In order to add your own option parsing hooks, you must accept the
# full positional parameter list in your hook function, remove any
# options that you action, and then pass back the remaining unprocessed
# options in '<hooked_function_name>_result', escaped suitably for
# 'eval'.  Like this:
#
#    my_options_prep ()
#    {
#        $debug_cmd
#
#        # Extend the existing usage message.
#        usage_message=$usage_message'
#      -s, --silent       don'\''t print informational messages
#    '
#
#        func_quote_for_eval ${1+"$@"}
#        my_options_prep_result=$func_quote_for_eval_result
#    }
#    func_add_hook func_options_prep my_options_prep
#
#
#    my_silent_option ()
#    {
#        $debug_cmd
#
#        # Note that for efficiency, we parse as many options as we can
#        # recognise in a loop before passing the remainder back to the
#        # caller on the first unrecognised argument we encounter.
#        while test $# -gt 0; do
#          opt=$1; shift
#          case $opt in
#            --silent|-s) opt_silent=: ;;
#            # Separate non-argument short options:
#            -s*)         func_split_short_opt "$_G_opt"
#                         set dummy "$func_split_short_opt_name" \
#                             "-$func_split_short_opt_arg" ${1+"$@"}
#                         shift
#                         ;;
#            *)            set dummy "$_G_opt" "$*"; shift; break ;;
#          esac
#        done
#
#        func_quote_for_eval ${1+"$@"}
#        my_silent_option_result=$func_quote_for_eval_result
#    }
#    func_add_hook func_parse_options my_silent_option
#
#
#    my_option_validation ()
#    {
#        $debug_cmd
#
#        $opt_silent && $opt_verbose && func_fatal_help "\
#    '--silent' and '--verbose' options are mutually exclusive."
#
#        func_quote_for_eval ${1+"$@"}
#        my_option_validation_result=$func_quote_for_eval_result
#    }
#    func_add_hook func_validate_options my_option_validation
#
# You'll alse need to manually amend $usage_message to reflect the extra
# options you parse.  It's preferable to append if you can, so that
# multiple option parsing hooks can be added safely.


# func_options [ARG]...
# ---------------------
# All the functions called inside func_options are hookable. See the
# individual implementations for details.
func_hookable func_options
func_options ()
{
    $debug_cmd

    func_options_prep ${1+"$@"}
    eval func_parse_options \
        ${func_options_prep_result+"$func_options_prep_result"}
    eval func_validate_options \
        ${func_parse_options_result+"$func_parse_options_result"}

    eval func_run_hooks func_options \
        ${func_validate_options_result+"$func_validate_options_result"}

    # save modified positional parameters for caller
    func_options_result=$func_run_hooks_result
}


# func_options_prep [ARG]...
# --------------------------
# All initialisations required before starting the option parse loop.
# Note that when calling hook functions, we pass through the list of
# positional parameters.  If a hook function modifies that list, and
# needs to propogate that back to rest of this script, then the complete
# modified list must be put in 'func_run_hooks_result' before
# returning.
func_hookable func_options_prep
func_options_prep ()
{
    $debug_cmd

    # Option defaults:
    opt_verbose=false
    opt_warning_types=

    func_run_hooks func_options_prep ${1+"$@"}

    # save modified positional parameters for caller
    func_options_prep_result=$func_run_hooks_result
}


# func_parse_options [ARG]...
# ---------------------------
# The main option parsing loop.
func_hookable func_parse_options
func_parse_options ()
{
    $debug_cmd

    func_parse_options_result=

    # this just eases exit handling
    while test $# -gt 0; do
      # Defer to hook functions for initial option parsing, so they
      # get priority in the event of reusing an option name.
      func_run_hooks func_parse_options ${1+"$@"}

      # Adjust func_parse_options positional parameters to match
      eval set dummy "$func_run_hooks_result"; shift

      # Break out of the loop if we already parsed every option.
      test $# -gt 0 || break

      _G_opt=$1
      shift
      case $_G_opt in
        --debug|-x)   debug_cmd='set -x'
                      func_echo "enabling shell trace mode"
                      $debug_cmd
                      ;;

        --no-warnings|--no-warning|--no-warn)
                      set dummy --warnings none ${1+"$@"}
                      shift
                      ;;

        --warnings|--warning|-W)
                      test $# = 0 && func_missing_arg $_G_opt && break
                      case " $warning_categories $1" in
                        *" $1 "*)
                          # trailing space prevents matching last $1 above
                          func_append_uniq opt_warning_types " $1"
                          ;;
                        *all)
                          opt_warning_types=$warning_categories
                          ;;
                        *none)
                          opt_warning_types=none
                          warning_func=:
                          ;;
                        *error)
                          opt_warning_types=$warning_categories
                          warning_func=func_fatal_error
                          ;;
                        *)
                          func_fatal_error \
                             "unsupported warning category: '$1'"
                          ;;
                      esac
                      shift
                      ;;

        --verbose|-v) opt_verbose=: ;;
        --version)    func_version ;;
        -\?|-h)       func_usage ;;
        --help)       func_help ;;

        # Separate optargs to long options (plugins may need this):
        --*=*)        func_split_equals "$_G_opt"
                      set dummy "$func_split_equals_lhs" \
                          "$func_split_equals_rhs" ${1+"$@"}
                      shift
                      ;;

       # Separate optargs to short options:
        -W*)
                      func_split_short_opt "$_G_opt"
                      set dummy "$func_split_short_opt_name" \
                          "$func_split_short_opt_arg" ${1+"$@"}
                      shift
                      ;;

        # Separate non-argument short options:
        -\?*|-h*|-v*|-x*)
                      func_split_short_opt "$_G_opt"
                      set dummy "$func_split_short_opt_name" \
                          "-$func_split_short_opt_arg" ${1+"$@"}
                      shift
                      ;;

        --)           break ;;
        -*)           func_fatal_help "unrecognised option: '$_G_opt'" ;;
        *)            set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
      esac
    done

    # save modified positional parameters for caller
    func_quote_for_eval ${1+"$@"}
    func_parse_options_result=$func_quote_for_eval_result
}


# func_validate_options [ARG]...
# ------------------------------
# Perform any sanity checks on option settings and/or unconsumed
# arguments.
func_hookable func_validate_options
func_validate_options ()
{
    $debug_cmd

    # Display all warnings if -W was not given.
    test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"

    func_run_hooks func_validate_options ${1+"$@"}

    # Bail if the options were screwed!
    $exit_cmd $EXIT_FAILURE

    # save modified positional parameters for caller
    func_validate_options_result=$func_run_hooks_result
}



## ----------------- ##
## Helper functions. ##
## ----------------- ##

# This section contains the helper functions used by the rest of the
# hookable option parser framework in ascii-betical order.


# func_fatal_help ARG...
# ----------------------
# Echo program name prefixed message to standard error, followed by
# a help hint, and exit.
func_fatal_help ()
{
    $debug_cmd

    eval \$ECHO \""Usage: $usage"\"
    eval \$ECHO \""$fatal_help"\"
    func_error ${1+"$@"}
    exit $EXIT_FAILURE
}


# func_help
# ---------
# Echo long help message to standard output and exit.
func_help ()
{
    $debug_cmd

    func_usage_message
    $ECHO "$long_help_message"
    exit 0
}


# func_missing_arg ARGNAME
# ------------------------
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
    $debug_cmd

    func_error "Missing argument for '$1'."
    exit_cmd=exit
}


# func_split_equals STRING
# ------------------------
# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
# splitting STRING at the '=' sign.
test -z "$_G_HAVE_XSI_OPS" \
    && (eval 'x=a/b/c;
      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
    && _G_HAVE_XSI_OPS=yes

if test yes = "$_G_HAVE_XSI_OPS"
then
  # This is an XSI compatible shell, allowing a faster implementation...
  eval 'func_split_equals ()
  {
      $debug_cmd

      func_split_equals_lhs=${1%%=*}
      func_split_equals_rhs=${1#*=}
      test "x$func_split_equals_lhs" = "x$1" \
        && func_split_equals_rhs=
  }'
else
  # ...otherwise fall back to using expr, which is often a shell builtin.
  func_split_equals ()
  {
      $debug_cmd

      func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
      func_split_equals_rhs=
      test "x$func_split_equals_lhs" = "x$1" \
        || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
  }
fi #func_split_equals


# func_split_short_opt SHORTOPT
# -----------------------------
# Set func_split_short_opt_name and func_split_short_opt_arg shell
# variables after splitting SHORTOPT after the 2nd character.
if test yes = "$_G_HAVE_XSI_OPS"
then
  # This is an XSI compatible shell, allowing a faster implementation...
  eval 'func_split_short_opt ()
  {
      $debug_cmd

      func_split_short_opt_arg=${1#??}
      func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
  }'
else
  # ...otherwise fall back to using expr, which is often a shell builtin.
  func_split_short_opt ()
  {
      $debug_cmd

      func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
      func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
  }
fi #func_split_short_opt


# func_usage
# ----------
# Echo short help message to standard output and exit.
func_usage ()
{
    $debug_cmd

    func_usage_message
    $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
    exit 0
}


# func_usage_message
# ------------------
# Echo short help message to standard output.
func_usage_message ()
{
    $debug_cmd

    eval \$ECHO \""Usage: $usage"\"
    echo
    $SED -n 's|^# ||
        /^Written by/{
          x;p;x
        }
        h
        /^Written by/q' < "$progpath"
    echo
    eval \$ECHO \""$usage_message"\"
}


# func_version
# ------------
# Echo version message to standard output and exit.
func_version ()
{
    $debug_cmd

    printf '%s\n' "$progname $scriptversion"
    $SED -n '
        /(C)/!b go
        :more
        /\./!{
          N
          s|\n# | |
          b more
        }
        :go
        /^# Written by /,/# warranty; / {
          s|^# ||
          s|^# *$||
          s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
          p
        }
        /^# Written by / {
          s|^# ||
          p
        }
        /^warranty; /q' < "$progpath"

    exit $?
}


# Local variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
# time-stamp-time-zone: "UTC"
# End:

# Set a version string.
scriptversion='(GNU libtool) 2.4.6'


# func_echo ARG...
# ----------------
# Libtool also displays the current mode in messages, so override
# funclib.sh func_echo with this custom definition.
func_echo ()
{
    $debug_cmd

    _G_message=$*

    func_echo_IFS=$IFS
    IFS=$nl
    for _G_line in $_G_message; do
      IFS=$func_echo_IFS
      $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
    done
    IFS=$func_echo_IFS
}


# func_warning ARG...
# -------------------
# Libtool warnings are not categorized, so override funclib.sh
# func_warning with this simpler definition.
func_warning ()
{
    $debug_cmd

    $warning_func ${1+"$@"}
}


## ---------------- ##
## Options parsing. ##
## ---------------- ##

# Hook in the functions to make sure our own options are parsed during
# the option parsing loop.

usage='$progpath [OPTION]... [MODE-ARG]...'

# Short help message in response to '-h'.
usage_message="Options:
       --config             show all configuration variables
       --debug              enable verbose shell tracing
   -n, --dry-run            display commands without modifying any files
       --features           display basic configuration information and exit
       --mode=MODE          use operation mode MODE
       --no-warnings        equivalent to '-Wnone'
       --preserve-dup-deps  don't remove duplicate dependency libraries
       --quiet, --silent    don't print informational messages
       --tag=TAG            use configuration variables from tag TAG
   -v, --verbose            print more informational messages than default
       --version            print version information
   -W, --warnings=CATEGORY  report the warnings falling in CATEGORY [all]
   -h, --help, --help-all   print short, long, or detailed help message
"

# Additional text appended to 'usage_message' in response to '--help'.
func_help ()
{
    $debug_cmd

    func_usage_message
    $ECHO "$long_help_message

MODE must be one of the following:

       clean           remove files from the build directory
       compile         compile a source file into a libtool object
       execute         automatically set library path, then run a program
       finish          complete the installation of libtool libraries
       install         install libraries or executables
       link            create a library or an executable
       uninstall       remove libraries from an installed directory

MODE-ARGS vary depending on the MODE.  When passed as first option,
'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
Try '$progname --help --mode=MODE' for a more detailed description of MODE.

When reporting a bug, please describe a test case to reproduce it and
include the following information:

       host-triplet:   $host
       shell:          $SHELL
       compiler:       $LTCC
       compiler flags: $LTCFLAGS
       linker:         $LD (gnu? $with_gnu_ld)
       version:        $progname (GNU libtool) 2.4.6
       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`

Report bugs to <bug-libtool@gnu.org>.
GNU libtool home page: <http://www.gnu.org/software/libtool/>.
General help using GNU software: <http://www.gnu.org/gethelp/>."
    exit 0
}


# func_lo2o OBJECT-NAME
# ---------------------
# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
# object suffix.

lo2o=s/\\.lo\$/.$objext/
o2lo=s/\\.$objext\$/.lo/

if test yes = "$_G_HAVE_XSI_OPS"; then
  eval 'func_lo2o ()
  {
    case $1 in
      *.lo) func_lo2o_result=${1%.lo}.$objext ;;
      *   ) func_lo2o_result=$1               ;;
    esac
  }'

  # func_xform LIBOBJ-OR-SOURCE
  # ---------------------------
  # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
  # suffix to a '.lo' libtool-object suffix.
  eval 'func_xform ()
  {
    func_xform_result=${1%.*}.lo
  }'
else
  # ...otherwise fall back to using sed.
  func_lo2o ()
  {
    func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
  }

  func_xform ()
  {
    func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
  }
fi


# func_fatal_configuration ARG...
# -------------------------------
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
func_fatal_configuration ()
{
    func__fatal_error ${1+"$@"} \
      "See the $PACKAGE documentation for more information." \
      "Fatal configuration error."
}


# func_config
# -----------
# Display the configuration for all the tags in this script.
func_config ()
{
    re_begincf='^# ### BEGIN LIBTOOL'
    re_endcf='^# ### END LIBTOOL'

    # Default configuration.
    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"

    # Now print the configurations for the tags.
    for tagname in $taglist; do
      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
    done

    exit $?
}


# func_features
# -------------
# Display the features supported by this script.
func_features ()
{
    echo "host: $host"
    if test yes = "$build_libtool_libs"; then
      echo "enable shared libraries"
    else
      echo "disable shared libraries"
    fi
    if test yes = "$build_old_libs"; then
      echo "enable static libraries"
    else
      echo "disable static libraries"
    fi

    exit $?
}


# func_enable_tag TAGNAME
# -----------------------
# Verify that TAGNAME is valid, and either flag an error and exit, or
# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
# variable here.
func_enable_tag ()
{
    # Global variable:
    tagname=$1

    re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
    re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
    sed_extractcf=/$re_begincf/,/$re_endcf/p

    # Validate tagname.
    case $tagname in
      *[!-_A-Za-z0-9,/]*)
        func_fatal_error "invalid tag name: $tagname"
        ;;
    esac

    # Don't test for the "default" C tag, as we know it's
    # there but not specially marked.
    case $tagname in
        CC) ;;
    *)
        if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
          taglist="$taglist $tagname"

          # Evaluate the configuration.  Be careful to quote the path
          # and the sed script, to avoid splitting on whitespace, but
          # also don't use non-portable quotes within backquotes within
          # quotes we have to do it in 2 steps:
          extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
          eval "$extractedcf"
        else
          func_error "ignoring unknown tag $tagname"
        fi
        ;;
    esac
}


# func_check_version_match
# ------------------------
# Ensure that we are using m4 macros, and libtool script from the same
# release of libtool.
func_check_version_match ()
{
    if test "$package_revision" != "$macro_revision"; then
      if test "$VERSION" != "$macro_version"; then
        if test -z "$macro_version"; then
          cat >&2 <<_LT_EOF
$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from an older release.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
        else
          cat >&2 <<_LT_EOF
$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
        fi
      else
        cat >&2 <<_LT_EOF
$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
$progname: of $PACKAGE $VERSION and run autoconf again.
_LT_EOF
      fi

      exit $EXIT_MISMATCH
    fi
}


# libtool_options_prep [ARG]...
# -----------------------------
# Preparation for options parsed by libtool.
libtool_options_prep ()
{
    $debug_mode

    # Option defaults:
    opt_config=false
    opt_dlopen=
    opt_dry_run=false
    opt_help=false
    opt_mode=
    opt_preserve_dup_deps=false
    opt_quiet=false

    nonopt=
    preserve_args=

    # Shorthand for --mode=foo, only valid as the first argument
    case $1 in
    clean|clea|cle|cl)
      shift; set dummy --mode clean ${1+"$@"}; shift
      ;;
    compile|compil|compi|comp|com|co|c)
      shift; set dummy --mode compile ${1+"$@"}; shift
      ;;
    execute|execut|execu|exec|exe|ex|e)
      shift; set dummy --mode execute ${1+"$@"}; shift
      ;;
    finish|finis|fini|fin|fi|f)
      shift; set dummy --mode finish ${1+"$@"}; shift
      ;;
    install|instal|insta|inst|ins|in|i)
      shift; set dummy --mode install ${1+"$@"}; shift
      ;;
    link|lin|li|l)
      shift; set dummy --mode link ${1+"$@"}; shift
      ;;
    uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
      shift; set dummy --mode uninstall ${1+"$@"}; shift
      ;;
    esac

    # Pass back the list of options.
    func_quote_for_eval ${1+"$@"}
    libtool_options_prep_result=$func_quote_for_eval_result
}
func_add_hook func_options_prep libtool_options_prep


# libtool_parse_options [ARG]...
# ---------------------------------
# Provide handling for libtool specific options.
libtool_parse_options ()
{
    $debug_cmd

    # Perform our own loop to consume as many options as possible in
    # each iteration.
    while test $# -gt 0; do
      _G_opt=$1
      shift
      case $_G_opt in
        --dry-run|--dryrun|-n)
                        opt_dry_run=:
                        ;;

        --config)       func_config ;;

        --dlopen|-dlopen)
                        opt_dlopen="${opt_dlopen+$opt_dlopen
}$1"
                        shift
                        ;;

        --preserve-dup-deps)
                        opt_preserve_dup_deps=: ;;

        --features)     func_features ;;

        --finish)       set dummy --mode finish ${1+"$@"}; shift ;;

        --help)         opt_help=: ;;

        --help-all)     opt_help=': help-all' ;;

        --mode)         test $# = 0 && func_missing_arg $_G_opt && break
                        opt_mode=$1
                        case $1 in
                          # Valid mode arguments:
                          clean|compile|execute|finish|install|link|relink|uninstall) ;;

                          # Catch anything else as an error
                          *) func_error "invalid argument for $_G_opt"
                             exit_cmd=exit
                             break
                             ;;
                        esac
                        shift
                        ;;

        --no-silent|--no-quiet)
                        opt_quiet=false
                        func_append preserve_args " $_G_opt"
                        ;;

        --no-warnings|--no-warning|--no-warn)
                        opt_warning=false
                        func_append preserve_args " $_G_opt"
                        ;;

        --no-verbose)
                        opt_verbose=false
                        func_append preserve_args " $_G_opt"
                        ;;

        --silent|--quiet)
                        opt_quiet=:
                        opt_verbose=false
                        func_append preserve_args " $_G_opt"
                        ;;

        --tag)          test $# = 0 && func_missing_arg $_G_opt && break
                        opt_tag=$1
                        func_append preserve_args " $_G_opt $1"
                        func_enable_tag "$1"
                        shift
                        ;;

        --verbose|-v)   opt_quiet=false
                        opt_verbose=:
                        func_append preserve_args " $_G_opt"
                        ;;

        # An option not handled by this hook function:
        *)              set dummy "$_G_opt" ${1+"$@"};  shift; break  ;;
      esac
    done


    # save modified positional parameters for caller
    func_quote_for_eval ${1+"$@"}
    libtool_parse_options_result=$func_quote_for_eval_result
}
func_add_hook func_parse_options libtool_parse_options



# libtool_validate_options [ARG]...
# ---------------------------------
# Perform any sanity checks on option settings and/or unconsumed
# arguments.
libtool_validate_options ()
{
    # save first non-option argument
    if test 0 -lt $#; then
      nonopt=$1
      shift
    fi

    # preserve --debug
    test : = "$debug_cmd" || func_append preserve_args " --debug"

    case $host in
      # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
      # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
      *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
        # don't eliminate duplications in $postdeps and $predeps
        opt_duplicate_compiler_generated_deps=:
        ;;
      *)
        opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
        ;;
    esac

    $opt_help || {
      # Sanity checks first:
      func_check_version_match

      test yes != "$build_libtool_libs" \
        && test yes != "$build_old_libs" \
        && func_fatal_configuration "not configured to build any kind of library"

      # Darwin sucks
      eval std_shrext=\"$shrext_cmds\"

      # Only execute mode is allowed to have -dlopen flags.
      if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
        func_error "unrecognized option '-dlopen'"
        $ECHO "$help" 1>&2
        exit $EXIT_FAILURE
      fi

      # Change the help message to a mode-specific one.
      generic_help=$help
      help="Try '$progname --help --mode=$opt_mode' for more information."
    }

    # Pass back the unparsed argument list
    func_quote_for_eval ${1+"$@"}
    libtool_validate_options_result=$func_quote_for_eval_result
}
func_add_hook func_validate_options libtool_validate_options


# Process options as early as possible so that --help and --version
# can return quickly.
func_options ${1+"$@"}
eval set dummy "$func_options_result"; shift



## ----------- ##
##    Main.    ##
## ----------- ##

magic='%%%MAGIC variable%%%'
magic_exe='%%%MAGIC EXE variable%%%'

# Global variables.
extracted_archives=
extracted_serial=0

# If this variable is set in any of the actions, the command in it
# will be execed at the end.  This prevents here-documents from being
# left over by shells.
exec_cmd=


# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
  eval 'cat <<_LTECHO_EOF
$1
_LTECHO_EOF'
}

# func_generated_by_libtool
# True iff stdin has been generated by Libtool. This function is only
# a basic sanity check; it will hardly flush out determined imposters.
func_generated_by_libtool_p ()
{
  $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
}

# func_lalib_p file
# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_lalib_p ()
{
    test -f "$1" &&
      $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
}

# func_lalib_unsafe_p file
# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function implements the same check as func_lalib_p without
# resorting to external programs.  To this end, it redirects stdin and
# closes it afterwards, without saving the original file descriptor.
# As a safety measure, use it only where a negative result would be
# fatal anyway.  Works if 'file' does not exist.
func_lalib_unsafe_p ()
{
    lalib_p=no
    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
        for lalib_p_l in 1 2 3 4
        do
            read lalib_p_line
            case $lalib_p_line in
                \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
            esac
        done
        exec 0<&5 5<&-
    fi
    test yes = "$lalib_p"
}

# func_ltwrapper_script_p file
# True iff FILE is a libtool wrapper script
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_script_p ()
{
    test -f "$1" &&
      $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
}

# func_ltwrapper_executable_p file
# True iff FILE is a libtool wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_executable_p ()
{
    func_ltwrapper_exec_suffix=
    case $1 in
    *.exe) ;;
    *) func_ltwrapper_exec_suffix=.exe ;;
    esac
    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
}

# func_ltwrapper_scriptname file
# Assumes file is an ltwrapper_executable
# uses $file to determine the appropriate filename for a
# temporary ltwrapper_script.
func_ltwrapper_scriptname ()
{
    func_dirname_and_basename "$1" "" "."
    func_stripname '' '.exe' "$func_basename_result"
    func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
}

# func_ltwrapper_p file
# True iff FILE is a libtool wrapper script or wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_p ()
{
    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
}


# func_execute_cmds commands fail_cmd
# Execute tilde-delimited COMMANDS.
# If FAIL_CMD is given, eval that upon failure.
# FAIL_CMD may read-access the current command in variable CMD!
func_execute_cmds ()
{
    $debug_cmd

    save_ifs=$IFS; IFS='~'
    for cmd in $1; do
      IFS=$sp$nl
      eval cmd=\"$cmd\"
      IFS=$save_ifs
      func_show_eval "$cmd" "${2-:}"
    done
    IFS=$save_ifs
}


# func_source file
# Source FILE, adding directory component if necessary.
# Note that it is not necessary on cygwin/mingw to append a dot to
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)!  Also, sourcing
# 'FILE.' does not work on cygwin managed mounts.
func_source ()
{
    $debug_cmd

    case $1 in
    */* | *\\*) . "$1" ;;
    *)          . "./$1" ;;
    esac
}


# func_resolve_sysroot PATH
# Replace a leading = in PATH with a sysroot.  Store the result into
# func_resolve_sysroot_result
func_resolve_sysroot ()
{
  func_resolve_sysroot_result=$1
  case $func_resolve_sysroot_result in
  =*)
    func_stripname '=' '' "$func_resolve_sysroot_result"
    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
    ;;
  esac
}

# func_replace_sysroot PATH
# If PATH begins with the sysroot, replace it with = and
# store the result into func_replace_sysroot_result.
func_replace_sysroot ()
{
  case $lt_sysroot:$1 in
  ?*:"$lt_sysroot"*)
    func_stripname "$lt_sysroot" '' "$1"
    func_replace_sysroot_result='='$func_stripname_result
    ;;
  *)
    # Including no sysroot.
    func_replace_sysroot_result=$1
    ;;
  esac
}

# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
    $debug_cmd

    if test -n "$available_tags" && test -z "$tagname"; then
      CC_quoted=
      for arg in $CC; do
        func_append_quoted CC_quoted "$arg"
      done
      CC_expanded=`func_echo_all $CC`
      CC_quoted_expanded=`func_echo_all $CC_quoted`
      case $@ in
      # Blanks in the command may have been stripped by the calling shell,
      # but not from the CC environment variable when configure was run.
      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
      # Blanks at the start of $base_compile will cause this to fail
      # if we don't check for them as well.
      *)
        for z in $available_tags; do
          if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
            # Evaluate the configuration.
            eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
            CC_quoted=
            for arg in $CC; do
              # Double-quote args containing other shell metacharacters.
              func_append_quoted CC_quoted "$arg"
            done
            CC_expanded=`func_echo_all $CC`
            CC_quoted_expanded=`func_echo_all $CC_quoted`
            case "$@ " in
            " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
            " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
              # The compiler in the base compile command matches
              # the one in the tagged configuration.
              # Assume this is the tagged configuration we want.
              tagname=$z
              break
              ;;
            esac
          fi
        done
        # If $tagname still isn't set, then no tagged configuration
        # was found and let the user know that the "--tag" command
        # line option must be used.
        if test -z "$tagname"; then
          func_echo "unable to infer tagged configuration"
          func_fatal_error "specify a tag with '--tag'"
#       else
#         func_verbose "using $tagname tagged configuration"
        fi
        ;;
      esac
    fi
}



# func_write_libtool_object output_name pic_name nonpic_name
# Create a libtool object file (analogous to a ".la" file),
# but don't create it if we're doing a dry run.
func_write_libtool_object ()
{
    write_libobj=$1
    if test yes = "$build_libtool_libs"; then
      write_lobj=\'$2\'
    else
      write_lobj=none
    fi

    if test yes = "$build_old_libs"; then
      write_oldobj=\'$3\'
    else
      write_oldobj=none
    fi

    $opt_dry_run || {
      cat >${write_libobj}T <<EOF
# $write_libobj - a libtool object file
# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.

# Name of the PIC object.
pic_object=$write_lobj

# Name of the non-PIC object
non_pic_object=$write_oldobj

EOF
      $MV "${write_libobj}T" "$write_libobj"
    }
}


##################################################
# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
##################################################

# func_convert_core_file_wine_to_w32 ARG
# Helper function used by file name conversion functions when $build is *nix,
# and $host is mingw, cygwin, or some other w32 environment. Relies on a
# correctly configured wine environment available, with the winepath program
# in $build's $PATH.
#
# ARG is the $build file name to be converted to w32 format.
# Result is available in $func_convert_core_file_wine_to_w32_result, and will
# be empty on error (or when ARG is empty)
func_convert_core_file_wine_to_w32 ()
{
  $debug_cmd

  func_convert_core_file_wine_to_w32_result=$1
  if test -n "$1"; then
    # Unfortunately, winepath does not exit with a non-zero error code, so we
    # are forced to check the contents of stdout. On the other hand, if the
    # command is not found, the shell will set an exit code of 127 and print
    # *an error message* to stdout. So we must check for both error code of
    # zero AND non-empty stdout, which explains the odd construction:
    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
    if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
        $SED -e "$sed_naive_backslashify"`
    else
      func_convert_core_file_wine_to_w32_result=
    fi
  fi
}
# end: func_convert_core_file_wine_to_w32


# func_convert_core_path_wine_to_w32 ARG
# Helper function used by path conversion functions when $build is *nix, and
# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
# configured wine environment available, with the winepath program in $build's
# $PATH. Assumes ARG has no leading or trailing path separator characters.
#
# ARG is path to be converted from $build format to win32.
# Result is available in $func_convert_core_path_wine_to_w32_result.
# Unconvertible file (directory) names in ARG are skipped; if no directory names
# are convertible, then the result may be empty.
func_convert_core_path_wine_to_w32 ()
{
  $debug_cmd

  # unfortunately, winepath doesn't convert paths, only file names
  func_convert_core_path_wine_to_w32_result=
  if test -n "$1"; then
    oldIFS=$IFS
    IFS=:
    for func_convert_core_path_wine_to_w32_f in $1; do
      IFS=$oldIFS
      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
      if test -n "$func_convert_core_file_wine_to_w32_result"; then
        if test -z "$func_convert_core_path_wine_to_w32_result"; then
          func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
        else
          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
        fi
      fi
    done
    IFS=$oldIFS
  fi
}
# end: func_convert_core_path_wine_to_w32


# func_cygpath ARGS...
# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
# (2), returns the Cygwin file name or path in func_cygpath_result (input
# file name or path is assumed to be in w32 format, as previously converted
# from $build's *nix or MSYS format). In case (3), returns the w32 file name
# or path in func_cygpath_result (input file name or path is assumed to be in
# Cygwin format). Returns an empty string on error.
#
# ARGS are passed to cygpath, with the last one being the file name or path to
# be converted.
#
# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
# environment variable; do not put it in $PATH.
func_cygpath ()
{
  $debug_cmd

  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
    if test "$?" -ne 0; then
      # on failure, ensure result is empty
      func_cygpath_result=
    fi
  else
    func_cygpath_result=
    func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
  fi
}
#end: func_cygpath


# func_convert_core_msys_to_w32 ARG
# Convert file name or path ARG from MSYS format to w32 format.  Return
# result in func_convert_core_msys_to_w32_result.
func_convert_core_msys_to_w32 ()
{
  $debug_cmd

  # awkward: cmd appends spaces to result
  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
    $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
}
#end: func_convert_core_msys_to_w32


# func_convert_file_check ARG1 ARG2
# Verify that ARG1 (a file name in $build format) was converted to $host
# format in ARG2. Otherwise, emit an error message, but continue (resetting
# func_to_host_file_result to ARG1).
func_convert_file_check ()
{
  $debug_cmd

  if test -z "$2" && test -n "$1"; then
    func_error "Could not determine host file name corresponding to"
    func_error "  '$1'"
    func_error "Continuing, but uninstalled executables may not work."
    # Fallback:
    func_to_host_file_result=$1
  fi
}
# end func_convert_file_check


# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
# Verify that FROM_PATH (a path in $build format) was converted to $host
# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
# func_to_host_file_result to a simplistic fallback value (see below).
func_convert_path_check ()
{
  $debug_cmd

  if test -z "$4" && test -n "$3"; then
    func_error "Could not determine the host path corresponding to"
    func_error "  '$3'"
    func_error "Continuing, but uninstalled executables may not work."
    # Fallback.  This is a deliberately simplistic "conversion" and
    # should not be "improved".  See libtool.info.
    if test "x$1" != "x$2"; then
      lt_replace_pathsep_chars="s|$1|$2|g"
      func_to_host_path_result=`echo "$3" |
        $SED -e "$lt_replace_pathsep_chars"`
    else
      func_to_host_path_result=$3
    fi
  fi
}
# end func_convert_path_check


# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
# and appending REPL if ORIG matches BACKPAT.
func_convert_path_front_back_pathsep ()
{
  $debug_cmd

  case $4 in
  $1 ) func_to_host_path_result=$3$func_to_host_path_result
    ;;
  esac
  case $4 in
  $2 ) func_append func_to_host_path_result "$3"
    ;;
  esac
}
# end func_convert_path_front_back_pathsep


##################################################
# $build to $host FILE NAME CONVERSION FUNCTIONS #
##################################################
# invoked via '$to_host_file_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# Result will be available in $func_to_host_file_result.


# func_to_host_file ARG
# Converts the file name ARG from $build format to $host format. Return result
# in func_to_host_file_result.
func_to_host_file ()
{
  $debug_cmd

  $to_host_file_cmd "$1"
}
# end func_to_host_file


# func_to_tool_file ARG LAZY
# converts the file name ARG from $build format to toolchain format. Return
# result in func_to_tool_file_result.  If the conversion in use is listed
# in (the comma separated) LAZY, no conversion takes place.
func_to_tool_file ()
{
  $debug_cmd

  case ,$2, in
    *,"$to_tool_file_cmd",*)
      func_to_tool_file_result=$1
      ;;
    *)
      $to_tool_file_cmd "$1"
      func_to_tool_file_result=$func_to_host_file_result
      ;;
  esac
}
# end func_to_tool_file


# func_convert_file_noop ARG
# Copy ARG to func_to_host_file_result.
func_convert_file_noop ()
{
  func_to_host_file_result=$1
}
# end func_convert_file_noop


# func_convert_file_msys_to_w32 ARG
# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
# conversion to w32 is not available inside the cwrapper.  Returns result in
# func_to_host_file_result.
func_convert_file_msys_to_w32 ()
{
  $debug_cmd

  func_to_host_file_result=$1
  if test -n "$1"; then
    func_convert_core_msys_to_w32 "$1"
    func_to_host_file_result=$func_convert_core_msys_to_w32_result
  fi
  func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_msys_to_w32


# func_convert_file_cygwin_to_w32 ARG
# Convert file name ARG from Cygwin to w32 format.  Returns result in
# func_to_host_file_result.
func_convert_file_cygwin_to_w32 ()
{
  $debug_cmd

  func_to_host_file_result=$1
  if test -n "$1"; then
    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
    # LT_CYGPATH in this case.
    func_to_host_file_result=`cygpath -m "$1"`
  fi
  func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_cygwin_to_w32


# func_convert_file_nix_to_w32 ARG
# Convert file name ARG from *nix to w32 format.  Requires a wine environment
# and a working winepath. Returns result in func_to_host_file_result.
func_convert_file_nix_to_w32 ()
{
  $debug_cmd

  func_to_host_file_result=$1
  if test -n "$1"; then
    func_convert_core_file_wine_to_w32 "$1"
    func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
  fi
  func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_nix_to_w32


# func_convert_file_msys_to_cygwin ARG
# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
# Returns result in func_to_host_file_result.
func_convert_file_msys_to_cygwin ()
{
  $debug_cmd

  func_to_host_file_result=$1
  if test -n "$1"; then
    func_convert_core_msys_to_w32 "$1"
    func_cygpath -u "$func_convert_core_msys_to_w32_result"
    func_to_host_file_result=$func_cygpath_result
  fi
  func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_msys_to_cygwin


# func_convert_file_nix_to_cygwin ARG
# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
# in func_to_host_file_result.
func_convert_file_nix_to_cygwin ()
{
  $debug_cmd

  func_to_host_file_result=$1
  if test -n "$1"; then
    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
    func_convert_core_file_wine_to_w32 "$1"
    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
    func_to_host_file_result=$func_cygpath_result
  fi
  func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_nix_to_cygwin


#############################################
# $build to $host PATH CONVERSION FUNCTIONS #
#############################################
# invoked via '$to_host_path_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# The result will be available in $func_to_host_path_result.
#
# Path separators are also converted from $build format to $host format.  If
# ARG begins or ends with a path separator character, it is preserved (but
# converted to $host format) on output.
#
# All path conversion functions are named using the following convention:
#   file name conversion function    : func_convert_file_X_to_Y ()
#   path conversion function         : func_convert_path_X_to_Y ()
# where, for any given $build/$host combination the 'X_to_Y' value is the
# same.  If conversion functions are added for new $build/$host combinations,
# the two new functions must follow this pattern, or func_init_to_host_path_cmd
# will break.


# func_init_to_host_path_cmd
# Ensures that function "pointer" variable $to_host_path_cmd is set to the
# appropriate value, based on the value of $to_host_file_cmd.
to_host_path_cmd=
func_init_to_host_path_cmd ()
{
  $debug_cmd

  if test -z "$to_host_path_cmd"; then
    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
    to_host_path_cmd=func_convert_path_$func_stripname_result
  fi
}


# func_to_host_path ARG
# Converts the path ARG from $build format to $host format. Return result
# in func_to_host_path_result.
func_to_host_path ()
{
  $debug_cmd

  func_init_to_host_path_cmd
  $to_host_path_cmd "$1"
}
# end func_to_host_path


# func_convert_path_noop ARG
# Copy ARG to func_to_host_path_result.
func_convert_path_noop ()
{
  func_to_host_path_result=$1
}
# end func_convert_path_noop


# func_convert_path_msys_to_w32 ARG
# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
# conversion to w32 is not available inside the cwrapper.  Returns result in
# func_to_host_path_result.
func_convert_path_msys_to_w32 ()
{
  $debug_cmd

  func_to_host_path_result=$1
  if test -n "$1"; then
    # Remove leading and trailing path separator characters from ARG.  MSYS
    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
    # and winepath ignores them completely.
    func_stripname : : "$1"
    func_to_host_path_tmp1=$func_stripname_result
    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
    func_to_host_path_result=$func_convert_core_msys_to_w32_result
    func_convert_path_check : ";" \
      "$func_to_host_path_tmp1" "$func_to_host_path_result"
    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
  fi
}
# end func_convert_path_msys_to_w32


# func_convert_path_cygwin_to_w32 ARG
# Convert path ARG from Cygwin to w32 format.  Returns result in
# func_to_host_file_result.
func_convert_path_cygwin_to_w32 ()
{
  $debug_cmd

  func_to_host_path_result=$1
  if test -n "$1"; then
    # See func_convert_path_msys_to_w32:
    func_stripname : : "$1"
    func_to_host_path_tmp1=$func_stripname_result
    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
    func_convert_path_check : ";" \
      "$func_to_host_path_tmp1" "$func_to_host_path_result"
    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
  fi
}
# end func_convert_path_cygwin_to_w32


# func_convert_path_nix_to_w32 ARG
# Convert path ARG from *nix to w32 format.  Requires a wine environment and
# a working winepath.  Returns result in func_to_host_file_result.
func_convert_path_nix_to_w32 ()
{
  $debug_cmd

  func_to_host_path_result=$1
  if test -n "$1"; then
    # See func_convert_path_msys_to_w32:
    func_stripname : : "$1"
    func_to_host_path_tmp1=$func_stripname_result
    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
    func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
    func_convert_path_check : ";" \
      "$func_to_host_path_tmp1" "$func_to_host_path_result"
    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
  fi
}
# end func_convert_path_nix_to_w32


# func_convert_path_msys_to_cygwin ARG
# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
# Returns result in func_to_host_file_result.
func_convert_path_msys_to_cygwin ()
{
  $debug_cmd

  func_to_host_path_result=$1
  if test -n "$1"; then
    # See func_convert_path_msys_to_w32:
    func_stripname : : "$1"
    func_to_host_path_tmp1=$func_stripname_result
    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
    func_to_host_path_result=$func_cygpath_result
    func_convert_path_check : : \
      "$func_to_host_path_tmp1" "$func_to_host_path_result"
    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
  fi
}
# end func_convert_path_msys_to_cygwin


# func_convert_path_nix_to_cygwin ARG
# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
# func_to_host_file_result.
func_convert_path_nix_to_cygwin ()
{
  $debug_cmd

  func_to_host_path_result=$1
  if test -n "$1"; then
    # Remove leading and trailing path separator characters from
    # ARG. msys behavior is inconsistent here, cygpath turns them
    # into '.;' and ';.', and winepath ignores them completely.
    func_stripname : : "$1"
    func_to_host_path_tmp1=$func_stripname_result
    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
    func_to_host_path_result=$func_cygpath_result
    func_convert_path_check : : \
      "$func_to_host_path_tmp1" "$func_to_host_path_result"
    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
  fi
}
# end func_convert_path_nix_to_cygwin


# func_dll_def_p FILE
# True iff FILE is a Windows DLL '.def' file.
# Keep in sync with _LT_DLL_DEF_P in libtool.m4
func_dll_def_p ()
{
  $debug_cmd

  func_dll_def_p_tmp=`$SED -n \
    -e 's/^[     ]*//' \
    -e '/^\(;.*\)*$/d' \
    -e 's/^\(EXPORTS\|LIBRARY\)\([       ].*\)*$/DEF/p' \
    -e q \
    "$1"`
  test DEF = "$func_dll_def_p_tmp"
}


# func_mode_compile arg...
func_mode_compile ()
{
    $debug_cmd

    # Get the compilation command and the source file.
    base_compile=
    srcfile=$nonopt  #  always keep a non-empty value in "srcfile"
    suppress_opt=yes
    suppress_output=
    arg_mode=normal
    libobj=
    later=
    pie_flag=

    for arg
    do
      case $arg_mode in
      arg  )
        # do not "continue".  Instead, add this to base_compile
        lastarg=$arg
        arg_mode=normal
        ;;

      target )
        libobj=$arg
        arg_mode=normal
        continue
        ;;

      normal )
        # Accept any command-line options.
        case $arg in
        -o)
          test -n "$libobj" && \
            func_fatal_error "you cannot specify '-o' more than once"
          arg_mode=target
          continue
          ;;

        -pie | -fpie | -fPIE)
          func_append pie_flag " $arg"
          continue
          ;;

        -shared | -static | -prefer-pic | -prefer-non-pic)
          func_append later " $arg"
          continue
          ;;

        -no-suppress)
          suppress_opt=no
          continue
          ;;

        -Xcompiler)
          arg_mode=arg  #  the next one goes into the "base_compile" arg list
          continue      #  The current "srcfile" will either be retained or
          ;;            #  replaced later.  I would guess that would be a bug.

        -Wc,*)
          func_stripname '-Wc,' '' "$arg"
          args=$func_stripname_result
          lastarg=
          save_ifs=$IFS; IFS=,
          for arg in $args; do
            IFS=$save_ifs
            func_append_quoted lastarg "$arg"
          done
          IFS=$save_ifs
          func_stripname ' ' '' "$lastarg"
          lastarg=$func_stripname_result

          # Add the arguments to base_compile.
          func_append base_compile " $lastarg"
          continue
          ;;

        *)
          # Accept the current argument as the source file.
          # The previous "srcfile" becomes the current argument.
          #
          lastarg=$srcfile
          srcfile=$arg
          ;;
        esac  #  case $arg
        ;;
      esac    #  case $arg_mode

      # Aesthetically quote the previous argument.
      func_append_quoted base_compile "$lastarg"
    done # for arg

    case $arg_mode in
    arg)
      func_fatal_error "you must specify an argument for -Xcompile"
      ;;
    target)
      func_fatal_error "you must specify a target with '-o'"
      ;;
    *)
      # Get the name of the library object.
      test -z "$libobj" && {
        func_basename "$srcfile"
        libobj=$func_basename_result
      }
      ;;
    esac

    # Recognize several different file suffixes.
    # If the user specifies -o file.o, it is replaced with file.lo
    case $libobj in
    *.[cCFSifmso] | \
    *.ada | *.adb | *.ads | *.asm | \
    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
      func_xform "$libobj"
      libobj=$func_xform_result
      ;;
    esac

    case $libobj in
    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
    *)
      func_fatal_error "cannot determine name of library object from '$libobj'"
      ;;
    esac

    func_infer_tag $base_compile

    for arg in $later; do
      case $arg in
      -shared)
        test yes = "$build_libtool_libs" \
          || func_fatal_configuration "cannot build a shared library"
        build_old_libs=no
        continue
        ;;

      -static)
        build_libtool_libs=no
        build_old_libs=yes
        continue
        ;;

      -prefer-pic)
        pic_mode=yes
        continue
        ;;

      -prefer-non-pic)
        pic_mode=no
        continue
        ;;
      esac
    done

    func_quote_for_eval "$libobj"
    test "X$libobj" != "X$func_quote_for_eval_result" \
      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'    &()|`$[]' \
      && func_warning "libobj name '$libobj' may not contain shell special characters."
    func_dirname_and_basename "$obj" "/" ""
    objname=$func_basename_result
    xdir=$func_dirname_result
    lobj=$xdir$objdir/$objname

    test -z "$base_compile" && \
      func_fatal_help "you must specify a compilation command"

    # Delete any leftover library objects.
    if test yes = "$build_old_libs"; then
      removelist="$obj $lobj $libobj ${libobj}T"
    else
      removelist="$lobj $libobj ${libobj}T"
    fi

    # On Cygwin there's no "real" PIC flag so we must build both object types
    case $host_os in
    cygwin* | mingw* | pw32* | os2* | cegcc*)
      pic_mode=default
      ;;
    esac
    if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
      # non-PIC code in shared libraries is not supported
      pic_mode=default
    fi

    # Calculate the filename of the output object if compiler does
    # not support -o with -c
    if test no = "$compiler_c_o"; then
      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
      lockfile=$output_obj.lock
    else
      output_obj=
      need_locks=no
      lockfile=
    fi

    # Lock this critical section if it is needed
    # We use this script file to make the link, it avoids creating a new file
    if test yes = "$need_locks"; then
      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
        func_echo "Waiting for $lockfile to be removed"
        sleep 2
      done
    elif test warn = "$need_locks"; then
      if test -f "$lockfile"; then
        $ECHO "\
*** ERROR, $lockfile exists and contains:
`cat $lockfile 2>/dev/null`

This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support '-c' and '-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."

        $opt_dry_run || $RM $removelist
        exit $EXIT_FAILURE
      fi
      func_append removelist " $output_obj"
      $ECHO "$srcfile" > "$lockfile"
    fi

    $opt_dry_run || $RM $removelist
    func_append removelist " $lockfile"
    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15

    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
    srcfile=$func_to_tool_file_result
    func_quote_for_eval "$srcfile"
    qsrcfile=$func_quote_for_eval_result

    # Only build a PIC object if we are building libtool libraries.
    if test yes = "$build_libtool_libs"; then
      # Without this assignment, base_compile gets emptied.
      fbsd_hideous_sh_bug=$base_compile

      if test no != "$pic_mode"; then
        command="$base_compile $qsrcfile $pic_flag"
      else
        # Don't build PIC code
        command="$base_compile $qsrcfile"
      fi

      func_mkdir_p "$xdir$objdir"

      if test -z "$output_obj"; then
        # Place PIC objects in $objdir
        func_append command " -o $lobj"
      fi

      func_show_eval_locale "$command"  \
          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'

      if test warn = "$need_locks" &&
         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
        $ECHO "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`

but it should contain:
$srcfile

This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support '-c' and '-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."

        $opt_dry_run || $RM $removelist
        exit $EXIT_FAILURE
      fi

      # Just move the object if needed, then go on to compile the next one
      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
        func_show_eval '$MV "$output_obj" "$lobj"' \
          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
      fi

      # Allow error messages only from the first compilation.
      if test yes = "$suppress_opt"; then
        suppress_output=' >/dev/null 2>&1'
      fi
    fi

    # Only build a position-dependent object if we build old libraries.
    if test yes = "$build_old_libs"; then
      if test yes != "$pic_mode"; then
        # Don't build PIC code
        command="$base_compile $qsrcfile$pie_flag"
      else
        command="$base_compile $qsrcfile $pic_flag"
      fi
      if test yes = "$compiler_c_o"; then
        func_append command " -o $obj"
      fi

      # Suppress compiler output if we already did a PIC compilation.
      func_append command "$suppress_output"
      func_show_eval_locale "$command" \
        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'

      if test warn = "$need_locks" &&
         test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
        $ECHO "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`

but it should contain:
$srcfile

This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support '-c' and '-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."

        $opt_dry_run || $RM $removelist
        exit $EXIT_FAILURE
      fi

      # Just move the object if needed
      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
        func_show_eval '$MV "$output_obj" "$obj"' \
          'error=$?; $opt_dry_run || $RM $removelist; exit $error'
      fi
    fi

    $opt_dry_run || {
      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"

      # Unlock the critical section if it was locked
      if test no != "$need_locks"; then
        removelist=$lockfile
        $RM "$lockfile"
      fi
    }

    exit $EXIT_SUCCESS
}

$opt_help || {
  test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
}

func_mode_help ()
{
    # We need to display help for each of the modes.
    case $opt_mode in
      "")
        # Generic help is extracted from the usage comments
        # at the start of this file.
        func_help
        ;;

      clean)
        $ECHO \
"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...

Remove files from the build directory.

RM is the name of the program to use to delete files associated with each FILE
(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
to RM.

If FILE is a libtool library, object or program, all the files associated
with it are deleted. Otherwise, only FILE itself is deleted using RM."
        ;;

      compile)
      $ECHO \
"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE

Compile a source file into a libtool library object.

This mode accepts the following additional options:

  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
  -no-suppress      do not suppress compiler output for multiple passes
  -prefer-pic       try to build PIC objects only
  -prefer-non-pic   try to build non-PIC objects only
  -shared           do not build a '.o' file suitable for static linking
  -static           only build a '.o' file suitable for static linking
  -Wc,FLAG          pass FLAG directly to the compiler

COMPILE-COMMAND is a command to be used in creating a 'standard' object file
from the given SOURCEFILE.

The output file name is determined by removing the directory component from
SOURCEFILE, then substituting the C source code suffix '.c' with the
library object suffix, '.lo'."
        ;;

      execute)
        $ECHO \
"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...

Automatically set library path, then run a program.

This mode accepts the following additional options:

  -dlopen FILE      add the directory containing FILE to the library path

This mode sets the library path environment variable according to '-dlopen'
flags.

If any of the ARGS are libtool executable wrappers, then they are translated
into their corresponding uninstalled binary, and any of their required library
directories are added to the library path.

Then, COMMAND is executed, with ARGS as arguments."
        ;;

      finish)
        $ECHO \
"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...

Complete the installation of libtool libraries.

Each LIBDIR is a directory that contains libtool libraries.

The commands that this mode executes may require superuser privileges.  Use
the '--dry-run' option if you just want to see what would be executed."
        ;;

      install)
        $ECHO \
"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...

Install executables or libraries.

INSTALL-COMMAND is the installation command.  The first component should be
either the 'install' or 'cp' program.

The following components of INSTALL-COMMAND are treated specially:

  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation

The rest of the components are interpreted as arguments to that command (only
BSD-compatible install options are recognized)."
        ;;

      link)
        $ECHO \
"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...

Link object files or libraries together to form another library, or to
create an executable program.

LINK-COMMAND is a command using the C compiler that you would use to create
a program from several object files.

The following components of LINK-COMMAND are treated specially:

  -all-static       do not do any dynamic linking at all
  -avoid-version    do not add a version suffix if possible
  -bindir BINDIR    specify path to binaries directory (for systems where
                    libraries must be found in the PATH setting at runtime)
  -dlopen FILE      '-dlpreopen' FILE if it cannot be dlopened at runtime
  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
  -export-symbols SYMFILE
                    try to export only the symbols listed in SYMFILE
  -export-symbols-regex REGEX
                    try to export only the symbols matching REGEX
  -LLIBDIR          search LIBDIR for required installed libraries
  -lNAME            OUTPUT-FILE requires the installed library libNAME
  -module           build a library that can dlopened
  -no-fast-install  disable the fast-install mode
  -no-install       link a not-installable executable
  -no-undefined     declare that a library does not refer to external symbols
  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
  -objectlist FILE  use a list of object files found in FILE to specify objects
  -os2dllname NAME  force a short DLL name on OS/2 (no effect on other OSes)
  -precious-files-regex REGEX
                    don't remove output files matching REGEX
  -release RELEASE  specify package release information
  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
  -shared           only do dynamic linking of libtool libraries
  -shrext SUFFIX    override the standard shared library file extension
  -static           do not do any dynamic linking of uninstalled libtool libraries
  -static-libtool-libs
                    do not do any dynamic linking of libtool libraries
  -version-info CURRENT[:REVISION[:AGE]]
                    specify library version info [each variable defaults to 0]
  -weak LIBNAME     declare that the target provides the LIBNAME interface
  -Wc,FLAG
  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
  -Wl,FLAG
  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)

All other options (arguments beginning with '-') are ignored.

Every other argument is treated as a filename.  Files ending in '.la' are
treated as uninstalled libtool libraries, other files are standard or library
object files.

If the OUTPUT-FILE ends in '.la', then a libtool library is created,
only library objects ('.lo' files) may be specified, and '-rpath' is
required, except when creating a convenience library.

If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
using 'ar' and 'ranlib', or on Windows using 'lib'.

If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
is created, otherwise an executable program is created."
        ;;

      uninstall)
        $ECHO \
"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...

Remove libraries from an installation directory.

RM is the name of the program to use to delete files associated with each FILE
(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
to RM.

If FILE is a libtool library, all the files associated with it are deleted.
Otherwise, only FILE itself is deleted using RM."
        ;;

      *)
        func_fatal_help "invalid operation mode '$opt_mode'"
        ;;
    esac

    echo
    $ECHO "Try '$progname --help' for more information about other modes."
}

# Now that we've collected a possible --mode arg, show help if necessary
if $opt_help; then
  if test : = "$opt_help"; then
    func_mode_help
  else
    {
      func_help noexit
      for opt_mode in compile link execute install finish uninstall clean; do
        func_mode_help
      done
    } | $SED -n '1p; 2,$s/^Usage:/  or: /p'
    {
      func_help noexit
      for opt_mode in compile link execute install finish uninstall clean; do
        echo
        func_mode_help
      done
    } |
    $SED '1d
      /^When reporting/,/^Report/{
        H
        d
      }
      $x
      /information about other modes/d
      /more detailed .*MODE/d
      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
  fi
  exit $?
fi


# func_mode_execute arg...
func_mode_execute ()
{
    $debug_cmd

    # The first argument is the command name.
    cmd=$nonopt
    test -z "$cmd" && \
      func_fatal_help "you must specify a COMMAND"

    # Handle -dlopen flags immediately.
    for file in $opt_dlopen; do
      test -f "$file" \
        || func_fatal_help "'$file' is not a file"

      dir=
      case $file in
      *.la)
        func_resolve_sysroot "$file"
        file=$func_resolve_sysroot_result

        # Check to see that this really is a libtool archive.
        func_lalib_unsafe_p "$file" \
          || func_fatal_help "'$lib' is not a valid libtool archive"

        # Read the libtool library.
        dlname=
        library_names=
        func_source "$file"

        # Skip this library if it cannot be dlopened.
        if test -z "$dlname"; then
          # Warn if it was a shared library.
          test -n "$library_names" && \
            func_warning "'$file' was not linked with '-export-dynamic'"
          continue
        fi

        func_dirname "$file" "" "."
        dir=$func_dirname_result

        if test -f "$dir/$objdir/$dlname"; then
          func_append dir "/$objdir"
        else
          if test ! -f "$dir/$dlname"; then
            func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
          fi
        fi
        ;;

      *.lo)
        # Just add the directory containing the .lo file.
        func_dirname "$file" "" "."
        dir=$func_dirname_result
        ;;

      *)
        func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
        continue
        ;;
      esac

      # Get the absolute pathname.
      absdir=`cd "$dir" && pwd`
      test -n "$absdir" && dir=$absdir

      # Now add the directory to shlibpath_var.
      if eval "test -z \"\$$shlibpath_var\""; then
        eval "$shlibpath_var=\"\$dir\""
      else
        eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
      fi
    done

    # This variable tells wrapper scripts just to set shlibpath_var
    # rather than running their programs.
    libtool_execute_magic=$magic

    # Check if any of the arguments is a wrapper script.
    args=
    for file
    do
      case $file in
      -* | *.la | *.lo ) ;;
      *)
        # Do a test to see if this is really a libtool program.
        if func_ltwrapper_script_p "$file"; then
          func_source "$file"
          # Transform arg to wrapped name.
          file=$progdir/$program
        elif func_ltwrapper_executable_p "$file"; then
          func_ltwrapper_scriptname "$file"
          func_source "$func_ltwrapper_scriptname_result"
          # Transform arg to wrapped name.
          file=$progdir/$program
        fi
        ;;
      esac
      # Quote arguments (to preserve shell metacharacters).
      func_append_quoted args "$file"
    done

    if $opt_dry_run; then
      # Display what would be done.
      if test -n "$shlibpath_var"; then
        eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
        echo "export $shlibpath_var"
      fi
      $ECHO "$cmd$args"
      exit $EXIT_SUCCESS
    else
      if test -n "$shlibpath_var"; then
        # Export the shlibpath_var.
        eval "export $shlibpath_var"
      fi

      # Restore saved environment variables
      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
      do
        eval "if test \"\${save_$lt_var+set}\" = set; then
                $lt_var=\$save_$lt_var; export $lt_var
              else
                $lt_unset $lt_var
              fi"
      done

      # Now prepare to actually exec the command.
      exec_cmd=\$cmd$args
    fi
}

test execute = "$opt_mode" && func_mode_execute ${1+"$@"}


# func_mode_finish arg...
func_mode_finish ()
{
    $debug_cmd

    libs=
    libdirs=
    admincmds=

    for opt in "$nonopt" ${1+"$@"}
    do
      if test -d "$opt"; then
        func_append libdirs " $opt"

      elif test -f "$opt"; then
        if func_lalib_unsafe_p "$opt"; then
          func_append libs " $opt"
        else
          func_warning "'$opt' is not a valid libtool archive"
        fi

      else
        func_fatal_error "invalid argument '$opt'"
      fi
    done

    if test -n "$libs"; then
      if test -n "$lt_sysroot"; then
        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
      else
        sysroot_cmd=
      fi

      # Remove sysroot references
      if $opt_dry_run; then
        for lib in $libs; do
          echo "removing references to $lt_sysroot and '=' prefixes from $lib"
        done
      else
        tmpdir=`func_mktempdir`
        for lib in $libs; do
          $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
            > $tmpdir/tmp-la
          mv -f $tmpdir/tmp-la $lib
        done
        ${RM}r "$tmpdir"
      fi
    fi

    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
      for libdir in $libdirs; do
        if test -n "$finish_cmds"; then
          # Do each command in the finish commands.
          func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
'"$cmd"'"'
        fi
        if test -n "$finish_eval"; then
          # Do the single finish_eval.
          eval cmds=\"$finish_eval\"
          $opt_dry_run || eval "$cmds" || func_append admincmds "
       $cmds"
        fi
      done
    fi

    # Exit here if they wanted silent mode.
    $opt_quiet && exit $EXIT_SUCCESS

    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
      echo "----------------------------------------------------------------------"
      echo "Libraries have been installed in:"
      for libdir in $libdirs; do
        $ECHO "   $libdir"
      done
      echo
      echo "If you ever happen to want to link against installed libraries"
      echo "in a given directory, LIBDIR, you must either use libtool, and"
      echo "specify the full pathname of the library, or use the '-LLIBDIR'"
      echo "flag during linking and do at least one of the following:"
      if test -n "$shlibpath_var"; then
        echo "   - add LIBDIR to the '$shlibpath_var' environment variable"
        echo "     during execution"
      fi
      if test -n "$runpath_var"; then
        echo "   - add LIBDIR to the '$runpath_var' environment variable"
        echo "     during linking"
      fi
      if test -n "$hardcode_libdir_flag_spec"; then
        libdir=LIBDIR
        eval flag=\"$hardcode_libdir_flag_spec\"

        $ECHO "   - use the '$flag' linker flag"
      fi
      if test -n "$admincmds"; then
        $ECHO "   - have your system administrator run these commands:$admincmds"
      fi
      if test -f /etc/ld.so.conf; then
        echo "   - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
      fi
      echo

      echo "See any operating system documentation about shared libraries for"
      case $host in
        solaris2.[6789]|solaris2.1[0-9])
          echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
          echo "pages."
          ;;
        *)
          echo "more information, such as the ld(1) and ld.so(8) manual pages."
          ;;
      esac
      echo "----------------------------------------------------------------------"
    fi
    exit $EXIT_SUCCESS
}

test finish = "$opt_mode" && func_mode_finish ${1+"$@"}


# func_mode_install arg...
func_mode_install ()
{
    $debug_cmd

    # There may be an optional sh(1) argument at the beginning of
    # install_prog (especially on Windows NT).
    if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
       # Allow the use of GNU shtool's install command.
       case $nonopt in *shtool*) :;; *) false;; esac
    then
      # Aesthetically quote it.
      func_quote_for_eval "$nonopt"
      install_prog="$func_quote_for_eval_result "
      arg=$1
      shift
    else
      install_prog=
      arg=$nonopt
    fi

    # The real first argument should be the name of the installation program.
    # Aesthetically quote it.
    func_quote_for_eval "$arg"
    func_append install_prog "$func_quote_for_eval_result"
    install_shared_prog=$install_prog
    case " $install_prog " in
      *[\\\ /]cp\ *) install_cp=: ;;
      *) install_cp=false ;;
    esac

    # We need to accept at least all the BSD install flags.
    dest=
    files=
    opts=
    prev=
    install_type=
    isdir=false
    stripme=
    no_mode=:
    for arg
    do
      arg2=
      if test -n "$dest"; then
        func_append files " $dest"
        dest=$arg
        continue
      fi

      case $arg in
      -d) isdir=: ;;
      -f)
        if $install_cp; then :; else
          prev=$arg
        fi
        ;;
      -g | -m | -o)
        prev=$arg
        ;;
      -s)
        stripme=" -s"
        continue
        ;;
      -*)
        ;;
      *)
        # If the previous option needed an argument, then skip it.
        if test -n "$prev"; then
          if test X-m = "X$prev" && test -n "$install_override_mode"; then
            arg2=$install_override_mode
            no_mode=false
          fi
          prev=
        else
          dest=$arg
          continue
        fi
        ;;
      esac

      # Aesthetically quote the argument.
      func_quote_for_eval "$arg"
      func_append install_prog " $func_quote_for_eval_result"
      if test -n "$arg2"; then
        func_quote_for_eval "$arg2"
      fi
      func_append install_shared_prog " $func_quote_for_eval_result"
    done

    test -z "$install_prog" && \
      func_fatal_help "you must specify an install program"

    test -n "$prev" && \
      func_fatal_help "the '$prev' option requires an argument"

    if test -n "$install_override_mode" && $no_mode; then
      if $install_cp; then :; else
        func_quote_for_eval "$install_override_mode"
        func_append install_shared_prog " -m $func_quote_for_eval_result"
      fi
    fi

    if test -z "$files"; then
      if test -z "$dest"; then
        func_fatal_help "no file or destination specified"
      else
        func_fatal_help "you must specify a destination"
      fi
    fi

    # Strip any trailing slash from the destination.
    func_stripname '' '/' "$dest"
    dest=$func_stripname_result

    # Check to see that the destination is a directory.
    test -d "$dest" && isdir=:
    if $isdir; then
      destdir=$dest
      destname=
    else
      func_dirname_and_basename "$dest" "" "."
      destdir=$func_dirname_result
      destname=$func_basename_result

      # Not a directory, so check to see that there is only one file specified.
      set dummy $files; shift
      test "$#" -gt 1 && \
        func_fatal_help "'$dest' is not a directory"
    fi
    case $destdir in
    [\\/]* | [A-Za-z]:[\\/]*) ;;
    *)
      for file in $files; do
        case $file in
        *.lo) ;;
        *)
          func_fatal_help "'$destdir' must be an absolute directory name"
          ;;
        esac
      done
      ;;
    esac

    # This variable tells wrapper scripts just to set variables rather
    # than running their programs.
    libtool_install_magic=$magic

    staticlibs=
    future_libdirs=
    current_libdirs=
    for file in $files; do

      # Do each installation.
      case $file in
      *.$libext)
        # Do the static libraries later.
        func_append staticlibs " $file"
        ;;

      *.la)
        func_resolve_sysroot "$file"
        file=$func_resolve_sysroot_result

        # Check to see that this really is a libtool archive.
        func_lalib_unsafe_p "$file" \
          || func_fatal_help "'$file' is not a valid libtool archive"

        library_names=
        old_library=
        relink_command=
        func_source "$file"

        # Add the libdir to current_libdirs if it is the destination.
        if test "X$destdir" = "X$libdir"; then
          case "$current_libdirs " in
          *" $libdir "*) ;;
          *) func_append current_libdirs " $libdir" ;;
          esac
        else
          # Note the libdir as a future libdir.
          case "$future_libdirs " in
          *" $libdir "*) ;;
          *) func_append future_libdirs " $libdir" ;;
          esac
        fi

        func_dirname "$file" "/" ""
        dir=$func_dirname_result
        func_append dir "$objdir"

        if test -n "$relink_command"; then
          # Determine the prefix the user has applied to our future dir.
          inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`

          # Don't allow the user to place us outside of our expected
          # location b/c this prevents finding dependent libraries that
          # are installed to the same prefix.
          # At present, this check doesn't affect windows .dll's that
          # are installed into $libdir/../bin (currently, that works fine)
          # but it's something to keep an eye on.
          test "$inst_prefix_dir" = "$destdir" && \
            func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"

          if test -n "$inst_prefix_dir"; then
            # Stick the inst_prefix_dir data into the link command.
            relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
          else
            relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
          fi

          func_warning "relinking '$file'"
          func_show_eval "$relink_command" \
            'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
        fi

        # See the names of the shared library.
        set dummy $library_names; shift
        if test -n "$1"; then
          realname=$1
          shift

          srcname=$realname
          test -n "$relink_command" && srcname=${realname}T

          # Install the shared library and build the symlinks.
          func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
              'exit $?'
          tstripme=$stripme
          case $host_os in
          cygwin* | mingw* | pw32* | cegcc*)
            case $realname in
            *.dll.a)
              tstripme=
              ;;
            esac
            ;;
          os2*)
            case $realname in
            *_dll.a)
              tstripme=
              ;;
            esac
            ;;
          esac
          if test -n "$tstripme" && test -n "$striplib"; then
            func_show_eval "$striplib $destdir/$realname" 'exit $?'
          fi

          if test "$#" -gt 0; then
            # Delete the old symlinks, and create new ones.
            # Try 'ln -sf' first, because the 'ln' binary might depend on
            # the symlink we replace!  Solaris /bin/ln does not understand -f,
            # so we also need to try rm && ln -s.
            for linkname
            do
              test "$linkname" != "$realname" \
                && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
            done
          fi

          # Do each command in the postinstall commands.
          lib=$destdir/$realname
          func_execute_cmds "$postinstall_cmds" 'exit $?'
        fi

        # Install the pseudo-library for information purposes.
        func_basename "$file"
        name=$func_basename_result
        instname=$dir/${name}i
        func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'

        # Maybe install the static library, too.
        test -n "$old_library" && func_append staticlibs " $dir/$old_library"
        ;;

      *.lo)
        # Install (i.e. copy) a libtool object.

        # Figure out destination file name, if it wasn't already specified.
        if test -n "$destname"; then
          destfile=$destdir/$destname
        else
          func_basename "$file"
          destfile=$func_basename_result
          destfile=$destdir/$destfile
        fi

        # Deduce the name of the destination old-style object file.
        case $destfile in
        *.lo)
          func_lo2o "$destfile"
          staticdest=$func_lo2o_result
          ;;
        *.$objext)
          staticdest=$destfile
          destfile=
          ;;
        *)
          func_fatal_help "cannot copy a libtool object to '$destfile'"
          ;;
        esac

        # Install the libtool object if requested.
        test -n "$destfile" && \
          func_show_eval "$install_prog $file $destfile" 'exit $?'

        # Install the old object if enabled.
        if test yes = "$build_old_libs"; then
          # Deduce the name of the old-style object file.
          func_lo2o "$file"
          staticobj=$func_lo2o_result
          func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
        fi
        exit $EXIT_SUCCESS
        ;;

      *)
        # Figure out destination file name, if it wasn't already specified.
        if test -n "$destname"; then
          destfile=$destdir/$destname
        else
          func_basename "$file"
          destfile=$func_basename_result
          destfile=$destdir/$destfile
        fi

        # If the file is missing, and there is a .exe on the end, strip it
        # because it is most likely a libtool script we actually want to
        # install
        stripped_ext=
        case $file in
          *.exe)
            if test ! -f "$file"; then
              func_stripname '' '.exe' "$file"
              file=$func_stripname_result
              stripped_ext=.exe
            fi
            ;;
        esac

        # Do a test to see if this is really a libtool program.
        case $host in
        *cygwin* | *mingw*)
            if func_ltwrapper_executable_p "$file"; then
              func_ltwrapper_scriptname "$file"
              wrapper=$func_ltwrapper_scriptname_result
            else
              func_stripname '' '.exe' "$file"
              wrapper=$func_stripname_result
            fi
            ;;
        *)
            wrapper=$file
            ;;
        esac
        if func_ltwrapper_script_p "$wrapper"; then
          notinst_deplibs=
          relink_command=

          func_source "$wrapper"

          # Check the variables that should have been set.
          test -z "$generated_by_libtool_version" && \
            func_fatal_error "invalid libtool wrapper script '$wrapper'"

          finalize=:
          for lib in $notinst_deplibs; do
            # Check to see that each library is installed.
            libdir=
            if test -f "$lib"; then
              func_source "$lib"
            fi
            libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
            if test -n "$libdir" && test ! -f "$libfile"; then
              func_warning "'$lib' has not been installed in '$libdir'"
              finalize=false
            fi
          done

          relink_command=
          func_source "$wrapper"

          outputname=
          if test no = "$fast_install" && test -n "$relink_command"; then
            $opt_dry_run || {
              if $finalize; then
                tmpdir=`func_mktempdir`
                func_basename "$file$stripped_ext"
                file=$func_basename_result
                outputname=$tmpdir/$file
                # Replace the output file specification.
                relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`

                $opt_quiet || {
                  func_quote_for_expand "$relink_command"
                  eval "func_echo $func_quote_for_expand_result"
                }
                if eval "$relink_command"; then :
                  else
                  func_error "error: relink '$file' with the above command before installing it"
                  $opt_dry_run || ${RM}r "$tmpdir"
                  continue
                fi
                file=$outputname
              else
                func_warning "cannot relink '$file'"
              fi
            }
          else
            # Install the binary that we compiled earlier.
            file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
          fi
        fi

        # remove .exe since cygwin /usr/bin/install will append another
        # one anyway
        case $install_prog,$host in
        */usr/bin/install*,*cygwin*)
          case $file:$destfile in
          *.exe:*.exe)
            # this is ok
            ;;
          *.exe:*)
            destfile=$destfile.exe
            ;;
          *:*.exe)
            func_stripname '' '.exe' "$destfile"
            destfile=$func_stripname_result
            ;;
          esac
          ;;
        esac
        func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
        $opt_dry_run || if test -n "$outputname"; then
          ${RM}r "$tmpdir"
        fi
        ;;
      esac
    done

    for file in $staticlibs; do
      func_basename "$file"
      name=$func_basename_result

      # Set up the ranlib parameters.
      oldlib=$destdir/$name
      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
      tool_oldlib=$func_to_tool_file_result

      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'

      if test -n "$stripme" && test -n "$old_striplib"; then
        func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
      fi

      # Do each command in the postinstall commands.
      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
    done

    test -n "$future_libdirs" && \
      func_warning "remember to run '$progname --finish$future_libdirs'"

    if test -n "$current_libdirs"; then
      # Maybe just do a dry run.
      $opt_dry_run && current_libdirs=" -n$current_libdirs"
      exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
    else
      exit $EXIT_SUCCESS
    fi
}

test install = "$opt_mode" && func_mode_install ${1+"$@"}


# func_generate_dlsyms outputname originator pic_p
# Extract symbols from dlprefiles and create ${outputname}S.o with
# a dlpreopen symbol table.
func_generate_dlsyms ()
{
    $debug_cmd

    my_outputname=$1
    my_originator=$2
    my_pic_p=${3-false}
    my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
    my_dlsyms=

    if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
      if test -n "$NM" && test -n "$global_symbol_pipe"; then
        my_dlsyms=${my_outputname}S.c
      else
        func_error "not configured to extract global symbols from dlpreopened files"
      fi
    fi

    if test -n "$my_dlsyms"; then
      case $my_dlsyms in
      "") ;;
      *.c)
        # Discover the nlist of each of the dlfiles.
        nlist=$output_objdir/$my_outputname.nm

        func_show_eval "$RM $nlist ${nlist}S ${nlist}T"

        # Parse the name list into a source file.
        func_verbose "creating $output_objdir/$my_dlsyms"

        $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */

#ifdef __cplusplus
extern \"C\" {
#endif

#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
#endif

/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
/* DATA imports from DLLs on WIN32 can't be const, because runtime
   relocations are performed -- see ld's documentation on pseudo-relocs.  */
# define LT_DLSYM_CONST
#elif defined __osf__
/* This system does not cope well with relocations in const data.  */
# define LT_DLSYM_CONST
#else
# define LT_DLSYM_CONST const
#endif

#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)

/* External symbol declarations for the compiler. */\
"

        if test yes = "$dlself"; then
          func_verbose "generating symbol list for '$output'"

          $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"

          # Add our own program objects to the symbol list.
          progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
          for progfile in $progfiles; do
            func_to_tool_file "$progfile" func_convert_file_msys_to_w32
            func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
            $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
          done

          if test -n "$exclude_expsyms"; then
            $opt_dry_run || {
              eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
              eval '$MV "$nlist"T "$nlist"'
            }
          fi

          if test -n "$export_symbols_regex"; then
            $opt_dry_run || {
              eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
              eval '$MV "$nlist"T "$nlist"'
            }
          fi

          # Prepare the list of exported symbols
          if test -z "$export_symbols"; then
            export_symbols=$output_objdir/$outputname.exp
            $opt_dry_run || {
              $RM $export_symbols
              eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
              case $host in
              *cygwin* | *mingw* | *cegcc* )
                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
                ;;
              esac
            }
          else
            $opt_dry_run || {
              eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
              eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
              eval '$MV "$nlist"T "$nlist"'
              case $host in
                *cygwin* | *mingw* | *cegcc* )
                  eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
                  eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
                  ;;
              esac
            }
          fi
        fi

        for dlprefile in $dlprefiles; do
          func_verbose "extracting global C symbols from '$dlprefile'"
          func_basename "$dlprefile"
          name=$func_basename_result
          case $host in
            *cygwin* | *mingw* | *cegcc* )
              # if an import library, we need to obtain dlname
              if func_win32_import_lib_p "$dlprefile"; then
                func_tr_sh "$dlprefile"
                eval "curr_lafile=\$libfile_$func_tr_sh_result"
                dlprefile_dlbasename=
                if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
                  # Use subshell, to avoid clobbering current variable values
                  dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
                  if test -n "$dlprefile_dlname"; then
                    func_basename "$dlprefile_dlname"
                    dlprefile_dlbasename=$func_basename_result
                  else
                    # no lafile. user explicitly requested -dlpreopen <import library>.
                    $sharedlib_from_linklib_cmd "$dlprefile"
                    dlprefile_dlbasename=$sharedlib_from_linklib_result
                  fi
                fi
                $opt_dry_run || {
                  if test -n "$dlprefile_dlbasename"; then
                    eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
                  else
                    func_warning "Could not compute DLL name from $name"
                    eval '$ECHO ": $name " >> "$nlist"'
                  fi
                  func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
                  eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
                    $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
                }
              else # not an import lib
                $opt_dry_run || {
                  eval '$ECHO ": $name " >> "$nlist"'
                  func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
                  eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
                }
              fi
            ;;
            *)
              $opt_dry_run || {
                eval '$ECHO ": $name " >> "$nlist"'
                func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
                eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
              }
            ;;
          esac
        done

        $opt_dry_run || {
          # Make sure we have at least an empty file.
          test -f "$nlist" || : > "$nlist"

          if test -n "$exclude_expsyms"; then
            $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
            $MV "$nlist"T "$nlist"
          fi

          # Try sorting and uniquifying the output.
          if $GREP -v "^: " < "$nlist" |
              if sort -k 3 </dev/null >/dev/null 2>&1; then
                sort -k 3
              else
                sort +2
              fi |
              uniq > "$nlist"S; then
            :
          else
            $GREP -v "^: " < "$nlist" > "$nlist"S
          fi

          if test -f "$nlist"S; then
            eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
          else
            echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
          fi

          func_show_eval '$RM "${nlist}I"'
          if test -n "$global_symbol_to_import"; then
            eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
          fi

          echo >> "$output_objdir/$my_dlsyms" "\

/* The mapping between symbol names and symbols.  */
typedef struct {
  const char *name;
  void *address;
} lt_dlsymlist;
extern LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[];\
"

          if test -s "$nlist"I; then
            echo >> "$output_objdir/$my_dlsyms" "\
static void lt_syminit(void)
{
  LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
  for (; symbol->name; ++symbol)
    {"
            $SED 's/.*/      if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
            echo >> "$output_objdir/$my_dlsyms" "\
    }
}"
          fi
          echo >> "$output_objdir/$my_dlsyms" "\
LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
{ {\"$my_originator\", (void *) 0},"

          if test -s "$nlist"I; then
            echo >> "$output_objdir/$my_dlsyms" "\
  {\"@INIT@\", (void *) &lt_syminit},"
          fi

          case $need_lib_prefix in
          no)
            eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
            ;;
          *)
            eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
            ;;
          esac
          echo >> "$output_objdir/$my_dlsyms" "\
  {0, (void *) 0}
};

/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
  return lt_${my_prefix}_LTX_preloaded_symbols;
}
#endif

#ifdef __cplusplus
}
#endif\
"
        } # !$opt_dry_run

        pic_flag_for_symtable=
        case "$compile_command " in
        *" -static "*) ;;
        *)
          case $host in
          # compiling the symbol table file with pic_flag works around
          # a FreeBSD bug that causes programs to crash when -lm is
          # linked before any other PIC object.  But we must not use
          # pic_flag when linking with -static.  The problem exists in
          # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
          *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
            pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
          *-*-hpux*)
            pic_flag_for_symtable=" $pic_flag"  ;;
          *)
            $my_pic_p && pic_flag_for_symtable=" $pic_flag"
            ;;
          esac
          ;;
        esac
        symtab_cflags=
        for arg in $LTCFLAGS; do
          case $arg in
          -pie | -fpie | -fPIE) ;;
          *) func_append symtab_cflags " $arg" ;;
          esac
        done

        # Now compile the dynamic symbol file.
        func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'

        # Clean up the generated files.
        func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'

        # Transform the symbol file into the correct name.
        symfileobj=$output_objdir/${my_outputname}S.$objext
        case $host in
        *cygwin* | *mingw* | *cegcc* )
          if test -f "$output_objdir/$my_outputname.def"; then
            compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
            finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
          else
            compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
            finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
          fi
          ;;
        *)
          compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
          finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
          ;;
        esac
        ;;
      *)
        func_fatal_error "unknown suffix for '$my_dlsyms'"
        ;;
      esac
    else
      # We keep going just in case the user didn't refer to
      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
      # really was required.

      # Nullify the symbol file.
      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
    fi
}

# func_cygming_gnu_implib_p ARG
# This predicate returns with zero status (TRUE) if
# ARG is a GNU/binutils-style import library. Returns
# with nonzero status (FALSE) otherwise.
func_cygming_gnu_implib_p ()
{
  $debug_cmd

  func_to_tool_file "$1" func_convert_file_msys_to_w32
  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
  test -n "$func_cygming_gnu_implib_tmp"
}

# func_cygming_ms_implib_p ARG
# This predicate returns with zero status (TRUE) if
# ARG is an MS-style import library. Returns
# with nonzero status (FALSE) otherwise.
func_cygming_ms_implib_p ()
{
  $debug_cmd

  func_to_tool_file "$1" func_convert_file_msys_to_w32
  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
  test -n "$func_cygming_ms_implib_tmp"
}

# func_win32_libid arg
# return the library type of file 'arg'
#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
# Despite the name, also deal with 64 bit binaries.
func_win32_libid ()
{
  $debug_cmd

  win32_libid_type=unknown
  win32_fileres=`file -L $1 2>/dev/null`
  case $win32_fileres in
  *ar\ archive\ import\ library*) # definitely import
    win32_libid_type="x86 archive import"
    ;;
  *ar\ archive*) # could be an import, or static
    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
      case $nm_interface in
      "MS dumpbin")
        if func_cygming_ms_implib_p "$1" ||
           func_cygming_gnu_implib_p "$1"
        then
          win32_nmres=import
        else
          win32_nmres=
        fi
        ;;
      *)
        func_to_tool_file "$1" func_convert_file_msys_to_w32
        win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
          $SED -n -e '
            1,100{
                / I /{
                    s|.*|import|
                    p
                    q
                }
            }'`
        ;;
      esac
      case $win32_nmres in
      import*)  win32_libid_type="x86 archive import";;
      *)        win32_libid_type="x86 archive static";;
      esac
    fi
    ;;
  *DLL*)
    win32_libid_type="x86 DLL"
    ;;
  *executable*) # but shell scripts are "executable" too...
    case $win32_fileres in
    *MS\ Windows\ PE\ Intel*)
      win32_libid_type="x86 DLL"
      ;;
    esac
    ;;
  esac
  $ECHO "$win32_libid_type"
}

# func_cygming_dll_for_implib ARG
#
# Platform-specific function to extract the
# name of the DLL associated with the specified
# import library ARG.
# Invoked by eval'ing the libtool variable
#    $sharedlib_from_linklib_cmd
# Result is available in the variable
#    $sharedlib_from_linklib_result
func_cygming_dll_for_implib ()
{
  $debug_cmd

  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
}

# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
#
# The is the core of a fallback implementation of a
# platform-specific function to extract the name of the
# DLL associated with the specified import library LIBNAME.
#
# SECTION_NAME is either .idata$6 or .idata$7, depending
# on the platform and compiler that created the implib.
#
# Echos the name of the DLL associated with the
# specified import library.
func_cygming_dll_for_implib_fallback_core ()
{
  $debug_cmd

  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
    $SED '/^Contents of section '"$match_literal"':/{
      # Place marker at beginning of archive member dllname section
      s/.*/====MARK====/
      p
      d
    }
    # These lines can sometimes be longer than 43 characters, but
    # are always uninteresting
    /:[  ]*file format pe[i]\{,1\}-/d
    /^In archive [^:]*:/d
    # Ensure marker is printed
    /^====MARK====/p
    # Remove all lines with less than 43 characters
    /^.\{43\}/!d
    # From remaining lines, remove first 43 characters
    s/^.\{43\}//' |
    $SED -n '
      # Join marker and all lines until next marker into a single line
      /^====MARK====/ b para
      H
      $ b para
      b
      :para
      x
      s/\n//g
      # Remove the marker
      s/^====MARK====//
      # Remove trailing dots and whitespace
      s/[\. \t]*$//
      # Print
      /./p' |
    # we now have a list, one entry per line, of the stringified
    # contents of the appropriate section of all members of the
    # archive that possess that section. Heuristic: eliminate
    # all those that have a first or second character that is
    # a '.' (that is, objdump's representation of an unprintable
    # character.) This should work for all archives with less than
    # 0x302f exports -- but will fail for DLLs whose name actually
    # begins with a literal '.' or a single character followed by
    # a '.'.
    #
    # Of those that remain, print the first one.
    $SED -e '/^\./d;/^.\./d;q'
}

# func_cygming_dll_for_implib_fallback ARG
# Platform-specific function to extract the
# name of the DLL associated with the specified
# import library ARG.
#
# This fallback implementation is for use when $DLLTOOL
# does not support the --identify-strict option.
# Invoked by eval'ing the libtool variable
#    $sharedlib_from_linklib_cmd
# Result is available in the variable
#    $sharedlib_from_linklib_result
func_cygming_dll_for_implib_fallback ()
{
  $debug_cmd

  if func_cygming_gnu_implib_p "$1"; then
    # binutils import library
    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
  elif func_cygming_ms_implib_p "$1"; then
    # ms-generated import library
    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
  else
    # unknown
    sharedlib_from_linklib_result=
  fi
}


# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
    $debug_cmd

    f_ex_an_ar_dir=$1; shift
    f_ex_an_ar_oldlib=$1
    if test yes = "$lock_old_archive_extraction"; then
      lockfile=$f_ex_an_ar_oldlib.lock
      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
        func_echo "Waiting for $lockfile to be removed"
        sleep 2
      done
    fi
    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
                   'stat=$?; rm -f "$lockfile"; exit $stat'
    if test yes = "$lock_old_archive_extraction"; then
      $opt_dry_run || rm -f "$lockfile"
    fi
    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
     :
    else
      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
    fi
}


# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
    $debug_cmd

    my_gentop=$1; shift
    my_oldlibs=${1+"$@"}
    my_oldobjs=
    my_xlib=
    my_xabs=
    my_xdir=

    for my_xlib in $my_oldlibs; do
      # Extract the objects.
      case $my_xlib in
        [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
        *) my_xabs=`pwd`"/$my_xlib" ;;
      esac
      func_basename "$my_xlib"
      my_xlib=$func_basename_result
      my_xlib_u=$my_xlib
      while :; do
        case " $extracted_archives " in
        *" $my_xlib_u "*)
          func_arith $extracted_serial + 1
          extracted_serial=$func_arith_result
          my_xlib_u=lt$extracted_serial-$my_xlib ;;
        *) break ;;
        esac
      done
      extracted_archives="$extracted_archives $my_xlib_u"
      my_xdir=$my_gentop/$my_xlib_u

      func_mkdir_p "$my_xdir"

      case $host in
      *-darwin*)
        func_verbose "Extracting $my_xabs"
        # Do not bother doing anything if just a dry run
        $opt_dry_run || {
          darwin_orig_dir=`pwd`
          cd $my_xdir || exit $?
          darwin_archive=$my_xabs
          darwin_curdir=`pwd`
          func_basename "$darwin_archive"
          darwin_base_archive=$func_basename_result
          darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
          if test -n "$darwin_arches"; then
            darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
            darwin_arch=
            func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
            for darwin_arch in  $darwin_arches; do
              func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
              $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
              cd "unfat-$$/$darwin_base_archive-$darwin_arch"
              func_extract_an_archive "`pwd`" "$darwin_base_archive"
              cd "$darwin_curdir"
              $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
            done # $darwin_arches
            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
            darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
            darwin_file=
            darwin_files=
            for darwin_file in $darwin_filelist; do
              darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
              $LIPO -create -output "$darwin_file" $darwin_files
            done # $darwin_filelist
            $RM -rf unfat-$$
            cd "$darwin_orig_dir"
          else
            cd $darwin_orig_dir
            func_extract_an_archive "$my_xdir" "$my_xabs"
          fi # $darwin_arches
        } # !$opt_dry_run
        ;;
      *)
        func_extract_an_archive "$my_xdir" "$my_xabs"
        ;;
      esac
      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
    done

    func_extract_archives_result=$my_oldobjs
}


# func_emit_wrapper [arg=no]
#
# Emit a libtool wrapper script on stdout.
# Don't directly open a file because we may want to
# incorporate the script contents within a cygwin/mingw
# wrapper executable.  Must ONLY be called from within
# func_mode_link because it depends on a number of variables
# set therein.
#
# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
# variable will take.  If 'yes', then the emitted script
# will assume that the directory where it is stored is
# the $objdir directory.  This is a cygwin/mingw-specific
# behavior.
func_emit_wrapper ()
{
        func_emit_wrapper_arg1=${1-no}

        $ECHO "\
#! $SHELL

# $output - temporary wrapper script for $objdir/$outputname
# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
#
# This wrapper script should never be moved out of the build directory.
# If it is, it will not operate correctly.

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
sed_quote_subst='$sed_quote_subst'

# Be Bourne compatible
if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '\${1+\"\$@\"}'='\"\$@\"'
  setopt NO_GLOB_SUBST
else
  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
fi
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

relink_command=\"$relink_command\"

# This environment variable determines our operation mode.
if test \"\$libtool_install_magic\" = \"$magic\"; then
  # install mode needs the following variables:
  generated_by_libtool_version='$macro_version'
  notinst_deplibs='$notinst_deplibs'
else
  # When we are sourced in execute mode, \$file and \$ECHO are already set.
  if test \"\$libtool_execute_magic\" != \"$magic\"; then
    file=\"\$0\""

    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
    $ECHO "\

# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
  eval 'cat <<_LTECHO_EOF
\$1
_LTECHO_EOF'
}
    ECHO=\"$qECHO\"
  fi

# Very basic option parsing. These options are (a) specific to
# the libtool wrapper, (b) are identical between the wrapper
# /script/ and the wrapper /executable/ that is used only on
# windows platforms, and (c) all begin with the string "--lt-"
# (application programs are unlikely to have options that match
# this pattern).
#
# There are only two supported options: --lt-debug and
# --lt-dump-script. There is, deliberately, no --lt-help.
#
# The first argument to this parsing function should be the
# script's $0 value, followed by "$@".
lt_option_debug=
func_parse_lt_options ()
{
  lt_script_arg0=\$0
  shift
  for lt_opt
  do
    case \"\$lt_opt\" in
    --lt-debug) lt_option_debug=1 ;;
    --lt-dump-script)
        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
        cat \"\$lt_dump_D/\$lt_dump_F\"
        exit 0
      ;;
    --lt-*)
        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
        exit 1
      ;;
    esac
  done

  # Print the debug banner immediately:
  if test -n \"\$lt_option_debug\"; then
    echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
  fi
}

# Used when --lt-debug. Prints its arguments to stdout
# (redirection is the responsibility of the caller)
func_lt_dump_args ()
{
  lt_dump_args_N=1;
  for lt_arg
  do
    \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
  done
}

# Core function for launching the target application
func_exec_program_core ()
{
"
  case $host in
  # Backslashes separate directories on plain windows
  *-*-mingw | *-*-os2* | *-cegcc*)
    $ECHO "\
      if test -n \"\$lt_option_debug\"; then
        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
        func_lt_dump_args \${1+\"\$@\"} 1>&2
      fi
      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
"
    ;;

  *)
    $ECHO "\
      if test -n \"\$lt_option_debug\"; then
        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
        func_lt_dump_args \${1+\"\$@\"} 1>&2
      fi
      exec \"\$progdir/\$program\" \${1+\"\$@\"}
"
    ;;
  esac
  $ECHO "\
      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
      exit 1
}

# A function to encapsulate launching the target application
# Strips options in the --lt-* namespace from \$@ and
# launches target application with the remaining arguments.
func_exec_program ()
{
  case \" \$* \" in
  *\\ --lt-*)
    for lt_wr_arg
    do
      case \$lt_wr_arg in
      --lt-*) ;;
      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
      esac
      shift
    done ;;
  esac
  func_exec_program_core \${1+\"\$@\"}
}

  # Parse options
  func_parse_lt_options \"\$0\" \${1+\"\$@\"}

  # Find the directory that this script lives in.
  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
  test \"x\$thisdir\" = \"x\$file\" && thisdir=.

  # Follow symbolic links until we get to the real thisdir.
  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
  while test -n \"\$file\"; do
    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`

    # If there was a directory component, then change thisdir.
    if test \"x\$destdir\" != \"x\$file\"; then
      case \"\$destdir\" in
      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
      *) thisdir=\"\$thisdir/\$destdir\" ;;
      esac
    fi

    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
  done

  # Usually 'no', except on cygwin/mingw when embedded into
  # the cwrapper.
  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
    # special case for '.'
    if test \"\$thisdir\" = \".\"; then
      thisdir=\`pwd\`
    fi
    # remove .libs from thisdir
    case \"\$thisdir\" in
    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
    $objdir )   thisdir=. ;;
    esac
  fi

  # Try to get the absolute directory name.
  absdir=\`cd \"\$thisdir\" && pwd\`
  test -n \"\$absdir\" && thisdir=\"\$absdir\"
"

        if test yes = "$fast_install"; then
          $ECHO "\
  program=lt-'$outputname'$exeext
  progdir=\"\$thisdir/$objdir\"

  if test ! -f \"\$progdir/\$program\" ||
     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
       test \"X\$file\" != \"X\$progdir/\$program\"; }; then

    file=\"\$\$-\$program\"

    if test ! -d \"\$progdir\"; then
      $MKDIR \"\$progdir\"
    else
      $RM \"\$progdir/\$file\"
    fi"

          $ECHO "\

    # relink executable if necessary
    if test -n \"\$relink_command\"; then
      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
      else
        \$ECHO \"\$relink_command_output\" >&2
        $RM \"\$progdir/\$file\"
        exit 1
      fi
    fi

    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
    { $RM \"\$progdir/\$program\";
      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
    $RM \"\$progdir/\$file\"
  fi"
        else
          $ECHO "\
  program='$outputname'
  progdir=\"\$thisdir/$objdir\"
"
        fi

        $ECHO "\

  if test -f \"\$progdir/\$program\"; then"

        # fixup the dll searchpath if we need to.
        #
        # Fix the DLL searchpath if we need to.  Do this before prepending
        # to shlibpath, because on Windows, both are PATH and uninstalled
        # libraries must come first.
        if test -n "$dllsearchpath"; then
          $ECHO "\
    # Add the dll search path components to the executable PATH
    PATH=$dllsearchpath:\$PATH
"
        fi

        # Export our shlibpath_var if we have one.
        if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
          $ECHO "\
    # Add our own library path to $shlibpath_var
    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"

    # Some systems cannot cope with colon-terminated $shlibpath_var
    # The second colon is a workaround for a bug in BeOS R4 sed
    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`

    export $shlibpath_var
"
        fi

        $ECHO "\
    if test \"\$libtool_execute_magic\" != \"$magic\"; then
      # Run the actual program with our arguments.
      func_exec_program \${1+\"\$@\"}
    fi
  else
    # The program doesn't exist.
    \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
    exit 1
  fi
fi\
"
}


# func_emit_cwrapperexe_src
# emit the source code for a wrapper executable on stdout
# Must ONLY be called from within func_mode_link because
# it depends on a number of variable set therein.
func_emit_cwrapperexe_src ()
{
        cat <<EOF

/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
   Generated by $PROGRAM (GNU $PACKAGE) $VERSION

   The $output program cannot be directly executed until all the libtool
   libraries that it depends on are installed.

   This wrapper executable should never be moved out of the build directory.
   If it is, it will not operate correctly.
*/
EOF
            cat <<"EOF"
#ifdef _MSC_VER
# define _CRT_SECURE_NO_DEPRECATE 1
#endif
#include <stdio.h>
#include <stdlib.h>
#ifdef _MSC_VER
# include <direct.h>
# include <process.h>
# include <io.h>
#else
# include <unistd.h>
# include <stdint.h>
# ifdef __CYGWIN__
#  include <io.h>
# endif
#endif
#include <malloc.h>
#include <stdarg.h>
#include <assert.h>
#include <string.h>
#include <ctype.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/stat.h>

#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)

/* declarations of non-ANSI functions */
#if defined __MINGW32__
# ifdef __STRICT_ANSI__
int _putenv (const char *);
# endif
#elif defined __CYGWIN__
# ifdef __STRICT_ANSI__
char *realpath (const char *, char *);
int putenv (char *);
int setenv (const char *, const char *, int);
# endif
/* #elif defined other_platform || defined ... */
#endif

/* portability defines, excluding path handling macros */
#if defined _MSC_VER
# define setmode _setmode
# define stat    _stat
# define chmod   _chmod
# define getcwd  _getcwd
# define putenv  _putenv
# define S_IXUSR _S_IEXEC
#elif defined __MINGW32__
# define setmode _setmode
# define stat    _stat
# define chmod   _chmod
# define getcwd  _getcwd
# define putenv  _putenv
#elif defined __CYGWIN__
# define HAVE_SETENV
# define FOPEN_WB "wb"
/* #elif defined other platforms ... */
#endif

#if defined PATH_MAX
# define LT_PATHMAX PATH_MAX
#elif defined MAXPATHLEN
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
#endif

#ifndef S_IXOTH
# define S_IXOTH 0
#endif
#ifndef S_IXGRP
# define S_IXGRP 0
#endif

/* path handling portability macros */
#ifndef DIR_SEPARATOR
# define DIR_SEPARATOR '/'
# define PATH_SEPARATOR ':'
#endif

#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
  defined __OS2__
# define HAVE_DOS_BASED_FILE_SYSTEM
# define FOPEN_WB "wb"
# ifndef DIR_SEPARATOR_2
#  define DIR_SEPARATOR_2 '\\'
# endif
# ifndef PATH_SEPARATOR_2
#  define PATH_SEPARATOR_2 ';'
# endif
#endif

#ifndef DIR_SEPARATOR_2
# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
#else /* DIR_SEPARATOR_2 */
# define IS_DIR_SEPARATOR(ch) \
        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
#endif /* DIR_SEPARATOR_2 */

#ifndef PATH_SEPARATOR_2
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
#else /* PATH_SEPARATOR_2 */
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
#endif /* PATH_SEPARATOR_2 */

#ifndef FOPEN_WB
# define FOPEN_WB "w"
#endif
#ifndef _O_BINARY
# define _O_BINARY 0
#endif

#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
  if (stale) { free (stale); stale = 0; } \
} while (0)

#if defined LT_DEBUGWRAPPER
static int lt_debug = 1;
#else
static int lt_debug = 0;
#endif

const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */

void *xmalloc (size_t num);
char *xstrdup (const char *string);
const char *base_name (const char *name);
char *find_executable (const char *wrapper);
char *chase_symlinks (const char *pathspec);
int make_executable (const char *path);
int check_executable (const char *path);
char *strendzap (char *str, const char *pat);
void lt_debugprintf (const char *file, int line, const char *fmt, ...);
void lt_fatal (const char *file, int line, const char *message, ...);
static const char *nonnull (const char *s);
static const char *nonempty (const char *s);
void lt_setenv (const char *name, const char *value);
char *lt_extend_str (const char *orig_value, const char *add, int to_end);
void lt_update_exe_path (const char *name, const char *value);
void lt_update_lib_path (const char *name, const char *value);
char **prepare_spawn (char **argv);
void lt_dump_script (FILE *f);
EOF

            cat <<EOF
#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
# define externally_visible volatile
#else
# define externally_visible __attribute__((externally_visible)) volatile
#endif
externally_visible const char * MAGIC_EXE = "$magic_exe";
const char * LIB_PATH_VARNAME = "$shlibpath_var";
EOF

            if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
              func_to_host_path "$temp_rpath"
              cat <<EOF
const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
EOF
            else
              cat <<"EOF"
const char * LIB_PATH_VALUE   = "";
EOF
            fi

            if test -n "$dllsearchpath"; then
              func_to_host_path "$dllsearchpath:"
              cat <<EOF
const char * EXE_PATH_VARNAME = "PATH";
const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
EOF
            else
              cat <<"EOF"
const char * EXE_PATH_VARNAME = "";
const char * EXE_PATH_VALUE   = "";
EOF
            fi

            if test yes = "$fast_install"; then
              cat <<EOF
const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
EOF
            else
              cat <<EOF
const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
EOF
            fi


            cat <<"EOF"

#define LTWRAPPER_OPTION_PREFIX         "--lt-"

static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";

int
main (int argc, char *argv[])
{
  char **newargz;
  int  newargc;
  char *tmp_pathspec;
  char *actual_cwrapper_path;
  char *actual_cwrapper_name;
  char *target_name;
  char *lt_argv_zero;
  int rval = 127;

  int i;

  program_name = (char *) xstrdup (base_name (argv[0]));
  newargz = XMALLOC (char *, (size_t) argc + 1);

  /* very simple arg parsing; don't want to rely on getopt
   * also, copy all non cwrapper options to newargz, except
   * argz[0], which is handled differently
   */
  newargc=0;
  for (i = 1; i < argc; i++)
    {
      if (STREQ (argv[i], dumpscript_opt))
        {
EOF
            case $host in
              *mingw* | *cygwin* )
                # make stdout use "unix" line endings
                echo "          setmode(1,_O_BINARY);"
                ;;
              esac

            cat <<"EOF"
          lt_dump_script (stdout);
          return 0;
        }
      if (STREQ (argv[i], debug_opt))
        {
          lt_debug = 1;
          continue;
        }
      if (STREQ (argv[i], ltwrapper_option_prefix))
        {
          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
             namespace, but it is not one of the ones we know about and
             have already dealt with, above (inluding dump-script), then
             report an error. Otherwise, targets might begin to believe
             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
             namespace. The first time any user complains about this, we'll
             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
             or a configure.ac-settable value.
           */
          lt_fatal (__FILE__, __LINE__,
                    "unrecognized %s option: '%s'",
                    ltwrapper_option_prefix, argv[i]);
        }
      /* otherwise ... */
      newargz[++newargc] = xstrdup (argv[i]);
    }
  newargz[++newargc] = NULL;

EOF
            cat <<EOF
  /* The GNU banner must be the first non-error debug message */
  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
EOF
            cat <<"EOF"
  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);

  tmp_pathspec = find_executable (argv[0]);
  if (tmp_pathspec == NULL)
    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
  lt_debugprintf (__FILE__, __LINE__,
                  "(main) found exe (before symlink chase) at: %s\n",
                  tmp_pathspec);

  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
  lt_debugprintf (__FILE__, __LINE__,
                  "(main) found exe (after symlink chase) at: %s\n",
                  actual_cwrapper_path);
  XFREE (tmp_pathspec);

  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
  strendzap (actual_cwrapper_path, actual_cwrapper_name);

  /* wrapper name transforms */
  strendzap (actual_cwrapper_name, ".exe");
  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
  XFREE (actual_cwrapper_name);
  actual_cwrapper_name = tmp_pathspec;
  tmp_pathspec = 0;

  /* target_name transforms -- use actual target program name; might have lt- prefix */
  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
  strendzap (target_name, ".exe");
  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
  XFREE (target_name);
  target_name = tmp_pathspec;
  tmp_pathspec = 0;

  lt_debugprintf (__FILE__, __LINE__,
                  "(main) libtool target name: %s\n",
                  target_name);
EOF

            cat <<EOF
  newargz[0] =
    XMALLOC (char, (strlen (actual_cwrapper_path) +
                    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
  strcpy (newargz[0], actual_cwrapper_path);
  strcat (newargz[0], "$objdir");
  strcat (newargz[0], "/");
EOF

            cat <<"EOF"
  /* stop here, and copy so we don't have to do this twice */
  tmp_pathspec = xstrdup (newargz[0]);

  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
  strcat (newargz[0], actual_cwrapper_name);

  /* DO want the lt- prefix here if it exists, so use target_name */
  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
  XFREE (tmp_pathspec);
  tmp_pathspec = NULL;
EOF

            case $host_os in
              mingw*)
            cat <<"EOF"
  {
    char* p;
    while ((p = strchr (newargz[0], '\\')) != NULL)
      {
        *p = '/';
      }
    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
      {
        *p = '/';
      }
  }
EOF
            ;;
            esac

            cat <<"EOF"
  XFREE (target_name);
  XFREE (actual_cwrapper_path);
  XFREE (actual_cwrapper_name);

  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
     because on Windows, both *_VARNAMEs are PATH but uninstalled
     libraries must come first. */
  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);

  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
                  nonnull (lt_argv_zero));
  for (i = 0; i < newargc; i++)
    {
      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
                      i, nonnull (newargz[i]));
    }

EOF

            case $host_os in
              mingw*)
                cat <<"EOF"
  /* execv doesn't actually work on mingw as expected on unix */
  newargz = prepare_spawn (newargz);
  rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
  if (rval == -1)
    {
      /* failed to start process */
      lt_debugprintf (__FILE__, __LINE__,
                      "(main) failed to launch target \"%s\": %s\n",
                      lt_argv_zero, nonnull (strerror (errno)));
      return 127;
    }
  return rval;
EOF
                ;;
              *)
                cat <<"EOF"
  execv (lt_argv_zero, newargz);
  return rval; /* =127, but avoids unused variable warning */
EOF
                ;;
            esac

            cat <<"EOF"
}

void *
xmalloc (size_t num)
{
  void *p = (void *) malloc (num);
  if (!p)
    lt_fatal (__FILE__, __LINE__, "memory exhausted");

  return p;
}

char *
xstrdup (const char *string)
{
  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
                          string) : NULL;
}

const char *
base_name (const char *name)
{
  const char *base;

#if defined HAVE_DOS_BASED_FILE_SYSTEM
  /* Skip over the disk name in MSDOS pathnames. */
  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
    name += 2;
#endif

  for (base = name; *name; name++)
    if (IS_DIR_SEPARATOR (*name))
      base = name + 1;
  return base;
}

int
check_executable (const char *path)
{
  struct stat st;

  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
                  nonempty (path));
  if ((!path) || (!*path))
    return 0;

  if ((stat (path, &st) >= 0)
      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
    return 1;
  else
    return 0;
}

int
make_executable (const char *path)
{
  int rval = 0;
  struct stat st;

  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
                  nonempty (path));
  if ((!path) || (!*path))
    return 0;

  if (stat (path, &st) >= 0)
    {
      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
    }
  return rval;
}

/* Searches for the full path of the wrapper.  Returns
   newly allocated full path name if found, NULL otherwise
   Does not chase symlinks, even on platforms that support them.
*/
char *
find_executable (const char *wrapper)
{
  int has_slash = 0;
  const char *p;
  const char *p_next;
  /* static buffer for getcwd */
  char tmp[LT_PATHMAX + 1];
  size_t tmp_len;
  char *concat_name;

  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
                  nonempty (wrapper));

  if ((wrapper == NULL) || (*wrapper == '\0'))
    return NULL;

  /* Absolute path? */
#if defined HAVE_DOS_BASED_FILE_SYSTEM
  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
    {
      concat_name = xstrdup (wrapper);
      if (check_executable (concat_name))
        return concat_name;
      XFREE (concat_name);
    }
  else
    {
#endif
      if (IS_DIR_SEPARATOR (wrapper[0]))
        {
          concat_name = xstrdup (wrapper);
          if (check_executable (concat_name))
            return concat_name;
          XFREE (concat_name);
        }
#if defined HAVE_DOS_BASED_FILE_SYSTEM
    }
#endif

  for (p = wrapper; *p; p++)
    if (*p == '/')
      {
        has_slash = 1;
        break;
      }
  if (!has_slash)
    {
      /* no slashes; search PATH */
      const char *path = getenv ("PATH");
      if (path != NULL)
        {
          for (p = path; *p; p = p_next)
            {
              const char *q;
              size_t p_len;
              for (q = p; *q; q++)
                if (IS_PATH_SEPARATOR (*q))
                  break;
              p_len = (size_t) (q - p);
              p_next = (*q == '\0' ? q : q + 1);
              if (p_len == 0)
                {
                  /* empty path: current directory */
                  if (getcwd (tmp, LT_PATHMAX) == NULL)
                    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
                              nonnull (strerror (errno)));
                  tmp_len = strlen (tmp);
                  concat_name =
                    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
                  memcpy (concat_name, tmp, tmp_len);
                  concat_name[tmp_len] = '/';
                  strcpy (concat_name + tmp_len + 1, wrapper);
                }
              else
                {
                  concat_name =
                    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
                  memcpy (concat_name, p, p_len);
                  concat_name[p_len] = '/';
                  strcpy (concat_name + p_len + 1, wrapper);
                }
              if (check_executable (concat_name))
                return concat_name;
              XFREE (concat_name);
            }
        }
      /* not found in PATH; assume curdir */
    }
  /* Relative path | not found in path: prepend cwd */
  if (getcwd (tmp, LT_PATHMAX) == NULL)
    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
              nonnull (strerror (errno)));
  tmp_len = strlen (tmp);
  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
  memcpy (concat_name, tmp, tmp_len);
  concat_name[tmp_len] = '/';
  strcpy (concat_name + tmp_len + 1, wrapper);

  if (check_executable (concat_name))
    return concat_name;
  XFREE (concat_name);
  return NULL;
}

char *
chase_symlinks (const char *pathspec)
{
#ifndef S_ISLNK
  return xstrdup (pathspec);
#else
  char buf[LT_PATHMAX];
  struct stat s;
  char *tmp_pathspec = xstrdup (pathspec);
  char *p;
  int has_symlinks = 0;
  while (strlen (tmp_pathspec) && !has_symlinks)
    {
      lt_debugprintf (__FILE__, __LINE__,
                      "checking path component for symlinks: %s\n",
                      tmp_pathspec);
      if (lstat (tmp_pathspec, &s) == 0)
        {
          if (S_ISLNK (s.st_mode) != 0)
            {
              has_symlinks = 1;
              break;
            }

          /* search backwards for last DIR_SEPARATOR */
          p = tmp_pathspec + strlen (tmp_pathspec) - 1;
          while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
            p--;
          if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
            {
              /* no more DIR_SEPARATORS left */
              break;
            }
          *p = '\0';
        }
      else
        {
          lt_fatal (__FILE__, __LINE__,
                    "error accessing file \"%s\": %s",
                    tmp_pathspec, nonnull (strerror (errno)));
        }
    }
  XFREE (tmp_pathspec);

  if (!has_symlinks)
    {
      return xstrdup (pathspec);
    }

  tmp_pathspec = realpath (pathspec, buf);
  if (tmp_pathspec == 0)
    {
      lt_fatal (__FILE__, __LINE__,
                "could not follow symlinks for %s", pathspec);
    }
  return xstrdup (tmp_pathspec);
#endif
}

char *
strendzap (char *str, const char *pat)
{
  size_t len, patlen;

  assert (str != NULL);
  assert (pat != NULL);

  len = strlen (str);
  patlen = strlen (pat);

  if (patlen <= len)
    {
      str += len - patlen;
      if (STREQ (str, pat))
        *str = '\0';
    }
  return str;
}

void
lt_debugprintf (const char *file, int line, const char *fmt, ...)
{
  va_list args;
  if (lt_debug)
    {
      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
      va_start (args, fmt);
      (void) vfprintf (stderr, fmt, args);
      va_end (args);
    }
}

static void
lt_error_core (int exit_status, const char *file,
               int line, const char *mode,
               const char *message, va_list ap)
{
  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
  vfprintf (stderr, message, ap);
  fprintf (stderr, ".\n");

  if (exit_status >= 0)
    exit (exit_status);
}

void
lt_fatal (const char *file, int line, const char *message, ...)
{
  va_list ap;
  va_start (ap, message);
  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
  va_end (ap);
}

static const char *
nonnull (const char *s)
{
  return s ? s : "(null)";
}

static const char *
nonempty (const char *s)
{
  return (s && !*s) ? "(empty)" : nonnull (s);
}

void
lt_setenv (const char *name, const char *value)
{
  lt_debugprintf (__FILE__, __LINE__,
                  "(lt_setenv) setting '%s' to '%s'\n",
                  nonnull (name), nonnull (value));
  {
#ifdef HAVE_SETENV
    /* always make a copy, for consistency with !HAVE_SETENV */
    char *str = xstrdup (value);
    setenv (name, str, 1);
#else
    size_t len = strlen (name) + 1 + strlen (value) + 1;
    char *str = XMALLOC (char, len);
    sprintf (str, "%s=%s", name, value);
    if (putenv (str) != EXIT_SUCCESS)
      {
        XFREE (str);
      }
#endif
  }
}

char *
lt_extend_str (const char *orig_value, const char *add, int to_end)
{
  char *new_value;
  if (orig_value && *orig_value)
    {
      size_t orig_value_len = strlen (orig_value);
      size_t add_len = strlen (add);
      new_value = XMALLOC (char, add_len + orig_value_len + 1);
      if (to_end)
        {
          strcpy (new_value, orig_value);
          strcpy (new_value + orig_value_len, add);
        }
      else
        {
          strcpy (new_value, add);
          strcpy (new_value + add_len, orig_value);
        }
    }
  else
    {
      new_value = xstrdup (add);
    }
  return new_value;
}

void
lt_update_exe_path (const char *name, const char *value)
{
  lt_debugprintf (__FILE__, __LINE__,
                  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
                  nonnull (name), nonnull (value));

  if (name && *name && value && *value)
    {
      char *new_value = lt_extend_str (getenv (name), value, 0);
      /* some systems can't cope with a ':'-terminated path #' */
      size_t len = strlen (new_value);
      while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
        {
          new_value[--len] = '\0';
        }
      lt_setenv (name, new_value);
      XFREE (new_value);
    }
}

void
lt_update_lib_path (const char *name, const char *value)
{
  lt_debugprintf (__FILE__, __LINE__,
                  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
                  nonnull (name), nonnull (value));

  if (name && *name && value && *value)
    {
      char *new_value = lt_extend_str (getenv (name), value, 0);
      lt_setenv (name, new_value);
      XFREE (new_value);
    }
}

EOF
            case $host_os in
              mingw*)
                cat <<"EOF"

/* Prepares an argument vector before calling spawn().
   Note that spawn() does not by itself call the command interpreter
     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
         GetVersionEx(&v);
         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
      }) ? "cmd.exe" : "command.com").
   Instead it simply concatenates the arguments, separated by ' ', and calls
   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
   special way:
   - Space and tab are interpreted as delimiters. They are not treated as
     delimiters if they are surrounded by double quotes: "...".
   - Unescaped double quotes are removed from the input. Their only effect is
     that within double quotes, space and tab are treated like normal
     characters.
   - Backslashes not followed by double quotes are not special.
   - But 2*n+1 backslashes followed by a double quote become
     n backslashes followed by a double quote (n >= 0):
       \" -> "
       \\\" -> \"
       \\\\\" -> \\"
 */
#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
char **
prepare_spawn (char **argv)
{
  size_t argc;
  char **new_argv;
  size_t i;

  /* Count number of arguments.  */
  for (argc = 0; argv[argc] != NULL; argc++)
    ;

  /* Allocate new argument vector.  */
  new_argv = XMALLOC (char *, argc + 1);

  /* Put quoted arguments into the new argument vector.  */
  for (i = 0; i < argc; i++)
    {
      const char *string = argv[i];

      if (string[0] == '\0')
        new_argv[i] = xstrdup ("\"\"");
      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
        {
          int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
          size_t length;
          unsigned int backslashes;
          const char *s;
          char *quoted_string;
          char *p;

          length = 0;
          backslashes = 0;
          if (quote_around)
            length++;
          for (s = string; *s != '\0'; s++)
            {
              char c = *s;
              if (c == '"')
                length += backslashes + 1;
              length++;
              if (c == '\\')
                backslashes++;
              else
                backslashes = 0;
            }
          if (quote_around)
            length += backslashes + 1;

          quoted_string = XMALLOC (char, length + 1);

          p = quoted_string;
          backslashes = 0;
          if (quote_around)
            *p++ = '"';
          for (s = string; *s != '\0'; s++)
            {
              char c = *s;
              if (c == '"')
                {
                  unsigned int j;
                  for (j = backslashes + 1; j > 0; j--)
                    *p++ = '\\';
                }
              *p++ = c;
              if (c == '\\')
                backslashes++;
              else
                backslashes = 0;
            }
          if (quote_around)
            {
              unsigned int j;
              for (j = backslashes; j > 0; j--)
                *p++ = '\\';
              *p++ = '"';
            }
          *p = '\0';

          new_argv[i] = quoted_string;
        }
      else
        new_argv[i] = (char *) string;
    }
  new_argv[argc] = NULL;

  return new_argv;
}
EOF
                ;;
            esac

            cat <<"EOF"
void lt_dump_script (FILE* f)
{
EOF
            func_emit_wrapper yes |
              $SED -n -e '
s/^\(.\{79\}\)\(..*\)/\1\
\2/
h
s/\([\\"]\)/\\\1/g
s/$/\\n/
s/\([^\n]*\).*/  fputs ("\1", f);/p
g
D'
            cat <<"EOF"
}
EOF
}
# end: func_emit_cwrapperexe_src

# func_win32_import_lib_p ARG
# True if ARG is an import lib, as indicated by $file_magic_cmd
func_win32_import_lib_p ()
{
    $debug_cmd

    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
    *import*) : ;;
    *) false ;;
    esac
}

# func_suncc_cstd_abi
# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
# Several compiler flags select an ABI that is incompatible with the
# Cstd library. Avoid specifying it if any are in CXXFLAGS.
func_suncc_cstd_abi ()
{
    $debug_cmd

    case " $compile_command " in
    *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
      suncc_use_cstd_abi=no
      ;;
    *)
      suncc_use_cstd_abi=yes
      ;;
    esac
}

# func_mode_link arg...
func_mode_link ()
{
    $debug_cmd

    case $host in
    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
      # It is impossible to link a dll without this setting, and
      # we shouldn't force the makefile maintainer to figure out
      # what system we are compiling for in order to pass an extra
      # flag for every libtool invocation.
      # allow_undefined=no

      # FIXME: Unfortunately, there are problems with the above when trying
      # to make a dll that has undefined symbols, in which case not
      # even a static library is built.  For now, we need to specify
      # -no-undefined on the libtool link line when we can be certain
      # that all symbols are satisfied, otherwise we get a static library.
      allow_undefined=yes
      ;;
    *)
      allow_undefined=yes
      ;;
    esac
    libtool_args=$nonopt
    base_compile="$nonopt $@"
    compile_command=$nonopt
    finalize_command=$nonopt

    compile_rpath=
    finalize_rpath=
    compile_shlibpath=
    finalize_shlibpath=
    convenience=
    old_convenience=
    deplibs=
    old_deplibs=
    compiler_flags=
    linker_flags=
    dllsearchpath=
    lib_search_path=`pwd`
    inst_prefix_dir=
    new_inherited_linker_flags=

    avoid_version=no
    bindir=
    dlfiles=
    dlprefiles=
    dlself=no
    export_dynamic=no
    export_symbols=
    export_symbols_regex=
    generated=
    libobjs=
    ltlibs=
    module=no
    no_install=no
    objs=
    os2dllname=
    non_pic_objects=
    precious_files_regex=
    prefer_static_libs=no
    preload=false
    prev=
    prevarg=
    release=
    rpath=
    xrpath=
    perm_rpath=
    temp_rpath=
    thread_safe=no
    vinfo=
    vinfo_number=no
    weak_libs=
    single_module=$wl-single_module
    func_infer_tag $base_compile

    # We need to know -static, to get the right output filenames.
    for arg
    do
      case $arg in
      -shared)
        test yes != "$build_libtool_libs" \
          && func_fatal_configuration "cannot build a shared library"
        build_old_libs=no
        break
        ;;
      -all-static | -static | -static-libtool-libs)
        case $arg in
        -all-static)
          if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
            func_warning "complete static linking is impossible in this configuration"
          fi
          if test -n "$link_static_flag"; then
            dlopen_self=$dlopen_self_static
          fi
          prefer_static_libs=yes
          ;;
        -static)
          if test -z "$pic_flag" && test -n "$link_static_flag"; then
            dlopen_self=$dlopen_self_static
          fi
          prefer_static_libs=built
          ;;
        -static-libtool-libs)
          if test -z "$pic_flag" && test -n "$link_static_flag"; then
            dlopen_self=$dlopen_self_static
          fi
          prefer_static_libs=yes
          ;;
        esac
        build_libtool_libs=no
        build_old_libs=yes
        break
        ;;
      esac
    done

    # See if our shared archives depend on static archives.
    test -n "$old_archive_from_new_cmds" && build_old_libs=yes

    # Go through the arguments, transforming them on the way.
    while test "$#" -gt 0; do
      arg=$1
      shift
      func_quote_for_eval "$arg"
      qarg=$func_quote_for_eval_unquoted_result
      func_append libtool_args " $func_quote_for_eval_result"

      # If the previous option needs an argument, assign it.
      if test -n "$prev"; then
        case $prev in
        output)
          func_append compile_command " @OUTPUT@"
          func_append finalize_command " @OUTPUT@"
          ;;
        esac

        case $prev in
        bindir)
          bindir=$arg
          prev=
          continue
          ;;
        dlfiles|dlprefiles)
          $preload || {
            # Add the symbol object into the linking commands.
            func_append compile_command " @SYMFILE@"
            func_append finalize_command " @SYMFILE@"
            preload=:
          }
          case $arg in
          *.la | *.lo) ;;  # We handle these cases below.
          force)
            if test no = "$dlself"; then
              dlself=needless
              export_dynamic=yes
            fi
            prev=
            continue
            ;;
          self)
            if test dlprefiles = "$prev"; then
              dlself=yes
            elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
              dlself=yes
            else
              dlself=needless
              export_dynamic=yes
            fi
            prev=
            continue
            ;;
          *)
            if test dlfiles = "$prev"; then
              func_append dlfiles " $arg"
            else
              func_append dlprefiles " $arg"
            fi
            prev=
            continue
            ;;
          esac
          ;;
        expsyms)
          export_symbols=$arg
          test -f "$arg" \
            || func_fatal_error "symbol file '$arg' does not exist"
          prev=
          continue
          ;;
        expsyms_regex)
          export_symbols_regex=$arg
          prev=
          continue
          ;;
        framework)
          case $host in
            *-*-darwin*)
              case "$deplibs " in
                *" $qarg.ltframework "*) ;;
                *) func_append deplibs " $qarg.ltframework" # this is fixed later
                   ;;
              esac
              ;;
          esac
          prev=
          continue
          ;;
        inst_prefix)
          inst_prefix_dir=$arg
          prev=
          continue
          ;;
        mllvm)
          # Clang does not use LLVM to link, so we can simply discard any
          # '-mllvm $arg' options when doing the link step.
          prev=
          continue
          ;;
        objectlist)
          if test -f "$arg"; then
            save_arg=$arg
            moreargs=
            for fil in `cat "$save_arg"`
            do
#             func_append moreargs " $fil"
              arg=$fil
              # A libtool-controlled object.

              # Check to see that this really is a libtool object.
              if func_lalib_unsafe_p "$arg"; then
                pic_object=
                non_pic_object=

                # Read the .lo file
                func_source "$arg"

                if test -z "$pic_object" ||
                   test -z "$non_pic_object" ||
                   test none = "$pic_object" &&
                   test none = "$non_pic_object"; then
                  func_fatal_error "cannot find name of object for '$arg'"
                fi

                # Extract subdirectory from the argument.
                func_dirname "$arg" "/" ""
                xdir=$func_dirname_result

                if test none != "$pic_object"; then
                  # Prepend the subdirectory the object is found in.
                  pic_object=$xdir$pic_object

                  if test dlfiles = "$prev"; then
                    if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
                      func_append dlfiles " $pic_object"
                      prev=
                      continue
                    else
                      # If libtool objects are unsupported, then we need to preload.
                      prev=dlprefiles
                    fi
                  fi

                  # CHECK ME:  I think I busted this.  -Ossama
                  if test dlprefiles = "$prev"; then
                    # Preload the old-style object.
                    func_append dlprefiles " $pic_object"
                    prev=
                  fi

                  # A PIC object.
                  func_append libobjs " $pic_object"
                  arg=$pic_object
                fi

                # Non-PIC object.
                if test none != "$non_pic_object"; then
                  # Prepend the subdirectory the object is found in.
                  non_pic_object=$xdir$non_pic_object

                  # A standard non-PIC object
                  func_append non_pic_objects " $non_pic_object"
                  if test -z "$pic_object" || test none = "$pic_object"; then
                    arg=$non_pic_object
                  fi
                else
                  # If the PIC object exists, use it instead.
                  # $xdir was prepended to $pic_object above.
                  non_pic_object=$pic_object
                  func_append non_pic_objects " $non_pic_object"
                fi
              else
                # Only an error if not doing a dry-run.
                if $opt_dry_run; then
                  # Extract subdirectory from the argument.
                  func_dirname "$arg" "/" ""
                  xdir=$func_dirname_result

                  func_lo2o "$arg"
                  pic_object=$xdir$objdir/$func_lo2o_result
                  non_pic_object=$xdir$func_lo2o_result
                  func_append libobjs " $pic_object"
                  func_append non_pic_objects " $non_pic_object"
                else
                  func_fatal_error "'$arg' is not a valid libtool object"
                fi
              fi
            done
          else
            func_fatal_error "link input file '$arg' does not exist"
          fi
          arg=$save_arg
          prev=
          continue
          ;;
        os2dllname)
          os2dllname=$arg
          prev=
          continue
          ;;
        precious_regex)
          precious_files_regex=$arg
          prev=
          continue
          ;;
        release)
          release=-$arg
          prev=
          continue
          ;;
        rpath | xrpath)
          # We need an absolute path.
          case $arg in
          [\\/]* | [A-Za-z]:[\\/]*) ;;
          *)
            func_fatal_error "only absolute run-paths are allowed"
            ;;
          esac
          if test rpath = "$prev"; then
            case "$rpath " in
            *" $arg "*) ;;
            *) func_append rpath " $arg" ;;
            esac
          else
            case "$xrpath " in
            *" $arg "*) ;;
            *) func_append xrpath " $arg" ;;
            esac
          fi
          prev=
          continue
          ;;
        shrext)
          shrext_cmds=$arg
          prev=
          continue
          ;;
        weak)
          func_append weak_libs " $arg"
          prev=
          continue
          ;;
        xcclinker)
          func_append linker_flags " $qarg"
          func_append compiler_flags " $qarg"
          prev=
          func_append compile_command " $qarg"
          func_append finalize_command " $qarg"
          continue
          ;;
        xcompiler)
          func_append compiler_flags " $qarg"
          prev=
          func_append compile_command " $qarg"
          func_append finalize_command " $qarg"
          continue
          ;;
        xlinker)
          func_append linker_flags " $qarg"
          func_append compiler_flags " $wl$qarg"
          prev=
          func_append compile_command " $wl$qarg"
          func_append finalize_command " $wl$qarg"
          continue
          ;;
        *)
          eval "$prev=\"\$arg\""
          prev=
          continue
          ;;
        esac
      fi # test -n "$prev"

      prevarg=$arg

      case $arg in
      -all-static)
        if test -n "$link_static_flag"; then
          # See comment for -static flag below, for more details.
          func_append compile_command " $link_static_flag"
          func_append finalize_command " $link_static_flag"
        fi
        continue
        ;;

      -allow-undefined)
        # FIXME: remove this flag sometime in the future.
        func_fatal_error "'-allow-undefined' must not be used because it is the default"
        ;;

      -avoid-version)
        avoid_version=yes
        continue
        ;;

      -bindir)
        prev=bindir
        continue
        ;;

      -dlopen)
        prev=dlfiles
        continue
        ;;

      -dlpreopen)
        prev=dlprefiles
        continue
        ;;

      -export-dynamic)
        export_dynamic=yes
        continue
        ;;

      -export-symbols | -export-symbols-regex)
        if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
          func_fatal_error "more than one -exported-symbols argument is not allowed"
        fi
        if test X-export-symbols = "X$arg"; then
          prev=expsyms
        else
          prev=expsyms_regex
        fi
        continue
        ;;

      -framework)
        prev=framework
        continue
        ;;

      -inst-prefix-dir)
        prev=inst_prefix
        continue
        ;;

      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
      # so, if we see these flags be careful not to treat them like -L
      -L[A-Z][A-Z]*:*)
        case $with_gcc/$host in
        no/*-*-irix* | /*-*-irix*)
          func_append compile_command " $arg"
          func_append finalize_command " $arg"
          ;;
        esac
        continue
        ;;

      -L*)
        func_stripname "-L" '' "$arg"
        if test -z "$func_stripname_result"; then
          if test "$#" -gt 0; then
            func_fatal_error "require no space between '-L' and '$1'"
          else
            func_fatal_error "need path for '-L' option"
          fi
        fi
        func_resolve_sysroot "$func_stripname_result"
        dir=$func_resolve_sysroot_result
        # We need an absolute path.
        case $dir in
        [\\/]* | [A-Za-z]:[\\/]*) ;;
        *)
          absdir=`cd "$dir" && pwd`
          test -z "$absdir" && \
            func_fatal_error "cannot determine absolute directory name of '$dir'"
          dir=$absdir
          ;;
        esac
        case "$deplibs " in
        *" -L$dir "* | *" $arg "*)
          # Will only happen for absolute or sysroot arguments
          ;;
        *)
          # Preserve sysroot, but never include relative directories
          case $dir in
            [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
            *) func_append deplibs " -L$dir" ;;
          esac
          func_append lib_search_path " $dir"
          ;;
        esac
        case $host in
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
          testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
          case :$dllsearchpath: in
          *":$dir:"*) ;;
          ::) dllsearchpath=$dir;;
          *) func_append dllsearchpath ":$dir";;
          esac
          case :$dllsearchpath: in
          *":$testbindir:"*) ;;
          ::) dllsearchpath=$testbindir;;
          *) func_append dllsearchpath ":$testbindir";;
          esac
          ;;
        esac
        continue
        ;;

      -l*)
        if test X-lc = "X$arg" || test X-lm = "X$arg"; then
          case $host in
          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
            # These systems don't actually have a C or math library (as such)
            continue
            ;;
          *-*-os2*)
            # These systems don't actually have a C library (as such)
            test X-lc = "X$arg" && continue
            ;;
          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
            # Do not include libc due to us having libc/libc_r.
            test X-lc = "X$arg" && continue
            ;;
          *-*-rhapsody* | *-*-darwin1.[012])
            # Rhapsody C and math libraries are in the System framework
            func_append deplibs " System.ltframework"
            continue
            ;;
          *-*-sco3.2v5* | *-*-sco5v6*)
            # Causes problems with __ctype
            test X-lc = "X$arg" && continue
            ;;
          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
            # Compiler inserts libc in the correct place for threads to work
            test X-lc = "X$arg" && continue
            ;;
          esac
        elif test X-lc_r = "X$arg"; then
         case $host in
         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
           # Do not include libc_r directly, use -pthread flag.
           continue
           ;;
         esac
        fi
        func_append deplibs " $arg"
        continue
        ;;

      -mllvm)
        prev=mllvm
        continue
        ;;

      -module)
        module=yes
        continue
        ;;

      # Tru64 UNIX uses -model [arg] to determine the layout of C++
      # classes, name mangling, and exception handling.
      # Darwin uses the -arch flag to determine output architecture.
      -model|-arch|-isysroot|--sysroot)
        func_append compiler_flags " $arg"
        func_append compile_command " $arg"
        func_append finalize_command " $arg"
        prev=xcompiler
        continue
        ;;

      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
        func_append compiler_flags " $arg"
        func_append compile_command " $arg"
        func_append finalize_command " $arg"
        case "$new_inherited_linker_flags " in
            *" $arg "*) ;;
            * ) func_append new_inherited_linker_flags " $arg" ;;
        esac
        continue
        ;;

      -multi_module)
        single_module=$wl-multi_module
        continue
        ;;

      -no-fast-install)
        fast_install=no
        continue
        ;;

      -no-install)
        case $host in
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
          # The PATH hackery in wrapper scripts is required on Windows
          # and Darwin in order for the loader to find any dlls it needs.
          func_warning "'-no-install' is ignored for $host"
          func_warning "assuming '-no-fast-install' instead"
          fast_install=no
          ;;
        *) no_install=yes ;;
        esac
        continue
        ;;

      -no-undefined)
        allow_undefined=no
        continue
        ;;

      -objectlist)
        prev=objectlist
        continue
        ;;

      -os2dllname)
        prev=os2dllname
        continue
        ;;

      -o) prev=output ;;

      -precious-files-regex)
        prev=precious_regex
        continue
        ;;

      -release)
        prev=release
        continue
        ;;

      -rpath)
        prev=rpath
        continue
        ;;

      -R)
        prev=xrpath
        continue
        ;;

      -R*)
        func_stripname '-R' '' "$arg"
        dir=$func_stripname_result
        # We need an absolute path.
        case $dir in
        [\\/]* | [A-Za-z]:[\\/]*) ;;
        =*)
          func_stripname '=' '' "$dir"
          dir=$lt_sysroot$func_stripname_result
          ;;
        *)
          func_fatal_error "only absolute run-paths are allowed"
          ;;
        esac
        case "$xrpath " in
        *" $dir "*) ;;
        *) func_append xrpath " $dir" ;;
        esac
        continue
        ;;

      -shared)
        # The effects of -shared are defined in a previous loop.
        continue
        ;;

      -shrext)
        prev=shrext
        continue
        ;;

      -static | -static-libtool-libs)
        # The effects of -static are defined in a previous loop.
        # We used to do the same as -all-static on platforms that
        # didn't have a PIC flag, but the assumption that the effects
        # would be equivalent was wrong.  It would break on at least
        # Digital Unix and AIX.
        continue
        ;;

      -thread-safe)
        thread_safe=yes
        continue
        ;;

      -version-info)
        prev=vinfo
        continue
        ;;

      -version-number)
        prev=vinfo
        vinfo_number=yes
        continue
        ;;

      -weak)
        prev=weak
        continue
        ;;

      -Wc,*)
        func_stripname '-Wc,' '' "$arg"
        args=$func_stripname_result
        arg=
        save_ifs=$IFS; IFS=,
        for flag in $args; do
          IFS=$save_ifs
          func_quote_for_eval "$flag"
          func_append arg " $func_quote_for_eval_result"
          func_append compiler_flags " $func_quote_for_eval_result"
        done
        IFS=$save_ifs
        func_stripname ' ' '' "$arg"
        arg=$func_stripname_result
        ;;

      -Wl,*)
        func_stripname '-Wl,' '' "$arg"
        args=$func_stripname_result
        arg=
        save_ifs=$IFS; IFS=,
        for flag in $args; do
          IFS=$save_ifs
          func_quote_for_eval "$flag"
          func_append arg " $wl$func_quote_for_eval_result"
          func_append compiler_flags " $wl$func_quote_for_eval_result"
          func_append linker_flags " $func_quote_for_eval_result"
        done
        IFS=$save_ifs
        func_stripname ' ' '' "$arg"
        arg=$func_stripname_result
        ;;

      -Xcompiler)
        prev=xcompiler
        continue
        ;;

      -Xlinker)
        prev=xlinker
        continue
        ;;

      -XCClinker)
        prev=xcclinker
        continue
        ;;

      # -msg_* for osf cc
      -msg_*)
        func_quote_for_eval "$arg"
        arg=$func_quote_for_eval_result
        ;;

      # Flags to be passed through unchanged, with rationale:
      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
      # -r[0-9][0-9]*        specify processor for the SGI compiler
      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
      # +DA*, +DD*           enable 64-bit mode for the HP compiler
      # -q*                  compiler args for the IBM compiler
      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
      # -F/path              path to uninstalled frameworks, gcc on darwin
      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
      # -fstack-protector*   stack protector flags for GCC
      # @file                GCC response files
      # -tp=*                Portland pgcc target processor selection
      # --sysroot=*          for sysroot support
      # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
      # -stdlib=*            select c++ std lib with clang
      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
      -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
        func_quote_for_eval "$arg"
        arg=$func_quote_for_eval_result
        func_append compile_command " $arg"
        func_append finalize_command " $arg"
        func_append compiler_flags " $arg"
        continue
        ;;

      -Z*)
        if test os2 = "`expr $host : '.*\(os2\)'`"; then
          # OS/2 uses -Zxxx to specify OS/2-specific options
          compiler_flags="$compiler_flags $arg"
          func_append compile_command " $arg"
          func_append finalize_command " $arg"
          case $arg in
          -Zlinker | -Zstack)
            prev=xcompiler
            ;;
          esac
          continue
        else
          # Otherwise treat like 'Some other compiler flag' below
          func_quote_for_eval "$arg"
          arg=$func_quote_for_eval_result
        fi
        ;;

      # Some other compiler flag.
      -* | +*)
        func_quote_for_eval "$arg"
        arg=$func_quote_for_eval_result
        ;;

      *.$objext)
        # A standard object.
        func_append objs " $arg"
        ;;

      *.lo)
        # A libtool-controlled object.

        # Check to see that this really is a libtool object.
        if func_lalib_unsafe_p "$arg"; then
          pic_object=
          non_pic_object=

          # Read the .lo file
          func_source "$arg"

          if test -z "$pic_object" ||
             test -z "$non_pic_object" ||
             test none = "$pic_object" &&
             test none = "$non_pic_object"; then
            func_fatal_error "cannot find name of object for '$arg'"
          fi

          # Extract subdirectory from the argument.
          func_dirname "$arg" "/" ""
          xdir=$func_dirname_result

          test none = "$pic_object" || {
            # Prepend the subdirectory the object is found in.
            pic_object=$xdir$pic_object

            if test dlfiles = "$prev"; then
              if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
                func_append dlfiles " $pic_object"
                prev=
                continue
              else
                # If libtool objects are unsupported, then we need to preload.
                prev=dlprefiles
              fi
            fi

            # CHECK ME:  I think I busted this.  -Ossama
            if test dlprefiles = "$prev"; then
              # Preload the old-style object.
              func_append dlprefiles " $pic_object"
              prev=
            fi

            # A PIC object.
            func_append libobjs " $pic_object"
            arg=$pic_object
          }

          # Non-PIC object.
          if test none != "$non_pic_object"; then
            # Prepend the subdirectory the object is found in.
            non_pic_object=$xdir$non_pic_object

            # A standard non-PIC object
            func_append non_pic_objects " $non_pic_object"
            if test -z "$pic_object" || test none = "$pic_object"; then
              arg=$non_pic_object
            fi
          else
            # If the PIC object exists, use it instead.
            # $xdir was prepended to $pic_object above.
            non_pic_object=$pic_object
            func_append non_pic_objects " $non_pic_object"
          fi
        else
          # Only an error if not doing a dry-run.
          if $opt_dry_run; then
            # Extract subdirectory from the argument.
            func_dirname "$arg" "/" ""
            xdir=$func_dirname_result

            func_lo2o "$arg"
            pic_object=$xdir$objdir/$func_lo2o_result
            non_pic_object=$xdir$func_lo2o_result
            func_append libobjs " $pic_object"
            func_append non_pic_objects " $non_pic_object"
          else
            func_fatal_error "'$arg' is not a valid libtool object"
          fi
        fi
        ;;

      *.$libext)
        # An archive.
        func_append deplibs " $arg"
        func_append old_deplibs " $arg"
        continue
        ;;

      *.la)
        # A libtool-controlled library.

        func_resolve_sysroot "$arg"
        if test dlfiles = "$prev"; then
          # This library was specified with -dlopen.
          func_append dlfiles " $func_resolve_sysroot_result"
          prev=
        elif test dlprefiles = "$prev"; then
          # The library was specified with -dlpreopen.
          func_append dlprefiles " $func_resolve_sysroot_result"
          prev=
        else
          func_append deplibs " $func_resolve_sysroot_result"
        fi
        continue
        ;;

      # Some other compiler argument.
      *)
        # Unknown arguments in both finalize_command and compile_command need
        # to be aesthetically quoted because they are evaled later.
        func_quote_for_eval "$arg"
        arg=$func_quote_for_eval_result
        ;;
      esac # arg

      # Now actually substitute the argument into the commands.
      if test -n "$arg"; then
        func_append compile_command " $arg"
        func_append finalize_command " $arg"
      fi
    done # argument parsing loop

    test -n "$prev" && \
      func_fatal_help "the '$prevarg' option requires an argument"

    if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
      eval arg=\"$export_dynamic_flag_spec\"
      func_append compile_command " $arg"
      func_append finalize_command " $arg"
    fi

    oldlibs=
    # calculate the name of the file, without its directory
    func_basename "$output"
    outputname=$func_basename_result
    libobjs_save=$libobjs

    if test -n "$shlibpath_var"; then
      # get the directories listed in $shlibpath_var
      eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
    else
      shlib_search_path=
    fi
    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"

    # Definition is injected by LT_CONFIG during libtool generation.
    func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"

    func_dirname "$output" "/" ""
    output_objdir=$func_dirname_result$objdir
    func_to_tool_file "$output_objdir/"
    tool_output_objdir=$func_to_tool_file_result
    # Create the object directory.
    func_mkdir_p "$output_objdir"

    # Determine the type of output
    case $output in
    "")
      func_fatal_help "you must specify an output file"
      ;;
    *.$libext) linkmode=oldlib ;;
    *.lo | *.$objext) linkmode=obj ;;
    *.la) linkmode=lib ;;
    *) linkmode=prog ;; # Anything else should be a program.
    esac

    specialdeplibs=

    libs=
    # Find all interdependent deplibs by searching for libraries
    # that are linked more than once (e.g. -la -lb -la)
    for deplib in $deplibs; do
      if $opt_preserve_dup_deps; then
        case "$libs " in
        *" $deplib "*) func_append specialdeplibs " $deplib" ;;
        esac
      fi
      func_append libs " $deplib"
    done

    if test lib = "$linkmode"; then
      libs="$predeps $libs $compiler_lib_search_path $postdeps"

      # Compute libraries that are listed more than once in $predeps
      # $postdeps and mark them as special (i.e., whose duplicates are
      # not to be eliminated).
      pre_post_deps=
      if $opt_duplicate_compiler_generated_deps; then
        for pre_post_dep in $predeps $postdeps; do
          case "$pre_post_deps " in
          *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
          esac
          func_append pre_post_deps " $pre_post_dep"
        done
      fi
      pre_post_deps=
    fi

    deplibs=
    newdependency_libs=
    newlib_search_path=
    need_relink=no # whether we're linking any uninstalled libtool libraries
    notinst_deplibs= # not-installed libtool libraries
    notinst_path= # paths that contain not-installed libtool libraries

    case $linkmode in
    lib)
        passes="conv dlpreopen link"
        for file in $dlfiles $dlprefiles; do
          case $file in
          *.la) ;;
          *)
            func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
            ;;
          esac
        done
        ;;
    prog)
        compile_deplibs=
        finalize_deplibs=
        alldeplibs=false
        newdlfiles=
        newdlprefiles=
        passes="conv scan dlopen dlpreopen link"
        ;;
    *)  passes="conv"
        ;;
    esac

    for pass in $passes; do
      # The preopen pass in lib mode reverses $deplibs; put it back here
      # so that -L comes before libs that need it for instance...
      if test lib,link = "$linkmode,$pass"; then
        ## FIXME: Find the place where the list is rebuilt in the wrong
        ##        order, and fix it there properly
        tmp_deplibs=
        for deplib in $deplibs; do
          tmp_deplibs="$deplib $tmp_deplibs"
        done
        deplibs=$tmp_deplibs
      fi

      if test lib,link = "$linkmode,$pass" ||
         test prog,scan = "$linkmode,$pass"; then
        libs=$deplibs
        deplibs=
      fi
      if test prog = "$linkmode"; then
        case $pass in
        dlopen) libs=$dlfiles ;;
        dlpreopen) libs=$dlprefiles ;;
        link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
        esac
      fi
      if test lib,dlpreopen = "$linkmode,$pass"; then
        # Collect and forward deplibs of preopened libtool libs
        for lib in $dlprefiles; do
          # Ignore non-libtool-libs
          dependency_libs=
          func_resolve_sysroot "$lib"
          case $lib in
          *.la) func_source "$func_resolve_sysroot_result" ;;
          esac

          # Collect preopened libtool deplibs, except any this library
          # has declared as weak libs
          for deplib in $dependency_libs; do
            func_basename "$deplib"
            deplib_base=$func_basename_result
            case " $weak_libs " in
            *" $deplib_base "*) ;;
            *) func_append deplibs " $deplib" ;;
            esac
          done
        done
        libs=$dlprefiles
      fi
      if test dlopen = "$pass"; then
        # Collect dlpreopened libraries
        save_deplibs=$deplibs
        deplibs=
      fi

      for deplib in $libs; do
        lib=
        found=false
        case $deplib in
        -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
          if test prog,link = "$linkmode,$pass"; then
            compile_deplibs="$deplib $compile_deplibs"
            finalize_deplibs="$deplib $finalize_deplibs"
          else
            func_append compiler_flags " $deplib"
            if test lib = "$linkmode"; then
                case "$new_inherited_linker_flags " in
                    *" $deplib "*) ;;
                    * ) func_append new_inherited_linker_flags " $deplib" ;;
                esac
            fi
          fi
          continue
          ;;
        -l*)
          if test lib != "$linkmode" && test prog != "$linkmode"; then
            func_warning "'-l' is ignored for archives/objects"
            continue
          fi
          func_stripname '-l' '' "$deplib"
          name=$func_stripname_result
          if test lib = "$linkmode"; then
            searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
          else
            searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
          fi
          for searchdir in $searchdirs; do
            for search_ext in .la $std_shrext .so .a; do
              # Search the libtool library
              lib=$searchdir/lib$name$search_ext
              if test -f "$lib"; then
                if test .la = "$search_ext"; then
                  found=:
                else
                  found=false
                fi
                break 2
              fi
            done
          done
          if $found; then
            # deplib is a libtool library
            # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
            # We need to do some special things here, and not later.
            if test yes = "$allow_libtool_libs_with_static_runtimes"; then
              case " $predeps $postdeps " in
              *" $deplib "*)
                if func_lalib_p "$lib"; then
                  library_names=
                  old_library=
                  func_source "$lib"
                  for l in $old_library $library_names; do
                    ll=$l
                  done
                  if test "X$ll" = "X$old_library"; then # only static version available
                    found=false
                    func_dirname "$lib" "" "."
                    ladir=$func_dirname_result
                    lib=$ladir/$old_library
                    if test prog,link = "$linkmode,$pass"; then
                      compile_deplibs="$deplib $compile_deplibs"
                      finalize_deplibs="$deplib $finalize_deplibs"
                    else
                      deplibs="$deplib $deplibs"
                      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
                    fi
                    continue
                  fi
                fi
                ;;
              *) ;;
              esac
            fi
          else
            # deplib doesn't seem to be a libtool library
            if test prog,link = "$linkmode,$pass"; then
              compile_deplibs="$deplib $compile_deplibs"
              finalize_deplibs="$deplib $finalize_deplibs"
            else
              deplibs="$deplib $deplibs"
              test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
            fi
            continue
          fi
          ;; # -l
        *.ltframework)
          if test prog,link = "$linkmode,$pass"; then
            compile_deplibs="$deplib $compile_deplibs"
            finalize_deplibs="$deplib $finalize_deplibs"
          else
            deplibs="$deplib $deplibs"
            if test lib = "$linkmode"; then
                case "$new_inherited_linker_flags " in
                    *" $deplib "*) ;;
                    * ) func_append new_inherited_linker_flags " $deplib" ;;
                esac
            fi
          fi
          continue
          ;;
        -L*)
          case $linkmode in
          lib)
            deplibs="$deplib $deplibs"
            test conv = "$pass" && continue
            newdependency_libs="$deplib $newdependency_libs"
            func_stripname '-L' '' "$deplib"
            func_resolve_sysroot "$func_stripname_result"
            func_append newlib_search_path " $func_resolve_sysroot_result"
            ;;
          prog)
            if test conv = "$pass"; then
              deplibs="$deplib $deplibs"
              continue
            fi
            if test scan = "$pass"; then
              deplibs="$deplib $deplibs"
            else
              compile_deplibs="$deplib $compile_deplibs"
              finalize_deplibs="$deplib $finalize_deplibs"
            fi
            func_stripname '-L' '' "$deplib"
            func_resolve_sysroot "$func_stripname_result"
            func_append newlib_search_path " $func_resolve_sysroot_result"
            ;;
          *)
            func_warning "'-L' is ignored for archives/objects"
            ;;
          esac # linkmode
          continue
          ;; # -L
        -R*)
          if test link = "$pass"; then
            func_stripname '-R' '' "$deplib"
            func_resolve_sysroot "$func_stripname_result"
            dir=$func_resolve_sysroot_result
            # Make sure the xrpath contains only unique directories.
            case "$xrpath " in
            *" $dir "*) ;;
            *) func_append xrpath " $dir" ;;
            esac
          fi
          deplibs="$deplib $deplibs"
          continue
          ;;
        *.la)
          func_resolve_sysroot "$deplib"
          lib=$func_resolve_sysroot_result
          ;;
        *.$libext)
          if test conv = "$pass"; then
            deplibs="$deplib $deplibs"
            continue
          fi
          case $linkmode in
          lib)
            # Linking convenience modules into shared libraries is allowed,
            # but linking other static libraries is non-portable.
            case " $dlpreconveniencelibs " in
            *" $deplib "*) ;;
            *)
              valid_a_lib=false
              case $deplibs_check_method in
                match_pattern*)
                  set dummy $deplibs_check_method; shift
                  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
                  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
                    | $EGREP "$match_pattern_regex" > /dev/null; then
                    valid_a_lib=:
                  fi
                ;;
                pass_all)
                  valid_a_lib=:
                ;;
              esac
              if $valid_a_lib; then
                echo
                $ECHO "*** Warning: Linking the shared library $output against the"
                $ECHO "*** static library $deplib is not portable!"
                deplibs="$deplib $deplibs"
              else
                echo
                $ECHO "*** Warning: Trying to link with static lib archive $deplib."
                echo "*** I have the capability to make that library automatically link in when"
                echo "*** you link to this library.  But I can only do this if you have a"
                echo "*** shared version of the library, which you do not appear to have"
                echo "*** because the file extensions .$libext of this argument makes me believe"
                echo "*** that it is just a static archive that I should not use here."
              fi
              ;;
            esac
            continue
            ;;
          prog)
            if test link != "$pass"; then
              deplibs="$deplib $deplibs"
            else
              compile_deplibs="$deplib $compile_deplibs"
              finalize_deplibs="$deplib $finalize_deplibs"
            fi
            continue
            ;;
          esac # linkmode
          ;; # *.$libext
        *.lo | *.$objext)
          if test conv = "$pass"; then
            deplibs="$deplib $deplibs"
          elif test prog = "$linkmode"; then
            if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
              # If there is no dlopen support or we're linking statically,
              # we need to preload.
              func_append newdlprefiles " $deplib"
              compile_deplibs="$deplib $compile_deplibs"
              finalize_deplibs="$deplib $finalize_deplibs"
            else
              func_append newdlfiles " $deplib"
            fi
          fi
          continue
          ;;
        %DEPLIBS%)
          alldeplibs=:
          continue
          ;;
        esac # case $deplib

        $found || test -f "$lib" \
          || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"

        # Check to see that this really is a libtool archive.
        func_lalib_unsafe_p "$lib" \
          || func_fatal_error "'$lib' is not a valid libtool archive"

        func_dirname "$lib" "" "."
        ladir=$func_dirname_result

        dlname=
        dlopen=
        dlpreopen=
        libdir=
        library_names=
        old_library=
        inherited_linker_flags=
        # If the library was installed with an old release of libtool,
        # it will not redefine variables installed, or shouldnotlink
        installed=yes
        shouldnotlink=no
        avoidtemprpath=


        # Read the .la file
        func_source "$lib"

        # Convert "-framework foo" to "foo.ltframework"
        if test -n "$inherited_linker_flags"; then
          tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
          for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
            case " $new_inherited_linker_flags " in
              *" $tmp_inherited_linker_flag "*) ;;
              *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
            esac
          done
        fi
        dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
        if test lib,link = "$linkmode,$pass" ||
           test prog,scan = "$linkmode,$pass" ||
           { test prog != "$linkmode" && test lib != "$linkmode"; }; then
          test -n "$dlopen" && func_append dlfiles " $dlopen"
          test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
        fi

        if test conv = "$pass"; then
          # Only check for convenience libraries
          deplibs="$lib $deplibs"
          if test -z "$libdir"; then
            if test -z "$old_library"; then
              func_fatal_error "cannot find name of link library for '$lib'"
            fi
            # It is a libtool convenience library, so add in its objects.
            func_append convenience " $ladir/$objdir/$old_library"
            func_append old_convenience " $ladir/$objdir/$old_library"
          elif test prog != "$linkmode" && test lib != "$linkmode"; then
            func_fatal_error "'$lib' is not a convenience library"
          fi
          tmp_libs=
          for deplib in $dependency_libs; do
            deplibs="$deplib $deplibs"
            if $opt_preserve_dup_deps; then
              case "$tmp_libs " in
              *" $deplib "*) func_append specialdeplibs " $deplib" ;;
              esac
            fi
            func_append tmp_libs " $deplib"
          done
          continue
        fi # $pass = conv


        # Get the name of the library we link against.
        linklib=
        if test -n "$old_library" &&
           { test yes = "$prefer_static_libs" ||
             test built,no = "$prefer_static_libs,$installed"; }; then
          linklib=$old_library
        else
          for l in $old_library $library_names; do
            linklib=$l
          done
        fi
        if test -z "$linklib"; then
          func_fatal_error "cannot find name of link library for '$lib'"
        fi

        # This library was specified with -dlopen.
        if test dlopen = "$pass"; then
          test -z "$libdir" \
            && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
          if test -z "$dlname" ||
             test yes != "$dlopen_support" ||
             test no = "$build_libtool_libs"
          then
            # If there is no dlname, no dlopen support or we're linking
            # statically, we need to preload.  We also need to preload any
            # dependent libraries so libltdl's deplib preloader doesn't
            # bomb out in the load deplibs phase.
            func_append dlprefiles " $lib $dependency_libs"
          else
            func_append newdlfiles " $lib"
          fi
          continue
        fi # $pass = dlopen

        # We need an absolute path.
        case $ladir in
        [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
        *)
          abs_ladir=`cd "$ladir" && pwd`
          if test -z "$abs_ladir"; then
            func_warning "cannot determine absolute directory name of '$ladir'"
            func_warning "passing it literally to the linker, although it might fail"
            abs_ladir=$ladir
          fi
          ;;
        esac
        func_basename "$lib"
        laname=$func_basename_result

        # Find the relevant object directory and library name.
        if test yes = "$installed"; then
          if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
            func_warning "library '$lib' was moved."
            dir=$ladir
            absdir=$abs_ladir
            libdir=$abs_ladir
          else
            dir=$lt_sysroot$libdir
            absdir=$lt_sysroot$libdir
          fi
          test yes = "$hardcode_automatic" && avoidtemprpath=yes
        else
          if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
            dir=$ladir
            absdir=$abs_ladir
            # Remove this search path later
            func_append notinst_path " $abs_ladir"
          else
            dir=$ladir/$objdir
            absdir=$abs_ladir/$objdir
            # Remove this search path later
            func_append notinst_path " $abs_ladir"
          fi
        fi # $installed = yes
        func_stripname 'lib' '.la' "$laname"
        name=$func_stripname_result

        # This library was specified with -dlpreopen.
        if test dlpreopen = "$pass"; then
          if test -z "$libdir" && test prog = "$linkmode"; then
            func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
          fi
          case $host in
            # special handling for platforms with PE-DLLs.
            *cygwin* | *mingw* | *cegcc* )
              # Linker will automatically link against shared library if both
              # static and shared are present.  Therefore, ensure we extract
              # symbols from the import library if a shared library is present
              # (otherwise, the dlopen module name will be incorrect).  We do
              # this by putting the import library name into $newdlprefiles.
              # We recover the dlopen module name by 'saving' the la file
              # name in a special purpose variable, and (later) extracting the
              # dlname from the la file.
              if test -n "$dlname"; then
                func_tr_sh "$dir/$linklib"
                eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
                func_append newdlprefiles " $dir/$linklib"
              else
                func_append newdlprefiles " $dir/$old_library"
                # Keep a list of preopened convenience libraries to check
                # that they are being used correctly in the link pass.
                test -z "$libdir" && \
                  func_append dlpreconveniencelibs " $dir/$old_library"
              fi
            ;;
            * )
              # Prefer using a static library (so that no silly _DYNAMIC symbols
              # are required to link).
              if test -n "$old_library"; then
                func_append newdlprefiles " $dir/$old_library"
                # Keep a list of preopened convenience libraries to check
                # that they are being used correctly in the link pass.
                test -z "$libdir" && \
                  func_append dlpreconveniencelibs " $dir/$old_library"
              # Otherwise, use the dlname, so that lt_dlopen finds it.
              elif test -n "$dlname"; then
                func_append newdlprefiles " $dir/$dlname"
              else
                func_append newdlprefiles " $dir/$linklib"
              fi
            ;;
          esac
        fi # $pass = dlpreopen

        if test -z "$libdir"; then
          # Link the convenience library
          if test lib = "$linkmode"; then
            deplibs="$dir/$old_library $deplibs"
          elif test prog,link = "$linkmode,$pass"; then
            compile_deplibs="$dir/$old_library $compile_deplibs"
            finalize_deplibs="$dir/$old_library $finalize_deplibs"
          else
            deplibs="$lib $deplibs" # used for prog,scan pass
          fi
          continue
        fi


        if test prog = "$linkmode" && test link != "$pass"; then
          func_append newlib_search_path " $ladir"
          deplibs="$lib $deplibs"

          linkalldeplibs=false
          if test no != "$link_all_deplibs" || test -z "$library_names" ||
             test no = "$build_libtool_libs"; then
            linkalldeplibs=:
          fi

          tmp_libs=
          for deplib in $dependency_libs; do
            case $deplib in
            -L*) func_stripname '-L' '' "$deplib"
                 func_resolve_sysroot "$func_stripname_result"
                 func_append newlib_search_path " $func_resolve_sysroot_result"
                 ;;
            esac
            # Need to link against all dependency_libs?
            if $linkalldeplibs; then
              deplibs="$deplib $deplibs"
            else
              # Need to hardcode shared library paths
              # or/and link against static libraries
              newdependency_libs="$deplib $newdependency_libs"
            fi
            if $opt_preserve_dup_deps; then
              case "$tmp_libs " in
              *" $deplib "*) func_append specialdeplibs " $deplib" ;;
              esac
            fi
            func_append tmp_libs " $deplib"
          done # for deplib
          continue
        fi # $linkmode = prog...

        if test prog,link = "$linkmode,$pass"; then
          if test -n "$library_names" &&
             { { test no = "$prefer_static_libs" ||
                 test built,yes = "$prefer_static_libs,$installed"; } ||
               test -z "$old_library"; }; then
            # We need to hardcode the library path
            if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
              # Make sure the rpath contains only unique directories.
              case $temp_rpath: in
              *"$absdir:"*) ;;
              *) func_append temp_rpath "$absdir:" ;;
              esac
            fi

            # Hardcode the library path.
            # Skip directories that are in the system default run-time
            # search path.
            case " $sys_lib_dlsearch_path " in
            *" $absdir "*) ;;
            *)
              case "$compile_rpath " in
              *" $absdir "*) ;;
              *) func_append compile_rpath " $absdir" ;;
              esac
              ;;
            esac
            case " $sys_lib_dlsearch_path " in
            *" $libdir "*) ;;
            *)
              case "$finalize_rpath " in
              *" $libdir "*) ;;
              *) func_append finalize_rpath " $libdir" ;;
              esac
              ;;
            esac
          fi # $linkmode,$pass = prog,link...

          if $alldeplibs &&
             { test pass_all = "$deplibs_check_method" ||
               { test yes = "$build_libtool_libs" &&
                 test -n "$library_names"; }; }; then
            # We only need to search for static libraries
            continue
          fi
        fi

        link_static=no # Whether the deplib will be linked statically
        use_static_libs=$prefer_static_libs
        if test built = "$use_static_libs" && test yes = "$installed"; then
          use_static_libs=no
        fi
        if test -n "$library_names" &&
           { test no = "$use_static_libs" || test -z "$old_library"; }; then
          case $host in
          *cygwin* | *mingw* | *cegcc* | *os2*)
              # No point in relinking DLLs because paths are not encoded
              func_append notinst_deplibs " $lib"
              need_relink=no
            ;;
          *)
            if test no = "$installed"; then
              func_append notinst_deplibs " $lib"
              need_relink=yes
            fi
            ;;
          esac
          # This is a shared library

          # Warn about portability, can't link against -module's on some
          # systems (darwin).  Don't bleat about dlopened modules though!
          dlopenmodule=
          for dlpremoduletest in $dlprefiles; do
            if test "X$dlpremoduletest" = "X$lib"; then
              dlopenmodule=$dlpremoduletest
              break
            fi
          done
          if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
            echo
            if test prog = "$linkmode"; then
              $ECHO "*** Warning: Linking the executable $output against the loadable module"
            else
              $ECHO "*** Warning: Linking the shared library $output against the loadable module"
            fi
            $ECHO "*** $linklib is not portable!"
          fi
          if test lib = "$linkmode" &&
             test yes = "$hardcode_into_libs"; then
            # Hardcode the library path.
            # Skip directories that are in the system default run-time
            # search path.
            case " $sys_lib_dlsearch_path " in
            *" $absdir "*) ;;
            *)
              case "$compile_rpath " in
              *" $absdir "*) ;;
              *) func_append compile_rpath " $absdir" ;;
              esac
              ;;
            esac
            case " $sys_lib_dlsearch_path " in
            *" $libdir "*) ;;
            *)
              case "$finalize_rpath " in
              *" $libdir "*) ;;
              *) func_append finalize_rpath " $libdir" ;;
              esac
              ;;
            esac
          fi

          if test -n "$old_archive_from_expsyms_cmds"; then
            # figure out the soname
            set dummy $library_names
            shift
            realname=$1
            shift
            libname=`eval "\\$ECHO \"$libname_spec\""`
            # use dlname if we got it. it's perfectly good, no?
            if test -n "$dlname"; then
              soname=$dlname
            elif test -n "$soname_spec"; then
              # bleh windows
              case $host in
              *cygwin* | mingw* | *cegcc* | *os2*)
                func_arith $current - $age
                major=$func_arith_result
                versuffix=-$major
                ;;
              esac
              eval soname=\"$soname_spec\"
            else
              soname=$realname
            fi

            # Make a new name for the extract_expsyms_cmds to use
            soroot=$soname
            func_basename "$soroot"
            soname=$func_basename_result
            func_stripname 'lib' '.dll' "$soname"
            newlib=libimp-$func_stripname_result.a

            # If the library has no export list, then create one now
            if test -f "$output_objdir/$soname-def"; then :
            else
              func_verbose "extracting exported symbol list from '$soname'"
              func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
            fi

            # Create $newlib
            if test -f "$output_objdir/$newlib"; then :; else
              func_verbose "generating import library for '$soname'"
              func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
            fi
            # make sure the library variables are pointing to the new library
            dir=$output_objdir
            linklib=$newlib
          fi # test -n "$old_archive_from_expsyms_cmds"

          if test prog = "$linkmode" || test relink != "$opt_mode"; then
            add_shlibpath=
            add_dir=
            add=
            lib_linked=yes
            case $hardcode_action in
            immediate | unsupported)
              if test no = "$hardcode_direct"; then
                add=$dir/$linklib
                case $host in
                  *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
                  *-*-sysv4*uw2*) add_dir=-L$dir ;;
                  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
                    *-*-unixware7*) add_dir=-L$dir ;;
                  *-*-darwin* )
                    # if the lib is a (non-dlopened) module then we cannot
                    # link against it, someone is ignoring the earlier warnings
                    if /usr/bin/file -L $add 2> /dev/null |
                         $GREP ": [^:]* bundle" >/dev/null; then
                      if test "X$dlopenmodule" != "X$lib"; then
                        $ECHO "*** Warning: lib $linklib is a module, not a shared library"
                        if test -z "$old_library"; then
                          echo
                          echo "*** And there doesn't seem to be a static archive available"
                          echo "*** The link will probably fail, sorry"
                        else
                          add=$dir/$old_library
                        fi
                      elif test -n "$old_library"; then
                        add=$dir/$old_library
                      fi
                    fi
                esac
              elif test no = "$hardcode_minus_L"; then
                case $host in
                *-*-sunos*) add_shlibpath=$dir ;;
                esac
                add_dir=-L$dir
                add=-l$name
              elif test no = "$hardcode_shlibpath_var"; then
                add_shlibpath=$dir
                add=-l$name
              else
                lib_linked=no
              fi
              ;;
            relink)
              if test yes = "$hardcode_direct" &&
                 test no = "$hardcode_direct_absolute"; then
                add=$dir/$linklib
              elif test yes = "$hardcode_minus_L"; then
                add_dir=-L$absdir
                # Try looking first in the location we're being installed to.
                if test -n "$inst_prefix_dir"; then
                  case $libdir in
                    [\\/]*)
                      func_append add_dir " -L$inst_prefix_dir$libdir"
                      ;;
                  esac
                fi
                add=-l$name
              elif test yes = "$hardcode_shlibpath_var"; then
                add_shlibpath=$dir
                add=-l$name
              else
                lib_linked=no
              fi
              ;;
            *) lib_linked=no ;;
            esac

            if test yes != "$lib_linked"; then
              func_fatal_configuration "unsupported hardcode properties"
            fi

            if test -n "$add_shlibpath"; then
              case :$compile_shlibpath: in
              *":$add_shlibpath:"*) ;;
              *) func_append compile_shlibpath "$add_shlibpath:" ;;
              esac
            fi
            if test prog = "$linkmode"; then
              test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
              test -n "$add" && compile_deplibs="$add $compile_deplibs"
            else
              test -n "$add_dir" && deplibs="$add_dir $deplibs"
              test -n "$add" && deplibs="$add $deplibs"
              if test yes != "$hardcode_direct" &&
                 test yes != "$hardcode_minus_L" &&
                 test yes = "$hardcode_shlibpath_var"; then
                case :$finalize_shlibpath: in
                *":$libdir:"*) ;;
                *) func_append finalize_shlibpath "$libdir:" ;;
                esac
              fi
            fi
          fi

          if test prog = "$linkmode" || test relink = "$opt_mode"; then
            add_shlibpath=
            add_dir=
            add=
            # Finalize command for both is simple: just hardcode it.
            if test yes = "$hardcode_direct" &&
               test no = "$hardcode_direct_absolute"; then
              add=$libdir/$linklib
            elif test yes = "$hardcode_minus_L"; then
              add_dir=-L$libdir
              add=-l$name
            elif test yes = "$hardcode_shlibpath_var"; then
              case :$finalize_shlibpath: in
              *":$libdir:"*) ;;
              *) func_append finalize_shlibpath "$libdir:" ;;
              esac
              add=-l$name
            elif test yes = "$hardcode_automatic"; then
              if test -n "$inst_prefix_dir" &&
                 test -f "$inst_prefix_dir$libdir/$linklib"; then
                add=$inst_prefix_dir$libdir/$linklib
              else
                add=$libdir/$linklib
              fi
            else
              # We cannot seem to hardcode it, guess we'll fake it.
              add_dir=-L$libdir
              # Try looking first in the location we're being installed to.
              if test -n "$inst_prefix_dir"; then
                case $libdir in
                  [\\/]*)
                    func_append add_dir " -L$inst_prefix_dir$libdir"
                    ;;
                esac
              fi
              add=-l$name
            fi

            if test prog = "$linkmode"; then
              test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
              test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
            else
              test -n "$add_dir" && deplibs="$add_dir $deplibs"
              test -n "$add" && deplibs="$add $deplibs"
            fi
          fi
        elif test prog = "$linkmode"; then
          # Here we assume that one of hardcode_direct or hardcode_minus_L
          # is not unsupported.  This is valid on all known static and
          # shared platforms.
          if test unsupported != "$hardcode_direct"; then
            test -n "$old_library" && linklib=$old_library
            compile_deplibs="$dir/$linklib $compile_deplibs"
            finalize_deplibs="$dir/$linklib $finalize_deplibs"
          else
            compile_deplibs="-l$name -L$dir $compile_deplibs"
            finalize_deplibs="-l$name -L$dir $finalize_deplibs"
          fi
        elif test yes = "$build_libtool_libs"; then
          # Not a shared library
          if test pass_all != "$deplibs_check_method"; then
            # We're trying link a shared library against a static one
            # but the system doesn't support it.

            # Just print a warning and add the library to dependency_libs so
            # that the program can be linked against the static library.
            echo
            $ECHO "*** Warning: This system cannot link to static lib archive $lib."
            echo "*** I have the capability to make that library automatically link in when"
            echo "*** you link to this library.  But I can only do this if you have a"
            echo "*** shared version of the library, which you do not appear to have."
            if test yes = "$module"; then
              echo "*** But as you try to build a module library, libtool will still create "
              echo "*** a static module, that should work as long as the dlopening application"
              echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
              if test -z "$global_symbol_pipe"; then
                echo
                echo "*** However, this would only work if libtool was able to extract symbol"
                echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
                echo "*** not find such a program.  So, this module is probably useless."
                echo "*** 'nm' from GNU binutils and a full rebuild may help."
              fi
              if test no = "$build_old_libs"; then
                build_libtool_libs=module
                build_old_libs=yes
              else
                build_libtool_libs=no
              fi
            fi
          else
            deplibs="$dir/$old_library $deplibs"
            link_static=yes
          fi
        fi # link shared/static library?

        if test lib = "$linkmode"; then
          if test -n "$dependency_libs" &&
             { test yes != "$hardcode_into_libs" ||
               test yes = "$build_old_libs" ||
               test yes = "$link_static"; }; then
            # Extract -R from dependency_libs
            temp_deplibs=
            for libdir in $dependency_libs; do
              case $libdir in
              -R*) func_stripname '-R' '' "$libdir"
                   temp_xrpath=$func_stripname_result
                   case " $xrpath " in
                   *" $temp_xrpath "*) ;;
                   *) func_append xrpath " $temp_xrpath";;
                   esac;;
              *) func_append temp_deplibs " $libdir";;
              esac
            done
            dependency_libs=$temp_deplibs
          fi

          func_append newlib_search_path " $absdir"
          # Link against this library
          test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
          # ... and its dependency_libs
          tmp_libs=
          for deplib in $dependency_libs; do
            newdependency_libs="$deplib $newdependency_libs"
            case $deplib in
              -L*) func_stripname '-L' '' "$deplib"
                   func_resolve_sysroot "$func_stripname_result";;
              *) func_resolve_sysroot "$deplib" ;;
            esac
            if $opt_preserve_dup_deps; then
              case "$tmp_libs " in
              *" $func_resolve_sysroot_result "*)
                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
              esac
            fi
            func_append tmp_libs " $func_resolve_sysroot_result"
          done

          if test no != "$link_all_deplibs"; then
            # Add the search paths of all dependency libraries
            for deplib in $dependency_libs; do
              path=
              case $deplib in
              -L*) path=$deplib ;;
              *.la)
                func_resolve_sysroot "$deplib"
                deplib=$func_resolve_sysroot_result
                func_dirname "$deplib" "" "."
                dir=$func_dirname_result
                # We need an absolute path.
                case $dir in
                [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
                *)
                  absdir=`cd "$dir" && pwd`
                  if test -z "$absdir"; then
                    func_warning "cannot determine absolute directory name of '$dir'"
                    absdir=$dir
                  fi
                  ;;
                esac
                if $GREP "^installed=no" $deplib > /dev/null; then
                case $host in
                *-*-darwin*)
                  depdepl=
                  eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
                  if test -n "$deplibrary_names"; then
                    for tmp in $deplibrary_names; do
                      depdepl=$tmp
                    done
                    if test -f "$absdir/$objdir/$depdepl"; then
                      depdepl=$absdir/$objdir/$depdepl
                      darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
                      if test -z "$darwin_install_name"; then
                          darwin_install_name=`$OTOOL64 -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                      fi
                      func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
                      func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
                      path=
                    fi
                  fi
                  ;;
                *)
                  path=-L$absdir/$objdir
                  ;;
                esac
                else
                  eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
                  test -z "$libdir" && \
                    func_fatal_error "'$deplib' is not a valid libtool archive"
                  test "$absdir" != "$libdir" && \
                    func_warning "'$deplib' seems to be moved"

                  path=-L$absdir
                fi
                ;;
              esac
              case " $deplibs " in
              *" $path "*) ;;
              *) deplibs="$path $deplibs" ;;
              esac
            done
          fi # link_all_deplibs != no
        fi # linkmode = lib
      done # for deplib in $libs
      if test link = "$pass"; then
        if test prog = "$linkmode"; then
          compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
          finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
        else
          compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
        fi
      fi
      dependency_libs=$newdependency_libs
      if test dlpreopen = "$pass"; then
        # Link the dlpreopened libraries before other libraries
        for deplib in $save_deplibs; do
          deplibs="$deplib $deplibs"
        done
      fi
      if test dlopen != "$pass"; then
        test conv = "$pass" || {
          # Make sure lib_search_path contains only unique directories.
          lib_search_path=
          for dir in $newlib_search_path; do
            case "$lib_search_path " in
            *" $dir "*) ;;
            *) func_append lib_search_path " $dir" ;;
            esac
          done
          newlib_search_path=
        }

        if test prog,link = "$linkmode,$pass"; then
          vars="compile_deplibs finalize_deplibs"
        else
          vars=deplibs
        fi
        for var in $vars dependency_libs; do
          # Add libraries to $var in reverse order
          eval tmp_libs=\"\$$var\"
          new_libs=
          for deplib in $tmp_libs; do
            # FIXME: Pedantically, this is the right thing to do, so
            #        that some nasty dependency loop isn't accidentally
            #        broken:
            #new_libs="$deplib $new_libs"
            # Pragmatically, this seems to cause very few problems in
            # practice:
            case $deplib in
            -L*) new_libs="$deplib $new_libs" ;;
            -R*) ;;
            *)
              # And here is the reason: when a library appears more
              # than once as an explicit dependence of a library, or
              # is implicitly linked in more than once by the
              # compiler, it is considered special, and multiple
              # occurrences thereof are not removed.  Compare this
              # with having the same library being listed as a
              # dependency of multiple other libraries: in this case,
              # we know (pedantically, we assume) the library does not
              # need to be listed more than once, so we keep only the
              # last copy.  This is not always right, but it is rare
              # enough that we require users that really mean to play
              # such unportable linking tricks to link the library
              # using -Wl,-lname, so that libtool does not consider it
              # for duplicate removal.
              case " $specialdeplibs " in
              *" $deplib "*) new_libs="$deplib $new_libs" ;;
              *)
                case " $new_libs " in
                *" $deplib "*) ;;
                *) new_libs="$deplib $new_libs" ;;
                esac
                ;;
              esac
              ;;
            esac
          done
          tmp_libs=
          for deplib in $new_libs; do
            case $deplib in
            -L*)
              case " $tmp_libs " in
              *" $deplib "*) ;;
              *) func_append tmp_libs " $deplib" ;;
              esac
              ;;
            *) func_append tmp_libs " $deplib" ;;
            esac
          done
          eval $var=\"$tmp_libs\"
        done # for var
      fi

      # Add Sun CC postdeps if required:
      test CXX = "$tagname" && {
        case $host_os in
        linux*)
          case `$CC -V 2>&1 | sed 5q` in
          *Sun\ C*) # Sun C++ 5.9
            func_suncc_cstd_abi

            if test no != "$suncc_use_cstd_abi"; then
              func_append postdeps ' -library=Cstd -library=Crun'
            fi
            ;;
          esac
          ;;

        solaris*)
          func_cc_basename "$CC"
          case $func_cc_basename_result in
          CC* | sunCC*)
            func_suncc_cstd_abi

            if test no != "$suncc_use_cstd_abi"; then
              func_append postdeps ' -library=Cstd -library=Crun'
            fi
            ;;
          esac
          ;;
        esac
      }

      # Last step: remove runtime libs from dependency_libs
      # (they stay in deplibs)
      tmp_libs=
      for i in $dependency_libs; do
        case " $predeps $postdeps $compiler_lib_search_path " in
        *" $i "*)
          i=
          ;;
        esac
        if test -n "$i"; then
          func_append tmp_libs " $i"
        fi
      done
      dependency_libs=$tmp_libs
    done # for pass
    if test prog = "$linkmode"; then
      dlfiles=$newdlfiles
    fi
    if test prog = "$linkmode" || test lib = "$linkmode"; then
      dlprefiles=$newdlprefiles
    fi

    case $linkmode in
    oldlib)
      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
        func_warning "'-dlopen' is ignored for archives"
      fi

      case " $deplibs" in
      *\ -l* | *\ -L*)
        func_warning "'-l' and '-L' are ignored for archives" ;;
      esac

      test -n "$rpath" && \
        func_warning "'-rpath' is ignored for archives"

      test -n "$xrpath" && \
        func_warning "'-R' is ignored for archives"

      test -n "$vinfo" && \
        func_warning "'-version-info/-version-number' is ignored for archives"

      test -n "$release" && \
        func_warning "'-release' is ignored for archives"

      test -n "$export_symbols$export_symbols_regex" && \
        func_warning "'-export-symbols' is ignored for archives"

      # Now set the variables for building old libraries.
      build_libtool_libs=no
      oldlibs=$output
      func_append objs "$old_deplibs"
      ;;

    lib)
      # Make sure we only generate libraries of the form 'libNAME.la'.
      case $outputname in
      lib*)
        func_stripname 'lib' '.la' "$outputname"
        name=$func_stripname_result
        eval shared_ext=\"$shrext_cmds\"
        eval libname=\"$libname_spec\"
        ;;
      *)
        test no = "$module" \
          && func_fatal_help "libtool library '$output' must begin with 'lib'"

        if test no != "$need_lib_prefix"; then
          # Add the "lib" prefix for modules if required
          func_stripname '' '.la' "$outputname"
          name=$func_stripname_result
          eval shared_ext=\"$shrext_cmds\"
          eval libname=\"$libname_spec\"
        else
          func_stripname '' '.la' "$outputname"
          libname=$func_stripname_result
        fi
        ;;
      esac

      if test -n "$objs"; then
        if test pass_all != "$deplibs_check_method"; then
          func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
        else
          echo
          $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
          $ECHO "*** objects $objs is not portable!"
          func_append libobjs " $objs"
        fi
      fi

      test no = "$dlself" \
        || func_warning "'-dlopen self' is ignored for libtool libraries"

      set dummy $rpath
      shift
      test 1 -lt "$#" \
        && func_warning "ignoring multiple '-rpath's for a libtool library"

      install_libdir=$1

      oldlibs=
      if test -z "$rpath"; then
        if test yes = "$build_libtool_libs"; then
          # Building a libtool convenience library.
          # Some compilers have problems with a '.al' extension so
          # convenience libraries should have the same extension an
          # archive normally would.
          oldlibs="$output_objdir/$libname.$libext $oldlibs"
          build_libtool_libs=convenience
          build_old_libs=yes
        fi

        test -n "$vinfo" && \
          func_warning "'-version-info/-version-number' is ignored for convenience libraries"

        test -n "$release" && \
          func_warning "'-release' is ignored for convenience libraries"
      else

        # Parse the version information argument.
        save_ifs=$IFS; IFS=:
        set dummy $vinfo 0 0 0
        shift
        IFS=$save_ifs

        test -n "$7" && \
          func_fatal_help "too many parameters to '-version-info'"

        # convert absolute version numbers to libtool ages
        # this retains compatibility with .la files and attempts
        # to make the code below a bit more comprehensible

        case $vinfo_number in
        yes)
          number_major=$1
          number_minor=$2
          number_revision=$3
          #
          # There are really only two kinds -- those that
          # use the current revision as the major version
          # and those that subtract age and use age as
          # a minor version.  But, then there is irix
          # that has an extra 1 added just for fun
          #
          case $version_type in
          # correct linux to gnu/linux during the next big refactor
          darwin|freebsd-elf|linux|osf|windows|none)
            func_arith $number_major + $number_minor
            current=$func_arith_result
            age=$number_minor
            revision=$number_revision
            ;;
          freebsd-aout|qnx|sunos)
            current=$number_major
            revision=$number_minor
            age=0
            ;;
          irix|nonstopux)
            func_arith $number_major + $number_minor
            current=$func_arith_result
            age=$number_minor
            revision=$number_minor
            lt_irix_increment=no
            ;;
          esac
          ;;
        no)
          current=$1
          revision=$2
          age=$3
          ;;
        esac

        # Check that each of the things are valid numbers.
        case $current in
        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        *)
          func_error "CURRENT '$current' must be a nonnegative integer"
          func_fatal_error "'$vinfo' is not valid version information"
          ;;
        esac

        case $revision in
        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        *)
          func_error "REVISION '$revision' must be a nonnegative integer"
          func_fatal_error "'$vinfo' is not valid version information"
          ;;
        esac

        case $age in
        0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
        *)
          func_error "AGE '$age' must be a nonnegative integer"
          func_fatal_error "'$vinfo' is not valid version information"
          ;;
        esac

        if test "$age" -gt "$current"; then
          func_error "AGE '$age' is greater than the current interface number '$current'"
          func_fatal_error "'$vinfo' is not valid version information"
        fi

        # Calculate the version variables.
        major=
        versuffix=
        verstring=
        case $version_type in
        none) ;;

        darwin)
          # Like Linux, but with the current version available in
          # verstring for coding it into the library header
          func_arith $current - $age
          major=.$func_arith_result
          versuffix=$major.$age.$revision
          # Darwin ld doesn't like 0 for these options...
          func_arith $current + 1
          minor_current=$func_arith_result
          xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
          verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
          # On Darwin other compilers
          case $CC in
              nagfor*)
                  verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
                  ;;
              *)
                  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
                  ;;
          esac
          ;;

        freebsd-aout)
          major=.$current
          versuffix=.$current.$revision
          ;;

        freebsd-elf)
          func_arith $current - $age
          major=.$func_arith_result
          versuffix=$major.$age.$revision
          ;;

        irix | nonstopux)
          if test no = "$lt_irix_increment"; then
            func_arith $current - $age
          else
            func_arith $current - $age + 1
          fi
          major=$func_arith_result

          case $version_type in
            nonstopux) verstring_prefix=nonstopux ;;
            *)         verstring_prefix=sgi ;;
          esac
          verstring=$verstring_prefix$major.$revision

          # Add in all the interfaces that we are compatible with.
          loop=$revision
          while test 0 -ne "$loop"; do
            func_arith $revision - $loop
            iface=$func_arith_result
            func_arith $loop - 1
            loop=$func_arith_result
            verstring=$verstring_prefix$major.$iface:$verstring
          done

          # Before this point, $major must not contain '.'.
          major=.$major
          versuffix=$major.$revision
          ;;

        linux) # correct to gnu/linux during the next big refactor
          func_arith $current - $age
          major=.$func_arith_result
          versuffix=$major.$age.$revision
          ;;

        osf)
          func_arith $current - $age
          major=.$func_arith_result
          versuffix=.$current.$age.$revision
          verstring=$current.$age.$revision

          # Add in all the interfaces that we are compatible with.
          loop=$age
          while test 0 -ne "$loop"; do
            func_arith $current - $loop
            iface=$func_arith_result
            func_arith $loop - 1
            loop=$func_arith_result
            verstring=$verstring:$iface.0
          done

          # Make executables depend on our current version.
          func_append verstring ":$current.0"
          ;;

        qnx)
          major=.$current
          versuffix=.$current
          ;;

        sco)
          major=.$current
          versuffix=.$current
          ;;

        sunos)
          major=.$current
          versuffix=.$current.$revision
          ;;

        windows)
          # Use '-' rather than '.', since we only want one
          # extension on DOS 8.3 file systems.
          func_arith $current - $age
          major=$func_arith_result
          versuffix=-$major
          ;;

        *)
          func_fatal_configuration "unknown library version type '$version_type'"
          ;;
        esac

        # Clear the version info if we defaulted, and they specified a release.
        if test -z "$vinfo" && test -n "$release"; then
          major=
          case $version_type in
          darwin)
            # we can't check for "0.0" in archive_cmds due to quoting
            # problems, so we reset it completely
            verstring=
            ;;
          *)
            verstring=0.0
            ;;
          esac
          if test no = "$need_version"; then
            versuffix=
          else
            versuffix=.0.0
          fi
        fi

        # Remove version info from name if versioning should be avoided
        if test yes,no = "$avoid_version,$need_version"; then
          major=
          versuffix=
          verstring=
        fi

        # Check to see if the archive will have undefined symbols.
        if test yes = "$allow_undefined"; then
          if test unsupported = "$allow_undefined_flag"; then
            if test yes = "$build_old_libs"; then
              func_warning "undefined symbols not allowed in $host shared libraries; building static only"
              build_libtool_libs=no
            else
              func_fatal_error "can't build $host shared library unless -no-undefined is specified"
            fi
          fi
        else
          # Don't allow undefined symbols.
          allow_undefined_flag=$no_undefined_flag
        fi

      fi

      func_generate_dlsyms "$libname" "$libname" :
      func_append libobjs " $symfileobj"
      test " " = "$libobjs" && libobjs=

      if test relink != "$opt_mode"; then
        # Remove our outputs, but don't remove object files since they
        # may have been created when compiling PIC objects.
        removelist=
        tempremovelist=`$ECHO "$output_objdir/*"`
        for p in $tempremovelist; do
          case $p in
            *.$objext | *.gcno)
               ;;
            $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
               if test -n "$precious_files_regex"; then
                 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
                 then
                   continue
                 fi
               fi
               func_append removelist " $p"
               ;;
            *) ;;
          esac
        done
        test -n "$removelist" && \
          func_show_eval "${RM}r \$removelist"
      fi

      # Now set the variables for building old libraries.
      if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
        func_append oldlibs " $output_objdir/$libname.$libext"

        # Transform .lo files to .o files.
        oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
      fi

      # Eliminate all temporary directories.
      #for path in $notinst_path; do
      # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
      # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
      # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
      #done

      if test -n "$xrpath"; then
        # If the user specified any rpath flags, then add them.
        temp_xrpath=
        for libdir in $xrpath; do
          func_replace_sysroot "$libdir"
          func_append temp_xrpath " -R$func_replace_sysroot_result"
          case "$finalize_rpath " in
          *" $libdir "*) ;;
          *) func_append finalize_rpath " $libdir" ;;
          esac
        done
        if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
          dependency_libs="$temp_xrpath $dependency_libs"
        fi
      fi

      # Make sure dlfiles contains only unique files that won't be dlpreopened
      old_dlfiles=$dlfiles
      dlfiles=
      for lib in $old_dlfiles; do
        case " $dlprefiles $dlfiles " in
        *" $lib "*) ;;
        *) func_append dlfiles " $lib" ;;
        esac
      done

      # Make sure dlprefiles contains only unique files
      old_dlprefiles=$dlprefiles
      dlprefiles=
      for lib in $old_dlprefiles; do
        case "$dlprefiles " in
        *" $lib "*) ;;
        *) func_append dlprefiles " $lib" ;;
        esac
      done

      if test yes = "$build_libtool_libs"; then
        if test -n "$rpath"; then
          case $host in
          *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
            # these systems don't actually have a c library (as such)!
            ;;
          *-*-rhapsody* | *-*-darwin1.[012])
            # Rhapsody C library is in the System framework
            func_append deplibs " System.ltframework"
            ;;
          *-*-netbsd*)
            # Don't link with libc until the a.out ld.so is fixed.
            ;;
          *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
            # Do not include libc due to us having libc/libc_r.
            ;;
          *-*-sco3.2v5* | *-*-sco5v6*)
            # Causes problems with __ctype
            ;;
          *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
            # Compiler inserts libc in the correct place for threads to work
            ;;
          *)
            # Add libc to deplibs on all other systems if necessary.
            if test yes = "$build_libtool_need_lc"; then
              func_append deplibs " -lc"
            fi
            ;;
          esac
        fi

        # Transform deplibs into only deplibs that can be linked in shared.
        name_save=$name
        libname_save=$libname
        release_save=$release
        versuffix_save=$versuffix
        major_save=$major
        # I'm not sure if I'm treating the release correctly.  I think
        # release should show up in the -l (ie -lgmp5) so we don't want to
        # add it in twice.  Is that correct?
        release=
        versuffix=
        major=
        newdeplibs=
        droppeddeps=no
        case $deplibs_check_method in
        pass_all)
          # Don't check for shared/static.  Everything works.
          # This might be a little naive.  We might want to check
          # whether the library exists or not.  But this is on
          # osf3 & osf4 and I'm not really sure... Just
          # implementing what was already the behavior.
          newdeplibs=$deplibs
          ;;
        test_compile)
          # This code stresses the "libraries are programs" paradigm to its
          # limits. Maybe even breaks it.  We compile a program, linking it
          # against the deplibs as a proxy for the library.  Then we can check
          # whether they linked in statically or dynamically with ldd.
          $opt_dry_run || $RM conftest.c
          cat > conftest.c <<EOF
          int main() { return 0; }
EOF
          $opt_dry_run || $RM conftest
          if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
            ldd_output=`ldd conftest`
            for i in $deplibs; do
              case $i in
              -l*)
                func_stripname -l '' "$i"
                name=$func_stripname_result
                if test yes = "$allow_libtool_libs_with_static_runtimes"; then
                  case " $predeps $postdeps " in
                  *" $i "*)
                    func_append newdeplibs " $i"
                    i=
                    ;;
                  esac
                fi
                if test -n "$i"; then
                  libname=`eval "\\$ECHO \"$libname_spec\""`
                  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
                  set dummy $deplib_matches; shift
                  deplib_match=$1
                  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
                    func_append newdeplibs " $i"
                  else
                    droppeddeps=yes
                    echo
                    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
                    echo "*** I have the capability to make that library automatically link in when"
                    echo "*** you link to this library.  But I can only do this if you have a"
                    echo "*** shared version of the library, which I believe you do not have"
                    echo "*** because a test_compile did reveal that the linker did not use it for"
                    echo "*** its dynamic dependency list that programs get resolved with at runtime."
                  fi
                fi
                ;;
              *)
                func_append newdeplibs " $i"
                ;;
              esac
            done
          else
            # Error occurred in the first compile.  Let's try to salvage
            # the situation: Compile a separate program for each library.
            for i in $deplibs; do
              case $i in
              -l*)
                func_stripname -l '' "$i"
                name=$func_stripname_result
                $opt_dry_run || $RM conftest
                if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
                  ldd_output=`ldd conftest`
                  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
                    case " $predeps $postdeps " in
                    *" $i "*)
                      func_append newdeplibs " $i"
                      i=
                      ;;
                    esac
                  fi
                  if test -n "$i"; then
                    libname=`eval "\\$ECHO \"$libname_spec\""`
                    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
                    set dummy $deplib_matches; shift
                    deplib_match=$1
                    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
                      func_append newdeplibs " $i"
                    else
                      droppeddeps=yes
                      echo
                      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
                      echo "*** I have the capability to make that library automatically link in when"
                      echo "*** you link to this library.  But I can only do this if you have a"
                      echo "*** shared version of the library, which you do not appear to have"
                      echo "*** because a test_compile did reveal that the linker did not use this one"
                      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
                    fi
                  fi
                else
                  droppeddeps=yes
                  echo
                  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
                  echo "*** make it link in!  You will probably need to install it or some"
                  echo "*** library that it depends on before this library will be fully"
                  echo "*** functional.  Installing it before continuing would be even better."
                fi
                ;;
              *)
                func_append newdeplibs " $i"
                ;;
              esac
            done
          fi
          ;;
        file_magic*)
          set dummy $deplibs_check_method; shift
          file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
          for a_deplib in $deplibs; do
            case $a_deplib in
            -l*)
              func_stripname -l '' "$a_deplib"
              name=$func_stripname_result
              if test yes = "$allow_libtool_libs_with_static_runtimes"; then
                case " $predeps $postdeps " in
                *" $a_deplib "*)
                  func_append newdeplibs " $a_deplib"
                  a_deplib=
                  ;;
                esac
              fi
              if test -n "$a_deplib"; then
                libname=`eval "\\$ECHO \"$libname_spec\""`
                if test -n "$file_magic_glob"; then
                  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
                else
                  libnameglob=$libname
                fi
                test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
                  if test yes = "$want_nocaseglob"; then
                    shopt -s nocaseglob
                    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
                    $nocaseglob
                  else
                    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
                  fi
                  for potent_lib in $potential_libs; do
                      # Follow soft links.
                      if ls -lLd "$potent_lib" 2>/dev/null |
                         $GREP " -> " >/dev/null; then
                        continue
                      fi
                      # The statement above tries to avoid entering an
                      # endless loop below, in case of cyclic links.
                      # We might still enter an endless loop, since a link
                      # loop can be closed while we follow links,
                      # but so what?
                      potlib=$potent_lib
                      while test -h "$potlib" 2>/dev/null; do
                        potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
                        case $potliblink in
                        [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
                        *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
                        esac
                      done
                      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
                         $SED -e 10q |
                         $EGREP "$file_magic_regex" > /dev/null; then
                        func_append newdeplibs " $a_deplib"
                        a_deplib=
                        break 2
                      fi
                  done
                done
              fi
              if test -n "$a_deplib"; then
                droppeddeps=yes
                echo
                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
                echo "*** I have the capability to make that library automatically link in when"
                echo "*** you link to this library.  But I can only do this if you have a"
                echo "*** shared version of the library, which you do not appear to have"
                echo "*** because I did check the linker path looking for a file starting"
                if test -z "$potlib"; then
                  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
                else
                  $ECHO "*** with $libname and none of the candidates passed a file format test"
                  $ECHO "*** using a file magic. Last file checked: $potlib"
                fi
              fi
              ;;
            *)
              # Add a -L argument.
              func_append newdeplibs " $a_deplib"
              ;;
            esac
          done # Gone through all deplibs.
          ;;
        match_pattern*)
          set dummy $deplibs_check_method; shift
          match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
          for a_deplib in $deplibs; do
            case $a_deplib in
            -l*)
              func_stripname -l '' "$a_deplib"
              name=$func_stripname_result
              if test yes = "$allow_libtool_libs_with_static_runtimes"; then
                case " $predeps $postdeps " in
                *" $a_deplib "*)
                  func_append newdeplibs " $a_deplib"
                  a_deplib=
                  ;;
                esac
              fi
              if test -n "$a_deplib"; then
                libname=`eval "\\$ECHO \"$libname_spec\""`
                for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
                  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
                  for potent_lib in $potential_libs; do
                    potlib=$potent_lib # see symlink-check above in file_magic test
                    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
                       $EGREP "$match_pattern_regex" > /dev/null; then
                      func_append newdeplibs " $a_deplib"
                      a_deplib=
                      break 2
                    fi
                  done
                done
              fi
              if test -n "$a_deplib"; then
                droppeddeps=yes
                echo
                $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
                echo "*** I have the capability to make that library automatically link in when"
                echo "*** you link to this library.  But I can only do this if you have a"
                echo "*** shared version of the library, which you do not appear to have"
                echo "*** because I did check the linker path looking for a file starting"
                if test -z "$potlib"; then
                  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
                else
                  $ECHO "*** with $libname and none of the candidates passed a file format test"
                  $ECHO "*** using a regex pattern. Last file checked: $potlib"
                fi
              fi
              ;;
            *)
              # Add a -L argument.
              func_append newdeplibs " $a_deplib"
              ;;
            esac
          done # Gone through all deplibs.
          ;;
        none | unknown | *)
          newdeplibs=
          tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
          if test yes = "$allow_libtool_libs_with_static_runtimes"; then
            for i in $predeps $postdeps; do
              # can't use Xsed below, because $i might contain '/'
              tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
            done
          fi
          case $tmp_deplibs in
          *[!\  \ ]*)
            echo
            if test none = "$deplibs_check_method"; then
              echo "*** Warning: inter-library dependencies are not supported in this platform."
            else
              echo "*** Warning: inter-library dependencies are not known to be supported."
            fi
            echo "*** All declared inter-library dependencies are being dropped."
            droppeddeps=yes
            ;;
          esac
          ;;
        esac
        versuffix=$versuffix_save
        major=$major_save
        release=$release_save
        libname=$libname_save
        name=$name_save

        case $host in
        *-*-rhapsody* | *-*-darwin1.[012])
          # On Rhapsody replace the C library with the System framework
          newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
          ;;
        esac

        if test yes = "$droppeddeps"; then
          if test yes = "$module"; then
            echo
            echo "*** Warning: libtool could not satisfy all declared inter-library"
            $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
            echo "*** a static module, that should work as long as the dlopening"
            echo "*** application is linked with the -dlopen flag."
            if test -z "$global_symbol_pipe"; then
              echo
              echo "*** However, this would only work if libtool was able to extract symbol"
              echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
              echo "*** not find such a program.  So, this module is probably useless."
              echo "*** 'nm' from GNU binutils and a full rebuild may help."
            fi
            if test no = "$build_old_libs"; then
              oldlibs=$output_objdir/$libname.$libext
              build_libtool_libs=module
              build_old_libs=yes
            else
              build_libtool_libs=no
            fi
          else
            echo "*** The inter-library dependencies that have been dropped here will be"
            echo "*** automatically added whenever a program is linked with this library"
            echo "*** or is declared to -dlopen it."

            if test no = "$allow_undefined"; then
              echo
              echo "*** Since this library must not contain undefined symbols,"
              echo "*** because either the platform does not support them or"
              echo "*** it was explicitly requested with -no-undefined,"
              echo "*** libtool will only create a static version of it."
              if test no = "$build_old_libs"; then
                oldlibs=$output_objdir/$libname.$libext
                build_libtool_libs=module
                build_old_libs=yes
              else
                build_libtool_libs=no
              fi
            fi
          fi
        fi
        # Done checking deplibs!
        deplibs=$newdeplibs
      fi
      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
      case $host in
        *-*-darwin*)
          newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
          new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
          deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
          ;;
      esac

      # move library search paths that coincide with paths to not yet
      # installed libraries to the beginning of the library search list
      new_libs=
      for path in $notinst_path; do
        case " $new_libs " in
        *" -L$path/$objdir "*) ;;
        *)
          case " $deplibs " in
          *" -L$path/$objdir "*)
            func_append new_libs " -L$path/$objdir" ;;
          esac
          ;;
        esac
      done
      for deplib in $deplibs; do
        case $deplib in
        -L*)
          case " $new_libs " in
          *" $deplib "*) ;;
          *) func_append new_libs " $deplib" ;;
          esac
          ;;
        *) func_append new_libs " $deplib" ;;
        esac
      done
      deplibs=$new_libs

      # All the library-specific variables (install_libdir is set above).
      library_names=
      old_library=
      dlname=

      # Test again, we may have decided not to build it any more
      if test yes = "$build_libtool_libs"; then
        # Remove $wl instances when linking with ld.
        # FIXME: should test the right _cmds variable.
        case $archive_cmds in
          *\$LD\ *) wl= ;;
        esac
        if test yes = "$hardcode_into_libs"; then
          # Hardcode the library paths
          hardcode_libdirs=
          dep_rpath=
          rpath=$finalize_rpath
          test relink = "$opt_mode" || rpath=$compile_rpath$rpath
          for libdir in $rpath; do
            if test -n "$hardcode_libdir_flag_spec"; then
              if test -n "$hardcode_libdir_separator"; then
                func_replace_sysroot "$libdir"
                libdir=$func_replace_sysroot_result
                if test -z "$hardcode_libdirs"; then
                  hardcode_libdirs=$libdir
                else
                  # Just accumulate the unique libdirs.
                  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
                  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                    ;;
                  *)
                    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
                    ;;
                  esac
                fi
              else
                eval flag=\"$hardcode_libdir_flag_spec\"
                func_append dep_rpath " $flag"
              fi
            elif test -n "$runpath_var"; then
              case "$perm_rpath " in
              *" $libdir "*) ;;
              *) func_append perm_rpath " $libdir" ;;
              esac
            fi
          done
          # Substitute the hardcoded libdirs into the rpath.
          if test -n "$hardcode_libdir_separator" &&
             test -n "$hardcode_libdirs"; then
            libdir=$hardcode_libdirs
            eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
          fi
          if test -n "$runpath_var" && test -n "$perm_rpath"; then
            # We should set the runpath_var.
            rpath=
            for dir in $perm_rpath; do
              func_append rpath "$dir:"
            done
            eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
          fi
          test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
        fi

        shlibpath=$finalize_shlibpath
        test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
        if test -n "$shlibpath"; then
          eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
        fi

        # Get the real and link names of the library.
        eval shared_ext=\"$shrext_cmds\"
        eval library_names=\"$library_names_spec\"
        set dummy $library_names
        shift
        realname=$1
        shift

        if test -n "$soname_spec"; then
          eval soname=\"$soname_spec\"
        else
          soname=$realname
        fi
        if test -z "$dlname"; then
          dlname=$soname
        fi

        lib=$output_objdir/$realname
        linknames=
        for link
        do
          func_append linknames " $link"
        done

        # Use standard objects if they are pic
        test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
        test "X$libobjs" = "X " && libobjs=

        delfiles=
        if test -n "$export_symbols" && test -n "$include_expsyms"; then
          $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
          export_symbols=$output_objdir/$libname.uexp
          func_append delfiles " $export_symbols"
        fi

        orig_export_symbols=
        case $host_os in
        cygwin* | mingw* | cegcc*)
          if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
            # exporting using user supplied symfile
            func_dll_def_p "$export_symbols" || {
              # and it's NOT already a .def file. Must figure out
              # which of the given symbols are data symbols and tag
              # them as such. So, trigger use of export_symbols_cmds.
              # export_symbols gets reassigned inside the "prepare
              # the list of exported symbols" if statement, so the
              # include_expsyms logic still works.
              orig_export_symbols=$export_symbols
              export_symbols=
              always_export_symbols=yes
            }
          fi
          ;;
        esac

        # Prepare the list of exported symbols
        if test -z "$export_symbols"; then
          if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
            func_verbose "generating symbol list for '$libname.la'"
            export_symbols=$output_objdir/$libname.exp
            $opt_dry_run || $RM $export_symbols
            cmds=$export_symbols_cmds
            save_ifs=$IFS; IFS='~'
            for cmd1 in $cmds; do
              IFS=$save_ifs
              # Take the normal branch if the nm_file_list_spec branch
              # doesn't work or if tool conversion is not needed.
              case $nm_file_list_spec~$to_tool_file_cmd in
                *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
                  try_normal_branch=yes
                  eval cmd=\"$cmd1\"
                  func_len " $cmd"
                  len=$func_len_result
                  ;;
                *)
                  try_normal_branch=no
                  ;;
              esac
              if test yes = "$try_normal_branch" \
                 && { test "$len" -lt "$max_cmd_len" \
                      || test "$max_cmd_len" -le -1; }
              then
                func_show_eval "$cmd" 'exit $?'
                skipped_export=false
              elif test -n "$nm_file_list_spec"; then
                func_basename "$output"
                output_la=$func_basename_result
                save_libobjs=$libobjs
                save_output=$output
                output=$output_objdir/$output_la.nm
                func_to_tool_file "$output"
                libobjs=$nm_file_list_spec$func_to_tool_file_result
                func_append delfiles " $output"
                func_verbose "creating $NM input file list: $output"
                for obj in $save_libobjs; do
                  func_to_tool_file "$obj"
                  $ECHO "$func_to_tool_file_result"
                done > "$output"
                eval cmd=\"$cmd1\"
                func_show_eval "$cmd" 'exit $?'
                output=$save_output
                libobjs=$save_libobjs
                skipped_export=false
              else
                # The command line is too long to execute in one step.
                func_verbose "using reloadable object file for export list..."
                skipped_export=:
                # Break out early, otherwise skipped_export may be
                # set to false by a later but shorter cmd.
                break
              fi
            done
            IFS=$save_ifs
            if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
            fi
          fi
        fi

        if test -n "$export_symbols" && test -n "$include_expsyms"; then
          tmp_export_symbols=$export_symbols
          test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
          $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
        fi

        if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
          # The given exports_symbols file has to be filtered, so filter it.
          func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
          # FIXME: $output_objdir/$libname.filter potentially contains lots of
          # 's' commands, which not all seds can handle. GNU sed should be fine
          # though. Also, the filter scales superlinearly with the number of
          # global variables. join(1) would be nice here, but unfortunately
          # isn't a blessed tool.
          $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
          func_append delfiles " $export_symbols $output_objdir/$libname.filter"
          export_symbols=$output_objdir/$libname.def
          $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
        fi

        tmp_deplibs=
        for test_deplib in $deplibs; do
          case " $convenience " in
          *" $test_deplib "*) ;;
          *)
            func_append tmp_deplibs " $test_deplib"
            ;;
          esac
        done
        deplibs=$tmp_deplibs

        if test -n "$convenience"; then
          if test -n "$whole_archive_flag_spec" &&
            test yes = "$compiler_needs_object" &&
            test -z "$libobjs"; then
            # extract the archives, so we have objects to list.
            # TODO: could optimize this to just extract one archive.
            whole_archive_flag_spec=
          fi
          if test -n "$whole_archive_flag_spec"; then
            save_libobjs=$libobjs
            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
            test "X$libobjs" = "X " && libobjs=
          else
            gentop=$output_objdir/${outputname}x
            func_append generated " $gentop"

            func_extract_archives $gentop $convenience
            func_append libobjs " $func_extract_archives_result"
            test "X$libobjs" = "X " && libobjs=
          fi
        fi

        if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
          eval flag=\"$thread_safe_flag_spec\"
          func_append linker_flags " $flag"
        fi

        # Make a backup of the uninstalled library when relinking
        if test relink = "$opt_mode"; then
          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
        fi

        # Do each of the archive commands.
        if test yes = "$module" && test -n "$module_cmds"; then
          if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
            eval test_cmds=\"$module_expsym_cmds\"
            cmds=$module_expsym_cmds
          else
            eval test_cmds=\"$module_cmds\"
            cmds=$module_cmds
          fi
        else
          if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
            eval test_cmds=\"$archive_expsym_cmds\"
            cmds=$archive_expsym_cmds
          else
            eval test_cmds=\"$archive_cmds\"
            cmds=$archive_cmds
          fi
        fi

        if test : != "$skipped_export" &&
           func_len " $test_cmds" &&
           len=$func_len_result &&
           test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
          :
        else
          # The command line is too long to link in one step, link piecewise
          # or, if using GNU ld and skipped_export is not :, use a linker
          # script.

          # Save the value of $output and $libobjs because we want to
          # use them later.  If we have whole_archive_flag_spec, we
          # want to use save_libobjs as it was before
          # whole_archive_flag_spec was expanded, because we can't
          # assume the linker understands whole_archive_flag_spec.
          # This may have to be revisited, in case too many
          # convenience libraries get linked in and end up exceeding
          # the spec.
          if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
            save_libobjs=$libobjs
          fi
          save_output=$output
          func_basename "$output"
          output_la=$func_basename_result

          # Clear the reloadable object creation command queue and
          # initialize k to one.
          test_cmds=
          concat_cmds=
          objlist=
          last_robj=
          k=1

          if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
            output=$output_objdir/$output_la.lnkscript
            func_verbose "creating GNU ld script: $output"
            echo 'INPUT (' > $output
            for obj in $save_libobjs
            do
              func_to_tool_file "$obj"
              $ECHO "$func_to_tool_file_result" >> $output
            done
            echo ')' >> $output
            func_append delfiles " $output"
            func_to_tool_file "$output"
            output=$func_to_tool_file_result
          elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
            output=$output_objdir/$output_la.lnk
            func_verbose "creating linker input file list: $output"
            : > $output
            set x $save_libobjs
            shift
            firstobj=
            if test yes = "$compiler_needs_object"; then
              firstobj="$1 "
              shift
            fi
            for obj
            do
              func_to_tool_file "$obj"
              $ECHO "$func_to_tool_file_result" >> $output
            done
            func_append delfiles " $output"
            func_to_tool_file "$output"
            output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
          else
            if test -n "$save_libobjs"; then
              func_verbose "creating reloadable object files..."
              output=$output_objdir/$output_la-$k.$objext
              eval test_cmds=\"$reload_cmds\"
              func_len " $test_cmds"
              len0=$func_len_result
              len=$len0

              # Loop over the list of objects to be linked.
              for obj in $save_libobjs
              do
                func_len " $obj"
                func_arith $len + $func_len_result
                len=$func_arith_result
                if test -z "$objlist" ||
                   test "$len" -lt "$max_cmd_len"; then
                  func_append objlist " $obj"
                else
                  # The command $test_cmds is almost too long, add a
                  # command to the queue.
                  if test 1 -eq "$k"; then
                    # The first file doesn't have a previous command to add.
                    reload_objs=$objlist
                    eval concat_cmds=\"$reload_cmds\"
                  else
                    # All subsequent reloadable object files will link in
                    # the last one created.
                    reload_objs="$objlist $last_robj"
                    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
                  fi
                  last_robj=$output_objdir/$output_la-$k.$objext
                  func_arith $k + 1
                  k=$func_arith_result
                  output=$output_objdir/$output_la-$k.$objext
                  objlist=" $obj"
                  func_len " $last_robj"
                  func_arith $len0 + $func_len_result
                  len=$func_arith_result
                fi
              done
              # Handle the remaining objects by creating one last
              # reloadable object file.  All subsequent reloadable object
              # files will link in the last one created.
              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
              reload_objs="$objlist $last_robj"
              eval concat_cmds=\"\$concat_cmds$reload_cmds\"
              if test -n "$last_robj"; then
                eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
              fi
              func_append delfiles " $output"

            else
              output=
            fi

            ${skipped_export-false} && {
              func_verbose "generating symbol list for '$libname.la'"
              export_symbols=$output_objdir/$libname.exp
              $opt_dry_run || $RM $export_symbols
              libobjs=$output
              # Append the command to create the export file.
              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
              eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
              if test -n "$last_robj"; then
                eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
              fi
            }

            test -n "$save_libobjs" &&
              func_verbose "creating a temporary reloadable object file: $output"

            # Loop through the commands generated above and execute them.
            save_ifs=$IFS; IFS='~'
            for cmd in $concat_cmds; do
              IFS=$save_ifs
              $opt_quiet || {
                  func_quote_for_expand "$cmd"
                  eval "func_echo $func_quote_for_expand_result"
              }
              $opt_dry_run || eval "$cmd" || {
                lt_exit=$?

                # Restore the uninstalled library and exit
                if test relink = "$opt_mode"; then
                  ( cd "$output_objdir" && \
                    $RM "${realname}T" && \
                    $MV "${realname}U" "$realname" )
                fi

                exit $lt_exit
              }
            done
            IFS=$save_ifs

            if test -n "$export_symbols_regex" && ${skipped_export-false}; then
              func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
              func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
            fi
          fi

          ${skipped_export-false} && {
            if test -n "$export_symbols" && test -n "$include_expsyms"; then
              tmp_export_symbols=$export_symbols
              test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
              $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
            fi

            if test -n "$orig_export_symbols"; then
              # The given exports_symbols file has to be filtered, so filter it.
              func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
              # FIXME: $output_objdir/$libname.filter potentially contains lots of
              # 's' commands, which not all seds can handle. GNU sed should be fine
              # though. Also, the filter scales superlinearly with the number of
              # global variables. join(1) would be nice here, but unfortunately
              # isn't a blessed tool.
              $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
              func_append delfiles " $export_symbols $output_objdir/$libname.filter"
              export_symbols=$output_objdir/$libname.def
              $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
            fi
          }

          libobjs=$output
          # Restore the value of output.
          output=$save_output

          if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
            eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
            test "X$libobjs" = "X " && libobjs=
          fi
          # Expand the library linking commands again to reset the
          # value of $libobjs for piecewise linking.

          # Do each of the archive commands.
          if test yes = "$module" && test -n "$module_cmds"; then
            if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
              cmds=$module_expsym_cmds
            else
              cmds=$module_cmds
            fi
          else
            if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
              cmds=$archive_expsym_cmds
            else
              cmds=$archive_cmds
            fi
          fi
        fi

        if test -n "$delfiles"; then
          # Append the command to remove temporary files to $cmds.
          eval cmds=\"\$cmds~\$RM $delfiles\"
        fi

        # Add any objects from preloaded convenience libraries
        if test -n "$dlprefiles"; then
          gentop=$output_objdir/${outputname}x
          func_append generated " $gentop"

          func_extract_archives $gentop $dlprefiles
          func_append libobjs " $func_extract_archives_result"
          test "X$libobjs" = "X " && libobjs=
        fi

        save_ifs=$IFS; IFS='~'
        for cmd in $cmds; do
          IFS=$sp$nl
          eval cmd=\"$cmd\"
          IFS=$save_ifs
          $opt_quiet || {
            func_quote_for_expand "$cmd"
            eval "func_echo $func_quote_for_expand_result"
          }
          $opt_dry_run || eval "$cmd" || {
            lt_exit=$?

            # Restore the uninstalled library and exit
            if test relink = "$opt_mode"; then
              ( cd "$output_objdir" && \
                $RM "${realname}T" && \
                $MV "${realname}U" "$realname" )
            fi

            exit $lt_exit
          }
        done
        IFS=$save_ifs

        # Restore the uninstalled library and exit
        if test relink = "$opt_mode"; then
          $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?

          if test -n "$convenience"; then
            if test -z "$whole_archive_flag_spec"; then
              func_show_eval '${RM}r "$gentop"'
            fi
          fi

          exit $EXIT_SUCCESS
        fi

        # Create links to the real library.
        for linkname in $linknames; do
          if test "$realname" != "$linkname"; then
            func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
          fi
        done

        # If -module or -export-dynamic was specified, set the dlname.
        if test yes = "$module" || test yes = "$export_dynamic"; then
          # On all known operating systems, these are identical.
          dlname=$soname
        fi
      fi
      ;;

    obj)
      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
        func_warning "'-dlopen' is ignored for objects"
      fi

      case " $deplibs" in
      *\ -l* | *\ -L*)
        func_warning "'-l' and '-L' are ignored for objects" ;;
      esac

      test -n "$rpath" && \
        func_warning "'-rpath' is ignored for objects"

      test -n "$xrpath" && \
        func_warning "'-R' is ignored for objects"

      test -n "$vinfo" && \
        func_warning "'-version-info' is ignored for objects"

      test -n "$release" && \
        func_warning "'-release' is ignored for objects"

      case $output in
      *.lo)
        test -n "$objs$old_deplibs" && \
          func_fatal_error "cannot build library object '$output' from non-libtool objects"

        libobj=$output
        func_lo2o "$libobj"
        obj=$func_lo2o_result
        ;;
      *)
        libobj=
        obj=$output
        ;;
      esac

      # Delete the old objects.
      $opt_dry_run || $RM $obj $libobj

      # Objects from convenience libraries.  This assumes
      # single-version convenience libraries.  Whenever we create
      # different ones for PIC/non-PIC, this we'll have to duplicate
      # the extraction.
      reload_conv_objs=
      gentop=
      # if reload_cmds runs $LD directly, get rid of -Wl from
      # whole_archive_flag_spec and hope we can get by with turning comma
      # into space.
      case $reload_cmds in
        *\$LD[\ \$]*) wl= ;;
      esac
      if test -n "$convenience"; then
        if test -n "$whole_archive_flag_spec"; then
          eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
          test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
          reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
        else
          gentop=$output_objdir/${obj}x
          func_append generated " $gentop"

          func_extract_archives $gentop $convenience
          reload_conv_objs="$reload_objs $func_extract_archives_result"
        fi
      fi

      # If we're not building shared, we need to use non_pic_objs
      test yes = "$build_libtool_libs" || libobjs=$non_pic_objects

      # Create the old-style object.
      reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs

      output=$obj
      func_execute_cmds "$reload_cmds" 'exit $?'

      # Exit if we aren't doing a library object file.
      if test -z "$libobj"; then
        if test -n "$gentop"; then
          func_show_eval '${RM}r "$gentop"'
        fi

        exit $EXIT_SUCCESS
      fi

      test yes = "$build_libtool_libs" || {
        if test -n "$gentop"; then
          func_show_eval '${RM}r "$gentop"'
        fi

        # Create an invalid libtool object if no PIC, so that we don't
        # accidentally link it into a program.
        # $show "echo timestamp > $libobj"
        # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
        exit $EXIT_SUCCESS
      }

      if test -n "$pic_flag" || test default != "$pic_mode"; then
        # Only do commands if we really have different PIC objects.
        reload_objs="$libobjs $reload_conv_objs"
        output=$libobj
        func_execute_cmds "$reload_cmds" 'exit $?'
      fi

      if test -n "$gentop"; then
        func_show_eval '${RM}r "$gentop"'
      fi

      exit $EXIT_SUCCESS
      ;;

    prog)
      case $host in
        *cygwin*) func_stripname '' '.exe' "$output"
                  output=$func_stripname_result.exe;;
      esac
      test -n "$vinfo" && \
        func_warning "'-version-info' is ignored for programs"

      test -n "$release" && \
        func_warning "'-release' is ignored for programs"

      $preload \
        && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
        && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."

      case $host in
      *-*-rhapsody* | *-*-darwin1.[012])
        # On Rhapsody replace the C library is the System framework
        compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
        finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
        ;;
      esac

      case $host in
      *-*-darwin*)
        # Don't allow lazy linking, it breaks C++ global constructors
        # But is supposedly fixed on 10.4 or later (yay!).
        if test CXX = "$tagname"; then
          case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
            10.[0123])
              func_append compile_command " $wl-bind_at_load"
              func_append finalize_command " $wl-bind_at_load"
            ;;
          esac
        fi
        # Time to change all our "foo.ltframework" stuff back to "-framework foo"
        compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
        finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
        ;;
      esac


      # move library search paths that coincide with paths to not yet
      # installed libraries to the beginning of the library search list
      new_libs=
      for path in $notinst_path; do
        case " $new_libs " in
        *" -L$path/$objdir "*) ;;
        *)
          case " $compile_deplibs " in
          *" -L$path/$objdir "*)
            func_append new_libs " -L$path/$objdir" ;;
          esac
          ;;
        esac
      done
      for deplib in $compile_deplibs; do
        case $deplib in
        -L*)
          case " $new_libs " in
          *" $deplib "*) ;;
          *) func_append new_libs " $deplib" ;;
          esac
          ;;
        *) func_append new_libs " $deplib" ;;
        esac
      done
      compile_deplibs=$new_libs


      func_append compile_command " $compile_deplibs"
      func_append finalize_command " $finalize_deplibs"

      if test -n "$rpath$xrpath"; then
        # If the user specified any rpath flags, then add them.
        for libdir in $rpath $xrpath; do
          # This is the magic to use -rpath.
          case "$finalize_rpath " in
          *" $libdir "*) ;;
          *) func_append finalize_rpath " $libdir" ;;
          esac
        done
      fi

      # Now hardcode the library paths
      rpath=
      hardcode_libdirs=
      for libdir in $compile_rpath $finalize_rpath; do
        if test -n "$hardcode_libdir_flag_spec"; then
          if test -n "$hardcode_libdir_separator"; then
            if test -z "$hardcode_libdirs"; then
              hardcode_libdirs=$libdir
            else
              # Just accumulate the unique libdirs.
              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                ;;
              *)
                func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
                ;;
              esac
            fi
          else
            eval flag=\"$hardcode_libdir_flag_spec\"
            func_append rpath " $flag"
          fi
        elif test -n "$runpath_var"; then
          case "$perm_rpath " in
          *" $libdir "*) ;;
          *) func_append perm_rpath " $libdir" ;;
          esac
        fi
        case $host in
        *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
          testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
          case :$dllsearchpath: in
          *":$libdir:"*) ;;
          ::) dllsearchpath=$libdir;;
          *) func_append dllsearchpath ":$libdir";;
          esac
          case :$dllsearchpath: in
          *":$testbindir:"*) ;;
          ::) dllsearchpath=$testbindir;;
          *) func_append dllsearchpath ":$testbindir";;
          esac
          ;;
        esac
      done
      # Substitute the hardcoded libdirs into the rpath.
      if test -n "$hardcode_libdir_separator" &&
         test -n "$hardcode_libdirs"; then
        libdir=$hardcode_libdirs
        eval rpath=\" $hardcode_libdir_flag_spec\"
      fi
      compile_rpath=$rpath

      rpath=
      hardcode_libdirs=
      for libdir in $finalize_rpath; do
        if test -n "$hardcode_libdir_flag_spec"; then
          if test -n "$hardcode_libdir_separator"; then
            if test -z "$hardcode_libdirs"; then
              hardcode_libdirs=$libdir
            else
              # Just accumulate the unique libdirs.
              case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
              *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
                ;;
              *)
                func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
                ;;
              esac
            fi
          else
            eval flag=\"$hardcode_libdir_flag_spec\"
            func_append rpath " $flag"
          fi
        elif test -n "$runpath_var"; then
          case "$finalize_perm_rpath " in
          *" $libdir "*) ;;
          *) func_append finalize_perm_rpath " $libdir" ;;
          esac
        fi
      done
      # Substitute the hardcoded libdirs into the rpath.
      if test -n "$hardcode_libdir_separator" &&
         test -n "$hardcode_libdirs"; then
        libdir=$hardcode_libdirs
        eval rpath=\" $hardcode_libdir_flag_spec\"
      fi
      finalize_rpath=$rpath

      if test -n "$libobjs" && test yes = "$build_old_libs"; then
        # Transform all the library objects into standard objects.
        compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
        finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
      fi

      func_generate_dlsyms "$outputname" "@PROGRAM@" false

      # template prelinking step
      if test -n "$prelink_cmds"; then
        func_execute_cmds "$prelink_cmds" 'exit $?'
      fi

      wrappers_required=:
      case $host in
      *cegcc* | *mingw32ce*)
        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
        wrappers_required=false
        ;;
      *cygwin* | *mingw* )
        test yes = "$build_libtool_libs" || wrappers_required=false
        ;;
      *)
        if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
          wrappers_required=false
        fi
        ;;
      esac
      $wrappers_required || {
        # Replace the output file specification.
        compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
        link_command=$compile_command$compile_rpath

        # We have no uninstalled library dependencies, so finalize right now.
        exit_status=0
        func_show_eval "$link_command" 'exit_status=$?'

        if test -n "$postlink_cmds"; then
          func_to_tool_file "$output"
          postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
          func_execute_cmds "$postlink_cmds" 'exit $?'
        fi

        # Delete the generated files.
        if test -f "$output_objdir/${outputname}S.$objext"; then
          func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
        fi

        exit $exit_status
      }

      if test -n "$compile_shlibpath$finalize_shlibpath"; then
        compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
      fi
      if test -n "$finalize_shlibpath"; then
        finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
      fi

      compile_var=
      finalize_var=
      if test -n "$runpath_var"; then
        if test -n "$perm_rpath"; then
          # We should set the runpath_var.
          rpath=
          for dir in $perm_rpath; do
            func_append rpath "$dir:"
          done
          compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
        fi
        if test -n "$finalize_perm_rpath"; then
          # We should set the runpath_var.
          rpath=
          for dir in $finalize_perm_rpath; do
            func_append rpath "$dir:"
          done
          finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
        fi
      fi

      if test yes = "$no_install"; then
        # We don't need to create a wrapper script.
        link_command=$compile_var$compile_command$compile_rpath
        # Replace the output file specification.
        link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
        # Delete the old output file.
        $opt_dry_run || $RM $output
        # Link the executable and exit
        func_show_eval "$link_command" 'exit $?'

        if test -n "$postlink_cmds"; then
          func_to_tool_file "$output"
          postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
          func_execute_cmds "$postlink_cmds" 'exit $?'
        fi

        exit $EXIT_SUCCESS
      fi

      case $hardcode_action,$fast_install in
        relink,*)
          # Fast installation is not supported
          link_command=$compile_var$compile_command$compile_rpath
          relink_command=$finalize_var$finalize_command$finalize_rpath

          func_warning "this platform does not like uninstalled shared libraries"
          func_warning "'$output' will be relinked during installation"
          ;;
        *,yes)
          link_command=$finalize_var$compile_command$finalize_rpath
          relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
          ;;
        *,no)
          link_command=$compile_var$compile_command$compile_rpath
          relink_command=$finalize_var$finalize_command$finalize_rpath
          ;;
        *,needless)
          link_command=$finalize_var$compile_command$finalize_rpath
          relink_command=
          ;;
      esac

      # Replace the output file specification.
      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`

      # Delete the old output files.
      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname

      func_show_eval "$link_command" 'exit $?'

      if test -n "$postlink_cmds"; then
        func_to_tool_file "$output_objdir/$outputname"
        postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
        func_execute_cmds "$postlink_cmds" 'exit $?'
      fi

      # Now create the wrapper script.
      func_verbose "creating $output"

      # Quote the relink command for shipping.
      if test -n "$relink_command"; then
        # Preserve any variables that may affect compiler behavior
        for var in $variables_saved_for_relink; do
          if eval test -z \"\${$var+set}\"; then
            relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
          elif eval var_value=\$$var; test -z "$var_value"; then
            relink_command="$var=; export $var; $relink_command"
          else
            func_quote_for_eval "$var_value"
            relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
          fi
        done
        relink_command="(cd `pwd`; $relink_command)"
        relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
      fi

      # Only actually do things if not in dry run mode.
      $opt_dry_run || {
        # win32 will think the script is a binary if it has
        # a .exe suffix, so we strip it off here.
        case $output in
          *.exe) func_stripname '' '.exe' "$output"
                 output=$func_stripname_result ;;
        esac
        # test for cygwin because mv fails w/o .exe extensions
        case $host in
          *cygwin*)
            exeext=.exe
            func_stripname '' '.exe' "$outputname"
            outputname=$func_stripname_result ;;
          *) exeext= ;;
        esac
        case $host in
          *cygwin* | *mingw* )
            func_dirname_and_basename "$output" "" "."
            output_name=$func_basename_result
            output_path=$func_dirname_result
            cwrappersource=$output_path/$objdir/lt-$output_name.c
            cwrapper=$output_path/$output_name.exe
            $RM $cwrappersource $cwrapper
            trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15

            func_emit_cwrapperexe_src > $cwrappersource

            # The wrapper executable is built using the $host compiler,
            # because it contains $host paths and files. If cross-
            # compiling, it, like the target executable, must be
            # executed on the $host or under an emulation environment.
            $opt_dry_run || {
              $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
              $STRIP $cwrapper
            }

            # Now, create the wrapper script for func_source use:
            func_ltwrapper_scriptname $cwrapper
            $RM $func_ltwrapper_scriptname_result
            trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
            $opt_dry_run || {
              # note: this script will not be executed, so do not chmod.
              if test "x$build" = "x$host"; then
                $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
              else
                func_emit_wrapper no > $func_ltwrapper_scriptname_result
              fi
            }
          ;;
          * )
            $RM $output
            trap "$RM $output; exit $EXIT_FAILURE" 1 2 15

            func_emit_wrapper no > $output
            chmod +x $output
          ;;
        esac
      }
      exit $EXIT_SUCCESS
      ;;
    esac

    # See if we need to build an old-fashioned archive.
    for oldlib in $oldlibs; do

      case $build_libtool_libs in
        convenience)
          oldobjs="$libobjs_save $symfileobj"
          addlibs=$convenience
          build_libtool_libs=no
          ;;
        module)
          oldobjs=$libobjs_save
          addlibs=$old_convenience
          build_libtool_libs=no
          ;;
        *)
          oldobjs="$old_deplibs $non_pic_objects"
          $preload && test -f "$symfileobj" \
            && func_append oldobjs " $symfileobj"
          addlibs=$old_convenience
          ;;
      esac

      if test -n "$addlibs"; then
        gentop=$output_objdir/${outputname}x
        func_append generated " $gentop"

        func_extract_archives $gentop $addlibs
        func_append oldobjs " $func_extract_archives_result"
      fi

      # Do each command in the archive commands.
      if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
        cmds=$old_archive_from_new_cmds
      else

        # Add any objects from preloaded convenience libraries
        if test -n "$dlprefiles"; then
          gentop=$output_objdir/${outputname}x
          func_append generated " $gentop"

          func_extract_archives $gentop $dlprefiles
          func_append oldobjs " $func_extract_archives_result"
        fi

        # POSIX demands no paths to be encoded in archives.  We have
        # to avoid creating archives with duplicate basenames if we
        # might have to extract them afterwards, e.g., when creating a
        # static archive out of a convenience library, or when linking
        # the entirety of a libtool archive into another (currently
        # not supported by libtool).
        if (for obj in $oldobjs
            do
              func_basename "$obj"
              $ECHO "$func_basename_result"
            done | sort | sort -uc >/dev/null 2>&1); then
          :
        else
          echo "copying selected object files to avoid basename conflicts..."
          gentop=$output_objdir/${outputname}x
          func_append generated " $gentop"
          func_mkdir_p "$gentop"
          save_oldobjs=$oldobjs
          oldobjs=
          counter=1
          for obj in $save_oldobjs
          do
            func_basename "$obj"
            objbase=$func_basename_result
            case " $oldobjs " in
            " ") oldobjs=$obj ;;
            *[\ /]"$objbase "*)
              while :; do
                # Make sure we don't pick an alternate name that also
                # overlaps.
                newobj=lt$counter-$objbase
                func_arith $counter + 1
                counter=$func_arith_result
                case " $oldobjs " in
                *[\ /]"$newobj "*) ;;
                *) if test ! -f "$gentop/$newobj"; then break; fi ;;
                esac
              done
              func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
              func_append oldobjs " $gentop/$newobj"
              ;;
            *) func_append oldobjs " $obj" ;;
            esac
          done
        fi
        func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
        tool_oldlib=$func_to_tool_file_result
        eval cmds=\"$old_archive_cmds\"

        func_len " $cmds"
        len=$func_len_result
        if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
          cmds=$old_archive_cmds
        elif test -n "$archiver_list_spec"; then
          func_verbose "using command file archive linking..."
          for obj in $oldobjs
          do
            func_to_tool_file "$obj"
            $ECHO "$func_to_tool_file_result"
          done > $output_objdir/$libname.libcmd
          func_to_tool_file "$output_objdir/$libname.libcmd"
          oldobjs=" $archiver_list_spec$func_to_tool_file_result"
          cmds=$old_archive_cmds
        else
          # the command line is too long to link in one step, link in parts
          func_verbose "using piecewise archive linking..."
          save_RANLIB=$RANLIB
          RANLIB=:
          objlist=
          concat_cmds=
          save_oldobjs=$oldobjs
          oldobjs=
          # Is there a better way of finding the last object in the list?
          for obj in $save_oldobjs
          do
            last_oldobj=$obj
          done
          eval test_cmds=\"$old_archive_cmds\"
          func_len " $test_cmds"
          len0=$func_len_result
          len=$len0
          for obj in $save_oldobjs
          do
            func_len " $obj"
            func_arith $len + $func_len_result
            len=$func_arith_result
            func_append objlist " $obj"
            if test "$len" -lt "$max_cmd_len"; then
              :
            else
              # the above command should be used before it gets too long
              oldobjs=$objlist
              if test "$obj" = "$last_oldobj"; then
                RANLIB=$save_RANLIB
              fi
              test -z "$concat_cmds" || concat_cmds=$concat_cmds~
              eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
              objlist=
              len=$len0
            fi
          done
          RANLIB=$save_RANLIB
          oldobjs=$objlist
          if test -z "$oldobjs"; then
            eval cmds=\"\$concat_cmds\"
          else
            eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
          fi
        fi
      fi
      func_execute_cmds "$cmds" 'exit $?'
    done

    test -n "$generated" && \
      func_show_eval "${RM}r$generated"

    # Now create the libtool archive.
    case $output in
    *.la)
      old_library=
      test yes = "$build_old_libs" && old_library=$libname.$libext
      func_verbose "creating $output"

      # Preserve any variables that may affect compiler behavior
      for var in $variables_saved_for_relink; do
        if eval test -z \"\${$var+set}\"; then
          relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
        elif eval var_value=\$$var; test -z "$var_value"; then
          relink_command="$var=; export $var; $relink_command"
        else
          func_quote_for_eval "$var_value"
          relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
        fi
      done
      # Quote the link command for shipping.
      relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
      if test yes = "$hardcode_automatic"; then
        relink_command=
      fi

      # Only create the output if not a dry run.
      $opt_dry_run || {
        for installed in no yes; do
          if test yes = "$installed"; then
            if test -z "$install_libdir"; then
              break
            fi
            output=$output_objdir/${outputname}i
            # Replace all uninstalled libtool libraries with the installed ones
            newdependency_libs=
            for deplib in $dependency_libs; do
              case $deplib in
              *.la)
                func_basename "$deplib"
                name=$func_basename_result
                func_resolve_sysroot "$deplib"
                eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
                test -z "$libdir" && \
                  func_fatal_error "'$deplib' is not a valid libtool archive"
                func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
                ;;
              -L*)
                func_stripname -L '' "$deplib"
                func_replace_sysroot "$func_stripname_result"
                func_append newdependency_libs " -L$func_replace_sysroot_result"
                ;;
              -R*)
                func_stripname -R '' "$deplib"
                func_replace_sysroot "$func_stripname_result"
                func_append newdependency_libs " -R$func_replace_sysroot_result"
                ;;
              *) func_append newdependency_libs " $deplib" ;;
              esac
            done
            dependency_libs=$newdependency_libs
            newdlfiles=

            for lib in $dlfiles; do
              case $lib in
              *.la)
                func_basename "$lib"
                name=$func_basename_result
                eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
                test -z "$libdir" && \
                  func_fatal_error "'$lib' is not a valid libtool archive"
                func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
                ;;
              *) func_append newdlfiles " $lib" ;;
              esac
            done
            dlfiles=$newdlfiles
            newdlprefiles=
            for lib in $dlprefiles; do
              case $lib in
              *.la)
                # Only pass preopened files to the pseudo-archive (for
                # eventual linking with the app. that links it) if we
                # didn't already link the preopened objects directly into
                # the library:
                func_basename "$lib"
                name=$func_basename_result
                eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
                test -z "$libdir" && \
                  func_fatal_error "'$lib' is not a valid libtool archive"
                func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
                ;;
              esac
            done
            dlprefiles=$newdlprefiles
          else
            newdlfiles=
            for lib in $dlfiles; do
              case $lib in
                [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
                *) abs=`pwd`"/$lib" ;;
              esac
              func_append newdlfiles " $abs"
            done
            dlfiles=$newdlfiles
            newdlprefiles=
            for lib in $dlprefiles; do
              case $lib in
                [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
                *) abs=`pwd`"/$lib" ;;
              esac
              func_append newdlprefiles " $abs"
            done
            dlprefiles=$newdlprefiles
          fi
          $RM $output
          # place dlname in correct position for cygwin
          # In fact, it would be nice if we could use this code for all target
          # systems that can't hard-code library paths into their executables
          # and that have no shared library path variable independent of PATH,
          # but it turns out we can't easily determine that from inspecting
          # libtool variables, so we have to hard-code the OSs to which it
          # applies here; at the moment, that means platforms that use the PE
          # object format with DLL files.  See the long comment at the top of
          # tests/bindir.at for full details.
          tdlname=$dlname
          case $host,$output,$installed,$module,$dlname in
            *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
              # If a -bindir argument was supplied, place the dll there.
              if test -n "$bindir"; then
                func_relative_path "$install_libdir" "$bindir"
                tdlname=$func_relative_path_result/$dlname
              else
                # Otherwise fall back on heuristic.
                tdlname=../bin/$dlname
              fi
              ;;
          esac
          $ECHO > $output "\
# $outputname - a libtool library file
# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.

# The name that we can dlopen(3).
dlname='$tdlname'

# Names of this library.
library_names='$library_names'

# The name of the static archive.
old_library='$old_library'

# Linker flags that cannot go in dependency_libs.
inherited_linker_flags='$new_inherited_linker_flags'

# Libraries that this one depends upon.
dependency_libs='$dependency_libs'

# Names of additional weak libraries provided by this library
weak_library_names='$weak_libs'

# Version information for $libname.
current=$current
age=$age
revision=$revision

# Is this an already installed library?
installed=$installed

# Should we warn about portability when linking against -modules?
shouldnotlink=$module

# Files to dlopen/dlpreopen
dlopen='$dlfiles'
dlpreopen='$dlprefiles'

# Directory that this library needs to be installed in:
libdir='$install_libdir'"
          if test no,yes = "$installed,$need_relink"; then
            $ECHO >> $output "\
relink_command=\"$relink_command\""
          fi
        done
      }

      # Do a symbolic link so that the libtool archive can be found in
      # LD_LIBRARY_PATH before the program is installed.
      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
      ;;
    esac
    exit $EXIT_SUCCESS
}

if test link = "$opt_mode" || test relink = "$opt_mode"; then
  func_mode_link ${1+"$@"}
fi


# func_mode_uninstall arg...
func_mode_uninstall ()
{
    $debug_cmd

    RM=$nonopt
    files=
    rmforce=false
    exit_status=0

    # This variable tells wrapper scripts just to set variables rather
    # than running their programs.
    libtool_install_magic=$magic

    for arg
    do
      case $arg in
      -f) func_append RM " $arg"; rmforce=: ;;
      -*) func_append RM " $arg" ;;
      *) func_append files " $arg" ;;
      esac
    done

    test -z "$RM" && \
      func_fatal_help "you must specify an RM program"

    rmdirs=

    for file in $files; do
      func_dirname "$file" "" "."
      dir=$func_dirname_result
      if test . = "$dir"; then
        odir=$objdir
      else
        odir=$dir/$objdir
      fi
      func_basename "$file"
      name=$func_basename_result
      test uninstall = "$opt_mode" && odir=$dir

      # Remember odir for removal later, being careful to avoid duplicates
      if test clean = "$opt_mode"; then
        case " $rmdirs " in
          *" $odir "*) ;;
          *) func_append rmdirs " $odir" ;;
        esac
      fi

      # Don't error if the file doesn't exist and rm -f was used.
      if { test -L "$file"; } >/dev/null 2>&1 ||
         { test -h "$file"; } >/dev/null 2>&1 ||
         test -f "$file"; then
        :
      elif test -d "$file"; then
        exit_status=1
        continue
      elif $rmforce; then
        continue
      fi

      rmfiles=$file

      case $name in
      *.la)
        # Possibly a libtool archive, so verify it.
        if func_lalib_p "$file"; then
          func_source $dir/$name

          # Delete the libtool libraries and symlinks.
          for n in $library_names; do
            func_append rmfiles " $odir/$n"
          done
          test -n "$old_library" && func_append rmfiles " $odir/$old_library"

          case $opt_mode in
          clean)
            case " $library_names " in
            *" $dlname "*) ;;
            *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
            esac
            test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
            ;;
          uninstall)
            if test -n "$library_names"; then
              # Do each command in the postuninstall commands.
              func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
            fi

            if test -n "$old_library"; then
              # Do each command in the old_postuninstall commands.
              func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
            fi
            # FIXME: should reinstall the best remaining shared library.
            ;;
          esac
        fi
        ;;

      *.lo)
        # Possibly a libtool object, so verify it.
        if func_lalib_p "$file"; then

          # Read the .lo file
          func_source $dir/$name

          # Add PIC object to the list of files to remove.
          if test -n "$pic_object" && test none != "$pic_object"; then
            func_append rmfiles " $dir/$pic_object"
          fi

          # Add non-PIC object to the list of files to remove.
          if test -n "$non_pic_object" && test none != "$non_pic_object"; then
            func_append rmfiles " $dir/$non_pic_object"
          fi
        fi
        ;;

      *)
        if test clean = "$opt_mode"; then
          noexename=$name
          case $file in
          *.exe)
            func_stripname '' '.exe' "$file"
            file=$func_stripname_result
            func_stripname '' '.exe' "$name"
            noexename=$func_stripname_result
            # $file with .exe has already been added to rmfiles,
            # add $file without .exe
            func_append rmfiles " $file"
            ;;
          esac
          # Do a test to see if this is a libtool program.
          if func_ltwrapper_p "$file"; then
            if func_ltwrapper_executable_p "$file"; then
              func_ltwrapper_scriptname "$file"
              relink_command=
              func_source $func_ltwrapper_scriptname_result
              func_append rmfiles " $func_ltwrapper_scriptname_result"
            else
              relink_command=
              func_source $dir/$noexename
            fi

            # note $name still contains .exe if it was in $file originally
            # as does the version of $file that was added into $rmfiles
            func_append rmfiles " $odir/$name $odir/${name}S.$objext"
            if test yes = "$fast_install" && test -n "$relink_command"; then
              func_append rmfiles " $odir/lt-$name"
            fi
            if test "X$noexename" != "X$name"; then
              func_append rmfiles " $odir/lt-$noexename.c"
            fi
          fi
        fi
        ;;
      esac
      func_show_eval "$RM $rmfiles" 'exit_status=1'
    done

    # Try to remove the $objdir's in the directories where we deleted files
    for dir in $rmdirs; do
      if test -d "$dir"; then
        func_show_eval "rmdir $dir >/dev/null 2>&1"
      fi
    done

    exit $exit_status
}

if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
  func_mode_uninstall ${1+"$@"}
fi

test -z "$opt_mode" && {
  help=$generic_help
  func_fatal_help "you must specify a MODE"
}

test -z "$exec_cmd" && \
  func_fatal_help "invalid operation mode '$opt_mode'"

if test -n "$exec_cmd"; then
  eval exec "$exec_cmd"
  exit $EXIT_FAILURE
fi

exit $exit_status


# The TAGs below are defined such that we never get into a situation
# where we disable both kinds of libraries.  Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
# them.  This is particularly important on AIX, because we don't
# support having both static and shared libraries enabled at the same
# time on that platform, so we default to a shared-only configuration.
# If a disable-shared tag is given, we'll fallback to a static-only
# configuration.  But we'll never go from static-only to shared-only.

# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
build_libtool_libs=no
build_old_libs=yes
# ### END LIBTOOL TAG CONFIG: disable-shared

# ### BEGIN LIBTOOL TAG CONFIG: disable-static
build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
# ### END LIBTOOL TAG CONFIG: disable-static

# Local Variables:
# mode:shell-script
# sh-indentation:2
# End: