MIPS: SB1250: Include correct header and fix a warning
[linux-2.6/linux-mips.git] / arch / mips / mipssim / sim_time.c
blob5492c42f76507cb8d3e1c23b746f371bc10e5434
1 #include <linux/types.h>
2 #include <linux/init.h>
3 #include <linux/kernel_stat.h>
4 #include <linux/sched.h>
5 #include <linux/spinlock.h>
6 #include <linux/interrupt.h>
7 #include <linux/mc146818rtc.h>
8 #include <linux/smp.h>
9 #include <linux/timex.h>
11 #include <asm/hardirq.h>
12 #include <asm/div64.h>
13 #include <asm/cpu.h>
14 #include <asm/time.h>
15 #include <asm/irq.h>
16 #include <asm/mc146818-time.h>
17 #include <asm/msc01_ic.h>
19 #include <asm/mips-boards/generic.h>
20 #include <asm/mips-boards/prom.h>
21 #include <asm/mips-boards/simint.h>
24 unsigned long cpu_khz;
27 * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect
29 static unsigned int __init estimate_cpu_frequency(void)
31 unsigned int prid = read_c0_prid() & 0xffff00;
32 unsigned int count;
34 #if 1
36 * hardwire the board frequency to 12MHz.
39 if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
40 (prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
41 count = 12000000;
42 else
43 count = 6000000;
44 #else
45 unsigned int flags;
47 local_irq_save(flags);
49 /* Start counter exactly on falling edge of update flag */
50 while (CMOS_READ(RTC_REG_A) & RTC_UIP);
51 while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
53 /* Start r4k counter. */
54 write_c0_count(0);
56 /* Read counter exactly on falling edge of update flag */
57 while (CMOS_READ(RTC_REG_A) & RTC_UIP);
58 while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
60 count = read_c0_count();
62 /* restore interrupts */
63 local_irq_restore(flags);
64 #endif
66 mips_hpt_frequency = count;
68 if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
69 (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
70 count *= 2;
72 count += 5000; /* round */
73 count -= count%10000;
75 return count;
78 static int mips_cpu_timer_irq;
80 static void mips_timer_dispatch(void)
82 do_IRQ(mips_cpu_timer_irq);
86 unsigned __cpuinit get_c0_compare_int(void)
88 #ifdef MSC01E_INT_BASE
89 if (cpu_has_veic) {
90 set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
91 mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
93 return mips_cpu_timer_irq;
95 #endif
96 if (cpu_has_vint)
97 set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
98 mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
100 return mips_cpu_timer_irq;
103 void __init plat_time_init(void)
105 unsigned int est_freq;
107 /* Set Data mode - binary. */
108 CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
110 est_freq = estimate_cpu_frequency();
112 printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
113 (est_freq % 1000000) * 100 / 1000000);
115 cpu_khz = est_freq / 1000;