MIPS: Oprofile: Loongson: Cleanup of the macros
[linux-2.6/linux-mips.git] / include / linux / ucb1400.h
blob1b47909110520f72f13ca44d6170a29e61b6eeed
1 /*
2 * Register definitions and functions for:
3 * Philips UCB1400 driver
5 * Based on ucb1400_ts:
6 * Author: Nicolas Pitre
7 * Created: September 25, 2006
8 * Copyright: MontaVista Software, Inc.
10 * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
11 * If something doesnt work and it worked before spliting, e-mail me,
12 * dont bother Nicolas please ;-)
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
18 * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
19 * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
20 * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
23 #ifndef _LINUX__UCB1400_H
24 #define _LINUX__UCB1400_H
26 #include <sound/ac97_codec.h>
27 #include <linux/mutex.h>
28 #include <linux/platform_device.h>
29 #include <linux/gpio.h>
32 * UCB1400 AC-link registers
35 #define UCB_IO_DATA 0x5a
36 #define UCB_IO_DIR 0x5c
37 #define UCB_IE_RIS 0x5e
38 #define UCB_IE_FAL 0x60
39 #define UCB_IE_STATUS 0x62
40 #define UCB_IE_CLEAR 0x62
41 #define UCB_IE_ADC (1 << 11)
42 #define UCB_IE_TSPX (1 << 12)
44 #define UCB_TS_CR 0x64
45 #define UCB_TS_CR_TSMX_POW (1 << 0)
46 #define UCB_TS_CR_TSPX_POW (1 << 1)
47 #define UCB_TS_CR_TSMY_POW (1 << 2)
48 #define UCB_TS_CR_TSPY_POW (1 << 3)
49 #define UCB_TS_CR_TSMX_GND (1 << 4)
50 #define UCB_TS_CR_TSPX_GND (1 << 5)
51 #define UCB_TS_CR_TSMY_GND (1 << 6)
52 #define UCB_TS_CR_TSPY_GND (1 << 7)
53 #define UCB_TS_CR_MODE_INT (0 << 8)
54 #define UCB_TS_CR_MODE_PRES (1 << 8)
55 #define UCB_TS_CR_MODE_POS (2 << 8)
56 #define UCB_TS_CR_BIAS_ENA (1 << 11)
57 #define UCB_TS_CR_TSPX_LOW (1 << 12)
58 #define UCB_TS_CR_TSMX_LOW (1 << 13)
60 #define UCB_ADC_CR 0x66
61 #define UCB_ADC_SYNC_ENA (1 << 0)
62 #define UCB_ADC_VREFBYP_CON (1 << 1)
63 #define UCB_ADC_INP_TSPX (0 << 2)
64 #define UCB_ADC_INP_TSMX (1 << 2)
65 #define UCB_ADC_INP_TSPY (2 << 2)
66 #define UCB_ADC_INP_TSMY (3 << 2)
67 #define UCB_ADC_INP_AD0 (4 << 2)
68 #define UCB_ADC_INP_AD1 (5 << 2)
69 #define UCB_ADC_INP_AD2 (6 << 2)
70 #define UCB_ADC_INP_AD3 (7 << 2)
71 #define UCB_ADC_EXT_REF (1 << 5)
72 #define UCB_ADC_START (1 << 7)
73 #define UCB_ADC_ENA (1 << 15)
75 #define UCB_ADC_DATA 0x68
76 #define UCB_ADC_DAT_VALID (1 << 15)
78 #define UCB_FCSR 0x6c
79 #define UCB_FCSR_AVE (1 << 12)
81 #define UCB_ADC_DAT_MASK 0x3ff
83 #define UCB_ID 0x7e
84 #define UCB_ID_1400 0x4304
86 struct ucb1400_gpio_data {
87 int gpio_offset;
88 int (*gpio_setup)(struct device *dev, int ngpio);
89 int (*gpio_teardown)(struct device *dev, int ngpio);
92 struct ucb1400_gpio {
93 struct gpio_chip gc;
94 struct snd_ac97 *ac97;
97 struct ucb1400_ts {
98 struct input_dev *ts_idev;
99 struct task_struct *ts_task;
100 int id;
101 wait_queue_head_t ts_wait;
102 unsigned int ts_restart:1;
103 int irq;
104 unsigned int irq_pending; /* not bit field shared */
105 struct snd_ac97 *ac97;
108 struct ucb1400 {
109 struct platform_device *ucb1400_ts;
110 struct platform_device *ucb1400_gpio;
113 struct ucb1400_pdata {
114 int irq;
117 static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
119 return ac97->bus->ops->read(ac97, reg);
122 static inline void ucb1400_reg_write(struct snd_ac97 *ac97, u16 reg, u16 val)
124 ac97->bus->ops->write(ac97, reg, val);
127 static inline u16 ucb1400_gpio_get_value(struct snd_ac97 *ac97, u16 gpio)
129 return ucb1400_reg_read(ac97, UCB_IO_DATA) & (1 << gpio);
132 static inline void ucb1400_gpio_set_value(struct snd_ac97 *ac97, u16 gpio,
133 u16 val)
135 ucb1400_reg_write(ac97, UCB_IO_DATA, val ?
136 ucb1400_reg_read(ac97, UCB_IO_DATA) | (1 << gpio) :
137 ucb1400_reg_read(ac97, UCB_IO_DATA) & ~(1 << gpio));
140 static inline u16 ucb1400_gpio_get_direction(struct snd_ac97 *ac97, u16 gpio)
142 return ucb1400_reg_read(ac97, UCB_IO_DIR) & (1 << gpio);
145 static inline void ucb1400_gpio_set_direction(struct snd_ac97 *ac97, u16 gpio,
146 u16 dir)
148 ucb1400_reg_write(ac97, UCB_IO_DIR, dir ?
149 ucb1400_reg_read(ac97, UCB_IO_DIR) | (1 << gpio) :
150 ucb1400_reg_read(ac97, UCB_IO_DIR) & ~(1 << gpio));
153 static inline void ucb1400_adc_enable(struct snd_ac97 *ac97)
155 ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA);
158 static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
160 ucb1400_reg_write(ac97, UCB_ADC_CR, 0);
164 unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
165 int adcsync);
167 #ifdef CONFIG_GPIO_UCB1400
168 void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data);
169 #else
170 static inline void ucb1400_gpio_set_data(struct ucb1400_gpio_data *data) {}
171 #endif
173 #endif