1 /*******************************************************************************
4 Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms of the GNU General Public License as published by the Free
8 Software Foundation; either version 2 of the License, or (at your option)
11 This program is distributed in the hope that it will be useful, but WITHOUT
12 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 You should have received a copy of the GNU General Public License along with
17 this program; if not, write to the Free Software Foundation, Inc., 59
18 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
20 The full GNU General Public License is included in this distribution in the
24 Linux NICS <linux.nics@intel.com>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
30 * e100.c: Intel(R) PRO/100 ethernet driver
32 * (Re)written 2003 by scott.feldman@intel.com. Based loosely on
33 * original e100 driver, but better described as a munging of
34 * e100, e1000, eepro100, tg3, 8139cp, and other drivers.
37 * Intel 8255x 10/100 Mbps Ethernet Controller Family,
38 * Open Source Software Developers Manual,
39 * http://sourceforge.net/projects/e1000
46 * The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet
47 * controller family, which includes the 82557, 82558, 82559, 82550,
48 * 82551, and 82562 devices. 82558 and greater controllers
49 * integrate the Intel 82555 PHY. The controllers are used in
50 * server and client network interface cards, as well as in
51 * LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx
52 * configurations. 8255x supports a 32-bit linear addressing
53 * mode and operates at 33Mhz PCI clock rate.
55 * II. Driver Operation
57 * Memory-mapped mode is used exclusively to access the device's
58 * shared-memory structure, the Control/Status Registers (CSR). All
59 * setup, configuration, and control of the device, including queuing
60 * of Tx, Rx, and configuration commands is through the CSR.
61 * cmd_lock serializes accesses to the CSR command register. cb_lock
62 * protects the shared Command Block List (CBL).
64 * 8255x is highly MII-compliant and all access to the PHY go
65 * through the Management Data Interface (MDI). Consequently, the
66 * driver leverages the mii.c library shared with other MII-compliant
69 * Big- and Little-Endian byte order as well as 32- and 64-bit
70 * archs are supported. Weak-ordered memory and non-cache-coherent
71 * archs are supported.
75 * A Tx skb is mapped and hangs off of a TCB. TCBs are linked
76 * together in a fixed-size ring (CBL) thus forming the flexible mode
77 * memory structure. A TCB marked with the suspend-bit indicates
78 * the end of the ring. The last TCB processed suspends the
79 * controller, and the controller can be restarted by issue a CU
80 * resume command to continue from the suspend point, or a CU start
81 * command to start at a given position in the ring.
83 * Non-Tx commands (config, multicast setup, etc) are linked
84 * into the CBL ring along with Tx commands. The common structure
85 * used for both Tx and non-Tx commands is the Command Block (CB).
87 * cb_to_use is the next CB to use for queuing a command; cb_to_clean
88 * is the next CB to check for completion; cb_to_send is the first
89 * CB to start on in case of a previous failure to resume. CB clean
90 * up happens in interrupt context in response to a CU interrupt.
91 * cbs_avail keeps track of number of free CB resources available.
93 * Hardware padding of short packets to minimum packet size is
94 * enabled. 82557 pads with 7Eh, while the later controllers pad
99 * The Receive Frame Area (RFA) comprises a ring of Receive Frame
100 * Descriptors (RFD) + data buffer, thus forming the simplified mode
101 * memory structure. Rx skbs are allocated to contain both the RFD
102 * and the data buffer, but the RFD is pulled off before the skb is
103 * indicated. The data buffer is aligned such that encapsulated
104 * protocol headers are u32-aligned. Since the RFD is part of the
105 * mapped shared memory, and completion status is contained within
106 * the RFD, the RFD must be dma_sync'ed to maintain a consistent
107 * view from software and hardware.
109 * Under typical operation, the receive unit (RU) is start once,
110 * and the controller happily fills RFDs as frames arrive. If
111 * replacement RFDs cannot be allocated, or the RU goes non-active,
112 * the RU must be restarted. Frame arrival generates an interrupt,
113 * and Rx indication and re-allocation happen in the same context,
114 * therefore no locking is required. A software-generated interrupt
115 * is generated from the watchdog to recover from a failed allocation
116 * senario where all Rx resources have been indicated and none re-
121 * VLAN offloading of tagging, stripping and filtering is not
122 * supported, but driver will accommodate the extra 4-byte VLAN tag
123 * for processing by upper layers. Tx/Rx Checksum offloading is not
124 * supported. Tx Scatter/Gather is not supported. Jumbo Frames is
125 * not supported (hardware limitation).
127 * MagicPacket(tm) WoL support is enabled/disabled via ethtool.
129 * Thanks to JC (jchapman@katalix.com) for helping with
130 * testing/troubleshooting the development driver.
133 * o several entry points race with dev->close
134 * o check for tx-no-resources/stop Q races with tx clean/wake Q
137 #include <linux/config.h>
138 #include <linux/module.h>
139 #include <linux/moduleparam.h>
140 #include <linux/kernel.h>
141 #include <linux/types.h>
142 #include <linux/slab.h>
143 #include <linux/delay.h>
144 #include <linux/init.h>
145 #include <linux/pci.h>
146 #include <linux/netdevice.h>
147 #include <linux/etherdevice.h>
148 #include <linux/mii.h>
149 #include <linux/if_vlan.h>
150 #include <linux/skbuff.h>
151 #include <linux/ethtool.h>
152 #include <linux/string.h>
153 #include <asm/unaligned.h>
156 #define DRV_NAME "e100"
157 #define DRV_EXT "-NAPI"
158 #define DRV_VERSION "3.0.27-k2"DRV_EXT
159 #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
160 #define DRV_COPYRIGHT "Copyright(c) 1999-2004 Intel Corporation"
161 #define PFX DRV_NAME ": "
163 #define E100_WATCHDOG_PERIOD (2 * HZ)
164 #define E100_NAPI_WEIGHT 16
166 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
167 MODULE_AUTHOR(DRV_COPYRIGHT
);
168 MODULE_LICENSE("GPL");
170 static int debug
= 3;
171 module_param(debug
, int, 0);
172 MODULE_PARM_DESC(debug
, "Debug level (0=none,...,16=all)");
173 #define DPRINTK(nlevel, klevel, fmt, args...) \
174 (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
175 printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
176 __FUNCTION__ , ## args))
178 #define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
179 PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
180 PCI_CLASS_NETWORK_ETHERNET << 8, 0xFFFF00, ich }
181 static struct pci_device_id e100_id_table
[] = {
182 INTEL_8255X_ETHERNET_DEVICE(0x1029, 0),
183 INTEL_8255X_ETHERNET_DEVICE(0x1030, 0),
184 INTEL_8255X_ETHERNET_DEVICE(0x1031, 3),
185 INTEL_8255X_ETHERNET_DEVICE(0x1032, 3),
186 INTEL_8255X_ETHERNET_DEVICE(0x1033, 3),
187 INTEL_8255X_ETHERNET_DEVICE(0x1034, 3),
188 INTEL_8255X_ETHERNET_DEVICE(0x1038, 3),
189 INTEL_8255X_ETHERNET_DEVICE(0x1039, 4),
190 INTEL_8255X_ETHERNET_DEVICE(0x103A, 4),
191 INTEL_8255X_ETHERNET_DEVICE(0x103B, 4),
192 INTEL_8255X_ETHERNET_DEVICE(0x103C, 4),
193 INTEL_8255X_ETHERNET_DEVICE(0x103D, 4),
194 INTEL_8255X_ETHERNET_DEVICE(0x103E, 4),
195 INTEL_8255X_ETHERNET_DEVICE(0x1050, 5),
196 INTEL_8255X_ETHERNET_DEVICE(0x1051, 5),
197 INTEL_8255X_ETHERNET_DEVICE(0x1052, 5),
198 INTEL_8255X_ETHERNET_DEVICE(0x1053, 5),
199 INTEL_8255X_ETHERNET_DEVICE(0x1054, 5),
200 INTEL_8255X_ETHERNET_DEVICE(0x1055, 5),
201 INTEL_8255X_ETHERNET_DEVICE(0x1056, 5),
202 INTEL_8255X_ETHERNET_DEVICE(0x1057, 5),
203 INTEL_8255X_ETHERNET_DEVICE(0x1064, 6),
204 INTEL_8255X_ETHERNET_DEVICE(0x1065, 6),
205 INTEL_8255X_ETHERNET_DEVICE(0x1066, 6),
206 INTEL_8255X_ETHERNET_DEVICE(0x1067, 6),
207 INTEL_8255X_ETHERNET_DEVICE(0x1068, 6),
208 INTEL_8255X_ETHERNET_DEVICE(0x1069, 6),
209 INTEL_8255X_ETHERNET_DEVICE(0x106A, 6),
210 INTEL_8255X_ETHERNET_DEVICE(0x106B, 6),
211 INTEL_8255X_ETHERNET_DEVICE(0x1059, 0),
212 INTEL_8255X_ETHERNET_DEVICE(0x1209, 0),
213 INTEL_8255X_ETHERNET_DEVICE(0x1229, 0),
214 INTEL_8255X_ETHERNET_DEVICE(0x2449, 2),
215 INTEL_8255X_ETHERNET_DEVICE(0x2459, 2),
216 INTEL_8255X_ETHERNET_DEVICE(0x245D, 2),
219 MODULE_DEVICE_TABLE(pci
, e100_id_table
);
222 mac_82557_D100_A
= 0,
223 mac_82557_D100_B
= 1,
224 mac_82557_D100_C
= 2,
225 mac_82558_D101_A4
= 4,
226 mac_82558_D101_B0
= 5,
230 mac_82550_D102_C
= 13,
238 phy_100a
= 0x000003E0,
239 phy_100c
= 0x035002A8,
240 phy_82555_tx
= 0x015002A8,
241 phy_nsc_tx
= 0x5C002000,
242 phy_82562_et
= 0x033002A8,
243 phy_82562_em
= 0x032002A8,
244 phy_82562_ek
= 0x031002A8,
245 phy_82562_eh
= 0x017002A8,
246 phy_unknown
= 0xFFFFFFFF,
249 /* CSR (Control/Status Registers) */
272 stat_ack_not_ours
= 0x00,
273 stat_ack_sw_gen
= 0x04,
275 stat_ack_cu_idle
= 0x20,
276 stat_ack_frame_rx
= 0x40,
277 stat_ack_cu_cmd_done
= 0x80,
278 stat_ack_not_present
= 0xFF,
279 stat_ack_rx
= (stat_ack_sw_gen
| stat_ack_rnr
| stat_ack_frame_rx
),
280 stat_ack_tx
= (stat_ack_cu_idle
| stat_ack_cu_cmd_done
),
284 irq_mask_none
= 0x00,
292 ruc_load_base
= 0x06,
295 cuc_dump_addr
= 0x40,
296 cuc_dump_stats
= 0x50,
297 cuc_load_base
= 0x60,
298 cuc_dump_reset
= 0x70,
302 cuc_dump_complete
= 0x0000A005,
303 cuc_dump_reset_complete
= 0x0000A007,
307 software_reset
= 0x0000,
309 selective_reset
= 0x0002,
312 enum eeprom_ctrl_lo
{
320 mdi_write
= 0x04000000,
321 mdi_read
= 0x08000000,
322 mdi_ready
= 0x10000000,
332 enum eeprom_offsets
{
333 eeprom_cnfg_mdix
= 0x03,
335 eeprom_config_asf
= 0x0D,
336 eeprom_smbus_addr
= 0x90,
339 enum eeprom_cnfg_mdix
{
340 eeprom_mdix_enabled
= 0x0080,
344 eeprom_id_wol
= 0x0020,
347 enum eeprom_config_asf
{
353 cb_complete
= 0x8000,
382 struct rx
*next
, *prev
;
387 #if defined(__BIG_ENDIAN_BITFIELD)
393 /*0*/ u8
X(byte_count
:6, pad0
:2);
394 /*1*/ u8
X(X(rx_fifo_limit
:4, tx_fifo_limit
:3), pad1
:1);
395 /*2*/ u8 adaptive_ifs
;
396 /*3*/ u8
X(X(X(X(mwi_enable
:1, type_enable
:1), read_align_enable
:1),
397 term_write_cache_line
:1), pad3
:4);
398 /*4*/ u8
X(rx_dma_max_count
:7, pad4
:1);
399 /*5*/ u8
X(tx_dma_max_count
:7, dma_max_count_enable
:1);
400 /*6*/ u8
X(X(X(X(X(X(X(late_scb_update
:1, direct_rx_dma
:1),
401 tno_intr
:1), cna_intr
:1), standard_tcb
:1), standard_stat_counter
:1),
402 rx_discard_overruns
:1), rx_save_bad_frames
:1);
403 /*7*/ u8
X(X(X(X(X(rx_discard_short_frames
:1, tx_underrun_retry
:2),
404 pad7
:2), rx_extended_rfd
:1), tx_two_frames_in_fifo
:1),
406 /*8*/ u8
X(X(mii_mode
:1, pad8
:6), csma_disabled
:1);
407 /*9*/ u8
X(X(X(X(X(rx_tcpudp_checksum
:1, pad9
:3), vlan_arp_tco
:1),
408 link_status_wake
:1), arp_wake
:1), mcmatch_wake
:1);
409 /*10*/ u8
X(X(X(pad10
:3, no_source_addr_insertion
:1), preamble_length
:2),
411 /*11*/ u8
X(linear_priority
:3, pad11
:5);
412 /*12*/ u8
X(X(linear_priority_mode
:1, pad12
:3), ifs
:4);
413 /*13*/ u8 ip_addr_lo
;
414 /*14*/ u8 ip_addr_hi
;
415 /*15*/ u8
X(X(X(X(X(X(X(promiscuous_mode
:1, broadcast_disabled
:1),
416 wait_after_win
:1), pad15_1
:1), ignore_ul_bit
:1), crc_16_bit
:1),
417 pad15_2
:1), crs_or_cdt
:1);
418 /*16*/ u8 fc_delay_lo
;
419 /*17*/ u8 fc_delay_hi
;
420 /*18*/ u8
X(X(X(X(X(rx_stripping
:1, tx_padding
:1), rx_crc_transfer
:1),
421 rx_long_ok
:1), fc_priority_threshold
:3), pad18
:1);
422 /*19*/ u8
X(X(X(X(X(X(X(addr_wake
:1, magic_packet_disable
:1),
423 fc_disable
:1), fc_restop
:1), fc_restart
:1), fc_reject
:1),
424 full_duplex_force
:1), full_duplex_pin
:1);
425 /*20*/ u8
X(X(X(pad20_1
:5, fc_priority_location
:1), multi_ia
:1), pad20_2
:1);
426 /*21*/ u8
X(X(pad21_1
:3, multicast_all
:1), pad21_2
:4);
427 /*22*/ u8
X(X(rx_d102_mode
:1, rx_vlan_drop
:1), pad22
:6);
431 #define E100_MAX_MULTICAST_ADDRS 64
434 u8 addr
[E100_MAX_MULTICAST_ADDRS
* ETH_ALEN
+ 2/*pad*/];
437 /* Important: keep total struct u32-aligned */
438 #define UCODE_SIZE 134
445 u32 ucode
[UCODE_SIZE
];
446 struct config config
;
459 u32 dump_buffer_addr
;
461 struct cb
*next
, *prev
;
467 lb_none
= 0, lb_mac
= 1, lb_phy
= 3,
471 u32 tx_good_frames
, tx_max_collisions
, tx_late_collisions
,
472 tx_underruns
, tx_lost_crs
, tx_deferred
, tx_single_collisions
,
473 tx_multiple_collisions
, tx_total_collisions
;
474 u32 rx_good_frames
, rx_crc_errors
, rx_alignment_errors
,
475 rx_resource_errors
, rx_overrun_errors
, rx_cdt_errors
,
476 rx_short_frame_errors
;
477 u32 fc_xmt_pause
, fc_rcv_pause
, fc_rcv_unsupported
;
478 u16 xmt_tco_frames
, rcv_tco_frames
;
498 struct param_range rfds
;
499 struct param_range cbs
;
503 /* Begin: frequently used values: keep adjacent for cache effect */
504 u32 msg_enable ____cacheline_aligned
;
505 struct net_device
*netdev
;
506 struct pci_dev
*pdev
;
508 struct rx
*rxs ____cacheline_aligned
;
509 struct rx
*rx_to_use
;
510 struct rx
*rx_to_clean
;
511 struct rfd blank_rfd
;
514 spinlock_t cb_lock ____cacheline_aligned
;
517 enum scb_cmd_lo cuc_cmd
;
518 unsigned int cbs_avail
;
520 struct cb
*cb_to_use
;
521 struct cb
*cb_to_send
;
522 struct cb
*cb_to_clean
;
524 /* End: frequently used values: keep adjacent for cache effect */
528 promiscuous
= (1 << 1),
529 multicast_all
= (1 << 2),
530 wol_magic
= (1 << 3),
531 ich_10h_workaround
= (1 << 4),
532 } flags ____cacheline_aligned
;
536 struct params params
;
537 struct net_device_stats net_stats
;
538 struct timer_list watchdog
;
539 struct timer_list blink_timer
;
540 struct mii_if_info mii
;
541 enum loopback loopback
;
546 dma_addr_t cbs_dma_addr
;
552 u32 tx_single_collisions
;
553 u32 tx_multiple_collisions
;
558 u32 rx_fc_unsupported
;
560 u32 rx_over_length_errors
;
569 static inline void e100_write_flush(struct nic
*nic
)
571 /* Flush previous PCI writes through intermediate bridges
572 * by doing a benign read */
573 (void)readb(&nic
->csr
->scb
.status
);
576 static inline void e100_enable_irq(struct nic
*nic
)
578 writeb(irq_mask_none
, &nic
->csr
->scb
.cmd_hi
);
579 e100_write_flush(nic
);
582 static inline void e100_disable_irq(struct nic
*nic
)
584 writeb(irq_mask_all
, &nic
->csr
->scb
.cmd_hi
);
585 e100_write_flush(nic
);
588 static void e100_hw_reset(struct nic
*nic
)
590 /* Put CU and RU into idle with a selective reset to get
591 * device off of PCI bus */
592 writel(selective_reset
, &nic
->csr
->port
);
593 e100_write_flush(nic
); udelay(20);
595 /* Now fully reset device */
596 writel(software_reset
, &nic
->csr
->port
);
597 e100_write_flush(nic
); udelay(20);
599 /* TCO workaround - 82559 and greater */
600 if(nic
->mac
>= mac_82559_D101M
) {
601 /* Issue a redundant CU load base without setting
602 * general pointer, and without waiting for scb to
603 * clear. This gets us into post-driver. Finally,
604 * wait 20 msec for reset to take effect. */
605 writeb(cuc_load_base
, &nic
->csr
->scb
.cmd_lo
);
609 /* Mask off our interrupt line - it's unmasked after reset */
610 e100_disable_irq(nic
);
613 static int e100_self_test(struct nic
*nic
)
615 u32 dma_addr
= nic
->dma_addr
+ offsetof(struct mem
, selftest
);
617 /* Passing the self-test is a pretty good indication
618 * that the device can DMA to/from host memory */
620 nic
->mem
->selftest
.signature
= 0;
621 nic
->mem
->selftest
.result
= 0xFFFFFFFF;
623 writel(selftest
| dma_addr
, &nic
->csr
->port
);
624 e100_write_flush(nic
);
625 /* Wait 10 msec for self-test to complete */
626 set_current_state(TASK_UNINTERRUPTIBLE
);
627 schedule_timeout(HZ
/ 100 + 1);
629 /* Interrupts are enabled after self-test */
630 e100_disable_irq(nic
);
632 /* Check results of self-test */
633 if(nic
->mem
->selftest
.result
!= 0) {
634 DPRINTK(HW
, ERR
, "Self-test failed: result=0x%08X\n",
635 nic
->mem
->selftest
.result
);
638 if(nic
->mem
->selftest
.signature
== 0) {
639 DPRINTK(HW
, ERR
, "Self-test failed: timed out\n");
646 static void e100_eeprom_write(struct nic
*nic
, u16 addr_len
, u16 addr
, u16 data
)
648 u32 cmd_addr_data
[3];
652 /* Three cmds: write/erase enable, write data, write/erase disable */
653 cmd_addr_data
[0] = op_ewen
<< (addr_len
- 2);
654 cmd_addr_data
[1] = (((op_write
<< addr_len
) | addr
) << 16) |
656 cmd_addr_data
[2] = op_ewds
<< (addr_len
- 2);
658 /* Bit-bang cmds to write word to eeprom */
659 for(j
= 0; j
< 3; j
++) {
662 writeb(eecs
| eesk
, &nic
->csr
->eeprom_ctrl_lo
);
663 e100_write_flush(nic
); udelay(4);
665 for(i
= 31; i
>= 0; i
--) {
666 ctrl
= (cmd_addr_data
[j
] & (1 << i
)) ?
668 writeb(ctrl
, &nic
->csr
->eeprom_ctrl_lo
);
669 e100_write_flush(nic
); udelay(4);
671 writeb(ctrl
| eesk
, &nic
->csr
->eeprom_ctrl_lo
);
672 e100_write_flush(nic
); udelay(4);
674 /* Wait 10 msec for cmd to complete */
675 set_current_state(TASK_UNINTERRUPTIBLE
);
676 schedule_timeout(HZ
/ 100 + 1);
679 writeb(0, &nic
->csr
->eeprom_ctrl_lo
);
680 e100_write_flush(nic
); udelay(4);
684 /* General technique stolen from the eepro100 driver - very clever */
685 static u16
e100_eeprom_read(struct nic
*nic
, u16
*addr_len
, u16 addr
)
692 cmd_addr_data
= ((op_read
<< *addr_len
) | addr
) << 16;
695 writeb(eecs
| eesk
, &nic
->csr
->eeprom_ctrl_lo
);
696 e100_write_flush(nic
); udelay(4);
698 /* Bit-bang to read word from eeprom */
699 for(i
= 31; i
>= 0; i
--) {
700 ctrl
= (cmd_addr_data
& (1 << i
)) ? eecs
| eedi
: eecs
;
701 writeb(ctrl
, &nic
->csr
->eeprom_ctrl_lo
);
702 e100_write_flush(nic
); udelay(4);
704 writeb(ctrl
| eesk
, &nic
->csr
->eeprom_ctrl_lo
);
705 e100_write_flush(nic
); udelay(4);
707 /* Eeprom drives a dummy zero to EEDO after receiving
708 * complete address. Use this to adjust addr_len. */
709 ctrl
= readb(&nic
->csr
->eeprom_ctrl_lo
);
710 if(!(ctrl
& eedo
) && i
> 16) {
711 *addr_len
-= (i
- 16);
715 data
= (data
<< 1) | (ctrl
& eedo
? 1 : 0);
719 writeb(0, &nic
->csr
->eeprom_ctrl_lo
);
720 e100_write_flush(nic
); udelay(4);
722 return le16_to_cpu(data
);
725 /* Load entire EEPROM image into driver cache and validate checksum */
726 static int e100_eeprom_load(struct nic
*nic
)
728 u16 addr
, addr_len
= 8, checksum
= 0;
730 /* Try reading with an 8-bit addr len to discover actual addr len */
731 e100_eeprom_read(nic
, &addr_len
, 0);
732 nic
->eeprom_wc
= 1 << addr_len
;
734 for(addr
= 0; addr
< nic
->eeprom_wc
; addr
++) {
735 nic
->eeprom
[addr
] = e100_eeprom_read(nic
, &addr_len
, addr
);
736 if(addr
< nic
->eeprom_wc
- 1)
737 checksum
+= cpu_to_le16(nic
->eeprom
[addr
]);
740 /* The checksum, stored in the last word, is calculated such that
741 * the sum of words should be 0xBABA */
742 checksum
= le16_to_cpu(0xBABA - checksum
);
743 if(checksum
!= nic
->eeprom
[nic
->eeprom_wc
- 1]) {
744 DPRINTK(PROBE
, ERR
, "EEPROM corrupted\n");
751 /* Save (portion of) driver EEPROM cache to device and update checksum */
752 static int e100_eeprom_save(struct nic
*nic
, u16 start
, u16 count
)
754 u16 addr
, addr_len
= 8, checksum
= 0;
756 /* Try reading with an 8-bit addr len to discover actual addr len */
757 e100_eeprom_read(nic
, &addr_len
, 0);
758 nic
->eeprom_wc
= 1 << addr_len
;
760 if(start
+ count
>= nic
->eeprom_wc
)
763 for(addr
= start
; addr
< start
+ count
; addr
++)
764 e100_eeprom_write(nic
, addr_len
, addr
, nic
->eeprom
[addr
]);
766 /* The checksum, stored in the last word, is calculated such that
767 * the sum of words should be 0xBABA */
768 for(addr
= 0; addr
< nic
->eeprom_wc
- 1; addr
++)
769 checksum
+= cpu_to_le16(nic
->eeprom
[addr
]);
770 nic
->eeprom
[nic
->eeprom_wc
- 1] = le16_to_cpu(0xBABA - checksum
);
771 e100_eeprom_write(nic
, addr_len
, nic
->eeprom_wc
- 1,
772 nic
->eeprom
[nic
->eeprom_wc
- 1]);
777 #define E100_WAIT_SCB_TIMEOUT 40
778 static inline int e100_exec_cmd(struct nic
*nic
, u8 cmd
, dma_addr_t dma_addr
)
784 spin_lock_irqsave(&nic
->cmd_lock
, flags
);
786 /* Previous command is accepted when SCB clears */
787 for(i
= 0; i
< E100_WAIT_SCB_TIMEOUT
; i
++) {
788 if(likely(!readb(&nic
->csr
->scb
.cmd_lo
)))
791 if(unlikely(i
> (E100_WAIT_SCB_TIMEOUT
>> 1)))
794 if(unlikely(i
== E100_WAIT_SCB_TIMEOUT
)) {
799 if(unlikely(cmd
!= cuc_resume
))
800 writel(dma_addr
, &nic
->csr
->scb
.gen_ptr
);
801 writeb(cmd
, &nic
->csr
->scb
.cmd_lo
);
804 spin_unlock_irqrestore(&nic
->cmd_lock
, flags
);
809 static inline int e100_exec_cb(struct nic
*nic
, struct sk_buff
*skb
,
810 void (*cb_prepare
)(struct nic
*, struct cb
*, struct sk_buff
*))
816 spin_lock_irqsave(&nic
->cb_lock
, flags
);
818 if(unlikely(!nic
->cbs_avail
)) {
824 nic
->cb_to_use
= cb
->next
;
828 if(unlikely(!nic
->cbs_avail
))
831 cb_prepare(nic
, cb
, skb
);
833 /* Order is important otherwise we'll be in a race with h/w:
834 * set S-bit in current first, then clear S-bit in previous. */
835 cb
->command
|= cpu_to_le16(cb_s
);
837 cb
->prev
->command
&= cpu_to_le16(~cb_s
);
839 while(nic
->cb_to_send
!= nic
->cb_to_use
) {
840 if(unlikely(e100_exec_cmd(nic
, nic
->cuc_cmd
,
841 nic
->cb_to_send
->dma_addr
))) {
842 /* Ok, here's where things get sticky. It's
843 * possible that we can't schedule the command
844 * because the controller is too busy, so
845 * let's just queue the command and try again
846 * when another command is scheduled. */
849 nic
->cuc_cmd
= cuc_resume
;
850 nic
->cb_to_send
= nic
->cb_to_send
->next
;
855 spin_unlock_irqrestore(&nic
->cb_lock
, flags
);
860 static u16
mdio_ctrl(struct nic
*nic
, u32 addr
, u32 dir
, u32 reg
, u16 data
)
865 writel((reg
<< 16) | (addr
<< 21) | dir
| data
, &nic
->csr
->mdi_ctrl
);
867 for(i
= 0; i
< 100; i
++) {
869 if((data_out
= readl(&nic
->csr
->mdi_ctrl
)) & mdi_ready
)
874 "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
875 dir
== mdi_read
? "READ" : "WRITE", addr
, reg
, data
, data_out
);
876 return (u16
)data_out
;
879 static int mdio_read(struct net_device
*netdev
, int addr
, int reg
)
881 return mdio_ctrl(netdev_priv(netdev
), addr
, mdi_read
, reg
, 0);
884 static void mdio_write(struct net_device
*netdev
, int addr
, int reg
, int data
)
886 mdio_ctrl(netdev_priv(netdev
), addr
, mdi_write
, reg
, data
);
889 static void e100_get_defaults(struct nic
*nic
)
891 struct param_range rfds
= { .min
= 64, .max
= 256, .count
= 64 };
892 struct param_range cbs
= { .min
= 64, .max
= 256, .count
= 64 };
894 pci_read_config_byte(nic
->pdev
, PCI_REVISION_ID
, &nic
->rev_id
);
895 /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
896 nic
->mac
= (nic
->flags
& ich
) ? mac_82559_D101M
: nic
->rev_id
;
897 if(nic
->mac
== mac_unknown
)
898 nic
->mac
= mac_82557_D100_A
;
900 nic
->params
.rfds
= rfds
;
901 nic
->params
.cbs
= cbs
;
903 /* Quadwords to DMA into FIFO before starting frame transmit */
904 nic
->tx_threshold
= 0xE0;
906 nic
->tx_command
= cpu_to_le16(cb_tx
| cb_i
| cb_tx_sf
|
907 ((nic
->mac
>= mac_82558_D101_A4
) ? cb_cid
: 0));
909 /* Template for a freshly allocated RFD */
910 nic
->blank_rfd
.command
= cpu_to_le16(cb_el
);
911 nic
->blank_rfd
.rbd
= 0xFFFFFFFF;
912 nic
->blank_rfd
.size
= cpu_to_le16(VLAN_ETH_FRAME_LEN
);
915 nic
->mii
.phy_id_mask
= 0x1F;
916 nic
->mii
.reg_num_mask
= 0x1F;
917 nic
->mii
.dev
= nic
->netdev
;
918 nic
->mii
.mdio_read
= mdio_read
;
919 nic
->mii
.mdio_write
= mdio_write
;
922 static void e100_configure(struct nic
*nic
, struct cb
*cb
, struct sk_buff
*skb
)
924 struct config
*config
= &cb
->u
.config
;
925 u8
*c
= (u8
*)config
;
927 cb
->command
= cpu_to_le16(cb_config
);
929 memset(config
, 0, sizeof(struct config
));
931 config
->byte_count
= 0x16; /* bytes in this struct */
932 config
->rx_fifo_limit
= 0x8; /* bytes in FIFO before DMA */
933 config
->direct_rx_dma
= 0x1; /* reserved */
934 config
->standard_tcb
= 0x1; /* 1=standard, 0=extended */
935 config
->standard_stat_counter
= 0x1; /* 1=standard, 0=extended */
936 config
->rx_discard_short_frames
= 0x1; /* 1=discard, 0=pass */
937 config
->tx_underrun_retry
= 0x3; /* # of underrun retries */
938 config
->mii_mode
= 0x1; /* 1=MII mode, 0=503 mode */
940 config
->no_source_addr_insertion
= 0x1; /* 1=no, 0=yes */
941 config
->preamble_length
= 0x2; /* 0=1, 1=3, 2=7, 3=15 bytes */
942 config
->ifs
= 0x6; /* x16 = inter frame spacing */
943 config
->ip_addr_hi
= 0xF2; /* ARP IP filter - not used */
944 config
->pad15_1
= 0x1;
945 config
->pad15_2
= 0x1;
946 config
->crs_or_cdt
= 0x0; /* 0=CRS only, 1=CRS or CDT */
947 config
->fc_delay_hi
= 0x40; /* time delay for fc frame */
948 config
->tx_padding
= 0x1; /* 1=pad short frames */
949 config
->fc_priority_threshold
= 0x7; /* 7=priority fc disabled */
951 config
->full_duplex_pin
= 0x1; /* 1=examine FDX# pin */
952 config
->pad20_1
= 0x1F;
953 config
->fc_priority_location
= 0x1; /* 1=byte#31, 0=byte#19 */
954 config
->pad21_1
= 0x5;
956 config
->adaptive_ifs
= nic
->adaptive_ifs
;
957 config
->loopback
= nic
->loopback
;
959 if(nic
->mii
.force_media
&& nic
->mii
.full_duplex
)
960 config
->full_duplex_force
= 0x1; /* 1=force, 0=auto */
962 if(nic
->flags
& promiscuous
|| nic
->loopback
) {
963 config
->rx_save_bad_frames
= 0x1; /* 1=save, 0=discard */
964 config
->rx_discard_short_frames
= 0x0; /* 1=discard, 0=save */
965 config
->promiscuous_mode
= 0x1; /* 1=on, 0=off */
968 if(nic
->flags
& multicast_all
)
969 config
->multicast_all
= 0x1; /* 1=accept, 0=no */
971 if(!(nic
->flags
& wol_magic
))
972 config
->magic_packet_disable
= 0x1; /* 1=off, 0=on */
974 if(nic
->mac
>= mac_82558_D101_A4
) {
975 config
->fc_disable
= 0x1; /* 1=Tx fc off, 0=Tx fc on */
976 config
->mwi_enable
= 0x1; /* 1=enable, 0=disable */
977 config
->standard_tcb
= 0x0; /* 1=standard, 0=extended */
978 config
->rx_long_ok
= 0x1; /* 1=VLANs ok, 0=standard */
979 if(nic
->mac
>= mac_82559_D101M
)
980 config
->tno_intr
= 0x1; /* TCO stats enable */
982 config
->standard_stat_counter
= 0x0;
985 DPRINTK(HW
, DEBUG
, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
986 c
[0], c
[1], c
[2], c
[3], c
[4], c
[5], c
[6], c
[7]);
987 DPRINTK(HW
, DEBUG
, "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
988 c
[8], c
[9], c
[10], c
[11], c
[12], c
[13], c
[14], c
[15]);
989 DPRINTK(HW
, DEBUG
, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
990 c
[16], c
[17], c
[18], c
[19], c
[20], c
[21], c
[22], c
[23]);
993 static void e100_load_ucode(struct nic
*nic
, struct cb
*cb
, struct sk_buff
*skb
)
996 static const u32 ucode
[UCODE_SIZE
] = {
997 /* NFS packets are misinterpreted as TCO packets and
998 * incorrectly routed to the BMC over SMBus. This
999 * microcode patch checks the fragmented IP bit in the
1000 * NFS/UDP header to distinguish between NFS and TCO. */
1001 0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF,
1002 0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000,
1003 0x00906EFD, 0x00900EFD, 0x00E00EF8,
1006 if(nic
->mac
== mac_82551_F
|| nic
->mac
== mac_82551_10
) {
1007 for(i
= 0; i
< UCODE_SIZE
; i
++)
1008 cb
->u
.ucode
[i
] = cpu_to_le32(ucode
[i
]);
1009 cb
->command
= cpu_to_le16(cb_ucode
);
1011 cb
->command
= cpu_to_le16(cb_nop
);
1014 static void e100_setup_iaaddr(struct nic
*nic
, struct cb
*cb
,
1015 struct sk_buff
*skb
)
1017 cb
->command
= cpu_to_le16(cb_iaaddr
);
1018 memcpy(cb
->u
.iaaddr
, nic
->netdev
->dev_addr
, ETH_ALEN
);
1021 static void e100_dump(struct nic
*nic
, struct cb
*cb
, struct sk_buff
*skb
)
1023 cb
->command
= cpu_to_le16(cb_dump
);
1024 cb
->u
.dump_buffer_addr
= cpu_to_le32(nic
->dma_addr
+
1025 offsetof(struct mem
, dump_buf
));
1028 #define NCONFIG_AUTO_SWITCH 0x0080
1029 #define MII_NSC_CONG MII_RESV1
1030 #define NSC_CONG_ENABLE 0x0100
1031 #define NSC_CONG_TXREADY 0x0400
1032 #define ADVERTISE_FC_SUPPORTED 0x0400
1033 static int e100_phy_init(struct nic
*nic
)
1035 struct net_device
*netdev
= nic
->netdev
;
1037 u16 bmcr
, stat
, id_lo
, id_hi
, cong
;
1039 /* Discover phy addr by searching addrs in order {1,0,2,..., 31} */
1040 for(addr
= 0; addr
< 32; addr
++) {
1041 nic
->mii
.phy_id
= (addr
== 0) ? 1 : (addr
== 1) ? 0 : addr
;
1042 bmcr
= mdio_read(netdev
, nic
->mii
.phy_id
, MII_BMCR
);
1043 stat
= mdio_read(netdev
, nic
->mii
.phy_id
, MII_BMSR
);
1044 stat
= mdio_read(netdev
, nic
->mii
.phy_id
, MII_BMSR
);
1045 if(!((bmcr
== 0xFFFF) || ((stat
== 0) && (bmcr
== 0))))
1048 DPRINTK(HW
, DEBUG
, "phy_addr = %d\n", nic
->mii
.phy_id
);
1052 /* Selected the phy and isolate the rest */
1053 for(addr
= 0; addr
< 32; addr
++) {
1054 if(addr
!= nic
->mii
.phy_id
) {
1055 mdio_write(netdev
, addr
, MII_BMCR
, BMCR_ISOLATE
);
1057 bmcr
= mdio_read(netdev
, addr
, MII_BMCR
);
1058 mdio_write(netdev
, addr
, MII_BMCR
,
1059 bmcr
& ~BMCR_ISOLATE
);
1064 id_lo
= mdio_read(netdev
, nic
->mii
.phy_id
, MII_PHYSID1
);
1065 id_hi
= mdio_read(netdev
, nic
->mii
.phy_id
, MII_PHYSID2
);
1066 nic
->phy
= (u32
)id_hi
<< 16 | (u32
)id_lo
;
1067 DPRINTK(HW
, DEBUG
, "phy ID = 0x%08X\n", nic
->phy
);
1069 /* Handle National tx phys */
1070 #define NCS_PHY_MODEL_MASK 0xFFF0FFFF
1071 if((nic
->phy
& NCS_PHY_MODEL_MASK
) == phy_nsc_tx
) {
1072 /* Disable congestion control */
1073 cong
= mdio_read(netdev
, nic
->mii
.phy_id
, MII_NSC_CONG
);
1074 cong
|= NSC_CONG_TXREADY
;
1075 cong
&= ~NSC_CONG_ENABLE
;
1076 mdio_write(netdev
, nic
->mii
.phy_id
, MII_NSC_CONG
, cong
);
1079 if((nic
->mac
>= mac_82550_D102
) || ((nic
->flags
& ich
) &&
1080 (mdio_read(netdev
, nic
->mii
.phy_id
, MII_TPISTATUS
) & 0x8000) &&
1081 (nic
->eeprom
[eeprom_cnfg_mdix
] & eeprom_mdix_enabled
)))
1082 /* enable/disable MDI/MDI-X auto-switching */
1083 mdio_write(netdev
, nic
->mii
.phy_id
, MII_NCONFIG
,
1084 nic
->mii
.force_media
? 0 : NCONFIG_AUTO_SWITCH
);
1089 static int e100_hw_init(struct nic
*nic
)
1095 DPRINTK(HW
, ERR
, "e100_hw_init\n");
1096 if(!in_interrupt() && (err
= e100_self_test(nic
)))
1099 if((err
= e100_phy_init(nic
)))
1101 if((err
= e100_exec_cmd(nic
, cuc_load_base
, 0)))
1103 if((err
= e100_exec_cmd(nic
, ruc_load_base
, 0)))
1105 if((err
= e100_exec_cb(nic
, NULL
, e100_load_ucode
)))
1107 if((err
= e100_exec_cb(nic
, NULL
, e100_configure
)))
1109 if((err
= e100_exec_cb(nic
, NULL
, e100_setup_iaaddr
)))
1111 if((err
= e100_exec_cmd(nic
, cuc_dump_addr
,
1112 nic
->dma_addr
+ offsetof(struct mem
, stats
))))
1114 if((err
= e100_exec_cmd(nic
, cuc_dump_reset
, 0)))
1117 e100_disable_irq(nic
);
1122 static void e100_multi(struct nic
*nic
, struct cb
*cb
, struct sk_buff
*skb
)
1124 struct net_device
*netdev
= nic
->netdev
;
1125 struct dev_mc_list
*list
= netdev
->mc_list
;
1126 u16 i
, count
= min(netdev
->mc_count
, E100_MAX_MULTICAST_ADDRS
);
1128 cb
->command
= cpu_to_le16(cb_multi
);
1129 cb
->u
.multi
.count
= cpu_to_le16(count
* ETH_ALEN
);
1130 for(i
= 0; list
&& i
< count
; i
++, list
= list
->next
)
1131 memcpy(&cb
->u
.multi
.addr
[i
*ETH_ALEN
], &list
->dmi_addr
,
1135 static void e100_set_multicast_list(struct net_device
*netdev
)
1137 struct nic
*nic
= netdev_priv(netdev
);
1139 DPRINTK(HW
, DEBUG
, "mc_count=%d, flags=0x%04X\n",
1140 netdev
->mc_count
, netdev
->flags
);
1142 if(netdev
->flags
& IFF_PROMISC
)
1143 nic
->flags
|= promiscuous
;
1145 nic
->flags
&= ~promiscuous
;
1147 if(netdev
->flags
& IFF_ALLMULTI
||
1148 netdev
->mc_count
> E100_MAX_MULTICAST_ADDRS
)
1149 nic
->flags
|= multicast_all
;
1151 nic
->flags
&= ~multicast_all
;
1153 e100_exec_cb(nic
, NULL
, e100_configure
);
1154 e100_exec_cb(nic
, NULL
, e100_multi
);
1157 static void e100_update_stats(struct nic
*nic
)
1159 struct net_device_stats
*ns
= &nic
->net_stats
;
1160 struct stats
*s
= &nic
->mem
->stats
;
1161 u32
*complete
= (nic
->mac
< mac_82558_D101_A4
) ? &s
->fc_xmt_pause
:
1162 (nic
->mac
< mac_82559_D101M
) ? (u32
*)&s
->xmt_tco_frames
:
1165 /* Device's stats reporting may take several microseconds to
1166 * complete, so where always waiting for results of the
1167 * previous command. */
1169 if(*complete
== le32_to_cpu(cuc_dump_reset_complete
)) {
1171 nic
->tx_frames
= le32_to_cpu(s
->tx_good_frames
);
1172 nic
->tx_collisions
= le32_to_cpu(s
->tx_total_collisions
);
1173 ns
->tx_aborted_errors
+= le32_to_cpu(s
->tx_max_collisions
);
1174 ns
->tx_window_errors
+= le32_to_cpu(s
->tx_late_collisions
);
1175 ns
->tx_carrier_errors
+= le32_to_cpu(s
->tx_lost_crs
);
1176 ns
->tx_fifo_errors
+= le32_to_cpu(s
->tx_underruns
);
1177 ns
->collisions
+= nic
->tx_collisions
;
1178 ns
->tx_errors
+= le32_to_cpu(s
->tx_max_collisions
) +
1179 le32_to_cpu(s
->tx_lost_crs
);
1180 ns
->rx_dropped
+= le32_to_cpu(s
->rx_resource_errors
);
1181 ns
->rx_length_errors
+= le32_to_cpu(s
->rx_short_frame_errors
) +
1182 nic
->rx_over_length_errors
;
1183 ns
->rx_crc_errors
+= le32_to_cpu(s
->rx_crc_errors
);
1184 ns
->rx_frame_errors
+= le32_to_cpu(s
->rx_alignment_errors
);
1185 ns
->rx_over_errors
+= le32_to_cpu(s
->rx_overrun_errors
);
1186 ns
->rx_fifo_errors
+= le32_to_cpu(s
->rx_overrun_errors
);
1187 ns
->rx_errors
+= le32_to_cpu(s
->rx_crc_errors
) +
1188 le32_to_cpu(s
->rx_alignment_errors
) +
1189 le32_to_cpu(s
->rx_short_frame_errors
) +
1190 le32_to_cpu(s
->rx_cdt_errors
);
1191 nic
->tx_deferred
+= le32_to_cpu(s
->tx_deferred
);
1192 nic
->tx_single_collisions
+=
1193 le32_to_cpu(s
->tx_single_collisions
);
1194 nic
->tx_multiple_collisions
+=
1195 le32_to_cpu(s
->tx_multiple_collisions
);
1196 if(nic
->mac
>= mac_82558_D101_A4
) {
1197 nic
->tx_fc_pause
+= le32_to_cpu(s
->fc_xmt_pause
);
1198 nic
->rx_fc_pause
+= le32_to_cpu(s
->fc_rcv_pause
);
1199 nic
->rx_fc_unsupported
+=
1200 le32_to_cpu(s
->fc_rcv_unsupported
);
1201 if(nic
->mac
>= mac_82559_D101M
) {
1202 nic
->tx_tco_frames
+=
1203 le16_to_cpu(s
->xmt_tco_frames
);
1204 nic
->rx_tco_frames
+=
1205 le16_to_cpu(s
->rcv_tco_frames
);
1210 e100_exec_cmd(nic
, cuc_dump_reset
, 0);
1213 static void e100_adjust_adaptive_ifs(struct nic
*nic
, int speed
, int duplex
)
1215 /* Adjust inter-frame-spacing (IFS) between two transmits if
1216 * we're getting collisions on a half-duplex connection. */
1218 if(duplex
== DUPLEX_HALF
) {
1219 u32 prev
= nic
->adaptive_ifs
;
1220 u32 min_frames
= (speed
== SPEED_100
) ? 1000 : 100;
1222 if((nic
->tx_frames
/ 32 < nic
->tx_collisions
) &&
1223 (nic
->tx_frames
> min_frames
)) {
1224 if(nic
->adaptive_ifs
< 60)
1225 nic
->adaptive_ifs
+= 5;
1226 } else if (nic
->tx_frames
< min_frames
) {
1227 if(nic
->adaptive_ifs
>= 5)
1228 nic
->adaptive_ifs
-= 5;
1230 if(nic
->adaptive_ifs
!= prev
)
1231 e100_exec_cb(nic
, NULL
, e100_configure
);
1235 static void e100_watchdog(unsigned long data
)
1237 struct nic
*nic
= (struct nic
*)data
;
1238 struct ethtool_cmd cmd
;
1240 DPRINTK(TIMER
, DEBUG
, "right now = %ld\n", jiffies
);
1242 /* mii library handles link maintenance tasks */
1244 mii_ethtool_gset(&nic
->mii
, &cmd
);
1246 if(mii_link_ok(&nic
->mii
) && !netif_carrier_ok(nic
->netdev
)) {
1247 DPRINTK(LINK
, INFO
, "link up, %sMbps, %s-duplex\n",
1248 cmd
.speed
== SPEED_100
? "100" : "10",
1249 cmd
.duplex
== DUPLEX_FULL
? "full" : "half");
1250 } else if(!mii_link_ok(&nic
->mii
) && netif_carrier_ok(nic
->netdev
)) {
1251 DPRINTK(LINK
, INFO
, "link down\n");
1254 mii_check_link(&nic
->mii
);
1256 /* Software generated interrupt to recover from (rare) Rx
1257 * allocation failure */
1258 writeb(irq_sw_gen
, &nic
->csr
->scb
.cmd_hi
);
1259 e100_write_flush(nic
);
1261 e100_update_stats(nic
);
1262 e100_adjust_adaptive_ifs(nic
, cmd
.speed
, cmd
.duplex
);
1264 if(nic
->mac
<= mac_82557_D100_C
)
1265 /* Issue a multicast command to workaround a 557 lock up */
1266 e100_set_multicast_list(nic
->netdev
);
1268 if(nic
->flags
& ich
&& cmd
.speed
==SPEED_10
&& cmd
.duplex
==DUPLEX_HALF
)
1269 /* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
1270 nic
->flags
|= ich_10h_workaround
;
1272 nic
->flags
&= ~ich_10h_workaround
;
1274 mod_timer(&nic
->watchdog
, jiffies
+ E100_WATCHDOG_PERIOD
);
1277 static inline void e100_xmit_prepare(struct nic
*nic
, struct cb
*cb
,
1278 struct sk_buff
*skb
)
1280 cb
->command
= nic
->tx_command
;
1281 cb
->u
.tcb
.tbd_array
= cb
->dma_addr
+ offsetof(struct cb
, u
.tcb
.tbd
);
1282 cb
->u
.tcb
.tcb_byte_count
= 0;
1283 cb
->u
.tcb
.threshold
= nic
->tx_threshold
;
1284 cb
->u
.tcb
.tbd_count
= 1;
1285 cb
->u
.tcb
.tbd
.buf_addr
= cpu_to_le32(pci_map_single(nic
->pdev
,
1286 skb
->data
, skb
->len
, PCI_DMA_TODEVICE
));
1287 cb
->u
.tcb
.tbd
.size
= cpu_to_le16(skb
->len
);
1290 static int e100_xmit_frame(struct sk_buff
*skb
, struct net_device
*netdev
)
1292 struct nic
*nic
= netdev_priv(netdev
);
1295 if(nic
->flags
& ich_10h_workaround
) {
1296 /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang.
1297 Issue a NOP command followed by a 1us delay before
1298 issuing the Tx command. */
1299 e100_exec_cmd(nic
, cuc_nop
, 0);
1303 err
= e100_exec_cb(nic
, skb
, e100_xmit_prepare
);
1307 /* We queued the skb, but now we're out of space. */
1308 netif_stop_queue(netdev
);
1311 /* This is a hard error - log it. */
1312 DPRINTK(TX_ERR
, DEBUG
, "Out of Tx resources, returning skb\n");
1313 netif_stop_queue(netdev
);
1317 netdev
->trans_start
= jiffies
;
1321 static inline int e100_tx_clean(struct nic
*nic
)
1326 spin_lock(&nic
->cb_lock
);
1328 DPRINTK(TX_DONE
, DEBUG
, "cb->status = 0x%04X\n",
1329 nic
->cb_to_clean
->status
);
1331 /* Clean CBs marked complete */
1332 for(cb
= nic
->cb_to_clean
;
1333 cb
->status
& cpu_to_le16(cb_complete
);
1334 cb
= nic
->cb_to_clean
= cb
->next
) {
1335 if(likely(cb
->skb
!= NULL
)) {
1336 nic
->net_stats
.tx_packets
++;
1337 nic
->net_stats
.tx_bytes
+= cb
->skb
->len
;
1339 pci_unmap_single(nic
->pdev
,
1340 le32_to_cpu(cb
->u
.tcb
.tbd
.buf_addr
),
1341 le16_to_cpu(cb
->u
.tcb
.tbd
.size
),
1343 dev_kfree_skb_any(cb
->skb
);
1351 spin_unlock(&nic
->cb_lock
);
1353 /* Recover from running out of Tx resources in xmit_frame */
1354 if(unlikely(tx_cleaned
&& netif_queue_stopped(nic
->netdev
)))
1355 netif_wake_queue(nic
->netdev
);
1360 static void e100_clean_cbs(struct nic
*nic
)
1363 while(nic
->cbs_avail
!= nic
->params
.cbs
.count
) {
1364 struct cb
*cb
= nic
->cb_to_clean
;
1366 pci_unmap_single(nic
->pdev
,
1367 le32_to_cpu(cb
->u
.tcb
.tbd
.buf_addr
),
1368 le16_to_cpu(cb
->u
.tcb
.tbd
.size
),
1370 dev_kfree_skb(cb
->skb
);
1372 nic
->cb_to_clean
= nic
->cb_to_clean
->next
;
1375 pci_free_consistent(nic
->pdev
,
1376 sizeof(struct cb
) * nic
->params
.cbs
.count
,
1377 nic
->cbs
, nic
->cbs_dma_addr
);
1381 nic
->cuc_cmd
= cuc_start
;
1382 nic
->cb_to_use
= nic
->cb_to_send
= nic
->cb_to_clean
=
1386 static int e100_alloc_cbs(struct nic
*nic
)
1389 unsigned int i
, count
= nic
->params
.cbs
.count
;
1391 nic
->cuc_cmd
= cuc_start
;
1392 nic
->cb_to_use
= nic
->cb_to_send
= nic
->cb_to_clean
= NULL
;
1395 nic
->cbs
= pci_alloc_consistent(nic
->pdev
,
1396 sizeof(struct cb
) * count
, &nic
->cbs_dma_addr
);
1400 for(cb
= nic
->cbs
, i
= 0; i
< count
; cb
++, i
++) {
1401 cb
->next
= (i
+ 1 < count
) ? cb
+ 1 : nic
->cbs
;
1402 cb
->prev
= (i
== 0) ? nic
->cbs
+ count
- 1 : cb
- 1;
1404 cb
->dma_addr
= nic
->cbs_dma_addr
+ i
* sizeof(struct cb
);
1405 cb
->link
= cpu_to_le32(nic
->cbs_dma_addr
+
1406 ((i
+1) % count
) * sizeof(struct cb
));
1410 nic
->cb_to_use
= nic
->cb_to_send
= nic
->cb_to_clean
= nic
->cbs
;
1411 nic
->cbs_avail
= count
;
1416 static inline void e100_start_receiver(struct nic
*nic
)
1418 /* (Re)start RU if suspended or idle and RFA is non-NULL */
1419 if(!nic
->ru_running
&& nic
->rx_to_clean
->skb
) {
1420 e100_exec_cmd(nic
, ruc_start
, nic
->rx_to_clean
->dma_addr
);
1421 nic
->ru_running
= 1;
1425 #define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
1426 static inline int e100_rx_alloc_skb(struct nic
*nic
, struct rx
*rx
)
1428 unsigned int rx_offset
= 2; /* u32 align protocol headers */
1430 if(!(rx
->skb
= dev_alloc_skb(RFD_BUF_LEN
+ rx_offset
)))
1433 /* Align, init, and map the RFD. */
1434 rx
->skb
->dev
= nic
->netdev
;
1435 skb_reserve(rx
->skb
, rx_offset
);
1436 memcpy(rx
->skb
->data
, &nic
->blank_rfd
, sizeof(struct rfd
));
1437 rx
->dma_addr
= pci_map_single(nic
->pdev
, rx
->skb
->data
,
1438 RFD_BUF_LEN
, PCI_DMA_BIDIRECTIONAL
);
1440 /* Link the RFD to end of RFA by linking previous RFD to
1441 * this one, and clearing EL bit of previous. */
1443 struct rfd
*prev_rfd
= (struct rfd
*)rx
->prev
->skb
->data
;
1444 put_unaligned(cpu_to_le32(rx
->dma_addr
),
1445 (u32
*)&prev_rfd
->link
);
1447 prev_rfd
->command
&= ~cpu_to_le16(cb_el
);
1448 pci_dma_sync_single_for_device(nic
->pdev
, rx
->prev
->dma_addr
,
1449 sizeof(struct rfd
), PCI_DMA_TODEVICE
);
1455 static inline int e100_rx_indicate(struct nic
*nic
, struct rx
*rx
,
1456 unsigned int *work_done
, unsigned int work_to_do
)
1458 struct sk_buff
*skb
= rx
->skb
;
1459 struct rfd
*rfd
= (struct rfd
*)skb
->data
;
1460 u16 rfd_status
, actual_size
;
1462 if(unlikely(work_done
&& *work_done
>= work_to_do
))
1465 /* Need to sync before taking a peek at cb_complete bit */
1466 pci_dma_sync_single_for_cpu(nic
->pdev
, rx
->dma_addr
,
1467 sizeof(struct rfd
), PCI_DMA_FROMDEVICE
);
1468 rfd_status
= le16_to_cpu(rfd
->status
);
1470 DPRINTK(RX_STATUS
, DEBUG
, "status=0x%04X\n", rfd_status
);
1472 /* If data isn't ready, nothing to indicate */
1473 if(unlikely(!(rfd_status
& cb_complete
)))
1476 /* Get actual data size */
1477 actual_size
= le16_to_cpu(rfd
->actual_size
) & 0x3FFF;
1478 if(unlikely(actual_size
> RFD_BUF_LEN
- sizeof(struct rfd
)))
1479 actual_size
= RFD_BUF_LEN
- sizeof(struct rfd
);
1482 pci_unmap_single(nic
->pdev
, rx
->dma_addr
,
1483 RFD_BUF_LEN
, PCI_DMA_FROMDEVICE
);
1485 /* Pull off the RFD and put the actual data (minus eth hdr) */
1486 skb_reserve(skb
, sizeof(struct rfd
));
1487 skb_put(skb
, actual_size
);
1488 skb
->protocol
= eth_type_trans(skb
, nic
->netdev
);
1490 if(unlikely(!(rfd_status
& cb_ok
))) {
1491 /* Don't indicate if hardware indicates errors */
1492 nic
->net_stats
.rx_dropped
++;
1493 dev_kfree_skb_any(skb
);
1494 } else if(actual_size
> nic
->netdev
->mtu
+ VLAN_ETH_HLEN
) {
1495 /* Don't indicate oversized frames */
1496 nic
->rx_over_length_errors
++;
1497 nic
->net_stats
.rx_dropped
++;
1498 dev_kfree_skb_any(skb
);
1500 nic
->net_stats
.rx_packets
++;
1501 nic
->net_stats
.rx_bytes
+= actual_size
;
1502 nic
->netdev
->last_rx
= jiffies
;
1503 netif_receive_skb(skb
);
1513 static inline void e100_rx_clean(struct nic
*nic
, unsigned int *work_done
,
1514 unsigned int work_to_do
)
1518 /* Indicate newly arrived packets */
1519 for(rx
= nic
->rx_to_clean
; rx
->skb
; rx
= nic
->rx_to_clean
= rx
->next
) {
1520 if(e100_rx_indicate(nic
, rx
, work_done
, work_to_do
))
1521 break; /* No more to clean */
1524 /* Alloc new skbs to refill list */
1525 for(rx
= nic
->rx_to_use
; !rx
->skb
; rx
= nic
->rx_to_use
= rx
->next
) {
1526 if(unlikely(e100_rx_alloc_skb(nic
, rx
)))
1527 break; /* Better luck next time (see watchdog) */
1530 e100_start_receiver(nic
);
1533 static void e100_rx_clean_list(struct nic
*nic
)
1536 unsigned int i
, count
= nic
->params
.rfds
.count
;
1539 for(rx
= nic
->rxs
, i
= 0; i
< count
; rx
++, i
++) {
1541 pci_unmap_single(nic
->pdev
, rx
->dma_addr
,
1542 RFD_BUF_LEN
, PCI_DMA_FROMDEVICE
);
1543 dev_kfree_skb(rx
->skb
);
1550 nic
->rx_to_use
= nic
->rx_to_clean
= NULL
;
1551 nic
->ru_running
= 0;
1554 static int e100_rx_alloc_list(struct nic
*nic
)
1557 unsigned int i
, count
= nic
->params
.rfds
.count
;
1559 nic
->rx_to_use
= nic
->rx_to_clean
= NULL
;
1561 if(!(nic
->rxs
= kmalloc(sizeof(struct rx
) * count
, GFP_ATOMIC
)))
1563 memset(nic
->rxs
, 0, sizeof(struct rx
) * count
);
1565 for(rx
= nic
->rxs
, i
= 0; i
< count
; rx
++, i
++) {
1566 rx
->next
= (i
+ 1 < count
) ? rx
+ 1 : nic
->rxs
;
1567 rx
->prev
= (i
== 0) ? nic
->rxs
+ count
- 1 : rx
- 1;
1568 if(e100_rx_alloc_skb(nic
, rx
)) {
1569 e100_rx_clean_list(nic
);
1574 nic
->rx_to_use
= nic
->rx_to_clean
= nic
->rxs
;
1579 static irqreturn_t
e100_intr(int irq
, void *dev_id
, struct pt_regs
*regs
)
1581 struct net_device
*netdev
= dev_id
;
1582 struct nic
*nic
= netdev_priv(netdev
);
1583 u8 stat_ack
= readb(&nic
->csr
->scb
.stat_ack
);
1585 DPRINTK(INTR
, DEBUG
, "stat_ack = 0x%02X\n", stat_ack
);
1587 if(stat_ack
== stat_ack_not_ours
|| /* Not our interrupt */
1588 stat_ack
== stat_ack_not_present
) /* Hardware is ejected */
1591 /* Ack interrupt(s) */
1592 writeb(stat_ack
, &nic
->csr
->scb
.stat_ack
);
1594 /* We hit Receive No Resource (RNR); restart RU after cleaning */
1595 if(stat_ack
& stat_ack_rnr
)
1596 nic
->ru_running
= 0;
1598 e100_disable_irq(nic
);
1599 netif_rx_schedule(netdev
);
1604 static int e100_poll(struct net_device
*netdev
, int *budget
)
1606 struct nic
*nic
= netdev_priv(netdev
);
1607 unsigned int work_to_do
= min(netdev
->quota
, *budget
);
1608 unsigned int work_done
= 0;
1611 e100_rx_clean(nic
, &work_done
, work_to_do
);
1612 tx_cleaned
= e100_tx_clean(nic
);
1614 /* If no Rx and Tx cleanup work was done, exit polling mode. */
1615 if((!tx_cleaned
&& (work_done
== 0)) || !netif_running(netdev
)) {
1616 netif_rx_complete(netdev
);
1617 e100_enable_irq(nic
);
1621 *budget
-= work_done
;
1622 netdev
->quota
-= work_done
;
1627 #ifdef CONFIG_NET_POLL_CONTROLLER
1628 static void e100_netpoll(struct net_device
*netdev
)
1630 struct nic
*nic
= netdev_priv(netdev
);
1631 e100_disable_irq(nic
);
1632 e100_intr(nic
->pdev
->irq
, netdev
, NULL
);
1633 e100_enable_irq(nic
);
1637 static struct net_device_stats
*e100_get_stats(struct net_device
*netdev
)
1639 struct nic
*nic
= netdev_priv(netdev
);
1640 return &nic
->net_stats
;
1643 static int e100_set_mac_address(struct net_device
*netdev
, void *p
)
1645 struct nic
*nic
= netdev_priv(netdev
);
1646 struct sockaddr
*addr
= p
;
1648 if (!is_valid_ether_addr(addr
->sa_data
))
1649 return -EADDRNOTAVAIL
;
1651 memcpy(netdev
->dev_addr
, addr
->sa_data
, netdev
->addr_len
);
1652 e100_exec_cb(nic
, NULL
, e100_setup_iaaddr
);
1657 static int e100_change_mtu(struct net_device
*netdev
, int new_mtu
)
1659 if(new_mtu
< ETH_ZLEN
|| new_mtu
> ETH_DATA_LEN
)
1661 netdev
->mtu
= new_mtu
;
1665 static int e100_asf(struct nic
*nic
)
1667 /* ASF can be enabled from eeprom */
1668 return((nic
->pdev
->device
>= 0x1050) && (nic
->pdev
->device
<= 0x1057) &&
1669 (nic
->eeprom
[eeprom_config_asf
] & eeprom_asf
) &&
1670 !(nic
->eeprom
[eeprom_config_asf
] & eeprom_gcl
) &&
1671 ((nic
->eeprom
[eeprom_smbus_addr
] & 0xFF) != 0xFE));
1674 static int e100_up(struct nic
*nic
)
1678 if((err
= e100_rx_alloc_list(nic
)))
1680 if((err
= e100_alloc_cbs(nic
)))
1681 goto err_rx_clean_list
;
1682 if((err
= e100_hw_init(nic
)))
1684 e100_set_multicast_list(nic
->netdev
);
1685 e100_start_receiver(nic
);
1686 mod_timer(&nic
->watchdog
, jiffies
);
1687 if((err
= request_irq(nic
->pdev
->irq
, e100_intr
, SA_SHIRQ
,
1688 nic
->netdev
->name
, nic
->netdev
)))
1690 e100_enable_irq(nic
);
1691 netif_wake_queue(nic
->netdev
);
1695 del_timer_sync(&nic
->watchdog
);
1697 e100_clean_cbs(nic
);
1699 e100_rx_clean_list(nic
);
1703 static void e100_down(struct nic
*nic
)
1706 free_irq(nic
->pdev
->irq
, nic
->netdev
);
1707 del_timer_sync(&nic
->watchdog
);
1708 netif_carrier_off(nic
->netdev
);
1709 netif_stop_queue(nic
->netdev
);
1710 e100_clean_cbs(nic
);
1711 e100_rx_clean_list(nic
);
1714 static void e100_tx_timeout(struct net_device
*netdev
)
1716 struct nic
*nic
= netdev_priv(netdev
);
1718 DPRINTK(TX_ERR
, DEBUG
, "scb.status=0x%02X\n",
1719 readb(&nic
->csr
->scb
.status
));
1720 e100_down(netdev_priv(netdev
));
1721 e100_up(netdev_priv(netdev
));
1724 static int e100_loopback_test(struct nic
*nic
, enum loopback loopback_mode
)
1727 struct sk_buff
*skb
;
1729 /* Use driver resources to perform internal MAC or PHY
1730 * loopback test. A single packet is prepared and transmitted
1731 * in loopback mode, and the test passes if the received
1732 * packet compares byte-for-byte to the transmitted packet. */
1734 if((err
= e100_rx_alloc_list(nic
)))
1736 if((err
= e100_alloc_cbs(nic
)))
1739 /* ICH PHY loopback is broken so do MAC loopback instead */
1740 if(nic
->flags
& ich
&& loopback_mode
== lb_phy
)
1741 loopback_mode
= lb_mac
;
1743 nic
->loopback
= loopback_mode
;
1744 if((err
= e100_hw_init(nic
)))
1745 goto err_loopback_none
;
1747 if(loopback_mode
== lb_phy
)
1748 mdio_write(nic
->netdev
, nic
->mii
.phy_id
, MII_BMCR
,
1751 e100_start_receiver(nic
);
1753 if(!(skb
= dev_alloc_skb(ETH_DATA_LEN
))) {
1755 goto err_loopback_none
;
1757 skb_put(skb
, ETH_DATA_LEN
);
1758 memset(skb
->data
, 0xFF, ETH_DATA_LEN
);
1759 e100_xmit_frame(skb
, nic
->netdev
);
1761 set_current_state(TASK_UNINTERRUPTIBLE
);
1762 schedule_timeout(HZ
/ 100 + 1);
1764 if(memcmp(nic
->rx_to_clean
->skb
->data
+ sizeof(struct rfd
),
1765 skb
->data
, ETH_DATA_LEN
))
1769 mdio_write(nic
->netdev
, nic
->mii
.phy_id
, MII_BMCR
, 0);
1770 nic
->loopback
= lb_none
;
1772 e100_clean_cbs(nic
);
1774 e100_rx_clean_list(nic
);
1778 #define MII_LED_CONTROL 0x1B
1779 static void e100_blink_led(unsigned long data
)
1781 struct nic
*nic
= (struct nic
*)data
;
1789 nic
->leds
= (nic
->leds
& led_on
) ? led_off
:
1790 (nic
->mac
< mac_82559_D101M
) ? led_on_557
: led_on_559
;
1791 mdio_write(nic
->netdev
, nic
->mii
.phy_id
, MII_LED_CONTROL
, nic
->leds
);
1792 mod_timer(&nic
->blink_timer
, jiffies
+ HZ
/ 4);
1795 static int e100_get_settings(struct net_device
*netdev
, struct ethtool_cmd
*cmd
)
1797 struct nic
*nic
= netdev_priv(netdev
);
1798 return mii_ethtool_gset(&nic
->mii
, cmd
);
1801 static int e100_set_settings(struct net_device
*netdev
, struct ethtool_cmd
*cmd
)
1803 struct nic
*nic
= netdev_priv(netdev
);
1806 mdio_write(netdev
, nic
->mii
.phy_id
, MII_BMCR
, BMCR_RESET
);
1807 err
= mii_ethtool_sset(&nic
->mii
, cmd
);
1808 e100_exec_cb(nic
, NULL
, e100_configure
);
1813 static void e100_get_drvinfo(struct net_device
*netdev
,
1814 struct ethtool_drvinfo
*info
)
1816 struct nic
*nic
= netdev_priv(netdev
);
1817 strcpy(info
->driver
, DRV_NAME
);
1818 strcpy(info
->version
, DRV_VERSION
);
1819 strcpy(info
->fw_version
, "N/A");
1820 strcpy(info
->bus_info
, pci_name(nic
->pdev
));
1823 static int e100_get_regs_len(struct net_device
*netdev
)
1825 struct nic
*nic
= netdev_priv(netdev
);
1826 #define E100_PHY_REGS 0x1C
1827 #define E100_REGS_LEN 1 + E100_PHY_REGS + \
1828 sizeof(nic->mem->dump_buf) / sizeof(u32)
1829 return E100_REGS_LEN
* sizeof(u32
);
1832 static void e100_get_regs(struct net_device
*netdev
,
1833 struct ethtool_regs
*regs
, void *p
)
1835 struct nic
*nic
= netdev_priv(netdev
);
1839 regs
->version
= (1 << 24) | nic
->rev_id
;
1840 buff
[0] = readb(&nic
->csr
->scb
.cmd_hi
) << 24 |
1841 readb(&nic
->csr
->scb
.cmd_lo
) << 16 |
1842 readw(&nic
->csr
->scb
.status
);
1843 for(i
= E100_PHY_REGS
; i
>= 0; i
--)
1844 buff
[1 + E100_PHY_REGS
- i
] =
1845 mdio_read(netdev
, nic
->mii
.phy_id
, i
);
1846 memset(nic
->mem
->dump_buf
, 0, sizeof(nic
->mem
->dump_buf
));
1847 e100_exec_cb(nic
, NULL
, e100_dump
);
1848 set_current_state(TASK_UNINTERRUPTIBLE
);
1849 schedule_timeout(HZ
/ 100 + 1);
1850 memcpy(&buff
[2 + E100_PHY_REGS
], nic
->mem
->dump_buf
,
1851 sizeof(nic
->mem
->dump_buf
));
1854 static void e100_get_wol(struct net_device
*netdev
, struct ethtool_wolinfo
*wol
)
1856 struct nic
*nic
= netdev_priv(netdev
);
1857 wol
->supported
= (nic
->mac
>= mac_82558_D101_A4
) ? WAKE_MAGIC
: 0;
1858 wol
->wolopts
= (nic
->flags
& wol_magic
) ? WAKE_MAGIC
: 0;
1861 static int e100_set_wol(struct net_device
*netdev
, struct ethtool_wolinfo
*wol
)
1863 struct nic
*nic
= netdev_priv(netdev
);
1865 if(wol
->wolopts
!= WAKE_MAGIC
&& wol
->wolopts
!= 0)
1869 nic
->flags
|= wol_magic
;
1871 nic
->flags
&= ~wol_magic
;
1873 pci_enable_wake(nic
->pdev
, 0, nic
->flags
& (wol_magic
| e100_asf(nic
)));
1874 e100_exec_cb(nic
, NULL
, e100_configure
);
1879 static u32
e100_get_msglevel(struct net_device
*netdev
)
1881 struct nic
*nic
= netdev_priv(netdev
);
1882 return nic
->msg_enable
;
1885 static void e100_set_msglevel(struct net_device
*netdev
, u32 value
)
1887 struct nic
*nic
= netdev_priv(netdev
);
1888 nic
->msg_enable
= value
;
1891 static int e100_nway_reset(struct net_device
*netdev
)
1893 struct nic
*nic
= netdev_priv(netdev
);
1894 return mii_nway_restart(&nic
->mii
);
1897 static u32
e100_get_link(struct net_device
*netdev
)
1899 struct nic
*nic
= netdev_priv(netdev
);
1900 return mii_link_ok(&nic
->mii
);
1903 static int e100_get_eeprom_len(struct net_device
*netdev
)
1905 struct nic
*nic
= netdev_priv(netdev
);
1906 return nic
->eeprom_wc
<< 1;
1909 #define E100_EEPROM_MAGIC 0x1234
1910 static int e100_get_eeprom(struct net_device
*netdev
,
1911 struct ethtool_eeprom
*eeprom
, u8
*bytes
)
1913 struct nic
*nic
= netdev_priv(netdev
);
1915 eeprom
->magic
= E100_EEPROM_MAGIC
;
1916 memcpy(bytes
, &((u8
*)nic
->eeprom
)[eeprom
->offset
], eeprom
->len
);
1921 static int e100_set_eeprom(struct net_device
*netdev
,
1922 struct ethtool_eeprom
*eeprom
, u8
*bytes
)
1924 struct nic
*nic
= netdev_priv(netdev
);
1926 if(eeprom
->magic
!= E100_EEPROM_MAGIC
)
1929 memcpy(&((u8
*)nic
->eeprom
)[eeprom
->offset
], bytes
, eeprom
->len
);
1931 return e100_eeprom_save(nic
, eeprom
->offset
>> 1,
1932 (eeprom
->len
>> 1) + 1);
1935 static void e100_get_ringparam(struct net_device
*netdev
,
1936 struct ethtool_ringparam
*ring
)
1938 struct nic
*nic
= netdev_priv(netdev
);
1939 struct param_range
*rfds
= &nic
->params
.rfds
;
1940 struct param_range
*cbs
= &nic
->params
.cbs
;
1942 ring
->rx_max_pending
= rfds
->max
;
1943 ring
->tx_max_pending
= cbs
->max
;
1944 ring
->rx_mini_max_pending
= 0;
1945 ring
->rx_jumbo_max_pending
= 0;
1946 ring
->rx_pending
= rfds
->count
;
1947 ring
->tx_pending
= cbs
->count
;
1948 ring
->rx_mini_pending
= 0;
1949 ring
->rx_jumbo_pending
= 0;
1952 static int e100_set_ringparam(struct net_device
*netdev
,
1953 struct ethtool_ringparam
*ring
)
1955 struct nic
*nic
= netdev_priv(netdev
);
1956 struct param_range
*rfds
= &nic
->params
.rfds
;
1957 struct param_range
*cbs
= &nic
->params
.cbs
;
1959 if(netif_running(netdev
))
1961 rfds
->count
= max(ring
->rx_pending
, rfds
->min
);
1962 rfds
->count
= min(rfds
->count
, rfds
->max
);
1963 cbs
->count
= max(ring
->tx_pending
, cbs
->min
);
1964 cbs
->count
= min(cbs
->count
, cbs
->max
);
1965 if(netif_running(netdev
))
1971 static const char e100_gstrings_test
[][ETH_GSTRING_LEN
] = {
1972 "Link test (on/offline)",
1973 "Eeprom test (on/offline)",
1974 "Self test (offline)",
1975 "Mac loopback (offline)",
1976 "Phy loopback (offline)",
1978 #define E100_TEST_LEN sizeof(e100_gstrings_test) / ETH_GSTRING_LEN
1980 static int e100_diag_test_count(struct net_device
*netdev
)
1982 return E100_TEST_LEN
;
1985 static void e100_diag_test(struct net_device
*netdev
,
1986 struct ethtool_test
*test
, u64
*data
)
1988 struct ethtool_cmd cmd
;
1989 struct nic
*nic
= netdev_priv(netdev
);
1992 memset(data
, 0, E100_TEST_LEN
* sizeof(u64
));
1993 data
[0] = !mii_link_ok(&nic
->mii
);
1994 data
[1] = e100_eeprom_load(nic
);
1995 if(test
->flags
& ETH_TEST_FL_OFFLINE
) {
1997 /* save speed, duplex & autoneg settings */
1998 err
= mii_ethtool_gset(&nic
->mii
, &cmd
);
2000 if(netif_running(netdev
))
2002 data
[2] = e100_self_test(nic
);
2003 data
[3] = e100_loopback_test(nic
, lb_mac
);
2004 data
[4] = e100_loopback_test(nic
, lb_phy
);
2006 /* restore speed, duplex & autoneg settings */
2007 err
= mii_ethtool_sset(&nic
->mii
, &cmd
);
2009 if(netif_running(netdev
))
2012 for(i
= 0; i
< E100_TEST_LEN
; i
++)
2013 test
->flags
|= data
[i
] ? ETH_TEST_FL_FAILED
: 0;
2016 static int e100_phys_id(struct net_device
*netdev
, u32 data
)
2018 struct nic
*nic
= netdev_priv(netdev
);
2020 if(!data
|| data
> (u32
)(MAX_SCHEDULE_TIMEOUT
/ HZ
))
2021 data
= (u32
)(MAX_SCHEDULE_TIMEOUT
/ HZ
);
2022 mod_timer(&nic
->blink_timer
, jiffies
);
2023 set_current_state(TASK_INTERRUPTIBLE
);
2024 schedule_timeout(data
* HZ
);
2025 del_timer_sync(&nic
->blink_timer
);
2026 mdio_write(netdev
, nic
->mii
.phy_id
, MII_LED_CONTROL
, 0);
2031 static const char e100_gstrings_stats
[][ETH_GSTRING_LEN
] = {
2032 "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
2033 "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
2034 "rx_length_errors", "rx_over_errors", "rx_crc_errors",
2035 "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
2036 "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
2037 "tx_heartbeat_errors", "tx_window_errors",
2038 /* device-specific stats */
2039 "tx_deferred", "tx_single_collisions", "tx_multi_collisions",
2040 "tx_flow_control_pause", "rx_flow_control_pause",
2041 "rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets",
2043 #define E100_NET_STATS_LEN 21
2044 #define E100_STATS_LEN sizeof(e100_gstrings_stats) / ETH_GSTRING_LEN
2046 static int e100_get_stats_count(struct net_device
*netdev
)
2048 return E100_STATS_LEN
;
2051 static void e100_get_ethtool_stats(struct net_device
*netdev
,
2052 struct ethtool_stats
*stats
, u64
*data
)
2054 struct nic
*nic
= netdev_priv(netdev
);
2057 for(i
= 0; i
< E100_NET_STATS_LEN
; i
++)
2058 data
[i
] = ((unsigned long *)&nic
->net_stats
)[i
];
2060 data
[i
++] = nic
->tx_deferred
;
2061 data
[i
++] = nic
->tx_single_collisions
;
2062 data
[i
++] = nic
->tx_multiple_collisions
;
2063 data
[i
++] = nic
->tx_fc_pause
;
2064 data
[i
++] = nic
->rx_fc_pause
;
2065 data
[i
++] = nic
->rx_fc_unsupported
;
2066 data
[i
++] = nic
->tx_tco_frames
;
2067 data
[i
++] = nic
->rx_tco_frames
;
2070 static void e100_get_strings(struct net_device
*netdev
, u32 stringset
, u8
*data
)
2074 memcpy(data
, *e100_gstrings_test
, sizeof(e100_gstrings_test
));
2077 memcpy(data
, *e100_gstrings_stats
, sizeof(e100_gstrings_stats
));
2082 static struct ethtool_ops e100_ethtool_ops
= {
2083 .get_settings
= e100_get_settings
,
2084 .set_settings
= e100_set_settings
,
2085 .get_drvinfo
= e100_get_drvinfo
,
2086 .get_regs_len
= e100_get_regs_len
,
2087 .get_regs
= e100_get_regs
,
2088 .get_wol
= e100_get_wol
,
2089 .set_wol
= e100_set_wol
,
2090 .get_msglevel
= e100_get_msglevel
,
2091 .set_msglevel
= e100_set_msglevel
,
2092 .nway_reset
= e100_nway_reset
,
2093 .get_link
= e100_get_link
,
2094 .get_eeprom_len
= e100_get_eeprom_len
,
2095 .get_eeprom
= e100_get_eeprom
,
2096 .set_eeprom
= e100_set_eeprom
,
2097 .get_ringparam
= e100_get_ringparam
,
2098 .set_ringparam
= e100_set_ringparam
,
2099 .self_test_count
= e100_diag_test_count
,
2100 .self_test
= e100_diag_test
,
2101 .get_strings
= e100_get_strings
,
2102 .phys_id
= e100_phys_id
,
2103 .get_stats_count
= e100_get_stats_count
,
2104 .get_ethtool_stats
= e100_get_ethtool_stats
,
2107 static int e100_do_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
2109 struct nic
*nic
= netdev_priv(netdev
);
2111 return generic_mii_ioctl(&nic
->mii
, if_mii(ifr
), cmd
, NULL
);
2114 static int e100_alloc(struct nic
*nic
)
2116 nic
->mem
= pci_alloc_consistent(nic
->pdev
, sizeof(struct mem
),
2118 return nic
->mem
? 0 : -ENOMEM
;
2121 static void e100_free(struct nic
*nic
)
2124 pci_free_consistent(nic
->pdev
, sizeof(struct mem
),
2125 nic
->mem
, nic
->dma_addr
);
2130 static int e100_open(struct net_device
*netdev
)
2132 struct nic
*nic
= netdev_priv(netdev
);
2135 netif_carrier_off(netdev
);
2136 if((err
= e100_up(nic
)))
2137 DPRINTK(IFUP
, ERR
, "Cannot open interface, aborting.\n");
2141 static int e100_close(struct net_device
*netdev
)
2143 e100_down(netdev_priv(netdev
));
2147 static int __devinit
e100_probe(struct pci_dev
*pdev
,
2148 const struct pci_device_id
*ent
)
2150 struct net_device
*netdev
;
2154 if(!(netdev
= alloc_etherdev(sizeof(struct nic
)))) {
2155 if(((1 << debug
) - 1) & NETIF_MSG_PROBE
)
2156 printk(KERN_ERR PFX
"Etherdev alloc failed, abort.\n");
2160 netdev
->open
= e100_open
;
2161 netdev
->stop
= e100_close
;
2162 netdev
->hard_start_xmit
= e100_xmit_frame
;
2163 netdev
->get_stats
= e100_get_stats
;
2164 netdev
->set_multicast_list
= e100_set_multicast_list
;
2165 netdev
->set_mac_address
= e100_set_mac_address
;
2166 netdev
->change_mtu
= e100_change_mtu
;
2167 netdev
->do_ioctl
= e100_do_ioctl
;
2168 SET_ETHTOOL_OPS(netdev
, &e100_ethtool_ops
);
2169 netdev
->tx_timeout
= e100_tx_timeout
;
2170 netdev
->watchdog_timeo
= E100_WATCHDOG_PERIOD
;
2171 netdev
->poll
= e100_poll
;
2172 netdev
->weight
= E100_NAPI_WEIGHT
;
2173 #ifdef CONFIG_NET_POLL_CONTROLLER
2174 netdev
->poll_controller
= e100_netpoll
;
2177 nic
= netdev_priv(netdev
);
2178 nic
->netdev
= netdev
;
2180 nic
->msg_enable
= (1 << debug
) - 1;
2181 pci_set_drvdata(pdev
, netdev
);
2183 if((err
= pci_enable_device(pdev
))) {
2184 DPRINTK(PROBE
, ERR
, "Cannot enable PCI device, aborting.\n");
2185 goto err_out_free_dev
;
2188 if(!(pci_resource_flags(pdev
, 0) & IORESOURCE_MEM
)) {
2189 DPRINTK(PROBE
, ERR
, "Cannot find proper PCI device "
2190 "base address, aborting.\n");
2192 goto err_out_disable_pdev
;
2195 if((err
= pci_request_regions(pdev
, DRV_NAME
))) {
2196 DPRINTK(PROBE
, ERR
, "Cannot obtain PCI resources, aborting.\n");
2197 goto err_out_disable_pdev
;
2200 pci_set_master(pdev
);
2202 if((err
= pci_set_dma_mask(pdev
, 0xFFFFFFFFULL
))) {
2203 DPRINTK(PROBE
, ERR
, "No usable DMA configuration, aborting.\n");
2204 goto err_out_free_res
;
2207 SET_MODULE_OWNER(netdev
);
2208 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
2210 nic
->csr
= ioremap(pci_resource_start(pdev
, 0), sizeof(struct csr
));
2212 DPRINTK(PROBE
, ERR
, "Cannot map device registers, aborting.\n");
2214 goto err_out_free_res
;
2217 if(ent
->driver_data
)
2222 spin_lock_init(&nic
->cb_lock
);
2223 spin_lock_init(&nic
->cmd_lock
);
2225 init_timer(&nic
->watchdog
);
2226 nic
->watchdog
.function
= e100_watchdog
;
2227 nic
->watchdog
.data
= (unsigned long)nic
;
2228 init_timer(&nic
->blink_timer
);
2229 nic
->blink_timer
.function
= e100_blink_led
;
2230 nic
->blink_timer
.data
= (unsigned long)nic
;
2232 if((err
= e100_alloc(nic
))) {
2233 DPRINTK(PROBE
, ERR
, "Cannot alloc driver memory, aborting.\n");
2234 goto err_out_iounmap
;
2237 e100_get_defaults(nic
);
2241 if((err
= e100_eeprom_load(nic
)))
2244 memcpy(netdev
->dev_addr
, nic
->eeprom
, ETH_ALEN
);
2245 if(!is_valid_ether_addr(netdev
->dev_addr
)) {
2246 DPRINTK(PROBE
, ERR
, "Invalid MAC address from "
2247 "EEPROM, aborting.\n");
2252 /* Wol magic packet can be enabled from eeprom */
2253 if((nic
->mac
>= mac_82558_D101_A4
) &&
2254 (nic
->eeprom
[eeprom_id
] & eeprom_id_wol
))
2255 nic
->flags
|= wol_magic
;
2257 pci_enable_wake(pdev
, 0, nic
->flags
& (wol_magic
| e100_asf(nic
)));
2259 if((err
= register_netdev(netdev
))) {
2260 DPRINTK(PROBE
, ERR
, "Cannot register net device, aborting.\n");
2264 DPRINTK(PROBE
, INFO
, "addr 0x%lx, irq %d, "
2265 "MAC addr %02X:%02X:%02X:%02X:%02X:%02X\n",
2266 pci_resource_start(pdev
, 0), pdev
->irq
,
2267 netdev
->dev_addr
[0], netdev
->dev_addr
[1], netdev
->dev_addr
[2],
2268 netdev
->dev_addr
[3], netdev
->dev_addr
[4], netdev
->dev_addr
[5]);
2277 pci_release_regions(pdev
);
2278 err_out_disable_pdev
:
2279 pci_disable_device(pdev
);
2281 pci_set_drvdata(pdev
, NULL
);
2282 free_netdev(netdev
);
2286 static void __devexit
e100_remove(struct pci_dev
*pdev
)
2288 struct net_device
*netdev
= pci_get_drvdata(pdev
);
2291 struct nic
*nic
= netdev_priv(netdev
);
2292 unregister_netdev(netdev
);
2295 free_netdev(netdev
);
2296 pci_release_regions(pdev
);
2297 pci_disable_device(pdev
);
2298 pci_set_drvdata(pdev
, NULL
);
2303 static int e100_suspend(struct pci_dev
*pdev
, u32 state
)
2305 struct net_device
*netdev
= pci_get_drvdata(pdev
);
2306 struct nic
*nic
= netdev_priv(netdev
);
2308 if(netif_running(netdev
))
2311 netif_device_detach(netdev
);
2313 pci_save_state(pdev
, nic
->pm_state
);
2314 pci_enable_wake(pdev
, state
, nic
->flags
& (wol_magic
| e100_asf(nic
)));
2315 pci_disable_device(pdev
);
2316 pci_set_power_state(pdev
, state
);
2321 static int e100_resume(struct pci_dev
*pdev
)
2323 struct net_device
*netdev
= pci_get_drvdata(pdev
);
2324 struct nic
*nic
= netdev_priv(netdev
);
2326 pci_set_power_state(pdev
, 0);
2327 pci_restore_state(pdev
, nic
->pm_state
);
2330 netif_device_attach(netdev
);
2331 if(netif_running(netdev
))
2338 static struct pci_driver e100_driver
= {
2340 .id_table
= e100_id_table
,
2341 .probe
= e100_probe
,
2342 .remove
= __devexit_p(e100_remove
),
2344 .suspend
= e100_suspend
,
2345 .resume
= e100_resume
,
2349 static int __init
e100_init_module(void)
2351 if(((1 << debug
) - 1) & NETIF_MSG_DRV
) {
2352 printk(KERN_INFO PFX
"%s, %s\n", DRV_DESCRIPTION
, DRV_VERSION
);
2353 printk(KERN_INFO PFX
"%s\n", DRV_COPYRIGHT
);
2355 return pci_module_init(&e100_driver
);
2358 static void __exit
e100_cleanup_module(void)
2360 pci_unregister_driver(&e100_driver
);
2363 module_init(e100_init_module
);
2364 module_exit(e100_cleanup_module
);