2 * libpri: An implementation of Primary Rate ISDN
4 * Written by Mark Spencer <markster@digium.com>
6 * Copyright (C) 2001, Digium, Inc.
8 * Copyright (C) 2003-2006 Junghanns.NET GmbH
9 * Klaus-Peter Junghanns <kpj@junghanns.net>
13 * See http://www.asterisk.org for more information about
14 * the Asterisk project. Please do not directly contact
15 * any of the maintainers of this project for assistance;
16 * the project provides a web site, mailing lists and IRC
17 * channels for your use.
19 * This program is free software, distributed under the terms of
20 * the GNU General Public License Version 2 as published by the
21 * Free Software Foundation. See the LICENSE file included with
22 * this program for more details.
29 #define PRI_NETWORK 1 /* PTP modes, default for PRI */
31 #define BRI_NETWORK_PTMP 3 /* PTMP modes, default for BRI */
32 #define BRI_CPE_PTMP 4
33 #define BRI_NETWORK 5 /* PTP modes */
37 #define PRI_DEBUG_Q921_RAW (1 << 0) /* Show raw HDLC frames */
38 #define PRI_DEBUG_Q921_DUMP (1 << 1) /* Show each interpreted Q.921 frame */
39 #define PRI_DEBUG_Q921_STATE (1 << 2) /* Debug state machine changes */
40 #define PRI_DEBUG_CONFIG (1 << 3) /* Display error events on stdout */
41 #define PRI_DEBUG_Q931_DUMP (1 << 5) /* Show interpreted Q.931 frames */
42 #define PRI_DEBUG_Q931_STATE (1 << 6) /* Debug Q.931 state machine changes */
43 #define PRI_DEBUG_Q931_ANOMALY (1 << 7) /* Show unexpected events */
44 #define PRI_DEBUG_APDU (1 << 8) /* Debug of APDU components such as ROSE */
45 #define PRI_DEBUG_AOC (1 << 9) /* Debug of Advice of Charge ROSE Messages */
47 #define PRI_DEBUG_ALL (0xffff) /* Everything */
50 #define PRI_SWITCH_UNKNOWN 0
51 #define PRI_SWITCH_NI2 1 /* National ISDN 2 */
52 #define PRI_SWITCH_DMS100 2 /* DMS 100 */
53 #define PRI_SWITCH_LUCENT5E 3 /* Lucent 5E */
54 #define PRI_SWITCH_ATT4ESS 4 /* AT&T 4ESS */
55 #define PRI_SWITCH_EUROISDN_E1 5 /* Standard EuroISDN (CTR4, ETSI 300-102) */
56 #define PRI_SWITCH_EUROISDN_T1 6 /* T1 EuroISDN variant (ETSI 300-102) */
57 #define PRI_SWITCH_NI1 7 /* National ISDN 1 */
58 #define PRI_SWITCH_GR303_EOC 8 /* GR-303 Embedded Operations Channel */
59 #define PRI_SWITCH_GR303_TMC 9 /* GR-303 Timeslot Management Channel */
60 #define PRI_SWITCH_QSIG 10 /* QSIG Switch */
61 /* Switchtypes 11 - 20 are reserved for internal use */
64 /* PRI D-Channel Events */
65 #define PRI_EVENT_DCHAN_UP 1 /* D-channel is up */
66 #define PRI_EVENT_DCHAN_DOWN 2 /* D-channel is down */
67 #define PRI_EVENT_RESTART 3 /* B-channel is restarted */
68 #define PRI_EVENT_CONFIG_ERR 4 /* Configuration Error Detected */
69 #define PRI_EVENT_RING 5 /* Incoming call */
70 #define PRI_EVENT_HANGUP 6 /* Call got hung up */
71 #define PRI_EVENT_RINGING 7 /* Call is ringing (alerting) */
72 #define PRI_EVENT_ANSWER 8 /* Call has been answered */
73 #define PRI_EVENT_HANGUP_ACK 9 /* Call hangup has been acknowledged */
74 #define PRI_EVENT_RESTART_ACK 10 /* Restart complete on a given channel */
75 #define PRI_EVENT_FACNAME 11 /* Caller*ID Name received on Facility */
76 #define PRI_EVENT_INFO_RECEIVED 12 /* Additional info (keypad) received */
77 #define PRI_EVENT_PROCEEDING 13 /* When we get CALL_PROCEEDING or PROGRESS */
78 #define PRI_EVENT_SETUP_ACK 14 /* When we get SETUP_ACKNOWLEDGE */
79 #define PRI_EVENT_HANGUP_REQ 15 /* Requesting the higher layer to hangup */
80 #define PRI_EVENT_NOTIFY 16 /* Notification received */
81 #define PRI_EVENT_PROGRESS 17 /* When we get CALL_PROCEEDING or PROGRESS */
82 #define PRI_EVENT_KEYPAD_DIGIT 18 /* When we receive during ACTIVE state */
83 #define PRI_EVENT_HOLD_REQ 19 /* R */
84 #define PRI_EVENT_RETRIEVE_REQ 20
85 #define PRI_EVENT_SUSPEND_REQ 21 /* park */
86 #define PRI_EVENT_RESUME_REQ 22 /* unpark */
87 #define PRI_EVENT_DISPLAY_RECEIVED 23
88 #define PRI_EVENT_FACILITY 24 /* Facility */
91 #define PRI_STATE_DOWN 0
92 #define PRI_STATE_UP 1
94 #define PRI_PROGRESS_MASK
96 /* Progress indicator values */
97 #define PRI_PROG_CALL_NOT_E2E_ISDN (1 << 0)
98 #define PRI_PROG_CALLED_NOT_ISDN (1 << 1)
99 #define PRI_PROG_CALLER_NOT_ISDN (1 << 2)
100 #define PRI_PROG_INBAND_AVAILABLE (1 << 3)
101 #define PRI_PROG_DELAY_AT_INTERF (1 << 4)
102 #define PRI_PROG_INTERWORKING_WITH_PUBLIC (1 << 5)
103 #define PRI_PROG_INTERWORKING_NO_RELEASE (1 << 6)
104 #define PRI_PROG_INTERWORKING_NO_RELEASE_PRE_ANSWER (1 << 7)
105 #define PRI_PROG_INTERWORKING_NO_RELEASE_POST_ANSWER (1 << 8)
106 #define PRI_PROG_CALLER_RETURNED_TO_ISDN (1 << 9)
108 /* Numbering plan identifier */
109 #define PRI_NPI_UNKNOWN 0x0
110 #define PRI_NPI_E163_E164 0x1
111 #define PRI_NPI_X121 0x3
112 #define PRI_NPI_F69 0x4
113 #define PRI_NPI_NATIONAL 0x8
114 #define PRI_NPI_PRIVATE 0x9
115 #define PRI_NPI_RESERVED 0xF
118 #define PRI_TON_UNKNOWN 0x0
119 #define PRI_TON_INTERNATIONAL 0x1
120 #define PRI_TON_NATIONAL 0x2
121 #define PRI_TON_NET_SPECIFIC 0x3
122 #define PRI_TON_SUBSCRIBER 0x4
123 #define PRI_TON_ABBREVIATED 0x6
124 #define PRI_TON_RESERVED 0x7
126 /* Redirection reasons */
127 #define PRI_REDIR_UNKNOWN 0x0
128 #define PRI_REDIR_FORWARD_ON_BUSY 0x1
129 #define PRI_REDIR_FORWARD_ON_NO_REPLY 0x2
130 #define PRI_REDIR_DEFLECTION 0x3
131 #define PRI_REDIR_DTE_OUT_OF_ORDER 0x9
132 #define PRI_REDIR_FORWARDED_BY_DTE 0xA
133 #define PRI_REDIR_UNCONDITIONAL 0xF
136 #define PRI_INTERNATIONAL_ISDN 0x11
137 #define PRI_NATIONAL_ISDN 0x21
138 #define PRI_LOCAL_ISDN 0x41
139 #define PRI_PRIVATE 0x49
140 #define PRI_UNKNOWN 0x0
143 #define PRES_ALLOWED_USER_NUMBER_NOT_SCREENED 0x00
144 #define PRES_ALLOWED_USER_NUMBER_PASSED_SCREEN 0x01
145 #define PRES_ALLOWED_USER_NUMBER_FAILED_SCREEN 0x02
146 #define PRES_ALLOWED_NETWORK_NUMBER 0x03
147 #define PRES_PROHIB_USER_NUMBER_NOT_SCREENED 0x20
148 #define PRES_PROHIB_USER_NUMBER_PASSED_SCREEN 0x21
149 #define PRES_PROHIB_USER_NUMBER_FAILED_SCREEN 0x22
150 #define PRES_PROHIB_NETWORK_NUMBER 0x23
151 #define PRES_NUMBER_NOT_AVAILABLE 0x43
153 /* Causes for disconnection */
154 #define PRI_CAUSE_UNALLOCATED 1
155 #define PRI_CAUSE_NO_ROUTE_TRANSIT_NET 2 /* !Q.SIG */
156 #define PRI_CAUSE_NO_ROUTE_DESTINATION 3
157 #define PRI_CAUSE_CHANNEL_UNACCEPTABLE 6
158 #define PRI_CAUSE_CALL_AWARDED_DELIVERED 7 /* !Q.SIG */
159 #define PRI_CAUSE_NORMAL_CLEARING 16
160 #define PRI_CAUSE_USER_BUSY 17
161 #define PRI_CAUSE_NO_USER_RESPONSE 18
162 #define PRI_CAUSE_NO_ANSWER 19
163 #define PRI_CAUSE_CALL_REJECTED 21
164 #define PRI_CAUSE_NUMBER_CHANGED 22
165 #define PRI_CAUSE_DESTINATION_OUT_OF_ORDER 27
166 #define PRI_CAUSE_INVALID_NUMBER_FORMAT 28
167 #define PRI_CAUSE_FACILITY_REJECTED 29 /* !Q.SIG */
168 #define PRI_CAUSE_RESPONSE_TO_STATUS_ENQUIRY 30
169 #define PRI_CAUSE_NORMAL_UNSPECIFIED 31
170 #define PRI_CAUSE_NORMAL_CIRCUIT_CONGESTION 34
171 #define PRI_CAUSE_NETWORK_OUT_OF_ORDER 38 /* !Q.SIG */
172 #define PRI_CAUSE_NORMAL_TEMPORARY_FAILURE 41
173 #define PRI_CAUSE_SWITCH_CONGESTION 42 /* !Q.SIG */
174 #define PRI_CAUSE_ACCESS_INFO_DISCARDED 43 /* !Q.SIG */
175 #define PRI_CAUSE_REQUESTED_CHAN_UNAVAIL 44
176 #define PRI_CAUSE_PRE_EMPTED 45 /* !Q.SIG */
177 #define PRI_CAUSE_FACILITY_NOT_SUBSCRIBED 50 /* !Q.SIG */
178 #define PRI_CAUSE_OUTGOING_CALL_BARRED 52 /* !Q.SIG */
179 #define PRI_CAUSE_INCOMING_CALL_BARRED 54 /* !Q.SIG */
180 #define PRI_CAUSE_BEARERCAPABILITY_NOTAUTH 57
181 #define PRI_CAUSE_BEARERCAPABILITY_NOTAVAIL 58
182 #define PRI_CAUSE_SERVICEOROPTION_NOTAVAIL 63 /* Q.SIG */
183 #define PRI_CAUSE_BEARERCAPABILITY_NOTIMPL 65
184 #define PRI_CAUSE_CHAN_NOT_IMPLEMENTED 66 /* !Q.SIG */
185 #define PRI_CAUSE_FACILITY_NOT_IMPLEMENTED 69 /* !Q.SIG */
186 #define PRI_CAUSE_INVALID_CALL_REFERENCE 81
187 #define PRI_CAUSE_IDENTIFIED_CHANNEL_NOTEXIST 82 /* Q.SIG */
188 #define PRI_CAUSE_INCOMPATIBLE_DESTINATION 88
189 #define PRI_CAUSE_INVALID_MSG_UNSPECIFIED 95 /* !Q.SIG */
190 #define PRI_CAUSE_MANDATORY_IE_MISSING 96
191 #define PRI_CAUSE_MESSAGE_TYPE_NONEXIST 97
192 #define PRI_CAUSE_WRONG_MESSAGE 98
193 #define PRI_CAUSE_IE_NONEXIST 99
194 #define PRI_CAUSE_INVALID_IE_CONTENTS 100
195 #define PRI_CAUSE_WRONG_CALL_STATE 101
196 #define PRI_CAUSE_RECOVERY_ON_TIMER_EXPIRE 102
197 #define PRI_CAUSE_MANDATORY_IE_LENGTH_ERROR 103 /* !Q.SIG */
198 #define PRI_CAUSE_PROTOCOL_ERROR 111
199 #define PRI_CAUSE_INTERWORKING 127 /* !Q.SIG */
201 /* Transmit capabilities */
202 #define PRI_TRANS_CAP_SPEECH 0x0
203 #define PRI_TRANS_CAP_DIGITAL 0x08
204 #define PRI_TRANS_CAP_RESTRICTED_DIGITAL 0x09
205 #define PRI_TRANS_CAP_3_1K_AUDIO 0x10
206 #define PRI_TRANS_CAP_7K_AUDIO 0x11 /* Depriciated ITU Q.931 (05/1998)*/
207 #define PRI_TRANS_CAP_DIGITAL_W_TONES 0x11
208 #define PRI_TRANS_CAP_VIDEO 0x18
210 #define PRI_LAYER_1_ITU_RATE_ADAPT 0x21
211 #define PRI_LAYER_1_ULAW 0x22
212 #define PRI_LAYER_1_ALAW 0x23
213 #define PRI_LAYER_1_G721 0x24
214 #define PRI_LAYER_1_G722_G725 0x25
215 #define PRI_LAYER_1_H223_H245 0x26
216 #define PRI_LAYER_1_NON_ITU_ADAPT 0x27
217 #define PRI_LAYER_1_V120_RATE_ADAPT 0x28
218 #define PRI_LAYER_1_X31_RATE_ADAPT 0x29
221 /* Intermediate rates for V.110 */
222 #define PRI_INT_RATE_8K 1
223 #define PRI_INT_RATE_16K 2
224 #define PRI_INT_RATE_32K 3
227 /* Rate adaption for bottom 5 bits of rateadaption */
228 #define PRI_RATE_USER_RATE_MASK 0x1F
229 #define PRI_RATE_ADAPT_UNSPEC 0x00
230 #define PRI_RATE_ADAPT_0K6 0x01
231 #define PRI_RATE_ADAPT_1K2 0x02
232 #define PRI_RATE_ADAPT_2K4 0x03
233 #define PRI_RATE_ADAPT_3K6 0x04
234 #define PRI_RATE_ADAPT_4K8 0x05
235 #define PRI_RATE_ADAPT_7K2 0x06
236 #define PRI_RATE_ADAPT_8K 0x07
237 #define PRI_RATE_ADAPT_9K6 0x08
238 #define PRI_RATE_ADAPT_14K4 0x09
239 #define PRI_RATE_ADAPT_16K 0x0A
240 #define PRI_RATE_ADAPT_19K2 0x0B
241 #define PRI_RATE_ADAPT_32K 0x0C
242 #define PRI_RATE_ADAPT_38K4 0x0D
243 #define PRI_RATE_ADAPT_48K 0x0E
244 #define PRI_RATE_ADAPT_56K 0x0F
245 #define PRI_RATE_ADAPT_57K6 0x12
246 #define PRI_RATE_ADAPT_28K8 0x13
247 #define PRI_RATE_ADAPT_24K 0x14
248 #define PRI_RATE_ADAPT_0K1345 0x15
249 #define PRI_RATE_ADAPT_0K1 0x16
250 #define PRI_RATE_ADAPT_0K075_1K2 0x17
251 #define PRI_RATE_ADAPT_1K2_0K075 0x18
252 #define PRI_RATE_ADAPT_0K05 0x19
253 #define PRI_RATE_ADAPT_0K075 0x1A
254 #define PRI_RATE_ADAPT_0K110 0x1B
255 #define PRI_RATE_ADAPT_0K150 0x1C
256 #define PRI_RATE_ADAPT_0K200 0x1D
257 #define PRI_RATE_ADAPT_0K300 0x1E
258 #define PRI_RATE_ADAPT_12K 0x1F
260 /* in-band negotiation flag for rateadaption bit 5 */
261 #define PRI_RATE_ADAPT_NEGOTIATION_POSS 0x20
263 /* async flag for rateadaption bit 6 */
264 #define PRI_RATE_ADAPT_ASYNC 0x40
267 #define PRI_NOTIFY_USER_SUSPENDED 0x00 /* User suspended */
268 #define PRI_NOTIFY_USER_RESUMED 0x01 /* User resumed */
269 #define PRI_NOTIFY_BEARER_CHANGE 0x02 /* Bearer service change (DSS1) */
270 #define PRI_NOTIFY_ASN1_COMPONENT 0x03 /* ASN.1 encoded component (DSS1) */
271 #define PRI_NOTIFY_COMPLETION_DELAY 0x04 /* Call completion delay */
272 #define PRI_NOTIFY_CONF_ESTABLISHED 0x42 /* Conference established */
273 #define PRI_NOTIFY_CONF_DISCONNECTED 0x43 /* Conference disconnected */
274 #define PRI_NOTIFY_CONF_PARTY_ADDED 0x44 /* Other party added */
275 #define PRI_NOTIFY_CONF_ISOLATED 0x45 /* Isolated */
276 #define PRI_NOTIFY_CONF_REATTACHED 0x46 /* Reattached */
277 #define PRI_NOTIFY_CONF_OTHER_ISOLATED 0x47 /* Other party isolated */
278 #define PRI_NOTIFY_CONF_OTHER_REATTACHED 0x48 /* Other party reattached */
279 #define PRI_NOTIFY_CONF_OTHER_SPLIT 0x49 /* Other party split */
280 #define PRI_NOTIFY_CONF_OTHER_DISCONNECTED 0x4a /* Other party disconnected */
281 #define PRI_NOTIFY_CONF_FLOATING 0x4b /* Conference floating */
282 #define PRI_NOTIFY_WAITING_CALL 0x60 /* Call is waiting call */
283 #define PRI_NOTIFY_DIVERSION_ACTIVATED 0x68 /* Diversion activated (DSS1) */
284 #define PRI_NOTIFY_TRANSFER_ALERTING 0x69 /* Call transfer, alerting */
285 #define PRI_NOTIFY_TRANSFER_ACTIVE 0x6a /* Call transfer, active */
286 #define PRI_NOTIFY_REMOTE_HOLD 0x79 /* Remote hold */
287 #define PRI_NOTIFY_REMOTE_RETRIEVAL 0x7a /* Remote retrieval */
288 #define PRI_NOTIFY_CALL_DIVERTING 0x7b /* Call is diverting */
290 #define PRI_COPY_DIGITS_CALLED_NUMBER
292 /* Network Specific Facilities (AT&T) */
293 #define PRI_NSF_NONE -1
294 #define PRI_NSF_SID_PREFERRED 0xB1
295 #define PRI_NSF_ANI_PREFERRED 0xB2
296 #define PRI_NSF_SID_ONLY 0xB3
297 #define PRI_NSF_ANI_ONLY 0xB4
298 #define PRI_NSF_CALL_ASSOC_TSC 0xB9
299 #define PRI_NSF_NOTIF_CATSC_CLEARING 0xBA
300 #define PRI_NSF_OPERATOR 0xB5
301 #define PRI_NSF_PCCO 0xB6
302 #define PRI_NSF_SDN 0xE1
303 #define PRI_NSF_TOLL_FREE_MEGACOM 0xE2
304 #define PRI_NSF_MEGACOM 0xE3
305 #define PRI_NSF_ACCUNET 0xE6
306 #define PRI_NSF_LONG_DISTANCE_SERVICE 0xE7
307 #define PRI_NSF_INTERNATIONAL_TOLL_FREE 0xE8
308 #define PRI_NSF_ATT_MULTIQUEST 0xF0
309 #define PRI_NSF_CALL_REDIRECTION_SERVICE 0xF7
312 #define PRI_RELAX_TRB
315 typedef struct q921_call q921_call
;
316 typedef struct q931_call q931_call
;
318 typedef struct pri_event_generic
{
319 /* Events with no additional information fall in this category */
324 typedef struct pri_event_error
{
329 typedef struct pri_event_restart
{
334 typedef struct pri_event_ringing
{
340 char useruserinfo
[260]; /* User->User info */
344 typedef struct pri_event_answer
{
347 int tei
; /* belongs to this tei */
351 char useruserinfo
[260]; /* User->User info */
355 typedef struct pri_event_facname
{
357 char callingname
[256];
358 char callingnum
[256];
364 #define PRI_CALLINGPLANANI
365 #define PRI_CALLINGPLANRDNIS
366 typedef struct pri_event_ring
{
368 int channel
; /* Channel requested */
369 int callingpres
; /* Presentation of Calling CallerID */
370 int callingpresuser
; /* Presentation of Calling CallerID */
371 int callingplan
; /* Dialing plan of Calling entity */
372 int callingplanuser
; /* Dialing plan of Calling entity */
373 int callingplanani
; /* Dialing plan of Calling entity ANI */
374 char callingnum
[256]; /* Calling number, network provided */
375 char callingani
[256]; /* Calling number, user provided */
376 char callingname
[256]; /* Calling name (if provided) */
377 int calledplan
; /* Dialing plan of Called number */
378 int ani2
; /* ANI II */
379 char callednum
[256]; /* Called number */
380 char redirectingnum
[256]; /* Redirecting number */
381 char redirectingname
[256]; /* Redirecting name */
382 int redirectingreason
; /* Reason for redirect */
383 int callingplanrdnis
; /* Dialing plan of Redirecting Number */
384 char useruserinfo
[260]; /* User->User info */
385 int flexible
; /* Are we flexible with our channel selection? */
386 int cref
; /* Call Reference Number */
387 int ctype
; /* Call type (see PRI_TRANS_CAP_* */
388 int layer1
; /* User layer 1 */
389 int complete
; /* Have we seen "Complete" i.e. no more number? */
390 q931_call
*call
; /* Opaque call pointer */
391 int tei
; /* belongs to this tei */
392 char callingsubaddr
[256]; /* Calling parties subaddress */
395 char origcalledname
[256];
396 char origcallednum
[256];
397 int callingplanorigcalled
; /* Dialing plan of Originally Called Number */
398 int origredirectingreason
;
399 char lowlayercompat
[16];
400 char highlayercompat
[4];
403 typedef struct pri_event_hangup
{
405 int channel
; /* Channel requested */
410 q931_call
*call
; /* Opaque call pointer */
411 long aoc_units
; /* Advise of Charge number of charged units */
412 char useruserinfo
[260]; /* User->User info */
415 typedef struct pri_event_restart_ack
{
418 } pri_event_restart_ack
;
420 #define PRI_PROGRESS_CAUSE
421 typedef struct pri_event_proceeding
{
429 } pri_event_proceeding
;
431 typedef struct pri_event_setup_ack
{
435 } pri_event_setup_ack
;
437 typedef struct pri_event_notify
{
443 typedef struct pri_event_keypad_digit
{
448 } pri_event_keypad_digit
;
450 typedef struct pri_event_hold_req
{
456 } pri_event_hold_req
;
458 /* euroisdn faciltiy fun */
459 typedef struct pri_event_facility_req
{
465 char forwardnum
[256]; /* Redirection destination */
467 } pri_event_facility_req
;
469 typedef struct pri_event_retrieve_req
{
475 } pri_event_retrieve_req
;
477 typedef struct pri_event_suspend_req
{
484 } pri_event_suspend_req
;
486 typedef struct pri_event_resume_req
{
493 } pri_event_resume_req
;
495 typedef struct pri_event_display
{
506 pri_event_generic gen
; /* Generic view */
507 pri_event_restart restart
; /* Restart view */
508 pri_event_error err
; /* Error view */
509 pri_event_facname facname
; /* Caller*ID Name on Facility */
510 pri_event_facility_req facility
; /* sservices */
511 pri_event_ring ring
; /* Ring */
512 pri_event_hangup hangup
; /* Hang up */
513 pri_event_ringing ringing
; /* Ringing */
514 pri_event_answer answer
; /* Answer */
515 pri_event_restart_ack restartack
; /* Restart Acknowledge */
516 pri_event_proceeding proceeding
; /* Call proceeding & Progress */
517 pri_event_setup_ack setup_ack
; /* SETUP_ACKNOWLEDGE structure */
518 pri_event_notify notify
; /* Notification */
519 pri_event_hold_req hold_req
;
520 pri_event_retrieve_req retrieve_req
;
521 pri_event_suspend_req suspend_req
;
522 pri_event_resume_req resume_req
;
523 pri_event_display display
;
524 pri_event_keypad_digit digit
; /* Digits that come during a call */
531 /* Type declaration for callbacks to read or write a HDLC frame as below */
532 typedef int (*pri_io_cb
)(struct pri
*pri
, void *buf
, int buflen
);
534 /* Create a D-channel on a given file descriptor. The file descriptor must be a
535 channel operating in HDLC mode with FCS computed by the fd's driver. Also it
536 must be NON-BLOCKING! Frames received on the fd should include FCS. Nodetype
537 must be one of PRI_NETWORK or PRI_CPE. switchtype should be PRI_SWITCH_* */
538 extern struct pri
*pri_new(int fd
, int nodetype
, int switchtype
, int span
);
540 extern void pri_shutdown(struct pri
*pri
);
542 /* Create D-channel just as above with user defined I/O callbacks and data */
543 extern struct pri
*pri_new_cb(int fd
, int nodetype
, int switchtype
, pri_io_cb io_read
, pri_io_cb io_write
, void *userdata
);
545 /* Retrieve the user data associated with the D channel */
546 extern void *pri_get_userdata(struct pri
*pri
);
548 /* Set the user data associated with the D channel */
549 extern void pri_set_userdata(struct pri
*pri
, void *userdata
);
551 /* Set Network Specific Facility for PRI */
552 extern void pri_set_nsf(struct pri
*pri
, int nsf
);
554 /* Set debug parameters on PRI -- see above debug definitions */
555 extern void pri_set_debug(struct pri
*pri
, int debug
);
557 /* Get debug parameters on PRI -- see above debug definitions */
558 extern int pri_get_debug(struct pri
*pri
);
560 #define PRI_FACILITY_ENABLE
561 /* Enable transmission support of Facility IEs on the pri */
562 extern void pri_facility_enable(struct pri
*pri
);
564 /* Set file descriptor for debugging to a file */
565 extern void pri_set_debug_fd(struct pri
*pri
, int fd
);
567 /* Run PRI on the given D-channel, taking care of any events that
568 need to be handled. If block is set, it will block until an event
569 occurs which needs to be handled */
570 extern pri_event
*pri_dchannel_run(struct pri
*pri
, int block
);
572 /* Check for an outstanding event on the PRI */
573 pri_event
*pri_check_event(struct pri
*pri
);
575 /* Give a name to a given event ID */
576 extern char *pri_event2str(int id
);
578 /* Give a name to a node type */
579 extern char *pri_node2str(int id
);
581 /* Give a name to a switch type */
582 extern char *pri_switch2str(int id
);
585 extern void pri_dump_event(struct pri
*pri
, pri_event
*e
);
587 /* Turn presentation into a string */
588 extern char *pri_pres2str(int pres
);
590 /* Turn numbering plan into a string */
591 extern char *pri_plan2str(int plan
);
593 /* Turn cause into a string */
594 extern char *pri_cause2str(int cause
);
596 /* Acknowledge a call and place it on the given channel. Set info to non-zero if there
597 is in-band data available on the channel */
598 extern int pri_acknowledge(struct pri
*pri
, q931_call
*call
, int channel
, int info
);
600 /* Send a digit in overlap mode */
601 extern int pri_information(struct pri
*pri
, q931_call
*call
, char digit
);
603 #define PRI_KEYPAD_FACILITY_TX
604 /* Send a keypad facility string of digits */
605 extern int pri_keypad_facility(struct pri
*pri
, q931_call
*call
, char *digits
);
607 /* Send a INFO msg with display ie */
608 extern int pri_information_display(struct pri
*pri
, q931_call
*call
, char *display
);
610 /* add a display ie to a call, so it can be sent with the next message */
611 extern int pri_add_display(struct pri
*pri
, q931_call
*call
, char *display
);
613 /* Answer the incomplete(call without called number) call on the given channel.
614 Set non-isdn to non-zero if you are not connecting to ISDN equipment */
615 extern int pri_need_more_info(struct pri
*pri
, q931_call
*call
, int channel
, int nonisdn
);
617 /* Answer the call on the given channel (ignored if you called acknowledge already).
618 Set non-isdn to non-zero if you are not connecting to ISDN equipment */
619 extern int pri_answer(struct pri
*pri
, q931_call
*call
, int channel
, int nonisdn
);
621 extern int pri_deflect(struct pri
*pri
, q931_call
*call
, char *destination
);
624 extern int pri_hold_acknowledge(struct pri
*pri
, q931_call
*call
);
626 /* Reject a HOLD_REQ */
627 extern int pri_hold_reject(struct pri
*pri
, q931_call
*call
);
629 /* Ack a RETRIEVE_REQ */
630 extern int pri_retrieve_acknowledge(struct pri
*pri
, q931_call
*call
, int channel
);
632 /* Reject a RETRIEVE_REQ */
633 extern int pri_retrieve_reject(struct pri
*pri
, q931_call
*call
);
635 /* Ack a SUSPEND_REQ */
636 extern int pri_suspend_acknowledge(struct pri
*pri
, q931_call
*call
, char *display
);
638 /* Reject a SUSPEND_REQ */
639 extern int pri_suspend_reject(struct pri
*pri
, q931_call
*call
, char *display
);
641 /* Reject a RESUME_REQ */
642 extern int pri_resume_reject(struct pri
*pri
, q931_call
*call
, char *display
);
644 /* Ack a RESUME_REQ */
645 extern int pri_resume_acknowledge(struct pri
*pri
, q931_call
*call
, int channel
, char *display
);
647 /* Send a Facility Message */
648 extern int pri_facility(struct pri
*pri
, q931_call
*call
, int operation
, char *arguments
);
650 /* Set CRV reference for GR-303 calls */
654 #undef pri_disconnect
656 /* backwards compatibility for those who don't use asterisk with libpri */
657 #define pri_release(a,b,c) \
658 pri_hangup(a,b,c, -1)
660 #define pri_disconnect(a,b,c) \
661 pri_hangup(a,b,c, -1)
665 extern int pri_hangup(struct pri
*pri
, q931_call
*call
, int cause
, int aocunits
);
667 #define PRI_DESTROYCALL
668 extern void pri_destroycall(struct pri
*pri
, q931_call
*call
);
671 extern int pri_restart(struct pri
*pri
);
673 extern int pri_reset(struct pri
*pri
, int channel
);
675 /* Create a new call */
676 extern q931_call
*pri_new_call(struct pri
*pri
);
678 /* Retrieve CRV reference for GR-303 calls. Returns >0 on success. */
679 extern int pri_get_crv(struct pri
*pri
, q931_call
*call
, int *callmode
);
681 /* Retrieve CRV reference for GR-303 calls. CRV must be >0, call mode should be 0 */
682 extern int pri_set_crv(struct pri
*pri
, q931_call
*call
, int crv
, int callmode
);
684 /* How long until you need to poll for a new event */
685 extern struct timeval
*pri_schedule_next(struct pri
*pri
);
687 /* Run any pending schedule events */
688 extern pri_event
*pri_schedule_run(struct pri
*pri
);
689 extern pri_event
*pri_schedule_run_tv(struct pri
*pri
, const struct timeval
*now
);
691 extern int pri_call(struct pri
*pri
, q931_call
*c
, int transmode
, int channel
,
692 int exclusive
, int nonisdn
, char *caller
, int callerplan
, char *callername
, int callerpres
,
693 char *called
,int calledplan
, int ulayer1
);
695 extern struct pri_sr
*pri_sr_new(void);
696 extern void pri_sr_free(struct pri_sr
*sr
);
698 extern int pri_sr_set_channel(struct pri_sr
*sr
, int channel
, int exclusive
, int nonisdn
);
699 extern int pri_sr_set_bearer(struct pri_sr
*sr
, int transmode
, int userl1
, char *llc
);
700 extern int pri_sr_set_called(struct pri_sr
*sr
, char *called
, int calledplan
, int complete
);
701 extern int pri_sr_set_caller(struct pri_sr
*sr
, char *caller
, char *callername
, int callerplan
, int callerpres
);
702 extern int pri_sr_set_redirecting(struct pri_sr
*sr
, char *num
, int plan
, int pres
, int reason
);
703 #define PRI_USER_USER_TX
704 /* Set the user user field. Warning! don't send binary data accross this field */
705 extern void pri_sr_set_useruser(struct pri_sr
*sr
, const char *userchars
);
707 extern void pri_call_set_useruser(q931_call
*sr
, const char *userchars
);
709 extern int pri_setup(struct pri
*pri
, q931_call
*call
, struct pri_sr
*req
);
711 /* Set a call has a call indpendent signalling connection (i.e. no bchan) */
712 extern int pri_sr_set_connection_call_independent(struct pri_sr
*req
);
714 /* Send an MWI indication to a remote location. If activate is non zero, activates, if zero, decativates */
715 extern int pri_mwi_activate(struct pri
*pri
, q931_call
*c
, char *caller
, int callerplan
, char *callername
, int callerpres
, char *called
, int calledplan
);
717 /* Send an MWI deactivate request to a remote location */
718 extern int pri_mwi_deactivate(struct pri
*pri
, q931_call
*c
, char *caller
, int callerplan
, char *callername
, int callerpres
, char *called
, int calledplan
);
721 /* Attempt to pass the channels back to the NET side if compatable and
722 * suscribed. Sometimes called 2 bchannel transfer (2BCT) */
723 int pri_channel_bridge(q931_call
*call1
, q931_call
*call2
);
725 /* Override message and error stuff */
726 #define PRI_NEW_SET_API
727 extern void pri_set_message(void (*__pri_error
)(char *, int span
));
728 extern void pri_set_error(void (*__pri_error
)(char *, int span
));
730 /* Set overlap mode */
731 #define PRI_SET_OVERLAPDIAL
732 extern void pri_set_overlapdial(struct pri
*pri
,int state
);
734 #define PRI_DUMP_INFO_STR
735 extern char *pri_dump_info_str(struct pri
*pri
);
737 /* Get file descriptor */
738 extern int pri_fd(struct pri
*pri
);
741 /* Send call proceeding */
742 extern int pri_progress(struct pri
*pri
, q931_call
*c
, int channel
, int info
);
744 #define PRI_PROCEEDING_FULL
745 /* Send call proceeding */
746 extern int pri_proceeding(struct pri
*pri
, q931_call
*c
, int channel
, int info
);
748 /* Enable inband progress when a DISCONNECT is received */
749 void pri_set_inbanddisconnect(struct pri
*pri
, unsigned int enable
);
751 /* Enslave a PRI to another, so they share the same call list
752 (and maybe some timers) */
753 extern void pri_enslave(struct pri
*master
, struct pri
*slave
);
755 #define PRI_GR303_SUPPORT
756 #define PRI_ENSLAVE_SUPPORT
757 #define PRI_SETUP_CALL
758 #define PRI_RECEIVE_SUBADDR
759 #define PRI_REDIRECTING_REASON
760 #define PRI_AOC_UNITS
763 /* Send notification */
764 extern int pri_notify(struct pri
*pri
, q931_call
*c
, int channel
, int info
);
766 /* Get/Set PRI Timers */
767 #define PRI_GETSET_TIMERS
768 extern int pri_set_timer(struct pri
*pri
, int timer
, int value
);
769 extern int pri_get_timer(struct pri
*pri
, int timer
);
770 extern int pri_timer2idx(char *timer
);
772 #define PRI_MAX_TIMERS 32
774 #define PRI_TIMER_N200 0 /* Maximum numer of q921 retransmissions */
775 #define PRI_TIMER_N201 1 /* Maximum numer of octets in an information field */
776 #define PRI_TIMER_N202 2 /* Maximum numer of transmissions of the TEI identity request message */
777 #define PRI_TIMER_K 3 /* Maximum number of outstanding I-frames */
779 #define PRI_TIMER_T200 4 /* time between SABME's */
780 #define PRI_TIMER_T201 5 /* minimum time between retransmissions of the TEI Identity check messages */
781 #define PRI_TIMER_T202 6 /* minimum time between transmission of TEI Identity request messages */
782 #define PRI_TIMER_T203 7 /* maxiumum time without exchanging packets */
784 #define PRI_TIMER_T300 8
785 #define PRI_TIMER_T301 9 /* maximum time to respond to an ALERT */
786 #define PRI_TIMER_T302 10
787 #define PRI_TIMER_T303 11 /* maximum time to wait after sending a SETUP without a response */
788 #define PRI_TIMER_T304 12
789 #define PRI_TIMER_T305 13
790 #define PRI_TIMER_T306 14
791 #define PRI_TIMER_T307 15
792 #define PRI_TIMER_T308 16
793 #define PRI_TIMER_T309 17
794 #define PRI_TIMER_T310 18 /* maximum time between receiving a CALLPROCEEDING and receiving a ALERT/CONNECT/DISCONNECT/PROGRESS */
795 #define PRI_TIMER_T313 19
796 #define PRI_TIMER_T314 20
797 #define PRI_TIMER_T316 21 /* maximum time between transmitting a RESTART and receiving a RESTART ACK */
798 #define PRI_TIMER_T317 22
799 #define PRI_TIMER_T318 23
800 #define PRI_TIMER_T319 24
801 #define PRI_TIMER_T320 25
802 #define PRI_TIMER_T321 26
803 #define PRI_TIMER_T322 27
805 /* Get PRI version */
806 const char *pri_get_version(void);