drivers/bluetooth/bt3c_cs.c

   1 /*
   2  *
   3  *  Driver for the 3Com Bluetooth PCMCIA card
   4  *
   5  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
   6  *                           Jose Orlando Pereira <jop@di.uminho.pt>
   7  *
   8  *
   9  *  This program is free software; you can redistribute it and/or modify
  10  *  it under the terms of the GNU General Public License version 2 as
  11  *  published by the Free Software Foundation;
  12  *
  13  *  Software distributed under the License is distributed on an "AS
  14  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  15  *  implied. See the License for the specific language governing
  16  *  rights and limitations under the License.
  17  *
  18  *  The initial developer of the original code is David A. Hinds
  19  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
  20  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  21  *
  22  */
  23
  24 #include <linux/module.h>
  25
  26 #include <linux/kernel.h>
  27 #include <linux/init.h>
  28 #include <linux/slab.h>
  29 #include <linux/types.h>
  30 #include <linux/delay.h>
  31 #include <linux/errno.h>
  32 #include <linux/ptrace.h>
  33 #include <linux/ioport.h>
  34 #include <linux/spinlock.h>
  35 #include <linux/moduleparam.h>
  36
  37 #include <linux/skbuff.h>
  38 #include <linux/string.h>
  39 #include <linux/serial.h>
  40 #include <linux/serial_reg.h>
  41 #include <linux/bitops.h>
  42 #include <asm/system.h>
  43 #include <asm/io.h>
  44
  45 #include <linux/device.h>
  46 #include <linux/firmware.h>
  47
  48 #include <pcmcia/cistpl.h>
  49 #include <pcmcia/ciscode.h>
  50 #include <pcmcia/ds.h>
  51 #include <pcmcia/cisreg.h>
  52
  53 #include <net/bluetooth/bluetooth.h>
  54 #include <net/bluetooth/hci_core.h>
  55
  56
  57
  58 /* ======================== Module parameters ======================== */
  59
  60
  61 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
  62 MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card");
  63 MODULE_LICENSE("GPL");
  64 MODULE_FIRMWARE("BT3CPCC.bin");
  65
  66
  67
  68 /* ======================== Local structures ======================== */
  69
  70
  71 typedef struct bt3c_info_t {
  72         struct pcmcia_device *p_dev;
  73
  74         struct hci_dev *hdev;
  75
  76         spinlock_t lock;                /* For serializing operations */
  77
  78         struct sk_buff_head txq;
  79         unsigned long tx_state;
  80
  81         unsigned long rx_state;
  82         unsigned long rx_count;
  83         struct sk_buff *rx_skb;
  84 } bt3c_info_t;
  85
  86
  87 static int bt3c_config(struct pcmcia_device *link);
  88 static void bt3c_release(struct pcmcia_device *link);
  89
  90 static void bt3c_detach(struct pcmcia_device *p_dev);
  91
  92
  93 /* Transmit states  */
  94 #define XMIT_SENDING  1
  95 #define XMIT_WAKEUP   2
  96 #define XMIT_WAITING  8
  97
  98 /* Receiver states */
  99 #define RECV_WAIT_PACKET_TYPE   0
 100 #define RECV_WAIT_EVENT_HEADER  1
 101 #define RECV_WAIT_ACL_HEADER    2
 102 #define RECV_WAIT_SCO_HEADER    3
 103 #define RECV_WAIT_DATA          4
 104
 105
 106
 107 /* ======================== Special I/O functions ======================== */
 108
 109
 110 #define DATA_L   0
 111 #define DATA_H   1
 112 #define ADDR_L   2
 113 #define ADDR_H   3
 114 #define CONTROL  4
 115
 116
 117 static inline void bt3c_address(unsigned int iobase, unsigned short addr)
 118 {
 119         outb(addr & 0xff, iobase + ADDR_L);
 120         outb((addr >> 8) & 0xff, iobase + ADDR_H);
 121 }
 122
 123
 124 static inline void bt3c_put(unsigned int iobase, unsigned short value)
 125 {
 126         outb(value & 0xff, iobase + DATA_L);
 127         outb((value >> 8) & 0xff, iobase + DATA_H);
 128 }
 129
 130
 131 static inline void bt3c_io_write(unsigned int iobase, unsigned short addr, unsigned short value)
 132 {
 133         bt3c_address(iobase, addr);
 134         bt3c_put(iobase, value);
 135 }
 136
 137
 138 static inline unsigned short bt3c_get(unsigned int iobase)
 139 {
 140         unsigned short value = inb(iobase + DATA_L);
 141
 142         value |= inb(iobase + DATA_H) << 8;
 143
 144         return value;
 145 }
 146
 147
 148 static inline unsigned short bt3c_read(unsigned int iobase, unsigned short addr)
 149 {
 150         bt3c_address(iobase, addr);
 151
 152         return bt3c_get(iobase);
 153 }
 154
 155
 156
 157 /* ======================== Interrupt handling ======================== */
 158
 159
 160 static int bt3c_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
 161 {
 162         int actual = 0;
 163
 164         bt3c_address(iobase, 0x7080);
 165
 166         /* Fill FIFO with current frame */
 167         while (actual < len) {
 168                 /* Transmit next byte */
 169                 bt3c_put(iobase, buf[actual]);
 170                 actual++;
 171         }
 172
 173         bt3c_io_write(iobase, 0x7005, actual);
 174
 175         return actual;
 176 }
 177
 178
 179 static void bt3c_write_wakeup(bt3c_info_t *info)
 180 {
 181         if (!info) {
 182                 BT_ERR("Unknown device");
 183                 return;
 184         }
 185
 186         if (test_and_set_bit(XMIT_SENDING, &(info->tx_state)))
 187                 return;
 188
 189         do {
 190                 register unsigned int iobase = info->p_dev->resource[0]->start;
 191                 register struct sk_buff *skb;
 192                 register int len;
 193
 194                 if (!pcmcia_dev_present(info->p_dev))
 195                         break;
 196
 197
 198                 if (!(skb = skb_dequeue(&(info->txq)))) {
 199                         clear_bit(XMIT_SENDING, &(info->tx_state));
 200                         break;
 201                 }
 202
 203                 /* Send frame */
 204                 len = bt3c_write(iobase, 256, skb->data, skb->len);
 205
 206                 if (len != skb->len) {
 207                         BT_ERR("Very strange");
 208                 }
 209
 210                 kfree_skb(skb);
 211
 212                 info->hdev->stat.byte_tx += len;
 213
 214         } while (0);
 215 }
 216
 217
 218 static void bt3c_receive(bt3c_info_t *info)
 219 {
 220         unsigned int iobase;
 221         int size = 0, avail;
 222
 223         if (!info) {
 224                 BT_ERR("Unknown device");
 225                 return;
 226         }
 227
 228         iobase = info->p_dev->resource[0]->start;
 229
 230         avail = bt3c_read(iobase, 0x7006);
 231         //printk("bt3c_cs: receiving %d bytes\n", avail);
 232
 233         bt3c_address(iobase, 0x7480);
 234         while (size < avail) {
 235                 size++;
 236                 info->hdev->stat.byte_rx++;
 237
 238                 /* Allocate packet */
 239                 if (info->rx_skb == NULL) {
 240                         info->rx_state = RECV_WAIT_PACKET_TYPE;
 241                         info->rx_count = 0;
 242                         if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
 243                                 BT_ERR("Can't allocate mem for new packet");
 244                                 return;
 245                         }
 246                 }
 247
 248
 249                 if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
 250
 251                         info->rx_skb->dev = (void *) info->hdev;
 252                         bt_cb(info->rx_skb)->pkt_type = inb(iobase + DATA_L);
 253                         inb(iobase + DATA_H);
 254                         //printk("bt3c: PACKET_TYPE=%02x\n", bt_cb(info->rx_skb)->pkt_type);
 255
 256                         switch (bt_cb(info->rx_skb)->pkt_type) {
 257
 258                         case HCI_EVENT_PKT:
 259                                 info->rx_state = RECV_WAIT_EVENT_HEADER;
 260                                 info->rx_count = HCI_EVENT_HDR_SIZE;
 261                                 break;
 262
 263                         case HCI_ACLDATA_PKT:
 264                                 info->rx_state = RECV_WAIT_ACL_HEADER;
 265                                 info->rx_count = HCI_ACL_HDR_SIZE;
 266                                 break;
 267
 268                         case HCI_SCODATA_PKT:
 269                                 info->rx_state = RECV_WAIT_SCO_HEADER;
 270                                 info->rx_count = HCI_SCO_HDR_SIZE;
 271                                 break;
 272
 273                         default:
 274                                 /* Unknown packet */
 275                                 BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type);
 276                                 info->hdev->stat.err_rx++;
 277                                 clear_bit(HCI_RUNNING, &(info->hdev->flags));
 278
 279                                 kfree_skb(info->rx_skb);
 280                                 info->rx_skb = NULL;
 281                                 break;
 282
 283                         }
 284
 285                 } else {
 286
 287                         __u8 x = inb(iobase + DATA_L);
 288
 289                         *skb_put(info->rx_skb, 1) = x;
 290                         inb(iobase + DATA_H);
 291                         info->rx_count--;
 292
 293                         if (info->rx_count == 0) {
 294
 295                                 int dlen;
 296                                 struct hci_event_hdr *eh;
 297                                 struct hci_acl_hdr *ah;
 298                                 struct hci_sco_hdr *sh;
 299
 300                                 switch (info->rx_state) {
 301
 302                                 case RECV_WAIT_EVENT_HEADER:
 303                                         eh = hci_event_hdr(info->rx_skb);
 304                                         info->rx_state = RECV_WAIT_DATA;
 305                                         info->rx_count = eh->plen;
 306                                         break;
 307
 308                                 case RECV_WAIT_ACL_HEADER:
 309                                         ah = hci_acl_hdr(info->rx_skb);
 310                                         dlen = __le16_to_cpu(ah->dlen);
 311                                         info->rx_state = RECV_WAIT_DATA;
 312                                         info->rx_count = dlen;
 313                                         break;
 314
 315                                 case RECV_WAIT_SCO_HEADER:
 316                                         sh = hci_sco_hdr(info->rx_skb);
 317                                         info->rx_state = RECV_WAIT_DATA;
 318                                         info->rx_count = sh->dlen;
 319                                         break;
 320
 321                                 case RECV_WAIT_DATA:
 322                                         hci_recv_frame(info->rx_skb);
 323                                         info->rx_skb = NULL;
 324                                         break;
 325
 326                                 }
 327
 328                         }
 329
 330                 }
 331
 332         }
 333
 334         bt3c_io_write(iobase, 0x7006, 0x0000);
 335 }
 336
 337
 338 static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
 339 {
 340         bt3c_info_t *info = dev_inst;
 341         unsigned int iobase;
 342         int iir;
 343         irqreturn_t r = IRQ_NONE;
 344
 345         if (!info || !info->hdev)
 346                 /* our irq handler is shared */
 347                 return IRQ_NONE;
 348
 349         iobase = info->p_dev->resource[0]->start;
 350
 351         spin_lock(&(info->lock));
 352
 353         iir = inb(iobase + CONTROL);
 354         if (iir & 0x80) {
 355                 int stat = bt3c_read(iobase, 0x7001);
 356
 357                 if ((stat & 0xff) == 0x7f) {
 358                         BT_ERR("Very strange (stat=0x%04x)", stat);
 359                 } else if ((stat & 0xff) != 0xff) {
 360                         if (stat & 0x0020) {
 361                                 int status = bt3c_read(iobase, 0x7002) & 0x10;
 362                                 BT_INFO("%s: Antenna %s", info->hdev->name,
 363                                                         status ? "out" : "in");
 364                         }
 365                         if (stat & 0x0001)
 366                                 bt3c_receive(info);
 367                         if (stat & 0x0002) {
 368                                 //BT_ERR("Ack (stat=0x%04x)", stat);
 369                                 clear_bit(XMIT_SENDING, &(info->tx_state));
 370                                 bt3c_write_wakeup(info);
 371                         }
 372
 373                         bt3c_io_write(iobase, 0x7001, 0x0000);
 374
 375                         outb(iir, iobase + CONTROL);
 376                 }
 377                 r = IRQ_HANDLED;
 378         }
 379
 380         spin_unlock(&(info->lock));
 381
 382         return r;
 383 }
 384
 385
 386
 387 /* ======================== HCI interface ======================== */
 388
 389
 390 static int bt3c_hci_flush(struct hci_dev *hdev)
 391 {
 392         bt3c_info_t *info = (bt3c_info_t *)(hdev->driver_data);
 393
 394         /* Drop TX queue */
 395         skb_queue_purge(&(info->txq));
 396
 397         return 0;
 398 }
 399
 400
 401 static int bt3c_hci_open(struct hci_dev *hdev)
 402 {
 403         set_bit(HCI_RUNNING, &(hdev->flags));
 404
 405         return 0;
 406 }
 407
 408
 409 static int bt3c_hci_close(struct hci_dev *hdev)
 410 {
 411         if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
 412                 return 0;
 413
 414         bt3c_hci_flush(hdev);
 415
 416         return 0;
 417 }
 418
 419
 420 static int bt3c_hci_send_frame(struct sk_buff *skb)
 421 {
 422         bt3c_info_t *info;
 423         struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
 424         unsigned long flags;
 425
 426         if (!hdev) {
 427                 BT_ERR("Frame for unknown HCI device (hdev=NULL)");
 428                 return -ENODEV;
 429         }
 430
 431         info = (bt3c_info_t *) (hdev->driver_data);
 432
 433         switch (bt_cb(skb)->pkt_type) {
 434         case HCI_COMMAND_PKT:
 435                 hdev->stat.cmd_tx++;
 436                 break;
 437         case HCI_ACLDATA_PKT:
 438                 hdev->stat.acl_tx++;
 439                 break;
 440         case HCI_SCODATA_PKT:
 441                 hdev->stat.sco_tx++;
 442                 break;
 443         };
 444
 445         /* Prepend skb with frame type */
 446         memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
 447         skb_queue_tail(&(info->txq), skb);
 448
 449         spin_lock_irqsave(&(info->lock), flags);
 450
 451         bt3c_write_wakeup(info);
 452
 453         spin_unlock_irqrestore(&(info->lock), flags);
 454
 455         return 0;
 456 }
 457
 458
 459 static void bt3c_hci_destruct(struct hci_dev *hdev)
 460 {
 461 }
 462
 463
 464 static int bt3c_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
 465 {
 466         return -ENOIOCTLCMD;
 467 }
 468
 469
 470
 471 /* ======================== Card services HCI interaction ======================== */
 472
 473
 474 static int bt3c_load_firmware(bt3c_info_t *info, const unsigned char *firmware,
 475                               int count)
 476 {
 477         char *ptr = (char *) firmware;
 478         char b[9];
 479         unsigned int iobase, size, addr, fcs, tmp;
 480         int i, err = 0;
 481
 482         iobase = info->p_dev->resource[0]->start;
 483
 484         /* Reset */
 485         bt3c_io_write(iobase, 0x8040, 0x0404);
 486         bt3c_io_write(iobase, 0x8040, 0x0400);
 487
 488         udelay(1);
 489
 490         bt3c_io_write(iobase, 0x8040, 0x0404);
 491
 492         udelay(17);
 493
 494         /* Load */
 495         while (count) {
 496                 if (ptr[0] != 'S') {
 497                         BT_ERR("Bad address in firmware");
 498                         err = -EFAULT;
 499                         goto error;
 500                 }
 501
 502                 memset(b, 0, sizeof(b));
 503                 memcpy(b, ptr + 2, 2);
 504                 size = simple_strtoul(b, NULL, 16);
 505
 506                 memset(b, 0, sizeof(b));
 507                 memcpy(b, ptr + 4, 8);
 508                 addr = simple_strtoul(b, NULL, 16);
 509
 510                 memset(b, 0, sizeof(b));
 511                 memcpy(b, ptr + (size * 2) + 2, 2);
 512                 fcs = simple_strtoul(b, NULL, 16);
 513
 514                 memset(b, 0, sizeof(b));
 515                 for (tmp = 0, i = 0; i < size; i++) {
 516                         memcpy(b, ptr + (i * 2) + 2, 2);
 517                         tmp += simple_strtol(b, NULL, 16);
 518                 }
 519
 520                 if (((tmp + fcs) & 0xff) != 0xff) {
 521                         BT_ERR("Checksum error in firmware");
 522                         err = -EILSEQ;
 523                         goto error;
 524                 }
 525
 526                 if (ptr[1] == '3') {
 527                         bt3c_address(iobase, addr);
 528
 529                         memset(b, 0, sizeof(b));
 530                         for (i = 0; i < (size - 4) / 2; i++) {
 531                                 memcpy(b, ptr + (i * 4) + 12, 4);
 532                                 tmp = simple_strtoul(b, NULL, 16);
 533                                 bt3c_put(iobase, tmp);
 534                         }
 535                 }
 536
 537                 ptr   += (size * 2) + 6;
 538                 count -= (size * 2) + 6;
 539         }
 540
 541         udelay(17);
 542
 543         /* Boot */
 544         bt3c_address(iobase, 0x3000);
 545         outb(inb(iobase + CONTROL) | 0x40, iobase + CONTROL);
 546
 547 error:
 548         udelay(17);
 549
 550         /* Clear */
 551         bt3c_io_write(iobase, 0x7006, 0x0000);
 552         bt3c_io_write(iobase, 0x7005, 0x0000);
 553         bt3c_io_write(iobase, 0x7001, 0x0000);
 554
 555         return err;
 556 }
 557
 558
 559 static int bt3c_open(bt3c_info_t *info)
 560 {
 561         const struct firmware *firmware;
 562         struct hci_dev *hdev;
 563         int err;
 564
 565         spin_lock_init(&(info->lock));
 566
 567         skb_queue_head_init(&(info->txq));
 568
 569         info->rx_state = RECV_WAIT_PACKET_TYPE;
 570         info->rx_count = 0;
 571         info->rx_skb = NULL;
 572
 573         /* Initialize HCI device */
 574         hdev = hci_alloc_dev();
 575         if (!hdev) {
 576                 BT_ERR("Can't allocate HCI device");
 577                 return -ENOMEM;
 578         }
 579
 580         info->hdev = hdev;
 581
 582         hdev->bus = HCI_PCCARD;
 583         hdev->driver_data = info;
 584         SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
 585
 586         hdev->open     = bt3c_hci_open;
 587         hdev->close    = bt3c_hci_close;
 588         hdev->flush    = bt3c_hci_flush;
 589         hdev->send     = bt3c_hci_send_frame;
 590         hdev->destruct = bt3c_hci_destruct;
 591         hdev->ioctl    = bt3c_hci_ioctl;
 592
 593         hdev->owner = THIS_MODULE;
 594
 595         /* Load firmware */
 596         err = request_firmware(&firmware, "BT3CPCC.bin", &info->p_dev->dev);
 597         if (err < 0) {
 598                 BT_ERR("Firmware request failed");
 599                 goto error;
 600         }
 601
 602         err = bt3c_load_firmware(info, firmware->data, firmware->size);
 603
 604         release_firmware(firmware);
 605
 606         if (err < 0) {
 607                 BT_ERR("Firmware loading failed");
 608                 goto error;
 609         }
 610
 611         /* Timeout before it is safe to send the first HCI packet */
 612         msleep(1000);
 613
 614         /* Register HCI device */
 615         err = hci_register_dev(hdev);
 616         if (err < 0) {
 617                 BT_ERR("Can't register HCI device");
 618                 goto error;
 619         }
 620
 621         return 0;
 622
 623 error:
 624         info->hdev = NULL;
 625         hci_free_dev(hdev);
 626         return err;
 627 }
 628
 629
 630 static int bt3c_close(bt3c_info_t *info)
 631 {
 632         struct hci_dev *hdev = info->hdev;
 633
 634         if (!hdev)
 635                 return -ENODEV;
 636
 637         bt3c_hci_close(hdev);
 638
 639         if (hci_unregister_dev(hdev) < 0)
 640                 BT_ERR("Can't unregister HCI device %s", hdev->name);
 641
 642         hci_free_dev(hdev);
 643
 644         return 0;
 645 }
 646
 647 static int bt3c_probe(struct pcmcia_device *link)
 648 {
 649         bt3c_info_t *info;
 650
 651         /* Create new info device */
 652         info = kzalloc(sizeof(*info), GFP_KERNEL);
 653         if (!info)
 654                 return -ENOMEM;
 655
 656         info->p_dev = link;
 657         link->priv = info;
 658
 659         link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
 660                 CONF_AUTO_SET_IO;
 661
 662         return bt3c_config(link);
 663 }
 664
 665
 666 static void bt3c_detach(struct pcmcia_device *link)
 667 {
 668         bt3c_info_t *info = link->priv;
 669
 670         bt3c_release(link);
 671         kfree(info);
 672 }
 673
 674 static int bt3c_check_config(struct pcmcia_device *p_dev, void *priv_data)
 675 {
 676         int *try = priv_data;
 677
 678         if (try == 0)
 679                 p_dev->io_lines = 16;
 680
 681         if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0))
 682                 return -EINVAL;
 683
 684         p_dev->resource[0]->end = 8;
 685         p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 686         p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 687
 688         return pcmcia_request_io(p_dev);
 689 }
 690
 691 static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
 692                                       void *priv_data)
 693 {
 694         static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 695         int j;
 696
 697         if (p_dev->io_lines > 3)
 698                 return -ENODEV;
 699
 700         p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 701         p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 702         p_dev->resource[0]->end = 8;
 703
 704         for (j = 0; j < 5; j++) {
 705                 p_dev->resource[0]->start = base[j];
 706                 p_dev->io_lines = base[j] ? 16 : 3;
 707                 if (!pcmcia_request_io(p_dev))
 708                         return 0;
 709         }
 710         return -ENODEV;
 711 }
 712
 713 static int bt3c_config(struct pcmcia_device *link)
 714 {
 715         bt3c_info_t *info = link->priv;
 716         int i;
 717         unsigned long try;
 718
 719         /* First pass: look for a config entry that looks normal.
 720            Two tries: without IO aliases, then with aliases */
 721         for (try = 0; try < 2; try++)
 722                 if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
 723                         goto found_port;
 724
 725         /* Second pass: try to find an entry that isn't picky about
 726            its base address, then try to grab any standard serial port
 727            address, and finally try to get any free port. */
 728         if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
 729                 goto found_port;
 730
 731         BT_ERR("No usable port range found");
 732         goto failed;
 733
 734 found_port:
 735         i = pcmcia_request_irq(link, &bt3c_interrupt);
 736         if (i != 0)
 737                 goto failed;
 738
 739         i = pcmcia_enable_device(link);
 740         if (i != 0)
 741                 goto failed;
 742
 743         if (bt3c_open(info) != 0)
 744                 goto failed;
 745
 746         return 0;
 747
 748 failed:
 749         bt3c_release(link);
 750         return -ENODEV;
 751 }
 752
 753
 754 static void bt3c_release(struct pcmcia_device *link)
 755 {
 756         bt3c_info_t *info = link->priv;
 757
 758         bt3c_close(info);
 759
 760         pcmcia_disable_device(link);
 761 }
 762
 763
 764 static struct pcmcia_device_id bt3c_ids[] = {
 765         PCMCIA_DEVICE_PROD_ID13("3COM", "Bluetooth PC Card", 0xefce0a31, 0xd4ce9b02),
 766         PCMCIA_DEVICE_NULL
 767 };
 768 MODULE_DEVICE_TABLE(pcmcia, bt3c_ids);
 769
 770 static struct pcmcia_driver bt3c_driver = {
 771         .owner          = THIS_MODULE,
 772         .name           = "bt3c_cs",
 773         .probe          = bt3c_probe,
 774         .remove         = bt3c_detach,
 775         .id_table       = bt3c_ids,
 776 };
 777
 778 static int __init init_bt3c_cs(void)
 779 {
 780         return pcmcia_register_driver(&bt3c_driver);
 781 }
 782
 783
 784 static void __exit exit_bt3c_cs(void)
 785 {
 786         pcmcia_unregister_driver(&bt3c_driver);
 787 }
 788
 789 module_init(init_bt3c_cs);
 790 module_exit(exit_bt3c_cs);