2 * arch/sparc/kernel/sun4c_irq.c:
4 * djhr: Hacked out of irq.c into a CPU dependent version.
6 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
7 * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
8 * Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
9 * Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
12 #include <linux/errno.h>
13 #include <linux/linkage.h>
14 #include <linux/kernel_stat.h>
15 #include <linux/signal.h>
16 #include <linux/sched.h>
17 #include <linux/ptrace.h>
18 #include <linux/interrupt.h>
19 #include <linux/slab.h>
20 #include <linux/init.h>
22 #include <linux/of_device.h>
25 #include <asm/ptrace.h>
26 #include <asm/processor.h>
27 #include <asm/system.h>
29 #include <asm/vaddrs.h>
30 #include <asm/timer.h>
31 #include <asm/openprom.h>
32 #include <asm/oplib.h>
33 #include <asm/traps.h>
36 #include <asm/idprom.h>
37 #include <asm/machines.h>
40 * Bit field defines for the interrupt registers on various
44 /* The sun4c interrupt register. */
45 #define SUN4C_INT_ENABLE 0x01 /* Allow interrupts. */
46 #define SUN4C_INT_E14 0x80 /* Enable level 14 IRQ. */
47 #define SUN4C_INT_E10 0x20 /* Enable level 10 IRQ. */
48 #define SUN4C_INT_E8 0x10 /* Enable level 8 IRQ. */
49 #define SUN4C_INT_E6 0x08 /* Enable level 6 IRQ. */
50 #define SUN4C_INT_E4 0x04 /* Enable level 4 IRQ. */
51 #define SUN4C_INT_E1 0x02 /* Enable level 1 IRQ. */
53 /* Pointer to the interrupt enable byte
55 * Dave Redman (djhr@tadpole.co.uk)
56 * What you may not be aware of is that entry.S requires this variable.
58 * --- linux_trap_nmi_sun4c --
60 * so don't go making it static, like I tried. sigh.
62 unsigned char __iomem
*interrupt_enable
= NULL
;
64 static void sun4c_disable_irq(unsigned int irq_nr
)
67 unsigned char current_mask
, new_mask
;
69 local_irq_save(flags
);
70 irq_nr
&= (NR_IRQS
- 1);
71 current_mask
= sbus_readb(interrupt_enable
);
74 new_mask
= ((current_mask
) & (~(SUN4C_INT_E1
)));
77 new_mask
= ((current_mask
) & (~(SUN4C_INT_E8
)));
80 new_mask
= ((current_mask
) & (~(SUN4C_INT_E10
)));
83 new_mask
= ((current_mask
) & (~(SUN4C_INT_E14
)));
86 local_irq_restore(flags
);
89 sbus_writeb(new_mask
, interrupt_enable
);
90 local_irq_restore(flags
);
93 static void sun4c_enable_irq(unsigned int irq_nr
)
96 unsigned char current_mask
, new_mask
;
98 local_irq_save(flags
);
99 irq_nr
&= (NR_IRQS
- 1);
100 current_mask
= sbus_readb(interrupt_enable
);
103 new_mask
= ((current_mask
) | SUN4C_INT_E1
);
106 new_mask
= ((current_mask
) | SUN4C_INT_E8
);
109 new_mask
= ((current_mask
) | SUN4C_INT_E10
);
112 new_mask
= ((current_mask
) | SUN4C_INT_E14
);
115 local_irq_restore(flags
);
118 sbus_writeb(new_mask
, interrupt_enable
);
119 local_irq_restore(flags
);
122 struct sun4c_timer_info
{
129 static struct sun4c_timer_info __iomem
*sun4c_timers
;
131 static void sun4c_clear_clock_irq(void)
133 sbus_readl(&sun4c_timers
->l10_limit
);
136 static void sun4c_load_profile_irq(int cpu
, unsigned int limit
)
138 /* Errm.. not sure how to do this.. */
141 static void __init
sun4c_init_timers(irq_handler_t counter_fn
)
143 const struct linux_prom_irqs
*irq
;
144 struct device_node
*dp
;
148 dp
= of_find_node_by_name(NULL
, "counter-timer");
150 prom_printf("sun4c_init_timers: Unable to find counter-timer\n");
154 addr
= of_get_property(dp
, "address", NULL
);
156 prom_printf("sun4c_init_timers: No address property\n");
160 sun4c_timers
= (void __iomem
*) (unsigned long) addr
[0];
162 irq
= of_get_property(dp
, "intr", NULL
);
165 prom_printf("sun4c_init_timers: No intr property\n");
169 /* Have the level 10 timer tick at 100HZ. We don't touch the
170 * level 14 timer limit since we are letting the prom handle
171 * them until we have a real console driver so L1-A works.
173 sbus_writel((((1000000/HZ
) + 1) << 10), &sun4c_timers
->l10_limit
);
175 master_l10_counter
= &sun4c_timers
->l10_count
;
177 err
= request_irq(irq
[0].pri
, counter_fn
,
178 (IRQF_DISABLED
| SA_STATIC_ALLOC
),
181 prom_printf("sun4c_init_timers: request_irq() fails with %d\n", err
);
185 sun4c_disable_irq(irq
[1].pri
);
189 static void sun4c_nop(void) {}
192 void __init
sun4c_init_IRQ(void)
194 struct device_node
*dp
;
197 dp
= of_find_node_by_name(NULL
, "interrupt-enable");
199 prom_printf("sun4c_init_IRQ: Unable to find interrupt-enable\n");
203 addr
= of_get_property(dp
, "address", NULL
);
206 prom_printf("sun4c_init_IRQ: No address property\n");
210 interrupt_enable
= (void __iomem
*) (unsigned long) addr
[0];
212 BTFIXUPSET_CALL(enable_irq
, sun4c_enable_irq
, BTFIXUPCALL_NORM
);
213 BTFIXUPSET_CALL(disable_irq
, sun4c_disable_irq
, BTFIXUPCALL_NORM
);
214 BTFIXUPSET_CALL(enable_pil_irq
, sun4c_enable_irq
, BTFIXUPCALL_NORM
);
215 BTFIXUPSET_CALL(disable_pil_irq
, sun4c_disable_irq
, BTFIXUPCALL_NORM
);
216 BTFIXUPSET_CALL(clear_clock_irq
, sun4c_clear_clock_irq
, BTFIXUPCALL_NORM
);
217 BTFIXUPSET_CALL(load_profile_irq
, sun4c_load_profile_irq
, BTFIXUPCALL_NOP
);
218 sparc_init_timers
= sun4c_init_timers
;
220 BTFIXUPSET_CALL(set_cpu_int
, sun4c_nop
, BTFIXUPCALL_NOP
);
221 BTFIXUPSET_CALL(clear_cpu_int
, sun4c_nop
, BTFIXUPCALL_NOP
);
222 BTFIXUPSET_CALL(set_irq_udt
, sun4c_nop
, BTFIXUPCALL_NOP
);
224 sbus_writeb(SUN4C_INT_ENABLE
, interrupt_enable
);
225 /* Cannot enable interrupts until OBP ticker is disabled. */