include/linux/pci_hotplug.h

   1 /*
   2  * PCI HotPlug Core Functions
   3  *
   4  * Copyright (C) 1995,2001 Compaq Computer Corporation
   5  * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
   6  * Copyright (C) 2001 IBM Corp.
   7  *
   8  * All rights reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or (at
  13  * your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful, but
  16  * WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  18  * NON INFRINGEMENT.  See the GNU General Public License for more
  19  * details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  * Send feedback to <kristen.c.accardi@intel.com>
  26  *
  27  */
  28 #ifndef _PCI_HOTPLUG_H
  29 #define _PCI_HOTPLUG_H
  30
  31
  32 /* These values come from the PCI Hotplug Spec */
  33 enum pci_bus_speed {
  34         PCI_SPEED_33MHz                 = 0x00,
  35         PCI_SPEED_66MHz                 = 0x01,
  36         PCI_SPEED_66MHz_PCIX            = 0x02,
  37         PCI_SPEED_100MHz_PCIX           = 0x03,
  38         PCI_SPEED_133MHz_PCIX           = 0x04,
  39         PCI_SPEED_66MHz_PCIX_ECC        = 0x05,
  40         PCI_SPEED_100MHz_PCIX_ECC       = 0x06,
  41         PCI_SPEED_133MHz_PCIX_ECC       = 0x07,
  42         PCI_SPEED_66MHz_PCIX_266        = 0x09,
  43         PCI_SPEED_100MHz_PCIX_266       = 0x0a,
  44         PCI_SPEED_133MHz_PCIX_266       = 0x0b,
  45         PCI_SPEED_66MHz_PCIX_533        = 0x11,
  46         PCI_SPEED_100MHz_PCIX_533       = 0x12,
  47         PCI_SPEED_133MHz_PCIX_533       = 0x13,
  48         PCI_SPEED_UNKNOWN               = 0xff,
  49 };
  50
  51 /* These values come from the PCI Express Spec */
  52 enum pcie_link_width {
  53         PCIE_LNK_WIDTH_RESRV    = 0x00,
  54         PCIE_LNK_X1             = 0x01,
  55         PCIE_LNK_X2             = 0x02,
  56         PCIE_LNK_X4             = 0x04,
  57         PCIE_LNK_X8             = 0x08,
  58         PCIE_LNK_X12            = 0x0C,
  59         PCIE_LNK_X16            = 0x10,
  60         PCIE_LNK_X32            = 0x20,
  61         PCIE_LNK_WIDTH_UNKNOWN  = 0xFF,
  62 };
  63
  64 enum pcie_link_speed {
  65         PCIE_2PT5GB             = 0x14,
  66         PCIE_LNK_SPEED_UNKNOWN  = 0xFF,
  67 };
  68
  69 /**
  70  * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use
  71  * @owner: The module owner of this structure
  72  * @mod_name: The module name (KBUILD_MODNAME) of this structure
  73  * @enable_slot: Called when the user wants to enable a specific pci slot
  74  * @disable_slot: Called when the user wants to disable a specific pci slot
  75  * @set_attention_status: Called to set the specific slot's attention LED to
  76  * the specified value
  77  * @hardware_test: Called to run a specified hardware test on the specified
  78  * slot.
  79  * @get_power_status: Called to get the current power status of a slot.
  80  *      If this field is NULL, the value passed in the struct hotplug_slot_info
  81  *      will be used when this value is requested by a user.
  82  * @get_attention_status: Called to get the current attention status of a slot.
  83  *      If this field is NULL, the value passed in the struct hotplug_slot_info
  84  *      will be used when this value is requested by a user.
  85  * @get_latch_status: Called to get the current latch status of a slot.
  86  *      If this field is NULL, the value passed in the struct hotplug_slot_info
  87  *      will be used when this value is requested by a user.
  88  * @get_adapter_status: Called to get see if an adapter is present in the slot or not.
  89  *      If this field is NULL, the value passed in the struct hotplug_slot_info
  90  *      will be used when this value is requested by a user.
  91  * @get_max_bus_speed: Called to get the max bus speed for a slot.
  92  *      If this field is NULL, the value passed in the struct hotplug_slot_info
  93  *      will be used when this value is requested by a user.
  94  * @get_cur_bus_speed: Called to get the current bus speed for a slot.
  95  *      If this field is NULL, the value passed in the struct hotplug_slot_info
  96  *      will be used when this value is requested by a user.
  97  *
  98  * The table of function pointers that is passed to the hotplug pci core by a
  99  * hotplug pci driver.  These functions are called by the hotplug pci core when
 100  * the user wants to do something to a specific slot (query it for information,
 101  * set an LED, enable / disable power, etc.)
 102  */
 103 struct hotplug_slot_ops {
 104         struct module *owner;
 105         const char *mod_name;
 106         int (*enable_slot)              (struct hotplug_slot *slot);
 107         int (*disable_slot)             (struct hotplug_slot *slot);
 108         int (*set_attention_status)     (struct hotplug_slot *slot, u8 value);
 109         int (*hardware_test)            (struct hotplug_slot *slot, u32 value);
 110         int (*get_power_status)         (struct hotplug_slot *slot, u8 *value);
 111         int (*get_attention_status)     (struct hotplug_slot *slot, u8 *value);
 112         int (*get_latch_status)         (struct hotplug_slot *slot, u8 *value);
 113         int (*get_adapter_status)       (struct hotplug_slot *slot, u8 *value);
 114         int (*get_max_bus_speed)        (struct hotplug_slot *slot, enum pci_bus_speed *value);
 115         int (*get_cur_bus_speed)        (struct hotplug_slot *slot, enum pci_bus_speed *value);
 116 };
 117
 118 /**
 119  * struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot
 120  * @power: if power is enabled or not (1/0)
 121  * @attention_status: if the attention light is enabled or not (1/0)
 122  * @latch_status: if the latch (if any) is open or closed (1/0)
 123  * @adapter_present: if there is a pci board present in the slot or not (1/0)
 124  * @address: (domain << 16 | bus << 8 | dev)
 125  *
 126  * Used to notify the hotplug pci core of the status of a specific slot.
 127  */
 128 struct hotplug_slot_info {
 129         u8      power_status;
 130         u8      attention_status;
 131         u8      latch_status;
 132         u8      adapter_status;
 133         enum pci_bus_speed      max_bus_speed;
 134         enum pci_bus_speed      cur_bus_speed;
 135 };
 136
 137 /**
 138  * struct hotplug_slot - used to register a physical slot with the hotplug pci core
 139  * @ops: pointer to the &struct hotplug_slot_ops to be used for this slot
 140  * @info: pointer to the &struct hotplug_slot_info for the initial values for
 141  * this slot.
 142  * @release: called during pci_hp_deregister to free memory allocated in a
 143  * hotplug_slot structure.
 144  * @private: used by the hotplug pci controller driver to store whatever it
 145  * needs.
 146  */
 147 struct hotplug_slot {
 148         struct hotplug_slot_ops         *ops;
 149         struct hotplug_slot_info        *info;
 150         void (*release) (struct hotplug_slot *slot);
 151         void                            *private;
 152
 153         /* Variables below this are for use only by the hotplug pci core. */
 154         struct list_head                slot_list;
 155         struct pci_slot                 *pci_slot;
 156 };
 157 #define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj)
 158
 159 static inline const char *hotplug_slot_name(const struct hotplug_slot *slot)
 160 {
 161         return pci_slot_name(slot->pci_slot);
 162 }
 163
 164 extern int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *pbus,
 165                              int nr, const char *name,
 166                              struct module *owner, const char *mod_name);
 167 extern int pci_hp_deregister(struct hotplug_slot *slot);
 168 extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot,
 169                                                  struct hotplug_slot_info *info);
 170
 171 static inline int pci_hp_register(struct hotplug_slot *slot,
 172                                   struct pci_bus *pbus,
 173                                   int devnr, const char *name)
 174 {
 175         return __pci_hp_register(slot, pbus, devnr, name,
 176                                  THIS_MODULE, KBUILD_MODNAME);
 177 }
 178
 179 /* PCI Setting Record (Type 0) */
 180 struct hpp_type0 {
 181         u32 revision;
 182         u8  cache_line_size;
 183         u8  latency_timer;
 184         u8  enable_serr;
 185         u8  enable_perr;
 186 };
 187
 188 /* PCI-X Setting Record (Type 1) */
 189 struct hpp_type1 {
 190         u32 revision;
 191         u8  max_mem_read;
 192         u8  avg_max_split;
 193         u16 tot_max_split;
 194 };
 195
 196 /* PCI Express Setting Record (Type 2) */
 197 struct hpp_type2 {
 198         u32 revision;
 199         u32 unc_err_mask_and;
 200         u32 unc_err_mask_or;
 201         u32 unc_err_sever_and;
 202         u32 unc_err_sever_or;
 203         u32 cor_err_mask_and;
 204         u32 cor_err_mask_or;
 205         u32 adv_err_cap_and;
 206         u32 adv_err_cap_or;
 207         u16 pci_exp_devctl_and;
 208         u16 pci_exp_devctl_or;
 209         u16 pci_exp_lnkctl_and;
 210         u16 pci_exp_lnkctl_or;
 211         u32 sec_unc_err_sever_and;
 212         u32 sec_unc_err_sever_or;
 213         u32 sec_unc_err_mask_and;
 214         u32 sec_unc_err_mask_or;
 215 };
 216
 217 struct hotplug_params {
 218         struct hpp_type0 *t0;           /* Type0: NULL if not available */
 219         struct hpp_type1 *t1;           /* Type1: NULL if not available */
 220         struct hpp_type2 *t2;           /* Type2: NULL if not available */
 221         struct hpp_type0 type0_data;
 222         struct hpp_type1 type1_data;
 223         struct hpp_type2 type2_data;
 224 };
 225
 226 #ifdef CONFIG_ACPI
 227 #include <acpi/acpi.h>
 228 #include <acpi/acpi_bus.h>
 229 extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
 230                                 struct hotplug_params *hpp);
 231 int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
 232 int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle);
 233 int acpi_pci_detect_ejectable(struct pci_bus *pbus);
 234 #endif
 235 #endif
 236