decoders/dali/lists.py

   1 ##
   2 ## This file is part of the libsigrokdecode project.
   3 ##
   4 ## Copyright (C) 2015 Jeremy Swanson <jeremy@rakocontrols.com>
   5 ##
   6 ## This program is free software; you can redistribute it and/or modify
   7 ## it under the terms of the GNU General Public License as published by
   8 ## the Free Software Foundation; either version 2 of the License, or
   9 ## (at your option) any later version.
  10 ##
  11 ## This program is distributed in the hope that it will be useful,
  12 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 ## GNU General Public License for more details.
  15 ##
  16 ## You should have received a copy of the GNU General Public License
  17 ## along with this program.  If not, see <http://www.gnu.org/licenses/>.
  18 ##
  19
  20 # DALI extended commands
  21 extended_commands = {
  22     0xA1: ['Terminate special processes', 'Terminate'],
  23     0xA3: ['DTR = DATA', 'DTR'],
  24     0xA5: ['INITIALISE', 'INIT'],
  25     0xA7: ['RANDOMISE', 'RAND'],
  26     0xA9: ['COMPARE', 'COMP'],
  27     0xAB: ['WITHDRAW', 'WDRAW'],
  28     0xB1: ['SET SEARCH H', 'SAH'],
  29     0xB3: ['SET SEARCH M', 'SAM'],
  30     0xB5: ['SET SEARCH L', 'SAL'],
  31     0xB7: ['Program Short Address', 'ProgSA'],
  32     0xB9: ['Verify Short Address', 'VfySA'],
  33     0xBB: ['Query Short Address', 'QryShort'],
  34     0xBD: ['Physical Selection', 'PysSel'],
  35     0xC1: ['Enable Device Type X', 'EnTyp'],
  36     0xC3: ['DTR1 = DATA', 'DTR1'],
  37     0xC5: ['DTR2 = DATA', 'DTR2'],
  38     0xC7: ['Write Memory Location', 'WRI'],
  39 }
  40
  41 # List of commands
  42 dali_commands = {
  43     0x00: ['Immediate Off', 'IOFF'],
  44     0x01: ['Up 200ms', 'Up'],
  45     0x02: ['Down 200ms', 'Down'],
  46     0x03: ['Step Up', 'Step+'],
  47     0x04: ['Step Down', 'Step-'],
  48     0x05: ['Recall Maximum Level', 'Recall Max'],
  49     0x06: ['Recall Minimum Level', 'Recall Min'],
  50     0x07: ['Step down and off', 'Down Off'],
  51     0x08: ['Step ON and UP', 'On Up'],
  52     0x20: ['Reset', 'Rst'],
  53     0x21: ['Store Dim Level in DTR', 'Level -> DTR'],
  54     0x2A: ['Store DTR as Max Level', 'DTR->Max'],
  55     0x2B: ['Store DTR as Min Level', 'DTR->Min'],
  56     0x2C: ['Store DTR as Fail Level', 'DTR->Fail'],
  57     0x2D: ['Store DTR as Power On Level', 'DTR->Poweron'],
  58     0x2E: ['Store DTR as Fade Time', 'DTR->Fade'],
  59     0x2F: ['Store DTR as Fade Rate', 'DTR->Rate'],
  60     0x80: ['Store DTR as Short Address', 'DTR->Add'],
  61     0x81: ['Enable Memory Write', 'WEn'],
  62     0x90: ['Query Status', 'Status'],
  63     0x91: ['Query Ballast', 'Ballast'],
  64     0x92: ['Query Lamp Failure', 'LmpFail'],
  65     0x93: ['Query Power On', 'Power On'],
  66     0x94: ['Query Limit Error', 'Limit Err'],
  67     0x95: ['Query Reset', 'Reset State'],
  68     0x96: ['Query Missing Short Address', 'NoSrt'],
  69     0x97: ['Query Version', 'Ver'],
  70     0x98: ['Query DTR', 'GetDTR'],
  71     0x99: ['Query Device Type', 'Type'],
  72     0x9A: ['Query Physical Minimum', 'PhysMin'],
  73     0x9B: ['Query Power Fail', 'PowerFailed'],
  74     0x9C: ['Query DTR1', 'GetDTR1'],
  75     0x9D: ['Query DTR2', 'GetDTR2'],
  76     0xA0: ['Query Level', 'GetLevel'],
  77     0xA1: ['Query Max Level', 'GetMax'],
  78     0xA2: ['Query Min Level', 'GetMin'],
  79     0xA3: ['Query Power On', 'GetPwrOn'],
  80     0xA4: ['Query Fail Level', 'GetFail'],
  81     0xA5: ['Query Fade Rate', 'GetRate'],
  82     0xA6: ['Query Power Fail', 'PwrFail'],
  83     0xC0: ['Query Groups 0-7', 'GetGrpsL'],
  84     0xC1: ['Query Groups 7-15', 'GetGrpsH'],
  85     0xC2: ['Query BRNH', 'BRNH'],
  86     0xC3: ['Query BRNM', 'BRNM'],
  87     0xC4: ['Query BRNL', 'BRNL'],
  88     0xC5: ['Query Memory', 'GetMem'],
  89 }
  90
  91 # DALI device type 8
  92 dali_device_type8 = {
  93     0xE0: ['Set Temp X-Y Coordinate', 'Set X-Y'],
  94     0xE2: ['Activate Colour Set point', 'Activate SetPoint'],
  95     0xE7: ['Set Colour Temperature Tc', 'DTRs->ColTemp'],
  96     0xF9: ['Query Features', 'QryFeats'],
  97     0xFA: ['Query Current Setpoint Colour', 'GetSetPoint'],
  98 }