2 * INET An implementation of the TCP/IP protocol suite for the LINUX
3 * operating system. INET is implemented using the BSD Socket
4 * interface as the means of communication with the user level.
6 * Global definitions for the ARCnet interface.
8 * Authors: David Woodhouse and Avery Pennarun
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
16 #ifndef _LINUX_IF_ARCNET_H
17 #define _LINUX_IF_ARCNET_H
19 #include <linux/if_ether.h>
23 * These are the defined ARCnet Protocol ID's.
26 /* RFC1201 Protocol ID's */
27 #define ARC_P_IP 212 /* 0xD4 */
28 #define ARC_P_IPV6 196 /* 0xC4: RFC2497 */
29 #define ARC_P_ARP 213 /* 0xD5 */
30 #define ARC_P_RARP 214 /* 0xD6 */
31 #define ARC_P_IPX 250 /* 0xFA */
32 #define ARC_P_NOVELL_EC 236 /* 0xEC */
34 /* Old RFC1051 Protocol ID's */
35 #define ARC_P_IP_RFC1051 240 /* 0xF0 */
36 #define ARC_P_ARP_RFC1051 241 /* 0xF1 */
38 /* MS LanMan/WfWg "NDIS" encapsulation */
39 #define ARC_P_ETHER 232 /* 0xE8 */
41 /* Unsupported/indirectly supported protocols */
42 #define ARC_P_DATAPOINT_BOOT 0 /* very old Datapoint equipment */
43 #define ARC_P_DATAPOINT_MOUNT 1
44 #define ARC_P_POWERLAN_BEACON 8 /* Probably ATA-Netbios related */
45 #define ARC_P_POWERLAN_BEACON2 243 /* 0xF3 */
46 #define ARC_P_LANSOFT 251 /* 0xFB - what is this? */
47 #define ARC_P_ATALK 0xDD
49 /* Hardware address length */
53 * The RFC1201-specific components of an arcnet packet header.
57 uint8_t proto
; /* protocol ID field - varies */
58 uint8_t split_flag
; /* for use with split packets */
59 uint16_t sequence
; /* sequence number */
60 uint8_t payload
[0]; /* space remaining in packet (504 bytes)*/
62 #define RFC1201_HDR_SIZE 4
66 * The RFC1051-specific components.
70 uint8_t proto
; /* ARC_P_RFC1051_ARP/RFC1051_IP */
71 uint8_t payload
[0]; /* 507 bytes */
73 #define RFC1051_HDR_SIZE 1
77 * The ethernet-encap-specific components. We have a real ethernet header
82 uint8_t proto
; /* Always ARC_P_ETHER */
83 struct ethhdr eth
; /* standard ethernet header (yuck!) */
84 uint8_t payload
[0]; /* 493 bytes */
86 #define ETH_ENCAP_HDR_SIZE 14
90 * The data needed by the actual arcnet hardware.
92 * Now, in the real arcnet hardware, the third and fourth bytes are the
93 * 'offset' specification instead of the length, and the soft data is at
94 * the _end_ of the 512-byte buffer. We hide this complexity inside the
99 uint8_t source
, /* source ARCnet - filled in automagically */
100 dest
, /* destination ARCnet - 0 for broadcast */
101 offset
[2]; /* offset bytes (some weird semantics) */
103 #define ARC_HDR_SIZE 4
106 * This is an ARCnet frame header, as seen by the kernel (and userspace,
107 * when you do a raw packet capture).
111 /* hardware requirements */
112 struct arc_hardware hard
;
114 /* arcnet encapsulation-specific bits */
116 struct arc_rfc1201 rfc1201
;
117 struct arc_rfc1051 rfc1051
;
118 struct arc_eth_encap eth_encap
;
119 uint8_t raw
[0]; /* 508 bytes */
123 #endif /* _LINUX_IF_ARCNET_H */