arch/parisc/kernel/setup.c

   1 /*
   2  *    Initial setup-routines for HP 9000 based hardware.
   3  *
   4  *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
   5  *    Modifications for PA-RISC (C) 1999 Helge Deller <deller@gmx.de>
   6  *    Modifications copyright 1999 SuSE GmbH (Philipp Rumpf)
   7  *    Modifications copyright 2000 Martin K. Petersen <mkp@mkp.net>
   8  *    Modifications copyright 2000 Philipp Rumpf <prumpf@tux.org>
   9  *    Modifications copyright 2001 Ryan Bradetich <rbradetich@uswest.net>
  10  *
  11  *    Initial PA-RISC Version: 04-23-1999 by Helge Deller
  12  *
  13  *    This program is free software; you can redistribute it and/or modify
  14  *    it under the terms of the GNU General Public License as published by
  15  *    the Free Software Foundation; either version 2, or (at your option)
  16  *    any later version.
  17  *
  18  *    This program is distributed in the hope that it will be useful,
  19  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *    GNU General Public License for more details.
  22  *
  23  *    You should have received a copy of the GNU General Public License
  24  *    along with this program; if not, write to the Free Software
  25  *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26  *
  27  */
  28
  29 #include <linux/kernel.h>
  30 #include <linux/initrd.h>
  31 #include <linux/init.h>
  32 #include <linux/console.h>
  33 #include <linux/seq_file.h>
  34 #define PCI_DEBUG
  35 #include <linux/pci.h>
  36 #undef PCI_DEBUG
  37 #include <linux/proc_fs.h>
  38
  39 #include <asm/processor.h>
  40 #include <asm/pdc.h>
  41 #include <asm/led.h>
  42 #include <asm/machdep.h>        /* for pa7300lc_init() proto */
  43 #include <asm/pdc_chassis.h>
  44 #include <asm/io.h>
  45 #include <asm/setup.h>
  46 #include <asm/unwind.h>
  47
  48 static char __initdata command_line[COMMAND_LINE_SIZE];
  49
  50 /* Intended for ccio/sba/cpu statistics under /proc/bus/{runway|gsc} */
  51 struct proc_dir_entry * proc_runway_root __read_mostly = NULL;
  52 struct proc_dir_entry * proc_gsc_root __read_mostly = NULL;
  53 struct proc_dir_entry * proc_mckinley_root __read_mostly = NULL;
  54
  55 #if !defined(CONFIG_PA20) && (defined(CONFIG_IOMMU_CCIO) || defined(CONFIG_IOMMU_SBA))
  56 int parisc_bus_is_phys __read_mostly = 1;       /* Assume no IOMMU is present */
  57 EXPORT_SYMBOL(parisc_bus_is_phys);
  58 #endif
  59
  60 void __init setup_cmdline(char **cmdline_p)
  61 {
  62         extern unsigned int boot_args[];
  63
  64         /* Collect stuff passed in from the boot loader */
  65
  66         /* boot_args[0] is free-mem start, boot_args[1] is ptr to command line */
  67         if (boot_args[0] < 64) {
  68                 /* called from hpux boot loader */
  69                 boot_command_line[0] = '\0';
  70         } else {
  71                 strcpy(boot_command_line, (char *)__va(boot_args[1]));
  72
  73 #ifdef CONFIG_BLK_DEV_INITRD
  74                 if (boot_args[2] != 0) /* did palo pass us a ramdisk? */
  75                 {
  76                     initrd_start = (unsigned long)__va(boot_args[2]);
  77                     initrd_end = (unsigned long)__va(boot_args[3]);
  78                 }
  79 #endif
  80         }
  81
  82         strcpy(command_line, boot_command_line);
  83         *cmdline_p = command_line;
  84 }
  85
  86 #ifdef CONFIG_PA11
  87 void __init dma_ops_init(void)
  88 {
  89         switch (boot_cpu_data.cpu_type) {
  90         case pcx:
  91                 /*
  92                  * We've got way too many dependencies on 1.1 semantics
  93                  * to support 1.0 boxes at this point.
  94                  */
  95                 panic(  "PA-RISC Linux currently only supports machines that conform to\n"
  96                         "the PA-RISC 1.1 or 2.0 architecture specification.\n");
  97
  98         case pcxs:
  99         case pcxt:
 100                 hppa_dma_ops = &pcx_dma_ops;
 101                 break;
 102         case pcxl2:
 103                 pa7300lc_init();
 104         case pcxl: /* falls through */
 105                 hppa_dma_ops = &pcxl_dma_ops;
 106                 break;
 107         default:
 108                 break;
 109         }
 110 }
 111 #endif
 112
 113 extern int init_per_cpu(int cpuid);
 114 extern void collect_boot_cpu_data(void);
 115
 116 void __init setup_arch(char **cmdline_p)
 117 {
 118 #ifdef CONFIG_64BIT
 119         extern int parisc_narrow_firmware;
 120 #endif
 121         unwind_init();
 122
 123         init_per_cpu(smp_processor_id());       /* Set Modes & Enable FP */
 124
 125 #ifdef CONFIG_64BIT
 126         printk(KERN_INFO "The 64-bit Kernel has started...\n");
 127 #else
 128         printk(KERN_INFO "The 32-bit Kernel has started...\n");
 129 #endif
 130
 131         pdc_console_init();
 132
 133 #ifdef CONFIG_64BIT
 134         if(parisc_narrow_firmware) {
 135                 printk(KERN_INFO "Kernel is using PDC in 32-bit mode.\n");
 136         }
 137 #endif
 138         setup_pdc();
 139         setup_cmdline(cmdline_p);
 140         collect_boot_cpu_data();
 141         do_memory_inventory();  /* probe for physical memory */
 142         parisc_cache_init();
 143         paging_init();
 144
 145 #ifdef CONFIG_CHASSIS_LCD_LED
 146         /* initialize the LCD/LED after boot_cpu_data is available ! */
 147         led_init();             /* LCD/LED initialization */
 148 #endif
 149
 150 #ifdef CONFIG_PA11
 151         dma_ops_init();
 152 #endif
 153
 154 #if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
 155         conswitchp = &dummy_con;        /* we use take_over_console() later ! */
 156 #endif
 157
 158 }
 159
 160 /*
 161  * Display CPU info for all CPUs.
 162  * for parisc this is in processor.c
 163  */
 164 extern int show_cpuinfo (struct seq_file *m, void *v);
 165
 166 static void *
 167 c_start (struct seq_file *m, loff_t *pos)
 168 {
 169         /* Looks like the caller will call repeatedly until we return
 170          * 0, signaling EOF perhaps.  This could be used to sequence
 171          * through CPUs for example.  Since we print all cpu info in our
 172          * show_cpuinfo() disregarding 'pos' (which I assume is 'v' above)
 173          * we only allow for one "position".  */
 174         return ((long)*pos < 1) ? (void *)1 : NULL;
 175 }
 176
 177 static void *
 178 c_next (struct seq_file *m, void *v, loff_t *pos)
 179 {
 180         ++*pos;
 181         return c_start(m, pos);
 182 }
 183
 184 static void
 185 c_stop (struct seq_file *m, void *v)
 186 {
 187 }
 188
 189 const struct seq_operations cpuinfo_op = {
 190         .start  = c_start,
 191         .next   = c_next,
 192         .stop   = c_stop,
 193         .show   = show_cpuinfo
 194 };
 195
 196 static void __init parisc_proc_mkdir(void)
 197 {
 198         /*
 199         ** Can't call proc_mkdir() until after proc_root_init() has been
 200         ** called by start_kernel(). In other words, this code can't
 201         ** live in arch/.../setup.c because start_parisc() calls
 202         ** start_kernel().
 203         */
 204         switch (boot_cpu_data.cpu_type) {
 205         case pcxl:
 206         case pcxl2:
 207                 if (NULL == proc_gsc_root)
 208                 {
 209                         proc_gsc_root = proc_mkdir("bus/gsc", NULL);
 210                 }
 211                 break;
 212         case pcxt_:
 213         case pcxu:
 214         case pcxu_:
 215         case pcxw:
 216         case pcxw_:
 217         case pcxw2:
 218                 if (NULL == proc_runway_root)
 219                 {
 220                         proc_runway_root = proc_mkdir("bus/runway", NULL);
 221                 }
 222                 break;
 223         case mako:
 224         case mako2:
 225                 if (NULL == proc_mckinley_root)
 226                 {
 227                         proc_mckinley_root = proc_mkdir("bus/mckinley", NULL);
 228                 }
 229                 break;
 230         default:
 231                 /* FIXME: this was added to prevent the compiler
 232                  * complaining about missing pcx, pcxs and pcxt
 233                  * I'm assuming they have neither gsc nor runway */
 234                 break;
 235         }
 236 }
 237
 238 static struct resource central_bus = {
 239         .name   = "Central Bus",
 240         .start  = F_EXTEND(0xfff80000),
 241         .end    = F_EXTEND(0xfffaffff),
 242         .flags  = IORESOURCE_MEM,
 243 };
 244
 245 static struct resource local_broadcast = {
 246         .name   = "Local Broadcast",
 247         .start  = F_EXTEND(0xfffb0000),
 248         .end    = F_EXTEND(0xfffdffff),
 249         .flags  = IORESOURCE_MEM,
 250 };
 251
 252 static struct resource global_broadcast = {
 253         .name   = "Global Broadcast",
 254         .start  = F_EXTEND(0xfffe0000),
 255         .end    = F_EXTEND(0xffffffff),
 256         .flags  = IORESOURCE_MEM,
 257 };
 258
 259 static int __init parisc_init_resources(void)
 260 {
 261         int result;
 262
 263         result = request_resource(&iomem_resource, &central_bus);
 264         if (result < 0) {
 265                 printk(KERN_ERR
 266                        "%s: failed to claim %s address space!\n",
 267                        __FILE__, central_bus.name);
 268                 return result;
 269         }
 270
 271         result = request_resource(&iomem_resource, &local_broadcast);
 272         if (result < 0) {
 273                 printk(KERN_ERR
 274                        "%s: failed to claim %saddress space!\n",
 275                        __FILE__, local_broadcast.name);
 276                 return result;
 277         }
 278
 279         result = request_resource(&iomem_resource, &global_broadcast);
 280         if (result < 0) {
 281                 printk(KERN_ERR
 282                        "%s: failed to claim %s address space!\n",
 283                        __FILE__, global_broadcast.name);
 284                 return result;
 285         }
 286
 287         return 0;
 288 }
 289
 290 extern void gsc_init(void);
 291 extern void processor_init(void);
 292 extern void ccio_init(void);
 293 extern void hppb_init(void);
 294 extern void dino_init(void);
 295 extern void iosapic_init(void);
 296 extern void lba_init(void);
 297 extern void sba_init(void);
 298 extern void eisa_init(void);
 299
 300 static int __init parisc_init(void)
 301 {
 302         u32 osid = (OS_ID_LINUX << 16);
 303
 304         parisc_proc_mkdir();
 305         parisc_init_resources();
 306         do_device_inventory();                  /* probe for hardware */
 307
 308         parisc_pdc_chassis_init();
 309
 310         /* set up a new led state on systems shipped LED State panel */
 311         pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BSTART);
 312
 313         /* tell PDC we're Linux. Nevermind failure. */
 314         pdc_stable_write(0x40, &osid, sizeof(osid));
 315
 316         processor_init();
 317         printk(KERN_INFO "CPU(s): %d x %s at %d.%06d MHz\n",
 318                         num_present_cpus(),
 319                         boot_cpu_data.cpu_name,
 320                         boot_cpu_data.cpu_hz / 1000000,
 321                         boot_cpu_data.cpu_hz % 1000000  );
 322
 323         parisc_setup_cache_timing();
 324
 325         /* These are in a non-obvious order, will fix when we have an iotree */
 326 #if defined(CONFIG_IOSAPIC)
 327         iosapic_init();
 328 #endif
 329 #if defined(CONFIG_IOMMU_SBA)
 330         sba_init();
 331 #endif
 332 #if defined(CONFIG_PCI_LBA)
 333         lba_init();
 334 #endif
 335
 336         /* CCIO before any potential subdevices */
 337 #if defined(CONFIG_IOMMU_CCIO)
 338         ccio_init();
 339 #endif
 340
 341         /*
 342          * Need to register Asp & Wax before the EISA adapters for the IRQ
 343          * regions.  EISA must come before PCI to be sure it gets IRQ region
 344          * 0.
 345          */
 346 #if defined(CONFIG_GSC_LASI) || defined(CONFIG_GSC_WAX)
 347         gsc_init();
 348 #endif
 349 #ifdef CONFIG_EISA
 350         eisa_init();
 351 #endif
 352
 353 #if defined(CONFIG_HPPB)
 354         hppb_init();
 355 #endif
 356
 357 #if defined(CONFIG_GSC_DINO)
 358         dino_init();
 359 #endif
 360
 361 #ifdef CONFIG_CHASSIS_LCD_LED
 362         register_led_regions(); /* register LED port info in procfs */
 363 #endif
 364
 365         return 0;
 366 }
 367 arch_initcall(parisc_init);
 368
 369 void start_parisc(void)
 370 {
 371         extern void start_kernel(void);
 372
 373         int ret, cpunum;
 374         struct pdc_coproc_cfg coproc_cfg;
 375
 376         cpunum = smp_processor_id();
 377
 378         set_firmware_width_unlocked();
 379
 380         ret = pdc_coproc_cfg_unlocked(&coproc_cfg);
 381         if (ret >= 0 && coproc_cfg.ccr_functional) {
 382                 mtctl(coproc_cfg.ccr_functional, 10);
 383
 384                 per_cpu(cpu_data, cpunum).fp_rev = coproc_cfg.revision;
 385                 per_cpu(cpu_data, cpunum).fp_model = coproc_cfg.model;
 386
 387                 asm volatile ("fstd     %fr0,8(%sp)");
 388         } else {
 389                 panic("must have an fpu to boot linux");
 390         }
 391
 392         start_kernel();
 393         // not reached
 394 }