2 * BSS client mode implementation
3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/delay.h>
15 #include <linux/if_ether.h>
16 #include <linux/skbuff.h>
17 #include <linux/if_arp.h>
18 #include <linux/etherdevice.h>
19 #include <linux/rtnetlink.h>
20 #include <linux/pm_qos_params.h>
21 #include <linux/crc32.h>
22 #include <linux/slab.h>
23 #include <net/mac80211.h>
24 #include <asm/unaligned.h>
26 #include "ieee80211_i.h"
27 #include "driver-ops.h"
31 #define IEEE80211_MAX_PROBE_TRIES 5
34 * beacon loss detection timeout
35 * XXX: should depend on beacon interval
37 #define IEEE80211_BEACON_LOSS_TIME (2 * HZ)
39 * Time the connection can be idle before we probe
40 * it to see if we can still talk to the AP.
42 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
44 * Time we wait for a probe response after sending
45 * a probe request because of beacon loss or for
46 * checking the connection still works.
48 #define IEEE80211_PROBE_WAIT (HZ / 2)
50 #define TMR_RUNNING_TIMER 0
51 #define TMR_RUNNING_CHANSW 1
54 * All cfg80211 functions have to be called outside a locked
55 * section so that they can acquire a lock themselves... This
56 * is much simpler than queuing up things in cfg80211, but we
57 * do need some indirection for that here.
60 /* no action required */
63 /* caller must call cfg80211_send_rx_auth() */
64 RX_MGMT_CFG80211_AUTH
,
66 /* caller must call cfg80211_send_rx_assoc() */
67 RX_MGMT_CFG80211_ASSOC
,
69 /* caller must call cfg80211_send_deauth() */
70 RX_MGMT_CFG80211_DEAUTH
,
72 /* caller must call cfg80211_send_disassoc() */
73 RX_MGMT_CFG80211_DISASSOC
,
75 /* caller must tell cfg80211 about internal error */
76 RX_MGMT_CFG80211_ASSOC_ERROR
,
80 static inline void ASSERT_MGD_MTX(struct ieee80211_if_managed
*ifmgd
)
82 WARN_ON(!mutex_is_locked(&ifmgd
->mtx
));
86 * We can have multiple work items (and connection probing)
87 * scheduling this timer, but we need to take care to only
88 * reschedule it when it should fire _earlier_ than it was
89 * asked for before, or if it's not pending right now. This
90 * function ensures that. Note that it then is required to
91 * run this function for all timeouts after the first one
92 * has happened -- the work that runs from this timer will
95 static void run_again(struct ieee80211_if_managed
*ifmgd
,
96 unsigned long timeout
)
98 ASSERT_MGD_MTX(ifmgd
);
100 if (!timer_pending(&ifmgd
->timer
) ||
101 time_before(timeout
, ifmgd
->timer
.expires
))
102 mod_timer(&ifmgd
->timer
, timeout
);
105 static void mod_beacon_timer(struct ieee80211_sub_if_data
*sdata
)
107 if (sdata
->local
->hw
.flags
& IEEE80211_HW_BEACON_FILTER
)
110 mod_timer(&sdata
->u
.mgd
.bcn_mon_timer
,
111 round_jiffies_up(jiffies
+ IEEE80211_BEACON_LOSS_TIME
));
114 static int ecw2cw(int ecw
)
116 return (1 << ecw
) - 1;
120 * ieee80211_enable_ht should be called only after the operating band
121 * has been determined as ht configuration depends on the hw's
122 * HT abilities for a specific band.
124 static u32
ieee80211_enable_ht(struct ieee80211_sub_if_data
*sdata
,
125 struct ieee80211_ht_info
*hti
,
126 const u8
*bssid
, u16 ap_ht_cap_flags
)
128 struct ieee80211_local
*local
= sdata
->local
;
129 struct ieee80211_supported_band
*sband
;
130 struct sta_info
*sta
;
133 bool enable_ht
= true, ht_changed
;
134 enum nl80211_channel_type channel_type
= NL80211_CHAN_NO_HT
;
136 sband
= local
->hw
.wiphy
->bands
[local
->hw
.conf
.channel
->band
];
138 /* HT is not supported */
139 if (!sband
->ht_cap
.ht_supported
)
142 /* check that channel matches the right operating channel */
143 if (local
->hw
.conf
.channel
->center_freq
!=
144 ieee80211_channel_to_frequency(hti
->control_chan
))
148 channel_type
= NL80211_CHAN_HT20
;
150 if (!(ap_ht_cap_flags
& IEEE80211_HT_CAP_40MHZ_INTOLERANT
) &&
151 (sband
->ht_cap
.cap
& IEEE80211_HT_CAP_SUP_WIDTH_20_40
) &&
152 (hti
->ht_param
& IEEE80211_HT_PARAM_CHAN_WIDTH_ANY
)) {
153 switch(hti
->ht_param
& IEEE80211_HT_PARAM_CHA_SEC_OFFSET
) {
154 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
155 if (!(local
->hw
.conf
.channel
->flags
&
156 IEEE80211_CHAN_NO_HT40PLUS
))
157 channel_type
= NL80211_CHAN_HT40PLUS
;
159 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
160 if (!(local
->hw
.conf
.channel
->flags
&
161 IEEE80211_CHAN_NO_HT40MINUS
))
162 channel_type
= NL80211_CHAN_HT40MINUS
;
168 ht_changed
= conf_is_ht(&local
->hw
.conf
) != enable_ht
||
169 channel_type
!= local
->hw
.conf
.channel_type
;
171 local
->oper_channel_type
= channel_type
;
174 /* channel_type change automatically detected */
175 ieee80211_hw_config(local
, 0);
178 sta
= sta_info_get(sdata
, bssid
);
180 rate_control_rate_update(local
, sband
, sta
,
181 IEEE80211_RC_HT_CHANGED
,
182 local
->oper_channel_type
);
190 ht_opmode
= le16_to_cpu(hti
->operation_mode
);
192 /* if bss configuration changed store the new one */
193 if (!sdata
->ht_opmode_valid
||
194 sdata
->vif
.bss_conf
.ht_operation_mode
!= ht_opmode
) {
195 changed
|= BSS_CHANGED_HT
;
196 sdata
->vif
.bss_conf
.ht_operation_mode
= ht_opmode
;
197 sdata
->ht_opmode_valid
= true;
203 /* frame sending functions */
205 static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data
*sdata
,
206 const u8
*bssid
, u16 stype
, u16 reason
,
209 struct ieee80211_local
*local
= sdata
->local
;
210 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
212 struct ieee80211_mgmt
*mgmt
;
214 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ sizeof(*mgmt
));
216 printk(KERN_DEBUG
"%s: failed to allocate buffer for "
217 "deauth/disassoc frame\n", sdata
->name
);
220 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
222 mgmt
= (struct ieee80211_mgmt
*) skb_put(skb
, 24);
224 memcpy(mgmt
->da
, bssid
, ETH_ALEN
);
225 memcpy(mgmt
->sa
, sdata
->vif
.addr
, ETH_ALEN
);
226 memcpy(mgmt
->bssid
, bssid
, ETH_ALEN
);
227 mgmt
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
| stype
);
229 /* u.deauth.reason_code == u.disassoc.reason_code */
230 mgmt
->u
.deauth
.reason_code
= cpu_to_le16(reason
);
232 if (stype
== IEEE80211_STYPE_DEAUTH
)
234 __cfg80211_send_deauth(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
236 cfg80211_send_deauth(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
239 __cfg80211_send_disassoc(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
241 cfg80211_send_disassoc(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
242 if (!(ifmgd
->flags
& IEEE80211_STA_MFP_ENABLED
))
243 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
244 ieee80211_tx_skb(sdata
, skb
);
247 void ieee80211_send_pspoll(struct ieee80211_local
*local
,
248 struct ieee80211_sub_if_data
*sdata
)
250 struct ieee80211_pspoll
*pspoll
;
253 skb
= ieee80211_pspoll_get(&local
->hw
, &sdata
->vif
);
257 pspoll
= (struct ieee80211_pspoll
*) skb
->data
;
258 pspoll
->frame_control
|= cpu_to_le16(IEEE80211_FCTL_PM
);
260 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
261 ieee80211_tx_skb(sdata
, skb
);
264 void ieee80211_send_nullfunc(struct ieee80211_local
*local
,
265 struct ieee80211_sub_if_data
*sdata
,
269 struct ieee80211_hdr_3addr
*nullfunc
;
271 skb
= ieee80211_nullfunc_get(&local
->hw
, &sdata
->vif
);
275 nullfunc
= (struct ieee80211_hdr_3addr
*) skb
->data
;
277 nullfunc
->frame_control
|= cpu_to_le16(IEEE80211_FCTL_PM
);
279 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
280 ieee80211_tx_skb(sdata
, skb
);
283 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local
*local
,
284 struct ieee80211_sub_if_data
*sdata
)
287 struct ieee80211_hdr
*nullfunc
;
290 if (WARN_ON(sdata
->vif
.type
!= NL80211_IFTYPE_STATION
))
293 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ 30);
295 printk(KERN_DEBUG
"%s: failed to allocate buffer for 4addr "
296 "nullfunc frame\n", sdata
->name
);
299 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
301 nullfunc
= (struct ieee80211_hdr
*) skb_put(skb
, 30);
302 memset(nullfunc
, 0, 30);
303 fc
= cpu_to_le16(IEEE80211_FTYPE_DATA
| IEEE80211_STYPE_NULLFUNC
|
304 IEEE80211_FCTL_FROMDS
| IEEE80211_FCTL_TODS
);
305 nullfunc
->frame_control
= fc
;
306 memcpy(nullfunc
->addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
307 memcpy(nullfunc
->addr2
, sdata
->vif
.addr
, ETH_ALEN
);
308 memcpy(nullfunc
->addr3
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
309 memcpy(nullfunc
->addr4
, sdata
->vif
.addr
, ETH_ALEN
);
311 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
312 ieee80211_tx_skb(sdata
, skb
);
315 /* spectrum management related things */
316 static void ieee80211_chswitch_work(struct work_struct
*work
)
318 struct ieee80211_sub_if_data
*sdata
=
319 container_of(work
, struct ieee80211_sub_if_data
, u
.mgd
.chswitch_work
);
320 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
322 if (!ieee80211_sdata_running(sdata
))
325 mutex_lock(&ifmgd
->mtx
);
326 if (!ifmgd
->associated
)
329 sdata
->local
->oper_channel
= sdata
->local
->csa_channel
;
330 ieee80211_hw_config(sdata
->local
, IEEE80211_CONF_CHANGE_CHANNEL
);
332 /* XXX: shouldn't really modify cfg80211-owned data! */
333 ifmgd
->associated
->channel
= sdata
->local
->oper_channel
;
335 ieee80211_wake_queues_by_reason(&sdata
->local
->hw
,
336 IEEE80211_QUEUE_STOP_REASON_CSA
);
338 ifmgd
->flags
&= ~IEEE80211_STA_CSA_RECEIVED
;
339 mutex_unlock(&ifmgd
->mtx
);
342 static void ieee80211_chswitch_timer(unsigned long data
)
344 struct ieee80211_sub_if_data
*sdata
=
345 (struct ieee80211_sub_if_data
*) data
;
346 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
348 if (sdata
->local
->quiescing
) {
349 set_bit(TMR_RUNNING_CHANSW
, &ifmgd
->timers_running
);
353 ieee80211_queue_work(&sdata
->local
->hw
, &ifmgd
->chswitch_work
);
356 void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data
*sdata
,
357 struct ieee80211_channel_sw_ie
*sw_elem
,
358 struct ieee80211_bss
*bss
)
360 struct cfg80211_bss
*cbss
=
361 container_of((void *)bss
, struct cfg80211_bss
, priv
);
362 struct ieee80211_channel
*new_ch
;
363 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
364 int new_freq
= ieee80211_channel_to_frequency(sw_elem
->new_ch_num
);
366 ASSERT_MGD_MTX(ifmgd
);
368 if (!ifmgd
->associated
)
371 if (sdata
->local
->scanning
)
374 /* Disregard subsequent beacons if we are already running a timer
377 if (ifmgd
->flags
& IEEE80211_STA_CSA_RECEIVED
)
380 new_ch
= ieee80211_get_channel(sdata
->local
->hw
.wiphy
, new_freq
);
381 if (!new_ch
|| new_ch
->flags
& IEEE80211_CHAN_DISABLED
)
384 sdata
->local
->csa_channel
= new_ch
;
386 if (sw_elem
->count
<= 1) {
387 ieee80211_queue_work(&sdata
->local
->hw
, &ifmgd
->chswitch_work
);
389 ieee80211_stop_queues_by_reason(&sdata
->local
->hw
,
390 IEEE80211_QUEUE_STOP_REASON_CSA
);
391 ifmgd
->flags
|= IEEE80211_STA_CSA_RECEIVED
;
392 mod_timer(&ifmgd
->chswitch_timer
,
394 msecs_to_jiffies(sw_elem
->count
*
395 cbss
->beacon_interval
));
399 static void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data
*sdata
,
400 u16 capab_info
, u8
*pwr_constr_elem
,
401 u8 pwr_constr_elem_len
)
403 struct ieee80211_conf
*conf
= &sdata
->local
->hw
.conf
;
405 if (!(capab_info
& WLAN_CAPABILITY_SPECTRUM_MGMT
))
408 /* Power constraint IE length should be 1 octet */
409 if (pwr_constr_elem_len
!= 1)
412 if ((*pwr_constr_elem
<= conf
->channel
->max_power
) &&
413 (*pwr_constr_elem
!= sdata
->local
->power_constr_level
)) {
414 sdata
->local
->power_constr_level
= *pwr_constr_elem
;
415 ieee80211_hw_config(sdata
->local
, 0);
420 static void ieee80211_enable_ps(struct ieee80211_local
*local
,
421 struct ieee80211_sub_if_data
*sdata
)
423 struct ieee80211_conf
*conf
= &local
->hw
.conf
;
426 * If we are scanning right now then the parameters will
427 * take effect when scan finishes.
432 if (conf
->dynamic_ps_timeout
> 0 &&
433 !(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_DYNAMIC_PS
)) {
434 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
435 msecs_to_jiffies(conf
->dynamic_ps_timeout
));
437 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)
438 ieee80211_send_nullfunc(local
, sdata
, 1);
440 if ((local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) &&
441 (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
))
444 conf
->flags
|= IEEE80211_CONF_PS
;
445 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
449 static void ieee80211_change_ps(struct ieee80211_local
*local
)
451 struct ieee80211_conf
*conf
= &local
->hw
.conf
;
453 if (local
->ps_sdata
) {
454 ieee80211_enable_ps(local
, local
->ps_sdata
);
455 } else if (conf
->flags
& IEEE80211_CONF_PS
) {
456 conf
->flags
&= ~IEEE80211_CONF_PS
;
457 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
458 del_timer_sync(&local
->dynamic_ps_timer
);
459 cancel_work_sync(&local
->dynamic_ps_enable_work
);
463 /* need to hold RTNL or interface lock */
464 void ieee80211_recalc_ps(struct ieee80211_local
*local
, s32 latency
)
466 struct ieee80211_sub_if_data
*sdata
, *found
= NULL
;
469 if (!(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_PS
)) {
470 local
->ps_sdata
= NULL
;
474 if (!list_empty(&local
->work_list
)) {
475 local
->ps_sdata
= NULL
;
479 list_for_each_entry(sdata
, &local
->interfaces
, list
) {
480 if (!ieee80211_sdata_running(sdata
))
482 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
488 if (count
== 1 && found
->u
.mgd
.powersave
&&
489 found
->u
.mgd
.associated
&&
490 found
->u
.mgd
.associated
->beacon_ies
&&
491 !(found
->u
.mgd
.flags
& (IEEE80211_STA_BEACON_POLL
|
492 IEEE80211_STA_CONNECTION_POLL
))) {
496 latency
= pm_qos_requirement(PM_QOS_NETWORK_LATENCY
);
498 beaconint_us
= ieee80211_tu_to_usec(
499 found
->vif
.bss_conf
.beacon_int
);
501 if (beaconint_us
> latency
) {
502 local
->ps_sdata
= NULL
;
504 struct ieee80211_bss
*bss
;
508 bss
= (void *)found
->u
.mgd
.associated
->priv
;
509 dtimper
= bss
->dtim_period
;
511 /* If the TIM IE is invalid, pretend the value is 1 */
514 else if (dtimper
> 1)
515 maxslp
= min_t(int, dtimper
,
516 latency
/ beaconint_us
);
518 local
->hw
.conf
.max_sleep_period
= maxslp
;
519 local
->hw
.conf
.ps_dtim_period
= dtimper
;
520 local
->ps_sdata
= found
;
523 local
->ps_sdata
= NULL
;
527 ieee80211_change_ps(local
);
530 void ieee80211_dynamic_ps_disable_work(struct work_struct
*work
)
532 struct ieee80211_local
*local
=
533 container_of(work
, struct ieee80211_local
,
534 dynamic_ps_disable_work
);
536 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
537 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
538 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
541 ieee80211_wake_queues_by_reason(&local
->hw
,
542 IEEE80211_QUEUE_STOP_REASON_PS
);
545 void ieee80211_dynamic_ps_enable_work(struct work_struct
*work
)
547 struct ieee80211_local
*local
=
548 container_of(work
, struct ieee80211_local
,
549 dynamic_ps_enable_work
);
550 struct ieee80211_sub_if_data
*sdata
= local
->ps_sdata
;
551 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
553 /* can only happen when PS was just disabled anyway */
557 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
)
560 if ((local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) &&
561 (!(ifmgd
->flags
& IEEE80211_STA_NULLFUNC_ACKED
)))
562 ieee80211_send_nullfunc(local
, sdata
, 1);
564 if (!((local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
) &&
565 (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)) ||
566 (ifmgd
->flags
& IEEE80211_STA_NULLFUNC_ACKED
)) {
567 ifmgd
->flags
&= ~IEEE80211_STA_NULLFUNC_ACKED
;
568 local
->hw
.conf
.flags
|= IEEE80211_CONF_PS
;
569 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
573 void ieee80211_dynamic_ps_timer(unsigned long data
)
575 struct ieee80211_local
*local
= (void *) data
;
577 if (local
->quiescing
|| local
->suspended
)
580 ieee80211_queue_work(&local
->hw
, &local
->dynamic_ps_enable_work
);
584 static void ieee80211_sta_wmm_params(struct ieee80211_local
*local
,
585 struct ieee80211_if_managed
*ifmgd
,
586 u8
*wmm_param
, size_t wmm_param_len
)
588 struct ieee80211_tx_queue_params params
;
591 u8
*pos
, uapsd_queues
= 0;
593 if (local
->hw
.queues
< 4)
599 if (wmm_param_len
< 8 || wmm_param
[5] /* version */ != 1)
602 if (ifmgd
->flags
& IEEE80211_STA_UAPSD_ENABLED
)
603 uapsd_queues
= local
->uapsd_queues
;
605 count
= wmm_param
[6] & 0x0f;
606 if (count
== ifmgd
->wmm_last_param_set
)
608 ifmgd
->wmm_last_param_set
= count
;
611 left
= wmm_param_len
- 8;
613 memset(¶ms
, 0, sizeof(params
));
616 for (; left
>= 4; left
-= 4, pos
+= 4) {
617 int aci
= (pos
[0] >> 5) & 0x03;
618 int acm
= (pos
[0] >> 4) & 0x01;
626 local
->wmm_acm
|= BIT(1) | BIT(2); /* BK/- */
627 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_BK
)
633 local
->wmm_acm
|= BIT(4) | BIT(5); /* CL/VI */
634 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VI
)
640 local
->wmm_acm
|= BIT(6) | BIT(7); /* VO/NC */
641 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VO
)
648 local
->wmm_acm
|= BIT(0) | BIT(3); /* BE/EE */
649 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_BE
)
654 params
.aifs
= pos
[0] & 0x0f;
655 params
.cw_max
= ecw2cw((pos
[1] & 0xf0) >> 4);
656 params
.cw_min
= ecw2cw(pos
[1] & 0x0f);
657 params
.txop
= get_unaligned_le16(pos
+ 2);
658 params
.uapsd
= uapsd
;
660 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
661 printk(KERN_DEBUG
"%s: WMM queue=%d aci=%d acm=%d aifs=%d "
662 "cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
663 wiphy_name(local
->hw
.wiphy
), queue
, aci
, acm
,
664 params
.aifs
, params
.cw_min
, params
.cw_max
, params
.txop
,
667 if (drv_conf_tx(local
, queue
, ¶ms
) && local
->ops
->conf_tx
)
668 printk(KERN_DEBUG
"%s: failed to set TX queue "
669 "parameters for queue %d\n",
670 wiphy_name(local
->hw
.wiphy
), queue
);
674 static u32
ieee80211_handle_bss_capability(struct ieee80211_sub_if_data
*sdata
,
675 u16 capab
, bool erp_valid
, u8 erp
)
677 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
680 bool use_short_preamble
;
684 use_protection
= (erp
& WLAN_ERP_USE_PROTECTION
) != 0;
685 use_short_preamble
= (erp
& WLAN_ERP_BARKER_PREAMBLE
) == 0;
687 use_protection
= false;
688 use_short_preamble
= !!(capab
& WLAN_CAPABILITY_SHORT_PREAMBLE
);
691 use_short_slot
= !!(capab
& WLAN_CAPABILITY_SHORT_SLOT_TIME
);
692 if (sdata
->local
->hw
.conf
.channel
->band
== IEEE80211_BAND_5GHZ
)
693 use_short_slot
= true;
695 if (use_protection
!= bss_conf
->use_cts_prot
) {
696 bss_conf
->use_cts_prot
= use_protection
;
697 changed
|= BSS_CHANGED_ERP_CTS_PROT
;
700 if (use_short_preamble
!= bss_conf
->use_short_preamble
) {
701 bss_conf
->use_short_preamble
= use_short_preamble
;
702 changed
|= BSS_CHANGED_ERP_PREAMBLE
;
705 if (use_short_slot
!= bss_conf
->use_short_slot
) {
706 bss_conf
->use_short_slot
= use_short_slot
;
707 changed
|= BSS_CHANGED_ERP_SLOT
;
713 static void ieee80211_set_associated(struct ieee80211_sub_if_data
*sdata
,
714 struct cfg80211_bss
*cbss
,
715 u32 bss_info_changed
)
717 struct ieee80211_bss
*bss
= (void *)cbss
->priv
;
718 struct ieee80211_local
*local
= sdata
->local
;
720 bss_info_changed
|= BSS_CHANGED_ASSOC
;
721 /* set timing information */
722 sdata
->vif
.bss_conf
.beacon_int
= cbss
->beacon_interval
;
723 sdata
->vif
.bss_conf
.timestamp
= cbss
->tsf
;
725 bss_info_changed
|= BSS_CHANGED_BEACON_INT
;
726 bss_info_changed
|= ieee80211_handle_bss_capability(sdata
,
727 cbss
->capability
, bss
->has_erp_value
, bss
->erp_value
);
729 sdata
->u
.mgd
.associated
= cbss
;
730 memcpy(sdata
->u
.mgd
.bssid
, cbss
->bssid
, ETH_ALEN
);
732 /* just to be sure */
733 sdata
->u
.mgd
.flags
&= ~(IEEE80211_STA_CONNECTION_POLL
|
734 IEEE80211_STA_BEACON_POLL
);
737 * Always handle WMM once after association regardless
738 * of the first value the AP uses. Setting -1 here has
739 * that effect because the AP values is an unsigned
742 sdata
->u
.mgd
.wmm_last_param_set
= -1;
744 ieee80211_led_assoc(local
, 1);
746 sdata
->vif
.bss_conf
.assoc
= 1;
748 * For now just always ask the driver to update the basic rateset
749 * when we have associated, we aren't checking whether it actually
752 bss_info_changed
|= BSS_CHANGED_BASIC_RATES
;
754 /* And the BSSID changed - we're associated now */
755 bss_info_changed
|= BSS_CHANGED_BSSID
;
757 ieee80211_bss_info_change_notify(sdata
, bss_info_changed
);
759 mutex_lock(&local
->iflist_mtx
);
760 ieee80211_recalc_ps(local
, -1);
761 ieee80211_recalc_smps(local
, sdata
);
762 mutex_unlock(&local
->iflist_mtx
);
764 netif_tx_start_all_queues(sdata
->dev
);
765 netif_carrier_on(sdata
->dev
);
768 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data
*sdata
)
770 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
771 struct ieee80211_local
*local
= sdata
->local
;
772 struct sta_info
*sta
;
773 u32 changed
= 0, config_changed
= 0;
776 ASSERT_MGD_MTX(ifmgd
);
778 if (WARN_ON(!ifmgd
->associated
))
781 memcpy(bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
);
783 ifmgd
->associated
= NULL
;
784 memset(ifmgd
->bssid
, 0, ETH_ALEN
);
787 * we need to commit the associated = NULL change because the
788 * scan code uses that to determine whether this iface should
789 * go to/wake up from powersave or not -- and could otherwise
790 * wake the queues erroneously.
795 * Thus, we can only afterwards stop the queues -- to account
796 * for the case where another CPU is finishing a scan at this
797 * time -- we don't want the scan code to enable queues.
800 netif_tx_stop_all_queues(sdata
->dev
);
801 netif_carrier_off(sdata
->dev
);
804 sta
= sta_info_get(sdata
, bssid
);
806 set_sta_flags(sta
, WLAN_STA_DISASSOC
);
807 ieee80211_sta_tear_down_BA_sessions(sta
);
811 changed
|= ieee80211_reset_erp_info(sdata
);
813 ieee80211_led_assoc(local
, 0);
814 changed
|= BSS_CHANGED_ASSOC
;
815 sdata
->vif
.bss_conf
.assoc
= false;
817 ieee80211_set_wmm_default(sdata
);
819 /* channel(_type) changes are handled by ieee80211_hw_config */
820 local
->oper_channel_type
= NL80211_CHAN_NO_HT
;
822 /* on the next assoc, re-program HT parameters */
823 sdata
->ht_opmode_valid
= false;
825 local
->power_constr_level
= 0;
827 del_timer_sync(&local
->dynamic_ps_timer
);
828 cancel_work_sync(&local
->dynamic_ps_enable_work
);
830 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
831 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
832 config_changed
|= IEEE80211_CONF_CHANGE_PS
;
835 ieee80211_hw_config(local
, config_changed
);
837 /* And the BSSID changed -- not very interesting here */
838 changed
|= BSS_CHANGED_BSSID
;
839 ieee80211_bss_info_change_notify(sdata
, changed
);
841 sta_info_destroy_addr(sdata
, bssid
);
844 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data
*sdata
,
845 struct ieee80211_hdr
*hdr
)
848 * We can postpone the mgd.timer whenever receiving unicast frames
849 * from AP because we know that the connection is working both ways
850 * at that time. But multicast frames (and hence also beacons) must
851 * be ignored here, because we need to trigger the timer during
852 * data idle periods for sending the periodic probe request to the
853 * AP we're connected to.
855 if (is_multicast_ether_addr(hdr
->addr1
))
858 mod_timer(&sdata
->u
.mgd
.conn_mon_timer
,
859 round_jiffies_up(jiffies
+ IEEE80211_CONNECTION_IDLE_TIME
));
862 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data
*sdata
)
864 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
867 ssid
= ieee80211_bss_get_ie(ifmgd
->associated
, WLAN_EID_SSID
);
868 ieee80211_send_probe_req(sdata
, ifmgd
->associated
->bssid
,
869 ssid
+ 2, ssid
[1], NULL
, 0);
871 ifmgd
->probe_send_count
++;
872 ifmgd
->probe_timeout
= jiffies
+ IEEE80211_PROBE_WAIT
;
873 run_again(ifmgd
, ifmgd
->probe_timeout
);
876 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data
*sdata
,
879 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
880 bool already
= false;
882 if (!ieee80211_sdata_running(sdata
))
885 if (sdata
->local
->scanning
)
888 if (sdata
->local
->tmp_channel
)
891 mutex_lock(&ifmgd
->mtx
);
893 if (!ifmgd
->associated
)
896 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
897 if (beacon
&& net_ratelimit())
898 printk(KERN_DEBUG
"%s: detected beacon loss from AP "
899 "- sending probe request\n", sdata
->name
);
903 * The driver/our work has already reported this event or the
904 * connection monitoring has kicked in and we have already sent
905 * a probe request. Or maybe the AP died and the driver keeps
906 * reporting until we disassociate...
908 * In either case we have to ignore the current call to this
909 * function (except for setting the correct probe reason bit)
910 * because otherwise we would reset the timer every time and
911 * never check whether we received a probe response!
913 if (ifmgd
->flags
& (IEEE80211_STA_BEACON_POLL
|
914 IEEE80211_STA_CONNECTION_POLL
))
918 ifmgd
->flags
|= IEEE80211_STA_BEACON_POLL
;
920 ifmgd
->flags
|= IEEE80211_STA_CONNECTION_POLL
;
925 mutex_lock(&sdata
->local
->iflist_mtx
);
926 ieee80211_recalc_ps(sdata
->local
, -1);
927 mutex_unlock(&sdata
->local
->iflist_mtx
);
929 ifmgd
->probe_send_count
= 0;
930 ieee80211_mgd_probe_ap_send(sdata
);
932 mutex_unlock(&ifmgd
->mtx
);
935 void ieee80211_beacon_loss_work(struct work_struct
*work
)
937 struct ieee80211_sub_if_data
*sdata
=
938 container_of(work
, struct ieee80211_sub_if_data
,
939 u
.mgd
.beacon_loss_work
);
941 ieee80211_mgd_probe_ap(sdata
, true);
944 void ieee80211_beacon_loss(struct ieee80211_vif
*vif
)
946 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
948 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->u
.mgd
.beacon_loss_work
);
950 EXPORT_SYMBOL(ieee80211_beacon_loss
);
952 static enum rx_mgmt_action __must_check
953 ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data
*sdata
,
954 struct ieee80211_mgmt
*mgmt
, size_t len
)
956 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
957 const u8
*bssid
= NULL
;
963 ASSERT_MGD_MTX(ifmgd
);
965 bssid
= ifmgd
->associated
->bssid
;
967 reason_code
= le16_to_cpu(mgmt
->u
.deauth
.reason_code
);
969 printk(KERN_DEBUG
"%s: deauthenticated from %pM (Reason: %u)\n",
970 sdata
->name
, bssid
, reason_code
);
972 ieee80211_set_disassoc(sdata
);
973 ieee80211_recalc_idle(sdata
->local
);
975 return RX_MGMT_CFG80211_DEAUTH
;
979 static enum rx_mgmt_action __must_check
980 ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data
*sdata
,
981 struct ieee80211_mgmt
*mgmt
, size_t len
)
983 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
989 ASSERT_MGD_MTX(ifmgd
);
991 if (WARN_ON(!ifmgd
->associated
))
994 if (WARN_ON(memcmp(ifmgd
->associated
->bssid
, mgmt
->sa
, ETH_ALEN
)))
997 reason_code
= le16_to_cpu(mgmt
->u
.disassoc
.reason_code
);
999 printk(KERN_DEBUG
"%s: disassociated from %pM (Reason: %u)\n",
1000 sdata
->name
, mgmt
->sa
, reason_code
);
1002 ieee80211_set_disassoc(sdata
);
1003 ieee80211_recalc_idle(sdata
->local
);
1004 return RX_MGMT_CFG80211_DISASSOC
;
1008 static bool ieee80211_assoc_success(struct ieee80211_work
*wk
,
1009 struct ieee80211_mgmt
*mgmt
, size_t len
)
1011 struct ieee80211_sub_if_data
*sdata
= wk
->sdata
;
1012 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1013 struct ieee80211_local
*local
= sdata
->local
;
1014 struct ieee80211_supported_band
*sband
;
1015 struct sta_info
*sta
;
1016 struct cfg80211_bss
*cbss
= wk
->assoc
.bss
;
1018 u32 rates
, basic_rates
;
1019 u16 capab_info
, aid
;
1020 struct ieee802_11_elems elems
;
1021 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
1024 bool have_higher_than_11mbit
= false;
1025 u16 ap_ht_cap_flags
;
1027 /* AssocResp and ReassocResp have identical structure */
1029 aid
= le16_to_cpu(mgmt
->u
.assoc_resp
.aid
);
1030 capab_info
= le16_to_cpu(mgmt
->u
.assoc_resp
.capab_info
);
1032 if ((aid
& (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
1033 printk(KERN_DEBUG
"%s: invalid aid value %d; bits 15:14 not "
1034 "set\n", sdata
->name
, aid
);
1035 aid
&= ~(BIT(15) | BIT(14));
1037 pos
= mgmt
->u
.assoc_resp
.variable
;
1038 ieee802_11_parse_elems(pos
, len
- (pos
- (u8
*) mgmt
), &elems
);
1040 if (!elems
.supp_rates
) {
1041 printk(KERN_DEBUG
"%s: no SuppRates element in AssocResp\n",
1048 sta
= sta_info_alloc(sdata
, cbss
->bssid
, GFP_KERNEL
);
1050 printk(KERN_DEBUG
"%s: failed to alloc STA entry for"
1051 " the AP\n", sdata
->name
);
1055 set_sta_flags(sta
, WLAN_STA_AUTH
| WLAN_STA_ASSOC
|
1057 if (!(ifmgd
->flags
& IEEE80211_STA_CONTROL_PORT
))
1058 set_sta_flags(sta
, WLAN_STA_AUTHORIZED
);
1062 sband
= local
->hw
.wiphy
->bands
[local
->hw
.conf
.channel
->band
];
1064 for (i
= 0; i
< elems
.supp_rates_len
; i
++) {
1065 int rate
= (elems
.supp_rates
[i
] & 0x7f) * 5;
1066 bool is_basic
= !!(elems
.supp_rates
[i
] & 0x80);
1069 have_higher_than_11mbit
= true;
1071 for (j
= 0; j
< sband
->n_bitrates
; j
++) {
1072 if (sband
->bitrates
[j
].bitrate
== rate
) {
1075 basic_rates
|= BIT(j
);
1081 for (i
= 0; i
< elems
.ext_supp_rates_len
; i
++) {
1082 int rate
= (elems
.ext_supp_rates
[i
] & 0x7f) * 5;
1083 bool is_basic
= !!(elems
.ext_supp_rates
[i
] & 0x80);
1086 have_higher_than_11mbit
= true;
1088 for (j
= 0; j
< sband
->n_bitrates
; j
++) {
1089 if (sband
->bitrates
[j
].bitrate
== rate
) {
1092 basic_rates
|= BIT(j
);
1098 sta
->sta
.supp_rates
[local
->hw
.conf
.channel
->band
] = rates
;
1099 sdata
->vif
.bss_conf
.basic_rates
= basic_rates
;
1101 /* cf. IEEE 802.11 9.2.12 */
1102 if (local
->hw
.conf
.channel
->band
== IEEE80211_BAND_2GHZ
&&
1103 have_higher_than_11mbit
)
1104 sdata
->flags
|= IEEE80211_SDATA_OPERATING_GMODE
;
1106 sdata
->flags
&= ~IEEE80211_SDATA_OPERATING_GMODE
;
1108 if (elems
.ht_cap_elem
&& !(ifmgd
->flags
& IEEE80211_STA_DISABLE_11N
))
1109 ieee80211_ht_cap_ie_to_sta_ht_cap(sband
,
1110 elems
.ht_cap_elem
, &sta
->sta
.ht_cap
);
1112 ap_ht_cap_flags
= sta
->sta
.ht_cap
.cap
;
1114 rate_control_rate_init(sta
);
1116 if (ifmgd
->flags
& IEEE80211_STA_MFP_ENABLED
)
1117 set_sta_flags(sta
, WLAN_STA_MFP
);
1119 if (elems
.wmm_param
)
1120 set_sta_flags(sta
, WLAN_STA_WME
);
1122 err
= sta_info_insert(sta
);
1125 printk(KERN_DEBUG
"%s: failed to insert STA entry for"
1126 " the AP (error %d)\n", sdata
->name
, err
);
1130 if (elems
.wmm_param
)
1131 ieee80211_sta_wmm_params(local
, ifmgd
, elems
.wmm_param
,
1132 elems
.wmm_param_len
);
1134 ieee80211_set_wmm_default(sdata
);
1136 local
->oper_channel
= wk
->chan
;
1138 if (elems
.ht_info_elem
&& elems
.wmm_param
&&
1139 (sdata
->local
->hw
.queues
>= 4) &&
1140 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_11N
))
1141 changed
|= ieee80211_enable_ht(sdata
, elems
.ht_info_elem
,
1142 cbss
->bssid
, ap_ht_cap_flags
);
1144 /* set AID and assoc capability,
1145 * ieee80211_set_associated() will tell the driver */
1146 bss_conf
->aid
= aid
;
1147 bss_conf
->assoc_capability
= capab_info
;
1148 ieee80211_set_associated(sdata
, cbss
, changed
);
1151 * If we're using 4-addr mode, let the AP know that we're
1152 * doing so, so that it can create the STA VLAN on its side
1154 if (ifmgd
->use_4addr
)
1155 ieee80211_send_4addr_nullfunc(local
, sdata
);
1158 * Start timer to probe the connection to the AP now.
1159 * Also start the timer that will detect beacon loss.
1161 ieee80211_sta_rx_notify(sdata
, (struct ieee80211_hdr
*)mgmt
);
1162 mod_beacon_timer(sdata
);
1168 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data
*sdata
,
1169 struct ieee80211_mgmt
*mgmt
,
1171 struct ieee80211_rx_status
*rx_status
,
1172 struct ieee802_11_elems
*elems
,
1175 struct ieee80211_local
*local
= sdata
->local
;
1177 struct ieee80211_bss
*bss
;
1178 struct ieee80211_channel
*channel
;
1179 bool need_ps
= false;
1181 if (sdata
->u
.mgd
.associated
) {
1182 bss
= (void *)sdata
->u
.mgd
.associated
->priv
;
1183 /* not previously set so we may need to recalc */
1184 need_ps
= !bss
->dtim_period
;
1187 if (elems
->ds_params
&& elems
->ds_params_len
== 1)
1188 freq
= ieee80211_channel_to_frequency(elems
->ds_params
[0]);
1190 freq
= rx_status
->freq
;
1192 channel
= ieee80211_get_channel(local
->hw
.wiphy
, freq
);
1194 if (!channel
|| channel
->flags
& IEEE80211_CHAN_DISABLED
)
1197 bss
= ieee80211_bss_info_update(local
, rx_status
, mgmt
, len
, elems
,
1200 ieee80211_rx_bss_put(local
, bss
);
1202 if (!sdata
->u
.mgd
.associated
)
1206 mutex_lock(&local
->iflist_mtx
);
1207 ieee80211_recalc_ps(local
, -1);
1208 mutex_unlock(&local
->iflist_mtx
);
1211 if (elems
->ch_switch_elem
&& (elems
->ch_switch_elem_len
== 3) &&
1212 (memcmp(mgmt
->bssid
, sdata
->u
.mgd
.associated
->bssid
,
1214 struct ieee80211_channel_sw_ie
*sw_elem
=
1215 (struct ieee80211_channel_sw_ie
*)elems
->ch_switch_elem
;
1216 ieee80211_sta_process_chanswitch(sdata
, sw_elem
, bss
);
1221 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data
*sdata
,
1222 struct sk_buff
*skb
)
1224 struct ieee80211_mgmt
*mgmt
= (void *)skb
->data
;
1225 struct ieee80211_if_managed
*ifmgd
;
1226 struct ieee80211_rx_status
*rx_status
= (void *) skb
->cb
;
1227 size_t baselen
, len
= skb
->len
;
1228 struct ieee802_11_elems elems
;
1230 ifmgd
= &sdata
->u
.mgd
;
1232 ASSERT_MGD_MTX(ifmgd
);
1234 if (memcmp(mgmt
->da
, sdata
->vif
.addr
, ETH_ALEN
))
1235 return; /* ignore ProbeResp to foreign address */
1237 baselen
= (u8
*) mgmt
->u
.probe_resp
.variable
- (u8
*) mgmt
;
1241 ieee802_11_parse_elems(mgmt
->u
.probe_resp
.variable
, len
- baselen
,
1244 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
, false);
1246 if (ifmgd
->associated
&&
1247 memcmp(mgmt
->bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
) == 0 &&
1248 ifmgd
->flags
& (IEEE80211_STA_BEACON_POLL
|
1249 IEEE80211_STA_CONNECTION_POLL
)) {
1250 ifmgd
->flags
&= ~(IEEE80211_STA_CONNECTION_POLL
|
1251 IEEE80211_STA_BEACON_POLL
);
1252 mutex_lock(&sdata
->local
->iflist_mtx
);
1253 ieee80211_recalc_ps(sdata
->local
, -1);
1254 mutex_unlock(&sdata
->local
->iflist_mtx
);
1256 * We've received a probe response, but are not sure whether
1257 * we have or will be receiving any beacons or data, so let's
1258 * schedule the timers again, just in case.
1260 mod_beacon_timer(sdata
);
1261 mod_timer(&ifmgd
->conn_mon_timer
,
1262 round_jiffies_up(jiffies
+
1263 IEEE80211_CONNECTION_IDLE_TIME
));
1268 * This is the canonical list of information elements we care about,
1269 * the filter code also gives us all changes to the Microsoft OUI
1270 * (00:50:F2) vendor IE which is used for WMM which we need to track.
1272 * We implement beacon filtering in software since that means we can
1273 * avoid processing the frame here and in cfg80211, and userspace
1274 * will not be able to tell whether the hardware supports it or not.
1276 * XXX: This list needs to be dynamic -- userspace needs to be able to
1277 * add items it requires. It also needs to be able to tell us to
1278 * look out for other vendor IEs.
1280 static const u64 care_about_ies
=
1281 (1ULL << WLAN_EID_COUNTRY
) |
1282 (1ULL << WLAN_EID_ERP_INFO
) |
1283 (1ULL << WLAN_EID_CHANNEL_SWITCH
) |
1284 (1ULL << WLAN_EID_PWR_CONSTRAINT
) |
1285 (1ULL << WLAN_EID_HT_CAPABILITY
) |
1286 (1ULL << WLAN_EID_HT_INFORMATION
);
1288 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data
*sdata
,
1289 struct ieee80211_mgmt
*mgmt
,
1291 struct ieee80211_rx_status
*rx_status
)
1293 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1295 struct ieee802_11_elems elems
;
1296 struct ieee80211_local
*local
= sdata
->local
;
1298 bool erp_valid
, directed_tim
= false;
1303 ASSERT_MGD_MTX(ifmgd
);
1305 /* Process beacon from the current BSS */
1306 baselen
= (u8
*) mgmt
->u
.beacon
.variable
- (u8
*) mgmt
;
1310 if (rx_status
->freq
!= local
->hw
.conf
.channel
->center_freq
)
1314 * We might have received a number of frames, among them a
1315 * disassoc frame and a beacon...
1317 if (!ifmgd
->associated
)
1320 bssid
= ifmgd
->associated
->bssid
;
1323 * And in theory even frames from a different AP we were just
1324 * associated to a split-second ago!
1326 if (memcmp(bssid
, mgmt
->bssid
, ETH_ALEN
) != 0)
1329 if (ifmgd
->flags
& IEEE80211_STA_BEACON_POLL
) {
1330 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1331 if (net_ratelimit()) {
1332 printk(KERN_DEBUG
"%s: cancelling probereq poll due "
1333 "to a received beacon\n", sdata
->name
);
1336 ifmgd
->flags
&= ~IEEE80211_STA_BEACON_POLL
;
1337 mutex_lock(&local
->iflist_mtx
);
1338 ieee80211_recalc_ps(local
, -1);
1339 mutex_unlock(&local
->iflist_mtx
);
1343 * Push the beacon loss detection into the future since
1344 * we are processing a beacon from the AP just now.
1346 mod_beacon_timer(sdata
);
1348 ncrc
= crc32_be(0, (void *)&mgmt
->u
.beacon
.beacon_int
, 4);
1349 ncrc
= ieee802_11_parse_elems_crc(mgmt
->u
.beacon
.variable
,
1350 len
- baselen
, &elems
,
1351 care_about_ies
, ncrc
);
1353 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)
1354 directed_tim
= ieee80211_check_tim(elems
.tim
, elems
.tim_len
,
1357 if (ncrc
!= ifmgd
->beacon_crc
) {
1358 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
,
1361 ieee80211_sta_wmm_params(local
, ifmgd
, elems
.wmm_param
,
1362 elems
.wmm_param_len
);
1365 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) {
1367 if (local
->hw
.conf
.dynamic_ps_timeout
> 0) {
1368 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
1369 ieee80211_hw_config(local
,
1370 IEEE80211_CONF_CHANGE_PS
);
1371 ieee80211_send_nullfunc(local
, sdata
, 0);
1373 local
->pspolling
= true;
1376 * Here is assumed that the driver will be
1377 * able to send ps-poll frame and receive a
1378 * response even though power save mode is
1379 * enabled, but some drivers might require
1380 * to disable power save here. This needs
1381 * to be investigated.
1383 ieee80211_send_pspoll(local
, sdata
);
1388 if (ncrc
== ifmgd
->beacon_crc
)
1390 ifmgd
->beacon_crc
= ncrc
;
1392 if (elems
.erp_info
&& elems
.erp_info_len
>= 1) {
1394 erp_value
= elems
.erp_info
[0];
1398 changed
|= ieee80211_handle_bss_capability(sdata
,
1399 le16_to_cpu(mgmt
->u
.beacon
.capab_info
),
1400 erp_valid
, erp_value
);
1403 if (elems
.ht_cap_elem
&& elems
.ht_info_elem
&& elems
.wmm_param
&&
1404 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_11N
)) {
1405 struct sta_info
*sta
;
1406 struct ieee80211_supported_band
*sband
;
1407 u16 ap_ht_cap_flags
;
1411 sta
= sta_info_get(sdata
, bssid
);
1412 if (WARN_ON(!sta
)) {
1417 sband
= local
->hw
.wiphy
->bands
[local
->hw
.conf
.channel
->band
];
1419 ieee80211_ht_cap_ie_to_sta_ht_cap(sband
,
1420 elems
.ht_cap_elem
, &sta
->sta
.ht_cap
);
1422 ap_ht_cap_flags
= sta
->sta
.ht_cap
.cap
;
1426 changed
|= ieee80211_enable_ht(sdata
, elems
.ht_info_elem
,
1427 bssid
, ap_ht_cap_flags
);
1430 /* Note: country IE parsing is done for us by cfg80211 */
1431 if (elems
.country_elem
) {
1432 /* TODO: IBSS also needs this */
1433 if (elems
.pwr_constr_elem
)
1434 ieee80211_handle_pwr_constr(sdata
,
1435 le16_to_cpu(mgmt
->u
.probe_resp
.capab_info
),
1436 elems
.pwr_constr_elem
,
1437 elems
.pwr_constr_elem_len
);
1440 ieee80211_bss_info_change_notify(sdata
, changed
);
1443 ieee80211_rx_result
ieee80211_sta_rx_mgmt(struct ieee80211_sub_if_data
*sdata
,
1444 struct sk_buff
*skb
)
1446 struct ieee80211_local
*local
= sdata
->local
;
1447 struct ieee80211_mgmt
*mgmt
;
1451 return RX_DROP_MONITOR
;
1453 mgmt
= (struct ieee80211_mgmt
*) skb
->data
;
1454 fc
= le16_to_cpu(mgmt
->frame_control
);
1456 switch (fc
& IEEE80211_FCTL_STYPE
) {
1457 case IEEE80211_STYPE_PROBE_RESP
:
1458 case IEEE80211_STYPE_BEACON
:
1459 case IEEE80211_STYPE_DEAUTH
:
1460 case IEEE80211_STYPE_DISASSOC
:
1461 case IEEE80211_STYPE_ACTION
:
1462 skb_queue_tail(&sdata
->u
.mgd
.skb_queue
, skb
);
1463 ieee80211_queue_work(&local
->hw
, &sdata
->u
.mgd
.work
);
1467 return RX_DROP_MONITOR
;
1470 static void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data
*sdata
,
1471 struct sk_buff
*skb
)
1473 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1474 struct ieee80211_rx_status
*rx_status
;
1475 struct ieee80211_mgmt
*mgmt
;
1476 enum rx_mgmt_action rma
= RX_MGMT_NONE
;
1479 rx_status
= (struct ieee80211_rx_status
*) skb
->cb
;
1480 mgmt
= (struct ieee80211_mgmt
*) skb
->data
;
1481 fc
= le16_to_cpu(mgmt
->frame_control
);
1483 mutex_lock(&ifmgd
->mtx
);
1485 if (ifmgd
->associated
&&
1486 memcmp(ifmgd
->associated
->bssid
, mgmt
->bssid
, ETH_ALEN
) == 0) {
1487 switch (fc
& IEEE80211_FCTL_STYPE
) {
1488 case IEEE80211_STYPE_BEACON
:
1489 ieee80211_rx_mgmt_beacon(sdata
, mgmt
, skb
->len
,
1492 case IEEE80211_STYPE_PROBE_RESP
:
1493 ieee80211_rx_mgmt_probe_resp(sdata
, skb
);
1495 case IEEE80211_STYPE_DEAUTH
:
1496 rma
= ieee80211_rx_mgmt_deauth(sdata
, mgmt
, skb
->len
);
1498 case IEEE80211_STYPE_DISASSOC
:
1499 rma
= ieee80211_rx_mgmt_disassoc(sdata
, mgmt
, skb
->len
);
1501 case IEEE80211_STYPE_ACTION
:
1502 if (mgmt
->u
.action
.category
!= WLAN_CATEGORY_SPECTRUM_MGMT
)
1505 ieee80211_sta_process_chanswitch(sdata
,
1506 &mgmt
->u
.action
.u
.chan_switch
.sw_elem
,
1507 (void *)ifmgd
->associated
->priv
);
1510 mutex_unlock(&ifmgd
->mtx
);
1516 case RX_MGMT_CFG80211_DEAUTH
:
1517 cfg80211_send_deauth(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
1519 case RX_MGMT_CFG80211_DISASSOC
:
1520 cfg80211_send_disassoc(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
1523 WARN(1, "unexpected: %d", rma
);
1528 mutex_unlock(&ifmgd
->mtx
);
1530 if (skb
->len
>= 24 + 2 /* mgmt + deauth reason */ &&
1531 (fc
& IEEE80211_FCTL_STYPE
) == IEEE80211_STYPE_DEAUTH
)
1532 cfg80211_send_deauth(sdata
->dev
, (u8
*)mgmt
, skb
->len
);
1538 static void ieee80211_sta_timer(unsigned long data
)
1540 struct ieee80211_sub_if_data
*sdata
=
1541 (struct ieee80211_sub_if_data
*) data
;
1542 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1543 struct ieee80211_local
*local
= sdata
->local
;
1545 if (local
->quiescing
) {
1546 set_bit(TMR_RUNNING_TIMER
, &ifmgd
->timers_running
);
1550 ieee80211_queue_work(&local
->hw
, &ifmgd
->work
);
1553 static void ieee80211_sta_work(struct work_struct
*work
)
1555 struct ieee80211_sub_if_data
*sdata
=
1556 container_of(work
, struct ieee80211_sub_if_data
, u
.mgd
.work
);
1557 struct ieee80211_local
*local
= sdata
->local
;
1558 struct ieee80211_if_managed
*ifmgd
;
1559 struct sk_buff
*skb
;
1561 if (!ieee80211_sdata_running(sdata
))
1564 if (local
->scanning
)
1567 if (WARN_ON(sdata
->vif
.type
!= NL80211_IFTYPE_STATION
))
1571 * ieee80211_queue_work() should have picked up most cases,
1572 * here we'll pick the the rest.
1574 if (WARN(local
->suspended
, "STA MLME work scheduled while "
1575 "going to suspend\n"))
1578 ifmgd
= &sdata
->u
.mgd
;
1580 /* first process frames to avoid timing out while a frame is pending */
1581 while ((skb
= skb_dequeue(&ifmgd
->skb_queue
)))
1582 ieee80211_sta_rx_queued_mgmt(sdata
, skb
);
1584 /* then process the rest of the work */
1585 mutex_lock(&ifmgd
->mtx
);
1587 if (ifmgd
->flags
& (IEEE80211_STA_BEACON_POLL
|
1588 IEEE80211_STA_CONNECTION_POLL
) &&
1589 ifmgd
->associated
) {
1592 memcpy(bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
);
1593 if (time_is_after_jiffies(ifmgd
->probe_timeout
))
1594 run_again(ifmgd
, ifmgd
->probe_timeout
);
1596 else if (ifmgd
->probe_send_count
< IEEE80211_MAX_PROBE_TRIES
) {
1597 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1598 printk(KERN_DEBUG
"No probe response from AP %pM"
1599 " after %dms, try %d\n", bssid
,
1600 (1000 * IEEE80211_PROBE_WAIT
)/HZ
,
1601 ifmgd
->probe_send_count
);
1603 ieee80211_mgd_probe_ap_send(sdata
);
1606 * We actually lost the connection ... or did we?
1609 ifmgd
->flags
&= ~(IEEE80211_STA_CONNECTION_POLL
|
1610 IEEE80211_STA_BEACON_POLL
);
1611 printk(KERN_DEBUG
"No probe response from AP %pM"
1612 " after %dms, disconnecting.\n",
1613 bssid
, (1000 * IEEE80211_PROBE_WAIT
)/HZ
);
1614 ieee80211_set_disassoc(sdata
);
1615 ieee80211_recalc_idle(local
);
1616 mutex_unlock(&ifmgd
->mtx
);
1618 * must be outside lock due to cfg80211,
1619 * but that's not a problem.
1621 ieee80211_send_deauth_disassoc(sdata
, bssid
,
1622 IEEE80211_STYPE_DEAUTH
,
1623 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
,
1625 mutex_lock(&ifmgd
->mtx
);
1629 mutex_unlock(&ifmgd
->mtx
);
1632 static void ieee80211_sta_bcn_mon_timer(unsigned long data
)
1634 struct ieee80211_sub_if_data
*sdata
=
1635 (struct ieee80211_sub_if_data
*) data
;
1636 struct ieee80211_local
*local
= sdata
->local
;
1638 if (local
->quiescing
)
1641 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->u
.mgd
.beacon_loss_work
);
1644 static void ieee80211_sta_conn_mon_timer(unsigned long data
)
1646 struct ieee80211_sub_if_data
*sdata
=
1647 (struct ieee80211_sub_if_data
*) data
;
1648 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1649 struct ieee80211_local
*local
= sdata
->local
;
1651 if (local
->quiescing
)
1654 ieee80211_queue_work(&local
->hw
, &ifmgd
->monitor_work
);
1657 static void ieee80211_sta_monitor_work(struct work_struct
*work
)
1659 struct ieee80211_sub_if_data
*sdata
=
1660 container_of(work
, struct ieee80211_sub_if_data
,
1661 u
.mgd
.monitor_work
);
1663 ieee80211_mgd_probe_ap(sdata
, false);
1666 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data
*sdata
)
1668 if (sdata
->vif
.type
== NL80211_IFTYPE_STATION
) {
1669 sdata
->u
.mgd
.flags
&= ~(IEEE80211_STA_BEACON_POLL
|
1670 IEEE80211_STA_CONNECTION_POLL
);
1672 /* let's probe the connection once */
1673 ieee80211_queue_work(&sdata
->local
->hw
,
1674 &sdata
->u
.mgd
.monitor_work
);
1675 /* and do all the other regular work too */
1676 ieee80211_queue_work(&sdata
->local
->hw
,
1677 &sdata
->u
.mgd
.work
);
1682 void ieee80211_sta_quiesce(struct ieee80211_sub_if_data
*sdata
)
1684 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1687 * we need to use atomic bitops for the running bits
1688 * only because both timers might fire at the same
1689 * time -- the code here is properly synchronised.
1692 cancel_work_sync(&ifmgd
->work
);
1693 cancel_work_sync(&ifmgd
->beacon_loss_work
);
1694 if (del_timer_sync(&ifmgd
->timer
))
1695 set_bit(TMR_RUNNING_TIMER
, &ifmgd
->timers_running
);
1697 cancel_work_sync(&ifmgd
->chswitch_work
);
1698 if (del_timer_sync(&ifmgd
->chswitch_timer
))
1699 set_bit(TMR_RUNNING_CHANSW
, &ifmgd
->timers_running
);
1701 cancel_work_sync(&ifmgd
->monitor_work
);
1702 /* these will just be re-established on connection */
1703 del_timer_sync(&ifmgd
->conn_mon_timer
);
1704 del_timer_sync(&ifmgd
->bcn_mon_timer
);
1707 void ieee80211_sta_restart(struct ieee80211_sub_if_data
*sdata
)
1709 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1711 if (test_and_clear_bit(TMR_RUNNING_TIMER
, &ifmgd
->timers_running
))
1712 add_timer(&ifmgd
->timer
);
1713 if (test_and_clear_bit(TMR_RUNNING_CHANSW
, &ifmgd
->timers_running
))
1714 add_timer(&ifmgd
->chswitch_timer
);
1718 /* interface setup */
1719 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data
*sdata
)
1721 struct ieee80211_if_managed
*ifmgd
;
1723 ifmgd
= &sdata
->u
.mgd
;
1724 INIT_WORK(&ifmgd
->work
, ieee80211_sta_work
);
1725 INIT_WORK(&ifmgd
->monitor_work
, ieee80211_sta_monitor_work
);
1726 INIT_WORK(&ifmgd
->chswitch_work
, ieee80211_chswitch_work
);
1727 INIT_WORK(&ifmgd
->beacon_loss_work
, ieee80211_beacon_loss_work
);
1728 setup_timer(&ifmgd
->timer
, ieee80211_sta_timer
,
1729 (unsigned long) sdata
);
1730 setup_timer(&ifmgd
->bcn_mon_timer
, ieee80211_sta_bcn_mon_timer
,
1731 (unsigned long) sdata
);
1732 setup_timer(&ifmgd
->conn_mon_timer
, ieee80211_sta_conn_mon_timer
,
1733 (unsigned long) sdata
);
1734 setup_timer(&ifmgd
->chswitch_timer
, ieee80211_chswitch_timer
,
1735 (unsigned long) sdata
);
1736 skb_queue_head_init(&ifmgd
->skb_queue
);
1740 mutex_init(&ifmgd
->mtx
);
1742 if (sdata
->local
->hw
.flags
& IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS
)
1743 ifmgd
->req_smps
= IEEE80211_SMPS_AUTOMATIC
;
1745 ifmgd
->req_smps
= IEEE80211_SMPS_OFF
;
1748 /* scan finished notification */
1749 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local
*local
)
1751 struct ieee80211_sub_if_data
*sdata
= local
->scan_sdata
;
1753 /* Restart STA timers */
1755 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
)
1756 ieee80211_restart_sta_timer(sdata
);
1760 int ieee80211_max_network_latency(struct notifier_block
*nb
,
1761 unsigned long data
, void *dummy
)
1763 s32 latency_usec
= (s32
) data
;
1764 struct ieee80211_local
*local
=
1765 container_of(nb
, struct ieee80211_local
,
1766 network_latency_notifier
);
1768 mutex_lock(&local
->iflist_mtx
);
1769 ieee80211_recalc_ps(local
, latency_usec
);
1770 mutex_unlock(&local
->iflist_mtx
);
1776 static enum work_done_result
1777 ieee80211_probe_auth_done(struct ieee80211_work
*wk
,
1778 struct sk_buff
*skb
)
1781 cfg80211_send_auth_timeout(wk
->sdata
->dev
, wk
->filter_ta
);
1782 return WORK_DONE_DESTROY
;
1785 if (wk
->type
== IEEE80211_WORK_AUTH
) {
1786 cfg80211_send_rx_auth(wk
->sdata
->dev
, skb
->data
, skb
->len
);
1787 return WORK_DONE_DESTROY
;
1790 mutex_lock(&wk
->sdata
->u
.mgd
.mtx
);
1791 ieee80211_rx_mgmt_probe_resp(wk
->sdata
, skb
);
1792 mutex_unlock(&wk
->sdata
->u
.mgd
.mtx
);
1794 wk
->type
= IEEE80211_WORK_AUTH
;
1795 wk
->probe_auth
.tries
= 0;
1796 return WORK_DONE_REQUEUE
;
1799 int ieee80211_mgd_auth(struct ieee80211_sub_if_data
*sdata
,
1800 struct cfg80211_auth_request
*req
)
1803 struct ieee80211_work
*wk
;
1806 switch (req
->auth_type
) {
1807 case NL80211_AUTHTYPE_OPEN_SYSTEM
:
1808 auth_alg
= WLAN_AUTH_OPEN
;
1810 case NL80211_AUTHTYPE_SHARED_KEY
:
1811 auth_alg
= WLAN_AUTH_SHARED_KEY
;
1813 case NL80211_AUTHTYPE_FT
:
1814 auth_alg
= WLAN_AUTH_FT
;
1816 case NL80211_AUTHTYPE_NETWORK_EAP
:
1817 auth_alg
= WLAN_AUTH_LEAP
;
1823 wk
= kzalloc(sizeof(*wk
) + req
->ie_len
, GFP_KERNEL
);
1827 memcpy(wk
->filter_ta
, req
->bss
->bssid
, ETH_ALEN
);
1829 if (req
->ie
&& req
->ie_len
) {
1830 memcpy(wk
->ie
, req
->ie
, req
->ie_len
);
1831 wk
->ie_len
= req
->ie_len
;
1834 if (req
->key
&& req
->key_len
) {
1835 wk
->probe_auth
.key_len
= req
->key_len
;
1836 wk
->probe_auth
.key_idx
= req
->key_idx
;
1837 memcpy(wk
->probe_auth
.key
, req
->key
, req
->key_len
);
1840 ssid
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_SSID
);
1841 memcpy(wk
->probe_auth
.ssid
, ssid
+ 2, ssid
[1]);
1842 wk
->probe_auth
.ssid_len
= ssid
[1];
1844 wk
->probe_auth
.algorithm
= auth_alg
;
1845 wk
->probe_auth
.privacy
= req
->bss
->capability
& WLAN_CAPABILITY_PRIVACY
;
1847 /* if we already have a probe, don't probe again */
1848 if (req
->bss
->proberesp_ies
)
1849 wk
->type
= IEEE80211_WORK_AUTH
;
1851 wk
->type
= IEEE80211_WORK_DIRECT_PROBE
;
1852 wk
->chan
= req
->bss
->channel
;
1854 wk
->done
= ieee80211_probe_auth_done
;
1856 ieee80211_add_work(wk
);
1860 static enum work_done_result
ieee80211_assoc_done(struct ieee80211_work
*wk
,
1861 struct sk_buff
*skb
)
1863 struct ieee80211_mgmt
*mgmt
;
1867 cfg80211_send_assoc_timeout(wk
->sdata
->dev
, wk
->filter_ta
);
1868 return WORK_DONE_DESTROY
;
1871 mgmt
= (void *)skb
->data
;
1872 status
= le16_to_cpu(mgmt
->u
.assoc_resp
.status_code
);
1874 if (status
== WLAN_STATUS_SUCCESS
) {
1875 mutex_lock(&wk
->sdata
->u
.mgd
.mtx
);
1876 if (!ieee80211_assoc_success(wk
, mgmt
, skb
->len
)) {
1877 mutex_unlock(&wk
->sdata
->u
.mgd
.mtx
);
1878 /* oops -- internal error -- send timeout for now */
1879 cfg80211_send_assoc_timeout(wk
->sdata
->dev
,
1881 return WORK_DONE_DESTROY
;
1883 mutex_unlock(&wk
->sdata
->u
.mgd
.mtx
);
1886 cfg80211_send_rx_assoc(wk
->sdata
->dev
, skb
->data
, skb
->len
);
1887 return WORK_DONE_DESTROY
;
1890 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data
*sdata
,
1891 struct cfg80211_assoc_request
*req
)
1893 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1894 struct ieee80211_bss
*bss
= (void *)req
->bss
->priv
;
1895 struct ieee80211_work
*wk
;
1899 mutex_lock(&ifmgd
->mtx
);
1900 if (ifmgd
->associated
) {
1901 if (!req
->prev_bssid
||
1902 memcmp(req
->prev_bssid
, ifmgd
->associated
->bssid
,
1905 * We are already associated and the request was not a
1906 * reassociation request from the current BSS, so
1909 mutex_unlock(&ifmgd
->mtx
);
1913 /* Trying to reassociate - clear previous association state */
1914 ieee80211_set_disassoc(sdata
);
1916 mutex_unlock(&ifmgd
->mtx
);
1918 wk
= kzalloc(sizeof(*wk
) + req
->ie_len
, GFP_KERNEL
);
1922 ifmgd
->flags
&= ~IEEE80211_STA_DISABLE_11N
;
1923 ifmgd
->flags
&= ~IEEE80211_STA_NULLFUNC_ACKED
;
1925 for (i
= 0; i
< req
->crypto
.n_ciphers_pairwise
; i
++)
1926 if (req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_WEP40
||
1927 req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_TKIP
||
1928 req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_WEP104
)
1929 ifmgd
->flags
|= IEEE80211_STA_DISABLE_11N
;
1932 if (req
->ie
&& req
->ie_len
) {
1933 memcpy(wk
->ie
, req
->ie
, req
->ie_len
);
1934 wk
->ie_len
= req
->ie_len
;
1938 wk
->assoc
.bss
= req
->bss
;
1940 memcpy(wk
->filter_ta
, req
->bss
->bssid
, ETH_ALEN
);
1942 /* new association always uses requested smps mode */
1943 if (ifmgd
->req_smps
== IEEE80211_SMPS_AUTOMATIC
) {
1944 if (ifmgd
->powersave
)
1945 ifmgd
->ap_smps
= IEEE80211_SMPS_DYNAMIC
;
1947 ifmgd
->ap_smps
= IEEE80211_SMPS_OFF
;
1949 ifmgd
->ap_smps
= ifmgd
->req_smps
;
1951 wk
->assoc
.smps
= ifmgd
->ap_smps
;
1953 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
1954 * We still associate in non-HT mode (11a/b/g) if any one of these
1955 * ciphers is configured as pairwise.
1956 * We can set this to true for non-11n hardware, that'll be checked
1957 * separately along with the peer capabilities.
1959 wk
->assoc
.use_11n
= !(ifmgd
->flags
& IEEE80211_STA_DISABLE_11N
);
1960 wk
->assoc
.capability
= req
->bss
->capability
;
1961 wk
->assoc
.wmm_used
= bss
->wmm_used
;
1962 wk
->assoc
.supp_rates
= bss
->supp_rates
;
1963 wk
->assoc
.supp_rates_len
= bss
->supp_rates_len
;
1964 wk
->assoc
.ht_information_ie
=
1965 ieee80211_bss_get_ie(req
->bss
, WLAN_EID_HT_INFORMATION
);
1967 if (bss
->wmm_used
&& bss
->uapsd_supported
&&
1968 (sdata
->local
->hw
.flags
& IEEE80211_HW_SUPPORTS_UAPSD
)) {
1969 wk
->assoc
.uapsd_used
= true;
1970 ifmgd
->flags
|= IEEE80211_STA_UAPSD_ENABLED
;
1972 wk
->assoc
.uapsd_used
= false;
1973 ifmgd
->flags
&= ~IEEE80211_STA_UAPSD_ENABLED
;
1976 ssid
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_SSID
);
1977 memcpy(wk
->assoc
.ssid
, ssid
+ 2, ssid
[1]);
1978 wk
->assoc
.ssid_len
= ssid
[1];
1980 if (req
->prev_bssid
)
1981 memcpy(wk
->assoc
.prev_bssid
, req
->prev_bssid
, ETH_ALEN
);
1983 wk
->type
= IEEE80211_WORK_ASSOC
;
1984 wk
->chan
= req
->bss
->channel
;
1986 wk
->done
= ieee80211_assoc_done
;
1989 ifmgd
->mfp
= IEEE80211_MFP_REQUIRED
;
1990 ifmgd
->flags
|= IEEE80211_STA_MFP_ENABLED
;
1992 ifmgd
->mfp
= IEEE80211_MFP_DISABLED
;
1993 ifmgd
->flags
&= ~IEEE80211_STA_MFP_ENABLED
;
1996 if (req
->crypto
.control_port
)
1997 ifmgd
->flags
|= IEEE80211_STA_CONTROL_PORT
;
1999 ifmgd
->flags
&= ~IEEE80211_STA_CONTROL_PORT
;
2001 ieee80211_add_work(wk
);
2005 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data
*sdata
,
2006 struct cfg80211_deauth_request
*req
,
2009 struct ieee80211_local
*local
= sdata
->local
;
2010 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2011 struct ieee80211_work
*wk
;
2012 const u8
*bssid
= req
->bss
->bssid
;
2014 mutex_lock(&ifmgd
->mtx
);
2016 if (ifmgd
->associated
== req
->bss
) {
2017 bssid
= req
->bss
->bssid
;
2018 ieee80211_set_disassoc(sdata
);
2019 mutex_unlock(&ifmgd
->mtx
);
2021 bool not_auth_yet
= false;
2023 mutex_unlock(&ifmgd
->mtx
);
2025 mutex_lock(&local
->work_mtx
);
2026 list_for_each_entry(wk
, &local
->work_list
, list
) {
2027 if (wk
->sdata
!= sdata
)
2030 if (wk
->type
!= IEEE80211_WORK_DIRECT_PROBE
&&
2031 wk
->type
!= IEEE80211_WORK_AUTH
)
2034 if (memcmp(req
->bss
->bssid
, wk
->filter_ta
, ETH_ALEN
))
2037 not_auth_yet
= wk
->type
== IEEE80211_WORK_DIRECT_PROBE
;
2038 list_del_rcu(&wk
->list
);
2042 mutex_unlock(&local
->work_mtx
);
2045 * If somebody requests authentication and we haven't
2046 * sent out an auth frame yet there's no need to send
2047 * out a deauth frame either. If the state was PROBE,
2048 * then this is the case. If it's AUTH we have sent a
2049 * frame, and if it's IDLE we have completed the auth
2053 __cfg80211_auth_canceled(sdata
->dev
, bssid
);
2058 printk(KERN_DEBUG
"%s: deauthenticating from %pM by local choice (reason=%d)\n",
2059 sdata
->name
, bssid
, req
->reason_code
);
2061 ieee80211_send_deauth_disassoc(sdata
, bssid
,
2062 IEEE80211_STYPE_DEAUTH
, req
->reason_code
,
2065 ieee80211_recalc_idle(sdata
->local
);
2070 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data
*sdata
,
2071 struct cfg80211_disassoc_request
*req
,
2074 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2076 mutex_lock(&ifmgd
->mtx
);
2079 * cfg80211 should catch this ... but it's racy since
2080 * we can receive a disassoc frame, process it, hand it
2081 * to cfg80211 while that's in a locked section already
2082 * trying to tell us that the user wants to disconnect.
2084 if (ifmgd
->associated
!= req
->bss
) {
2085 mutex_unlock(&ifmgd
->mtx
);
2089 printk(KERN_DEBUG
"%s: disassociating from %pM by local choice (reason=%d)\n",
2090 sdata
->name
, req
->bss
->bssid
, req
->reason_code
);
2092 ieee80211_set_disassoc(sdata
);
2094 mutex_unlock(&ifmgd
->mtx
);
2096 ieee80211_send_deauth_disassoc(sdata
, req
->bss
->bssid
,
2097 IEEE80211_STYPE_DISASSOC
, req
->reason_code
,
2100 ieee80211_recalc_idle(sdata
->local
);
2105 int ieee80211_mgd_action(struct ieee80211_sub_if_data
*sdata
,
2106 struct ieee80211_channel
*chan
,
2107 enum nl80211_channel_type channel_type
,
2108 const u8
*buf
, size_t len
, u64
*cookie
)
2110 struct ieee80211_local
*local
= sdata
->local
;
2111 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2112 struct sk_buff
*skb
;
2114 /* Check that we are on the requested channel for transmission */
2115 if ((chan
!= local
->tmp_channel
||
2116 channel_type
!= local
->tmp_channel_type
) &&
2117 (chan
!= local
->oper_channel
||
2118 channel_type
!= local
->oper_channel_type
))
2121 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ len
);
2124 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
2126 memcpy(skb_put(skb
, len
), buf
, len
);
2128 if (!(ifmgd
->flags
& IEEE80211_STA_MFP_ENABLED
))
2129 IEEE80211_SKB_CB(skb
)->flags
|=
2130 IEEE80211_TX_INTFL_DONT_ENCRYPT
;
2131 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_NL80211_FRAME_TX
|
2132 IEEE80211_TX_CTL_REQ_TX_STATUS
;
2133 skb
->dev
= sdata
->dev
;
2134 ieee80211_tx_skb(sdata
, skb
);
2136 *cookie
= (unsigned long) skb
;