kmemtrace: SLOB hooks.
[linux-2.6/kmemtrace.git] / drivers / net / chelsio / espi.c
blob1e0749e000b0972eaa8170b59dc9131c39c2ac3f
1 /*****************************************************************************
2 * *
3 * File: espi.c *
4 * $Revision: 1.14 $ *
5 * $Date: 2005/05/14 00:59:32 $ *
6 * Description: *
7 * Ethernet SPI functionality. *
8 * part of the Chelsio 10Gb Ethernet Driver. *
9 * *
10 * This program is free software; you can redistribute it and/or modify *
11 * it under the terms of the GNU General Public License, version 2, as *
12 * published by the Free Software Foundation. *
13 * *
14 * You should have received a copy of the GNU General Public License along *
15 * with this program; if not, write to the Free Software Foundation, Inc., *
16 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
17 * *
18 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
19 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
20 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
21 * *
22 * http://www.chelsio.com *
23 * *
24 * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
25 * All rights reserved. *
26 * *
27 * Maintainers: maintainers@chelsio.com *
28 * *
29 * Authors: Dimitrios Michailidis <dm@chelsio.com> *
30 * Tina Yang <tainay@chelsio.com> *
31 * Felix Marti <felix@chelsio.com> *
32 * Scott Bardone <sbardone@chelsio.com> *
33 * Kurt Ottaway <kottaway@chelsio.com> *
34 * Frank DiMambro <frank@chelsio.com> *
35 * *
36 * History: *
37 * *
38 ****************************************************************************/
40 #include "common.h"
41 #include "regs.h"
42 #include "espi.h"
44 struct peespi {
45 adapter_t *adapter;
46 struct espi_intr_counts intr_cnt;
47 u32 misc_ctrl;
48 spinlock_t lock;
51 #define ESPI_INTR_MASK (F_DIP4ERR | F_RXDROP | F_TXDROP | F_RXOVERFLOW | \
52 F_RAMPARITYERR | F_DIP2PARITYERR)
53 #define MON_MASK (V_MONITORED_PORT_NUM(3) | F_MONITORED_DIRECTION \
54 | F_MONITORED_INTERFACE)
56 #define TRICN_CNFG 14
57 #define TRICN_CMD_READ 0x11
58 #define TRICN_CMD_WRITE 0x21
59 #define TRICN_CMD_ATTEMPTS 10
61 static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr,
62 int ch_addr, int reg_offset, u32 wr_data)
64 int busy, attempts = TRICN_CMD_ATTEMPTS;
66 writel(V_WRITE_DATA(wr_data) |
67 V_REGISTER_OFFSET(reg_offset) |
68 V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) |
69 V_BUNDLE_ADDR(bundle_addr) |
70 V_SPI4_COMMAND(TRICN_CMD_WRITE),
71 adapter->regs + A_ESPI_CMD_ADDR);
72 writel(0, adapter->regs + A_ESPI_GOSTAT);
74 do {
75 busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY;
76 } while (busy && --attempts);
78 if (busy)
79 CH_ERR("%s: TRICN write timed out\n", adapter->name);
81 return busy;
84 static int tricn_init(adapter_t *adapter)
86 int i, sme = 1;
88 if (!(readl(adapter->regs + A_ESPI_RX_RESET) & F_RX_CLK_STATUS)) {
89 CH_ERR("%s: ESPI clock not ready\n", adapter->name);
90 return -1;
93 writel(F_ESPI_RX_CORE_RST, adapter->regs + A_ESPI_RX_RESET);
95 if (sme) {
96 tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81);
97 tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81);
98 tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81);
100 for (i = 1; i <= 8; i++)
101 tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1);
102 for (i = 1; i <= 2; i++)
103 tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1);
104 for (i = 1; i <= 3; i++)
105 tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
106 tricn_write(adapter, 0, 2, 4, TRICN_CNFG, 0xf1);
107 tricn_write(adapter, 0, 2, 5, TRICN_CNFG, 0xe1);
108 tricn_write(adapter, 0, 2, 6, TRICN_CNFG, 0xf1);
109 tricn_write(adapter, 0, 2, 7, TRICN_CNFG, 0x80);
110 tricn_write(adapter, 0, 2, 8, TRICN_CNFG, 0xf1);
112 writel(F_ESPI_RX_CORE_RST | F_ESPI_RX_LNK_RST,
113 adapter->regs + A_ESPI_RX_RESET);
115 return 0;
118 void t1_espi_intr_enable(struct peespi *espi)
120 u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
123 * Cannot enable ESPI interrupts on T1B because HW asserts the
124 * interrupt incorrectly, namely the driver gets ESPI interrupts
125 * but no data is actually dropped (can verify this reading the ESPI
126 * drop registers). Also, once the ESPI interrupt is asserted it
127 * cannot be cleared (HW bug).
129 enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK;
130 writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE);
131 writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
134 void t1_espi_intr_clear(struct peespi *espi)
136 readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
137 writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS);
138 writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE);
141 void t1_espi_intr_disable(struct peespi *espi)
143 u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
145 writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE);
146 writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
149 int t1_espi_intr_handler(struct peespi *espi)
151 u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
153 if (status & F_DIP4ERR)
154 espi->intr_cnt.DIP4_err++;
155 if (status & F_RXDROP)
156 espi->intr_cnt.rx_drops++;
157 if (status & F_TXDROP)
158 espi->intr_cnt.tx_drops++;
159 if (status & F_RXOVERFLOW)
160 espi->intr_cnt.rx_ovflw++;
161 if (status & F_RAMPARITYERR)
162 espi->intr_cnt.parity_err++;
163 if (status & F_DIP2PARITYERR) {
164 espi->intr_cnt.DIP2_parity_err++;
167 * Must read the error count to clear the interrupt
168 * that it causes.
170 readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
174 * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we
175 * write the status as is.
177 if (status && t1_is_T1B(espi->adapter))
178 status = 1;
179 writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
180 return 0;
183 const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi)
185 return &espi->intr_cnt;
188 static void espi_setup_for_pm3393(adapter_t *adapter)
190 u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200;
192 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
193 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1);
194 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
195 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3);
196 writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
197 writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
198 writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH);
199 writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
200 writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG);
203 static void espi_setup_for_vsc7321(adapter_t *adapter)
205 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
206 writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1);
207 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
208 writel(0xa00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
209 writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
210 writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
211 writel(V_RX_NPORTS(4) | V_TX_NPORTS(4), adapter->regs + A_PORT_CONFIG);
213 writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
217 * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug.
219 static void espi_setup_for_ixf1010(adapter_t *adapter, int nports)
221 writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
222 if (nports == 4) {
223 if (is_T2(adapter)) {
224 writel(0xf00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
225 writel(0x3c0, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
226 } else {
227 writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
228 writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
230 } else {
231 writel(0x1fff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
232 writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
234 writel(V_RX_NPORTS(nports) | V_TX_NPORTS(nports), adapter->regs + A_PORT_CONFIG);
238 int t1_espi_init(struct peespi *espi, int mac_type, int nports)
240 u32 status_enable_extra = 0;
241 adapter_t *adapter = espi->adapter;
243 /* Disable ESPI training. MACs that can handle it enable it below. */
244 writel(0, adapter->regs + A_ESPI_TRAIN);
246 if (is_T2(adapter)) {
247 writel(V_OUT_OF_SYNC_COUNT(4) |
248 V_DIP2_PARITY_ERR_THRES(3) |
249 V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
250 writel(nports == 4 ? 0x200040 : 0x1000080,
251 adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
252 } else
253 writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
255 if (mac_type == CHBT_MAC_PM3393)
256 espi_setup_for_pm3393(adapter);
257 else if (mac_type == CHBT_MAC_VSC7321)
258 espi_setup_for_vsc7321(adapter);
259 else if (mac_type == CHBT_MAC_IXF1010) {
260 status_enable_extra = F_INTEL1010MODE;
261 espi_setup_for_ixf1010(adapter, nports);
262 } else
263 return -1;
265 writel(status_enable_extra | F_RXSTATUSENABLE,
266 adapter->regs + A_ESPI_FIFO_STATUS_ENABLE);
268 if (is_T2(adapter)) {
269 tricn_init(adapter);
271 * Always position the control at the 1st port egress IN
272 * (sop,eop) counter to reduce PIOs for T/N210 workaround.
274 espi->misc_ctrl = readl(adapter->regs + A_ESPI_MISC_CONTROL);
275 espi->misc_ctrl &= ~MON_MASK;
276 espi->misc_ctrl |= F_MONITORED_DIRECTION;
277 if (adapter->params.nports == 1)
278 espi->misc_ctrl |= F_MONITORED_INTERFACE;
279 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
280 spin_lock_init(&espi->lock);
283 return 0;
286 void t1_espi_destroy(struct peespi *espi)
288 kfree(espi);
291 struct peespi *t1_espi_create(adapter_t *adapter)
293 struct peespi *espi = kzalloc(sizeof(*espi), GFP_KERNEL);
295 if (espi)
296 espi->adapter = adapter;
297 return espi;
300 #if 0
301 void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val)
303 struct peespi *espi = adapter->espi;
305 if (!is_T2(adapter))
306 return;
307 spin_lock(&espi->lock);
308 espi->misc_ctrl = (val & ~MON_MASK) |
309 (espi->misc_ctrl & MON_MASK);
310 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
311 spin_unlock(&espi->lock);
313 #endif /* 0 */
315 u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
317 struct peespi *espi = adapter->espi;
318 u32 sel;
320 if (!is_T2(adapter))
321 return 0;
323 sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2);
324 if (!wait) {
325 if (!spin_trylock(&espi->lock))
326 return 0;
327 } else
328 spin_lock(&espi->lock);
330 if ((sel != (espi->misc_ctrl & MON_MASK))) {
331 writel(((espi->misc_ctrl & ~MON_MASK) | sel),
332 adapter->regs + A_ESPI_MISC_CONTROL);
333 sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
334 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
335 } else
336 sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
337 spin_unlock(&espi->lock);
338 return sel;
342 * This function is for T204 only.
343 * compare with t1_espi_get_mon(), it reads espiInTxSop[0 ~ 3] in
344 * one shot, since there is no per port counter on the out side.
346 int t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait)
348 struct peespi *espi = adapter->espi;
349 u8 i, nport = (u8)adapter->params.nports;
351 if (!wait) {
352 if (!spin_trylock(&espi->lock))
353 return -1;
354 } else
355 spin_lock(&espi->lock);
357 if ((espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION) {
358 espi->misc_ctrl = (espi->misc_ctrl & ~MON_MASK) |
359 F_MONITORED_DIRECTION;
360 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
362 for (i = 0 ; i < nport; i++, valp++) {
363 if (i) {
364 writel(espi->misc_ctrl | V_MONITORED_PORT_NUM(i),
365 adapter->regs + A_ESPI_MISC_CONTROL);
367 *valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
370 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
371 spin_unlock(&espi->lock);
372 return 0;