4 * (c) Copyright 2000 The Puffin Group Inc.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * by Helge Deller <deller@gmx.de>
14 #include <linux/errno.h>
15 #include <linux/init.h>
16 #include <linux/interrupt.h>
17 #include <linux/ioport.h>
18 #include <linux/slab.h>
19 #include <linux/module.h>
20 #include <linux/types.h>
23 #include <asm/hardware.h>
28 #define WAX_GSC_IRQ 7 /* Hardcoded Interrupt for GSC */
29 #define WAX_GSC_NMI_IRQ 29
31 static int wax_choose_irq(struct parisc_device
*dev
)
35 switch (dev
->id
.sversion
) {
36 case 0x73: irq
= 30; break; /* HIL */
37 case 0x8c: irq
= 25; break; /* RS232 */
38 case 0x90: irq
= 21; break; /* WAX EISA BA */
45 wax_init_irq(struct busdevice
*wax
)
47 unsigned long base
= wax
->hpa
;
49 /* Stop WAX barking for a bit */
50 gsc_writel(0x00000000, base
+OFFSET_IMR
);
52 /* clear pending interrupts */
53 (volatile u32
) gsc_readl(base
+OFFSET_IRR
);
55 /* We're not really convinced we want to reset the onboard
56 * devices. Firmware does it for us...
60 // gsc_writel(0xFFFFFFFF, base+0x1000); /* HIL */
61 // gsc_writel(0xFFFFFFFF, base+0x2000); /* RS232-B on Wax */
63 /* Ok we hit it on the head with a hammer, our Dog is now
64 ** comatose and muzzled. Devices will now unmask WAX
65 ** interrupts as they are registered as irq's in the WAX range.
70 wax_init_chip(struct parisc_device
*dev
)
72 struct busdevice
*wax
;
73 struct gsc_irq gsc_irq
;
76 wax
= kmalloc(sizeof(struct busdevice
), GFP_KERNEL
);
83 wax
->version
= 0; /* gsc_readb(wax->hpa+WAX_VER); */
84 printk(KERN_INFO
"%s at 0x%lx found.\n", wax
->name
, wax
->hpa
);
86 /* Stop wax hissing for a bit */
89 /* the IRQ wax should use */
90 irq
= gsc_claim_irq(&gsc_irq
, WAX_GSC_IRQ
);
92 printk(KERN_ERR
"%s(): cannot get GSC irq\n",
98 ret
= request_irq(gsc_irq
.irq
, busdev_barked
, 0, "wax", wax
);
104 /* Save this for debugging later */
105 wax
->parent_irq
= gsc_irq
.irq
;
106 wax
->eim
= ((u32
) gsc_irq
.txn_addr
) | gsc_irq
.txn_data
;
108 /* enable IRQ's for devices below WAX */
109 gsc_writel(wax
->eim
, wax
->hpa
+ OFFSET_IAR
);
111 /* Done init'ing, register this driver */
112 ret
= gsc_common_irqsetup(dev
, wax
);
118 fixup_child_irqs(dev
, wax
->busdev_region
->data
.irqbase
,
120 /* On 715-class machines, Wax EISA is a sibling of Wax, not a child. */
121 if (dev
->parent
->id
.hw_type
!= HPHW_IOA
) {
122 fixup_child_irqs(dev
->parent
, wax
->busdev_region
->data
.irqbase
,
129 static struct parisc_device_id wax_tbl
[] = {
130 { HPHW_BA
, HVERSION_REV_ANY_ID
, HVERSION_ANY_ID
, 0x0008e },
134 MODULE_DEVICE_TABLE(parisc
, wax_tbl
);
136 struct parisc_driver wax_driver
= {
139 .probe
= wax_init_chip
,