libjaylink/swo.c

   1 /*
   2  * This file is part of the libjaylink project.
   3  *
   4  * Copyright (C) 2015 Marc Schink <jaylink-dev@marcschink.de>
   5  *
   6  * This program is free software: you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation, either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  18  */
  19
  20 #include <stdint.h>
  21 #include <stdbool.h>
  22
  23 #include "libjaylink.h"
  24 #include "libjaylink-internal.h"
  25
  26 /**
  27  * @file
  28  *
  29  * Serial Wire Output (SWO) functions.
  30  */
  31
  32 /** @cond PRIVATE */
  33 #define CMD_SWO                 0xeb
  34
  35 #define SWO_CMD_START           0x64
  36 #define SWO_CMD_STOP            0x65
  37 #define SWO_CMD_READ            0x66
  38 #define SWO_CMD_GET_SPEEDS      0x6e
  39
  40 #define SWO_PARAM_MODE          0x01
  41 #define SWO_PARAM_BAUDRATE      0x02
  42 #define SWO_PARAM_READ_SIZE     0x03
  43 #define SWO_PARAM_BUFFER_SIZE   0x04
  44
  45 #define SWO_ERR                 0x80000000
  46 /** @endcond */
  47
  48 /**
  49  * Start SWO capture.
  50  *
  51  * @note This function must be used only if the device has the
  52  *       #JAYLINK_DEV_CAP_SWO capability.
  53  *
  54  * @param[in,out] devh Device handle.
  55  * @param[in] mode Mode to capture data with.
  56  * @param[in] baudrate Baudrate to capture data in bit per second.
  57  * @param[in] size Device internal buffer size in bytes to use for capturing.
  58  *
  59  * @retval JAYLINK_OK Success.
  60  * @retval JAYLINK_ERR_ARG Invalid arguments.
  61  * @retval JAYLINK_ERR_TIMEOUT A timeout occurred.
  62  * @retval JAYLINK_ERR_IO Input/output error.
  63  * @retval JAYLINK_ERR_DEV Unspecified device error.
  64  * @retval JAYLINK_ERR Other error conditions.
  65  *
  66  * @see jaylink_swo_get_speeds()
  67  * @see jaylink_get_free_memory()
  68  *
  69  * @since 0.1.0
  70  */
  71 JAYLINK_API int jaylink_swo_start(struct jaylink_device_handle *devh,
  72                 enum jaylink_swo_mode mode, uint32_t baudrate, uint32_t size)
  73 {
  74         int ret;
  75         struct jaylink_context *ctx;
  76         uint8_t buf[32];
  77         uint32_t status;
  78
  79         if (!devh || !baudrate || !size)
  80                 return JAYLINK_ERR_ARG;
  81
  82         if (mode != JAYLINK_SWO_MODE_UART)
  83                 return JAYLINK_ERR_ARG;
  84
  85         ctx = devh->dev->ctx;
  86         ret = transport_start_write_read(devh, 21, 4, true);
  87
  88         if (ret != JAYLINK_OK) {
  89                 log_err(ctx, "transport_start_write_read() failed: %s.",
  90                         jaylink_strerror(ret));
  91                 return ret;
  92         }
  93
  94         buf[0] = CMD_SWO;
  95         buf[1] = SWO_CMD_START;
  96
  97         buf[2] = 0x04;
  98         buf[3] = SWO_PARAM_MODE;
  99         buffer_set_u32(buf, mode, 4);
 100
 101         buf[8] = 0x04;
 102         buf[9] = SWO_PARAM_BAUDRATE;
 103         buffer_set_u32(buf, baudrate, 10);
 104
 105         buf[14] = 0x04;
 106         buf[15] = SWO_PARAM_BUFFER_SIZE;
 107         buffer_set_u32(buf, size, 16);
 108
 109         buf[20] = 0x00;
 110
 111         ret = transport_write(devh, buf, 21);
 112
 113         if (ret != JAYLINK_OK) {
 114                 log_err(ctx, "transport_write() failed: %s.",
 115                         jaylink_strerror(ret));
 116                 return ret;
 117         }
 118
 119         ret = transport_read(devh, buf, 4);
 120
 121         if (ret != JAYLINK_OK) {
 122                 log_err(ctx, "transport_read() failed: %s.",
 123                         jaylink_strerror(ret));
 124                 return ret;
 125         }
 126
 127         status = buffer_get_u32(buf, 0);
 128
 129         if (status > 0) {
 130                 log_err(ctx, "Failed to start capture: 0x%x.", status);
 131                 return JAYLINK_ERR_DEV;
 132         }
 133
 134         return JAYLINK_OK;
 135 }
 136
 137 /**
 138  * Stop SWO capture.
 139  *
 140  * @note This function must be used only if the device has the
 141  *       #JAYLINK_DEV_CAP_SWO capability.
 142  *
 143  * @param[in,out] devh Device handle.
 144  *
 145  * @retval JAYLINK_OK Success.
 146  * @retval JAYLINK_ERR_ARG Invalid arguments.
 147  * @retval JAYLINK_ERR_TIMEOUT A timeout occurred.
 148  * @retval JAYLINK_ERR_IO Input/output error.
 149  * @retval JAYLINK_ERR_DEV Unspecified device error.
 150  * @retval JAYLINK_ERR Other error conditions.
 151  *
 152  * @see jaylink_swo_start()
 153  *
 154  * @since 0.1.0
 155  */
 156 JAYLINK_API int jaylink_swo_stop(struct jaylink_device_handle *devh)
 157 {
 158         int ret;
 159         struct jaylink_context *ctx;
 160         uint8_t buf[4];
 161         uint32_t status;
 162
 163         if (!devh)
 164                 return JAYLINK_ERR_ARG;
 165
 166         ctx = devh->dev->ctx;
 167         ret = transport_start_write_read(devh, 3, 4, true);
 168
 169         if (ret != JAYLINK_OK) {
 170                 log_err(ctx, "transport_start_write_read() failed: %s.",
 171                         jaylink_strerror(ret));
 172                 return ret;
 173         }
 174
 175         buf[0] = CMD_SWO;
 176         buf[1] = SWO_CMD_STOP;
 177         buf[2] = 0x00;
 178
 179         ret = transport_write(devh, buf, 3);
 180
 181         if (ret != JAYLINK_OK) {
 182                 log_err(ctx, "transport_write() failed: %s.",
 183                         jaylink_strerror(ret));
 184                 return ret;
 185         }
 186
 187         ret = transport_read(devh, buf, 4);
 188
 189         if (ret != JAYLINK_OK) {
 190                 log_err(ctx, "transport_read() failed: %s.",
 191                         jaylink_strerror(ret));
 192                 return ret;
 193         }
 194
 195         status = buffer_get_u32(buf, 0);
 196
 197         if (status > 0) {
 198                 log_err(ctx, "Failed to stop capture: 0x%x.", status);
 199                 return JAYLINK_ERR_DEV;
 200         }
 201
 202         return JAYLINK_OK;
 203 }
 204
 205 /**
 206  * Read SWO trace data.
 207  *
 208  * @note This function must be used only if the device has the
 209  *       #JAYLINK_DEV_CAP_SWO capability.
 210  *
 211  * @param[in,out] devh Device handle.
 212  * @param[out] buffer Buffer to store trace data on success. Its content is
 213  *                    undefined on failure.
 214  * @param[in,out] length Maximum number of bytes to read. On success, the value
 215  *                       gets updated with the actual number of bytes read. The
 216  *                       value is undefined on failure.
 217  *
 218  * @retval JAYLINK_OK Success.
 219  * @retval JAYLINK_ERR_ARG Invalid arguments.
 220  * @retval JAYLINK_ERR_TIMEOUT A timeout occurred.
 221  * @retval JAYLINK_ERR_PROTO Protocol violation.
 222  * @retval JAYLINK_ERR_IO Input/output error.
 223  * @retval JAYLINK_ERR_DEV Unspecified device error.
 224  * @retval JAYLINK_ERR Other error conditions.
 225  *
 226  * @see jaylink_swo_start()
 227  *
 228  * @since 0.1.0
 229  */
 230 JAYLINK_API int jaylink_swo_read(struct jaylink_device_handle *devh,
 231                 uint8_t *buffer, uint32_t *length)
 232 {
 233         int ret;
 234         struct jaylink_context *ctx;
 235         uint8_t buf[32];
 236         uint32_t status;
 237         uint32_t tmp;
 238
 239         if (!devh || !buffer || !length)
 240                 return JAYLINK_ERR_ARG;
 241
 242         ctx = devh->dev->ctx;
 243         ret = transport_start_write_read(devh, 9, 8, true);
 244
 245         if (ret != JAYLINK_OK) {
 246                 log_err(ctx, "transport_start_write_read() failed: %s.",
 247                         jaylink_strerror(ret));
 248                 return ret;
 249         }
 250
 251         buf[0] = CMD_SWO;
 252         buf[1] = SWO_CMD_READ;
 253
 254         buf[2] = 0x04;
 255         buf[3] = SWO_PARAM_READ_SIZE;
 256         buffer_set_u32(buf, *length, 4);
 257
 258         buf[8] = 0x00;
 259
 260         ret = transport_write(devh, buf, 9);
 261
 262         if (ret != JAYLINK_OK) {
 263                 log_err(ctx, "transport_write() failed: %s.",
 264                         jaylink_strerror(ret));
 265                 return ret;
 266         }
 267
 268         ret = transport_read(devh, buf, 8);
 269
 270         if (ret != JAYLINK_OK) {
 271                 log_err(ctx, "transport_read() failed: %s.",
 272                         jaylink_strerror(ret));
 273                 return ret;
 274         }
 275
 276         status = buffer_get_u32(buf, 0);
 277         tmp = buffer_get_u32(buf, 4);
 278
 279         if (tmp > *length) {
 280                 log_err(ctx, "Received %u bytes but only %u bytes were "
 281                         "requested.", tmp, *length);
 282                 return JAYLINK_ERR_PROTO;
 283         }
 284
 285         *length = tmp;
 286
 287         if (tmp > 0) {
 288                 ret = transport_start_read(devh, tmp);
 289
 290                 if (ret != JAYLINK_OK) {
 291                         log_err(ctx, "transport_start_read() failed: %s.",
 292                                 jaylink_strerror(ret));
 293                         return ret;
 294                 }
 295
 296                 ret = transport_read(devh, buffer, tmp);
 297
 298                 if (ret != JAYLINK_OK) {
 299                         log_err(ctx, "transport_read() failed: %s.",
 300                                 jaylink_strerror(ret));
 301                         return ret;
 302                 }
 303         }
 304
 305         if (status > 0) {
 306                 log_err(ctx, "Failed to read data: 0x%x.", status);
 307                 return JAYLINK_ERR_DEV;
 308         }
 309
 310         return JAYLINK_OK;
 311 }
 312
 313 /**
 314  * Retrieve SWO speeds.
 315
 316  * The speeds are calculated as follows:
 317  *
 318  * @par
 319  * <tt>speeds = @a freq / n</tt> with <tt>n >= @a min_div</tt> and
 320  * <tt>n <= @a max_div</tt>, where @p n is an integer
 321  *
 322  * Assuming, for example, a base frequency @a freq of 4500 kHz, a minimum
 323  * divider @a min_div of 1 and a maximum divider @a max_div of 8 then the
 324  * highest possible SWO speed is 4500 kHz / 1 = 4500 kHz. The next highest
 325  * speed is 2250 kHz for a divider of 2, and so on. Accordingly, the lowest
 326  * possible speed is 4500 kHz / 8 = 562.5 kHz.
 327  *
 328  * @note This function must be used only if the device has the
 329  *       #JAYLINK_DEV_CAP_SWO capability.
 330  *
 331  * @param[in,out] devh Device handle.
 332  * @param[in] mode Capture mode to retrieve speeds for.
 333  * @param[out] speed Speed information on success, and undefined on failure.
 334  *
 335  * @retval JAYLINK_OK Success.
 336  * @retval JAYLINK_ERR_ARG Invalid arguments.
 337  * @retval JAYLINK_ERR_TIMEOUT A timeout occurred.
 338  * @retval JAYLINK_ERR_PROTO Protocol violation.
 339  * @retval JAYLINK_ERR_IO Input/output error.
 340  * @retval JAYLINK_ERR_DEV Unspecified device error.
 341  * @retval JAYLINK_ERR Other error conditions.
 342  *
 343  * @since 0.1.0
 344  */
 345 JAYLINK_API int jaylink_swo_get_speeds(struct jaylink_device_handle *devh,
 346                 enum jaylink_swo_mode mode, struct jaylink_swo_speed *speed)
 347 {
 348         int ret;
 349         struct jaylink_context *ctx;
 350         uint8_t buf[24];
 351         uint32_t tmp;
 352         uint32_t length;
 353
 354         if (!devh || !speed)
 355                 return JAYLINK_ERR_ARG;
 356
 357         if (mode != JAYLINK_SWO_MODE_UART)
 358                 return JAYLINK_ERR_ARG;
 359
 360         ctx = devh->dev->ctx;
 361         ret = transport_start_write_read(devh, 9, 4, true);
 362
 363         if (ret != JAYLINK_OK) {
 364                 log_err(ctx, "transport_start_write_read() failed: %s.",
 365                         jaylink_strerror(ret));
 366                 return ret;
 367         }
 368
 369         buf[0] = CMD_SWO;
 370         buf[1] = SWO_CMD_GET_SPEEDS;
 371
 372         buf[2] = 0x04;
 373         buf[3] = SWO_PARAM_MODE;
 374         buffer_set_u32(buf, mode, 4);
 375
 376         buf[8] = 0x00;
 377
 378         ret = transport_write(devh, buf, 9);
 379
 380         if (ret != JAYLINK_OK) {
 381                 log_err(ctx, "transport_write() failed: %s.",
 382                         jaylink_strerror(ret));
 383                 return ret;
 384         }
 385
 386         ret = transport_read(devh, buf, 4);
 387
 388         if (ret != JAYLINK_OK) {
 389                 log_err(ctx, "transport_read() failed: %s.",
 390                         jaylink_strerror(ret));
 391                 return ret;
 392         }
 393
 394         tmp = buffer_get_u32(buf, 0);
 395
 396         if (tmp & SWO_ERR) {
 397                 log_err(ctx, "Failed to retrieve speed information: 0x%x.",
 398                         tmp);
 399                 return JAYLINK_ERR_DEV;
 400         }
 401
 402         length = tmp;
 403
 404         if (length != 28) {
 405                 log_err(ctx, "Unexpected number of bytes received: %u.",
 406                         length);
 407                 return JAYLINK_ERR_PROTO;
 408         }
 409
 410         length = length - 4;
 411         ret = transport_start_read(devh, length);
 412
 413         if (ret != JAYLINK_OK) {
 414                 log_err(ctx, "transport_start_read() failed: %s.",
 415                         jaylink_strerror(ret));
 416                 return ret;
 417         }
 418
 419         ret = transport_read(devh, buf, length);
 420
 421         if (ret != JAYLINK_OK) {
 422                 log_err(ctx, "transport_read() failed: %s.",
 423                         jaylink_strerror(ret));
 424                 return ret;
 425         }
 426
 427         speed->freq = buffer_get_u32(buf, 4);
 428         speed->min_div = buffer_get_u32(buf, 8);
 429
 430         if (!speed->min_div) {
 431                 log_err(ctx, "Minimum frequency divider is zero.");
 432                 return JAYLINK_ERR_PROTO;
 433         }
 434
 435         speed->max_div = buffer_get_u32(buf, 12);
 436
 437         if (speed->max_div < speed->min_div) {
 438                 log_err(ctx, "Maximum frequency divider is less than minimum "
 439                         "frequency divider.");
 440                 return JAYLINK_ERR_PROTO;
 441         }
 442
 443         speed->min_prescaler = buffer_get_u32(buf, 16);
 444         speed->max_prescaler = buffer_get_u32(buf, 20);
 445
 446         if (speed->max_prescaler < speed->min_prescaler) {
 447                 log_err(ctx, "Maximum prescaler is less than minimum "
 448                         "prescaler.");
 449                 return JAYLINK_ERR_PROTO;
 450         }
 451
 452         return JAYLINK_OK;
 453 }