include/asm-arm/hardware/amba_clcd.h

   1 /*
   2  * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
   3  *
   4  * David A Rusling
   5  *
   6  * Copyright (C) 2001 ARM Limited
   7  *
   8  * This file is subject to the terms and conditions of the GNU General Public
   9  * License.  See the file COPYING in the main directory of this archive
  10  * for more details.
  11  */
  12 #include <linux/config.h>
  13 #include <linux/fb.h>
  14
  15 /*
  16  * CLCD Controller Internal Register addresses
  17  */
  18 #define CLCD_TIM0               0x00000000
  19 #define CLCD_TIM1               0x00000004
  20 #define CLCD_TIM2               0x00000008
  21 #define CLCD_TIM3               0x0000000c
  22 #define CLCD_UBAS               0x00000010
  23 #define CLCD_LBAS               0x00000014
  24
  25 #ifndef CONFIG_ARCH_VERSATILE_PB
  26 #define CLCD_IENB               0x00000018
  27 #define CLCD_CNTL               0x0000001c
  28 #else
  29 /*
  30  * Someone rearranged these two registers on the Versatile
  31  * platform...
  32  */
  33 #define CLCD_IENB               0x0000001c
  34 #define CLCD_CNTL               0x00000018
  35 #endif
  36
  37 #define CLCD_STAT               0x00000020
  38 #define CLCD_INTR               0x00000024
  39 #define CLCD_UCUR               0x00000028
  40 #define CLCD_LCUR               0x0000002C
  41 #define CLCD_PALL               0x00000200
  42 #define CLCD_PALETTE            0x00000200
  43
  44 #define TIM2_CLKSEL             (1 << 5)
  45 #define TIM2_IVS                (1 << 11)
  46 #define TIM2_IHS                (1 << 12)
  47 #define TIM2_IPC                (1 << 13)
  48 #define TIM2_IOE                (1 << 14)
  49 #define TIM2_BCD                (1 << 26)
  50
  51 #define CNTL_LCDEN              (1 << 0)
  52 #define CNTL_LCDBPP1            (0 << 1)
  53 #define CNTL_LCDBPP2            (1 << 1)
  54 #define CNTL_LCDBPP4            (2 << 1)
  55 #define CNTL_LCDBPP8            (3 << 1)
  56 #define CNTL_LCDBPP16           (4 << 1)
  57 #define CNTL_LCDBPP24           (5 << 1)
  58 #define CNTL_LCDBW              (1 << 4)
  59 #define CNTL_LCDTFT             (1 << 5)
  60 #define CNTL_LCDMONO8           (1 << 6)
  61 #define CNTL_LCDDUAL            (1 << 7)
  62 #define CNTL_BGR                (1 << 8)
  63 #define CNTL_BEBO               (1 << 9)
  64 #define CNTL_BEPO               (1 << 10)
  65 #define CNTL_LCDPWR             (1 << 11)
  66 #define CNTL_LCDVCOMP(x)        ((x) << 12)
  67 #define CNTL_LDMAFIFOTIME       (1 << 15)
  68 #define CNTL_WATERMARK          (1 << 16)
  69
  70 struct clcd_panel {
  71         struct fb_videomode     mode;
  72         signed short            width;  /* width in mm */
  73         signed short            height; /* height in mm */
  74         u32                     tim2;
  75         u32                     tim3;
  76         u32                     cntl;
  77         unsigned int            bpp:8,
  78                                 fixedtimings:1,
  79                                 grayscale:1;
  80         unsigned int            connector;
  81 };
  82
  83 struct clcd_regs {
  84         u32                     tim0;
  85         u32                     tim1;
  86         u32                     tim2;
  87         u32                     tim3;
  88         u32                     cntl;
  89         unsigned long           pixclock;
  90 };
  91
  92 struct clcd_fb;
  93
  94 /*
  95  * the board-type specific routines
  96  */
  97 struct clcd_board {
  98         const char *name;
  99
 100         /*
 101          * Optional.  Check whether the var structure is acceptable
 102          * for this display.
 103          */
 104         int     (*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
 105
 106         /*
 107          * Compulsary.  Decode fb->fb.var into regs->*.  In the case of
 108          * fixed timing, set regs->* to the register values required.
 109          */
 110         void    (*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
 111
 112         /*
 113          * Optional.  Disable any extra display hardware.
 114          */
 115         void    (*disable)(struct clcd_fb *);
 116
 117         /*
 118          * Optional.  Enable any extra display hardware.
 119          */
 120         void    (*enable)(struct clcd_fb *);
 121
 122         /*
 123          * Setup platform specific parts of CLCD driver
 124          */
 125         int     (*setup)(struct clcd_fb *);
 126
 127         /*
 128          * Remove platform specific parts of CLCD driver
 129          */
 130         void    (*remove)(struct clcd_fb *);
 131 };
 132
 133 struct amba_device;
 134 struct clk;
 135
 136 /* this data structure describes each frame buffer device we find */
 137 struct clcd_fb {
 138         struct fb_info          fb;
 139         struct amba_device      *dev;
 140         struct clk              *clk;
 141         struct clcd_panel       *panel;
 142         struct clcd_board       *board;
 143         void                    *board_data;
 144         void                    *regs;
 145         u32                     clcd_cntl;
 146         u32                     cmap[16];
 147 };
 148
 149 static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
 150 {
 151         u32 val;
 152
 153         /*
 154          * Program the CLCD controller registers and start the CLCD
 155          */
 156         val = ((fb->fb.var.xres / 16) - 1) << 2;
 157         val |= (fb->fb.var.hsync_len - 1) << 8;
 158         val |= (fb->fb.var.right_margin - 1) << 16;
 159         val |= (fb->fb.var.left_margin - 1) << 24;
 160         regs->tim0 = val;
 161
 162         val = fb->fb.var.yres - 1;
 163         val |= (fb->fb.var.vsync_len - 1) << 10;
 164         val |= fb->fb.var.lower_margin << 16;
 165         val |= fb->fb.var.upper_margin << 24;
 166         regs->tim1 = val;
 167
 168         val = fb->panel->tim2;
 169         val |= fb->fb.var.sync & FB_SYNC_HOR_HIGH_ACT  ? 0 : TIM2_IHS;
 170         val |= fb->fb.var.sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
 171
 172         if (fb->panel->cntl & CNTL_LCDTFT)
 173                 val |= (fb->fb.var.xres_virtual - 1) << 16;
 174         else if (fb->panel->cntl & CNTL_LCDBW)
 175                 printk("what value for CPL for stnmono panels?");
 176         else
 177                 val |= ((fb->fb.var.xres_virtual * 8 / 3) - 1) << 16;
 178         regs->tim2 = val;
 179
 180         regs->tim3 = fb->panel->tim3;
 181
 182         val = fb->panel->cntl;
 183         if (fb->fb.var.grayscale)
 184                 val |= CNTL_LCDBW;
 185
 186         switch (fb->fb.var.bits_per_pixel) {
 187         case 1:
 188                 val |= CNTL_LCDBPP1;
 189                 break;
 190         case 2:
 191                 val |= CNTL_LCDBPP2;
 192                 break;
 193         case 4:
 194                 val |= CNTL_LCDBPP4;
 195                 break;
 196         case 8:
 197                 val |= CNTL_LCDBPP8;
 198                 break;
 199         case 16:
 200                 val |= CNTL_LCDBPP16;
 201                 break;
 202         case 24:
 203                 val |= CNTL_LCDBPP24;
 204                 break;
 205         }
 206
 207         regs->cntl = val;
 208         regs->pixclock = fb->fb.var.pixclock;
 209 }
 210
 211 static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
 212 {
 213         var->xres_virtual = var->xres = (var->xres + 7) & ~7;
 214         var->yres_virtual = var->yres;
 215
 216 #define CHECK(e,l,h) (var->e < l || var->e > h)
 217         if (CHECK(right_margin, (5+1), 256) ||  /* back porch */
 218             CHECK(left_margin, (5+1), 256) ||   /* front porch */
 219             CHECK(hsync_len, (5+1), 256) ||
 220             var->xres > 4096 ||
 221             var->lower_margin > 255 ||          /* back porch */
 222             var->upper_margin > 255 ||          /* front porch */
 223             var->vsync_len > 32 ||
 224             var->yres > 1024)
 225                 return -EINVAL;
 226 #undef CHECK
 227
 228         /* single panel mode: PCD = max(PCD, 1) */
 229         /* dual panel mode: PCD = max(PCD, 5) */
 230
 231         /*
 232          * You can't change the grayscale setting, and
 233          * we can only do non-interlaced video.
 234          */
 235         if (var->grayscale != fb->fb.var.grayscale ||
 236             (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
 237                 return -EINVAL;
 238
 239 #define CHECK(e) (var->e != fb->fb.var.e)
 240         if (fb->panel->fixedtimings &&
 241             (CHECK(xres)                ||
 242              CHECK(yres)                ||
 243              CHECK(bits_per_pixel)      ||
 244              CHECK(pixclock)            ||
 245              CHECK(left_margin)         ||
 246              CHECK(right_margin)        ||
 247              CHECK(upper_margin)        ||
 248              CHECK(lower_margin)        ||
 249              CHECK(hsync_len)           ||
 250              CHECK(vsync_len)           ||
 251              CHECK(sync)))
 252                 return -EINVAL;
 253 #undef CHECK
 254
 255         var->nonstd = 0;
 256         var->accel_flags = 0;
 257
 258         return 0;
 259 }