2 * Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation
4 * Written 1994-1999 by Avery Pennarun.
5 * Derived from skeleton.c by Donald Becker.
7 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
8 * for sponsoring the further development of this driver.
10 * **********************
12 * The original copyright of skeleton.c was as follows:
14 * skeleton.c Written 1993 by Donald Becker.
15 * Copyright 1993 United States Government as represented by the
16 * Director, National Security Agency. This software may only be used
17 * and distributed according to the terms of the GNU General Public License as
18 * modified by SRC, incorporated herein by reference.
20 * **********************
22 * For more details, see drivers/net/arcnet.c
24 * **********************
26 #include <linux/module.h>
27 #include <linux/init.h>
28 #include <linux/if_arp.h>
30 #include <linux/netdevice.h>
31 #include <linux/skbuff.h>
32 #include <linux/arcdevice.h>
34 #define VERSION "arcnet: RFC1051 \"simple standard\" (`s') encapsulation support loaded.\n"
37 static __be16
type_trans(struct sk_buff
*skb
, struct net_device
*dev
);
38 static void rx(struct net_device
*dev
, int bufnum
,
39 struct archdr
*pkthdr
, int length
);
40 static int build_header(struct sk_buff
*skb
, struct net_device
*dev
,
41 unsigned short type
, uint8_t daddr
);
42 static int prepare_tx(struct net_device
*dev
, struct archdr
*pkt
, int length
,
46 static struct ArcProto rfc1051_proto
=
49 .mtu
= XMTU
- RFC1051_HDR_SIZE
,
52 .build_header
= build_header
,
53 .prepare_tx
= prepare_tx
,
59 static int __init
arcnet_rfc1051_init(void)
63 arc_proto_map
[ARC_P_IP_RFC1051
]
64 = arc_proto_map
[ARC_P_ARP_RFC1051
]
67 /* if someone else already owns the broadcast, we won't take it */
68 if (arc_bcast_proto
== arc_proto_default
)
69 arc_bcast_proto
= &rfc1051_proto
;
74 static void __exit
arcnet_rfc1051_exit(void)
76 arcnet_unregister_proto(&rfc1051_proto
);
79 module_init(arcnet_rfc1051_init
);
80 module_exit(arcnet_rfc1051_exit
);
82 MODULE_LICENSE("GPL");
85 * Determine a packet's protocol ID.
87 * With ARCnet we have to convert everything to Ethernet-style stuff.
89 static __be16
type_trans(struct sk_buff
*skb
, struct net_device
*dev
)
91 struct arcnet_local
*lp
= dev
->priv
;
92 struct archdr
*pkt
= (struct archdr
*) skb
->data
;
93 struct arc_rfc1051
*soft
= &pkt
->soft
.rfc1051
;
94 int hdr_size
= ARC_HDR_SIZE
+ RFC1051_HDR_SIZE
;
96 /* Pull off the arcnet header. */
97 skb_reset_mac_header(skb
);
98 skb_pull(skb
, hdr_size
);
100 if (pkt
->hard
.dest
== 0)
101 skb
->pkt_type
= PACKET_BROADCAST
;
102 else if (dev
->flags
& IFF_PROMISC
) {
103 /* if we're not sending to ourselves :) */
104 if (pkt
->hard
.dest
!= dev
->dev_addr
[0])
105 skb
->pkt_type
= PACKET_OTHERHOST
;
107 /* now return the protocol number */
108 switch (soft
->proto
) {
109 case ARC_P_IP_RFC1051
:
110 return htons(ETH_P_IP
);
111 case ARC_P_ARP_RFC1051
:
112 return htons(ETH_P_ARP
);
115 lp
->stats
.rx_errors
++;
116 lp
->stats
.rx_crc_errors
++;
120 return htons(ETH_P_IP
);
124 /* packet receiver */
125 static void rx(struct net_device
*dev
, int bufnum
,
126 struct archdr
*pkthdr
, int length
)
128 struct arcnet_local
*lp
= dev
->priv
;
130 struct archdr
*pkt
= pkthdr
;
133 BUGMSG(D_DURING
, "it's a raw packet (length=%d)\n", length
);
140 skb
= alloc_skb(length
+ ARC_HDR_SIZE
, GFP_ATOMIC
);
142 BUGMSG(D_NORMAL
, "Memory squeeze, dropping packet.\n");
143 lp
->stats
.rx_dropped
++;
146 skb_put(skb
, length
+ ARC_HDR_SIZE
);
149 pkt
= (struct archdr
*) skb
->data
;
151 /* up to sizeof(pkt->soft) has already been copied from the card */
152 memcpy(pkt
, pkthdr
, sizeof(struct archdr
));
153 if (length
> sizeof(pkt
->soft
))
154 lp
->hw
.copy_from_card(dev
, bufnum
, ofs
+ sizeof(pkt
->soft
),
155 pkt
->soft
.raw
+ sizeof(pkt
->soft
),
156 length
- sizeof(pkt
->soft
));
158 BUGLVL(D_SKB
) arcnet_dump_skb(dev
, skb
, "rx");
160 skb
->protocol
= type_trans(skb
, dev
);
162 dev
->last_rx
= jiffies
;
167 * Create the ARCnet hard/soft headers for RFC1051.
169 static int build_header(struct sk_buff
*skb
, struct net_device
*dev
,
170 unsigned short type
, uint8_t daddr
)
172 struct arcnet_local
*lp
= dev
->priv
;
173 int hdr_size
= ARC_HDR_SIZE
+ RFC1051_HDR_SIZE
;
174 struct archdr
*pkt
= (struct archdr
*) skb_push(skb
, hdr_size
);
175 struct arc_rfc1051
*soft
= &pkt
->soft
.rfc1051
;
177 /* set the protocol ID according to RFC1051 */
180 soft
->proto
= ARC_P_IP_RFC1051
;
183 soft
->proto
= ARC_P_ARP_RFC1051
;
186 BUGMSG(D_NORMAL
, "RFC1051: I don't understand protocol %d (%Xh)\n",
188 lp
->stats
.tx_errors
++;
189 lp
->stats
.tx_aborted_errors
++;
195 * Set the source hardware address.
197 * This is pretty pointless for most purposes, but it can help in
198 * debugging. ARCnet does not allow us to change the source address in
199 * the actual packet sent)
201 pkt
->hard
.source
= *dev
->dev_addr
;
203 /* see linux/net/ethernet/eth.c to see where I got the following */
205 if (dev
->flags
& (IFF_LOOPBACK
| IFF_NOARP
)) {
207 * FIXME: fill in the last byte of the dest ipaddr here to better
208 * comply with RFC1051 in "noarp" mode.
213 /* otherwise, just fill it in and go! */
214 pkt
->hard
.dest
= daddr
;
216 return hdr_size
; /* success */
220 static int prepare_tx(struct net_device
*dev
, struct archdr
*pkt
, int length
,
223 struct arcnet_local
*lp
= dev
->priv
;
224 struct arc_hardware
*hard
= &pkt
->hard
;
227 BUGMSG(D_DURING
, "prepare_tx: txbufs=%d/%d/%d\n",
228 lp
->next_tx
, lp
->cur_tx
, bufnum
);
230 length
-= ARC_HDR_SIZE
; /* hard header is not included in packet length */
233 /* should never happen! other people already check for this. */
234 BUGMSG(D_NORMAL
, "Bug! prepare_tx with size %d (> %d)\n",
238 if (length
> MinTU
) {
240 hard
->offset
[1] = ofs
= 512 - length
;
241 } else if (length
> MTU
) {
243 hard
->offset
[1] = ofs
= 512 - length
- 3;
245 hard
->offset
[0] = ofs
= 256 - length
;
247 lp
->hw
.copy_to_card(dev
, bufnum
, 0, hard
, ARC_HDR_SIZE
);
248 lp
->hw
.copy_to_card(dev
, bufnum
, ofs
, &pkt
->soft
, length
);
250 lp
->lastload_dest
= hard
->dest
;