1 // SPDX-License-Identifier: GPL-2.0-only
3 * ARM64 Specific Low-Level ACPI Boot Support
5 * Copyright (C) 2013-2014, Linaro Ltd.
6 * Author: Al Stone <al.stone@linaro.org>
7 * Author: Graeme Gregory <graeme.gregory@linaro.org>
8 * Author: Hanjun Guo <hanjun.guo@linaro.org>
9 * Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
10 * Author: Naresh Bhat <naresh.bhat@linaro.org>
13 #define pr_fmt(fmt) "ACPI: " fmt
15 #include <linux/acpi.h>
16 #include <linux/cpumask.h>
17 #include <linux/efi.h>
18 #include <linux/efi-bgrt.h>
19 #include <linux/init.h>
20 #include <linux/irq.h>
21 #include <linux/irqdomain.h>
22 #include <linux/memblock.h>
23 #include <linux/of_fdt.h>
24 #include <linux/smp.h>
25 #include <linux/serial_core.h>
27 #include <acpi/ghes.h>
28 #include <asm/cputype.h>
29 #include <asm/cpu_ops.h>
30 #include <asm/daifflags.h>
31 #include <asm/pgtable.h>
32 #include <asm/smp_plat.h>
34 int acpi_noirq
= 1; /* skip ACPI IRQ initialization */
35 int acpi_disabled
= 1;
36 EXPORT_SYMBOL(acpi_disabled
);
38 int acpi_pci_disabled
= 1; /* skip ACPI PCI scan and IRQ initialization */
39 EXPORT_SYMBOL(acpi_pci_disabled
);
41 static bool param_acpi_off __initdata
;
42 static bool param_acpi_on __initdata
;
43 static bool param_acpi_force __initdata
;
45 static int __init
parse_acpi(char *arg
)
50 /* "acpi=off" disables both ACPI table parsing and interpreter */
51 if (strcmp(arg
, "off") == 0)
52 param_acpi_off
= true;
53 else if (strcmp(arg
, "on") == 0) /* prefer ACPI over DT */
55 else if (strcmp(arg
, "force") == 0) /* force ACPI to be enabled */
56 param_acpi_force
= true;
58 return -EINVAL
; /* Core will print when we return error */
62 early_param("acpi", parse_acpi
);
64 static int __init
dt_scan_depth1_nodes(unsigned long node
,
65 const char *uname
, int depth
,
69 * Ignore anything not directly under the root node; we'll
70 * catch its parent instead.
75 if (strcmp(uname
, "chosen") == 0)
78 if (strcmp(uname
, "hypervisor") == 0 &&
79 of_flat_dt_is_compatible(node
, "xen,xen"))
83 * This node at depth 1 is neither a chosen node nor a xen node,
84 * which we do not expect.
90 * __acpi_map_table() will be called before page_init(), so early_ioremap()
91 * or early_memremap() should be called here to for ACPI table mapping.
93 void __init __iomem
*__acpi_map_table(unsigned long phys
, unsigned long size
)
98 return early_memremap(phys
, size
);
101 void __init
__acpi_unmap_table(void __iomem
*map
, unsigned long size
)
106 early_memunmap(map
, size
);
109 bool __init
acpi_psci_present(void)
111 return acpi_gbl_FADT
.arm_boot_flags
& ACPI_FADT_PSCI_COMPLIANT
;
114 /* Whether HVC must be used instead of SMC as the PSCI conduit */
115 bool acpi_psci_use_hvc(void)
117 return acpi_gbl_FADT
.arm_boot_flags
& ACPI_FADT_PSCI_USE_HVC
;
121 * acpi_fadt_sanity_check() - Check FADT presence and carry out sanity
124 * Return 0 on success, <0 on failure
126 static int __init
acpi_fadt_sanity_check(void)
128 struct acpi_table_header
*table
;
129 struct acpi_table_fadt
*fadt
;
134 * FADT is required on arm64; retrieve it to check its presence
135 * and carry out revision and ACPI HW reduced compliancy tests
137 status
= acpi_get_table(ACPI_SIG_FADT
, 0, &table
);
138 if (ACPI_FAILURE(status
)) {
139 const char *msg
= acpi_format_exception(status
);
141 pr_err("Failed to get FADT table, %s\n", msg
);
145 fadt
= (struct acpi_table_fadt
*)table
;
148 * Revision in table header is the FADT Major revision, and there
149 * is a minor revision of FADT which was introduced by ACPI 5.1,
150 * we only deal with ACPI 5.1 or newer revision to get GIC and SMP
151 * boot protocol configuration data.
153 if (table
->revision
< 5 ||
154 (table
->revision
== 5 && fadt
->minor_revision
< 1)) {
155 pr_err("Unsupported FADT revision %d.%d, should be 5.1+\n",
156 table
->revision
, fadt
->minor_revision
);
161 if (!(fadt
->flags
& ACPI_FADT_HW_REDUCED
)) {
162 pr_err("FADT not ACPI hardware reduced compliant\n");
168 * acpi_get_table() creates FADT table mapping that
169 * should be released after parsing and before resuming boot
171 acpi_put_table(table
);
176 * acpi_boot_table_init() called from setup_arch(), always.
177 * 1. find RSDP and get its address, and then find XSDT
178 * 2. extract all tables and checksums them all
179 * 3. check ACPI FADT revision
180 * 4. check ACPI FADT HW reduced flag
182 * We can parse ACPI boot-time tables such as MADT after
183 * this function is called.
185 * On return ACPI is enabled if either:
187 * - ACPI tables are initialized and sanity checks passed
188 * - acpi=force was passed in the command line and ACPI was not disabled
189 * explicitly through acpi=off command line parameter
191 * ACPI is disabled on function return otherwise
193 void __init
acpi_boot_table_init(void)
196 * Enable ACPI instead of device tree unless
197 * - ACPI has been disabled explicitly (acpi=off), or
198 * - the device tree is not empty (it has more than just a /chosen node,
199 * and a /hypervisor node when running on Xen)
200 * and ACPI has not been [force] enabled (acpi=on|force)
202 if (param_acpi_off
||
203 (!param_acpi_on
&& !param_acpi_force
&&
204 of_scan_flat_dt(dt_scan_depth1_nodes
, NULL
)))
208 * ACPI is disabled at this point. Enable it in order to parse
209 * the ACPI tables and carry out sanity checks
214 * If ACPI tables are initialized and FADT sanity checks passed,
215 * leave ACPI enabled and carry on booting; otherwise disable ACPI
216 * on initialization error.
217 * If acpi=force was passed on the command line it forces ACPI
218 * to be enabled even if its initialization failed.
220 if (acpi_table_init() || acpi_fadt_sanity_check()) {
221 pr_err("Failed to init ACPI tables\n");
222 if (!param_acpi_force
)
228 if (earlycon_acpi_spcr_enable
)
229 early_init_dt_scan_chosen_stdout();
231 acpi_parse_spcr(earlycon_acpi_spcr_enable
, true);
232 if (IS_ENABLED(CONFIG_ACPI_BGRT
))
233 acpi_table_parse(ACPI_SIG_BGRT
, acpi_parse_bgrt
);
237 pgprot_t
__acpi_get_mem_attribute(phys_addr_t addr
)
240 * According to "Table 8 Map: EFI memory types to AArch64 memory
241 * types" of UEFI 2.5 section 2.3.6.1, each EFI memory type is
242 * mapped to a corresponding MAIR attribute encoding.
243 * The EFI memory attribute advises all possible capabilities
244 * of a memory region. We use the most efficient capability.
249 attr
= efi_mem_attributes(addr
);
250 if (attr
& EFI_MEMORY_WB
)
252 if (attr
& EFI_MEMORY_WT
)
253 return __pgprot(PROT_NORMAL_WT
);
254 if (attr
& EFI_MEMORY_WC
)
255 return __pgprot(PROT_NORMAL_NC
);
256 return __pgprot(PROT_DEVICE_nGnRnE
);
260 * Claim Synchronous External Aborts as a firmware first notification.
262 * Used by KVM and the arch do_sea handler.
263 * @regs may be NULL when called from process context.
265 int apei_claim_sea(struct pt_regs
*regs
)
268 unsigned long current_flags
;
270 if (!IS_ENABLED(CONFIG_ACPI_APEI_GHES
))
273 current_flags
= arch_local_save_flags();
276 * SEA can interrupt SError, mask it and describe this as an NMI so
277 * that APEI defers the handling.
279 local_daif_restore(DAIF_ERRCTX
);
281 err
= ghes_notify_sea();
283 local_daif_restore(current_flags
);