drivers/usb/serial/keyspan_usa90msg.h

   1 /*
   2         usa90msg.h
   3
   4         Copyright (c) 1998-2003 InnoSys Incorporated.  All Rights Reserved
   5         This file is available under a BSD-style copyright
   6
   7         Keyspan USB Async Message Formats for the USA19HS
   8
   9         Redistribution and use in source and binary forms, with or without
  10         modification, are permitted provided that the following conditions are
  11         met:
  12
  13         1. Redistributions of source code must retain this licence text
  14         without modification, this list of conditions, and the following
  15         disclaimer.  The following copyright notice must appear immediately at
  16         the beginning of all source files:
  17
  18                 Copyright (c) 1998-2003 InnoSys Incorporated.  All Rights Reserved
  19
  20                 This file is available under a BSD-style copyright
  21
  22         2. The name of InnoSys Incorprated may not be used to endorse or promote
  23         products derived from this software without specific prior written
  24         permission.
  25
  26         THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
  27         IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  28         OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
  29         NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
  30         INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  31         (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  32         SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  33         CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  34         LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  35         OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  36         SUCH DAMAGE.
  37
  38         Revisions:
  39
  40         2003feb14               add setTxMode/txMode  and cancelRxXoff to portControl
  41         2003mar21               change name of PARITY_0/1 to add MARK/SPACE
  42 */
  43
  44 #ifndef __USA90MSG__
  45 #define __USA90MSG__
  46
  47 struct keyspan_usa90_portControlMessage
  48 {
  49         /*
  50                 there are three types of "commands" sent in the control message:
  51
  52                 1.      configuration changes which must be requested by setting
  53                         the corresponding "set" flag (and should only be requested
  54                         when necessary, to reduce overhead on the device):
  55         */
  56
  57         u8      setClocking,    // host requests baud rate be set
  58                 baudLo,                 // host does baud divisor calculation
  59                 baudHi,                 // host does baud divisor calculation
  60
  61                 setLcr,                 // host requests lcr be set
  62                 lcr,                    // use PARITY, STOPBITS, DATABITS below
  63
  64                 setRxMode,              // set receive mode
  65                 rxMode,                 // RXMODE_DMA or RXMODE_BYHAND
  66
  67                 setTxMode,              // set transmit mode
  68                 txMode,                 // TXMODE_DMA or TXMODE_BYHAND
  69
  70                 setTxFlowControl,       // host requests tx flow control be set
  71                 txFlowControl   ,       // use TX_FLOW... bits below
  72                 setRxFlowControl,       // host requests rx flow control be set
  73                 rxFlowControl,  // use RX_FLOW... bits below
  74                 sendXoff,               // host requests XOFF transmitted immediately
  75                 sendXon,                // host requests XON char transmitted
  76                 xonChar,                // specified in current character format
  77                 xoffChar,               // specified in current character format
  78
  79                 sendChar,               // host requests char transmitted immediately
  80                 txChar,                 // character to send
  81
  82                 setRts,                 // host requests RTS output be set
  83                 rts,                    // 1=on, 0=off
  84                 setDtr,                 // host requests DTR output be set
  85                 dtr;                    // 1=on, 0=off
  86
  87
  88         /*
  89                 2.      configuration data which is simply used as is
  90                         and must be specified correctly in every host message.
  91         */
  92
  93         u8      rxForwardingLength,  // forward when this number of chars available
  94                 rxForwardingTimeout, // (1-31 in ms)
  95                 txAckSetting;      // 0=don't ack, 1=normal, 2-255 TBD...
  96         /*
  97                 3.      Firmware states which cause actions if they change
  98                 and must be specified correctly in every host message.
  99         */
 100
 101         u8      portEnabled,    // 0=disabled, 1=enabled
 102                 txFlush,                // 0=normal, 1=toss outbound data
 103                 txBreak,                // 0=break off, 1=break on
 104                 loopbackMode;   // 0=no loopback, 1=loopback enabled
 105
 106         /*
 107                 4.      commands which are flags only; these are processed in order
 108                         (so that, e.g., if rxFlush and rxForward flags are set, the
 109                         port will have no data to forward); any non-zero value
 110                         is respected
 111         */
 112
 113         u8      rxFlush,                // toss inbound data
 114                 rxForward,              // forward all inbound data, NOW (as if fwdLen==1)
 115                 cancelRxXoff,   // cancel any receive XOFF state (_txXoff)
 116                 returnStatus;   // return current status NOW
 117 };
 118
 119 // defines for bits in lcr
 120 #define         USA_DATABITS_5          0x00
 121 #define         USA_DATABITS_6          0x01
 122 #define         USA_DATABITS_7          0x02
 123 #define         USA_DATABITS_8          0x03
 124 #define         STOPBITS_5678_1         0x00    // 1 stop bit for all byte sizes
 125 #define         STOPBITS_5_1p5          0x04    // 1.5 stop bits for 5-bit byte
 126 #define         STOPBITS_678_2          0x04    // 2 stop bits for 6-8 bit byte
 127 #define         USA_PARITY_NONE         0x00
 128 #define         USA_PARITY_ODD          0x08
 129 #define         USA_PARITY_EVEN         0x18
 130 #define         PARITY_MARK_1           0x28    // force parity MARK
 131 #define         PARITY_SPACE_0          0x38    // force parity SPACE
 132
 133 #define         TXFLOW_CTS                      0x04
 134 #define         TXFLOW_DSR                      0x08
 135 #define         TXFLOW_XOFF                     0x01
 136 #define         TXFLOW_XOFF_ANY         0x02
 137 #define         TXFLOW_XOFF_BITS        (TXFLOW_XOFF | TXFLOW_XOFF_ANY)
 138
 139 #define         RXFLOW_XOFF                     0x10
 140 #define         RXFLOW_RTS                      0x20
 141 #define         RXFLOW_DTR                      0x40
 142 #define         RXFLOW_DSR_SENSITIVITY  0x80
 143
 144 #define         RXMODE_BYHAND           0x00
 145 #define         RXMODE_DMA                      0x02
 146
 147 #define         TXMODE_BYHAND           0x00
 148 #define         TXMODE_DMA                      0x02
 149
 150
 151 // all things called "StatusMessage" are sent on the status endpoint
 152
 153 struct keyspan_usa90_portStatusMessage
 154 {
 155         u8      msr,                    // reports the actual MSR register
 156                 cts,                    // reports CTS pin
 157                 dcd,                    // reports DCD pin
 158                 dsr,                    // reports DSR pin
 159                 ri,                             // reports RI pin
 160                 _txXoff,                // port is in XOFF state (we received XOFF)
 161                 rxBreak,                // reports break state
 162                 rxOverrun,              // count of overrun errors (since last reported)
 163                 rxParity,               // count of parity errors (since last reported)
 164                 rxFrame,                // count of frame errors (since last reported)
 165                 portState,              // PORTSTATE_xxx bits (useful for debugging)
 166                 messageAck,             // message acknowledgement
 167                 charAck,                // character acknowledgement
 168                 controlResponse;        // (value = returnStatus) a control message has been processed
 169 };
 170
 171 // bits in RX data message when STAT byte is included
 172
 173 #define RXERROR_OVERRUN         0x02
 174 #define RXERROR_PARITY          0x04
 175 #define RXERROR_FRAMING         0x08
 176 #define RXERROR_BREAK           0x10
 177
 178 #define PORTSTATE_ENABLED       0x80
 179 #define PORTSTATE_TXFLUSH       0x01
 180 #define PORTSTATE_TXBREAK       0x02
 181 #define PORTSTATE_LOOPBACK      0x04
 182
 183 // MSR bits
 184
 185 #define USA_MSR_dCTS                    0x01            // CTS has changed since last report
 186 #define USA_MSR_dDSR                    0x02
 187 #define USA_MSR_dRI                     0x04
 188 #define USA_MSR_dDCD                    0x08
 189
 190 #define USA_MSR_CTS                     0x10            // current state of CTS
 191 #define USA_MSR_DSR                     0x20
 192 #define USA_USA_MSR_RI                  0x40
 193 #define MSR_DCD                         0x80
 194
 195 // ie: the maximum length of an endpoint buffer
 196 #define         MAX_DATA_LEN                    64
 197
 198 #endif