ACPI: simplify acpi_pci_irq_add_prt() API
[linux-2.6/linux-acpi-2.6.git] / include / linux / mtd / mtd.h
blob5675b63a0631fd46b54f5e3f6781b4b9b87c6936
1 /*
2 * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
4 * Released under GPL
5 */
7 #ifndef __MTD_MTD_H__
8 #define __MTD_MTD_H__
10 #include <linux/types.h>
11 #include <linux/module.h>
12 #include <linux/uio.h>
13 #include <linux/notifier.h>
14 #include <linux/device.h>
16 #include <linux/mtd/compatmac.h>
17 #include <mtd/mtd-abi.h>
19 #include <asm/div64.h>
21 #define MTD_CHAR_MAJOR 90
22 #define MTD_BLOCK_MAJOR 31
23 #define MAX_MTD_DEVICES 32
25 #define MTD_ERASE_PENDING 0x01
26 #define MTD_ERASING 0x02
27 #define MTD_ERASE_SUSPEND 0x04
28 #define MTD_ERASE_DONE 0x08
29 #define MTD_ERASE_FAILED 0x10
31 #define MTD_FAIL_ADDR_UNKNOWN -1LL
33 /* If the erase fails, fail_addr might indicate exactly which block failed. If
34 fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level or was not
35 specific to any particular block. */
36 struct erase_info {
37 struct mtd_info *mtd;
38 uint64_t addr;
39 uint64_t len;
40 uint64_t fail_addr;
41 u_long time;
42 u_long retries;
43 unsigned dev;
44 unsigned cell;
45 void (*callback) (struct erase_info *self);
46 u_long priv;
47 u_char state;
48 struct erase_info *next;
51 struct mtd_erase_region_info {
52 uint64_t offset; /* At which this region starts, from the beginning of the MTD */
53 uint32_t erasesize; /* For this region */
54 uint32_t numblocks; /* Number of blocks of erasesize in this region */
55 unsigned long *lockmap; /* If keeping bitmap of locks */
59 * oob operation modes
61 * MTD_OOB_PLACE: oob data are placed at the given offset
62 * MTD_OOB_AUTO: oob data are automatically placed at the free areas
63 * which are defined by the ecclayout
64 * MTD_OOB_RAW: mode to read raw data+oob in one chunk. The oob data
65 * is inserted into the data. Thats a raw image of the
66 * flash contents.
68 typedef enum {
69 MTD_OOB_PLACE,
70 MTD_OOB_AUTO,
71 MTD_OOB_RAW,
72 } mtd_oob_mode_t;
74 /**
75 * struct mtd_oob_ops - oob operation operands
76 * @mode: operation mode
78 * @len: number of data bytes to write/read
80 * @retlen: number of data bytes written/read
82 * @ooblen: number of oob bytes to write/read
83 * @oobretlen: number of oob bytes written/read
84 * @ooboffs: offset of oob data in the oob area (only relevant when
85 * mode = MTD_OOB_PLACE)
86 * @datbuf: data buffer - if NULL only oob data are read/written
87 * @oobbuf: oob data buffer
89 * Note, it is allowed to read more than one OOB area at one go, but not write.
90 * The interface assumes that the OOB write requests program only one page's
91 * OOB area.
93 struct mtd_oob_ops {
94 mtd_oob_mode_t mode;
95 size_t len;
96 size_t retlen;
97 size_t ooblen;
98 size_t oobretlen;
99 uint32_t ooboffs;
100 uint8_t *datbuf;
101 uint8_t *oobbuf;
104 struct mtd_info {
105 u_char type;
106 uint32_t flags;
107 uint64_t size; // Total size of the MTD
109 /* "Major" erase size for the device. Naïve users may take this
110 * to be the only erase size available, or may use the more detailed
111 * information below if they desire
113 uint32_t erasesize;
114 /* Minimal writable flash unit size. In case of NOR flash it is 1 (even
115 * though individual bits can be cleared), in case of NAND flash it is
116 * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
117 * it is of ECC block size, etc. It is illegal to have writesize = 0.
118 * Any driver registering a struct mtd_info must ensure a writesize of
119 * 1 or larger.
121 uint32_t writesize;
123 uint32_t oobsize; // Amount of OOB data per block (e.g. 16)
124 uint32_t oobavail; // Available OOB bytes per block
127 * If erasesize is a power of 2 then the shift is stored in
128 * erasesize_shift otherwise erasesize_shift is zero. Ditto writesize.
130 unsigned int erasesize_shift;
131 unsigned int writesize_shift;
132 /* Masks based on erasesize_shift and writesize_shift */
133 unsigned int erasesize_mask;
134 unsigned int writesize_mask;
136 // Kernel-only stuff starts here.
137 const char *name;
138 int index;
140 /* ecc layout structure pointer - read only ! */
141 struct nand_ecclayout *ecclayout;
143 /* Data for variable erase regions. If numeraseregions is zero,
144 * it means that the whole device has erasesize as given above.
146 int numeraseregions;
147 struct mtd_erase_region_info *eraseregions;
150 * Erase is an asynchronous operation. Device drivers are supposed
151 * to call instr->callback() whenever the operation completes, even
152 * if it completes with a failure.
153 * Callers are supposed to pass a callback function and wait for it
154 * to be called before writing to the block.
156 int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
158 /* This stuff for eXecute-In-Place */
159 /* phys is optional and may be set to NULL */
160 int (*point) (struct mtd_info *mtd, loff_t from, size_t len,
161 size_t *retlen, void **virt, resource_size_t *phys);
163 /* We probably shouldn't allow XIP if the unpoint isn't a NULL */
164 void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
166 /* Allow NOMMU mmap() to directly map the device (if not NULL)
167 * - return the address to which the offset maps
168 * - return -ENOSYS to indicate refusal to do the mapping
170 unsigned long (*get_unmapped_area) (struct mtd_info *mtd,
171 unsigned long len,
172 unsigned long offset,
173 unsigned long flags);
175 /* Backing device capabilities for this device
176 * - provides mmap capabilities
178 struct backing_dev_info *backing_dev_info;
181 int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
182 int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
184 /* In blackbox flight recorder like scenarios we want to make successful
185 writes in interrupt context. panic_write() is only intended to be
186 called when its known the kernel is about to panic and we need the
187 write to succeed. Since the kernel is not going to be running for much
188 longer, this function can break locks and delay to ensure the write
189 succeeds (but not sleep). */
191 int (*panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
193 int (*read_oob) (struct mtd_info *mtd, loff_t from,
194 struct mtd_oob_ops *ops);
195 int (*write_oob) (struct mtd_info *mtd, loff_t to,
196 struct mtd_oob_ops *ops);
199 * Methods to access the protection register area, present in some
200 * flash devices. The user data is one time programmable but the
201 * factory data is read only.
203 int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
204 int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
205 int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
206 int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
207 int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
208 int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len);
210 /* kvec-based read/write methods.
211 NB: The 'count' parameter is the number of _vectors_, each of
212 which contains an (ofs, len) tuple.
214 int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
216 /* Sync */
217 void (*sync) (struct mtd_info *mtd);
219 /* Chip-supported device locking */
220 int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
221 int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
223 /* Power Management functions */
224 int (*suspend) (struct mtd_info *mtd);
225 void (*resume) (struct mtd_info *mtd);
227 /* Bad block management functions */
228 int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
229 int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
231 struct notifier_block reboot_notifier; /* default mode before reboot */
233 /* ECC status information */
234 struct mtd_ecc_stats ecc_stats;
235 /* Subpage shift (NAND) */
236 int subpage_sft;
238 void *priv;
240 struct module *owner;
241 struct device dev;
242 int usecount;
244 /* If the driver is something smart, like UBI, it may need to maintain
245 * its own reference counting. The below functions are only for driver.
246 * The driver may register its callbacks. These callbacks are not
247 * supposed to be called by MTD users */
248 int (*get_device) (struct mtd_info *mtd);
249 void (*put_device) (struct mtd_info *mtd);
252 static inline struct mtd_info *dev_to_mtd(struct device *dev)
254 return dev ? container_of(dev, struct mtd_info, dev) : NULL;
257 static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
259 if (mtd->erasesize_shift)
260 return sz >> mtd->erasesize_shift;
261 do_div(sz, mtd->erasesize);
262 return sz;
265 static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd)
267 if (mtd->erasesize_shift)
268 return sz & mtd->erasesize_mask;
269 return do_div(sz, mtd->erasesize);
272 static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
274 if (mtd->writesize_shift)
275 return sz >> mtd->writesize_shift;
276 do_div(sz, mtd->writesize);
277 return sz;
280 static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd)
282 if (mtd->writesize_shift)
283 return sz & mtd->writesize_mask;
284 return do_div(sz, mtd->writesize);
287 /* Kernel-side ioctl definitions */
289 extern int add_mtd_device(struct mtd_info *mtd);
290 extern int del_mtd_device (struct mtd_info *mtd);
292 extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
293 extern struct mtd_info *get_mtd_device_nm(const char *name);
295 extern void put_mtd_device(struct mtd_info *mtd);
298 struct mtd_notifier {
299 void (*add)(struct mtd_info *mtd);
300 void (*remove)(struct mtd_info *mtd);
301 struct list_head list;
305 extern void register_mtd_user (struct mtd_notifier *new);
306 extern int unregister_mtd_user (struct mtd_notifier *old);
308 int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
309 unsigned long count, loff_t to, size_t *retlen);
311 int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
312 unsigned long count, loff_t from, size_t *retlen);
314 #ifdef CONFIG_MTD_PARTITIONS
315 void mtd_erase_callback(struct erase_info *instr);
316 #else
317 static inline void mtd_erase_callback(struct erase_info *instr)
319 if (instr->callback)
320 instr->callback(instr);
322 #endif
325 * Debugging macro and defines
327 #define MTD_DEBUG_LEVEL0 (0) /* Quiet */
328 #define MTD_DEBUG_LEVEL1 (1) /* Audible */
329 #define MTD_DEBUG_LEVEL2 (2) /* Loud */
330 #define MTD_DEBUG_LEVEL3 (3) /* Noisy */
332 #ifdef CONFIG_MTD_DEBUG
333 #define DEBUG(n, args...) \
334 do { \
335 if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
336 printk(KERN_INFO args); \
337 } while(0)
338 #else /* CONFIG_MTD_DEBUG */
339 #define DEBUG(n, args...) \
340 do { \
341 if (0) \
342 printk(KERN_INFO args); \
343 } while(0)
345 #endif /* CONFIG_MTD_DEBUG */
347 #endif /* __MTD_MTD_H__ */